key: cord-1036426-90qxz6os
authors: Shabbir, Muhammad Waqas; Leuenberger, Michael N.
title: Plasmonically enhanced mid-IR light source based on tunable spectrally and directionally selective thermal emission from nanopatterned graphene
date: 2020-10-16
journal: Sci Rep
DOI: 10.1038/s41598-020-73582-3
sha: 8e793026055723ac3424dc7f783a0b865056bc40
doc_id: 1036426
cord_uid: 90qxz6os

We present a proof of concept for a spectrally selective thermal mid-IR source based on nanopatterned graphene (NPG) with a typical mobility of CVD-grown graphene (up to 3000 [Formula: see text] ), ensuring scalability to large areas. For that, we solve the electrostatic problem of a conducting hyperboloid with an elliptical wormhole in the presence of an in-plane electric field. The localized surface plasmons (LSPs) on the NPG sheet, partially hybridized with graphene phonons and surface phonons of the neighboring materials, allow for the control and tuning of the thermal emission spectrum in the wavelength regime from [Formula: see text] to 12 [Formula: see text] m by adjusting the size of and distance between the circular holes in a hexagonal or square lattice structure. Most importantly, the LSPs along with an optical cavity increase the emittance of graphene from about 2.3% for pristine graphene to 80% for NPG, thereby outperforming state-of-the-art pristine graphene light sources operating in the near-infrared by at least a factor of 100. According to our COMSOL calculations, a maximum emission power per area of [Formula: see text] W/[Formula: see text] at [Formula: see text] K for a bias voltage of [Formula: see text] V is achieved by controlling the temperature of the hot electrons through the Joule heating. By generalizing Planck’s theory to any grey body and deriving the completely general nonlocal fluctuation-dissipation theorem with nonlocal response of surface plasmons in the random phase approximation, we show that the coherence length of the graphene plasmons and the thermally emitted photons can be as large as 13 [Formula: see text] m and 150 [Formula: see text] m, respectively, providing the opportunity to create phased arrays made of nanoantennas represented by the holes in NPG. The spatial phase variation of the coherence allows for beamsteering of the thermal emission in the range between [Formula: see text] and [Formula: see text] by tuning the Fermi energy between [Formula: see text] eV and [Formula: see text] eV through the gate voltage. Our analysis of the nonlocal hydrodynamic response leads to the conjecture that the diffusion length and viscosity in graphene are frequency-dependent. Using finite-difference time domain calculations, coupled mode theory, and RPA, we develop the model of a mid-IR light source based on NPG, which will pave the way to graphene-based optical mid-IR communication, mid-IR color displays, mid-IR spectroscopy, and virus detection.

www.nature.com/scientificreports/ The total energy density u can then be obtained by integrating over all frequencies and angles over the half-sphere, leading to the Stefan-Boltzmann law for the energy density of black-body radiation, with a BB = 7.566 × 10 −16 Jm −3 K −4 . The total power emitted per unit surface area P/A of a black-body is where b BB = 5.67 × 10 −8 Wm −2 K −4 is the Stefan-Boltzmann constant. The factor cos θ is due to the fact that black bodies are Lambertian radiators.

In recent years, several methods have been implemented for achieving a spectrally selective emittance, in particular narrowband emittance, which increases the coherence of the emitted photons. One possibility is to use a material that exhibits optical resonances due to the band structure or due to confinement of the charge carriers 1 . Another method is to use structural optical resonances to enhance and/or suppress the emittance. Recently, photonic crystal structures have been used to implement passive pass band filters that reflect the thermal emission at wavelengths that match the photonic bandgap 2,3 . Alternatively, a truncated photonic crystal can be used to enhance the emittance at resonant frequencies 4, 5 .

Recent experiments have shown that it is possible to generate infrared (IR) emission by means of Joule heating created by means of a bias voltage applied to graphene on a SiO 2 /Si substrate 6, 7 . In order to avoid the breakdown of the graphene sheet at around T = 700 K, the graphene sheet can be encapsulated between hexagonal boron nitride (h-BN) layers, which remove efficiently the heat from graphene. The top layer protects it from oxidation 8,9 . In this way, the graphene sheet can be heated up to T = 1600 K 9 , or even above T = 2000 K 8, 10 Here, we present the proof of concept of a method to tune the spectrally selective thermal emission from nanopatterned graphene (NPG) by means of a gate voltage that varies the resonance wavelength of localized surface plasmons (LSPs) around the circular holes that are arranged in a hexagonal or square lattice pattern in a single graphene sheet in the wavelength regime between 3 and 12 µ m. By generalizing Planck's radiation theory to grey-body emission, we show that the thermal emission spectrum can be tuned in or out of the two main atmospheric transparency windows of 3 to 5 µ m and 8 to 12 µ m in the mid-IR regime, and also in or out of the opaque mid-IR regime between 5 and 8 µ m. In addition, the gate voltage can be used to tune the direction of the thermal emission due to the coherence between the localized surface plasmons (LSPs) around the holes due to the nonlocal response function in graphene, which we show by means of a nonlocal fluctuation-dissipation theorem. The main element of the nanostructure is a circular hole of diameter a in a graphene sheet. Therefore let us focus first on the optoelectronic properties of a single hole.

The frequency-dependent dipole moment of the hole is where the polarizabilities α 1,2 are given along the main axes x and y of the elliptic hole, and r = r 0 is the position of the dipole moment, i.e. the hole. Graphene's dielectric function is isotropic in the xy-plane, i.e. ε ′′ || = ε ′′ xx = ε ′′ yy . V 0 is the volume of the graphene sheet. In the Supplementary Information we derive the general polarizabilities of an uncharged single-sheet hyperboloid with dielectric function ε(ω) inside a medium with dielectric constant ε m [see Eq. (163)]. The polarizabilities of an elliptical wormhole in x-and y-direction read (1) I BB (ω)dω = 1 4π cu(ω) = ω 2 4π 3 c 2 �(ω)dω.

(2) u BB = 8π 5 k 4 B 15c 3 h 3 T 4 = a BB T 4 ,

p(r, ω) = − ε 0 ε || (r, ω)E 0|| = − α 1,2 (r, ω)E 0|| , www.nature.com/scientificreports/ respectively, for which the in-plane polarizabilities lie in the plane of the graphene sheet that is parallel to the xyplane. a and b are the length and the width of the elliptical wormhole, as shown in Fig. 11 in the Supplementary Information. ε || (ω) is the dielectric function of graphene. We assumed that the thickness d of the graphene sheet is much smaller than the size of the elliptic hole. The geometrical factors in this limit are

In the case of a circular hole of diameter a the polarizability simplifies to

The localized surface plasmon resonance (LSP) frequency of the hole can be determined from the equation the condition for which the denominator of α || vanishes.

Using the linear dispersion relation, the intraband optical conductivity is 11, 12 which in the case of ε F ≫ k B T is reduced to where τ is determined by impurity scattering and electron-phonon interaction τ −1 = τ −1 imp + τ −1 e−ph . Using the mobility µ of the NPG sheet, it can be presented in the form τ −1 = ev 2 F /(µE F ) , where v F = 10 6 m/s is the Fermi velocity in graphene. ω p = e 2 E F /2ε m is the bulk graphene plasma frequency.

It is well-known by now that hydrodynamic effects play an important role in graphene because the Coulomb interaction collision rate is dominant, i.e. τ −1 ee ≫ τ −1 imp and τ −1 ee ≫ τ −1 e−ph , which corresponds to the hydrodynamic regime. τ −1 imp and τ −1 e−ph are the electron-impurity and electron-phonon collision rates, respectively. Since for large absorbance and emittance, we choose a large Fermi energy, we are in the Fermi liquid regime of the graphene sheet. Taking the hydrodynamic correction into account, we also consider the hydrodynamically adjusted intraband optical conductivity 13,14 , where

is the intraband pressure velocity, D ≈ 0.4 µ m is the diffusion length in graphene, and γ = τ −1 is the relaxation rate. Interestingly, the optical conductivity becomes k-dependent and nonlocal. Also, below we will conjecture that the diffusion length D must be frequency-dependent. The effect of the hydrodynamic correction on the LSP resonances at around = 4 µ m, 7 µ m, and 10 µ m is shown in Fig. 3a -c, respectively.

Note that since ε = 1 + χ , where χ is the susceptibility, it is possible to replace ε ′′ = χ ′′ . Alternatively, using the formula of the polarizability α = ε 0 χ we can write ε ′′ = α ′′ /ε 0 . The dielectric function for graphene is given by 11, 12 where ǫ g = 2.5 is the dielectric constant of graphite and d is the thickness of graphene. Inserting this formula into Eq. (10) gives Solving for the frequency and using the real part we obtain the LSP frequency, 

Let us now consider the 2D array of circular holes in a graphene sheet. Since the dipole moments p j = δp(R j , ω) interact with each other by inducing dipole moments, we need to consider the dressed dipole moment at each site R j as source of the electric field, which is where G jj ′ is the dipole-dipole interaction tensor. Using Bloch's theorem p j = p 0 exp(ik || · R || ) , the effective dipole moment becomes for each site j, and thus

The lattice some over the dipole-dipole interaction tensor G =

where P is the lattice period, 0 is the unit-cell area, and the real part is valid for periods much smaller than the wavelength. The factor g = 5.52 ( g = 4.52 ) for hexagonal (square) lattice. The electric field created by the effective dipole moment is determined by from which we obtain the effective polarizability of a hole in the coupled dipole approximation (CDA), This formula is the same as in Refs. 15, 16 , where the absorption of electromagnetic waves by arrays of dipole moments and graphene disks was considered. Thus, our result corroborates Kirchhoff 's law (see below). Consequently, we obtain the same reflection and transmission amplitudes as in Ref. 15 

where the upper (lower) sign and S = 2πω/c� 0 cos θ ( S = 2πω cos θ/c� 0 ) apply to s (p) polarization. Thus, the emittance and absorbance of the bare NPG sheet are given by 15, 17, 18 The coupling to the interface of the substrate with reflection and transmission amplitudes r 0 and t 0 , respectively, which is located basically at the same position as the NPG sheet, yields the combined reflection and transmission amplitudes 15 where r ′ = r and t ′ = 1 − r are the reflection and transmission amplitudes in backwards direction, respectively. The results for the LSP resonances at around = 4 µ m, 7 µ m, and 10 µ m are shown in Fig. 3a -c, respectively.

If we include also the whole substrate including cavity and Au mirror, we need to sum over all possible optical paths in the Fabry-Perot cavity, yielding (16) 

(20) ReG ≈g/P 3 ,

arccos θ for s polarization, cos θ for p polarization. , www.nature.com/scientificreports/ with where r Au is the complex reflection amplitude of the Au mirror in the IR regime. δ = 2kL cos θ is the phase accumulated by one back-and-forth scattering inside the Fabry-Perot cavity of length L. k ≈ n SU−8 k 0 is the wavenumber inside the cavity for an external EM wave with wavenumber k 0 = 2π/ . Since the sum is taken over a geometric series, we obtain

Since the transmission coefficient through the Au mirror can be neglected, we obtain the emittance ǫ and absorbance A including cavity, i.e.

The results for the LSP resonances at around = 4 µ m, 7 µ m, and 10 µ m are shown in Fig. 3a -c, respectively.

Using these results, let us consider the excitation of the graphene sheet near the hole by means of thermal fluctuations, which give rise to a fluctuating EM field of a localized surface plasmon (LSP). This can be best understood by means of the fluctuation-dissipation theorem, which provides a relation between the rate of energy dissipation in a non-equilibrium system and the quantum and thermal fluctuations occuring spontaneously at different times in an equilibrium system 19 . The standard (local) fluctuation-dissipation theorem for fluctuating currents δĴ ν (r, ω) in three dimensions reads where the relative permittivity ε(r, ω) = ε ′ (r, ω) + iε ′′ (r, ω) = f (r)ε(ω) and µ, ν = x, y, z are the coordinates. Note that since ε = 1 + χ , where χ is the susceptibility, it is possible to replace ε ′′ = χ ′′ . Alternatively, using the formula of the polarizability α = ε 0 χ we can write ε ′′ = α ′′ /ε 0 . f (r) = 1 on the graphene sheet and 0 otherwise. Since the fluctuating currents are contained inside the two-dimensional graphene sheet, we write the local fluctuation-dissipation theorem in its two-dimensional form, i.e.

where the fluctuating current densities have units of A/m 2 and the coordinates are in-plane of the graphene sheet. Using the method of dyadic Green's functions, it is possible to express the fluctuating electric field generated by the fluctuating current density by where is the surface of the graphene sheet. The LSP excitation around a hole can be well approximated by a dipole field such that where R j = (x j , y j ) are the positions of the holes in the graphene sheet.

Consequently, we have

The dyadic Green function is defined as with the scalar Green function given by (28) www.nature.com/scientificreports/ and k(ω) 2 

Then, the fluctuation-dissipation theorem can be recast into the form and thus we obtain noting that the dielectric tensor ε ′′ (r, ω) is diagonal. Since the energy density of the emitted electric field at the point r is we can write the spectral radiance as assuming that the dipole current of the LSP is in the plane of the graphene sheet, i.e. the xy-plane, and the polarizability is isotropic, ie. σ ′ 2D || = σ ′ 2D xx = σ ′ 2D yy , and the same for all holes. N is the number of holes. In order to obtain the spectral radiance in the far field, we need to integrate over the spherical angle. Using the results from the Supplementary Information, we obtain where we used the definition of the absorbance of a 2D material, i.e. with 2D complex conductivity σ 2D (ω) . According to Kirchhoff 's law, emittance ǫ(ω) , absorbance A(ω) , reflectance R(ω) , and transmittance T(ω) are related by 20 from which we obtain the grey-body thermal emission formula whose prefactor bears strong similarity to Planck's black body formula in Eq. (1). www.nature.com/scientificreports/ Using FDTD to calculate the emittance ǫ 2D || (ω) , we evaluted the grey-body thermal emission according to Eq. (46) for the thermal emitter structure based on NPG shown in Figs. 1 and 2. Using COMSOL, we calculated the temperature distribution inside the NPG sheet, as shown in Fig. 5 , when a bias voltage V SD is applied, which gives rise to Joule heating. The geometry of the simulated device is shown in Figs. 1 and 2. The area of the graphene channel is 10 µ m × 10 µ m. The thickness of the graphene sheet is 0.5 nm. The size of the gold contacts is 5 µ m × 10 µ m, with a thickness of 50 nm. Our results are shown in Fig. 4a -c for the temperatures 1300 K, 1700 K, and 2000 K of NPG. After integrating over the wavelength under the curves, we obtain the following thermal emission power per area: Let us consider the dependence of the thermal emission of NPG on the angle θ . Integrating over r 2 ϕ we obtain which is a clear deviation from a Lambert radiator. The pattern of the thermal radiation can be determined by www.nature.com/scientificreports/ which is shown in Fig. 6 . Interestingly, since we assumed that thermal emission is completely incoherent [see Eq. (42)] the thermal emission from NPG is only weakly dependent on the emission angle θ , which can be clearly seen in Fig. 6 .

However, the assumption that thermal emission of radiation is incoherent is not always true. Since Kirchhoff 's law is valid, thermal sources can be coherent 21 . After theoretical calculations predicted that long-range coherence may exist for thermal emission in the case of resonant surface waves, either plasmonic or phononic in nature 22, 23 , experiments showed that a periodic microstructure in the polar material SiC exhibits coherence over many wavelengths and radiates in well-defined and controlled directions 24 . Here we show that the coherence length of a graphene sheet patterned with circular holes can be as large as 150 µ m due to the plasmonic wave in the graphene sheet, thereby paving the way for the creation of phased arrays made of nanoantennas represented by the holes in NPG. The coherence of thermal emission can be best understood by means of a nonlocal response function 25 . First, we choose the nonlocal hydrodynamic response function in Eq. (13) . Using the 2D version of the fluctuationdissipation theorem in Eq. (33), we obtain the nonlocal fluctuation-dissipation theorem in the hydrodynamic approximation, 

. This result suggests that the coherence length is given approximately by D, which according to Ref. 13 would be D ≈ 0.4 µ m. However, the resulting broadening of the LSP resonance peaks would be very large and therefore in complete contradiction to the experimental measurements of the LSP resonance peaks in Refs. 11, 26, 27 . Thus, we conclude that the hydrodynamic diffusion length must be frequency-dependent with D(ν = 0) = 0.4 µ m. Using the Fermi velocity of v F = 10 6 m/s and a frequency of ν = 30 THz, the average oscillation distance is about L = v F ν −1 = 0.033 µ m, which is much smaller than D(ν = 0) in graphene. Thus we can approximate D(ν = 30 THz) = 0 . We conjecture that there is a crossover for D into the hydrdynamic regime when the frequency is reduced below around ν 0 = 1 to 3 THz, below which the hydrodynamic effect leads to a strong broadening of the LSP peaks for NPG. Consequently, the viscosity of graphene should also be frequency-dependent and a crossover for the viscosity should happen at about the same frequency ν 0 . We plan to elaborate this conjecture in future work. Future experiments could corroborate our conjecture by measuring the absorbance or emittance as a function of wavelength for varying scale of patterning of the graphene sheet.

Next, let us consider the coherence of thermal emission by means of the nonlocal optical conductivity in the RPA approximation. Using the general formula with in the low-temperature and low-frequency approximation, one obtains Eq. (12) . Now, let us use the full polarization in RPA approximation including only the Coulomb interaction, from which we obtain where the coherence length in RPA approximation is and the coherence wavenumber is given by For simplicity, we switch now to a square lattice of holes. In the case of the LSP resonance for a square lattice of holes at = 10 µ m, corresponding to ν = 30 THz, E F = 1.0 eV, ω = 2πν , and γ = ev 2 F /(µE F ) = 0.3 THz for µ = 3000 cm 2 V −1 s −1 , which results in a coherence length of C RPA = 3 µ m. This result is in reasonable agreement with the full width at half maximum (FWHM) values of the widths of the LSP resonance peaks in Refs. 11, 26, 27 . This coherence length would allow to preserve coherence for a linear array of period P = 300 nm and C RPA /P = 10 holes. In order to show the coherence length that can be achieved with graphene, we can consider a suspended graphene sheet with a mobility of µ = 150,00 cm 2 V −1 s −1 . Then the coherence length increases to a value of C RPA = 13 µ m, which would allow for coherence over a linear array with C RPA /P = 43 holes.

In the case of the LSP resonance for a square lattice of holes at = 5 µ m, corresponding to ν = 60 THz, E F = 1.0 eV, ω = 2πν , and γ = ev 2 F /(µE F ) = 0.3 THz for µ = 3000 cm 2 V −1 s −1 , which results in a coherence length of C RPA = 1.5 µ m. Considering again a suspended graphene sheet, the coherence length can be increased to C RPA = 6.7 µ m. Since the period in this case is P = 45 nm, the coherence for µ = 3000 cm 2 V −1 s −1 and µ = 150,00 cm 2 V −1 s −1 can be preserved for a linear array of C RPA /P = 33 and 148 holes, respectively.

The coherence length and time of thermally emitted photons is larger because the photons travel mostly in vacuum. Taking advantage of the Wiener-Kinchine theorem 21 , we can extract the coherence length C FDTD and coherence time τ FDTD of thermally emitted photons by means of the full-width half-maximum (FWHM) of the spectral radiances shown in Fig. 4a-c. Our results are shown in Fig. 7 . The coherence length of the thermally emitted photons can reach up to C FDTD = 150 µ m at a resonance wavelength of = 4 µ m. This means that the coherence length of the thermally emitted photons is about 37 times larger than the wavelength.

Thus, the latter large coherence length allows for the coherent control of a 150x150 square array of holes with period P = 45 nm, individually acting as nanoantennas, that can be used to create a phased array of nanoantennas. One of the intriguing properties of a phased array is that it allows to control the directivity of the emission of photons, which is currently being implemented for large 5G antennas in the 3 to 30 GHz range. The beamsteering capability of our NPG sheet is shown in Fig. 8 . In contrast, our proposed phased array based on NPG can operate in the 10 to 100 THz range.

(54) www.nature.com/scientificreports/ The temporal control of the individual phases of the holes requires an extraordinary fast switching time of around 1 ps, which is not feasible with current electronics. However, the nonlocal response function reveals a spatial phase shift determined by the coherence wavenumber K RPA , which is independent of the mobility of graphene. In the case of the LSP resonance at = 4 µ m, we obtain RPA = 2π/K RPA = 6 µ m, resulting in a minimum phase shift of 2πP/ RPA = 0.042 = 2.4 • between neighboring holes, which can be increased to a phase shift of 9.7 • by decreasing the Fermi energy to E F = 0.25 eV. Thus, the phase shift between neighboring holes can be tuned arbitrarily between 2.4 • and 9.7 • by varying the Fermi energy between E F = 1.0 eV and E F = 0.25 eV. Fig. 8 shows the capability of beamsteering for our proposed structure by means of directional thermal emission, which is tunable by means of the gate voltage applied to the NPG sheet.

Due to the full control of directivity with angle of emission between θ = 12 • and θ = 80 • by tuning the Fermi energy in the range between E F = 1.0 eV and E F = 0.25 eV, thereby achieving beamsteering by means of the gate voltage, our proposed mid-IR light source based on NPG can be used not only in a vertical setup for surface emission, but also in a horizontal setup for edge emission, which is essential for nanophotonics applications.

In conclusion, we have demonstrated in our theoretical study that NPG can be used to develop a plasmonically enhanced mid-IR light source with spectrally tunable selective thermal emission. Most importantly, the LSPs along with an optical cavity increase substantially the emittance of graphene from about 2% for pristine graphene to 80% for NPG, thereby outperforming state-of-the-art graphene light sources working in the visible and NIR by at least a factor of 100. Combining our proposed mid-IR light source based on patterned graphene with our demonstrated mid-IR detector based on NPG 27 , we are going to develop a mid-IR spectroscopy and detection platform based on patterned graphene that will be able to detect a variety of molecules that have mid-IR vibrational resonances, such as CO, CO 2 , NO, NO 2 , CH 4 , TNT, H 2 O 2 , acetone, TATP, Sarin, VX, etc. In particular, a recent study showed that it is possible to detect the hepatitis B and C viruses label-free at a wavelength of around 6 µm 28 . Therefore, we will make great effort to demonstrate that our platform will be able to detect with high sensitivity and selectivity the COVID-19 virus and other viruses that pose a threat to humanity.

Spectrally selective thermal emission. Kirchhoff 's law of thermal radiation states that emittance ǫ is equal to absorbance A, i.e.

In the case of a black body ǫ(ω, θ, φ, T) = A(ω, θ, φ, T) = 1 . Pristine graphene has a very small absorbance of only A = 0.023 and is a nearly transparent body. Shiue et al. used a photonic crystal structure to filter the thermal emission from pristine graphene with an emittance of around A = 0.07 10 . Their spectral radiance is shown in Fig. 9 and exhibits peaks at around = 1.55 µ m at a temperature of T = 2000 K. After integrating the spectral radiance under the curve, one obtains a emission power per area of about P/A = 100 W/m 2 , which is about 100 times weaker than our proposed thermal radiation source based on NPG at T = 2000 K. Our proposed thermal mid-IR source features an emission power per area of about P/A = 10 4 W/m 2 at T = 2000 K. In addition, our proposed thermal mid-IR source features frequency-tunability and beamsteering by means of a gate voltage applied to the NPG sheet.

Using FDTD to calculate the emittance ǫ 2D || (ω) , we evaluted the grey-body thermal emission according to Eq. (46) for the thermal emitter structure based on NPG shown in Figs. 1 and 2. Our results for the temperature (57) ǫ(ω, θ , φ, T) = A(ω, θ , φ, T). www.nature.com/scientificreports/ For the transformation from cartesian to ellipsoidal coordinates, one can use the following system of equations: www.nature.com/scientificreports/ whose elements J ij define the Jacobian matrix. The derivatives are explicitly:

The coordinate η is constant on the surfaces of oblate spheroids defined by The surface associated with the limit η → 0 is an infinitesimally thin circular disk of radius R. In contrast, the surface in the limit η ≫ 1 is a sphere of radius r = R cosh η ≈ R sinh η . Thus, the Laplace equation in ellipsoidal coordinates reads Charged conducting ellipsoid. The surface of the conducting ellipsoid is defined by ξ = 0 . Thus, the electric field potential �(ξ ) is a function of ξ only, thereby defining the equipotential surfaces by confocal ellipsoids.

The solution outside the ellipsoid is

. www.nature.com/scientificreports/ From the asymptotic approximation ξ ≈ r 2 for large distances r → ∞ , i.e. ξ → ∞ , we identify R ξ ≈ ξ 3/2 and thus using the boundary condition lim ξ →∞ �(ξ ) = 0 . Since the Coulomb field should be � where the function we used in the case of the charged ellipsoid (see above). Thus, the field inside the ellipsoid is given by

(91) � in (0, η, ζ ) = � 0 (0, η, ζ ) + � p (0, η, ζ ). If the external electric field is applied along the other major axes of the ellipsoid, x or y, the polarizabilities are respectively, where 

(112)

(118) � in (0, η, ζ ) = � 0 (0, η, ζ ) + � p (0, η, ζ ). Dipole moment of conducting single-sheet hyperboloid with a small elliptical wormhole induced by an external electric field. Let us consider a conducting single-sheet hyperboloid with a small elliptical wormhole, as shown in Fig. 11 . Contrary to the case of an uncharged ellipsoid, where the solutions when applying the external electric field in x, y, or z direction are similar, the solutions in the case of an uncharged hyperboloid depend strongly on the axis in which the external field E 0 points. While the solutions for E 0 = E 0x and E 0 = E 0ŷ are similar, the solution for E 0 = E 0ẑ is completely different. The reason for this fundamental difference is that the ellipsoid resembles a sphere from far away. However, a single-sheet hyperboloid has elliptical cylindrical symmetry.

Here, let us first calculate the electrostatic potential �(ξ , η, ζ ) of a conducting single-sheet hyperboloid with an elliptical hole, which can be represented by a limiting hyperboloid from a family of hyperboloids described by the implicit equation for a > b > c . The cubic roots ξ , η , and ζ are all real in the ranges for a > b > c = 0 . The cubic roots ξ , η , and ζ are all real in the ranges

The surface of the conducting hyperboloid is defined by −b 2 ≤ η = η 1 < 0.

Let us consider the case E 0 = E 0x , which in the limit when the hyperboloid becomes a flat plane is the most relevant one. Therefore in the lower-half plane, where the negative sign corresponds to positive x values and the positive sign to negative x values. Since the equipotential surfaces are determined by η , let p be the potential caused by the hyperboloid, with the boundary condition � in (η = 0) = 0 . Requiring continuous boundary condition on the surface of the hyperboloid, we have where in the second equation the normal component of D at η = η 1 must be continuous. Then we make the ansatz for the electrostatic potential inside the hyperboloid, where C in is a constant. This ansatz satisfies the boundary condition � in (ξ = 0, η → 0, ζ ) = 0 . For the outside polarization field we choose where C p is a constant, and we defined www.nature.com/scientificreports/ Note that lim ξ →0 + arctan a √ ξ = π/2 , whereas lim ξ →0 − arctan a √ ξ = −π/2 . Therefore, in order to avoid discontinuity at ξ = 0 , we must have arctan

where R η = (η + a 2 )(η + b 2 )(−η) . The boundary conditions at z → ±∞ are satisfied:

At large distances r = x 2 + y 2 + z 2 from the wormhole we have ξ ≈ r 2 . Then the far-field potential in the upper half-space, which is given by the pure polarization field, is

The polarization far-field has the form of a dipole field at large distances r from the wormhole.

In order to determine the polarizability of the wormhole, let us find the solution at ξ = 0 , corresponding to the plane that passes through the center of the wormhole. For ξ = 0 , the unit vectors x and η are parallel. In this near-field limit, the polarization potential has the form where C p = C p (π/2 − 1).

Using the boundary conditions shown in Eq. (139), we obtain the first equation and the second equation

Using the derivatives we can rewrite the second equation as which is equivalent to Thus, the potentials are

x r 3 .

(146) � p (ξ , η, ζ ) = −C p E 0 xK 1 (η),

ε mCp K 1 (η 1 ) ∂x ∂η η 1 + K ′ 1 (η 1 ) x| η 1 − ε in C in ∂x ∂η η 1 = ε m ∂x ∂η η 1 .

(149) ∂x ∂η ξ =0,η 1 = a 2 (ζ + a 2 ) (η 1 + a 2 )(a 2 − b 2 )(a 2 − c 2 ) , www.nature.com/scientificreports/ Then the far-field potential in the upper half-space, which is given by the pure polarization field, is

where we assumed that a ≈ b . The polarization far-field has the form of a dipole field at large distances r from the wormhole. If the external electric field is applied in y-direction, we obtain the potentials Similarly, we obtain the polarizability in y-direction, i.e.

Comparing to the polarizabilities of ellipsoids 32 , the polarizabilities of hyperboloids are proportional to ab √ −η 1 , which corresponds to the volume of the ellipsoid abc.

In the case of circular wormholes, we have a = b , and therefore α 1 = α 2 = α || , with L 1 = L 2 = L || . www.nature.com/scientificreports/ Figure 12a shows the loss function for graphene with carrier mobility µ = 3000 cm 2 /V · s and a Fermi energy of E F = 1.0 eV. In order to take advantage of the enhancement of the electromagnetic field at the position of the graphene sheet, the thickness of the optical cavity must be /4n , where n is the refractive index of the cavity material 11 . The LSP resonance frequencies ω LSP4 , ω LSP7 , and ω LSP10 mark the frequencies around the resonance wavelengths of 4 µ m, 7 µ m. and 10 µ m. The resonance frequencies of the polar phonons are denoted by ω BN for h-BN and by ω SN for Si 3 N 4 .

Scientific Reports | (2020) 10:17540 | https://doi.org/10.1038/s41598-020-73582-3 www.nature.com/scientificreports/ Doping of graphene due to Si 3 N 4 . The Silicon nitride, Si 3 N 4 , dielectric layer causes an effective n-type doping in graphene sheet 34, 35 . The shift in Fermi energy is given by

where v F is the Fermi velocity ( v F ≈ 10 6 m/s for graphene), is Planck's constant, and n is the carrier density. The carrier density n depends on the gate voltage and capacitance, i.e.

where �V = (V G − V CNP ) is the gate voltage relative to charge neutrality point, e is electric charge, and C is the capacitance of dielelectric layer, given by C = ε r ε 0 d , ε r is the relative permittivity, ε 0 is the permittivity of free space, and d is the thickness of dielectric layer.

The gate capacitance for a 50 nm thick Si 3 N 4 layer in the infrared region is V G = 4.5 × 10 −8 F/cm 2 . From Eq. (176) we conclude that the Fermi energy E F = 1 eV corresponds to a gate voltage relative to the CNP of �V = (V G − V CNP ) = 6.9 V.

Wang et al. 34 observed that a Si 3 N 4 film with a thickness of 50 nm shifts the CNP in a graphene sheet to -20 V, which shows that graphene is n-doped at zero gate voltage and the Fermi energy is E F = 1.74 eV. The Fermi energy can be tuned by applying a gate voltage to a desired value. In our work, we have used a Fermi energy of E F = 1 eV, which corresponds to V = 6.59 V, i.e. for the CNP at − 20 V, V G = −13.41 V results in a Fermi energy of E F = 1 eV. From Eqs. (176) and (177), the carrier density required to achieve a Fermi energy of E F = 1 eV is n = 1.94 × 10 12 cm −2 , which corresponds to an electric field of E 1.0eV = en ε r ε 0 = 1.38 × 10 6 Vcm −1 , which is in the safe zone compared to the reported breakdown field of the order of 10 7 Vcm −1 36 .

(175) r 2 sin θdθdϕ|G xx (r; ω)| 2 = 2 15π , r 2 sin θdθdϕ G yx (r; ω) 2 = 4 15π , r 2 sin θdθdϕ|G zx (r; ω)| 2 = 4 15π , r 2 sin θdθdϕ G xy (r; ω) 2 = 4 15π , r 2 sin θdθdϕ G yy (r; ω) 2 = 2 15π , r 2 sin θdθdϕ G zy (r; ω) 2 = 4 15π .

(176)

Nanophotonic engineering of far-field thermal emitters

Modification of planck blackbody radiation by photonic band-gap structures

Enhancement and suppression of thermal emission by a three-dimensional photonic crystal

Resonant-cavity enhanced thermal emission

Narrowband wavelength selective thermal emitters by confined tamm plasmon polaritons

Thermal infrared emission from biased graphene

Thermal emission from large area chemical vapor deposited graphene devices

Ultrafast graphene light emitters

Graphene thermal emitter with enhanced joule heating and localized light emission in air

Thermal radiation control from hot graphene electrons coupled to a photonic crystal nanocavity

Dynamically tunable extraordinary light absorption in monolayer graphene

nanoplasmonics in metallic nanostructures and dirac systems

Negative local resistance caused by viscous electron backflow in graphene

From Classical to Quantum Plasmonics in Three and Two Dimensions

Complete optical absorption in periodically patterned graphene

The extinction spectra of silver nanoparticle arrays: influence of array structure on plasmon resonance wavelength and width

Independently tunable dual-band perfect absorber based on graphene at mid-infrared frequencies

Structured graphene metamaterial selective absorbers for high efficiency and omnidirectional solar thermal energy conversion

Principles of Nano-Optics

Statistical Physics: Part 2

Revisiting thermal radiation in the near field

Near-field effects in spatial coherence of thermal sources

Spatial coherence of thermal near fields

Coherent emission of light by thermal sources

Electromagnetic field correlations near a surface with a nonlocal optical response

Wide angle dynamically tunable enhanced infrared absorption on largearea nanopatterned graphene

Dirac plasmon-assisted asymmetric hot carrier generation for room-temperature infrared detection

Spectroscopy goes viral: Diagnosis of hepatitis b and c virus infection from human sera using atr-ftir spectroscopy

Handbook of Mathematical Functions: with Formulas, Graphes, and Mathematical Tables

Spheroidal Wave Functions in Electromagnetic Theory

Electrodynamics of Continuous Media 2nd edn

Absorption and scattering of light by small particles

Damping pathways of mid-infrared plasmons in graphene nanostructures

Air-stable n-type doping of graphene from overlying si3n4 film

Dielectric surface charge engineering for electrostatic doping of graphene

Silicon nitride gate dielectrics and band gap engineering in graphene layers

We acknowledge support from NSF CISE-1514089. We thank Gernot Pomrenke, Alireza Safaei, and Sayan Chandra for useful discussions.

Dispersion relations. In our proposed mid-IR light source the effective combination of silicon nitride ( Si 3 N 4 ) and hexagonal boron nitride (h-BN) behaves as an environment with polar phonons. Both materials are polar with ions of different valence, which leads to the Frohlich interaction between electrons and optical phonons 33 . Fig. 12 shows that the interaction between the electrons in graphene and the polar substrate/gra-The second term is due to the effective Coulomb interaction, and v c (q) = e 2 /2qε 0 is the 2D Coulomb interaction. The effective electron-electron interaction mediated by the substrate optical phonons, gives rise to the third term, where |M sph | 2 is the scattering and G 0 l is the free phonon Green function. The effective electron-electron interaction due to the optical phonons in graphene, gives rise to the last term of Eq. (165). |M o ph| 2 is the scattering matrix element, and G o (ω) is the free phonon Green function. χ 0 j,j (q, ω) is the current-current correlation function in Eq. (165). The relaxation time τ of the momentum consists of the electron-impurity, electron-phonon, and the electron-edge scattering,which determines the plasmon lifetime and the absorption spectrum bandwidth. It can be evaluated via the measured DC mobility µ of the graphene sample through τ DC = µ √ πρ/ev F , where v F = 10 6 m/s is the Fermi velocity, and the charge carrier density is given bywhere w is the edge-toedge distance between the holes, and w 0 = 7 nm is the adjustment parameter. The electron-phonon scattering time is τ e−ph = /2Im( e−ph ) . The imaginary part of the electron-phonon self-energy reads where γ = 18.3 × 10 −3 is the electron-phonon coupling coefficient. The optical phonon energy of graphene is given by ω oph ≈ 0.2 eV. The loss function Z describes the interaction of the SPPs and the substrate/graphene phonons. In RPA we have Integral of dyadic Green function elements over spherical angle. For the calculation of the spectral radiance we need to integrate the elements of the dyadic Green function over the spherical angle. We can split the total dyadic Green function into a free space term ← → G 0 (r, r ′ ; ω) and a term ← → G SPP (r, r ′ ; ω) that creates surface plasmon polaritons inside graphene. Since the absorbance of the pristine graphene sheet is only 2.3%, we can safely neglect ← → G SPP (r, r ′ ; ω) . Our goal is to calculate the gray-body emission of the EM radiation from the LSP around the holes in graphene into free space. Therefore, we need to evaluate where can use the approximation In Cartesian coordinates, we can write down the dyadic Green function as 19 Since we are interested only in the far field, we consider only the far-field component of the dyadic Green function, which is which possesses only angular (transverse) components but no radial (longitudinal) components. Then the necessary components are (172) 

The authors declare no competing interests.

Correspondence and requests for materials should be addressed to M.N.L.Reprints and permissions information is available at www.nature.com/reprints.Publisher's note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creat iveco mmons .org/licen ses/by/4.0/.