Country Profile

Quality assurance as an integral component of diagnostic testing in clinical laboratories and point-of-care testing: The Uganda experience

Steven Aisu, Wilson Nyegenye, Victor Bigira, Charles Kiyaga, Michael Dfendu, Sam Acellam, Richard Walwema, Lydia Nakiyingi, Isaac Sewanyana, Aida Namakula, Richard Batamwita, William Lali

Received: 24 Mar. 2016; Accepted: 11 Aug. 2016; Published: 17 Oct. 2016

Copyright: © 2016. The Author(s). Licensee: AOSIS.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

HIV situation in Uganda

Uganda, with an estimated population of 35 million people, is a landlocked country that forms part of the East African Union member states. The country is divided into nine political regions (Figure 1), in which there are 112 administrative districts. In order to make the administration and coordination of health services more efficient, the country is further divided into 14 health regions.

FIGURE 1: Key HIV statistics in Uganda, 2014, showing HIV prevalence by region.

Uganda is classified as a high burden HIV country with an estimated 1.6 million people living with HIV/AIDS and 140 000 new cases reported annually (Table 1; Figure 1).¹ Being one of only two countries where incidence was on the rise in 2013, HIV remains a major public health problem in Uganda.² HIV prevalence varies across the country, being highest in the Central region and near urban centres and lowest in the mid-eastern and West Nile regions.

In 2013, the World Health Organization changed the recommendation for initiation of antiretroviral therapy from a CD4 count of 350 cells/mm³ to 500 cells/mm³.³ Uganda was one of the first countries to adopt these recommendations and began implementing the revised treatment guidelines in April 2014.⁴ Under the revised antiretroviral therapy guidelines, CD4 enumeration remains critical to staging the need for antiretroviral therapy among HIV-positive patients aged 15 years and above.⁵ In addition, the World Health Organization recommended the use of viral load testing as the preferred antiretroviral therapy monitoring approach. The Ministry of Health in Uganda subsequently adopted viral load monitoring for antiretroviral therapy patients into the national guidelines. Uganda’s viral load programme has since scaled up rapidly, but universal access has not yet been achieved. For patients who do not have access to viral load services, CD4 testing remains essential for monitoring antiretroviral therapy response. As Uganda scales up the new World Health Organization/UNAIDS 90-90-90 strategy,⁶ there has been a steep rise in the number of people in need of HIV testing and viral load monitoring across the country. It is estimated that over 850 000 people will be on antiretroviral therapy by the end of 2016. Meeting these targets will require innovative ways of developing laboratory systems, including scaling up of point-of-care (POC) tests for HIV testing, diagnosis of opportunistic infections and monitoring response to treatment or disease progression.

Uganda’s laboratory infrastructure and HIV-related testing services

The laboratory network in Uganda consists of a five-tiered system covering the following levels: national, regional, general hospital (district), health centre IV and health centre III. Laboratories at national, regional and district levels are relatively well developed, whereas laboratories at lower health centre IV and III level generally have inadequate space, no running water, frequent power interruptions and inadequate working space. In order to overcome some of these challenges, the country has established a national sample and results referral network based on hubs. A hub is a high volume laboratory that functions as a referral laboratory for 30–40 lower level laboratories. Complex tests that cannot be handled at the hub, such as early infant diagnosis (EID), viral load testing, culture for tuberculosis and outbreak investigation samples, among others, are centralised at the Central Public Health Laboratory (CPHL) and other reference laboratories.^7,8,9

Although testing capacity has been increased through deployment of modern high-throughput equipment, national testing targets for EID and viral load have not yet been met. It can be argued that lack of, or limited access to, laboratory services may be overcome through centralisation of testing services and building of new laboratories. However, this course of action requires substantial investment and could result in a significant delay. Moreover, there is a nagging fear that if donor funding is significantly reduced or entirely stopped, such projects may be rendered ‘white elephants’. Cognisant of such possibilities, over the last few years, Uganda has adopted a combination of conventional testing platforms at higher level health facilities and POC testing at lower level health facilities. Thus, in Uganda, EID and viral load testing use Roche Molecular Diagnostics and Abbott Molecular laboratory methods, while CD4 and HIV testing use a mix of conventional analysers and POC devices, including BD FACSCalibur^®, BD FACSCount^®, Partec CyFlow^® Counter and Alere Pima™ for CD4 counts, and ELISA and rapid diagnostics tests for HIV. In addition, BD MGIT is used for tuberculosis cultures and Cepheid GeneXpert^® for PCR. POC tests are deployed in remote rural areas or where test volumes are low, while conventional analysers are used mainly at hubs and in urban areas.

Quality assurance in Uganda

Current quality assurance situation

The quality assurance programme in Uganda is still in its infancy. Like many African countries, Uganda has adopted the Strengthening Laboratory Management Towards Accreditation and Stepwise Laboratory Quality Improvement Process Towards Accreditation approaches to improving quality systems in laboratories. However, the supporting components to this programme, such as internal quality control procedures and external quality assessment (EQA), are quite weak. Although CPHL has put in place some measures in collaboration with the Uganda Virus Research Institute, the National Tuberculosis and Leprosy Control Program, the Infectious Diseases Institute and the National Drug Authority to carry out some EQA functions, major gaps still exist. There is poor EQA coverage, particularly for POC testing; low response rates from participating facilities and lack of a comprehensive corrective action plans to support poorly performing laboratories. Only panels for HIV testing and tuberculosis smear microscopy are produced locally, whereas panels for clinical chemistry, haematology, bacteriology, CD4 counts and viral load are supplied by external agencies. The EQA schemes and suppliers are not centrally coordinated. Because Uganda anticipates a rapid scale up of POC testing, CPHL has developed plans to review the POC quality assurance policies and framework.

Laboratory and point-of-care quality assurance policy and framework in Uganda

Current status of point-of-care quality assurance policy and framework

Uganda has a National Health Laboratory Policy and Strategic Plan that guides the implementation of Laboratory Quality Management systems across the health laboratory services. However, the strategies do not explicitly address POC testing deployment or POC testing quality issues. Therefore, there is a need to review the National Laboratory Policy and Strategic Plan so as to address quality systems for POC testing.

Table 2 shows the results of a rapid assessment of the POC testing quality assurance policy and framework. While there is top-level leadership engagement (estimated score 80%), major gaps still exist for coordination at the national level (60%), definition of roles and responsibilities (60%), policies and strategic plans (40%), and availability of National Laboratory Standards (30%).

External quality assurance reforms for point-of-care testing

A functional EQA scheme consists of six key components (Figure 2), specifically: plan, define, implement, monitor, improve and evaluate. These components are arranged in a cyclical manner to demonstrate the concept of continual improvement.

FIGURE 2: Components of a functional EQA scheme.

In Uganda, implementation of the EQA scheme will be done in three phases, as outlined below.

Phase 1: Plan an HIV-related point-of-care testing quality system

Planning and developing an HIV-related POC quality system requires the review of the current guidelines and standards, and therefore requires the engagement of relevant leaders to execute the activities. With leadership engagement, establishment of the national quality assurance coordination team is easier and the roles and responsibilities of the selected teams can be defined (Figure 3). Before defining the expected quality of POC tests, there is a related need to conduct a situational analysis that may include mapping disease prevalence, as well as selecting and assessing sites. With the abovementioned background activity, the implementation plan will be developed with the further incorporation of quality assurance and policies. Finally, a financial plan will be drafted with an emphasis on human resources and cost–benefit analysis.

FIGURE 3: Proposed national external quality assessment coordination structure.

Phase 2: Implement quality assurance for point-of-care testing

The implementation strategy for quality assurance of POC testing requires quality assurance training and certification. This will further involve activities such as the process control, audits, site support supervision and mentorship, all of which constitute the fundamental components of capacity building. Establishment of EQA (active, intermediate, passive) production, packaging/shipping through hubs, programme management and outsourcing will be implemented when the need arises (Figure 4). The quality assurance supply chain and logistics programme can continuously be strengthened for improvement.

FIGURE 4: Proposed courier system for the flow of national external quality assessment materials, forms, results and feedback.

Phase 3: Sustain the quality assurance programme

For the sustainability of the quality assurance programme planning, allocation of resources and continuous encouragement of socio-economic entrepreneurship are required. Sustainability implementation will require focused monitoring and evaluation initiatives, country ownership and involvement, a high level of advocacy, and mobilisation of the community. Feedback, corrective action and inter-lab comparisons are vital for quality assurance programmes, as these are the basis for improvement.

Cost of activities and resources for quality assurance improvement

Estimating the cost of EQA activities will include understanding the country’s needs based on identified interventions to inform key policy decisions and reducing high costs. External support will be sought to price the final model of service provision and to establish a cost-effective POC testing EQA scheme that is integrated in a comprehensive National EQA Program. In cases where it will be necessary to produce EQA panels locally, the activity will be undertaken by the Uganda National Health Laboratory and respective reference laboratories. EQA materials will be distributed using the hub system. Technical assistance and other resources will be mobilised both internally and externally to support the programme.

Conclusion and way forward

Uganda is actively working to implement a robust quality assurance programme that will address POC testing in the country. Although the quality assurance programme is still in its infancy, Uganda has already adopted Strengthening Laboratory Management Towards Accreditation and Stepwise Laboratory Quality Improvement Process Towards Accreditation to improve overall laboratory quality systems and is focusing on how to improve internal quality control procedures and EQA.

Uganda has always taken great strides to meet challenges with innovative approaches. The country established a national sample and results referral network based on hubs to improve EID services, which also resulted in cost savings for the programme and in turn improved other health services. More recently, Uganda performed a rapid assessment of the POC testing quality assurance policy and framework to identify major gaps that should be addressed.

Uganda understands the strength of working in a collaborative manner with all institutions to implement a sustainable country-owned EQA programme. CPHL is working with the Uganda Virus Research Institute, the National Tuberculosis and Leprosy Control Program, the Infectious Diseases Institute and the National Drug Authority to plan and carry out EQA functions necessary to support quality CD4, EID, and viral load services.

Acknowledgements

The authors thank the Ministry of Health, the development partners and all the implementing partners within the health system of the country.

The authors declare that they have no financial or personal relationship(s) that may have inappropriately influenced them in writing this article.

None.

References