key: cord-0996547-w2229n4b authors: Nainu, Firzan; Permana, Andi Dian; Djide, Nana Juniarti Natsir; Anjani, Qonita Kurnia; Utami, Rifka Nurul; Rumata, Nur Rahma; Zhang, Jianye; Emran, Talha Bin; Simal-Gandara, Jesus title: Pharmaceutical Approaches on Antimicrobial Resistance: Prospects and Challenges date: 2021-08-14 journal: Antibiotics (Basel) DOI: 10.3390/antibiotics10080981 sha: 7c0fed51cc318e805cf9749dfe5099c28539977a doc_id: 996547 cord_uid: w2229n4b The rapid increase in pathogenic microorganisms with antimicrobial resistant profiles has become a significant public health problem globally. The management of this issue using conventional antimicrobial preparations frequently results in an increase in pathogen resistance and a shortage of effective antimicrobials for future use against the same pathogens. In this review, we discuss the emergence of AMR and argue for the importance of addressing this issue by discovering novel synthetic or naturally occurring antibacterial compounds and providing insights into the application of various drug delivery approaches, delivered through numerous routes, in comparison with conventional delivery systems. In addition, we discuss the effectiveness of these delivery systems in different types of infectious diseases associated with antimicrobial resistance. Finally, future considerations in the development of highly effective antimicrobial delivery systems to combat antimicrobial resistance are presented. The rise of antimicrobial resistance (AMR) has become a significant threat to the global community over recent decades. Generally, AMR is defined as a condition in which microorganisms (bacteria, fungi, viruses, and parasites) can live and grow in the presence of antimicrobial agents that were previously reported to be effective against these microorganisms. In more specific terms, there are several patterns of AMR that have been documented: multidrug-resistant (MDR), extensively drug-resistant (XDR), and pan drug-resistant (PDR). MDR is defined as the acquired resistance of microbe(s) to at least one agent in three or more antimicrobial groups and XDR is defined as microbial resistance to at least one agent in all but two or fewer antimicrobial categories. Lastly, once microbial resistance is developed to agents in all antimicrobial groups, the term PDR is used [1] . MDR-bacteria kill around 700,000 people globally in a year, while 230,000 deaths per year are caused by MDR tuberculosis [2] . In its 2020 Global Report on Tuberculosis, the World Health Organization (WHO) reported that approximately 10.0 million people and other β-lactams, particularly in a form of structural change of the Penicillin-binding protein (PBP). PBP plays a role in the synthesis of peptidoglycan in Gram-positive bacterial cells. Changes in the structure and expression of this protein on the cell surface will affect the effectiveness of -lactam antibiotics [40, 41] . Meanwhile, for antibiotics that target ribosomes, mutations and other changes in the ribosomal subunit will affect drug binding. For example, the erm gene codes for the enzyme responsible for the methylation of the ribosomal subunit, making bacteria resistant to aminoglycosides and macrolides [42, 43] . Resistance can also occur to fluoroquinolones due to changes in the DNA-gyrase and topoisomerase IV enzymes that play a role in DNA synthesis [44] . Changes in enzymes that play a role in folate biosynthesis will also cause resistance to sulfonamide and trimethoprim groups [45] . Another thing to consider is the presence of efflux pumps as a form of bacterial defense against environmental stressors [46] . There are five classes of efflux pumps that are important in the development of bacterial resistance. Three of them are H + -dependent pumps, namely resistance-nodulation-cell division (RND), major facilitator superfamily (MFS), and small multidrug resistance (SMR) [46, 47] . RND is only found in Gram-negative bacteria and is a multi-component pump. In addition, RND acts on many substrates, and can be active against multiple drugs [48] . MFS is involved in the mechanism of resistance to macrolides and tetracyclines [49] . SMR, which is hydrophobic and has few substrates, plays a role in the efflux of β-lactams and some aminoglycosides [50] . There is also a multidrug and toxic compound extrusion (MATE) family that uses Na + as an energy source. MATE is involved in the mechanism of resistance to many fluoroquinolones and several aminoglycosides [51] . Lastly, the ATP-binding cassette transporter (ABC transporter) family is associated with resistance to tetracyclines and fluoroquinolones that can occur in V. cholerae [52] . The discovery of new antibiotic compounds and resistance modifying agents (RMA) has a high urgency in mitigating antimicrobial resistance. Research aimed at this is being carried out extensively all over the world. However, a long process is required before new compounds are given marketing authorization and can be commercialized. Based on data received by the WHO, there are 11 new antibiotics that have been approved for market in the period 2017-2020. Most of these compounds are derivatives of a class of antibiotics with a well-known mechanism of action, including the fluoroquinolones and tetracyclines [10] . Nevertheless, it is important to note that two of the compounds, vaborbactam and lefamulin (Figure 1 ), are listed as new types of antibiotics. There are various types of antibiotics based on their mechanism and target of action. Therefore, there are also various problems related to resistance when it comes to where the antibiotics act. Another type of resistance mechanism is via drug target modification. One example of such resistance mechanism has been documented in the cases of penicillin and other β-lactams, particularly in a form of structural change of the Penicillin-binding protein (PBP). PBP plays a role in the synthesis of peptidoglycan in Gram-positive bacterial cells. Changes in the structure and expression of this protein on the cell surface will affect the effectiveness of -lactam antibiotics [40, 41] . Meanwhile, for antibiotics that target ribosomes, mutations and other changes in the ribosomal subunit will affect drug binding. For example, the erm gene codes for the enzyme responsible for the methylation of the ribosomal subunit, making bacteria resistant to aminoglycosides and macrolides [42, 43] . Resistance can also occur to fluoroquinolones due to changes in the DNA-gyrase and topoisomerase IV enzymes that play a role in DNA synthesis [44] . Changes in enzymes that play a role in folate biosynthesis will also cause resistance to sulfonamide and trimethoprim groups [45] . Another thing to consider is the presence of efflux pumps as a form of bacterial defense against environmental stressors [46] . There are five classes of efflux pumps that are important in the development of bacterial resistance. Three of them are H + -dependent pumps, namely resistance-nodulation-cell division (RND), major facilitator superfamily (MFS), and small multidrug resistance (SMR) [46, 47] . RND is only found in Gram-negative bacteria and is a multi-component pump. In addition, RND acts on many substrates, and can be active against multiple drugs [48] . MFS is involved in the mechanism of resistance to macrolides and tetracyclines [49] . SMR, which is hydrophobic and has few substrates, plays a role in the efflux of β-lactams and some aminoglycosides [50] . There is also a multidrug and toxic compound extrusion (MATE) family that uses Na + as an energy source. MATE is involved in the mechanism of resistance to many fluoroquinolones and several aminoglycosides [51] . Lastly, the ATP-binding cassette transporter (ABC transporter) family is associated with resistance to tetracyclines and fluoroquinolones that can occur in V. cholerae [52] . The discovery of new antibiotic compounds and resistance modifying agents (RMA) has a high urgency in mitigating antimicrobial resistance. Research aimed at this is being carried out extensively all over the world. However, a long process is required before new compounds are given marketing authorization and can be commercialized. Based on data received by the WHO, there are 11 new antibiotics that have been approved for market in the period 2017-2020. Most of these compounds are derivatives of a class of antibiotics with a well-known mechanism of action, including the fluoroquinolones and tetracyclines [10] . Nevertheless, it is important to note that two of the compounds, vaborbactam and lefamulin (Figure 1 ), are listed as new types of antibiotics. Vaborbactam, a beta-lactamase inhibitor, has been used clinically for the treatment of complicated urinary tract infections (cUTI) in combination with meropenem. Vaborbactam has good inhibitory activity against serine beta-lactamases, including Klebsiella pneumoniae carbapenemase (KPC). Currently, therapy using meropenem-vaborbactam is only given parenterally at a 1:1 ratio. Reported clinical data so far indicate this drug combination is well tolerated and effective against resistant bacteria [53] . Meanwhile, another drug known as lefamulin, is a new class of pleuromutilin antibiotics. Its mechanism of action is achieved through the alteration of protein synthesis on the ribosomes of bacterial cells. Clinical data show comparable effectiveness with fluoroquinolones in the treatment of community acquired pneumonia (CAP) [54, 55] . The complete list of the eleven drugs that have been commercialized and have received U.S Food and Drug Administration (US FDA) and European Medicines Agency (EMA) approval since 2017 can be seen in Table 1 . Due to the prediction that problems related to AMR will continue to increase from year to year, the search for new antimicrobials continues. Scientists from all parts of the world are working hard on the discovery of compounds to overcome AMR. The WHO has listed several types of microorganisms as priority targets and special attention has been given to them. In the latest WHO report on antibacterial agents in clinical and preclinical development, the discovery of new antibiotic compounds under clinical testing is categorized into two groups, namely traditional antibiotics and non-traditional antibiotics. The clinical trial is a crucial stage to ensure the efficacy and safety of new drug compounds before they are marketed. Clinical studies on a substance consists of four phases, of which three phases must be completed before the agent can be commercialized. A summary of the phases of clinical trial according to the WHO can be seen in Figure 2 . Antibiotics 2021, 10, 981 6 of 33 been given to them. In the latest WHO report on antibacterial agents in clinical and preclinical development, the discovery of new antibiotic compounds under clinical testing is categorized into two groups, namely traditional antibiotics and non-traditional antibiotics. The clinical trial is a crucial stage to ensure the efficacy and safety of new drug compounds before they are marketed. Clinical studies on a substance consists of four phases, of which three phases must be completed before the agent can be commercialized. A summary of the phases of clinical trial according to the WHO can be seen in Figure 2 . The term traditional antibiotics refers to classes of antibiotics that are commonly used and whose mechanism of action is well known. There are 26 new traditional antibiotic compounds under clinical development that are reported to have activity against WHO priority pathogens. The WHO priority pathogen list is further divided into three categories, namely critical, high, and medium (Table 2 ). WHO has also set four criteria for innovation in new drug discovery, including: (1) no cross-resistance with other antibiotics, (2) new chemical class(es), (3) new target(s), and (4) new mechanism of action(s). Of the 26 compounds, only seven of them fulfill at least one of these criteria. Below, we will discuss antibiotics currently in clinical testing by their classes. The term traditional antibiotics refers to classes of antibiotics that are commonly used and whose mechanism of action is well known. There are 26 new traditional antibiotic compounds under clinical development that are reported to have activity against WHO priority pathogens. The WHO priority pathogen list is further divided into three categories, namely critical, high, and medium (Table 2 ). WHO has also set four criteria for innovation in new drug discovery, including: (1) no cross-resistance with other antibiotics, (2) new chemical class(es), (3) new target(s), and (4) new mechanism of action(s). Of the 26 compounds, only seven of them fulfill at least one of these criteria. Below, we will discuss antibiotics currently in clinical testing by their classes. Beta-lactams, or β-lactams, are the largest and most widely prescribed class of antibiotics, consisting of penicillin, cephalosporin, carbapenem, and monobactam derivatives [71] . As previously explained, the mechanism of resistance to this class of drugs is the production of the enzyme beta-lactamase by microorganisms. This enzyme can hydrolyze the beta-lactam ring, rendering the drug inactive [32, 71] . One strategy to overcome AMR in beta-lactam drugs is a combination with beta-lactamase inhibitor (BLI) compounds. Currently, several drugs belonging to the beta-lactam/beta-lactamase inhibitor class are under clinical testing [32, 72] . Two of them are single beta-lactams, namely sulopenem and benapenem. Sulopenem, a thiopenem derivative, is a drug that has been described since 1989, but development was discontinued in the 1990s. Due to the urgent need for drugs capable of inhibiting Gram-negative bacteria, studies regarding these drugs have been reopened. Sulopenem is currently in phase 3 clinical trials for its intravenous preparation and oral prodrug form, sulopenem-etzadroxil. This drug is reported to have good activity against extendedspectrum beta-lactamases (ESBL)-producing bacteria [73, 74] . Benapenem is a carbapenem derivative that has only been clinically developed in China. This drug has now completed phase 2 clinical trials. Cross-resistance with other carbapenem drugs is reported [75] . Beta-lactamase inhibitors (BLIs), currently in clinical trials, are divided into several classes, including boron-based BLI; diazabicyclooctanes; and penicillin-based sulfones [76] . Most of these compounds are only active against serine β-lactamases (class A, C, and D), but only a few have activity against metallo β-lactamases (class B). Almost all diazabicylooctanes-derived BLIs have intrinsic antimicrobial activity due to their ability to inhibit PBP2 [72] . A sulbactam-durloactam combination is currently in phase 3 clinical trials for infections caused by carbapenem-resistant Acinetobacter baumannii (CRAB). Sulbactam is known to have intrinsic activity against A. baumannii. However, due to the variety of beta-lactamase enzymes produced by this resistant species, its antibacterial potential is limited. Durloactam is a BLI with a broad spectrum of beta-lactamase classes A, C, and D, so it can support the activity of sulbactam. In vitro studies showed much lower resistance of A. baumannii to this combination when compared to amikacin, ampicillin-sulbactam, meropenem, and cefoperazone-sulbactam [77, 78] . Three BLIs are being clinically developed in combination with cefepime, namely taniborbactam and enmetazobactam (phase 3), and zidebactam (phase 1). Cefepime-taniborbactam and cefepime-enmetazobactam were studied for the treatment of cUTI. Meanwhile, zidebactam has activity against A. baumannii, P. aeruginosa, and several Enterobacterales. Other BLIs include nacubactam (with meropenem), ETX0282 (with cefpodoxime), VNRX-7145 (with ceftibuten), ARX-1796, and QPX7728 (with an undisclosed β-lactam QPX2014) ( Figure 3 ). Tetracyclines are broad-spectrum antibiotics that work by inhibiting bacterial protein synthesis. The mechanism of resistance to tetracycline can be achieved through three main mechanisms, namely ribosomal protection, drug efflux, and enzymatic inactivation [79] . The discovery of synthetic and semisynthetic tetracycline derivatives by chemical modification in the last few decades demonstrates the potential of this class to be explored as a treatment for AMR. Tigecycline, approved for clinical use since 2005, is a parenteral semisynthetic glycycline that has been reported to have good activity against several resistant microorganisms. Two other tetracycline derivatives have also recently received approval, namely eravacycline and omadacycline for oral and intravenous use. Meanwhile, three tetracycline derivatives were recorded in phase 1 of clinical trials, namely KBP-7072, TP-271, and TP-6076. TP-271 and TP-6076 are synthesized by Tetraphase Pharmaceuticals. TP-271 is reported to be susceptible to tet (A) and tet (X), tetracycline-inactivating enzymes. TP-6076 has a slightly different chemical structure from other tetracycline derivatives and has activity against carbapenem-resistant Enterobacteriaceae (CRE) and CRAB [80] . Antibiotics 2021, 10, 981 8 of 34 Tetracyclines are broad-spectrum antibiotics that work by inhibiting bacterial protein synthesis. The mechanism of resistance to tetracycline can be achieved through three main mechanisms, namely ribosomal protection, drug efflux, and enzymatic inactivation [79] . The discovery of synthetic and semisynthetic tetracycline derivatives by chemical modification in the last few decades demonstrates the potential of this class to be explored as a treatment for AMR. Tigecycline, approved for clinical use since 2005, is a parenteral semisynthetic glycycline that has been reported to have good activity against several resistant microorganisms. Two other tetracycline derivatives have also recently received approval, namely eravacycline and omadacycline for oral and intravenous use. Meanwhile, three tetracycline derivatives were recorded in phase 1 of clinical trials, namely KBP-7072, TP-271, and TP-6076. TP-271 and TP-6076 are synthesized by Tetraphase Pharmaceuticals. TP-271 is reported to be susceptible to tet (A) and tet (X), tetracycline-inactivating enzymes. TP-6076 has a slightly different chemical structure from other tetracycline derivatives and has activity against carbapenem-resistant Enterobacteriaceae (CRE) and CRAB [80] . Just like tetracycline, aminoglycoside antibiotics also work by inhibiting protein synthesis in bacterial cells. However, over time, resistance also occurs to this class of antibiotics. Resistance to aminoglycosides is caused by the production of aminoglycoside-modifying enzymes (AMEs) and bacterial ribosome-modifying enzymes (16S rRNA methylase). Plazomicin (Figure 4) , a newly approved drug, is stable in the presence of many types of AME, but is susceptible to 16S rRNA methylase [81] . In addition, the classic problems associated with the use of aminoglycosides, such as nephrotoxicity and ototoxicity, are still encountered with these drugs [79] . EBL-10031 (apramycin), an aminoglycoside previously used only for veterinary purposes, is currently in phase 1 clinical trials. Due to its unique chemical structure, it is resistant to a variety of clinically relevant AMEs, even to RNA methyltransferase, reducing its resistance [82] . In addition, this drug is also reported to have lower toxicity than other aminoglycosides [83] . Just like tetracycline, aminoglycoside antibiotics also work by inhibiting protein synthesis in bacterial cells. However, over time, resistance also occurs to this class of antibiotics. Resistance to aminoglycosides is caused by the production of aminoglycoside-modifying enzymes (AMEs) and bacterial ribosome-modifying enzymes (16S rRNA methylase). Plazomicin ( Figure 4 ), a newly approved drug, is stable in the presence of many types of AME, but is susceptible to 16S rRNA methylase [81] . In addition, the classic problems associated with the use of aminoglycosides, such as nephrotoxicity and ototoxicity, are still encountered with these drugs [79] . EBL-10031 (apramycin), an aminoglycoside previously used only for veterinary purposes, is currently in phase 1 clinical trials. Due to its unique chemical structure, it is resistant to a variety of clinically relevant AMEs, even to RNA methyltransferase, reducing its resistance [82] . In addition, this drug is also reported to have lower toxicity than other aminoglycosides [83] . Macrolides have bacteriostatic activity through inhibition of protein synthesis at the 50S ribosomal subunit. The most common mechanism for the occurrence of resistance in macrolides is RNA methylation reaction that changes the structure of the drug binding site on the ribosome [84] . A fourth-generation macrolide, solithromycin, has good activity against resistant microbes, especially when compared to the previous generation macrolides. Two phase III clinical trials for CAP and one for gonorrhea have been completed for Macrolides have bacteriostatic activity through inhibition of protein synthesis at the 50S ribosomal subunit. The most common mechanism for the occurrence of resistance Antibiotics 2021, 10, 981 9 of 33 in macrolides is RNA methylation reaction that changes the structure of the drug binding site on the ribosome [84] . A fourth-generation macrolide, solithromycin, has good activity against resistant microbes, especially when compared to the previous generation macrolides. Two phase III clinical trials for CAP and one for gonorrhea have been completed for this drug [85, 86] . However, this drug did not get approval from the US FDA because of its worrisome side effects on the liver [87] . Nafithromycin, a ketolide derivative, has shown good susceptibility to CABP-causing bacteria, and is now entering phase 3 clinical trials [88] . Fluoroquinolones are part of this class of antibiotics that are widely used. However, two new topoisomerase II inhibitor compounds have been developed which have distinct structures to that of fluoroquinolones. Additionally, they act on different drug binding sites so that resistance-related issues can be overcome. Zoliflodacin is currently in a phase 3 clinical trial for uncomplicated gonorrhea [89] . Meanwhile, gepotidacin is being developed for uncomplicated UTI and uncomplicated gonorrhea [90] . The development of antimicrobial compounds with new mechanisms of action is considered important in overcoming AMR. Some of these classes include bacterial enoyl-ACP reductase (FabI) inhibitors and the filamenting temperature-sensitive mutant Z (FtsZ) inhibitors. FabI is an enzyme that plays an important role in the final stages of fatty acid biosynthesis in bacteria cells. Afabicin, administered intravenously (i.v.) and orally, is a FabI inhibitor currently under phase 2 clinical trials for acute bacterial skin and skin structure infections (ABSSSI) and bone and joint infections. This drug acts specifically on Staphylococci and has no activity against other microorganisms [91] . Meanwhile, FtsZ inhibitors offer a new mechanism of action especially in overcoming AMR because of their ability to target FtsZ proteins that are vital in bacterial cell division. A prodrug of TXA-707, TXA-709, is currently in clinical trials. This drug has good activity against methicillin-resistant S. aureus (MRSA) [92] . The following section will discuss the development of several novel AMR agents and the demonstration of their effectiveness, at least in vitro. This section will be divided into two topics: natural antimicrobial agents and synthetic antimicrobial agents. The history of antibiotic discovery began from nature. In fact, the first antibiotic agent was discovered from a living organism. After that, the golden age of antibiotic discovery lasted 20 years, with most of the compounds being derived from natural resources [16] . Even now, natural antimicrobials still attract attention, either as an antibiotic candidates or template molecules for synthetic antimicrobials. This section will discuss the development of natural antimicrobial agents over the last few years. Antimicrobial peptides, small proteins with diverse biological activities, are considered one of the most dominant antimicrobial candidates in this current pipeline. Around 4500 sequences of AMPs are stored in the Data Repository of Antimicrobial Peptides (DRAMP) [93] . Although most antimicrobial peptides are currently obtained through synthesis, antimicrobial peptides can also be isolated from microorganisms, animals, and plants [94] . Bacteriocin-ribosomal AMPs synthesized by bacteria-is one of the most well-known AMPs and is widely used as a food preservative for a long time [95] . A recent discussion by Soltani et al. (2021) presented the potential of bacteriocin not only in food applications but also in the medical field; however, the safety and toxicity of bacteriocin became the highlight of the discussion [96] . Insufficient data regarding the safety and toxicity of bacteriocin will limit its broad use in industrial settings; therefore, further research about these matters is suggested [96] . Another example of natural AMPs is TPDSEAL, plant AMPs isolated from Porphyra yezoensis seaweed, showing bactericidal activity against S. aureus [97] . In addition to more AMPs sources, insects can be utilized to source novel AMPs with antibacterial and antifungal effects [98] . Lubelicin isolated from bovine rumen could kill MRSA strains after 30 min of exposure and had low cytotoxicity [99] . Several problems like stability, degradation by oxidation or proteolytic enzymes, relatively low half-life, toxicity, and hemolytic activity compared to antibiotics become significant obstacles in translating natural-derived AMPs to industrial settings [95, 100] . However, the utilization of bioengineering techniques to produce more stable AMP-like compounds (e.g., peptidomimetics, which will be discussed later in this review) might offer an alternative solution to this problem. Since the finding of the first antibiotics by Fleming in 1928, microorganisms have become one of the most exploited sources in the discovery of new antimicrobial compounds. Taking one example of natural antibiotics, polymyxin E, also known as colistin, is still favorable as an antimicrobial therapy for drug-resistant microorganisms in the clinic [101] . Though there are plenty of resources being funneled into finding new antimicrobial agents, filamentous saprophytic microbes living in diverse environments, famously known as Actinomycetes, are still popular, even nowadays. An example of recent findings of a novel antimicrobial compound from Actinomycetes is RSP 01, a lactone-based compound isolated from Streptomyces sp. RAB12 demonstrates a minimum inhibitory concentration (MIC) value ten times more potent than actinomycin-D against C. albicans, in addition to its antibacterial activity [102] . Although the main focus of antibiotic discovery in this current pipeline is still of nonextreme habitats of rare Actinomycetes, some researchers believe extreme conditions will be favorable to find more diversity in Actinomycetes and its unique metabolites. Several antimicrobial agents and other biologically active compounds sought from Actinomycetes have been discussed in many papers over the recent decades [103] [104] [105] [106] [107] . Those findings still consider Actinomycetes to be one of the largest producers of antimicrobial compounds. Currently, there is a shift of interest to rare Actinomycetes, especially the ones sought from various extreme environments like marine [108, 109] , thermophilic areas [110] , desert [111, 112] , extreme cold habitats [113] , and other harsh conditions [114] to expand the diversity of the unique metabolites obtained. Taking one example, Anthracimycin-a novel compound sought from marine Actinomycetes-showed potent bactericidal action against MRSA and B. anthracis as well as protective effects in animal models infected with MRSA [115, 116] . Actinomycetes may remain a source of novel antimicrobial compounds in the coming years. In recent years, searching for new antimicrobial compounds from medicinal plants has remained a trend among researchers due to the diversity of secondary metabolites. Medicinal plants can be utilized as herbs, extracts, or plant-derived compounds. For example, a research report on plant extracts of Moringa oleifera and Matricaria recutita implied their potential to prevent the growth of clinical isolates of MDR, XDR, and PDRbacteria with MIC value range of around 7.8-62.5 mg/mL [117] . Another plant-based compound that is studied the most is curcumin. This phenolic compound exhibits a broad biological spectrum and various pharmacological effects such as anti-infective agent. In fact, curcumin exhibits activity against numerous bacteria, fungi, and viruses [118] . Recent reports on the activity of curcumin have shown that this compound displays a selective activity; its sensitivity was observed to be greater against Gram-positive than Gram-negative bacteria [119] . The same study reported the activity of curcumin against AMR bacteria and fungi; even though the results was not so promising [119] . Synergistic interaction of extract or plant-based compounds and antibiotics to repurpose resistant antimicrobial drugs has also become a huge trend; several compounds were reported to have synergistic action when combined with antibiotics [120] [121] [122] [123] . As discussed by Cheesman et al. (2017) , this approach might be an excellent strategy to tackle AMR, mainly since the product development and testing of plant-based agents (specifically plant extracts) does not require a large amount of money, meaning that its delivery to the market can be accelerated [124] . Bacteriophages (BPs) are DNA/RNA viruses with capsid-enveloped structures capable of infecting and killing bacteria [125] . Bacteriophages can be used as carriers in the treatment of AMR because of their ability to kill bacteria precisely without killing commensal bacteria in the body, as well as carriers for agents that can target the regulation of genes that play a role in the growth and/or survival of the target bacteria [126] . In addition, BPs are inexpensive, have higher safety and tolerability, and are easy to administer with effects limited to the infected area [125, 127] . The efficacy of BPs as antimicrobial agents has been demonstrated in various studies. Alemayehu et al. (2012) reported that two BPs (ϕMR299-2 and ϕNH-4) isolated from wastewater treatment were able to kill clinical isolates of P. aeruginosa, including in its biofilm form in lung cell lines [128] . Drilling et al. (2014) reported similar results on the use of BPs in reducing biofilms of clinical isolates of S. aureus in rhinosinusitis patients [129] . In addition to single use, the combination of BPs and antibiotics has also been reported to show increased activity in several studies [128, 130, 131] where the efficacy is highly dependent on the type of antibiotic given, the administration order, and the target bacteria. The relationship between effectiveness and BPs is one of the exciting things to note, as exemplified in the study conducted by Dickey and Perrot [130] , where the use of BPs before antibiotics affects the pathogen but is otherwise ineffective. Challenges in developing BPs as antimicrobial therapy are also covered in various studies, ranging from the host range to the clearance of BPs by the immune system. Although it is one of the advantages of BPs, the specificity of action of BPs also limits their use in clinical practice [125] ; the type of bacteria that infects the host must be known before administering BPs [126] . These challenges can be overcome by providing cocktails containing various BPs or using phage engineering to expand the host range of BPs [126] . Phage engineering using clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein (Cas) can also maximize efficacy by targeting the pathogen's resistant genes or virulent genes and reducing the immune response against bacteriophages [126] . Another problem is the contribution of bacteriophages in spreading antimicrobial resistance genes (ARGs), which has been proven by the discovery of resistant genes in BPs in several studies [125, 132, 133] . However, the prevalence of ARG transduction is relatively low, and there are indications of an overestimation of ARG abundance [125] . Another issue of BP utilization is the possibility of developing resistance to BP target bacteria; however, replacing BPs with other types can be a solution to this problem [134] . Chemical synthesis plays an essential role in the early stages of antibiotic development; sulfonamides are one of the most widely used examples of synthetic antibacterials in clinical practice. Over time, the synthesis of antimicrobial agents has progressed. Chemical synthesis is not only used to produce antimicrobial agents from scratch (fully synthetic antimicrobial agents) but also to improve the chemical characteristics of antimicrobial agents obtained from natural materials (semi-synthetic antimicrobial agents) [135] . Synthetic biology using genetic engineering techniques gives enormous benefits in developing novel antimicrobial compounds, resulting in the rapid growth of this research field [95] . This section will discuss the development of synthetic antimicrobial agents over the last few years. Several novel potential fully synthetic antimicrobial compounds have been reported over recent decades. Salina et al. (2014) synthesized novel 2-thiopyridines compounds, which were effective against both active and in vitro dormant models of M. tuberculosis (MTB) cells [136] . The results showed that all compounds were active against the tested cells-the most significant activity was observed in compound 11026115, which killed dormant MTB H37Rv in three different in vitro models with MIC 0.250 mc/mL [136] . Recently, Seethaler et al. (2019) reported their successful attempt to generate two novel thienocarbazole compounds with antimicrobial activity towards S. aureus and Enterococcus species [137] . The lowest MICs were 2 mcg/mL against S. aureus and 8 mg/mL against Enterococcus in vitro. Both compounds also demonstrated their effectiveness in reducing the survival rate of S. aureus and Enterococci species upon in vivo testing using the Galleria mellonella infection model [137] . Other chemical compounds, novel urea derivatives, were created using one-step amine reactions using thiocyanates in toluene [138] . The compounds were tested on Enterococcus faecium, S. aureus, K. pneumoniae, A. baumannii, P. aeruginosa, and Enterobacter species (ESKAPE bacteria) and two fungi (C. albicans and C. neoformans). Several compounds showed moderate to excellent activities against A. baumannii, K. pneumonia, S. aureus, and fungi C. neoformans, while moderate to poor activities were found in E. coli, P. aeruginosa, and C. albicans, indicating their prospective use as new antibiotic candidates, especially towards A. baumannii with the highest inhibition percentage of 94.5% [138] . The mechanisms of these compounds were yet to be determined. Babii et al. (2018) successfully created CICI-flav-a novel tricyclic flavonoid compound-through a two-step-reaction using 5-bromo-2-hydroxphenacyl-N-Ndiethyldithiocarbamate as the starting molecule [139] . This compound exhibits bactericidal activity against both Gram-positive and Gram-negative bacteria, as well as antibiofilm activity [139] . Its mechanism of action is related to the disruption of cell membrane integrity. A toxicity assay on Vero cells showed no or very low toxicity at effective concentrations [139] . Capracazamycins (CPZs) A-G are an example of incorporating semi-synthetic techniques to improve the physical characteristics of an antimicrobial agent. Caprazamycin B (CPZ-B) is a potent anti-tuberculosis drug. However, its poor solubility and the difficulty in separating the compound from a complex mixture become considerable obstacles in its development [140] . Takahashi et al. (2013) modified the caprazene (CPZEN) obtained from the CPZs fermentation media through acid treatment to produce novel CPZs compounds. These compounds reported good solubility in water and better activity against M. tuberculosis than the original CPZ-B [140] . Among all synthetic agents, major compounds studied are peptidomimetics-small molecules designed to mimic the biological activity or characteristics of a peptide. Peptidomimetics often possess improved bioavailability and metabolic stability while retaining activity and selectivity profiles resembling AMPs [93, 141] . The most fundamental difference from peptidomimetics is the lack of an α-amino acid from its backbone structure [141] . One of the most studied peptidomimetics is ceragenins-a group of peptidomimetics derived from bile acid and cholic acid. Ceragenins has protease-resistant properties since it is not protein-based and selectively targets the bacterial cytoplasmic membrane. The main advantages of ceragenins are their activity against microorganisms resistant to high levels of antibiotics and their ease of preparation for large-scale production [142] . The most-reported first-generation ceragenin was CSA-13. Several studies demonstrated that this compound had no or low toxicity; therefore, it was deemed suitable as a new antibiotic candidate for humans [142] . In the study conducted by Bozkurt-Guzel et al. (2014), CSA-13 showed synergistic interaction against clinical isolates of CRAB with colistin, tobramycin, and ciprofloxacin with the highest synergistic effect shown when combined with colistin (55% of tested strain, n = 20) [143] . A comparative study about the antimicrobial activity of first-generation ceragenins and second-generation ceragenins (CSA-142 and CSA -192) showed CSA-13 was still more potent than the second-generation MIC90. However, secondgeneration ceragenins showed better results in the time-killing assay as they showed earlier time points than the first-generation ceragenins [144] . Even though CSA-13 shows better activity than CSA-142 and CSA-192, second-generation ceragenins might be more beneficial than the first-generation due to better stability, environmentally friendly, and easier preparation [144] . Another second-generation ceragenins-CSA-131-exhibited bactericidal and excellent antibiofilm properties against P. aeruginosa [145] and S. maltophilia [146] as well as a synergistic activity when combined with colistin against CRAB [147] . Endolysins (lytic endopeptidases) are bacteriophage-derived hydrolases that caused the osmolysis of Gram-positive bacteria by degrading the peptidoglycan of bacterial cell walls [148, 149] . During the lysogenic cycle, the virus will inject its genome into the bacterial genome as a prophage. Under stress conditions, this gene will enter the replication state to start the lysis cycle [149] . This compound was reported for the first time by Frederick Tworth in 1915; several endolysins have entered the clinical trial phase over the last decade [149] [150] [151] [152] . Endolysin has become an attractive alternative for antimicrobial agents because its activity remains when administered exogenously. Most endolysins are active against Gram-positive bacteria and can cause rapid cell lysis and death because these bacteria lack outer membrane protection [148, 149] . Endolysins targeting Gram-positive bacteria tend to have a narrow spectrum, while endolysins targeting Gram-negative bacteria tend to have a broad spectrum. The main advantage of endolysin is that it is a safer molecule because it does not interact with the host, unlike bacteriophages which may mutate or be annihilated by the host's immune system [149] . Recombinant endolysin can be synthesized by cloning prophage DNA that encodes the production of endolysin in bacteria. LysBC17, a recombinant endolysin prophage derived from the genome of B. cereus strain Bc17, was reported to have narrow-spectrum lytic activity against several Bacillus strains [153] . Swift et al. reported similar activity in PlyCP10 and PlyCP41 endolysins obtained from the genome of Bacillus bacteria [154] . LysPA26 and LysAB54-Gram-negative endolysins-demonstrate good antibacterial activity against Gram-negative superbugs such as MDR P. aeruginosa, A. baumannii, and E. coli [155, 156] . Moreover, endolysin LysPA26 was reported to kill P. aeruginosa even in the form of a biofilm. Another endolysin, LysSAP26, exhibits broad-spectrum activity against resistant ESKAPE bacteria with MIC ranging from 5-80 mcg/mL [155] . Drug delivery becomes a drawback in the use of endolysin in therapy. As reviewed by Murray et al. (2021) , endolysin modification using molecular biology techniques (e.g., chimeric lysin, artilysin, virion-associated lysin, etc.) combined with optimization of delivery systems may solve this problem in the future [149] . Nanoparticles (NPs) are tiny, nano-sized particles with various biological, including antimicrobial, activities. Although their exact mechanisms are not exactly understood, NPs and NP-based materials still invite interest to be developed as antimicrobial agents [157] . Advantages such as simple preparation, excellent and varied antimicrobial activities, and its ability to be used as a carrier for antibiotic delivery are the reasons for the popularity of this material [157, 158] . Nanoparticles, in particular, metal nanoparticles, can be prepared by using conventional chemical techniques or green synthesis techniques with the help of bacteria, fungi, and plants. The green synthesis of nanoparticles has attracted vast attention due to its ease of preparation, environmentally friendly nature, and costeffectiveness [159] . Several antimicrobial actions of metal-based nanoparticles have been documented over the past few years, ranging from their ability to inhibit the growth of resistant bacteria, antibiofilm activity, inhibit quorum sensing activity, to act synergistically with antibiotics [157, 158, 160] . Among the metal nanoparticles developed, silver nanoparti-cles (AgNPs) are the most potent metal-based nanoparticles [160] . One example of AgNPs activity-antibacterial and quorum QQ activity against K. pneumoniae-was demonstrated by Indian researchers [161] . AgNPs also displayed antifungal activity against several fungi such as C. albicans [162] , Malassezia furfur [163] , and several fungal pathogens [164] [165] [166] . When combined with visible blue light therapy, the antimicrobial activity of AgNPs therapy increased at sub-mic concentrations and the best activity was shown when these agents were combined with antibiotics [167] . Although NPs and NP-based materials show promising characteristics and activities as antimicrobial candidates, several challenges need to be addressed upon introducing these agents in the clinic. Cytotoxicity occurs as a problem in therapy with AgNPs; local administration of NPs can overcome this problem [168] . Before utilizing NPs in treatment, host-NPs interaction, optimal dose, and administration routes must be assessed [160] . Another arising problem is the growing prevalence of bacterial resistance towards NPs, including A. baumannii, one of the most concerning AMR bacteria in the clinic [169] . New strategies are urgently required to preserve the efficacy of NP-based materials as antimicrobial agents, including proper use and disposal of such preparations and a better understanding of the mechanism of microbial resistance against NP-based pharmaceuticals. The fast occurrence of antimicrobial resistance in pathogenic microorganisms has become an impending worldwide public health problem. Management with conventional antimicrobial agents frequently results in resistance increase because most of these antimicrobial agents work on intracellular targets. Moreover, the application of these agents does not keep their bacterial morphology intact. Consequently, they are extremely prone to advance resistance throughout mutation. Bacterial resistance problems have occurred in different parts of the body. Accordingly, several drug delivery systems have been discovered with various routes to deliver antimicrobial agents to overcome this resistance issue [170] [171] [172] [173] [174] [175] [176] [177] [178] . Oral administration has been known as the safest and most convenient route for any medication, especially for antimicrobials. The oral route is preferable for antibiotic treatment over the intravenous route due to several advantages, such as being cheap, easy to administer, and not requiring any healthcare professional intervention due to the absence of a needle during the treatment [179, 180] . Oral antibiotics can be considered the first option to treat any non-emergency condition over other routes if the bioavailability is over 90% compared to the intravenous route [180] . Therefore, bioavailability becomes a significant concern for the scientist in designing and developing antibiotic formulations for oral administration. Poor bioavailability may result in resistance development when the antibiotics fail to achieve the adequate serum concentration required to kill the bacteria [181] . Low aqueous solubility and limited permeability are reported to become the main factors associated with poor bioavailability [181, 182] . In order to enhance the low solubility of amoxicillin and levofloxacin, Ojha and Das developed a drug-loaded microbial biopolymeric nanocarrier. This system was developed using a microbial polyester, poly (3-hydroxybutyrat-co-3-hydroxyvalerate), to improve the curative antimicrobial bioavailability of both amoxicillin and levofloxacin. In this study, the formulations were prepared by utilizing a triple emulsion technique. The size of particles was found to be in a range of 5-100 nm, and a biocompatibility study showed that these nanoparticles are biocompatible and safe from cytotoxic effects. Based on the antibacterial activity against E. coli and S. aureus, an increment of nanoparticle concentration results in an increase in the inhibition zone as well as a significant decrease in the bacterial survival ratio [182] . An alternative way to increase the solubility of antibiotics is to form an inclusion complex with cyclodextrin. In a recent study, various antibiotics, such as kanamycin, chloramphenicol, gentamicin, and ampicillin, were individually formulated into nanofibers for oral delivery systems by utilizing the electrospinning technique [183] . The diameter of antibacterial nanofibers obtained was found to be in the range of 340 to 550 nm. All the solidstate characterization confirmed the inclusion complex formation between cyclodextrin and antibiotics (kanamycin, chloramphenicol, gentamicin, and ampicillin). Notably, the inclusion complexes of antibiotics in nanofiber particles demonstrated a rapid dissolution and release in water and artificial saliva. The antibacterial activity of cyclodextrin-antibiotic nanofiber was explored for 24 h using a zone-of-inhibition study performed on agar plates. The results showed that the inclusion complex nanofiber exhibited high bacterial activity against E. coli, whilst no inhibition zones were observed from each antibiotic's control [183] . The scanning electron microscope (SEM) images of cyclodextrin-antibiotic nanofibers obtained by Topuz et al. (2021) is presented in Figure 5A . [183] . Reprinted with permission from ref. [183] . Copyright 2020 Elsevier Inc. (B) Microscopic images of tissue histology after treatment with a self-emulsifying drug delivery system (SEDDS) in the intestine [184] . Reprinted with permission from ref. [184] . Copyright 2021 Elsevier Inc. (C) SEM images of encapsulated phage [185] . Reprinted with permission from Kerry and Danish (2021). Copyright 2021 Kerry and Danish. In order to improve drug permeability, a self-emulsifying drug delivery system (SEDDS) has been documented by Arshad et al. (2021) . This system has been investigated to enhance muco-penetration of ciprofloxacin. As a cell-penetrating peptide, poly-L-lysine was incorporated into the SEDDS of ciprofloxacin to enhance the system selectivity of the intracellular target of the Salmonella enterica serovar Typhi infection reservoir. This study showed that the SEDDS formulation was able to release 85% of ciprofloxacin in 72 h. An antimicrobial study showed that ciprofloxacin loaded in a SEDDS of poly-L-lysine, mannose, preactivated hyaluronic acid, and Pluronic F127 could minimize the survival rate of [183] . Reprinted with permission from ref. [183] . Copyright 2020 Elsevier Inc. (B) Microscopic images of tissue histology after treatment with a self-emulsifying drug delivery system (SEDDS) in the intestine [184] . Reprinted with permission from ref. [184] . Copyright 2021 Elsevier Inc. (C) SEM images of encapsulated phage [185] . Reprinted with permission from Kerry and Danish (2021). Copyright 2021 Kerry and Danish. In order to improve drug permeability, a self-emulsifying drug delivery system (SEDDS) has been documented by Arshad et al. (2021) . This system has been investigated to enhance muco-penetration of ciprofloxacin. As a cell-penetrating peptide, poly-L-lysine was incorporated into the SEDDS of ciprofloxacin to enhance the system selectivity of the intracellular target of the Salmonella enterica serovar Typhi infection reservoir. This study showed that the SEDDS formulation was able to release 85% of ciprofloxacin in 72 h. An antimicrobial study showed that ciprofloxacin loaded in a SEDDS of poly-L-lysine, mannose, preactivated hyaluronic acid, and Pluronic F127 could minimize the survival rate of S. Typhi strains as well as show high killing activity compared to pure ciprofloxacin suspension. Moreover, the cellular uptake capability within the intracellular compartment of the macrophage has been confirmed by fluorescence imaging of the formulation. Therefore, this system could be a promising approach for eradicating S. Typhi intracellularly [184] . Microscopic images of tissue histology and results of treatment with SEDDS in the intestine can be seen in Figure 5B . Nowadays, mitigation of antimicrobial resistance is not only focused on innovation of drug formulation. As a biological material, the enteric-targeted microbiome is difficult to formulate into an oral delivery formulation due to its high sensitivity to acid exposure. In order to overcome this issue, a study from Richards and Malik has successfully encapsulated an E. coli phage T3 in three different pH-responsive formulations for targeting the infectious bacterial cells. The encapsulated phages ( Figure 5C ) achieved a complete release within 30-45 min following exposure to different pH of simulated intestinal fluid (pH 5.5, pH 6, and pH 7). Moreover, in an acidic environment the encapsulate phages were stable, and the T3 phage can survive at low acidic pH. The stability study findings showed a 1 log decrease of phage viability in four weeks in refrigerator storage [185] . Parenteral administration of antimicrobial agents is recommended for patients who have severe and emergency conditions. Although the parenteral route is associated with needle-caused pain during administration, this route is still preferred due to manageable dosage, better bioavailability, and absence of first-pass metabolism [186] . Additionally, a previous study reported that the development of antibiotic resistance might be minimized by administrating the drug via parenteral injection [187] . Through this route, antibiotics can directly reach the systemic circulation and prevent the unnecessary exposure of antibiotics to the gut microbiota, resulting in a delay in antibiotic resistance [187] . In order to deliver an antibiotic through intravenous administration, Alcantara et al. developed nanostructured lipid carriers (NLCs) of mupirocin. This approach was able to produce particle in the size range of 99.8 to 235 nm. In this work, the NLCs exhibited the bacterial inhibition of S. pyogenes and S. aureus at 1.56 µg/mL and 0.78 µg/mL, respectively. These results were lower than free mupirocin, whose inhibition activity was 6.25 µg/mL and 1.56 µg/mL against S. pyogenes and S. aureus, respectively. An in vivo pharmacokinetic study in rabbits showed that plasma concentration and drug clearance were enhanced in NLCs formulations compared to free mupirocin. Therefore, this study provides a potentiality of mupirocin as a new parenteral antibiotic that was highly promising to be an alternative option for resistant bacterial infections [188] . A recent study has investigated the formation of inclusion complexes of doxycycline and HP-β-CD in order to develop a reconstitution formulation utilizing both freeze-drying and electrospinning techniques [186] . The results showed that the complex powder of doxycycline-HP-β-CD was fully dissolved in 1.5 mL water with the final concentration of 66.7 mg/mL. This concentration is seven times higher than similar marketed products. With regard to the manufacturing technique, electrospinning could produce more reconstitution powder in a day than freeze drying technology. Therefore, this approach could be a promising application in life-threatening conditions that require the rapid onset of doxycycline action [186] . Another problem pertaining to antimicrobial resistance is antibiotic overuse for intracellular infection treatment such as nontyphoidal Salmonella [189] . The inability of antimicrobial agents to access and enter the macrophages, where the pathogens reside, presents difficulties in overcoming this type of infection. Elnaggar et al. offer an alternative by developing nanotruffle formulations loaded with pexiganan and silver nanoparticles. This approach allows us to produce the particle with a specific size, 500-1000 nm, which is small enough for intravenous injection yet large enough to be selectively taken only by infected macrophages. In order to evaluate the antimicrobial activity of this approach, the nanotruffle formulations were evaluated using macrophages infected with different bacteria, namely Shigella flexneri, S. Typhimurium, Listeria monocytogenes, and MRSA. The results showed that the combination of silver and pexiganan in nanotruffle formulations against intracellular pathogens was significantly better than silver nanoparticles alone [190] . Through the rapid accumulation of nanotruffle formulations in the reticuloendothelial system following the intravenous administration, this study provides preliminary evidence and a high degree of promise that nanotruffle formulation has a viable application in the treatment of intracellular bacterial infection. The inhalation route becomes a preferred route, especially for delivering several antibiotics targeted for any bacteria residing in the respiratory tract and organ. Indeed, pulmonary delivery enables us to deposit high concentrations in the lung, as a target site, while at the same time reducing systemic exposure [191] . However, the drug dose attained in the lungs can also be absorbed and reach systemic circulation via the pulmonary vasculature [192] . Devices are required to be incorporated with antibiotic formulations to facilitate drug delivery into the lungs. Generally, the devices are categorized into three: nebulizers, pressured metered-dose inhalers (PMDIs), and dry powder inhalers (DPIs). Firstly, nebulizers are developed for the drug in an aqueous solution or suspension form. This device is linked to a compressor as an external nebulization source for atomizing the solution or suspension into fine droplets. Secondly, PMDIs is combined with a propellant under pressure to generate an aerosol from suspension or solution. This device can produce a more uniform spray than is achieved with nebulizers [193] . Lastly, DPIs are developed for dispersing dry particles as an aerosol. The exact dose of drug administered using this device is controlled by the patient's inspiratory airflow, duration, and inhaled volume [194] . To date, several approaches in dry inhaler powder have been proposed to be combined with DPIs for antibiotic administration in pulmonary-targeted therapy. Tuberculosis is still a primary health concern, especially in developing countries. This disease can be cured by an antibiotic regimen that needs to be taken daily for up to six months [3] . However, failure in tuberculosis therapy and drug-resistant cases further complicates the treatment due to poor patient compliance for taking many pills daily. Consequently, several studies have been developed to improve tuberculosis treatment through pulmonary delivery to date. Chogale et al. reported that three main tuberculosis drugs, namely isoniazid, pyrazinamide, and rifampicin, were successfully formulated into dry powders incorporated with DPIs for direct pulmonary delivery. Initially, the three drugs were prepared into nanocrystals with a particle size in the range of 565 to 762 nm. The triple combination of dry powder inhaler was then developed by involving the nanocrystals and lactose into the formulations. The results confirmed that the dry powder formulation exhibited excellent flow properties and a fine particle fraction of 45%. In vivo lung deposition study showed that up to 80% of the doses were successfully administered to the lung, and approximately 20% of dose was retained over 24 h [195] . Using other approaches for improved tuberculosis treatment, Berkenfeld et al. have recently demonstrated the potential of the spray drying technique to produce rifampicin in a stable dry powder formulation for direct pulmonary delivery. In this work, the authors investigated the stability of rifampicin spray dried from different solvents (ethanol, methanol, and water). The sample spray dried from ethanol was found to be stable in the storage condition over six months; on the contrary, samples from methanol and water exhibited a significant degradation and aggregation ( Figure 6A ) [196] . (4) water [196] . Reprinted with permission from ref. [196] . Copyright 2020 Elsevier Inc. (B) Transmission electron microscope (TEM) image of meropenem particles, scale bar: 200 nm [197] . Reprinted with permission from ref. [197] . Copyright 2020 Elsevier Inc. (C) SEM image of cross-sections of Poly(lactic-co-glycolic acid) (PLGA) microspheres containing levofloxacin [198] . Reprinted with permission from ref. [198] . Copyright 2018 Elsevier Inc. In order to combat another bacterial infection, meropenem ( Figure 6B ) was formulated into dry inhaler powder to achieve a better therapeutical effect due to stability issues in solution form as well as a short plasma half-life following intravenous administration [197] . The particle size was found to be in the range of 0.2-2 µm by utilizing a conventional micronization technique using mortar and pestle. The result of in vitro aerosol performance shows that the combination of L-leucine, lactose, and magnesium stearate could significantly improve the aerosol performance of meropenem up to 37.5%. Considering the desired therapeutic concentration in plasma is 25 µg/mL via injections, 200 mg of this dry powder inhalation formulation (containing 2.5% of meropenem) could be extrapolated to achieve a similar therapeutic result to an injection containing 500 mg meropenem [197] . Although this study offers a simple manufacturing process that is promising and industrially scalable, no antimicrobial or animal study supports the susceptibility and effectiveness of this approach against bacterial infection. Poly(lactic-co-glycolic acid) (PLGA) microspheres containing levofloxacin for dry inhaler powder was developed by Gaspar et al. (Figure 6C ). The microsphere formulations were evaluated for drug release and cytotoxicity. The selected microspheres formulation had controlled release properties and were well-tolerated by Calu-3 cells. Considering 60-70% of the levofloxacin is released from the PLGA-microsphere over 24 h, this means the formulation can be highly concentrated in the lung for a prolonged time. This approach could be beneficial for patients since the dosing frequency can be reduced and treatment efficiency can be improved [198] . Li et al. developed hydrogel formulations containing a combination of physically crosslinked antimicrobial agents possessing broad spectrum activities prepared from the complex reaction between two biodegradable polymers, namely PLLA-PEG-PLLA (PLLA = poly(l-lactide) and polycationic PDLA-CPC-PDLA (PDLA = poly(d-lactide, CPC = cationic polycarbonate) [199] . The synthesis process of PLLA-PEG-PLLA and PDLA-CPC-PDLA precursor triblock copolymers was carried out through organo-catalyzed ROP. As the macroinitiators, the authors used PEG and polycarbonate in the synthesis reactions. Via this reaction, the desired characteristic of polymer, namely well-controlled sequence (4) water [196] . Reprinted with permission from ref. [196] . Copyright 2020 Elsevier Inc. (B) Transmission electron microscope (TEM) image of meropenem particles, scale bar: 200 nm [197] . Reprinted with permission from ref. [197] . Copyright 2020 Elsevier Inc. (C) SEM image of cross-sections of Poly(lactic-co-glycolic acid) (PLGA) microspheres containing levofloxacin [198] . Reprinted with permission from ref. [198] . Copyright 2018 Elsevier Inc. In order to combat another bacterial infection, meropenem ( Figure 6B ) was formulated into dry inhaler powder to achieve a better therapeutical effect due to stability issues in solution form as well as a short plasma half-life following intravenous administration [197] . The particle size was found to be in the range of 0.2-2 µm by utilizing a conventional micronization technique using mortar and pestle. The result of in vitro aerosol performance shows that the combination of L-leucine, lactose, and magnesium stearate could significantly improve the aerosol performance of meropenem up to 37.5%. Considering the desired therapeutic concentration in plasma is 25 µg/mL via injections, 200 mg of this dry powder inhalation formulation (containing 2.5% of meropenem) could be extrapolated to achieve a similar therapeutic result to an injection containing 500 mg meropenem [197] . Although this study offers a simple manufacturing process that is promising and industrially scalable, no antimicrobial or animal study supports the susceptibility and effectiveness of this approach against bacterial infection. Poly(lactic-co-glycolic acid) (PLGA) microspheres containing levofloxacin for dry inhaler powder was developed by Gaspar et al. (Figure 6C ). The microsphere formulations were evaluated for drug release and cytotoxicity. The selected microspheres formulation had controlled release properties and were well-tolerated by Calu-3 cells. Considering 60-70% of the levofloxacin is released from the PLGA-microsphere over 24 h, this means the formulation can be highly concentrated in the lung for a prolonged time. This approach could be beneficial for patients since the dosing frequency can be reduced and treatment efficiency can be improved [198] . Li et al. developed hydrogel formulations containing a combination of physically crosslinked antimicrobial agents possessing broad spectrum activities prepared from the complex reaction between two biodegradable polymers, namely PLLA-PEG-PLLA (PLLA = poly(l-lactide) and polycationic PDLA-CPC-PDLA (PDLA = poly(d-lactide, CPC = cationic polycarbonate) [199] . The synthesis process of PLLA-PEG-PLLA and PDLA-CPC-PDLA precursor triblock copolymers was carried out through organo-catalyzed ROP. As the macroinitiators, the authors used PEG and polycarbonate in the synthesis reactions. Via this reaction, the desired characteristic of polymer, namely well-controlled sequence sizes with the optimum degree of polymerization, was achieved. Afterwards, the precursors were reacted with trimethylamine through quaternization in order to attain the cationic polycarbonates. Importantly, due to the efficient combination of PLLA-PEG-PLLA and PDLA-CPC-PDLA precursor triblock copolymers, the authors were able to produce a succession of supramolecular hydrogel assemblies with lower critical solution temperature performance, shear-thinning performance, and abilities to disrupt biofilm at 37 • C [199] . In this study, the antimicrobial activity of the formulation was investigated against various types of pathogenic microorganisms, namely S. aureus, E. coli, and C. albicans. Additionally, several clinically isolated microorganisms were also used, namely methicillin-resistant S. aureus, vancomycin-resistant enterococci, P. aeruginosa, A. baumannii (resistant to most antibiotics), K. pneumonia (resistant to carbapenem), and C. neoformans. The results showed that the hydrogels were found to entirely eradicate growth and display complete killing effectiveness on all the microorganisms examined even though the cationic PDLA-CPC-PDLA polymers in solution exhibited poor antimicrobial performance [199] . Specifically, following the investigation of the mechanism of the antimicrobial activity, the disruption of membrane or cell wall of microorganisms was found to be the possible mechanism after the observation of morphology of microorganisms using scanning electron microscopy. Essentially, the optimum formulation of hydrogel developed in this study exhibited insignificant toxicity both in in vitro and in vivo evaluations. Numerous polysaccharide derivates have been extensively applied as the main vehicles for the delivery of antimicrobial agents because of their biocompatibility and biodegradability [200] . For instance, Zumbuehl et al. developed hydrogels containing the broadspectrum antifungal drug, amphotericin B, with dextran as the hydrogel vehicle. The dextran-based hydrogel laded with amphotericin B was able to kill C. albicans effectively within two hours. Importantly, the application of this formulation did not result in any hemolysis [201] . Using a similar approach, Glisoni el al. developed hydrogels containing thiosemicarbazones formulated from β-cyclodextrin for ocular delivery [202] . The antimicrobial activity evaluations showed that hydrogels laded with Thiosemicarbazone successfully eradicated P. aeruginosa and S. aureus, two bacterial strains that generally cause ocular infections [202] . In addition to the polysaccharide derivates, in the topical hydrogel formulation, poly(acrylate)s have also been applied as a vehicle. These polymers are well-known for their ability to specifically deliver antibiotics to the desired site, although these compounds have shown poor biodegradable characteristics. In this application, Jones et al. explored different types of hydrogels formulated via the copolymerization of methacrylic acid and N-isopropylacrylamide. In their study, various types of hydroxy methacrylates were used and chlorohexidine diacetate was used as the active ingredient [203] . The results showed that the optimum formulation was obtained by copolymerizing N-isopropylacrylamide with 2-hydroxyethyl methacrylate at a ratio of 1:1. The rapid and controlled release of chlorohexidine diacetate was attained specifically at 37 • C. Importantly, the formulation successfully inhibited the growth of S. epidermis. Cheng et al. developed a combination of antimicrobial and antifouling agents incorporated into hydrogel formulations. This combination was established with the aims of avoiding the development of planktonic bacterial cells whilst maintaining clean surfaces [174] . In their study, salicylate as a mild antimicrobial compound was used as the active ingredient and formulated into a hydrogel prepared from the crosslinking reaction of a poly(carboxybetaine) (pCB)-containing methacrylate-base as its anion. The results showed that the hydrogel formulation was able to stop the proliferation of two bacteria strains, namely S. epidermidis and E. coli with 99.9% killing efficiency. Accordingly, this approach was found to have a potential application in wound dressings and surface coatings for biomedical apparatus. Remarkably, without the incorporation of salicylate, pCB-based hydrogel was only able to reduce the attachment of the bacteria without killing efficiency. In a follow-up examination, the authors continued using this approach and performed modifications of their study. They changed the use of the methacrylate-based chemically crosslinked hydrogel with a thermosensitive hydrogel. To achieve this purpose, they used thermosensitive polymer, poly(N-isopropylacrylamide) (PNIPAM) in the antimicrobial wound dressing formulation [204] . The results revealed that the addition of NIPAM into the formulation was able to produce a thermo-responsive hydrogel possessing in situ gelation abilities at body temperature. This could potentially result in suitable and desired properties for wound dressing purposes. In the microbial activity evaluation, the hydrogel formulation was found to completely eliminate the growth of E. coli. Importantly, the formulation did not show any cytotoxicity on mammalian fibroblast cell line COS-7 [204] . Yabanoglu et al. examined the antibacterial activities of various topical antimicrobial dressings, namely 1% silver sulfadiazine (SSD), 0.5% chlorhexidine acetate, 3% citric acid, and silver-coated dressing on a multi-drug resistant P. aeruginosa. The study was carried out in vivo in an infected full thickness burn wound model in rats. After a sevenday application period, 1% SSD and silver-coated dressing were found to be effective at reducing the viability of P. aeruginosa colonies in the infected rats. Therefore, these preparations could be considered effective agents in the treatment of burn wound infections. Importantly, in this study, there was no mortality found in any of the groups [170] . As an emerging approach, the formulation of antimicrobial agents into nanoparticles has been found to deliver higher amounts of these agents to the infected skin sites. Therefore, this could potentially overcome resistance possibility with low side effects. The incorporation of antimicrobial agents into nanoparticle formulations circumvent the microorganism resistance by avoiding the declined uptake and improved efflux of drug from the cells of the microorganisms, intracellular bacteria, and formation of biofilm [175] . Friedman et al. formulated nitric oxide loaded nanoparticles for prospective application in antimicrobial treatment against MRSA and MSSA ( Figure 7A ) [178] . Following the determination of the MICs values, nanoparticles laden with nitrite oxide showed MIC values between 312 and 2500 µg/mL against MRSA and between 312 and 1250 µg/mL against methicillin-sensitive S. aureus (MSSA) strains. Importantly, the nanoparticles were found to be non-toxic in human fibroblasts ( Figure 7B ). In an in vivo study, an MRSA-infected wound was developed in murine model. The results showed that infected mice receiving nanoparticles containing nitric oxide exhibited drastically lower bacterial bioburden when compared to untreated mice or mice receiving nanoparticles. It has been hypothesized that nanoparticles laden with nitric oxide enhanced the wound healing properties by triggering minimum degradation of collagen. The results obtained here supported the notion that nanoparticles containing nitric oxide could potentially be utilized as an innovative topical antimicrobial dosage form for the effective management of skin and cutaneous infected wounds [205] . In another work related to nitric oxide, Choi et al. developed S-nitrosoglutathione (GSNO) into chitosan film for the treatment of bacterial biofilm infection caused by MRSA ( Figure 7C-E) . In this study, chitosan was selected due to its antimicrobial and anti-biofilm properties [206] . As an active ingredient, S-nitrosoglutathione has been recognized as an excellent nitric oxide (NO) donor to eliminate pathogenic biofilms and to improve wound healing behaviors. The results showed that the incorporated GSNO into chitosan films was able to control the release of NO for three days in simulated wound fluid. The film formulation containing GSNO-loaded films could result in more than three logs reduction in MRSA viability. Furthermore, this approach showed three-times greater anti-biofilm properties in comparison with the control formulation. In vivo study was carried out in MRSA biofilm-infected wounds in non-diabetic and STZ-induced diabetic mice. Importantly, in in vivo study, the film containing GSNO exhibited rapid biofilm removal and a decrease in wound size, collagen deposition, and rates of epithelialization when compared to the untreated and film without GSNO cohorts ( Figure 7F ) [206] . This study suggested that GSNO incorporated into films could be a favorable system for the management of infection associated with MRSA biofilms. Results of toxicity evaluations of nanoparticles containing NO, showing non-toxic activity in human fibroblasts ( † indicates that p > 0.05, § indicates that p < 0.0194) (B) [178] . Reprinted with permission from ref. [178] . Copyright 2008 Elsevier Inc. Anti-MRSA activity of film containing S-nitrosoglutathione (GSNO) observed using confocal microscope (C). The viability of MRSA following the application of GSNO film (D). The growth of MRSA in TSB medium in the presence of GSNO film (E). Bacterial viability (CFU measurement). Values are expressed as mean ± SD (n = 3); * p < 0.05 compared with the untreated group. (E) Macroscopic images of bacterial density in TSB medium. In vivo antibiofilm activity of GSNO film in non-diabetic and STZ-induced diabetic ICR mice (F) [206] . Reprinted with permission from ref. [206] . Copyright 2019 Elsevier Inc. To date, microneedle delivery systems have been widely used to topically deliver antimicrobial agents into an infection area [176, [207] [208] [209] [210] [211] . Permana et al. developed dissolving microneedles containing doxycycline nanoparticles. The nanoparticles were prepared using responsive polymers, namely poly(lactic-co-glycolic acid) and poly (Ɛ-caprolactone) coated with chitosan [173] . The incorporation of doxycycline into these polymers was able to specifically control the release of the drug in the presence of bacterial cultures. In an ex vivo biofilm model using MRSA and a resistant strain of P. aeruginosa, this approach was able to eradicate up to 99.99% of bacterial bioburden after 48 h of application. Similarly, the authors incorporated silver nanoparticles into bacterially sensitive microparticles prepared from poly (Ɛ-caprolactone). The microparticles were further formulated into dissolving microneedles. In comparison with dissolving microneedles containing silver nanoparticles without microparticle formulations and conventional cream formulations, around 100% of bioburdens of MRSA and resistance strain of P. aeruginosa were eliminated in an ex vivo biofilm model in rat skin after 60 h of the application of this system [207] . Transdermal delivery systems have been developed to deliver antibiotics to the systemic circulation in order to overcome the antimicrobial resistance issue. Rastoge et al. designed an innovative microemulsion formulation to deliver bacteriophage (T4), specifically lysing E. coli via the transdermal route [212] . This study was designed to overcome Results of toxicity evaluations of nanoparticles containing NO, showing non-toxic activity in human fibroblasts ( † indicates that p > 0.05, § indicates that p < 0.0194) (B) [178] . Reprinted with permission from ref. [178] . Copyright 2008 Elsevier Inc. Anti-MRSA activity of film containing S-nitrosoglutathione (GSNO) observed using confocal microscope (C). The viability of MRSA following the application of GSNO film (D). The growth of MRSA in TSB medium in the presence of GSNO film (E). Bacterial viability (CFU measurement). Values are expressed as mean ± SD (n = 3); * p < 0.05 compared with the untreated group. (E) Macroscopic images of bacterial density in TSB medium. In vivo antibiofilm activity of GSNO film in non-diabetic and STZ-induced diabetic ICR mice (F) [206] . Reprinted with permission from ref. [206] . Copyright 2019 Elsevier Inc. To date, microneedle delivery systems have been widely used to topically deliver antimicrobial agents into an infection area [176, [207] [208] [209] [210] [211] . Permana et al. developed dissolving microneedles containing doxycycline nanoparticles. The nanoparticles were prepared using responsive polymers, namely poly(lactic-co-glycolic acid) and poly (E-caprolactone) coated with chitosan [173] . The incorporation of doxycycline into these polymers was able to specifically control the release of the drug in the presence of bacterial cultures. In an ex vivo biofilm model using MRSA and a resistant strain of P. aeruginosa, this approach was able to eradicate up to 99.99% of bacterial bioburden after 48 h of application. Similarly, the authors incorporated silver nanoparticles into bacterially sensitive microparticles prepared from poly (E-caprolactone). The microparticles were further formulated into dissolving microneedles. In comparison with dissolving microneedles containing silver nanoparticles without microparticle formulations and conventional cream formulations, around 100% of bioburdens of MRSA and resistance strain of P. aeruginosa were eliminated in an ex vivo biofilm model in rat skin after 60 h of the application of this system [207] . Transdermal delivery systems have been developed to deliver antibiotics to the systemic circulation in order to overcome the antimicrobial resistance issue. Rastoge et al. designed an innovative microemulsion formulation to deliver bacteriophage (T4), specifically lysing E. coli via the transdermal route [212] . This study was designed to overcome the resistance issue in treatment associated E. coli. In this study, the microemulsion formulation was done using pseudoternary phase diagrams. The compositions of the microemulsions were the combination of ethyl oleate, Tween 80: Span 20 and water as oil phase, and stabilizers as aqueous phase, respectively. The results showed that the microemulsion droplets were approximately 200 nm in size with a narrow size distribution. Importantly, the formulations possessed acceptable viscosity and surface tension. The transdermal ability evaluated by ex vivo permeation showed that up to 6.7 × 10 6 PFU/mL of T4 were able to permeate across the skin from the microemulsion formulation. In vivo permeation study was performed in the E. coli challenged rats and 5.49 × 10 5 PFU/mL of T4 was found in the blood of the rats. Furthermore, at the end of the study 2.48 × 10 5 PFU/mL of T4 was found in germ free rats. Importantly, in the cohort where the rats infected with E. coli received microemulsion of T4, no mortality was found. On the other hand, when the infected rats did not receive the developed formulation, noteworthy mortality was found. Moreover, analyzed using histological and IL-6 immunofluorescence evaluation, the administration of microemulsion containing T4 exhibited a safety effect on the treatment. Therefore, this approach could potentially be utilized as an alternative treatment for the infections caused by antibiotic-resistant bacteria [213] . As a solution for infection in the neonatal, gentamicin was formulated into a microneedle approach delivered transdermally [214] . The dissolving microneedles were prepared using two water soluble polymers, namely sodium hyaluronate and poly(vinylpyrrolidone). The microneedles were found to have adequate mechanical and penetration properties. In vitro transdermal delivery showed that microneedles were able to deliver around 4.45 mg of gentamicin after 6 h. In an in vivo study using rats, it was found that dissolving microneedles could deliver gentamicin transdermally at therapeutic levels. Furthermore, Rodgers et al. evaluated the in vivo efficacy of gentamicin loaded dissolving microneedles in a murine model of K. pneumoniae bacterial infection [172] . The microneedles were applied to murine ears. The results showed that the bacterial bioburden in the nasal-associated lymphoid tissue and lungs in the infected mice administered gentamicin loaded microneedles decreased significantly in comparison with the untreated cohorts. In order to increase the efficacy of vancomycin hydrochloride for MRSA treatment, Magdy et al. developed an ethosomes approach combined with iontophoresis to transdermally deliver vancomycin [215] . Ethosomes were prepared by a cold method using soy phospholipids, ethanol, and propylene glycol. Vancomycin loaded ethosomes exhibited excellent electrochemical stability. Furthermore, cathodal iontophoresis of negatively charged vesicles displayed the highest transdermal flux with a value of 550 µg/cm 2 /h in comparison with free drug solution. In this study, a Sprague Dawley rats infection model was prepared by producing mediastinitis using MRSA. The transdermal delivery developed in this study was compared to intramuscular administration and an untreated group. The in vivo efficacy study showed that the bacterial bioburden of the infected groups receiving intramuscular administration and transdermal administration were not significantly different and significantly higher compared to untreated group. Accordingly, the combination of ethosomes and iontophoresis were successfully able to deliver vancomycin transdermally [215] . Recently, with similar purpose, Ramadon et al. further developed two types of microneedles, namely dissolving and hydrogel-forming, to also deliver vancomycin transdermally [216] . All formulations were characterized, and it was found that the microneedles prepared possessed sufficient mechanical characteristics. Furthermore, in an ex vivo transdermal delivery study across the neonatal porcine skin, both types of microneedles successfully delivered vancomycin with the percentage of drug around 46.39 ± 8.04% and 7.99 ± 0.98% for dissolving and hydrogel-forming microneedles, respectively. In in vivo studies in a rat model, the administration of dissolving and hydrogel-forming microneedles resulted in the area under the plasma concentration time curve from time zero to infinity (AUC0-∞) values of 162.04 ± 61.84 and 61.01 ± 28.50 µg.h/mL, respectively. On the other hand, these values were significantly higher than that of the oral administration of vancomycin [216] . Therefore, transdermal delivery of vancomycin could be an alternative treatment for infectious diseases caused by MRSA. In order to assist in the delivery of clotrimazole for vaginal delivery, de Lima et al. developed nanocapsule formulations incorporated into hydrogel dosage forms ( Figure 8A ) [171] . In this study, Pemulen ® TR1 and Pullulan were used as mucoadhesive polymers. The mucoadhesive hydrogels obtained were found to have pH values close to vagina pH, indicating that the application of these gels would not cause any irritation to the vaginal mucosa. In spreadability evaluations, the clotrimazole-loaded nanocapsules in hydrogel formulations showed similar properties compared to free clotrimazole loaded hydrogel formulations. The mucoadhesive evaluations showed that pullulan with concentration of 3% showed an adequate mucoadhesive in cow vaginal mucosa. Importantly, this innovative approach could retain clotrimazole in the vaginal surface ( Figure 8B) . Accordingly, the hydrogel formulations containing clotrimazole nanocapsules and pullulan could potentially be used as an alternative treatment of vulvovaginal candidiasis. vancomycin [216] . Therefore, transdermal delivery of vancomycin could be an alternative treatment for infectious diseases caused by MRSA. In order to assist in the delivery of clotrimazole for vaginal delivery, de Lima et al. developed nanocapsule formulations incorporated into hydrogel dosage forms ( Figure 8A ) [171] . In this study, Pemulen ® TR1 and Pullulan were used as mucoadhesive polymers. The mucoadhesive hydrogels obtained were found to have pH values close to vagina pH, indicating that the application of these gels would not cause any irritation to the vaginal mucosa. In spreadability evaluations, the clotrimazole-loaded nanocapsules in hydrogel formulations showed similar properties compared to free clotrimazole loaded hydrogel formulations. The mucoadhesive evaluations showed that pullulan with concentration of 3% showed an adequate mucoadhesive in cow vaginal mucosa. Importantly, this innovative approach could retain clotrimazole in the vaginal surface ( Figure 8B ). Accordingly, the hydrogel formulations containing clotrimazole nanocapsules and pullulan could potentially be used as an alternative treatment of vulvovaginal candidiasis. [171] . Reprinted with permission from ref. [171] . Copyright 2017 Elsevier Inc.The results of ex vivo permeation (C) and retention evaluations in vaginal mucosa (D) of secnidazole loaded hydrogels [217] . * p < 0.05 compared with Control group. Reprinted with permission from ref. [217] . Copyright 2021 Elsevier Inc. In another study, Argenta et al. formulated thermosensitive-bioadhesive vaginal gel containing secnidazole [217] . This drug has been considered an alternative antimicrobial agent for infection caused by Trichomonas vaginalis. Additionally, this drug is also used to solve antimicrobial resistance issues of conventional therapy. In this study, the gel contained poloxamer 407 and poloxamer 188 as thermosensitive polymers and chitosan as mucoadhesive agents. The formulations showed desired mucoadhesive properties and sol-gel transition temperature with a rapid gelation time. Importantly, the thermosensitive-bioadhesive vaginal gel was able to reduce the permeability and increase the retention of secnidazole in comparison with control formulation (Figure 8C,D) . With these results, this approach could be beneficial in the treatment of trichomoniasis. [171] . Reprinted with permission from ref. [171] . Copyright 2017 Elsevier Inc. The results of ex vivo permeation (C) and retention evaluations in vaginal mucosa (D) of secnidazole loaded hydrogels [217] . * p < 0.05 compared with Control group. Reprinted with permission from ref. [217] . Copyright 2021 Elsevier Inc. In another study, Argenta et al. formulated thermosensitive-bioadhesive vaginal gel containing secnidazole [217] . This drug has been considered an alternative antimicrobial agent for infection caused by Trichomonas vaginalis. Additionally, this drug is also used to solve antimicrobial resistance issues of conventional therapy. In this study, the gel contained poloxamer 407 and poloxamer 188 as thermosensitive polymers and chitosan as mucoadhesive agents. The formulations showed desired mucoadhesive properties and sol-gel transition temperature with a rapid gelation time. Importantly, the thermosensitivebioadhesive vaginal gel was able to reduce the permeability and increase the retention of secnidazole in comparison with control formulation (Figure 8C,D) . With these results, this approach could be beneficial in the treatment of trichomoniasis. Recently, to improve the solubility of itraconazole in vaginal delivery, this drug was formulated into solid dispersion loaded into gel flakes [177] . This approach was further incorporated into thermosensitive and bioadhesive vaginal gel. The formulation of itraconazole in solid dispersion was able to improve the solubility of the drug. Additionally, being formulated into gel flakes, the itraconazole was encapsulated with desirable entrapment efficiency and drug-loading capacity. The hydrogel formulation contained pluronic as a thermosensitive agent and HPMC as the mucoadhesive polymer. The results showed that the incorporation of solid dispersion-gel flakes of intraconazole into thermosensitive and bioadhesive hydrogel improved the localization of the drug in the vaginal tissue in an ex vivo study. Importantly, the formulation was found to have adequate mucoadhesive and thermosensitive properties. In an in vivo study using a vaginal candidiasis model of C. albicans-infected Wistar rats, this combination approach improved the antifungal activity of itraconazole in comparison with other treated groups [177] . Escalation of infectious cases caused by antimicrobial resistant pathogenic microorganisms has become a significant threat worldwide. Currently available antimicrobial preparations, unfortunately, have not been properly utilized to address this issue. Given the rise of pathogen resistance and the inadequate supply of effective antimicrobials, we sought to discuss the importance of discovering novel synthetic or naturally occurring antibacterial compounds to manage antimicrobial resistance. Evidently, this issue is vital for humans' wellbeing, thus innovative and meticulous actions on the application of various drug delivery approaches to deliver those novel antimicrobial compounds through numerous routes shall provide advantageous approaches to the management of infectious diseases. Nevertheless, there is a need to precisely design the delivery systems for different types of infectious diseases to prevent the emergence of antimicrobial-resistant pathogens towards the newly developed antimicrobial agents. In the end, careful considerations in the development of cost-effective novel antimicrobials and highly effective drug delivery systems shall offer substantial benefits for all parties, including research institutes, pharmaceutical industries, health providers, and public communities. Such cooperation will also provide a great scientific opportunity to connect basic findings (bench) to clinical implications (bedside) in the continuous effort to tackle the emergence of antimicrobial-resistant pathogenic microbes. Multidrug-resistant, extensively drug-resistant and pandrug-resistant bacteria: An international expert proposal for interim standard definitions for acquired resistance No Time to Wait: Securing the Future from Drug-Resistant Infection Report to the Secretary General of the United Nation Pandrug-resistant gram-negative bacteria: A systematic review of current epidemiology, prognosis and treatment options Antibiotics 2021 Candida auris: A rapidly emerging cause of hospital-acquired multidrug-resistant fungal infections globally Candida auris: From multidrug resistance to pan-resistant strains Antibiotic Resistance Threats in the United States; Department of Health and Human Services Antibiotics: From prehistory to the present day Antibacterial Agents in Clinical and Preclinical Development: An Overview and Analysis In vitro activity of N-acetylcysteine against Stenotrophomonas maltophilia and Burkholderia cepacia complex grown in planktonic phase and biofilm In vitro synergism of colistin in combination with N-acetylcysteine against Acinetobacter baumannii grown in planktonic phase and in biofilms Co-infections: Potentially lethal and unexplored in COVID-19 Antimicrobial Resistance Threats in the emerging COVID-19 pandemic: Where do we stand? The antibiotic resistance crisis: Causes and threats Evidence of antibiotic resistance from populationbased studies: A narrative review Antimicrobials and antibiotic-resistant bacteria: A risk to the environment and to public health Resistant pathogens as causes of traveller's diarrhea globally and impact(s) on treatment failure and recommendations Antibiotic resistance in travellers' diarrhoeal disease, an external perspective Antimicrobial Resistance in the Asia Pacific region: A meeting report The effect of travel restrictions on the spread of the 2019 novel coronavirus (COVID-19) outbreak COVID-19 spread and inter-county travel: Daily evidence from the U Antimicrobial resistance: Implications and costs Opportunities and challenges in managing antibiotic resistance in bacteria using plant secondary metabolites Antibiotic overuse: A key driver of antimicrobial resistance Overcoming Intrinsic and Acquired Resistance Mechanisms Associated with the Cell Wall of Gram-Negative Bacteria An overview of the antimicrobial resistance mechanisms of bacteria Antibiotic Resistance Mechanisms in Bacteria: Relationships Between Resistance Determinants of Antibiotic Producers, Environmental Bacteria, and Clinical Pathogens Bacterial Enzymes and Antibiotic Resistance β-Lactamases and β-Lactamase Inhibitors in the 21st Century A Focus on Current Challenges. Cold Spring Harb. Perspect. Med. 2017, 7, a025239 Resistance of Gram-Negative Bacteria to Current Antibacterial Agents and Approaches to Resolve It Vancomycin Resistance in Staphylococcus aureus Molecular mechanisms of biofilm-based antibiotic resistance and tolerance in pathogenic bacteria Antibiotics 2021 Antibiotics versus biofilm: An emerging battleground in microbial communities Commentary: Tolerance and Resistance of Pseudomonas aeruginosa Biofilms to Antimicrobial Agents-How P. aeruginosa Can Escape Antibiotics Resistance to β-lactam antibiotics conferred by point mutations in penicillin-binding proteins PBP3, PBP4 and PBP6 in Salmonella enterica Mutations in penicillin-binding protein (PBP) genes and in non-PBP genes during selection of penicillinresistant Streptococcus gordonii Mechanisms of Resistance to Aminoglycoside Antibiotics: Overview and Perspectives Practical implications of erythromycin resistance gene diversity on surveillance and monitoring of resistance Mechanisms of drug resistance: Quinolone resistance Resistance to trimethoprim and sulfonamides Efflux pumps as antimicrobial resistance mechanisms The importance of efflux pumps in bacterial antibiotic resistance RND efflux pumps in Gram-negative bacteria; regulation, structure and role in antibiotic resistance The Varied Role of Efflux Pumps of the MFS Family in the Interplay of Bacteria with Animal and Plant Cells Small multidrug resistance proteins: A multidrug transporter family that continues to grow Characterization of MATE-type multidrug efflux pumps from Klebsiella pneumoniae MGH78578 ATP-Binding Cassette Transporter VcaM from Vibrio cholerae is Dependent on the Outer Membrane Factor Family for Its Function An Update on Existing and Emerging Data for Meropenem-Vaborbactam New antibiotics for the treatment of infections by multidrug-resistant microorganisms Efficacy and safety of cefiderocol or best available therapy for the treatment of serious infections caused by carbapenem-resistant Gram-negative bacteria (CREDIBLE-CR): A randomised, open-label, multicentre, pathogen-focused, descriptive, phase 3 trial Delafloxacin-A novel fluoroquinolone for the treatment of ciprofloxacinresistant Pseudomonas aeruginosa in patients with cystic fibrosis Place in Therapy and Review of Microbiologic, Clinical and Pharmacologic Properties Eravacycline: A Review in Complicated Intra-Abdominal Infections An overview of oral lascufloxacin, a novel quinolone antibiotic Phase III double-blind comparative study of lascufloxacin versus levofloxacin in patients with community-acquired pneumonia Lefamulin: A Novel Semisynthetic Pleuromutilin Antibiotic for Community-acquired Bacterial Pneumonia Omadacycline for Acute Bacterial Skin and Skin-Structure Infections Omadacycline for Community-Acquired Bacterial Pneumonia Antibiotics 2021 Plazomicin: A Novel Aminoglycoside for the Treatment of Resistant Gram-Negative Bacterial Infections Treatment of Highly Drug-Resistant Pulmonary Tuberculosis Imipenem-Cilastatin-Relebactam: A Novel β-Lactam-β-Lactamase Inhibitor Combination for the Treatment of Multidrug-Resistant Gram-Negative Infections Imipenem/cilastatin/relebactam: A new carbapenem β-lactamase inhibitor combination Meropenem-vaborbactam: A new weapon in the war against infections due to resistant Gram-negative bacteria A. β-Lactams and β-Lactamase Inhibitors: An Overview. Cold Spring Harb The latest advances in β-lactam/β-lactamase inhibitor combinations for the treatment of Gram-negative bacterial infections In vitro Activity of Sulopenem, an Oral Penem, against Urinary Isolates of Escherichia coli β-lactam antibiotics: An overview from a medicinal chemistry perspective A First-in-Human Safety, Tolerability, and Pharmacokinetics Study of Benapenem in Healthy Chinese Volunteers Colchón, E. β-Lactamase Inhibitors to Restore the Efficacy of Antibiotics against Superbugs Sulbactam and the Diazabicyclooctenone β-Lactamase Inhibitor ETX2514 as a Novel Therapeutic Agent Morrissey, I. 694. In vitro Antibacterial Activity of Sulbactam-Durlobactam (ETX2514SUL) Against 121 Recent Acinetobacter baumannii Isolated from Patients in India Recent advances in antibacterial agents In vitro activity of the novel fluorocycline TP-6076 against carbapenem-resistant Acinetobacter baumannii Comparative in vitro activity of plazomicin and older aminoglyosides against Enterobacterales isolates; prevalence of aminoglycoside modifying enzymes and 16S rRNA methyltransferases Efficacy of EBL-1003 (apramycin) against Acinetobacter baumannii lung infections in mice In vitro activity of apramycin against multidrug-, carbapenem-and aminoglycoside-resistant Enterobacteriaceae and Acinetobacter baumannii Resistance to Macrolide Antibiotics in Public Health Pathogens. Cold Spring Harb Phase 3 trial of treating gonorrhoea with solithromycin Solithromycin monotherapy for treatment of community-acquired bacterial pneumonia: A meta-analysis of randomised controlled trials Solithromycin: A novel ketolide antibiotic In vitro Activity of the Novel Lactone Ketolide Nafithromycin (WCK 4873) against Contemporary Clinical Bacteria from a Global Surveillance Program Phytochemicals for human disease: An update on plant-derived compounds antibacterial activity Phase 2a Pharmacokinetic, Safety, and Exploratory Efficacy Evaluation of Oral Gepotidacin (GSK2140944) in Female Participants with Uncomplicated Urinary Tract Infection (Acute Uncomplicated Cystitis) Afabicin, a First-in-Class Antistaphylococcal Antibiotic, in the Treatment of Acute Bacterial Skin and Skin Structure Infections: Clinical Noninferiority to Vancomycin/Linezolid TXA709, an FtsZ-Targeting Benzamide Prodrug with Improved Pharmacokinetics and Enhanced in vivo Efficacy against Methicillin-Resistant Staphylococcus aureus Advances in development of antimicrobial peptidomimetics as potential drugs The Demand for New Antibiotics: Antimicrobial Peptides, Nanoparticles, and Combinatorial Therapies as Future Strategies in Antibacterial Agent Design the Age of Synthetic Biology, Will Antimicrobial Peptides be the Next Generation of Antibiotics? Antibiotics 2020 Fliss, I. Bacteriocins as a new generation of antimicrobials: Toxicity aspects and regulations Isolation and purification of a novel antimicrobial peptide from Porphyra yezoensis Screening, expression, purification and functional characterization of novel antimicrobial peptide genes from hermetia illucens (L.) The rumen eukaryotome is a source of novel antimicrobial peptides with therapeutic potential Future prospects for Antimicrobial peptide development: Peptidomimetics and antimicrobial combinations New Insights into and Updates on Antimicrobial Agents from Natural Products Novel actinomycin group compound from newly isolated Streptomyces sp. RAB12: Isolation, characterization, and evaluation of antimicrobial potential Concepts and methods to access novel antibiotics from actinomycetes Secondary metabolites of actinomycetes and their antibacterial, antifungal and antiviral properties The secondary metabolites of rare actinomycetes: Chemistry and bioactivity Advances in actinomycete research: An actinobase review of 2019 Secondary metabolites and biodiversity of actinomycetes Marine rare actinomycetes: A promising source of structurally diverse and unique novel natural products Deep sea actinomycetes and their secondary metabolites Ohmyungsamycins A and B: Cytotoxic and antimicrobial cyclic peptides produced by Streptomyces sp. from a volcanic island Antimicrobial potential of actinomycetes isolated from the unexplored hot Merzouga desert and their taxonomic diversity Diversity and Antimicrobial Activity of Actinomycetes Isolated from Lut Desert: The Extremely Arid Climatic Zones of Iran Streptomyces fildesensis sp. nov., a novel streptomycete isolated from Antarctic soil Unexplored Extreme Habitats as Sources of Novel and Rare Actinomycetes with Enzyme and Antimicrobial Activities Anthracimycin, a potent anthrax antibiotic from a marine-derived actinomycete Anthracimycin activity against contemporary methicillin-resistant Staphylococcus aureus Evaluation of antimicrobial activity of some plant extracts against antibiotic susceptible and resistant bacterial strains causing wound infection Anti-infective properties of the golden spice curcumin Curcumin, a natural antimicrobial agent with strain-specific activity Synergistic effects of pomegranate and rosemary extracts in combination with antibiotics against antibiotic resistance and biofilm formation of Pseudomonas aeruginosa Synergistic effects of anti-MRSA herbal extracts combined with antibiotics Phenolic-rich green tea extract increases the amoxicillin antibacterial activity Synergistic Effect of Plant Extracts on Endodontic Pathogens Isolated from Teeth with Root Canal Treatment Failure: An In vitro Study Developing new antimicrobial therapies: Are synergistic combinations of plant extracts/compounds with conventional antibiotics the solution? Advantages and limitations of bacteriophages for the treatment of bacterial infections Phage-derived antibacterials: Harnessing the simplicity, plasticity, and diversity of phages Bacteriophages as alternatives to antibiotics in clinical care Bacteriophages ϕMR299-2 and ϕNH-4 can eliminate Pseudomonas aeruginosa in the murine lung and on cystic fibrosis lung airway cells Bacteriophage reduces biofilm of Staphylococcus aureus ex vivo isolates from chronic rhinosinusitis patients Adjunct phage treatment enhances the effectiveness of low antibiotic concentration against Staphylococcus aureus biofilms in vitro Bacteriophage-antibiotic combinations against ciprofloxacin/ceftriaxone-resistant Escherichia coli in vitro and in an experimental Galleria mellonella model Bacteriophages as Vehicles for Antibiotic Resistance Genes in the Environment Quinolone resistance genes (qnrA and qnrS) in bacteriophage particles from wastewater samples and the effect of inducing agents on packaged antibiotic resistance genes Phage Therapy in the Resistance Era: Where Do We Stand and Where Are We Going? The evolving role of chemical synthesis in antibacterial drug discovery New 2-Thiopyridines as potential candidates for killing both actively growing and dormant Mycobacterium tuberculosis cells Novel small-molecule antibacterials against gram-positive pathogens of Staphylococcus and Enterococcus species New urea derivatives as potential antimicrobial agents: Synthesis, biological evaluation, and molecular docking studies A novel synthetic flavonoid with potent antibacterial properties: In vitro activity and proposed mode of action Novel semisynthetic antibiotics from caprazamycins A-G: Caprazene derivatives and their antibacterial activity Peptidomimetics as a new generation of antimicrobial agents: Current progress Ceragenins as Mimics of Endogenous Antimicrobial Peptides Potential synergy activity of the novel ceragenin, CSA-13, against carbapenem-resistant Acinetobacter baumannii strains isolated from bacteremia patients Comparative in vitro antimicrobial activities of CSA-142 and CSA-192, secondgeneration ceragenins, with CSA-13 against various microorganisms Antibacterial and antibiofilm activities of ceragenins against Pseudomonas aeruginosa clinical isolates. Turk Bozkurt-Guzel, C. In vitro assessment of CSA-131 and CSA-131 poloxamer form for the treatment of Stenotrophomonas maltophilia infections in cystic fibrosis Synergistic Activity of Ceragenins Against Carbapenem-Resistant Acinetobacter baumannii Strains in Both Checkerboard and Dynamic Time-Kill Assays Endolysins as antimicrobials The Advantages and Challenges of Using Endolysins in a Clinical Setting Preclinical safety evaluation of intravenously administered SAL200 containing the recombinant phage endolysin SAL-1 as a pharmaceutical ingredient Pharmacokinetics and Tolerance of the Phage Endolysin-Based Candidate Drug SAL200 after a Single Intravenous Administration among Healthy Volunteers Endolysin treatment against Staphylococcus aureus in adults with atopic dermatitis: A randomized controlled trial Characterization of LysBC17, a lytic endopeptidase from Bacillus cereus Characterization of two glycosyl hydrolases, putative prophage endolysins, that target Clostridium perfringens a New Recombinant Phage Endolysin with a Broad Spectrum Antibacterial Activity. Viruses A Novel Acinetobacter baumannii Bacteriophage Endolysin LysAB54 With High Antibacterial Activity Against Multiple Gram-Negative Microbes The antimicrobial activity of nanoparticles: Present situation and prospects for the future Nanomaterials for alternative antibacterial therapy Green synthesis of metallic nanoparticles as effective alternatives to treat antibiotics resistant bacterial infections: A review Nanoparticles in the Treatment of Infections Caused by Multidrug-Resistant Organisms Antiquorum sensing and antibacterial activity of silver nanoparticles synthesized by mutant Klebsiella pneumoniae MTCC 3354 Antifungal activity of silver nanoparticles obtained by green synthesis Antifungal activity of silver nanoparticles in combination with ketoconazole against Malassezia furfur The antifungal effect of silver nanoparticles on Trichosporon asahii Antifungal silver nanoparticles: Synthesis, characterization and biological evaluation Synergistic Antifungal Activity of Green Synthesized Silver Nanoparticles and Epoxiconazole against Setosphaeria turcica A combination of silver nanoparticles and visible blue light enhances the antibacterial efficacy of ineffective antibiotics against methicillin-resistant Staphylococcus aureus (MRSA) Ballesté-Delpierre, C. Current landscape in the discovery of novel antibacterial agents Emerging Concern for Silver Nanoparticle Resistance in Acinetobacter baumannii and Other Bacteria Assessment of the effectiveness of silver-coated dressing, chlorhexidine acetate (0.5%), citric acid (3%), and silver sulfadiazine (1%) for topical antibacterial effects against the multi-drug resistant Pseudomonas aeruginosa infecting full-skin thickness Novel Pemulen/Pullulan blended hydrogel containing clotrimazole-loaded cationic nanocapsules: Evaluation of mucoadhesion and vaginal permeation Control of Klebsiella pneumoniae Infection in Mice by Using Dissolving Microarray Patches Containing Gentamicin Bacterially sensitive nanoparticle-based dissolving microneedles of doxycycline for enhanced treatment of bacterial biofilm skin infection: A proof of concept study Integrated antimicrobial and nonfouling hydrogels to inhibit the growth of planktonic bacterial cells and keep the surface clean Nanotechnology as a therapeutic tool to combat microbial resistance Dissolving microneedle-mediated dermal delivery of itraconazole nanocrystals for improved treatment of cutaneous candidiasis Bioadhesive-Thermosensitive in Situ Vaginal Gel of the Gel Flake-Solid Dispersion of Itraconazole for Enhanced Antifungal Activity in the Treatment of Vaginal Candidiasis Sustained release nitric oxide releasing nanoparticles: Characterization of a novel delivery platform based on nitrite containing hydrogel/glass composites Switch over from intravenous to oral therapy: A concise overview Oral or intravenous antibiotics? Aust Green Formulation of Microbial Biopolyesteric Nanocarriers Toward In vitro Drug Delivery and Its Characterization Fast-dissolving antibacterial nanofibers of cyclodextrin/antibiotic inclusion complexes for oral drug delivery Development of poly-L-lysine multi-functionalized muco-penetrating self-emulsifying drug delivery system (SEDDS) for improved solubilization and targeted delivery of ciprofloxacin against intracellular Salmonella typhi Microencapsulation of Bacteriophages Using Membrane Emulsification in Different pH-Triggered Controlled Release Formulations for Oral Administration A solid doxycycline HP-β-CD formulation for reconstitution (i.v. bolus) prepared by scaled-up electrospinning Antibiotic administration routes significantly influence the levels of antibiotic resistance in gut microbiota Development, characterization and pharmacokinetics of mupirocin-loaded nanostructured lipid carriers (NLCs) for intravascular administration Strategies Used by Bacteria to Grow in Macrophages. Myeloid Cells Health Dis Antibacterial nanotruffles for treatment of intracellular bacterial infection Inhaled formulations and pulmonary drug delivery systems for respiratory infections Pulmonary drug delivery. Part I: Physiological factors affecting therapeutic effectiveness of aerosolized medications Aerosol drug delivery: Developments in device design and clinical use Dry Powder Inhaler Formulation A triple combination 'nano' dry powder inhaler for tuberculosis: In vitro and in vivo pulmonary characterization Solvato-)polymorphism of formulations of rifampicin for pulmonary drug delivery prepared using a crystallization/spray drying process Development and characterization of meropenem dry powder inhaler formulation for pulmonary drug delivery Development of levofloxacin-loaded PLGA microspheres of suitable properties for sustained pulmonary release Chemically cross-linked and grafted cyclodextrin hydrogels: From nanostructures to drug-eluting medical devices Sosnik, A. β-Cyclodextrin hydrogels for the ocular release of antibacterial thiosemicarbazones Characterization of the physicochemical, antimicrobial, and drug release properties of thermoresponsive hydrogel copolymers designed for medical device applications A thermoresponsive antimicrobial wound dressing hydrogel based on a cationic betaine ester Antimicrobial and healing efficacy of sustained release nitric oxide nanoparticles against Staphylococcus aureus skin infection Chitosan-based nitric oxide-releasing dressing for anti-biofilm and in vivo healing activities in MRSA biofilm-infected wounds Selective delivery of silver nanoparticles for improved treatment of biofilm skin infection using bacteria-responsive microparticles loaded into dissolving microneedles Versatility of hydrogel-forming microneedles in in vitro transdermal delivery of tuberculosis drugs Solid lipid nanoparticle-based dissolving microneedles: A promising intradermal lymph targeting drug delivery system with potential for enhanced treatment of lymphatic filariasis Recent advances in combination of microneedles and nanomedicines for lymphatic targeted drug delivery Enhancement in site-specific delivery of carvacrol for potential treatment of infected wounds using infection responsive nanoparticles loaded into dissolving microneedles: A proof of concept study Preparation and characterization of transdermal mediated microemulsion delivery of T4 bacteriophages against E.coli bacteria: A novel anti-microbial approach Ex vivo and in vivo evaluation of microemulsion based transdermal delivery of E. coli specific T4 bacteriophage: A rationale approach to treat bacterial infection Transdermal delivery of gentamicin using dissolving microneedle arrays for potential treatment of neonatal sepsis Transdermal delivery of vancomycin hydrochloride using combination of nano-ethosomes and iontophoresis: In vitro and in vivo study Development, Evaluation, and Pharmacokinetic Assessment of Polymeric Microarray Patches for Transdermal Delivery of Vancomycin Hydrochloride Thermosensitive hydrogels for vaginal delivery of secnidazole as an approach to overcome the systemic side-effects of oral preparations Funding: This research received no external funding. Data Availability Statement: Available data are presented in the manuscript. The authors declare no conflict of interest.