key: cord-1031655-m6d0rtpn
authors: Holenya, Pavlo; Lange, Paul Joris; Reimer, Ulf; Woltersdorf, Wolfram; Panterodt, Thomas; Glas, Michael; Wasner, Mark; Eckey, Maren; Drosch, Michael; Hollidt, Jörg‐Michael; Naumann, Michael; Kern, Florian; Wenschuh, Holger; Lange, Robert; Schnatbaum, Karsten; Bier, Frank F.
title: Peptide microarray‐based analysis of antibody responses to SARS‐CoV‐2 identifies unique epitopes with potential for diagnostic test development
date: 2021-05-07
journal: Eur J Immunol
DOI: 10.1002/eji.202049101
sha: 30e9871b62ca7865a67ce791d72bd9b770841440
doc_id: 1031655
cord_uid: m6d0rtpn

Humoral immunity to the Severe Adult Respiratory Syndrome (SARS) Coronavirus (CoV)‐2 is not fully understood yet but is a crucial factor of immune protection. The possibility of antibody cross‐reactivity between SARS‐CoV‐2 and other human coronaviruses (HCoVs) would have important implications for immune protection but also for the development of specific diagnostic ELISA tests. Using peptide microarrays, n = 24 patient samples and n = 12 control samples were screened for antibodies against the entire SARS‐CoV‐2 proteome as well as the Spike (S), Nucleocapsid (N), VME1 (V), R1ab, and Protein 3a (AP3A) of the HCoV strains SARS, MERS, OC43, and 229E. While widespread cross‐reactivity was revealed across several immunodominant regions of S and N, IgG binding to several SARS‐CoV‐2‐derived peptides provided statistically significant discrimination between COVID‐19 patients and controls. Selected target peptides may serve as capture antigens for future, highly COVID‐19‐specific diagnostic antibody tests.

The COVID-19 pandemic hit the world unprepared. At the time of writing global cases were in the millions and still rising [1] . Apart from social distancing, rapid testing of suspected cases and contacts is the key measure helping to contain the infection. The experience from many countries has shown that imprecise or incomplete knowledge of infection prevalence and viral transmission rates may result in a wrong assessment of the epidemiological situation, wrong predictions, and inadequate guidance and action with potentially grave consequences for societies and national economies. These observations underline the global need for reliable and highly specific tests.

Severe Adult Respiratory Syndrome (SARS)-Coronavirus (CoV)-2 infection is generally confirmed by RT-PCR on swabs taken from the nose and throat, however, virus load quickly becomes unmeasurable following the acute infection. Reliable serological monitoring will therefore be instrumental in determining the SARS-CoV-2 infection status of larger populations, determine existing immunity, and track local outbreaks [2] . In the near future it may also greatly contribute to assess vaccine-induced immunity at the population level. However, SARS-CoV-2 antibody testing is much more complex than appears at first glance. Currently available antibody tests are not very specific and may produce conflicting results [3] [4] [5] . A plausible reason for that might be that antibody tests have generally been validated by samples from clinically symptomatic rather than mild or even asymptomatic cases. However, the reason for the overall unreliable performance of antibody tests is not fully understood. Interestingly, it has been suggested that, particularly in mild and asymptomatic cases, IgG responses may not be detectable until 3-4 weeks after infection (Fafi-Kremer et al., 6) which may compound the issue.

A large number of studies have examined antibody responses to SARS-CoV-2 [7] . Most of these used full-length proteins as capture antigens and, thus, have not identified reactivity at the single epitope level. Only few references ( [8] ; Farrera-Soler et al., 2020 [9] [10] [11] [12] ), including preprints [13] [14] [15] , provide more detailed information on antibody specificity. Most of these studies comprise small sample numbers (n ≤ 10) and only two of them [9, 16] examined cross-reactivity with other human coronaviruses (HCoVs) despite initial studies with full-length antigens [17] and in silico analysis indicating that significant cross-reactivity is to be expected [18, 19] .

Here, we present a first study of the humoral immune response against SARS-CoV-2 at the single linear peptide epitope level covering all SARS-CoV-2 antigens as well as the S, N, E, and M proteins of the pandemic-/epidemic-related human Severe Adult Respiratory Syndrome and Middle East Respiratory Syndrome-related human coronaviruses (SARS-CoV and MERS-CoV), and, in addition, the seasonal cold-related strains human coronavirus HCoV-OC43 and HCoV-229E. Our results provide deeper insight into the immune response to HCoVs than previously published work which could pave the way to SARS-CoV-2 specific and reliable COVID-19 diagnostic test development.

Serum samples from COVID-19 patients analyzed by peptide microarray technology exhibited high levels of antibody reactivity against peptides derived from SARS-CoV2. In contrast, almost no reactivity with only few scattered signals was detected in the control group. Several immunodominant regions were identified in color-coded heatmaps reflecting obtained signal intensities. These were located primarily in the SARS-CoV-2 S and N proteins (Fig. 1 , Supporting information Figs. S1-6). For four exemplarily chosen immunodominant regions (denoted A, B, C, and D, Fig. 1 ), the respective signal distributions were exemplified by box plots. These showed a clear discrimination between the SARS-CoV-2-infected and the control group, thus, supporting the visually observed immunodominance. Besides S and N, there was also strong IgG reactivity to several peptides derived from the SARS-CoV-2 M, AP3A, and R1AB proteins, however, immune dominance was less pronounced in these proteins (Supporting information Figs. S3, S5, and S6). All remaining SARS-CoV-2 antigens demonstrated no or only minor immunogenicity in terms of IgG response.

For quantitative characterization of the identified immunodominant regions, responses in SARS-CoV-2-infected individuals were compared to those in the control group for each single peptide. Table 1 shows a selection of identified epitopes represented either by single peptides or by common core sequences derived from two or more overlapping peptides. To narrow down the identified immunodominant peptides to the potential immunodominant epitope sequences, the peptides with the highest accuracy scores (calculated as the sum of true positive and true negative divided by the total number of observations) were listed in the order of their starting position in the corresponding antigens. When applicable, sequence overlaps derived from two or more recognized overlapping peptides were marked in red. A complete list of peptides showing the significant discrimination between the SARS-CoV-2-infected and the control group, as defined by an accuracy score of >0.4, can be found in Supporting information Table S2 . Figure 2 shows results for three selected peptides that statistically significantly discriminate between SARS-CoV-2-infected individuals and the control group by the nonparametric Wilcoxon Rank Sum test. Also, the best combinations of three, four, and five peptides are presented. Clearly, the combination of peptides further increases the potential to discriminate between the groups.

To evaluate the diagnostic potential of a peptide-based assay, a comparison with a commonly used diagnostic test utilizing a full-length viral antigen was performed. Figure 3 shows the quantitative results obtained for the SARS-CoV-2-infected group with (a) the commercial ELISA test (EUROIMMUN) and (b) the peptide microarray. The assays demonstrated a strong correlation with a Spearman's rank correlation coefficient of 0.88.

Antibody cross-reactivity between SARS-CoV-2 and seasonal common cold coronaviruses may be highly important with respect to the clinical course of COVID-19 and at the same time represents a challenge for the development of a specific test. We, therefore, analyzed IgG reactivity to peptides derived from the S, N, E, and M proteins of SARS-CoV, MERS-CoV, HCoV-OC43, and HCoV-229E (Supporting information Table S1) in both groups. This revealed highly similar IgG binding profiles against the N and M proteins of SARS-CoV-2 and SARS-CoV, whereas the corresponding proteins of the remaining viral strains showed only weak and scattered signals (Supporting information Figs. S1 and S3). Most notably, peptides derived from the S protein of all viral strains showed clear signal patterns among SARS-CoV-2-positive patient samples, suggesting that this antigen contained cross-reactive determinants (Supporting information Fig. 2 ). IgG reactivity was directed at two sequence regions in particular (Fig. 4) , both located in the S2 domain of the spike protein. Each of these regions was represented by overlapping peptides containing highly conserved cross-reactive epitopes (Fig. 4 , right panel). One consensus motif, R 0815 S-IED-LF 0823 (numbers referring to the location of the epitope in the SARS-CoV-2 antigen) was present in all five viruses, and a second consensus motif, F 1148 -ELD-FKN 1158 was found in the viruses SARS-CoV-2, SARS-CoV, MERS-CoV, and HCoV-OC43, but not HCoV-229E. Selected peptides providing statistically significant separation between the groups are listed. The first column contains the protein name which in combination with "_SARS2" forms the Uniprot ID (e.g. AP3A_SARS2). The numbers indicate the start and end positions of each peptide. Immunodominant epitopes (highlighted red) are derived from the sequences of (overlapping) peptides. Start and end positions are also indicated preceding and following the epitope sequences in the "immunodominant epitope" column. The right column (#) provides a numeration of the epitopes that is used within the manuscript and also indicates the S protein subunit (S1 or S2) in which the respective peptide is found.

To further analyze serologic cross-reactivity of SARS-CoV-2positive patients against common cold coronaviruses, we performed a gapless alignment of the N and S sequences from all coronaviruses (Fig. 5 ). For each strain, this yielded the sequence regions that were complementary to the previously identified SARS-CoV-2 epitopes. Finally, for each of the amino acid residues of the thus identified sequences, the median signal of all overlapping peptides containing that residue was calculated and visualized by the same color coding as in the previously presented heatmaps (Fig. 5) . The immunodominant epitopes #6 and #7 of the N protein and #1 and #3 of the S protein of SARS-CoV-2 (see Table 1 for a list of the sequences) displayed strong signals with samples from SARS-CoV-2-infected individuals compared to the control samples. At the same time, no signals were found for the homologous sequences of the other coronavirus strains, indicating that IgG responses to these epitopes may be truly specific for SARS-CoV-2 (Fig. 5, top) . SARS-CoV-2 epitopes #1-#5 of the N and #2 and #6 of the S protein showed a strong homology to SARS-CoV which resulted in serologic cross-reactivity to this virus (Fig. 5, middle) . Finally, epitopes #4 and #5 of the S protein were the least SARS-CoV-2 specific and exhibited considerable crossreactivity between all sequence variants (Fig. 5, bottom ).

The work presented here used a systematic approach that provides deeper insight into the humoral immune response to HCoVs Selected single peptides and combination of peptides providing the best discrimination between sample groups. The same dataset as in Figure 1 was used for the statistical analysis. (A) For each peptide, the signal intensity was compared between the SARS-CoV-2-infected ("SARS2"; n = 24) and the control ("CTRL"; n = 12) group by Wilcoxon Rank Sum test with the box plots showing the ability of selected peptides to discriminate between groups. (B) Combinations of three, four, and five peptides providing the best discrimination between the groups by Wilcoxon Rank Sum test. Each data point represents the sum of the signals of the combined peptides. Thresholds were calculated using the FPR and TNR values from the ROC-Analysis by selecting the optimal value for balanced accuracy ((TPR + TNR)/2). The boxplots show the median of the corresponding sample groups. The central rectangles span the interquartile range (IQR). The whiskers represent the following values: upper whisker = min(max(x), Quartile 3 + 1.5 * IQR); lower whisker = max(min(x), Quartile 1 -1.5 * IQR). The points in the boxplots show the MMC2 values for the individual samples. Data are pooled from two experiments. and lays the foundation for the development of specific serological tests for SARS-CoV-2 infection. The approach is based on four pillars: (i) peptide microarray based analysis of the humoral immune response against the entire SARS-CoV-2 proteome and other HCoV proteomes, (ii) identification of all immunodominant epitopes at high resolution, (iii) selection of SARS-CoV-2 peptides that are recognized by serum antibodies of COVID-19 patients but not by serum antibodies from controls, and (iv) selection of SARS-CoV-2 peptides whose homologous peptides in other HCoVs are not recognized by serum antibodies from COVID-19 patients.

Our analysis of IgG responses of COVID-19 patients against all peptides of the SARS-CoV-2 proteome revealed that IgG binding was mainly focused on both the S and N proteins, indicating that these two proteins are indeed immunodominant (Fig. 1 , Supporting information Figs. S1-6). The fact that the M, AP3A, and R1ab proteins were also recognized, however, shows that responses are not exclusive to S and N. It remains to be resolved in future studies if the most dominant immune responses against certain antigens are also the most effective responses concerning disease protection. With respect to the location of linear epitopes within the S protein sequence, we made several interesting observations. First, linear epitopes were found in the cytoplasmic tail portion of the S protein, although such would not normally be accessible to antibody binding, as they are hidden away from the viral surface. However, following the destruction of SARS-CoV-2-infected cells or the destruction of SARS-CoV-2 virions otherwise, these portions of the sequence are likely to get exposed and may be recognized by B cells. Second, our analysis did not detect much binding of antibodies to potential linear epitopes in the RBD region of the S protein (Fig. 1) , which stands in contrast to the Figure 3 . Correlation between the commercial ELISA and the peptide microarray signals. The Spearman's correlation coefficient (R = 0.88; p value = 2.5 × 10 −6 ) between the ELISA signal and the summed microarray signals for SARS-CoV-2 S and N peptides was calculated for sera from SARS-CoV-2-infected patients (n = 22). In the ELISA assay, which used a recombinant S glycoprotein as capture antigen, the quotient of the extinction of the patient sample in comparison to the calibrator was used as net assay signal. The total microarray signals for each sample were calculated as a sum of all corresponding signal intensities above the upper 10 −16 % quantile of the noise distribution.

detection of antibody binding to the correctly folded domains reported by others [20] . Both observations appear to confirm that linear epitopes may occur largely independently of conformational epitopes [21] .

It should be noted that some signals of reactivity were also observed in a few of the control group samples, that is, in the N but also in the S protein (Fig. 1 ). While these reactivities have been included in all statistical analyses throughout the manuscript, due to the relatively small control group size we refrained from further elaborating on the proportion of possible cross-reactive samples in noninfected individuals.

Applying stringent bioinformatic criteria, we identified several linear epitopes that were immunodominant among SARS-CoV-2-positive patients ( Table 1 ). The majority of the epitopes were located within the N protein as well as the S1 and S2 domain of the S protein (Table 1 ). Previous analyses of antibody epitopes in SARS-CoV revealed that many such epitopes were indeed linear [22, 23] . Interestingly, some immunodominant regions in the N and S proteins that have been previously reported in the literature [8, 10] correspond closely to epitopes #3 from N and #1 and #4 from S (Table 1) , respectively. This confirms our findings and illustrates the potential of the peptide microarrays for epitope identification. Longer sequence stretches encompassing some of the epitopes identified here have also been described in published manuscripts ( [11] Farrera-Soler et al., 2020) [12] ) or in nonpeer-reviewed preprint publications, however, without narrowing them down [13] [14] [15] . With our comprehensive peptide library, we further completed the list of the previously described immunodominant SARS-CoV-2 regions and specified the corresponding epitopes.

The most important question with respect to developing a reliable diagnostic test was, however, whether the IgG response to the identified SARS-CoV-2-specific peptides can effectively distinguish COVID-19 patients and controls. This was indeed the case, as a comparison of serum reactivity in COVID-19 patients versus the control group, peptide by peptide, identified many peptides to which responses were significantly different between the groups ( Table 1 , Fig. 2A ). The combination of selected peptides derived from different SARS-CoV-2 antigens further improved the discrimination between the sample groups as shown in Fig. 2B , and also might increase sensitivity when applied in a diagnostic test.

As a further step to assess the diagnostic potential of the obtained data, the quantitative results obtained with the peptide microarrays were compared with those generated by a commercial ELISA test (Fig. 3) . We observed a very strong correlation between the ELISA signals and the summed microarray signals for the SARS-CoV-2 S and N peptides. This suggests that a combination of short linear synthetic peptides may be used for the development of a diagnostic test instead of full-length antigens. The strong correlation was not expected per se, as the ELISA test is based on the S1 domain of the S protein and not the complete antigen. As it was found that only a small proportion of all peptides forms B-cell epitopes, the selection of peptides for a diagnostic test must not necessarily span the whole antigen, but might be limited to immunodominant regions identified by a peptide microarray screening.

Multiple studies utilizing in silico prediction of SARS-CoV-2 immunogenicity ( [11] ; Yuan et al., 24) postulated the existence of cross-reactive immunity between different coronaviruses, in particular between SARS-CoV-2 and SARS-CoV, because several known B-cell and T-cell target peptides in SARS-CoV exist almost identically in SARS-CoV-2. Cross-reactive T-cell epitopes were experimentally confirmed by several authors ( [25] ; Mateus et al., 26) ; and some degree of B-cell crossreactivity to HCoVs has been identified by western blot or flow cytometry analysis using full-length antigens [17, 27] . However, there is still a shortage of experimental data identifying cross-reactive B-cell epitopes. We found two immunodominant regions in the S2 domain of the SARS-CoV-2 S protein (1148-FKEELDKYFKN-1158 and 0815-RSFIEDLLF-0823) which were highly cross-reactive with the prevalent seasonal "common cold" coronaviruses HCoV-OC43 and HCoV-229E (Fig. 4) . A similar result obtained with different assays based on 30mer peptide cDNA-fusion pools or 20-mer phage-display technology confirms our findings [9, 16] . Although a few of the control samples shown in Fig. 1 display some reactivity to SARS-CoV-2-derived peptides, given the small number of control sera tested it is not possible to draw any conclusions regarding the frequency of cross-reactive samples in SARS-CoV-2-negative individuals.

The identified cross-reactivity is of particular interest, as it suggests that exposure to common cold HCoVs may provide a degree of immunity to SARS-CoV-2. The presence of such pre-existing immunity may have a positive impact on the course and outcome of COVID-19. Arguments against this hypothesis are, however, that it has been reported that the common cold coronaviruses generate only a weak and transient humoral immune response [28] and that reconvalescents from SARS-CoV-a virus that is structurally more closely related to SARS-CoV-2 than the common cold coronaviruses-did not have SARS-CoV-2 neutralization titers in plasma [29] . Of note, pre-existing immunity could also be detrimental, as it may inhibit production of antibodies with certain specificity, that is, a phenomenon called "original antigenic sin." This phenomenon may be responsible for ineffective vaccine response to a recently developed Cytomegalovirus vaccine [21] . Even worse, existing antibodies could promote infection of target cells by facilitating viral uptake, a phenomenon called antibodydependent enhancement (Fierz et al., [30] ).

Our results demonstrate that some of the patient sera, for example, numbers SARS_20 to SARS_23, show stronger reactivity towards the HCoV-OC43 variant of the cross-reactive epitope II than to the respective SARS-CoV-2 epitope (Fig. 4) . This is an interesting observation as there is no other logical explanation for this than that the antibody was made in response to the HCoV-OC43 virus in a previous HCoV-OC43 infection. In other words, this is suggesting that these antibodies may be bonafide anti-HCoV-OC43 antibodies reboosted by exposure to SARS-CoV-2 infection. A number of additional peptides that led to strong IgG responses (Fig. 4 ) support the notion of pre-existing B-cell immunity to SARS-CoV-2 in those exposed to other coronaviruses. It will be up to future studies with larger cohorts to determine whether pre-existing immunity has an effect on disease severity.

While the physiological effects of serologic cross-reactivity require further studies, it is obvious that it makes the development of reliable antibody tests more difficult. Antibody-based ELISA tests that use full-length conformational antigens or parts thereof as capture antigens might give false positive results in individuals with previous exposure to common cold coronaviruses. In this regard, the usage of the S protein antigen in a diagnostic test might be problematic due to several highly homologous regions between SARS-CoV-2 and other coronaviruses. The detailed analysis of IgG reactivity against SARS-CoV, MERS-CoV, HCoV-OC43, and HCoV-229E S and N proteins indeed revealed widespread cross-reactivity in several immunodominant regions (Fig. 4) , which is most probably a consequence of sequence homology. However, the observed cross-reactivity could not be predicted by simple sequence alignment unless 100% homology was present. With a view to develop a diagnostic test, our finding that epitopes #6 and #7 of N and #1 and #3 of S appear to provide a high specificity for SARS-CoV-2 (Fig. 5) is of major interest. A combination of such epitopes in a peptide ELISA may increase sensitivity without increasing the risk of false positives.

Because the prevalence of mutated versions of SARS-CoV-2 became eminent during the revision of this manuscript [31] , we analyzed if the discovered specific peptides were located within mutated regions of the respective variants. In fact, none of the sequences in Figure 4 were located in regions where the currently most discussed emerging SARS-CoV-2 variants (B.1.1.7originating from the UK, B.1.351-originating from South Africa, P.1-originating from Brazil) are mutated (Fig. 1) . This implies that a diagnostic test based on the epitopes discovered in this study should also allow the detection of the three mutated viruses.

In conclusion, our study experimentally confirms antibody cross-reactivity between SARS-CoV-2 and other HCoVs, but at the same time reveals antibody reactivity to several epitopes that are unique to SARS-CoV-2. These epitopes are of particular interest for the development of diagnostic tests. Additional, larger studies are required to confirm these results and accelerate the development of a sensitive and specific test for SARS-CoV-2 infection that we urgently need in order to deal with the current and possible future waves of this pandemic.

Following written informed consent peripheral blood samples were obtained by vene puncture/from peripheral venous catheters. Multiple samples were collected into a Vacutainer Tube (Serum-separating tube) with a volume of 8 mL. Serum was collected after centrifugation, samples were allowed to clot for 1 h, and the clot was removed by centrifugation. The samples were divided and stored in aliquots at −80°C until use.

Samples were collected from the upper respiratory tract using a nasopharyngeal (NP) with plastic by trained medical staff. In the case of the NP, the swab was inserted deeply into the nostril until resistance was encountered and the depth was equal to the distance from the nose to the ears of the patients. The swab was gently rubbed against the nasopharynx and left there in order to absorb enough secret. Swabs were then immediately placed into a sterile transport tube. Samples were cooled and tested no more than 48 h after collection.

Controls: Controls consist of excess serum samples collected in accordance to the regulations for the use of rest samples for scientific purposes at the KH Labor. All samples have been collected from form patients hospitalized in April 2020. Sera in the control group tested negative for COVID-19 infection in the EUROIM-MUN IgG Elisa Test. We used samples from different specialties including cardiology, gastroenterology, nephrology, and the intensive care unit. SARS-CoV-2-infected group: COVID-19 patients (n = 13 females, age range 23 to 70 years; n = 11 male, age range 35 to 70 years) were recruited across the spectrum of clinical severity, ranging from asymptomatic/mild to severe/SARS. COVID-19 diagnosis was confirmed either by diagnostic PCR and/or commercial ELISA carried out 14 days or later after the onset of symptoms. Detailed information on all patients and samples is provided in Supporting information Table S3 .

Inclusion/exclusion criteria were: Fully conversant in the German or English language, able and willing to attend to the study requirements, written informed consent to participate in this study/history of four or more infections with antibiotic treatment in the year preceding the blood draw, severe liver or kidney disease, patients undergoing immunotherapy, and cancer patients.

A detailed medical history was obtained from all patients. To validate COVID-19 cases, RT-PCR, clinical diagnosis, and the result of the Euroimmune IgG Assay were used in conjunction. Patients were questioned about the time of onset of symptoms. All patients included in this study could precisely specify at which date symptoms occurred. After the onset of symptoms all but one patient underwent RT-PCR testing and tested positive for COVID-19. We ensured that no patient took any medicine or suffered from a disease that could potentially affect the development of antibodies. The severity of COVID-19 was determined based on WHO guidelines into asymptomatic, mild (common cold-like symptoms), moderate (dyspnea, clinical signs of pulmonary distress), and severe (requiring oxygen supplementation, intensive care with or without ventilation) [32].

Antibody response profiling was performed with a peptide microarray (JPT Peptide Technologies GmbH) containing 5513 peptides covering the full proteome of SARS-CoV-2 and, in addition, the S, N, E, and M proteins of the following HCoVs: SARS-CoV-1, MERS-CoV, HCoV-229E, HCoV-OC43. All proteins were represented by overlapping peptides covering the entire protein sequence (15 aa length, 11 aa overlap). All proteins covered by the peptide library are listed in Supporting information Table S1. Table 1 ) is represented by a heatmap showing aligned sequences of the investigated coronaviruses. Blue frames indicate the inferred epitope length. The colored background of each amino acid residue reflects the median signal intensity (IgG reactivity) of the SARS-CoV-2positive cohort calculated from signals of all peptides on the microarray which contained this residue. The color code ranges from white (0 or low intensity) over yellow (middle intensity) to red (maximal intensity of 65535 light units). Thus, red signals indicate strong binding of antibodies to the respective amino acid, while yellow signals indicate weak binding. Percent sequence homology to SARS-CoV-2 is indicated in green. Based on the observed cross-reactivity of the SARS-CoV-2-induced IgG responses toward the other virus types, certain combinations of SARS-CoV-2 epitopes may be used to develop diagnostic tests with different specificities.

Peptides were synthesized and immobilized on peptide microarray slides as described previously [33] . In brief, the peptides were synthesized using SPOT synthesis (Wenschuh et al., [34] ), cleaved from the solid support and chemoselectively immobilized on functionalized glass slides. Each peptide was deposited on the microarray in triplicates.

The peptide microarrays were incubated with sera (applied dilution 1:200) in an HS 4800 microarray processing station (Tecan) for 2 h at 30°C, followed by incubation with 0.1 μg/mL fluorescently labelled anti human IgG detection antibody (Jackson Immunoresearch, 109-605-098). Washing steps were performed prior to every incubation step with 0.1% Tween-20 in 1× TBS. After the final incubation step, the microarrays were washed (0.05% Tween-20 in 0.1× SSC) and dried in a stream of nitrogen. Each microarray was scanned using a GenePix Autoloader 4300 SL50 (Molecular Devices, Pixel size: 10 μm). Signal intensities were evaluated using GenePix Pro 7.0 analysis software (Molecular Devices). For each peptide, the MMC2 value of the three triplicates was calculated. The MMC2 value was equal to the mean value of all three instances on the microarray except when the coefficient of variation (CV)-standard deviation divided by the mean value -was larger than 0.5. In this case, the mean of the two values closest to each other (MC2) was assigned to MMC2. Further data analysis and generation of the heatmaps was performed using the statistical computing and graphics software R (Version 4.0.2, http://www.r-project.org).

We used the protocol described by the centers for disease control and prevention for the CDC 2019 Novel Coronavirus (2019-nCoV) Real-Time RT-PCR Diagnostic Panel.

To detect antibodies, we used the Euroimmun Anti-SARS-CoV-2 ELISA (IgG), which was manufactured by Euroimmun Medizinische Labordiagnostika AG, Lübeck, Germany. The break-off microplate wells were covered with the antigen, a recombinant structural spike 1 (S1) protein of SARS-CoV-2 expressed in HEK293 [35] . First, the diluted patient samples were incubated in the wells which lead to specific IgG antibodies binding to the antigens. In order to detect the bound antibodies, an enzymelabelled anti-human IgG antibody detected antigen-antibody complexes and catalyzed a color reaction. By calculating the extinction of the sample over the extinction of the calibrator, the results could be evaluated semiquantitatively. A ratio below 0.8 was considered a negative result. A ratio between 0.8 and 1.1 was considered a borderline result. A ratio above 1.1 was considered a positive result [36] .

Data analysis and heatmap generation was performed using the statistical computing and graphics software R (Version 4.0.2, www.r-project.org).

The data set used for statistical analysis of the microarray results and for generation of all heatmap presentations was based on MMC2 values calculated from signals of the triplicate spots of each individual peptide. The MMC2 value calculation is described in detail in the "Microarray assay and data analysis" section.

The principle of the color coding of all heatmaps is described in the corresponding figure legends. The colored fields in the heatmaps reflect the calculated MMC2 values of each individual peptide.

The boxplots in Figures 1 and 2 show the median of the corresponding sample groups. The central rectangles span the first quartile to the third quartile (the interquartile range or IQR). The whiskers represent the following values: upper whisker = min(max(x), Quartile 3 + 1.5 * IQR); lower whisker = max(min(x), Quartile 1-1.5 * IQR). The points in the boxplots show the MMC2 values for the individual samples.

Statistical comparison of two sample groups was done by the Wilcoxon Rank Sum test (R package stats, n = 24 patient samples and n = 12 control samples). ROC analysis was performed using the R package ROCR. The selection of the peptide hits with significant separation between the sample groups was based on the accuracy value calculated as "(true positive + true negative)/total number of observations." An accuracy value of ≥0.4 was considered to indicate immunogenicity (Supporting information Table  S2 ).

The Spearman's rank correlation coefficient reflecting the relationship between the commercial ELISA and the peptide microarray (Fig. 3) was calculated as described in the figure legend using the R package ggpubr. Ethics approval statement: The study was conducted in agreement with the declaration of Helsinki. Ethical approval was obtained from the Ärztekammer Sachsen-Anhalt (approval reference number 64/20).

The peer review history for this article is available at https://publons.com/publon/10.1002/eji.202049101

The data that support the findings of this study are available from the corresponding author upon reasonable request.

WHO. Coronavirus disease (COVID-2019) situation reports. 2020. Available at

ENE-COVID): a nationwide, population-based seroepidemiological study

Serology assays to manage COVID-19

Diagnostic accuracy of serological tests for covid-19: systematic review and meta-analysis

Evaluation of serological tests for SARS-CoV-2: implications for serology testing in a low-prevalence setting

Serologic responses to SARS-CoV-2 infection among hospital staff with mild disease in eastern France

Humoral immune responses in COVID-19 patients: a window on the state of the art

Linear B-cell epitopes in the spike and nucleocapsid proteins as markers of SARS-CoV-2 exposure and disease severity

Epitope-resolved profiling of the SARS-CoV-2 antibody response identifies cross-reactivity with endemic human coronaviruses

Two linear epitopes on the SARS-CoV-2 spike protein that elicit neutralising antibodies in COVID-19 patients

SARS-CoV-2 proteome microarray for mapping COVID-19 antibody interactions at amino acid resolution

Mining of epitopes on spike protein of SARS-CoV-2 from COVID-19 patients

Mapping the immunodominance landscape of SARS-CoV-2 spike protein for the design of vaccines against COVID-19

Landscape and selection of vaccine epitopes in SARS-CoV-2

Distinct early IgA profile may determine severity of COVID-19 symptoms: an immunological case series

Viral epitope profiling of COVID-19 patients reveals crossreactivity and correlates of severity

Preexisting and de novo humoral immunity to SARS-CoV-2 in humans

Preliminary identification of potential vaccine targets for the COVID-19 coronavirus (SARS-CoV-2) based on SARS-CoV immunological studies

A sequence homology and bioinformatic approach can predict candidate targets for immune responses to SARS-CoV-2

The receptor binding domain of the viral spike protein is an immunodominant and highly specific target of antibodies in SARS-CoV-2 patients

Original antigenic sin shapes the immunological repertoire evoked by human cytomegalovirus glycoprotein B/MF59 vaccine in seropositive recipients

SARS corona virus peptides recognized by antibodies in the sera of convalescent cases

Assessment of synthetic peptides of severe acute respiratory syndrome coronavirus recognized by long-lasting immunity

A highly conserved cryptic epitope in the receptor binding domains of SARS-CoV-2 and SARS-CoV

SARS-CoV-2-reactive T cells in healthy donors and patients with COVID-19

Selective and cross-reactive SARS-CoV-2 T cell epitopes in unexposed humans

Sneak Peek, Covid-19 immune signatures reveal stable antiviral T-cell function despite declining humoral responses

A systematic review of antibody mediated immunity to coronaviruses: antibody kinetics, correlates of protection, and association of antibody responses with severity of disease

Cross-reactive antibody response between SARS-CoV-2 and SARS-CoV infections

Antibody dependent enhancement due to original antigenic sin and the development of SARS. Frontiers in immunology

A perspective on potential antibodydependent enhancement of SARS-CoV-2

Coherent membrane supports for parallel microsynthesis and screening of bioactive peptides

Quantification of the epitope diversity of HIV-1-specific binding antibodies by peptide microarrays for global HIV-1 vaccine development

Abbreviations: CV: coefficient of variation · HCoVs: human coronaviruses · MERS: Middle East Respiratory Syndrome · NP: nasopharyngeal · SARS: Severe Adult Respiratory Syndrome Full correspondence:Frank F. Bier