key: cord-1037129-guijzqcd authors: Alshammari, Farhan; Alshammari, Bushra; Moin, Afrasim; Alamri, Abdulwahab; Al Hagbani, Turki; Alobaida, Ahmed; Baker, Abu; Khan, Salman; Rizvi, Syed Mohd Danish title: Ceftriaxone Mediated Synthesized Gold Nanoparticles: A Nano-Therapeutic Tool to Target Bacterial Resistance date: 2021-11-08 journal: Pharmaceutics DOI: 10.3390/pharmaceutics13111896 sha: 256e6a51cdf0fa2ba793154e19f68341e5517408 doc_id: 1037129 cord_uid: guijzqcd Ceftriaxone has been a part of therapeutic regime for combating some of the most aggressive bacterial infections in the last few decades. However, increasing bacterial resistance towards ceftriaxone and other third generation cephalosporin antibiotics has raised serious clinical concerns especially due to their misuse in the COVID-19 era. Advancement in nanotechnology has converted nano-therapeutic vision into a plausible reality with better targeting and reduced drug consumption. Thus, in the present study, gold nanoparticles (GNPs) were synthesized by using ceftriaxone antibiotic that acts as a reducing as well as capping agent. Ceftriaxone-loaded GNPs (CGNPs) were initially characterized by UV-visible spectroscopy, DLS, Zeta potential, Electron microscopy and FT-IR. However, a TEM micrograph showed a uniform size of 21 ± 1 nm for the synthesized CGNPs. Further, both (CGNPs) and pure ceftriaxone were examined for their efficacy against Escherichia coli, Staphylococcus aureus, Salmonella abony and Klebsiella pneumoniae. CGNPs showed MIC(50) as 1.39, 1.6, 1.1 and 0.9 µg/mL against E. coli, S. aureus, S. abony and K. pneumoniae, respectively. Interestingly, CGNPs showed two times better efficacy when compared with pure ceftriaxone against the tested bacterial strains. Restoring the potential of unresponsive or less efficient ceftriaxone via gold nanoformulations is the most alluring concept of the whole study. Moreover, applicability of the findings from bench to bedside needs further validation. According to Centers for Disease Control and Prevention (CDC) threat report on antibiotic resistance (2019) [1] , every year around 2.8 million cases of resistant bacterial infection occur in the United States alone with 35 K mortality. However, COVID-19 coinfection with antibiotic-resistant bacterial pathogens has raised a serious clinical issue now-adays. The situation has worsened due to the increasing trend of self-medication of antibiotics in the COVID-19 era [2] . One such antibiotic is ceftriaxone, and scientists have grave concerns over the cautious use of antibiotics in COVID-19 management [3] . In fact, ceftriaxone is often prescribed to treat a wide range of bacterial infections, such as meningitis, bone infections, joints, middle ear, intra-abdominal, skin, and pelvic inflammatory diseases [4] . On the other hand, ceftriaxone resistance has also increased many fold in the recent past [5] [6] [7] . Thus, alternative novel approaches to tackle the current scenario are urgently needed, and nanotechnology appears to deliver a plausible solution to these resistant issues. All the chemicals, microbiological media and reagents, such as, Mueller-Hinton agar, ceftriaxone sodium and tetra chloroauric [III] acid (HAHuCl 4 ) were procured from Sigma-Aldrich (St. Louis, MO, USA). The reaction for the synthesis of CGNPs was performed at temperatures of 30 • C, 40 • C, 50 • C and 60 • C by adding ceftriaxone at concentrations of 50, 100, 150, 200, and 250 µg/mL to a 1 mL reaction mixture and incubating for 48 h. However, the reaction mixture consisted of 1 mM HAuCl 4 in 50 mM phosphate buffer at pH 7.4. An autonomous reaction was performed for the control without ceftriaxone. At ten distinct time points, the mixture was removed and analyzed by UV-visible spectroscopy. The CGNPs were collected by centrifugation at 30,000× g for 30 min after the completion of the reaction. The CGNPs were then washed twice by Milli Q water followed by a final wash with 50% v/v ethanol to remove unbounded materials. For further analysis, the resultant CGNPs were used. For comparative analysis, the Khan et al. [24] method was applied to synthesize GNPs by bromelain (where bromelain acts as a reducing as well as stabilizing agent) to keep them as control naked GNPs (without ceftriaxone). The GNPs (control) and CGNPs were characterized via UV-vis spectrophotometry using a Shimadzu dual-beam spectrophotometer (UV-1601 PC, Shimadzu, Tokyo, Japan) at a resolution of 1 nm. The mean particle size of GNPs and CGNPs was measured with a DLS particle size analyzer (Zetasizer Nano-ZS, Malvern Instrument Ltd., Malvern, UK). The sample was taken in a DTS0112-low volume disposable sizing cuvette of 1.5 mL. The sample was sonicated for 1 min and filtered through syringe membrane filters with pores less than 0.45 µm before measurement. The mean particle size was determined by calculating the average of the measurements of a single sample in triplicate. Zeta potential was also measured to observe the nature of charge present on the surface of each sample by using Zetasizer Nano-ZS, Malvern Instrument Ltd., Malvern, UK. For zeta potential, DTS1070 disposable cuvette was used. A drop from each sample, GNPs and CGNPs solutions, was deposited onto a conductive silicon substrate and dried on a hotplate at 60 • C for 20 min. The morphology of deposited GNPs and CGNPs on Si substrates were then imaged using FEI quanta 250 SEM (FEI Company, Hillsboro, OR, USA) with an accelerating voltage of 30 KV and a spot size of 3 nm. TEM was performed using a Tecnai™ G2 Spirit Bio-TWIN equipped with a CCD camera (GatanDigital, Hillsboro, OR, USA). CGNPs sample was prepared using a carboncoated TEM copper grid. FTIR (Shimadzu FTIR-8201 PC, PerkinElmer Inc., Waltham, MA, USA) was used to analyze the binding conformation and changes in secondary structures on the ceftriaxone present on the surface of CGNPs. The instrument was operated in diffuse reflectance mode at a resolution of 4 cm −1 to obtain good signal-to-noise ratios, 256 scans of CGNP films were obtained at a range of 400-4000 cm −1 . The ceftriaxone loading efficacy onto GNPs was evaluated by using the methodology of Gomes et al. [25] as applied in Shaikh et al. [26] . Once the CGNPs were synthesized (without washing), the samples were centrifuged at 30,000× g for 30 min. Ceftriaxone in the supernatant was quantified by using UV-Visible spectrophotometer (λmax 241) after scanning [27, 28] . However, the 5-70 µg/mL concentration range was used to plot calibration curve of ceftriaxone. For evaluating ceftriaxone loading efficacy, free ceftriaxone present in the supernatant was subtracted from the initial amount added for the CGNPs synthesis. The following equation was used to evaluate the % of loading efficacy: The loading efficacy of ceftriaxone onto GNPs was also estimated by using the modified methodology of Pal et al. [29] . Shimadzu HPLC model fitted with UV/VIS detector (SPD-20A), AT pump (LC-20) and rheodyne injector with a 20-µL loop were used. Samples were analyzed on a reverse phase C-18 (Luna −5 µm, 250 × 4.6 mm inner diameter) column at 25 • C by applying a mobile phase (0.01 M KH2PO4:ACN buffer in 85:15 ratio) with 1 mL/min flow rate and UV-detection at 241 nm. Spinchrom software was used to record and evaluate the data. Before analyzing, a 0.22 µm filter was used to filter the mobile phase. Each sample was run in triplicate, and a calibration curve was plotted by using 5-70 µg/mL concentration of ceftriaxone. The amount of unbound ceftriaxone was calculated by using Escherichia coli (ATCC 25922), Klebsiella pneumoniae (ATCC 13883), Salmonella abony (NCIM 2257) and Staphylococcus aureus (ATCC 25923) were obtained from National Chemical Laboratory, India. Luria-Bertani (LB) broth was used to prepare fresh inoculum for each bacterial strain and incubated at 37 • C for 18 h. Prior to antibacterial activity, LB broth was used to adjust the turbidity of culture to 0.5 McFarland standard i.e., 1.5 × 10 8 CFU/mL. Before performing the antibacterial assay, solutions were prepared by dispersing the synthesized CGNPs, GNPs (control) and ceftriaxone in PBS (phosphate saline buffer at pH 7.4). The agar well diffusion method was applied to assess the potency of synthesized CGNPs [30] . Fresh bacterial culture for each strain was spread on Mueller-Hinton agar and 6 mm wells were cut on 1 mg/mL) and GNPs (control) were dispensed in the wells. All the experiments were performed in triplicate, and the agar plates were placed in an incubator at a temperature of 37 • C overnight. The diameter of the zone of inhibition was measured. The synthesized CGNPs and ceftriaxone were tested against bacterial strains to determine their minimum inhibitory concentrations (MICs) by employing the broth microdilution method of Eloff [31] . To achieve the concentrations ranging from 0.025-32 µg/mL, aliquots of CGNPs and ceftriaxone were serially diluted in 96-well microtiter plates containing LB broth medium. The tested strains were cultured overnight in LB broth, and their turbidity was adjusted to 0.5 McFarland standard (1.5 × 10 8 CFU/mL), following these plates. A total of 50 µL of CGNPs (200 µg/mL ceftriaxone), ceftriaxone (which, 10 µL of the standard suspensions was placed in the aliquots. MICs are the lowest concentrations of synthesized CGNPs that completely inhibit bacterial growth after being incubated at 37 • C for 20 h. Several biomolecules and chemicals have been utilized as capping and reducing agents in the synthesis of multi-purpose inorganic nanoparticles [32] . Generally, conjugation of antibiotic/drug is performed on pre-formed GNPs by using different strategies. GNPs are synthesized either by chemicals (such as sodium borohydrate and trisodium citrate) or by herbal extracts and natural enzymes before conjugating antibiotics onto them [26, [33] [34] [35] . In both the cases, residual contamination might create a doubt on the actual antibacterial results. Typically, gold salt reduction followed by nucleation and nuclei growth leads to the synthesis of GNPs, and synthesized GNPs need a capping agent to be stabilized [36] [37] [38] . The highlight of the present study is that ceftriaxone acted as both reducing and capping/stabilizing agents for the synthesis of (ceftriaxone loaded gold nanoparticles) CGNPs ( Figure 1 ). It is a fact that by changing the concentration of reducing agent (especially when it acts as a reducing as well as capping agent) and experimental conditions, the size of GNPs can be controlled [36] [37] [38] . Here, the different concentrations of ceftriaxone along with different temperature conditions were applied to synthesize CGNPs. Finally, the 250 µg/mL ceftriaxone concentration was selected to reduce HAuCl 4 to GNPs to obtain the Pharmaceutics 2021, 13, 1896 5 of 13 desired size at a temperature of 40 • C and pH of 7.4. Khan et al. [24] and Khan et al. [39] have also applied the same strategy to synthesize GNPs of various sizes using bromelain and trypsin as reducing and capping agents. Similarly, the properties such as size, shape, mono-dispersity and stability of CGNPs in the present study basically relied on ceftriaxone concentration and temperature used for the reaction (data not shown for brevity). The synthesized GNPs and CGNPs showed visible characteristic color changes from yellow to ruby red ( Figure S1 ). synthesis of GNPs, and synthesized GNPs need a capping agent to be stabilized [36] [37] [38] . The highlight of the present study is that ceftriaxone acted as both reducing and capping/stabilizing agents for the synthesis of (ceftriaxone loaded gold nanoparticles) CGNPs ( Figure 1 ). It is a fact that by changing the concentration of reducing agent (especially when it acts as a reducing as well as capping agent) and experimental conditions, the size of GNPs can be controlled [36] [37] [38] . Here, the different concentrations of ceftriaxone along with different temperature conditions were applied to synthesize CGNPs. Finally, the 250 µg/mL ceftriaxone concentration was selected to reduce HAuCl4 to GNPs to obtain the desired size at a temperature of 40 °C and pH of 7.4. Khan et al. [24] and Khan et al. [39] have also applied the same strategy to synthesize GNPs of various sizes using bromelain and trypsin as reducing and capping agents. Similarly, the properties such as size, shape, mono-dispersity and stability of CGNPs in the present study basically relied on ceftriaxone concentration and temperature used for the reaction (data not shown for brevity). The synthesized GNPs and CGNPs showed visible characteristic color changes from yellow to ruby red ( Figure S1 ). Typical 'Surface Plasma Resonance' band patterns for synthesized gold nanoformulations were characterized using UV-Visible spectroscopy. GNPs (control/without ceftriaxone showed absorption λmax at 520 nm, while CGNPs showed maximum absorption at 536 nm ( Figure 2 ). The red shift of absorption from 520 to 536 nm can be correlated with the changes in size that might have occurred due to attachment of ceftriaxone to the CGNPs [40, 41] . In a 2017 study, Shaikh et al. [26] also observed the same red shift after the attachment of cefotaxime antibiotic to the GNPs. However, they conjugated the antibiotic on preformed GNPs instead of synthesizing them by the one-pot synthesis method that has been developed during the present study. During CGNP spectrophotometric analysis, an additional peak at 241 nm was also detected that corresponds to ceftriaxone attached to CGNPs [27] . Similarly, other studies have also shown two peaks when antibiotics Typical 'Surface Plasma Resonance' band patterns for synthesized gold nanoformulations were characterized using UV-Visible spectroscopy. GNPs (control/without ceftriaxone showed absorption λmax at 520 nm, while CGNPs showed maximum absorption at 536 nm ( Figure 2 ). The red shift of absorption from 520 to 536 nm can be correlated with the changes in size that might have occurred due to attachment of ceftriaxone to the CGNPs [40, 41] . In a 2017 study, Shaikh et al. [26] also observed the same red shift after the attachment of cefotaxime antibiotic to the GNPs. However, they conjugated the antibiotic on preformed GNPs instead of synthesizing them by the one-pot synthesis method that has been developed during the present study. During CGNP spectrophotometric analysis, an additional peak at 241 nm was also detected that corresponds to ceftriaxone attached to CGNPs [27] . Similarly, other studies have also shown two peaks when antibiotics (secnidazole-320 nm and cefotaxime-298 nm) were conjugated to GNPs along with characteristic peaks of 525 [42] and 542 nm [26] . In fact, it has been observed that the capping agent has a major influence on the electrocatalytic activity of GNPs [43] . (secnidazole-320 nm and cefotaxime-298 nm) were conjugated to GNPs along with characteristic peaks of 525 [42] and 542 nm [26] . In fact, it has been observed that the capping agent has a major influence on the electrocatalytic activity of GNPs [43] . Figure 3) . The size by DLS is based on the details of inner inorganic core of nanoparticles along with the solvent layer that has adhered to the nanoparticles once they are disseminated in the liquid medium. Thus, relying only on DLS is not enough to know the actual size of inorganic core. Zeta potential of GNPs and CGNPs was found to be −16.6 and −25.7 mV, respectively, which is an indicator of good stability of both the nanoparticles [44] . Usually, larger zeta potential either −ve or +ve implicates much more stable dispersion, that means nanoparticles will not get aggregated due to repulsion between each other [45, 46] . However, emulsion and colloid stability are not always predicted by zeta-potential, as only repulsive electrostatic forces are measured, and the forces of attraction such as Van der Waals forces are not considered [47] . Thus, the stability was also checked by keeping the colloidal CGNPs at room temperature for months and no aggregation was found even after 5 months. Scanning Electron Microscopy (SEM) results showed that both GNPs and CGNPs were spherical in shape and monodispersed (Figure 4 ). Ceftriaxone attachment/capping has not caused any changes in the shape of GNPs. In accordance, several other reports have also suggested the similar spherical pattern of GNPs after antibiotic conjugation [26, 42] . Scanning Electron Microscopy (SEM) results showed that both GNPs and CGNPs were spherical in shape and monodispersed (Figure 4 ). Ceftriaxone attachment/capping has not caused any changes in the shape of GNPs. In accordance, several other reports have also suggested the similar spherical pattern of GNPs after antibiotic conjugation [26, 42] . Transmission Electron Microscopy (TEM) has been performed for GNPs and CGNPs to estimate the size of the inorganic core. Using the TEM analysis by Gatan Digital Micrograph ( Figure 5 ), the size of the GNPs and CGNPs were confirmed to be 10.2 ± 1 and 21 ± 1 nm, respectively. The optical properties of GNPs were accredited to the 5 d (valence) and 6 sp (conduction) electrons. Well-defined monodispersed nanoparticles of equal size were revealed by the TEM micrograph. Estimating size by TEM and DLS covers two different aspects. DLS provide size distribution and polydispersity index results based on the quantification of several million particles present in the colloidal form, while TEM results are considered more biased in terms of selective imaging, where only a few hundred particles could be quantified at one time. Thus, correlating both the approaches has become an important strategy worldwide. Scanning Electron Microscopy (SEM) results showed that both GNPs and CGNPs were spherical in shape and monodispersed (Figure 4 ). Ceftriaxone attachment/capping has not caused any changes in the shape of GNPs. In accordance, several other reports have also suggested the similar spherical pattern of GNPs after antibiotic conjugation [26, 42] . Transmission Electron Microscopy (TEM) has been performed for GNPs and CGNPs to estimate the size of the inorganic core. Using the TEM analysis by Gatan Digital Micrograph ( Figure 5 ), the size of the GNPs and CGNPs were confirmed to be 10.2 ± 1 and 21 ± 1 nm, respectively. The optical properties of GNPs were accredited to the 5 d (valence) Confirmation of the interactions between the surface of gold nanoparticles and ceftriaxone was done by FTIR spectroscopy (Figure 6a Confirmation of the interactions between the surface of gold nanoparticles and ceftriaxone was done by FTIR spectroscopy (Figure 6a Prior to antibacterial assessment, loading efficiency of ceftriaxone on GNPs was calculated by UV-Visible spectrophotometric and HPLC method. Here, 199.8 µg of ceftriaxone (by UV-Visible spectrophotometry) and 199.5 µg of ceftriaxone (by HPLC) was found to be loaded to the GNPs, out of 250 µg of the ceftriaxone initially used for the synthesis. Thus, the loading efficiency percentage was estimated as 79.92% and 79.80%, respectively, for the methods used. Furthermore, the retention time for pure ceftriaxone and capped ceftriaxone is estimated as 3.512 min (Figure 7a ) and 3.59 min (Figure 7b ), respectively. The observable slight change in retention time was might be due to variation of pH in the mobile phase to the medium of the drug. The retention time for CGNPs is 2.61 min ( Figure 7b) . Similarly, in a 2015 study, secnidazole was estimated by HPLC, and found to have 70% loading efficacy onto GNPs [42] . In another study, cefotaxime loading efficacy on GNPs was found as 77.59% when estimated by UV-Visible spectrophotometry [26] . It is a fact that higher loading efficiency correlates inversely with unwanted loss of antibiotic/drug and shows better therapeutic application [25] . Therefore, the methodology applied in the present study was effective in loading a good amount of ceftriaxone onto gold nanoparticles. However, 200 µg ceftriaxone was considered as the final loaded amount on GNPs as an approximation for further antibacterial assay to avoid difficulties in calculations. Prior to antibacterial assessment, loading efficiency of ceftriaxone on GNPs was calculated by UV-Visible spectrophotometric and HPLC method. Here, 199.8 µg of ceftriaxone (by UV-Visible spectrophotometry) and 199.5 µg of ceftriaxone (by HPLC) was found to be loaded to the GNPs, out of 250 µg of the ceftriaxone initially used for the synthesis. Thus, the loading efficiency percentage was estimated as 79.92% and 79.80%, respectively, for the methods used. Furthermore, the retention time for pure ceftriaxone and capped ceftriaxone is estimated as 3.512 min (Figure 7a ) and 3.59 min (Figure 7b ), respectively. The observable slight change in retention time was might be due to variation of pH in the mobile phase to the medium of the drug. The retention time for CGNPs is 2.61 min (Figure 7b) . Similarly, in a 2015 study, secnidazole was estimated by HPLC, and found to have 70% loading efficacy onto GNPs [42] . In another study, cefotaxime loading efficacy on GNPs was found as 77.59% when estimated by UV-Visible spectrophotometry [26] . It is a fact that higher loading efficiency correlates inversely with unwanted loss of antibiotic/drug and shows better therapeutic application [25] . Therefore, the methodology applied in the present study was effective in loading a good amount of ceftriaxone onto gold nanoparticles. However, 200 µg ceftriaxone was considered as the final loaded amount on GNPs as an approximation for further antibacterial assay to avoid difficulties in calculations. The antibacterial activities of GNPs (Control), CGNPs and ceftriaxone were evaluated by testing them against three gGram-negative strains, i.e., Escherichia coli, Salmonella abony and Klebsiella pneumoniae and one Gram-positive Staphylococcus aureus. These tested strains were chosen to represent different bacterial types of machinery nurturing several potent virulent factors other than their observable pathogenicity and their prevalence in day-to-day life. The promising detection revealed that CGNPs and ceftriaxone could inhibit the growth of bacteria after diffusion into the agar ( Figure S2 ). Also, it was observed that both CGNPs and pure ceftriaxone had similar zones of inhibition. However, the total concentration of ceftriaxone in 50 µL CGNPs was equivalent to only 10 µg/well, whereas, the concentration of pure ceftriaxone was 50 µg/well. Thus, our primary findings confirmed that effectiveness of CGNPs was higher than pure ceftriaxone. The MIC50 of CGNPs and pure ceftriaxone against all the tested bacterial strains was recorded (Figure 8 ). The MIC50 values for GNPs and pure ceftriaxone were 1.39 and 3.1 µg/mL against E. coli (Figure 8a ), 1.60 and 2.9 µg/mL against S. aureus (Figure 8b ), 1.1 and 2.07 µg/mL against S. abony (Figure 8c ), 0.9 and 2.4 µg/mL against K. pneumoniae (Figure 8d ), respectively. The antibacterial activities of GNPs (Control), CGNPs and ceftriaxone were evaluated by testing them against three gGram-negative strains, i.e., Escherichia coli, Salmonella abony and Klebsiella pneumoniae and one Gram-positive Staphylococcus aureus. These tested strains were chosen to represent different bacterial types of machinery nurturing several potent virulent factors other than their observable pathogenicity and their prevalence in dayto-day life. The promising detection revealed that CGNPs and ceftriaxone could inhibit the growth of bacteria after diffusion into the agar ( Figure S2 ). Also, it was observed that both CGNPs and pure ceftriaxone had similar zones of inhibition. However, the total concentration of ceftriaxone in 50 µL CGNPs was equivalent to only 10 µg/well, whereas, the concentration of pure ceftriaxone was 50 µg/well. Thus, our primary findings confirmed that effectiveness of CGNPs was higher than pure ceftriaxone. The MIC 50 of CGNPs and pure ceftriaxone against all the tested bacterial strains was recorded (Figure 8 ). The MIC 50 values for GNPs and pure ceftriaxone were 1.39 and 3.1 µg/mL against E. coli (Figure 8a ), 1.60 and 2.9 µg/mL against S. aureus (Figure 8b ), 1.1 and 2.07 µg/mL against S. abony (Figure 8c ), 0.9 and 2.4 µg/mL against K. pneumoniae (Figure 8d ), respectively. Based on the antibacterial results, it can be suggested that ceftriaxone attachment to gold nanoparticles has enhanced its potency twice than the pure ceftriaxone. GNPs without ceftriaxone were used as a control and they did not show any activity against any tested strain. Similar results were observed when Shaikh et al. [26] and Brown et al. [48] tested naked GNPs while studying the cefotaxime-and ampicillin-conjugated GNPs against resistant bacterial strains, respectively. Thus, it can be inferred that the activity was due to ceftriaxone, and GNPs just aided in augmenting the potency. Due to biocompatibility, non-cytotoxicity and exceptional physiochemical properties, gold nanoformulations have always been the first choice among inorganic nanoparticles for drug delivery [22, 23] . Importantly, it was observed that the reactive portion of antibiotic (ciprofloxacin) was surface exposed when it was attached to GNPs and activity is retained [49] . Our results were in harmony with the findings of Shaikh et al. [26] and Brown et al. [48] , where cefotaxime and ampicillin also retained their potency after conjugation to GNPs. Pharmaceutics 2021, 13, x FOR PEER REVIEW 11 of 15 Based on the antibacterial results, it can be suggested that ceftriaxone attachment to gold nanoparticles has enhanced its potency twice than the pure ceftriaxone. GNPs without ceftriaxone were used as a control and they did not show any activity against any tested strain. Similar results were observed when Shaikh et al. [26] and Brown et al. [48] tested naked GNPs while studying the cefotaxime-and ampicillin-conjugated GNPs against resistant bacterial strains, respectively. Thus, it can be inferred that the activity was due to ceftriaxone, and GNPs just aided in augmenting the potency. Due to biocompatibility, non-cytotoxicity and exceptional physiochemical properties, gold nanoformulations have always been the first choice among inorganic nanoparticles for drug delivery [22, 23] . Importantly, it was observed that the reactive portion of antibiotic (ciprofloxacin) was surface exposed when it was attached to GNPs and activity is retained [49] . Our results were in harmony with the findings of Shaikh et al. [26] and Brown et al. [48] , where cefotaxime and ampicillin also retained their potency after conjugation to GNPs. The hypothesis on the mechanistic aspect of CGNP antibacterial action is based on the earlier reports of Rai et al. [21] and Shaikh et al. [26] . Firstly, the effective delivered ceftriaxone concentration was increased due to its attachment to GNPs. It might be due to the typical properties of GNPs, i.e., high surface-to-volume ratio, high concentration of (ceftriaxone) molecules loaded onto it due to large surface area, increased permeability towards the biological membrane and higher uptake by the bacterial cell [50] . Secondly, GNPs might have increased the porosity of the targeted bacterial strains and ceftriaxone molecules have gained easy access to the bacterial cell for their action. In fact, increased delivered concentration of antibiotic could saturate the resistant enzymes such as betalactamses, and plausibly inhibit the growth of the beta-lactamase-containing resistant bacterial strains as well [26] . However, when we discuss human cellular uptake of the nanoparticles (within the nanometers size range), pinocytosis is considered as a major uptake mechanism [51] . In fact, pinocytosis is a continual process occurring in all the cells that The hypothesis on the mechanistic aspect of CGNP antibacterial action is based on the earlier reports of Rai et al. [21] and Shaikh et al. [26] . Firstly, the effective delivered ceftriaxone concentration was increased due to its attachment to GNPs. It might be due to the typical properties of GNPs, i.e., high surface-to-volume ratio, high concentration of (ceftriaxone) molecules loaded onto it due to large surface area, increased permeability towards the biological membrane and higher uptake by the bacterial cell [50] . Secondly, GNPs might have increased the porosity of the targeted bacterial strains and ceftriaxone molecules have gained easy access to the bacterial cell for their action. In fact, increased delivered concentration of antibiotic could saturate the resistant enzymes such as betalactamses, and plausibly inhibit the growth of the beta-lactamase-containing resistant bacterial strains as well [26] . However, when we discuss human cellular uptake of the nanoparticles (within the nanometers size range), pinocytosis is considered as a major uptake mechanism [51] . In fact, pinocytosis is a continual process occurring in all the cells that could be subdivided as clathrin-mediated endocytosis, micropinocytosis, clathrinand caveolae-independent endocytosis, and caveolae-mediated endocytosis [52, 53] . It has been observed that if the size is below 100 nm, the pinocytosis uptake mechanism is preferred, whereas, if the size is large (250 nm), phagocytosis occurs [54, 55] . In our study, the size of both GNPs and CGNPs (as observed by TEM) are appropriate for pinocytosis. Although, further studies are needed to pinpoint the exact pinocytosis mechanism followed by CGNPs for the cellar uptake. The most persistent global public health issue after COVID-19 is antimicrobial resistance due to the resultant restriction in therapeutic options against infections, and misuse/self-medication of antibiotics in the COVID-19 era [2] . Recently, novel strategies have been designed to enhance the properties (distribution, penetration, specificity, and pharmacokinetics) of antimicrobial drugs. The formulation of antimicrobial nanoparticles or antimicrobial-conjugated nanoparticles is one such strategy. Impressive increases in drug specificity and enhanced pharmacokinetics were observed when GNPs are utilized for antimicrobial delivery. In this study, a similar approach has been used to enhance the potency of ceftriaxone. Ceftriaxone resistance was globally accepted before the arrival of COVID-19, but it is speculated to increase with time as suggested by several reports. Thus, the solutions are warranted urgently. In our study, it has been found GNPs can markedly enhance the potency of ceftriaxone. Moreover, its fate in the human body and toxicity aspects still needed to be deciphered. Currently, our team is working on exploring the exact mechanism of action, toxicity and lethal dose of CGNPs using in-vivo and in-vitro experimental designs. On the basis of preliminary findings on toxicity (data not shown), we found no toxicity on normal cell lines. Our team hopes that we can come up with fresh nanoformulations to tackle bacterial resistance issues in the near future. The present study delivered an approach to synthesize gold nanoparticles by applying ceftriaxone as reducing as well as stabilizing agent. In addition, synthesized ceftriaxoneloaded gold nanoparticles (CGNPs) acted as an effective tool to deliver ceftriaxone to the tested bacterial strains and markedly enhanced the ceftriaxone potency. Comparative analysis of pure ceftriaxone and CGNPs revealed that ceftriaxone after loading onto GNPs could become two times more potent. This strategy has opened a path to synthesize and deliver different antibiotics through GNPs in a one-step process to resolve the issue of increasing resistance. However, in-vivo studies to evaluate the fate and toxicity of CGNPs are warranted before jumping into the conclusive statement on the applicability of synthesized nanoformulations. Moreover, the preliminary findings of the present study could be used as a base to develop applicable nanoformulations. Antimicrobial Resistance Threats in the emerging COVID-19 pandemic: Where do we stand? The use of antibiotics in COVID-19 management: A rapid review of national treatment guidelines in 10 African countries Synthesis and optimization of ceftriaxone-loaded solid lipid nanocarriers Individual and community predictors of urinary ceftriaxone-resistant Escherichia coli isolates Resistance to ceftriaxone and other beta-lactams in bacteria isolated in the community. The Vigil'Roc Study Group Challenges associated with ceftriaxone resistance in Salmonella. Front Smartening' anticancer therapeutic nanosystems using biomolecules Preparation, characterization and evaluation of a biopolymeric gold nanocomposite with antimicrobial activity Does the antibacterial activity of silver nanoparticles depend on the shape of the nanoparticle? A study of the gram-negative bacterium Escherichia coli Plasmonic photothermal therapy (PPTT) using gold nanoparticles Bactericidal Activity of Photocatalytic TiO 2 Reaction: Toward an Understanding of Its Killing Mechanism Nanoparticles: Alternatives against Drug-Resistant Pathogenic Microbes The bactericidal effect of silver nanoparticles Silver nanoparticles as potential antibacterial agents Thiol Gold Nanoparticle Conjugates: Enhanced Potency and Selective Delivery for Breast Cancer Treatment Bioconjugated Plasmonic Nanoparticles for Enhanced Skin Penetration Antibacterial Effect of Chitosan-Gold Nanoparticles and Computational Modeling of the Interaction between Chitosan and a Lipid Bilayer Model Highly stable, protein capped gold nanoparticles as effective drug delivery vehicles for amino-glycosidic antibiotics Green synthesis of silk sericin-capped silver nanoparticles and their potent anti-bacterial activity Antibiotic mediated synthesis of gold nanoparticles with potent antimicrobial activity and their application in antimicrobial coatings Zebrafish as a correlative and predictive model for assessing biomaterial nanotoxicity Gold nanostructures: A class of multifunctional materials for biomedical applications A novel process for size controlled biosynthesis of gold nanoparticles using bromelain Lipid nanoparticles for topical and transdermal application for alopecia treatment:Development, physicochemical characterization, and in vitro release and penetration studies Synthesis and Characterization of Cefotaxime Conjugated Gold Nanoparticles and Their Use to Target Drug-Resistant CTX-M-Producing Bacterial Pathogens Development and Validation of UV Spectrophotometric Method for the Estimation of Ceftriaxone Sodium in Nanoparticles Development and Validation of Stability Indicating Spectroscopic Method for Content Analysis of HPLC method development and validation for the assay of ceftriaxone sodium injection An antibiotic assay by the well agar method A sensitive and quick micro plate method to determine the minimal inhibitory concentration of plant extracts for bacteria SERS coded gold nanorods as a multifunctional platform for densely multiplexed near infrared imaging and photothermal heating Enhanced antibiotic activity of ampicillin conjugated to gold nanoparticles on PEGylated rosette nanotubes Gold Nanoparticles Conjugated Antibiotics: Stability and Functional Evaluation Antibiotic delivery using gold nanoparticles Using gold nanoparticles in spectrophotometry State of the art in gold nanoparticle synthesis Review of the methodologies used in the synthesis gold nanoparticles by chemical reduction A Novel Approach for the synthesis of gold nanoparticles using Trypsin Synthesis and properties of water-soluble gold colloids covalently derivatized with neutral polymer monolayers Gold nanoparticles bearing functional anti cancer drug and anti-angiogenic agent: A "2 in 1" system with potential application in cancer therapeutics Improved efficiency and stability of secnidazole-An ideal delivery system Tailoring the ORR and HER electrocatalytic performances of gold nanoparticles through metal-ligand interfaces Partial PEGylation of superparamagnetic iron oxide nanoparticles thinly coated with amine-silane as a source of ultrastable tunable nanosystems for biomedical applications Progress in nanoparticles characterization: Sizing and zeta potential measurement Effect of nanoparticle concentration on zeta-potential measurement results and reproducibility Silk Cocoon-Derived Protein Bioinspired Gold Nanoparticles as a Formidable Anticancer Agent Nanoparticles functionalized with ampicillin destroy multiple-antibiotic-resistant isolates of Pseudomonas aeruginosa and Enterobacter aerogenes and methicillin-resistant Staphylococcus aureus Ciprofloxacin-protected gold nanoparticles Gold nanoparticles as a drug delivery system for standard chemotherapeutics: A new lead for targeted pharmacological cancer treatments Cellular uptake, intracellular trafficking, and cytotoxicity of nanomaterials Resolving Endosome Rotation in Intracellular Trafficking Insight into Cellular Uptake and Intracellular Trafficking of Nanoparticles Nanocarriers' entry into the cell: Relevance to drug delivery The effect of nanoparticle uptake on cellular behavior: Disrupting or enabling functions? The authors declare no conflict of interest.