key: cord-1005616-675lfem3
authors: Kuo, Chih-Jung; Shih, Yan-Ping; Kan, Daphne; Liang, Po-Huang
title: Engineering a novel endopeptidase based on SARS 3CL(pro)
date: 2009-04-25
journal: Biotechniques
DOI: 10.2144/000113303
sha: 8327bcb46447ddd4d0cf38eb1cfd53c690dd728b
doc_id: 1005616
cord_uid: 675lfem3

A 3C-like protease (3CL(pro)) from the severe acute respiratory syndrome–coronavirus (SARS-CoV) is required for viral replication, cleaving the replicase polyproteins at 11 sites with the conserved Gln↓(Ser, Ala, Gly) sequences. In this study, we developed a mutant 3CL(pro) (T25G) with an expanded S1′ space that demonstrates 43.5-fold better k(cat)/K(m) compared with wild-type in cleaving substrates with a larger Met at P1′ and is suitable for tag removal from recombinant fusion proteins. Two vectors for expressing fusion proteins with the T25G recognition site (Ala-Val-Leu-Gln↓Met) in Escherichia coli and yeast were constructed. Identical cloning sites were used in these vectors for parallel cloning. PstI was chosen as a 5′ cloning site because it overlapped the nucleotide sequence encoding the protease site and avoided addition of extra amino acids at the N terminus of recombinant proteins. 3CL(pro) (T25G) was found to have a 3-fold improvement over TEV(pro) in tag cleavage at each respective preferred cleavage site.

Severe acute respiratory syndrome-coronavirus (SARS-CoV) caused an outbreak in 2003 that killed approximately 800 patients worldwide (1) . A 3C-like protease from the virus, 3CL pro , is required to cleave 11 sites of the polyproteins pp1a (486 kDa) and pp1ab (790 kDa) for their maturation (2) . 3CL pro is a chymotrypsin-like protease, but it uses Cys as a nucleophile for catalysis (3) . Analogous to 3C proteases of picornaviruses, 3CL pro has substrate specificity in cleaving the amide bond between P1-Gln and a small amino acid such as Ser, Ala, or Gly at P1′ (4, 5) . As evident in its 3-D structure (6, 7) , this small P1′ residue is near Thr25, which likely determines the substrate specificity.

It was previously demonstrated that the recombinant SARS 3CL pro can undergo auto-processing (7, 8) , which indicates its potential as a tag-cleavage endopeptidase. However, it would need to be capable of cleaving Q↓M, since Met is the most common first residue at protein N-termini. In this study, we replaced the 3CL pro Thr25 with the smaller Gly residue to expand the S1′ site and found that the mutant protease cleaved peptides with larger amino acids such as Met at P1′ with high efficiency. The results presented here demonstrate that Thr25 is essential to determine P1′ substrate specificity and that the T25G mutant can be used as a novel endopeptidase for tag cleavage of recombinant fusion proteins in addition to the commonly used thrombin, Factor Xa (FXa), and tobacco etch virus protease (TEV pro ). Moreover, we have constructed two vectors, using prokaryotic and eukaryotic hosts, which contained the nucleotides encoding the T25G recognition site AVLQ↓M between the tags and the N-terminal Met of the target proteins. In these vectors, PstI (CTGCAG) was chosen as a 5′ cloning site, since its sequence overlapped the nucleotide sequence (GCGGTGCTGCAG) encoding the protease recognition site. Identical 5′-PstI/3′-XhoI cloning sites in these vectors were used to allow sticky-end DNA fragments of the target genes generated by PCR (9) to ligate with these vectors simultaneously in a strategy called parallel cloning (10, 11) . These vectors, in conjunction with the T25G protease, provide new tools for convenient protein production in different hosts and tag cleavage to yield recombinant proteins with authentic sequences.

Expression and purification of mutant 3CL pro Expression and purification of wild-type and mutant SARS 3CL pro in Escherichia coli was accomplished according to reported procedures (12) . T25G and T25S mutants were prepared from the wild-type by using the QuickChange site-directed mutagenesis kit (Cat. no. 200518; Stratagene, La Jolla, CA, USA). C-terminally His-tagged T25G was expressed using pET16b vector (Cat. no. 69662; Novagen, Darmstadt, Germany).

The UPPs-encoding gene (13) was employed as a template for PCR using primers containing the nucleotides encoding the T25G 3CL pro recognition site AVLQ, and the TEV pro recognition site EDLYFQ, respectively. The PCR products were purified from an agarose gel following electrophoresis and cloned into the pET32Xa/Lic vector (Novagen). To serve as a control, the UPPs fusion protein with AAAQ instead of AVLQ was also expressed.

For expressing EGFP fusion proteins in yeast, primers were used to generate a PCR product that was ligated into pHTPY7, which was modified from pPICZαA Engineering a novel endopeptidase based on SARS 3CL pro A 3C-like protease (3CL pro ) from the severe acute respiratory syndromecoronavirus (SARS-CoV) is required for viral replication, cleaving the replicase polyproteins at 11 sites with the conserved Gln↓(Ser, Ala, Gly) sequences. In this study, we developed a mutant 3CL pro (T25G) with an expanded S1′ space that demonstrates 43.5-fold better k cat /K m compared with wild-type in cleaving substrates with a larger Met at P1′ and is suitable for tag removal from recombinant fusion proteins. Two vectors for expressing fusion proteins with the T25G recognition site (Ala-Val-Leu-Gln↓Met) in Escherichia coli and yeast were constructed. Identical cloning sites were used in these vectors for parallel cloning. PstI was chosen as a 5′ cloning site because it overlapped the nucleotide sequence encoding the protease site and avoided addition of extra amino acids at the N terminus of recombinant proteins. 3CL pro (T25G) was found to have a 3-fold improvement over TEV pro in tag cleavage at each respective preferred cleavage site. Substrate specificity and kinetic parameters of the mutant SARS 3CL pro The peptides used as substrates for the T25G protease were synthesized via solid phase, using a 433A peptide synthesizer (Applied Biosystems, Foster City, CA, USA). Each peptide (100 μM) was incubated with 0.1 μM T25G for 1, 2, and 6 h, and the subsequent mixtures were analyzed by HPLC on a C-18 reverse-phase analytic column. Cleavage products were resolved using a 30-min, 2-90% linear gradient of acetonitrile plus 0.1% TFA. The product peak areas were integrated to calculate the reaction rates for each peptide substrate. For K m and k cat measurements, 0.1 μM T25G and 10-200 μM SAVLQ↓MGFRK substrate were used, and the plot of initial rates within 10% substrate consumption versus different substrate concentrations was fitted to the Michaeli-Menten equation using the KaleidaGraph computer program (Synergy Software, Reading, PA, USA).

Design, preparation, and characterization of T25G and T25S 3CL pro Based on the crystal structure of SARS-CoV 3CL pro in complex with a peptide (Protein Data Bank entry 2Q6G; www.rcsb.org/pdb), we have generated a structural model of the protease binding with a modified peptide (Thr-Ser-Ala-Val-Leu-Gln-Met*-Phe-Arg-Lys), where the Ser at P1′ was changed to Met (indicated by the asterisk). We found that Thr25/CG2 of the 3CL pro is within a short distance of 1.32 Å of Met/SD of the peptide (Figure 1 ) as determined by the COOT program (15) . Thus, Thr25 may be replaced by a smaller Gly or Ser (maintaining an -OH group) for better accommodation of Met at P1′.

To test the above hypothesis, T25G and T25S 3CL pro were expressed in E. coli and purified using NiNTA chromatography. Yields were approximately 20 mg/L medium, which were similar to yields from wild-type preparations. T25G, with a C-terminal His-tag, was also prepared for removing the protease using NiNTA after tag cleavage. The enzymatic activities of these protease forms were measured using the fluorogenic substrate Dabcyl-KTSAV-LQSGFRKME-Edans, as described previously (12) . Compared with the activity of wild-type, no significant difference was observed for T25G and C-terminal His-tagged T25G, but T25S showed almost complete loss of activity ( Figure  2A, upper panel) . However, for the peptide substrate SAVLQ↓MGFRK containing Met at P1′, T25G showed significantly higher specific activity than the wild-type (83.5 μM/min versus 6.8 μM/min) ( Figure  2A Short Technical Report min -1 and the K m of 76.6 ± 3.5 μM for the wild-type, the T25G mutant displayed the k cat of 16.2 ± 0.5 min -1 and the K m of 18.6 ± 2.4 μM (43.5-fold higher k cat /K m ) against the SAVLQ↓MGFRK substrate.

Substrate specificity and kinetic parameters of the mutant SARS 3CL pro Next, peptides corresponding to the N-terminal maturation site of SARS 3CL pro with 10 selected variations (Glu, Phe, Gly, His, Lys, Leu, Met, Pro, Ser, and Trp) at P1′ were prepared and used to evaluate the substrate specificity of T25G. As shown in Figure 2B , T25G showed a 12-fold and 8-fold higher activity against the substrates with Met and Leu at P1′, respectively. For the optimal substrate SAVLQ↓SGFRK of the wild-type, T25G mutant showed about equal activity, indicating that T25G still holds the P1′ residue of the small side chain. Similar to the wild-type, T25G did not tolerate peptides with bulky amino acids such as Trp and Phe orcharged amino acids such as Glu and Lys. The peptide with P1′-Pro showed no activity.

Construction of E. coli and yeast vectors to express tag-cleavable fusion proteins by T25G 3CL pro We constructed two vectors for use with E. coli and yeast to express fusion proteins with an AVLQ recognition site to test tag cleavage by T25G. The PstI site CTGCAG, which is part of the AVLQ-encoding sequence GCGGTGCTGCAG, was used as a 5′ cloning site, in conjunction with the 3′ XhoI site, for sticky-end ligation with the PCR product of the target gene (see the strategy illustrated in Figure 3A ). As shown in Figure 3B , the purified 5.4 μΜ fusion UPPs (lane 1) was incubated with 0.1 μM wild-type and two mutant 3CL pro (T25G and T25S), and the final products are shown in lanes 2, 3, and 4, respectively. Only T25G mutant efficiently cleaved the fusion protein, yielding tag-free UPPs (28.3 kDa) and the tags (17.6 kDa) as shown in lane 3. Under these conditions, the tag cleavage reaction was completed <90 min (data not shown). As a control experiment, a UPPs fusion protein with an AAAQ sequence was incubated with the protease, but was not cleaved (data not shown), indicating that T25G specifically recognized the AVLQ cleavage site. Using a yeast Pichia expression system, the EGFP fusion protein with SBD, His-tag, and AVLQ site was overexpressed. SBD was included for the purpose of using starch as an affinity matrix for protein purification, which would lower the associated costs. With 0.1 μM T25G, the cleavage of the fusion protein (5.4 μM) was completed <120 min (data not shown).

Comparison of tag cleavage using TEV protease and T25G 3CL pro Since TEV pro is one of the most commonly used endopeptidases for tag cleavage and shares a similar substrate specificity with SARS 3CL pro , we compared the efficiency of tag cleavage using T25G 3CL pro to that of TEV pro against the E. coli-expressed UPPs fusion proteins containing their preferred recognition sites. Compared with TEV pro , T25G showed a 3-fold higher cleavage rate (0.106 μM/min versus 0.035 μM/min; data not shown). However, compared with that of FXa, another commonly used endopeptidase, the cleavage rate of T25G was 1.7 times lower (0.106 μM/min versus 0.178 μM/min; data not shown). TEV pro generally accepts any amino acid at P1′ except Pro (16) . However, besides Met, T25G prefers small residues that are actually very common N-terminal residues of "native proteins" due to the post-translational action of Met amino peptidase. This suggests a great advantage of using T25G as a novel endopeptidase for tag removal. These engineered vectors and T25G can be assembled as a kit for the maximal production of soluble and functional proteins with authentic sequences.

Characterization and inhibition of SARS-Coronavirus main protease

Comparative full-length genome sequence analysis of 14 SARS coronavirus isolates and common mutations associated with putative origins of infection

Corona-2003. Coronavirus main proteinase (3CL pro ) structure: basis for design of anti-SARS drugs

A consensus sequence for substrate hydrolysis by rhinovirus 3C proteinase

Mechanism and enzymes involved in SARS coronavirus genome expression

The crystal structure of severe acute respiratory syndrome virus main protease and its complex with an inhibitor

Mechanism of the maturation process of SARS-CoV 3CL protease

Production of authentic SARS-CoV M(pro) with enhanced activity: application as a novel tag-cleavage endopeptidase for protein overproduction

Sticky-end PCR: new method for subcloning

Highthroughput screening of soluble recombinant proteins

Parallel gene cloning and protein production in multiple expression systems

Characterization of SARS main protease and inhibitor assay using a fluorogenic substrate

Product distribution and pre-steadystate kinetic analysis of Escherichia coli undecaprenyl pyrophosphate synthase reaction

Crystal structures of the starch-binding domain from Rhizopus oryzae glucoamylase reveal a polysaccharidebinding path

Coot: model-building tools for molecular graphics

The P1′ specificity of tobacco etch virus protease

The authors thank the National Science Council's NRPGM project for financial support.

The authors declare no competing interests.