key: cord-1033195-mfm96d2q
authors: Guo, Hao; Zheng, Chong; Gaillard, Elizabeth R.
title: Computational studies for the structure and function of mRPE65
date: 2007-03-21
journal: J Theor Biol
DOI: 10.1016/j.jtbi.2006.10.002
sha: 934e3600434c7e74a2f4cd1cc664c4a8fed5b75d
doc_id: 1033195
cord_uid: mfm96d2q

The mRPE65 protein is one form of the RPE65 protein and plays a very important role in the visual cycle. However, its 3D structure and detailed mechanism of function are still unclear because of difficulties with isolation and crystallization. This computational study reports a model for the mRPE65 protein structure derived from a model for sRPE65. The natural substrate for RPE65 has been shown to be a retinyl ester and, by utilizing the Autodock and the Ligplot programs, the interactions between the ester and the protein as well as the effects of several mutations on these interactions are studied. Finally, the position of the binding site is proposed based on an iterative process and the effects of the mutations on the binding site are also discussed.

The RPE65 protein is located in retinal pigment epithelial cells (Bavik et al., 1992; Gollapalli et al., 2003; Jahng et al., 2003; Ma et al., 2001; Mata et al., 2004; Redmond et al., 1998; Tsilou et al., 1997; West et al., 2003; Wolf, 2005; Xue et al., 2004; Znoiko et al., 2002) and plays a very important role in the visual cycle (Rando, 2001) . Its dysfunction can lead to various diseases, such as autosomal recessive retinitis pigmentosa (Hamei et al., 2001; Yzer et al., 2003) and Lebers congenital amaurosis (Gouras et al., 2002; Hamei et al., 2001; Seeliger et al., 2001) . It exists in two forms: sRPE65 and mRPE65. The sRPE65 protein is the cytosolic form and has a very high binding affinity to all-trans retinol whereas mRPE65 is membrane associated and has a very high binding affinity to all-trans retinyl ester (Wolf, 2005) . They have the same amino acid sequence but different post-translation modifications; sRPE65 undergoes no post-translation modification in contrast to mRPE65 which has three covalently attached palmitic acids at CYS231, CYS329 and CYS330 (Xue et al., 2004) . The function of mRPE65 in the visual cycle has not been unambiguously determined. Until recently it was believed that mRPE65 can extract the ester from the membrane and deliver it to an isomerahydrolase (IMH) but by itself has no catalytic ability (Gollapalli et al., 2003; Jahng et al., 2003; Mata et al., 2004; Redmond et al., 1998; Tsilou et al., 1997) . Dysfunction of mRPE65 will then cause the accumulation of all-trans retinyl ester and, concomitantly, a deficiency of 11-cis retinol. However recently, several studies suggest that mRPE65 not only binds with all-trans retinyl ester but can also isomerize and hydrolyse it to 11-cis retinol, indicating that mRPE65 is an IMH (Jin et al., 2005; Moiseyev et al., 2005; Redmond et al., 2005) . The sRPE65 protein is a chaperone for all-trans retinol when it is esterified to all-trans retinyl ester. The conversion between these two forms of the RPE65 protein can modulate the visual cycle (Wolf, 2005; Xue et al., 2004) . Experimental observations show that the LEU450-MET or TYR368HIS mutations in mRPE65 will cause dysfunction of this protein (Kim et al., 2004; Wenzel et al., 2001; Yzer et al., 2003) and are associated with diseases such as early onset retinal dystrophy.

In this paper, a computational model for mRPE65, including its binding site, is constructed and studied. The interactions with all-trans retinyl ester and the effects of several specific mutations on the binding site are also investigated through computational modeling methods. The mRPE65 protein model is developed on the basis of the sRPE65 model since the only structural differences between them are their different post-translation modifications. Three palmitic acids are added onto the sRPE65 model at CYS231, CYS329 and CYS330 residues by using the Autodock program and the VMD programs. By utilizing the Autodock (Goodsell and Olson, 1990; Morris et al., 1996 Morris et al., , 1998 and Ligplot programs (Wallace et al., 1995) , the binding site of mRPE65 for all-trans retinyl ester was found and the interactions between the ester and the protein as well as the effects of LEU450MET and TYR368HIS mutations on the binding site were studied.

The mRPE65 model is constructed by adding three palmitic acids onto the sRPE65 model obtained previously (Guo et al., 2006) . This was carried out using the Autodock program and the VMD program. The model allows for a qualitative discussion of the role of these three palmitic acids. Because the palmitic acids are covalently attached to the protein, the bond lengths and angles are fixed. Initially, in the model of sRPE65, the position for the carbonyl carbon atom of a palmitic acid was calculated according to known bond lengths and angles. Then, the Autodock program was used to add the palmitic acids to the sRPE65 protein model and to fix the specific carbon atom at the calculated position. The deviation for this process is about 0.01 Å due to finite grid size. Finally, the VMD program was used to adjust the position of the long carbon chains of the palmitic acids to reduce the energetically unfavorable contacts between the palmitic acids and the protein. After obtaining this model of the mRPE65 protein, the interactions between the all-trans retinyl ester and the protein were evaluated and the binding site of mRPE65 for the ester was also modeled. The Autodock program and the Ligplot program are used to study the interactions between the mRPE65 protein and the all-trans retinyl ester. The Autodock program can calculate the binding energy of a ligand when it binds with a protein (Goodsell and Olson, 1990; Morris et al., 1996 Morris et al., , 1998 . Recently this program is used to screen the drug candidates against severe acute respiratory syndrome, a disease that has spread mainly throughout eastern Asia (Wei et al., 2006) . Since the docking process in the Autodock program begins with a population of random ligand conformations in random orientations at random translations, it gives different docking results at different times even if all initial conditions are the same. Thus, in each docking study, the average value of twenty trials was used to represent the final docking energy results. Because the final docking energy results are a statistically averaged value, they are only used for a qualitative analysis. It is anticipated that the binding site of mRPE65 for the all-trans retinyl ester is in one of the three hydrophobic domains of mRPE65. Therefore, initially the Autodock program was used to study the docking energies of the all-trans retinyl ester in the three domains of mRPE65 by docking the all-trans retinyl ester near the center of each domain. Because the LEU450MET and TYR368HIS mutations can cause dysfunction of the protein (Kim et al., 2004; Wenzel et al., 2001; Yzer et al., 2003) , these two residues may be related to the binding of the ester. Therefore, the all-trans retinyl ester is also docked near these two residues and the effects of the LEU450MET and TYR368HIS mutations on the binding energy of the ester were examined by using the Autodock program. The mutated protein is obtained from the Jackal software package. To find out the binding site of mRPE65 for all-trans retinyl ester, an iterative method was used to approach the binding site. At first, the Ligplot program was used to analyse the docking results of alltrans retinyl ester near the center of domain two and LEU450 by generating the schematic diagrams for the protein-ester interactions. These diagrams indicate which residues in the mRPE65 protein model interact with the alltrans retinyl ester. After obtaining these diagrams, those common binding residues showing up in the diagrams more than eighteen times among the total twenty trials were selected and the ester was docked near the center of these residues to obtain the docking results for the first iteration. Then the Ligplot program was used again to analyse the docking results of the first iteration and select the binding residues, which appear in the binding site more than 18 times among the total 20 trials. Finally, the ester was docked near the center of these residues and the docking results for the second iteration were obtained. By using the same strategy, the docking results for the third iteration can be obtained. To study the effects of the LEU450MET and TYR368HIS mutations on the ester binding, the Autodock program is used to study the docking energies of the all-trans retinyl ester around the center of the binding site with these two mutations. The VMD program is also used to study the effects of these two mutations on the structure of the binding site.

The mRPE65 protein model is shown in Fig. 1 as drawn by the VMD program. In this model, the mRPE65 protein has three domains and each domain consists of a righthanded twisted anti-parallel b-barrel, which is consistent with other reports in the literature (Chou et al., 1990a-c; Chou and Carlacci, 1991) . The hydrophobic interiors of these b-barrels are likely places to bind with the hydrophobic all-trans retinyl ester. Three palmitic acids bind with CYS231, CYS329 and CYS330 and their long carbon chains are all extended to the exterior of the protein. These long carbon chains are highly hydrophobic and prefer to reside in a hydrophobic environment, so it is expected that they will be located in the hydrophobic interior of the membrane and act as an anchor to immobilize the mRPE65 protein on the surface of the membrane. The model is shown in Fig. 2 as drawn by the VMD program. The sRPE65 protein is treated as a rigid body when the palmitic acid residues are added onto it because the binding site is remote from these residues and their main role is to anchor mRPE65 onto the surface of the membrane. Thus, it is very likely that the local conformational changes around the three palmitic acids will have little effect on the binding site of the protein. This strategy is similar to other investigations of pharmaceutically important proteins (Chou et al., , 2000 Chou, 1993 Chou, , 1994 Chou, , 2004d . Interestingly, the sRPE65 protein does not bind with any palmitic acids therefore its hydrophilic surface cannot be immobilized on the surface of the membrane and this may explain why mRPE65 is membrane associated but sRPE65 is cytosolic. The membrane association of mRPE65 may also give it an opportunity to interact with the all-trans retinyl ester buried in the membrane and extract it from the interior of the membrane to the hydrophobic interior of the protein.

The three palmitic acids may also act to guide the all-trans retinyl ester into the protein. A similar mechanism for guiding a ligand into an active site and the channel of membrane protein is reported for the GABAA receptor (Chou, 2004a) and human potassium and sodium channels (Chou, 2004b) , respectively. This may explain the different binding affinities of mRPE65 and sRPE65 to all-trans retinyl ester. All-trans retinyl ester is highly hydrophobic and, therefore, it should be buried in a hydrophobic environment. In the model of the mRPE65 protein, the most favorable binding site for the hydrophobic all-trans retinyl ester is the hydrophobic interior of the b-barrel in each domain. Therefore, our model suggests that the binding site of the mRPE65 protein for all-trans retinyl ester should be located in the hydrophobic interior of the bbarrel in each domain. According to the docking energy results summarized in Table 1 , the binding site should be located in the b-barrel of domain two because the all-trans retinyl ester exhibits the lowest docking energy there. This conclusion is also supported by the observation that LEU450, whose mutation can cause dysfunction of mRPE65 (Kim et al., 2004; Wenzel et al., 2001) , is located at the b-barrel of this domain. LEU450 and TYR368 are very important to the binding of the all-trans retinyl ester because it has been observed experimentally that their mutations can cause dysfunction of mRPE65 (Kim et al., 2004; Wenzel et al., 2001; Yzer et al., 2003) . According to the docking energy results summarized in Table 2 , when the all-trans retinyl ester is docked near LEU450, its docking energy is lower than when it is docked near the center of domain two. The LEU450MET mutation also causes an increase in the docking energy when the all-trans retinyl ester is docked near residue 450. These results indicate that LEU450 is closer to the binding site than to the center of domain two and that LEU450 may be an intrinsic part of binding site. In contrast, when all-trans retinyl ester is docked near TYR368, its docking energy is higher than when it is docked near the center of domain two. The TYR368HIS mutation also causes a decrease of the docking energy when the all-trans retinyl ester is docked near residue 368. These results indicate that TYR368 is farther away from the binding site than the center of domain two and cannot be a part of the binding site. However the TYR368HIS mutation does increase the docking energy of all-trans retinyl ester when it is docked near LEU450 indicating this mutation can affect the binding site and the binding of all-trans retinyl ester. The binding site of mRPE65 for the all-trans retinyl ester was mapped by using the Autodock program and the Ligplot program. The docking energy results from this procedure are summarized in Table 3 . According to these results, the docking energy of the first iteration is substantially lower than those when the all-trans retinyl ester is docked near the center of domain two and LEU450 indicating this docking center is much closer to the binding site. The docking energy of the second iteration is also lower than the docking energy of the first iteration but it increases in the third iteration, therefore, the docking results of the second iteration were chosen as the binding site of mRPE65 for all-trans retinyl ester. The model of the binding site with the bound all-trans retinyl ester is shown in Fig. 3 Table 4 , both of these mutations cause the binding energy of all-trans retinyl ester to increase. These results may explain why these two mutations are observed to cause dysfunction of mRPE65. The van der Waals interactions are mainly responsible for favoring domain two as the domain containing the binding site for the all-trans retinyl ester. In other words, the size and shape of the binding site fit the ligand better than the center of domain two or the other domains. Hydrogen bonds also play an important role in the ligand binding as has been reported by others (Chou et al., 2000 (Chou et al., , 1999 (Chou et al., , 2003 (Chou et al., , 1997 Chou, 2004c Chou, , 2005 Chou, , 1992 . In our docking and Ligplot trials, THR457 in the binding site often forms hydrogen bonds with the binding ester to stabilize the complex. Furthermore, the mutations noted earlier also cause the internal energy of the all-trans retinyl ester to increase, implying that the ligand no longer fits well in the binding site of the mutants without added strain to its own structure.

This study constructs a model for mRPE65 based on the sRPE65 protein model with the addition of three palmitic acids. These three palmitic acids can act as anchors to immobilize the mRPE65 on the surface of the membrane and may play a role in guiding the ester into the interior of the protein. The mRPE65 model has three domains and each domain consists of a right-handed twisted antiparallel b-barrel. The binding site is most likely located in domain two and close to LEU450 based on the docking results. By using the Autodock program and the Ligplot program, the binding site of mRPE65 for all-trans retinyl ester was mapped and the effects of LEU450MET and TYR368HIS mutations on the binding of the ester were calculated. Fig. 4. (a) The model of mRPE65 with bound all-trans retinyl ester (as space-filling diagrams), (b) the model of mRPE65 with bound all-trans retinyl ester that has been rendered to show residue hydrophobicity. Highly hydrophobic residues are in green, neutral residues are in grey, acidic residues are in red, basic residues are in blue. 

Characterization of a plasma retinol-binding protein membrane receptor expressed in the retinal pigment epithelium

Energy-optimized structure of antifreeze protein and its binding mechanism

Conformational change during photocycle of bacteriorhodopsin and its proton pumping mechanism

Mini review: a molecular piston mechanism of pumping protons by bacteriorhodopsin

Modelling extracellular domains of GABA-A receptors: subtypes 1, 2, 3, and 5

Insights from modelling three-dimensional structures of the human potassium and sodium channels

Insights from modelling the 3D structure of the extracellular domain of alpha7 nicotinic acetylcholine receptor

Review: Structural bioinformatics and its impact to biomedical science

Coupling interaction between thromboxane A2 receptor and alpha-13 subunit of guanine nucleotide-binding protein

Energetic approach to the folding of alpha/beta barrels

Prediction of the tertiary structure and substrate binding site of caspase-8

Conformational and geometrical properties of idealized beta-barrels in proteins

Energetics of the structure and chain tilting of antiparallel beta-barrels in proteins

Review: energetics of interactions of regular structural elements in proteins

An energy-based approach to packing the 7-helix bundle of bacteriorhodopsin

A model of the complex between cyclin-dependent kinase 5(Cdk5) and the activation domain of neuronal Cdk5 activator

Prediction of the tertiary structure of a caspase-9/inhibitor complex

Binding mechanism of coronavirus main proteinase with ligands and its implication to drug design against SARS

RPE65 operates in the vertebrate visual cycle by stereospecifically binding all-trans-retinyl esters

Automated docking of substrates to proteins by simulated annealing

Retinal degeneration and RPE transplantation in RPE65 À / À mice

Structure prediction of the RPE65 protein

Retinal dystrophies caused by mutations in RPE65: assessment of visual functions

A cleavable affinity biotinylating agent reveals a retinoid binding role for RPE65

RPE65 is the retinoid isomerase in bovine retinal pigment epithelium

RPE65 Leu450Met variant is associated with reduced levels of the retinal pigment epithelium lipofuscin fluorophores A2E and iso-A2E

Expression, purification, and MALDI analysis of RPE65

RPE65 is a retinyl ester binding protein that presents insoluble substrate to the isomerase in retinal pigment epithelial cells

RPE65 is the isomerohydrolase in the retinoid visual cycle

Distributed automated docking of flexible ligands to proteins: parallel applications of AutoDock 2.4

Automated docking using a lamarckian genetic algorithm and empirical binding free energy function

The biochemistry of the visual cycle

RPE65 is necessary for production of 11-cis-vitamin A in the retinal visual cycle

Mutation of key residues of RPE65 abolishes its enzymatic role as isomerohydrolase in the visual cycle

New views on RPE65 deficiency: the rod system is the source of vision in a mouse model of Leber congenital amaurosis

RPE65, the major retinal pigment epithelium microsomal membrane protein, associates with phospholipid liposomes

LIGPLOT: a program to generate schematic diagrams of protein-ligand interactions

Anti-SARS drug screening by molecular docking

The RPE65 Leu450Met variation increases retinal resistance against lightinduced degeneration by slowing rhodopsin regeneration

Protein database, human retinal pigment epithelium

Function of the protein RPE65 in the visual cycle

A palmitoylation switch mechanism in the regulation of the visual cycle

A Tyr368His RPE65 founder mutation is associated with variable expression and progression of early onset retinal dystrophy in 10 families of a genetically isolated population

Identification of the RPE65 protein in the mammalian cone photoreceptors