UC-NRLF 
 
 TO WHICH 
 
^ 
 
DETAILS 
 
 TO WHICH 
 
 STANDARD HARDWARE 
 
 CAN BE APPLIED 
 
2/7 
 
 Copyright, 1917, 
 
 by 
 W. R. Hill, Trustee. 
 
 Drawings prepared by Frank M. Snyder, Architefl, 
 New York. 
 
 RUSH 
 CLASS 
 
FOREWORD 
 
 HPH ROUGH long study of the requirements of 
 Architects in reference to Builders' Hardware and 
 Locks, certain standards of size and spacing have been 
 established and recognized by Architects and adopted 
 by Manufacturers. 
 
 They have felt the necessity for a series of easy 
 reference details, clearly fixing the dimensions to which 
 Standard Hardware can be applied, and it is with the 
 view and desire of co-operating with Architects to the 
 end of a quicker, less expensive and more satisfactory 
 service, that, after a great deal of care and considera- 
 tion, this book has been issued. 
 
 The information given covers the minimum re- 
 quirements for hardware for the various types of doors 
 and windows that have become standard in the class 
 of work in which they are used. It is not intended 
 to suggest any architectural or constructional design; 
 the sole purpose being to fix required dimensions. 
 
THE FOLLOWING ARE 
 THE HARDWARE MANUFACTURERS 
 
 UNDER WHOSE AUSPICES 
 THESE DETAILS ARE ISSUED 
 
 Barrows Lock Co., Lockport, 111. 
 Chantrell Hardware and Tool Co., Reading, Pa. 
 
 P. and F. Corbin, New Britain, Conn. 
 The Lockwood Mfg. Co., South Norwalk, Conn. 
 
 Norwalk Lock Co., South Norwalk, Conn. 
 The Peck, Stow and Wilcox Co., Cleveland, O. 
 
 Penn Hardware Co., Reading, Pa. 
 Russell and Erwin Mfg. Co., New Britain, Conn. 
 
 Sager Lock Co., North Chicago, 111. 
 
 Sargent and Company, New Haven, Conn. 
 
 The Taylor and Boggis Foundry Co., Cleveland, O. 
 
 The Yale and Towne Mfg. Co., New York. 
 
THOMAS F. NOLAN, F. A. I. A. 
 
 PROFKSSOR OF ARCHITECTURAL. CONSTRUCTION 
 
 UNIVERSITY OF 
 
 PHILADELPHIA 
 
 As Chairman of the Committee on Materials 
 and Methods of the American Institute of Archi- 
 tects, I am glad to have this opportunity of 
 expressing approval of this much desired pub- 
 lication . 
 
 Yours very truly, 
 
 Professor Nolan also approved the size of these plates, it being in accordance with the 
 recommendation of The American Institute of Architects. 
 
DETAILS FOR STANDARD HARDWARE 
 
 TRIM 
 
 SINGLE ENTRANCE AND VE^TlbVLE 
 
 WITH FLAT FRONTS: NOT BEVELED^ 
 
 USING CYLINDER OB BITTED KEY LOCKS 
 
 BACKSET 
 
 FLAT ERONT LOCKS WITH 2%" BACK5ET5 ' 
 ARE USX/ALLY CARRIED IN STOCK 
 
 CYLINDEE LOCKS MAY BE HAD IN OTHER BACKSETS 
 ON 5PECIAL ORDER.: At AN ADDITIONAL PRICE " 
 
 THICKER DOORS BLOCKS WITH BEVELED FRONTS ~ 
 MAY BE HAP ON SPECIAL ORDER' AT AN ADDITIONAL PRICE 
 
 
 f 
 
 13 FVLL, 5I2E " 
 
 pi, ATE Ncrr 
 
DETAILS FOR STANDARD HARDWARE 
 
 SINGLE ENTRANCE: AND VESTIBVLE 
 
 WITH BEVELED FRONT " 
 USING CTLINDEB LOCK 
 
 fRONT BVLD & IN 2 " " 
 REGULAR BACKSET 24" 
 
 OTHER. BACK5ET5 MAY BE HAD ON SPECIAL ORDER,* 
 AN ADDITIONAL PRICE, 
 
 BACKSET ,? 4 
 
 
 DRAWING 1$ FULL 
 
 PLATE isrcr_2~ 
 
DETAILS FOR STANDARD HARDWARE 
 
 OUBLE ENTRANCE AND VESTIBULE WX& 
 
 WITH RABBETED MEETING STlLES~ 
 
 l/SING CYLINDER, L.OCK 
 
 FOE, LOCKS WITH STANDARD 
 
 3HOVLD BE NOT LE55 THAN 
 
 _L 
 2 
 
 DRAWING IS FVL,L 
 
 PLATE NO J 3 
 
DETAILS FOR STANDARD HARDWARE 
 
 ENVRANCE: AND VESTIBULE IBDRS 
 
 WITH FLAT ASTRAGAL MEETING 
 
 USING CYLINDER LOCK 
 FRONT BEVELED i" IN 2,* ~ 
 
 BAGKSET 2 
 
 MAY BE HAP ON 
 AT AN ADDITIONAL PRICE! " 
 
 & 
 
 f 
 
 DRAWING IS FVLL, SIZE 
 
 NQ-4." 
 
DETAILS FOR STANDARD HARDWARE 
 
 INTERIOR DOOR 
 
 WITH FLAT FRONT : NOT BEVELED 
 USING BITTED KEY LOCK~ 
 
 FOB LOCKS WITH STANDARD BACKSETS " 
 STILES SHOULD B NOT LSS THAN 4i" ' 
 
 FOE THICKER DOOR5 "LOcK^ \VlTH 
 
 MAY 5K HAD ON 5P2C1AL ORP^E AT AN ADDITIONAL 
 
 . 
 
 L 
 
 .STOP 
 
 DE/XWING IS FULL 5IZE 
 
 PLATE NO" 5' 
 
DETAILS FOR STANDARD HARDWARE 
 
 DOUBLE INTERIOR DOORS " 
 
 WITH RABBETED MEETING STILES' 
 USING BITTED KEY LOCK" 
 
 FOR LOCK.S WITH STANDARD BACKSETS 
 ST1LE5 SHOULD B NOT LESS THAN 
 ON NAEEOW SIDE " 
 
 rv 
 
 DRAWING IS FVLL SIZE " 
 
 NO- e 
 
DETAILS FOR STANDARD HARDWARE 
 
 SINGLE SLIDING POOE " 
 
 WITH F%AT FRONT " 
 
 THE STILE! "AS SHOWN ~T3 SUITABLE 
 Ft>E LOCK WITH STANDARD BACKSET 
 
 STbP 
 
 \ 
 
 7 
 
 DRAWING IS F'VLL SIZE 
 
DETAILS FOR STANDARD HARDWARE 
 
 DO\JBL SLIDING DOORS 
 
 WITH FLAT ASTRAGAL MEETING STILES " 
 
 THE STIL^ "AS SHOWN * IS 
 
 FtK. LOCK WITH STANDARD BACKSET 
 
 \ 
 
 l_ 
 
 DRAWING IS ?\)LL SIZE 
 
DETAILS FOR STANDARD HARDWARE 
 
 NAEBDW STII^E DOOR" 
 
 WITH BEVELED FRONT " 
 1/5ING CYLINDER LOCK " 
 
 fRONT BEVELED IN 
 
 2 
 
 REGULAR, BACKSET 2 " " 
 
 THE 5TiL SHOULD BE: NOT L$$ THAN 3 1 
 NARROWER BACKSE:^ MAY B HAD ON SPECIAL 
 
 OE>R w AT 1 AN APPiriOKAL 
 
 3 
 
 2^" 
 
 "1 
 
 a 
 
 r l 
 
 
 DRAWING IS EULL SIZE 
 
 NO" 9 " 
 
DETAILS FOR STANDARD HARDWARE 
 
 DOUBLJB NARROW STILE 
 
 WITH FLAT ^STKAGAL MEETING STlLES 
 USING CYLINDER, LOCK u 
 
 BEVELED iriN 2" " 
 
 BEGULAR, BACKSET J2 " 
 
 rH STILUS SHOULD BE, NOT LESS THAN 3 " M 
 
 MAY B HAD ON. SPECIAL 
 AT AN ADDiriONAL PElCEi 
 
 DRAWING IS FVLL 
 
 PLATE NO W ICT 
 
DETAILS FOR STANDARD HARDWARE 
 
 NARROW STILE DOORS ~ 
 
 WITH RABBETED MEETING STILES 
 USING CYLINDER LOCK 
 
 THE: STILES SHOULD BE: NOT 
 
 ON HARROW 
 
 THAN 3" 
 
 L.OCKS FOE, NARROWER STILUS MAT E> HAD ON 
 3PECIAL ORDKR " AT AN ADDITIONAL 
 
 DRAWING IS FULL SIZE 
 
 ELATE NO -11" 
 
DETAILS FOR STANDARD HARDWARE 
 
 SINGLE NAERQW $TII_IE>OR" 
 
 WITH FLAT FRONT : NOT BEVELED ' 
 USING BITTED KEY LOCK " 
 
 REGULAR, BACKSET ii"~ 
 
 THE STILES SHOULD BE NOT LESS THAN 3" " 
 
 OTHER BACKSETS MAY BE HAD ON SPECIAL 
 ORDER " AT AN ADDITIONAL PRICE 
 
 FOR THICKER DGDKS * LOCKS WITH BEVELED FRONTS " 
 MAY BE HAD ON SPECIAL OEDEE. U AT AN ADDITIONAL PEICE' 
 
 1 
 
 
 
 
 - ^**i 
 
 'V 
 
 ( 
 > 
 
 i 
 
 r 
 
 
 S T 
 
 3 
 
 i 
 
 fe 
 
 i 
 
 j 
 
 
 
 i 2 
 
 STOP^ 
 
 * 
 
 3" 
 
 ^ "~5 
 
 D2AWINC3 IS FVLL 
 
DETAILS FOR STANDARD HARDWARE 
 
 E NARROW STILE DOOR$~ 
 
 WITH FLAT ASTRAGAL MEETING STILES 
 USING BITTED KEY LOOT 
 
 WITH "Ft AT ERONT : NOT BEVELED^ 
 
 REGULAR, 3ACKSET li" u 
 
 THE; STILES SHOULD BE: NOT LESS THAN 3"" 
 
 BACKSETS MAT B^ HAD ON SPECIAL 
 ORDEE - AT AN ADDITIONAL 
 
 THICKER DOOK.$" LQCK^ WITH BEVELED FRONTS" 
 MAT BE HAD ON SPECIAL ORDER ~AT AN ADDITIONAL PRICE" 
 
 
 IS 
 
 PLATE NO^IS 
 
DETAILS FOR STANDARD HARDWARE 
 
 DOUBLE NAEEOW STIL DOORS 
 
 WITH RABBETED MEETING STILES ~ 
 USING BITTED KEY LOCK 
 
 THE STILUS SHOULD BE NOT LESS THAN 3 " ~ 
 ON NARROW 
 
 LOCKS FOR, NARROWER STILES MAY BE HAP ON 
 SPECIAL ORDER "AT AN ADDITIONAL PRICE " 
 
 DRAVVING IS FVLL 
 
DETAILS FOR STANDARD HARDWARE 
 
 SINGLE CASEMENT SASH 'O 
 
 USING RIM OR MORTISE CASEMENT 
 
 AND ADJUSTER ~ 
 
 OK, 
 
 FOR, 6ASH NOT 1 
 
 4' O" HIGH 
 
 ARE M1N1MVM 
 
 DRAWING IS 
 
 FULL 
 t 
 
 I 
 
 PLATE 
 
 15 
 
DETAILS FOR STANDARD HARDWARE 
 
 SINGLE CASEMENT SASH "OPENING OUT 
 
 USING RIM OEMORTI52 CASEMENT 
 OR TVEN3VCKLE; w w AND 
 
 5A5H NOT 
 
 4:0" HIGH " 
 
 SECTION 
 AT 
 
 SAME: 
 
 JAMB 
 
 ARE 
 
 ALLOW 2 " 
 
 DRAWING 1S 
 FULL 
 
 MINIMUM 
 
DETAILS FOR STANDARD HARDWARE 
 
 DOUBLE CASEMENT SASH'CFfifflsG O/T 
 
 WITH KABEfiTfiD MEETING STIL5S 
 
 U5INS EIM OR. MORTISE, CASEMENT 
 OR, TURN3VCKLE " AND 
 
 5A3H NOT OV^K, 4.b' HIGH 
 
 h 
 
 VJ 
 
 
 
 SElOT 
 
 WHEN INSIDE 
 
 ALLOW J2 
 
 AND5A5H 
 
 IN5IDK JAMB 
 
 MIHIMVM FOB 
 STANDARD 
 HARDWARE w 
 
 DRAWING 
 FVLL SIZE 
 
DETAILS FOR STANDARD HARDWARE 
 
 I 
 
 SA$H"OPNING IN 
 
 WITH RABBETED MEETING STILES" 
 
 USING RIM OR MORTISE; CASEMENT FASTENER' 
 
 OR TVRNBUCKLE^AND ADJU 
 fOR. $A$H TW OV#R 4:0" HIGH " 
 
 \ 
 
 L_t 
 
 DRA\V1NGIS 
 FULL 
 
 I 
 
 H 
 
 MINIMUM 
 STANDARD 
 
 - /i v 
 
 NO "is 
 
DETAILS FOR STANDARD HARDWARE 
 
 DOUBLE C/SEMEMT SA?H~OPNING O/T 
 
 WITH FLAT ASTRAGAL MEETING STILES ~ 
 
 USING RIM OR MORTISE CASEMENT FASTENER " 
 OR TURNBUCKLE" ^AKD 
 
 SASH NOT OVER, 4;o" HIGH 
 
 GIVEN ARE: 
 
 MINIMUM 
 
 STANDARD 
 
 HARDWARE 
 
 ALLOW 2, 
 
 DEAWING IS 
 ULL 
 
 PLATE NO 19 
 
DETAILS FOR STANDARD HARDWARE 
 
 DOUBLE CASEJ/i 
 
 FRENCH 
 U5ING E5PAGNOLE1 
 
 OPINING IN 1 
 
 TE 
 
 MEETIN< 
 BOLT "AN! 
 
 GIVEN 
 
 MINIMUM Ft)E 
 STANDARD HARDWARE , 
 
 DRAWING IS 
 
 FULL 
 
 PLATE 
 
 ) AI 
 
 A" 
 
 STILES 
 
 TEES" 
 
DETAILS FOR STANDARD HARDWARE 
 
 DOUBLE 
 
 Lvxi tt 
 
 WITH RABBETED A 
 USING ESPAGNOIX 
 
 BNT SASfTOFI 
 
 iNING 
 
 ^0^5" 
 STER5 
 
 ,TR^ 
 
 TE : 
 
 ^S\s~- 
 
 .GAL MEETD 
 ^OLT-'ANP / 
 
 G ^ 
 
 DJU 
 
 "vr* iy 
 
 MINIMUM 
 
 DRAWING 1 
 FULL 
 
 PLATE 
 
DETAILS FOR STANDARD HARDWARE 
 
 ,'f 
 
 SINGLE CASEMENT 
 
 USING 
 
 IN 
 
 BOLT "AN! 
 
 ) ADJUSTER; 
 
 DE/WV1NG IS 
 FULL 
 
DETAILS FOR STANDARD HARDWARE 
 
 SINGLE CASMN"T SASH'CFfiNING 
 
 U5ING CREMONE BOLT w AND ADJUSTER " 
 
 INSIT>E 
 
 INSIDE 
 
 ALLOW 3 
 SCEEENAKD SASH 
 
 15 V 
 
 SIZE- 
 
 it" 
 
 MTNUWM 
 
 FL/tfE 
 
DETAILS FOR STANDARD HARDWARE 
 
 WITH FRENCH 
 
 USING CREMONE BOLT 
 
 
 MEETtf 
 
 AKD ADJl 
 
 G 
 
 MEASVKEMENTS 
 ARE! MINIMUM 
 
 HARDWARE 
 
 D2 AWING IS 
 PVLL 
 
 i 
 
 X 
 
 IN 
 
DETAILS FOR STANDARD HARDWARE 
 
 DOUBLE c :ASEMEN r 5A$H ^c PINING our 
 
 FREN- 
 
 U3ING 
 
 :H 
 
 BQLT 
 
 ': 
 
 ANP 
 
 WHN IN5IPI: SCREENS 
 
 ARE! vsHD" ALLOW 3" 
 
 ANP 
 
 DRAWING 1 
 FULL SIZE" 
 
 2: 
 
 
 
 s 
 _,_ 
 
 PLATE NO 
 
 
 VHN1MUM F* 
 STANDARD 
 
DETAILS FOR STANDARD HARDWARE 
 
 , 
 
 WITH 
 USING 
 
 ;THP 
 
 MINIMUM 
 
 DRAWING 
 
 SIZH 
 
 BO 
 
 TSASfTOPIlNINGIN 
 
 GAL MEE1 
 
 HD 
 
 li" 
 
 ST1LE5 
 
 J i. 
 
DETAILS FOR STANDARD HARDWARE 
 
 DOUBLE HUNG 5A$H " 
 
 BOTTOM. RAIL, AND ]vffiET!NG KAILS 
 USING SASH LIFTS AND LOCKS" 
 
 t , 
 
 - 
 
 PLATE NCT27 
 
 GIVEN 
 
 MINIMUM FOR 
 5TANPARP HARDWARE" 
 
 DRAWING IS FVLL 5IZE' 
 
QUARTER 
 
 - BERKELEY 
 , LA 94720 
 
 s 
 
 FORM NO. DD,3, 30m 
 
U.C. BERKELEY LIBRARIES