key: cord-1013426-gbfhyt4f
authors: Yan, Gangan; Li, Dongsheng; Lin, Yuan; Fu, Zhenghao; Qi, Haiyan; Liu, Xiaoping; Zhang, Jing; Si, Shuyi; Chen, Yunyu
title: Development of a simple and miniaturized sandwich-like fluorescence polarization assay for rapid screening of SARS-CoV-2 main protease inhibitors
date: 2021-12-05
journal: Cell Biosci
DOI: 10.1186/s13578-021-00720-3
sha: 5d619b1724715acf901fe6023b391b990e253343
doc_id: 1013426
cord_uid: gbfhyt4f

BACKGROUND: Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is highly transmissible and has caused a pandemic named coronavirus disease 2019 (COVID-19), which has quickly spread worldwide. Although several therapeutic agents have been evaluated or approved for the treatment of COVID-19 patients, efficacious antiviral agents are still lacking. An attractive therapeutic target for SARS-CoV-2 is the main protease (Mpro), as this highly conserved enzyme plays a key role in viral polyprotein processing and genomic RNA replication. Therefore, the identification of efficacious antiviral agents against SARS-CoV-2 Mpro using a rapid, miniaturized and economical high-throughput screening (HTS) assay is of the highest importance at the present. RESULTS: In this study, we first combined the fluorescence polarization (FP) technique with biotin-avidin system (BAS) to develop a novel and step-by-step sandwich-like FP screening assay to quickly identify SARS-CoV-2 Mpro inhibitors from a natural product library. Using this screening assay, dieckol, a natural phlorotannin component extracted from a Chinese traditional medicine Ecklonia cava, was identified as a novel competitive inhibitor against SARS-CoV-2 Mpro in vitro with an IC(50) value of 4.5 ± 0.4 µM. Additionally, dieckol exhibited a high affinity with SARS-CoV-2 Mpro using surface plasmon resonance (SPR) analysis and could bind to the catalytic sites of Mpro through hydrogen-bond interactions in the predicted docking model. CONCLUSIONS: This innovative sandwich-like FP screening assay enables the rapid discovery of antiviral agents targeting viral proteases, and dieckol will be an excellent lead compound for generating more potent and selective antiviral agents targeting SARS-CoV-2 Mpro.

Considering a serious threat, the World Health Organization (WHO) has declared COVID-19 to be a public health emergency of international concern. Remdesivir was recently approved by the Food and Drug Administration (FDA) for the treatment of hospitalized patients with COVID-19, but the trail from WHO showed that remdesivir has little benefit or no impact on survival for COVID-19 patients [1, 2] . Therefore, no efficacious antiviral agents are currently available to fight against COVID-19.

SARS-CoV-2 is a small, enveloped virus containing a single-stranded positive-sense RNA genome with a length of ∼ 30,000 nucleotides [3] . In viral fusion and cell entry processes, an essential step for its infection heavily depends on a high affinity between the receptor-binding domain (RBD) of spike glycoprotein and the host cell surface angiotensin-converting enzyme 2 (ACE2) [4, 5] . After infection initiates, viral genomic RNA adequately utilizes the host ribosome to translate two polyproteins (pp1a and pp1ab), which are efficiently cleaved by the main protease (Mpro) and papain-like protease (PLpro) to release 16 non-structural proteins (nsps) for viral genomic RNA replication. During this proteolytic processing, Mpro is responsible for 11 specific cleavage sites to generate 12 nsps [6] .

Mpro, a chymotrypsin-like cysteine protease (33.8 kDa) , is activated and matured in a homo-dimerization form [7] . Each monomer features a catalytic site containing a cysteine nucleophile. In particular, SARS-CoV-2 and SARS-CoV share 96% sequence identity in their Mpro sequences while their genomes only share approximately 82% identity. Mpro is a highly conserved and pivotal enzyme in SARS-CoV-2 life cycle, and mutations in Mpro are often rare. Importantly, closely related homologues are absent in human cells [6, 7] . Therefore, Mpro may be a promising antiviral target for the design of broad-spectrum antiviral agents [8] . Recently, several Mpro inhibitors have been identified via structure-based virtual screening assay, fluorescence resonance energy transfer (FRET) assay, colorimetric screening assay, cell-based luciferase complementation screening assay, green fluorescent protein (GFP) splitting screening assay, and phenotypic screening assay [9] [10] [11] [12] [13] [14] [15] . Among these reported screening approaches, virtual screening assay is a computational method for the discovery of potential Mpro inhibitors, but it remains challenging to accurately define hot spots in Mpro and efficiently remove the false positive hits [16] . The prevalent FRET and colorimetric screening assays can well mimic the in vivo proteolytic process, but these enzymatic kinetics assays are usually unstable and expensive because of the large amounts of substrates consumed in a high-throughput screening (HTS). Moreover, due to auto-fluorescence interferences, natural products may quench the emission fluorescence of a FRET fluorogenic substrate, and false positive hits are inevitably present [17] . The cell-based luciferase and GFP splitting assays are frequently associated with a high screening cost, tedious cell culture, long screening cycles and poor repeatability. A high-cost phenotypic screening assay must be operated in biosafety level-3 (BSL-3) laboratory, and the complexity of this approach is not readily compatible with HTS pipelines. In addition, the target validation of positive hits remains extremely challenging [7] . At present, COVID-19 is becoming a serious health care crisis globally because frequent mutations of SARS-CoV-2 increase the infectivity to human and reduce the effectiveness of approved vaccines [18] [19] [20] . Thus, there is an urgent need to develop a simple, miniaturized and cheap HTS assay for rapid screening of novel antiviral agents targeting SARS-CoV-2 Mpro [21] .

Here, we first combined the fluorescence polarization (FP) technique with biotin-avidin system (BAS) to develop and optimize a novel sandwich-like FP screening assay for quick identification of SARS-CoV-2 Mpro inhibitors. This innovative and step-by-step sandwichlike FP screening assay can be easily popularized to facilitate rapid large-scale screening of antiviral agents targeting viral proteases.

A codon-optimized SARS-CoV-2 Mpro gene was cloned into a pET-21a(+) vector, and the soluble Mpro was expressed in E. coli Rosetta (DE3) cells. Subsequently, the highly expressed Mpro was purified by a HisTrap TM chelating column (Fig. 1a) . In order to characterize its enzymatic activity and to determine a kinetic FRET assay condition, we designed a fluorescently labeled FRET substrate, MCA-AVLQSGFR-Lys(Dnp)-Lys-NH 2 , derived from the N-terminal auto-cleavage sequence of the viral protease [7] . We analyzed the Mpro proteolytic activity in 3 buffers with different pH and found that Mpro displays a highest velocity in pH8.0 buffer (Fig. 1b) , which contains 10 mM Tris, 50 mM NaCl, 1 mM EDTA, and 1 mM 1,4-dithiothreitol (DTT). Based on a fact that theoretical pI of Mpro is 6.56, thus, all the following proteolytic kinetics assays were performed using this pH8.0 buffer. A standard curve was generated to convert the relative fluorescence unit (RFU) to the amount of the cleaved FRET substrate (pmol), and k cat value was calculated using this plotted equation (Fig. 1c) . Next, we characterized the proteolytic activity of purified Mpro by measuring the K m and V max values. When 0.25 µM Mpro was mixed with various concentrations of FRET substrate (0-45 µM), the initial velocity (V I ) was measured separately to plot a reaction curve. Michaelis-Menten equation gave the best-fit values of K m and V max as 19.78 µM and 153.8 ΔRFU/s, respectively (Fig. 1d) . The calculated k cat /K m was 6990 s −1 M −1 , which is slightly higher than the previously reported value of 3426.1 ± 416.9 s −1 M −1 [22] , suggesting that the additional polyhistidine tag at the C terminus of Mpro is not detrimental to its proteolytic activity. This validation of the enzymatic activity of purified Mpro is crucial for the development of a reliable sandwich-like FP screening assay.

Because of the inadequacy of existing HTS methods, we first developed a novel sandwich-like FP screening assay for the rapid discovery of antiviral agents targeting Mpro. FP technique has been widely utilized to identify antagonists targeting protein-protein interactions in drug . a Expression and purification of SARS-CoV-2 Mpro. The highly active Mpro was expressed in E. coli Rosetta (DE3) cells as the soluble protein after induction with 0.2 mM IPTG at 30 °C for 8 h. A HisTrap TM chelating column was used to purify polyhistidine-tagged Mpro from E. coli cell extracts, and then the purity of purified Mpro was analyzed using SDS-PAGE. M: protein marker; 1: total cell extracts after IPTG induction; 2: supernatant of the cell lysate; 3: precipitated Mpro in 25% saturated ammonium sulfate solution; 4: purified Mpro band (34 kDa). b Reaction buffer optimization. The reaction mixture containing 0.25 µM Mpro and 10 µM FRET substrate was incubated in the indicated three buffers, and the change of RFU value was continuously recorded by a microplate reader (BioTek) using a FRET assay. The initial velocity (V I ) of the proteolytic activity was calculated by a linear regression for the first 30 s of the kinetic progress, and the curve was plotted in GraphPad Prism 5.0. c Plotting the MCA standard curve to convert RFU value to the amount of the cleaved FRET substrate (pmol) using the derived equation. MCA: 7-methoxycoumarin-4-acetic acid. d Calculation of Mpro kinetic constant K m and k cat values in the FP assay buffer. The Michaelis-Menten equation of Mpro proteolytic kinetics was plotted using GraphPad Prism 5.0 according to the V I , and then K m , V max and k cat values were calculated discovery field [23] . In a FP screening assay, the change of millipolarization unit (mP) value is dependent on the molecular weight of fluorescent moiety provided that temperature and viscosity remain constant. For a small fluorescent tracer, the interaction with a macromolecule can be continuously monitored through the increase of mP value when the binding complex is formed. In this study, we first combined this FP technique with BAS to develop a novel and step-by-step sandwich-like FP screening assay to quickly identify inhibitors against Mpro. More importantly, this innovative FP screening assay is a simple, economical and practical strategy to rapidly screen large compound libraries for the discovery of novel Mpro inhibitors.

As previously described in a FRET assay, we synthesized a fluorescein isothiocyanate (FITC) and biotin dual-labeled small peptide as a FP tracer, FITC-AVLQS-GFRKK-Biotin (FITC-S-Biotin), which was generated from previously used FRET substrate. Ideally, the highly active Mpro can adequately hydrolyze this FP tracer to yield two peptide fragments, FITC-AVLQ and SGFRKK-Biotin. This FITC labeled small peptide with smaller molecular weight emits light in all directions due to a fast rotation, resulting in a low FP signal. If the excited FP tracer is bound to a large protein avidin, it rotates slower due to the formation of a large binding complex. As a result, the emitting light remains in the same direction as that of the incident light, exhibiting a high FP signal. If bioactive compounds inhibit Mpro enzymatic activity, the excited uncleaved FP tracer is bound to a large binding partner avidin, and FITC-labeled complex has a higher molecular weight, resulting in a slow rotation and high mP value. In contrast, if the excited FP tracer is cleaved by Mpro to release a small FITC-AVLQ fragment, this cleaved small peptide fragment would rotate more rapidly, resulting in a low mP value due to the Schematic scenario for a sandwich-like FP screening assay principle. This first reported sandwich-like FP screening assay is based on the FP technique combining with BAS. Incubation of FP tracer (FITC-S-Biotin, purple dashed line) with Mpro (scissor) and subsequent addition of avidin (red crescent) produced a FP signal that was proportional to the relative amount of cleaved and uncleaved FP tracer. The uncleaved FP tracer produced a high mP value upon binding to avidin because of the exciting of bioactive compounds (blue hexagon), whereas the cleaved, a small FITC-AVLQ fragment that cannot bind to avidin produced a low mP value because of the exciting of inactive compounds (yellow hexagon). This newly developed screening protocol is mainly divided into three separate steps for laboratory use, and the appearance of this screening system looks like a sandwich existing of inactive compounds (Fig. 2) . Thus, any potential bioactive compounds targeting Mpro can be rapidly and easily identified by intensively monitoring the change of mP value in this sandwich-like FP screening assay.

As previously noted, we used FITC-AVLQSGFRKK-Biotin as the tracer in this FP screening assay, but the working concentration of the FP tracer can affect the screening assay sensitivity and cost. To select an optimal working concentration of the FP tracer, we examined the mP values of the FP tracer in various concentrations. A negligible variation of the mP signal was observed when FP tracer concentration was diluted below 100 nM. Importantly, the lowest concentration (10 nM) still provided a reliable mP signal. The mP signal was quite stable when the concentration of FP tracer was increased from 10 to 60 nM (Fig. 3a) . Considering the significance of high sensitivity with the lowest background, we selected 20 nM of FP tracer as an optimal working concentration for this FP screening assay.

The activity of bioactive compound in this FP screening assay only relies on the binding of avidin to the FP tracer labeled with both FITC and biotin. Mpro could cleave the FP tracer to generate a small FITC-AVLQ fragment. The maximum mP (mP max ) value was determined by titration of uncleaved FP tracer with avidin as shown in Fig. 3b . The mP max value reached 180 with the addition of sufficient avidin, and it did not increase further after addition of more avidin. Based on the titration shown in Fig. 3b , we chose to quench this FP screening assay with 50 nM avidin. Obviously, this represented a 10-fold molar excess of tetrameric avidin in binding equivalence. The excess avidin used in this FP screening assay could efficiently quench the enzymatic reaction by making the FP tracer inaccessible to Mpro.

Because the proteolytic reaction of Mpro was typically time and temperature-dependent in this FP screening assay, an optimized incubation time was first determined at room temperature (RT). Surprisingly, the apparent half concentration of maximal effect (EC 50 ) and dynamic range (ΔmP) values showed little changes from 20 to 40 min, indicating that a complete proteolytic reaction ends within 20 min (Fig. 3c, d) . Based on the time course of the apparent EC 50 values, the incubation time of Mpro proteolytic reaction process could be defined in 20 min in this FP screening assay. As illustrated in Fig. 3e and f, the changes of apparent EC 50 and ΔmP values were quite stable after incubation at 20 °C, 25 °C, 30 and 37 °C for 20 min, respectively. Moreover, both mP values and proteolytic reaction curves were highly overlapped during this period of incubation. All these data strongly suggested that Mpro proteolytic reaction is significantly stable, and the reaction mixture should be incubated for 20 min at RT in the natural product screening.

The concentration of dimethyl sulfoxide (DMSO), a commonly used dissolvent, was also tested in this FP screening assay. The Mpro proteolytic reaction curves were well maintained even in the presence of up to 5% DMSO, and the apparent EC 50 and ΔmP values also showed a stable dynamic range (Fig. 3g, h) . These results suggested that the actual working concentration of DMSO used in this assay is less than 5% to achieve a reliable screening for natural products.

Another important question is what concentration of Mpro should be used in this FP screening assay because Mpro concentration has a decisive influence on the sensitivity of this screening assay. Using the optimized conditions mentioned above, a proteolytic course for the cleavage of the 20 nM FP tracer at the indicated Mpro concentrations was determined. In this proteolytic reaction, the cleaved FP tracer has a low mP value, but the uncleaved FP tracer has a high mP value. The result in Fig. 3i showed a significant decrease of mP value as more FP tracer is cleaved by Mpro. In the presence of 200 nM Mpro, the minimum mP (mP min ) value appeared and yielded ΔmP value of 140 as the dynamic range, (See figure on next page.) Fig. 3 Optimization of the newly developed sandwich-like FP screening assay. a Determination of an optimal working concentration of FP tracer in a FP screening assay. After addition of the FP tracer dilution at an indicated concentration in a black 384-well microplate, the mP value was measured. The dashed line in the presented figure represents the average of mP values. b The binding curve between FP tracer and avidin. A fixed amount of FP tracer was incubated with avidin at the indicated concentrations for 5 min at RT, and then the mP value was monitored. The maximal mP value (mP max ) indicated the arrival of the binding plateau, and an optimal amount of avidin was determined for screening. c, d The proteolytic reaction progression curves of Mpro at the indicated time. The mixture containing a fixed amount of FP tracer and increasing concentrations of Mpro was incubated at different time intervals. After quenching the proteolytic reaction by avidin, mP value was recorded to determine the EC 50 and ΔmP values. e, f The proteolytic reaction progression curves of Mpro at the indicated temperature. The reaction mixture as described above was incubated for 20 min at the indicated temperature. After plotting the reaction curve according to the mP value, the EC 50 and ΔmP values were compared separately to determine an optimal working temperature. g, h DMSO tolerance test in a FP screening assay. The proteolytic reaction curves of Mpro in the absence or presence of up to 10% DMSO were plotted. All experiments were independently repeated in triplicate. i Determination of an optimal concentration of Mpro at the optimized conditions in a FP screening assay. The reaction mixture was incubated for 20 min at RT, and then quenched by avidin. After measurement of mP value, the proteolytic reaction curve was plotted. The minimum mP value (mP min ) indicated an endpoint of proteolytic reaction, which can be regarded as an optimal working concentration of Mpro used in this FP screening assay indicating the endpoint of Mpro proteolytic reaction. Based on this result, 200 nM of Mpro was selected for this FP screening assay to achieve a quite large dynamic range and high sensitivity.

GC-376, a commonly used covalent pancoronavirus inhibitor against Mpro, has been widely used to verify the sensitivity and accuracy of a newly developed screening assay for the discovery of Mpro inhibitors [11, 13, 14] . As expected, GC-376 exhibited a half-maximum inhibitory concentration (IC 50 ) value of 127.5±6.5 nM in this FP screening assay (Fig. 4a) . Our observed inhibitory activity of GC-376 was highly consistent with the published reports in a FRET screening assay [24, 25] . Together, the result from this experiment adequately demonstrated the technique feasibility and reliability of this FP screening assay for rapid discovery of Mpro inhibitors.

The statistical parameter Z factor, which is commonly used to assess the total quality of a HTS method, was determined in a black 384-well microplate. In general, only HTS assays with Z factor of 0.5 or higher are suitable for screening, and the assays with smaller Z factor are required to be further optimized [23] . To assess this FP screening assay, 1 µM of GC-376 was used to serve as a positive control for quality assessment. As shown in Fig. 4b , the Z factor of this FP screening assay was 0.85, indicating that this assay is robust and amenable to HTS.

In the primary screening, a library of 5000 natural products was screened for the rapid discovery of Mpro inhibitors using an optimized FP screening assay. Considering the stringent caution of DTT addition for the accuracy in candidate compound screening [26] , all the FP screening assays were performed in the presence of 1 mM DTT. This primary screening identified 8 compounds that exhibited IC 50 values of >50% at the screening concentration (Fig. 5a) . Subsequently, a dose-response curve analysis showed that dieckol is a novel SARS-CoV-2 Mpro inhibitor, with an IC 50 value of 4.5 ± 0.4 µM (Fig. 5b, c) . More interestingly, dieckol also exhibited a strong inhibition against Mpro with an IC 50 value of 2.9 ± 0.2 µM in the absence of DTT (Fig. 5c) , and the inhibitory activity of dieckol was not significantly affected by addition of DTT in a FP screening assay.

Surface plasmon resonance (SPR) technology has been widely used in assessing the binding affinity between bioactive compound and target protein, and has been regarded as a conventional biochemical method in the analysis of analyte binding affinity [23, 27] . The real-time SPR binding kinetics showed that dieckol significantly increased the real refractive index unit (RIU) response in a dose-dependent manner, and the dissociation constant (K D ) was recorded as 0.22 µM, indicating a strong interaction between dieckol and Mpro in vitro (Fig. 5d) . Moreover, dieckol exhibited a clear feature of fast-associating (k a = 1.02 × 10 −3 /M s) and slow dissociating (k d = 2.26 × 10 −4 /s) inhibition mode, suggesting a strong target occupancy.

To interrogate the inhibition mechanism of dieckol against Mpro, we performed various enzyme kinetics studies with the indicated concentrations of dieckol using a FRET assay. As shown in Fig. 6a , dieckol exhibited a significant dose-dependent inhibitory activity against Mpro with an IC 50 value of 3.8 ± 0.3 µM in a Fig. 4 The quality assessment of the FP screening assay. a The inhibitory activity of GC-376 in a FP screening assay. Briefly, 30 µL mixture of 0.4 µM Mpro and GC-376 at the indicated concentrations was preincubated for 35 min at RT, and then 30 µL dilution of 40 nM FP tracer was added to initiate the proteolytic reaction. After addition of avidin, the mP value was measured to calculate the IC 50 value of GC-376. Three independent experiments were performed. b Assessment of Z factor of the FP screening assay. GC-376 was used as a positive control, and the measured mP value from negative and positive wells were shown, respectively. The Z factor of this FP screening assay was 0.85, and a high signal window was represented by a black straight line. The experiment was performed in triplicate FRET assay. Interestingly, the absence of DTT did not notably alter this inhibitory curve, and the measured IC 50 value was 1.8 ± 0.2 µM (Fig. 6b) . These results were consistent with the observations in a FP screening assay. Next, these obtained inhibition data of dieckol were analyzed using Lineweaver-Burk (LB) plot graphical method to determine the possible kinetic model. Notably, subsequent LB plot yielded a series of straight lines with the same y-axis intercept in the presence of dieckol at the indicated concentrations, suggesting that dieckol is a competitive inhibitor against Mpro with an inhibitory constant (K i ) value of 3.3 µM, because of an obvious character of the same V max but varying K m values in the presence of dieckol at different concentrations (Fig. 6c, d) .

Next, a computational docking stimulation was performed to further investigate the inhibition mechanism of dieckol. The reported crystal structure of Mpro in complex with MI-23 (PDB code: 7D3I) was retrieved as the dieckol docking target [28] . As shown in Fig. 7a and b, the hydroxyl group of dieckol formed a conventional hydrogen bond with Cys145 (2.24 Å) and a Pi-Pi interaction (4.59 Å) with His41, which are the catalytic residues of Mpro. Additionally, the hydroxyl group of dieckol formed another hydrogen bond with Gly143 (2.74 Å) for further anchoring dieckol to the catalytic sites of Mpro. This simulation result showed that dieckol has a C-Docking score value of 82.75. This predicted docking model suggested that dieckol binds to the catalytic sites of Mpro through strong hydrogen-bond interactions, which supports a competitive inhibition mechanism of dieckol against Mpro.

The current COVID-19 pandemic has imposed a huge and unprecedented global healthcare crisis. Researchers around the world have made extensive efforts to develop effective vaccines and antiviral agents to fight against COVID-19. However, no efficacious antiviral agents are currently available to prevent or treat SARS-CoV-2 infection. The genetic reshuffling, mutations, and interspecies transmission of the RNA viruses highlight the urgent need for the development of broad-spectrum antiviral drugs. The highly conserved Mpro is responsible for the viral polyprotein proteolytic process and genomic RNA replication. Thus, Mpro has been considered to be a promising therapeutic target for the development of antiviral agents [6] [7] [8] . Currently, the screening and characterization of novel Mpro inhibitors using a rapid, simple and miniaturized HTS assay are of crucial importance [21] .

The homogenous and highly sensitive FP technique has been widely used in drug discovery, analytical biochemistry, measurement of biomolecular activity and disease diagnosis [23, [29] [30] [31] . This powerful approach is based on a fact that a positive alteration in apparent molecular weight of a fluorescent moiety in solution is indicated by an increasing change of mP value in a FP assay. In this study, we have developed a simple and miniaturized screening assay for rapid discovery of Mpro inhibitors using this FP technique combined with BAS. The decrease of mP value is caused by release of a small FITC-AVLQ fragment after the cleavage of FP tracer by Mpro, but bioactive compound may strongly inhibit this proteolytic activity. As a result, the inhibitory activity of bioactive compound produces an increased mP value because of the formation of a high molecular weight of avidin-tracer complex. Hence, validation of bioactive Fig. 5 The primary screening of a natural product library. a A general view for the primary screening. The red dashed line in the figure indicated 50% inhibition, and the inhibitory activity of candidate compound was higher than this defined red line. b The chemical structure of dieckol, a natural phlorotannin component extracted from Ecklonia cava. c The inhibitory activity of dieckol in the FP screening assay. The inhibitory analysis of dieckol in the absence or presence of 1 mM DTT was performed as described for GC-376. The IC 50 value of dieckol was analyzed using GraphPad Prism 5.0. All assays were performed in triplicate. d Analysis of interaction between dieckol and Mpro using the SPR assay. The binding kinetics of dieckol (0, 6.25, 12.5, 25 µM) to immobilized Mpro was plotted according to the change of RIU value compound can be conveniently achieved by directly measuring the increase of mP value. In this sandwich-like FP screening assay, a small FP tracer modified by a FITC moiety on the N-terminus and a biotin group on the C-terminus is derived from Mpro natural cleavage site, and this similar peptide was also used in a reported FRET assay [7] . Moreover, this FP tracer can be cleaved efficiently by active Mpro prepared in E. coli cells. To further improve the reliability and sensitivity, various biochemical conditions including the concentration of FP tracer, incubation time, temperature, DMSO tolerance, and the concentration of Mpro were systematically optimized in this FP screening assay. Subsequently, a high-quality FP screening assay with a high Z factor (0.85) was successfully developed. Furthermore, GC-376, a covalent Mpro inhibitor identified by a FRET screening assay, exhibits a strong inhibitory activity in this developed approach, and this result consists with the literature reports [24, 25] . Therefore, this FP screening assay shows a high selectivity and sensitivity. Unlike a FRET assay reported previously, the FP screening assay developed in this research is more homogeneous, rapid, robust, and economical. Because only a small amount FP tracer is used (20 nM/well) in this protocol and it takes less than one hour to finish each Fig. 6 The inhibition mechanism of dieckol. a The inhibitory activity of dieckol in the FRET assay. Mpro (0.4 µM) was preincubated with the indicated concentrations of dieckol at RT for 35 min in the presence of 1 mM DTT in FP assay buffer. After addition of FRET substrate, the RFU value was separately measured every second for 3 min by a microplate reader (BioTek). The V I was calculated by the slope of a linear regression in the first 30 s. DMSO and GC-376 (1 µM) was used as the negative and positive control, respectively. The RFU value was notably quenched by dieckol in a dose-dependent manner. b The inhibitory activity of dieckol in the absence or present of DTT. The IC 50 values were separately obtained from dose-response curves by plotting the V I against various concentrations of dieckol in GraphPad Prmis 5.0. c The Lineweaver-Burk plots for analysis the inhibition mechanism of dieckol on Mpro using a FRET assay. d The secondary plots for a K i value of dieckol in the FRET substrate screening cycle, this FP screening system is very cheap, simple and rapid, which is ideal for a large-scale screening. Moreover, this FP screening assay directly monitors the endpoint change of mP value rather than relative quenching ratio in a FRET screening system. Considering this biochemical feature, the FP screening assay is more reproducible. Furthermore, the effect of potential fluorescent interferants is minimized because the fluorophore, FITC, used in this system has a high quantum yield for emission at 535 nm wavelength, which is outside the range of most fluorescent molecules in natural products.

Using this innovative FP screening assay, a pilot screening of natural product library was performed to identify potent inhibitors targeting Mpro. As a result, dieckol exhibited a dose-dependent inhibitory activity against Mpro in this screening assay. Moreover, dieckol showed a similar inhibitory activity in a FRET kinetics assay with a K i value of 3.3 µM. Dieckol is a major natural phlorotannin ingredient extracted from a Chinese traditional medicine Ecklonia cava, which was documented in Compendium of Materia Medica published in Chinese Ming dynasty. Ecklonia cava is widely used as a folk medicine for the treatment of goiter, scrofula, urinary diseases, anti-asthmatic, and postpartum women [32] . As a natural component, dieckol shows a broad range of bioactivities, including antibacterial, anticancer, antioxidant, antidiabetic, and other medicinal applications [33] . Recent studies have shown that dieckol exhibits antiviral activity by inhibiting HIV reverse trancriptase, SARS-CoV main protease and influenza A virus neuraminidase [34] [35] [36] . A recent molecular dynamics simulation has predicted that dieckol might be a potential antiviral agent targeting RBD-ACE2 interaction [37] , but more solid biochemical evidence for its antiviral mechanism is urgently needed [38] . Unlike the previously reported covalent and peptidomimetic inhibitors, our systematic biochemical studies warrant that dieckol is a novel competitive inhibitor against Mpro in vitro. However, more in vivo experiments will be required for further validation.

Overall, we combined the FP technique with BAS for the first time to develop a novel sandwich-like FP screening assay for rapid discovery of Mpro inhibitors. Importantly, from a natural product library, dieckol is identified as a novel competitive inhibitor against Mpro in vitro. This newly developed FP screening assay can be easily generalized for rapid large-scale screening of antiviral agents targeting viral proteases. As a promising lead compound, dieckol provides an excellent starting point to generate more potent and selective antiviral agents targeting Mpro.

The natural product library, GC-376, and 7-methoxycoumarin-4-acetic acid (MCA) were purchased from Tar-getMol (Shanghai, China), and the purity was more than 97.0% in mass spectrometry analysis. Dieckol was commercially provided by Yuanye Biotech (Shanghai, China). All tested compounds were dissolved in DMSO at a final concentration of 20 mM, and stored at − 20 °C before use. The FRET fluorogenic substrate (MCA-AVLQSGFR-Lys(Dnp)-Lys-NH 2 ), FP tracer (FITC-AVLQSGFRKK-Biotin) and FITC-AVLQ peptide were chemically Fig. 7 The predicted molecular docking mode of dieckol in the catalytic sites of Mpro crystal structure. a A molecular docking model between dieckol and the catalytic sites of Mpro. The blue sticks represent the functional amino acids interacting with dieckol, which are exhibited by a stick model. b A detailed illustration for dieckol binding to the catalytic sites of Mpro. The residues of Cys145 and Gly143 formed strong hydrogen-bond interactions highlighted by the green dashed lines with the hydroxyl group and the oxygen atom of dieckol, respectively. A purple dashed line indicated a Pi-Pi interaction between His41 and benzene ring of dieckol synthesized (GL Biochem Shanghai Co. Ltd., Shanghai, China), and the purity was more than 95.0%.

SARS-CoV-2 main protease (Mpro) was prepared as previously described in reported publications [39, 40] . Briefly, a codon-optimized DNA sequence encoding SARS-CoV-2 Mpro (GenBank: YP_009725301.1) was chemically synthesized by Gene Universal Biotech (Chuzhou, China), and then cloned into a pET-21a(+) vector with NdeI and XhoI restriction sites. The N-terminal methionine is removed by E. coli methionine aminopeptidase, and there are extra LEHHHHHH residues at the C terminus.

For Mpro purification, the soluble Mpro was expressed in E. coli Rosetta (DE3) cells after induction with 0.2 mM IPTG at 30 °C for 8 h. The induced E. coli cells were harvested and resuspended in the lysis buffer (50 mM Tris, 150 mM NaCl, pH8.0) for sonication. After removing the cell debris by centrifugation, the supernatant was purified by an affinity chromatography method using a HisTrap TM chelating column (Cytiva, Uppsala, Sweden), and then the purity of purified Mpro was further analyzed by SDS-PAGE. Subsequently, all fractions were dialyzed overnight in TBS buffer (25 mM Tris, 150 mM NaCl, 1 mM EDTA, 1 mM DTT, pH8.0) and stored at − 80 °C before use.

A MCA standard curve was plotted as previously described [39] . MCA was diluted to 500, 250, 125, 62.5, 31.25 pmol using the FP buffer (10 mM Tris, 50 mM NaCl, 1 mM EDTA, 1 mM DTT, pH8.0), and then added to a black 384-well microplate (PerkinElmer, Waltham, USA) in triplicate. The relative fluorescence units (RFU) values were measured with an excitation wavelength of 320 nm and emission wavelength of 405 nm at 25 °C using a microplate reader (BioTek, Winooski, USA). The RFU signal was plotted against total MCA amount (pmol) to produce a linear curve and an equation.

As previously described, the enzymatic kinetics was determined using a FRET assay [39] . For reaction buffer optimization, the mixture containing 0.25 µM Mpro and 10 µM FRET substrate in various pH values was added to a black 384-well microplate. Subsequently, the change of RFU value was continuously recorded every second for 3 min by a microplate reader with an excitation wavelength of 320 nm and emission wavelength of 405 nm at room temperature (RT). The initial velocity (V I ) of the proteolytic activity was calculated by a linear regression for the first 30 s of the kinetic progress curve plotted in GraphPad Prism 5.0. Experiments were performed in triplicate. All the following enzymatic assays were carried out in pH8.0 buffer, because Mpro displays the highest proteolytic activity in pH8.0 buffer. These used reaction buffers are listed as below: buffer #1 (10 mM MES, 50 mM NaCl, 1 mM EDTA, 1mM DTT, pH6.0); buffer #2 (10 mM HEPES, 50 mM NaCl, 1 mM EDTA, 1mM DTT, pH7.0); buffer #3 (FP assay buffer: 10 mM Tris, 50 mM NaCl, 1 mM EDTA, 1 mM DTT, pH8.0).

For the measurement of K m and k cat values, a FRET substrate was added into the Mpro solution (0.25 µM) to generate 8 final concentrations ranking from 1.25 to 45 µM in 50 µL of FP assay buffer. The proteolytic reaction progression was immediately monitored every second for 3 min by a microplate reader, and the V I was calculated for the first 30 s by a slope of a linear regression. The V I was plotted against the FRET substrate concentration using a Michaelis-Menten equation in GraphPad Prism 5.0. The K m and k cat values were calculated using this fitted equation and MCA standard curve.

The measurement for the optimal amount of the used FP tracer in this FP screening assay followed the published protocol [23] . Briefly, the FP tracer (2 mM) was diluted to the fixed concentrations ranking from 1.25 to 100 nM in the FP assay buffer, and 60 µL of the dilutions were pipetted into a black 384-well microplate in triplicate. After incubation for 15 min at RT, the mP value was recorded by a microplate reader with the excitation at 485 nm and emission at 535 nm.

To determine the optimal concentration of avidin (Sigma-Aldrich, St. Louis, USA) in this FP screening assay, 40 nM FP tracer (30 µL/well) was mixed thoroughly with 30 µL of the avidin dilutions (0∼200 nM, 30 µL/well) in a black 384-well microplate in triplicate. The reaction mixture was incubated for 5 min at RT, and then the measurement of mP value was followed as described above.

For the FP screening assay stability test, 40 nM FP tracer (30 µL/well) was gently mixed with the increasing concentrations of Mpro dilutions (0∼500 nM, 20 µL/well) in a black 384-well microplate in triplicate, and incubated for 5, 10, 20, 30, 40 min at RT, respectively. After addition of avidin (300 nM, 10 µL/well), the reaction mixture was further incubated for 5 min at RT, and then the mP value was separately recorded by a microplate reader.

As described above, the reaction mixture containing 40 nM FP tracer (30 µL/well) and Mpro dilutions (0∼500 nM, 20 µL/well) was incubated for 20 min at 4, 20, 25, 30, 37 °C, respectively. After quenching the proteolytic reaction by avidin, the mP value was measured separately.

For DMSO tolerance assay, varied concentrations of DMSO (from 0 to 10%) were added into the mixture containing 40 nM FP tracer (30 µL/well) and Mpro dilutions (0∼500 nM, 20 µL/well), and the reaction mixture was incubated for 20 min at RT. After quenching by avidin for additional 5 min, the mP value was monitored as described above. All the proteolytic reaction curves of Mpro in previously mentioned experiments were plotted, and the EC 50 and dynamic range (ΔmP) values were calculated using these fitted curves plotted by GraphPad Prism 5.0. All mentioned assays were independently performed in triplicate.

As mentioned above, the reaction mixture containing 40 nM FP tracer (30 µL/well) and Mpro dilutions (0∼500 nM, 20 µL/well) was incubated for 20 min at RT. The mP value was measured after additional 5 min incubation of avidin. The proteolytic reaction curve of Mpro was plotted using GraphPad Prism 5.0. An optimal working concentration of Mpro should be regarded as a minimum amount of Mpro, which can adequately cleave the FP tracer into a small FITC-AVLQ fragment in the FP screening assay.

In all, 30 µL sample of 400 nM Mpro was incubated with various concentrations of GC-376 (8 two-fold dilutions; initial concentration: 2 µM) for 35 min at RT in a black 384-well microplate. Later, 20 µL sample of 60 nM FP tracer was added and incubated for 20 min at RT. After incubation of avidin for 5 min, the measurement of mP value was performed by following the previous protocol, and the inhibitory curve of GC-376 was plotted using GraphPad Prism 5.0. In this inhibitory activity test, the FITC-AVLQ peptide-free well was used as a negative control, and the well containing FITC tracer/avidin binding complex was used as a positive control. Three independent assays were performed. The IC 50 value of GC-376 was calculated using the following equation:

where µ Hit , µ N and µ P represent the average mP values of the tested inhibitor, negative control, and positive control, respectively.

For the determination of Z factor, 30 µL sample of 400 nM Mpro and 1 µM GC-376 (positive control) or DMSO (negative control) was incubated for 35 min at RT, respectively. Each control contained 100 wells in a black 384-well microplate. As described above, the measurement of mP value was performed using a microplate

reader. The Z factor was calculated according to following equation [23] :

where µ N and µ P are the average of mP values obtained from the negative and positive controls, respectively. SD N and SD P are the standard deviations.

In this FP screening assay, 29 µL sample of 400 nM Mpro diluted in the FP assay buffer was mixed with 1 µL of natural product (1 mg/mL in DMSO) in a black 384-well microplate, and the mixture was further incubated for 35 min at RT before adding 20 µL sample of 60 nM FP tracer. After proceeding for 20 min at RT, the reaction was quenched by addition of 10 µL sample of 300 nM avidin, and the mP values were measured by a microplate reader. In each assay plate, GC-376 (1 µM) and DMSO were used as a positive and negative control, respectively. The well containing only 60 µL sample of 20 nM FITC-AVLQ peptide was used to assess the background noise. The inhibitory activity of screening compound was calculated using Eq. (1), and the candidate compounds (> 50% inhibition) were analyzed in triplicate to generate the dose-response curves in the second screening. The inhibitory activity of dieckol in this FP screening assay was carried out as mentioned above. The initial concentration of dieckol was 100 µM, and 8 two-fold dilutions were prepared for the determination of IC 50 value. To remove the DTT effect on the enzymatic assay [26] , the IC 50 value was also obtained in the absence of DTT in a FP screening assay.

The binding affinity between dieckol and Mpro was measured using a real-time SPR spectroscopy instrument (Reichert 2SPR, Buffalo, USA). In all, 20 µL Mpro (1.6 mg/mL) in 10 mM NaAc buffer (pH5.5) was immobilized to a surface activated CM5 gold biosensor (Reichert Inc., New York, USA), and the active sites were quenched with 1 M ethanolamine buffer (pH8.0). After washing the sample loop, an indicated concentration of dieckol (0, 6.25, 12.5, 25 µM) was separately injected on the surface of the Mpro-captured biosensor at RT. The binding time of the analyte to the ligand was 90 s, and the dissociation kinetic was recorded during 330 s. Finally, the real RIU was continuously monitored, and the RIU can be related to arbitrary resonance unit (RU) as 1 µRIU = 0.733 RU. The K D value was calculated using the analyte binding kinetic curve plotted by Trace Drawer software (Ridgeview Instruments, Sweden).

(2) Z = 1 − 3 × (SD N + SD P ) |µ N − µ P |

As described previously, the inhibitory activity of dieckol against Mpro was preformed using a FRET assay [11, 24] . In brief, 50 µL sample of Mpro (0.4 µM) was preincubated with the indicated concentrations of dieckol (initial concentration: 100 µM, 8 two-fold dilutions) at RT for 35 min in FP assay buffer, and the reaction was initiated by adding 5 µM FRET substrate. DMSO and GC-376 (1 µM) was used as a negative and positive control, respectively. The RFU change was separately measured as described previously every second for 3 min by a microplate reader. The V I was calculated by a slope of the linear regression in the first 30 s, and the IC 50 value was calculated using the following equation:

All experiments were performed in triplicates.

To clarify the inhibitory mechanism of dieckol, the fixed concentrations of dieckol (0, 2, 4, 6 µM) were separately added to 50 µL sample of Mpro (0.4 µM), and the mixture was preincubated for 10 min at RT. After adding 5 µM FRET substrate, the V I was measured using a FRET assay. The inhibition mechanism of dieckol was inferred using the LB plot and a K i value was generated by its secondary plot [35, 41, 42] .

Molecular docking analysis was performed using BIO-VIA Discovery Studio 2018R2 software (Accelrys, San Diego, USA), and the reported crystal structure of Mpro in complex with MI-23 (PDB code: 7D3I) was retrieved as the dieckol docking target [28] . After removing the water molecules, a possible binding pocket of dieckol in Mpro was defined according to the hot spots published previously to identify the potential hydrogen-bond interactions between the catalytic sites of Mpro and dieckol [7, 28] . The optimized docking result was generated and processed using C-DOCKER program. 

Covid-19: What now for remdesivir?

Covid-19: Remdesivir has little or no impact on survival, WHO trial shows

SARS-CoV-2: from its discovery to genome structure, transcription, and replication

Cell entry mechanisms of SARS-CoV-2

ACE2: the molecular doorway to SARS-CoV-2

Targeting the Dimerization of the Main Protease of Coronaviruses: A Potential Broad-Spectrum Therapeutic Strategy

Structure of M pro from SARS-CoV-2 and discovery of its inhibitors

The main protease and RNA-dependent RNA polymerase are two prime targets for SARS-CoV-2

Identify potent SARS-CoV-2 main protease inhibitors via accelerated free energy perturbationbased virtual screening of existing drugs

Ginkgolic acid and anacardic acid are specific covalent inhibitors of SARS-CoV-2 cysteine proteases

Identification of SARS-CoV-2 3CL Protease Inhibitors by a Quantitative High-Throughput Screening

Potent inhibitors of SARS-CoV-2 3 C-like protease derived from N-substituted isatin compounds

Development of a Cell-Based Luciferase Complementation Assay for Identification of SARS-CoV-2 3CL pro Inhibitors

Development of a Fluorescence-Based, High-Throughput SARS-CoV-2 3CL pro Reporter Assay

Discovery of SARS-CoV-2 antiviral drugs through large-scale compound repurposing

chloroquine, montelukast sodium, candesartan, oxytetracycline, and atazanavir are not SARS-CoV-2 main protease inhibitors

High-throughput screening identifies inhibitors of the SARS coronavirus main proteinase

Tracking Changes in SARS-CoV-2 Spike: Evidence that D614G Increases Infectivity of the COVID-19 Virus

mRNA vaccineelicited antibodies to SARS-CoV-2 and circulating variants

Effectiveness of Covid-19 Vaccines against the B.1.617.2 (Delta) Variant

An all-out assault on SARS-CoV-2 replication

Crystal structure of SARS-CoV-2 main protease provides a basis for design of improved α-ketoamide inhibitors

Optimizations of a novel fluorescence polarization-based high-throughput screening assay for β-catenin/LEF1 interaction inhibitors

Both Boceprevir and GC376 efficaciously inhibit SARS-CoV-2 by targeting its main protease

Feline coronavirus drug inhibits the main protease of SARS-CoV-2 and blocks virus replication

PX-12, Tideglusib, and Shikonin Are Nonspecific Promiscuous SARS-CoV-2 Main Protease Inhibitors

Protein-Protein Interactions: Surface Plasmon Resonance

SARS-CoV-2 Mpro inhibitors with antiviral activity in a transgenic mouse model

Sensitive Rapid Fluorescence Polarization Immunoassay for Free Mycophenolic Acid Determination in Human Serum and Plasma

Measurement of specific protease activity utilizing fluorescence polarization

Fluorescence polarization system for rapid COVID-19 diagnosis

Potential pharmacological applications of polyphenolic derivatives from marine brown algae

Dieckol: a brown algal phlorotannin with biological potential

Anti-HIV-1 activity of phlorotannin derivative 8,4‴-dieckol from Korean brown alga Ecklonia cava

Dieckol, a SARS-CoV 3CL pro inhibitor, isolated from the edible brown algae Ecklonia cava

Influenza Virus Neuraminidase Inhibitory Activity of Phlorotannins from the Edible Brown Alga Ecklonia cava

Dieckol and Its Derivatives as Potential Inhibitors of SARS-CoV-2 Spike Protein (UK Strain: VUI 202012/01): A Computational Study

Potential roles of medicinal plants for the treatment of viral diseases focusing on COVID-19: A review

Optimization of expression conditions and determination the proteolytic activity of codon-optimized SARS-CoV-2 main protease in Escherichia coli

Structure and inhibition of the SARS-CoV-2 main protease reveal strategy for developing dual inhibitors against M pro and cathepsin L

Plant natural product plumbagin presents potent inhibitory effect on human cytochrome P450 2J2 enzyme

Discovery of chebulagic acid and punicalagin as novel allosteric inhibitors of SARS-CoV-2 3CL pro

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations

We are grateful to Prof. Haitao Yang and Dr. Ying Lei (Shanghai Institute for Advanced Immunochemical Studies, School of Life Science and Technology, ShanghaiTech University, Shanghai, China) for their kind help in SARS-CoV-2 main protease preparation. We sincerely thank Prof. Yanchang Wang

All data generated or analyzed during this study are included in this article.

Ethics approval and consent to participate Not applicable.

All authors approved for publication.

The authors declare no competing interests.