key: cord-0985147-b5c7ufoh authors: Sharma, Hemraj; Sharma, Arjun; Sharma, Bimala; Karna, Sonu title: Green Analytical Approach for the Determination of Zinc in Pharmaceutical Product Using Natural Reagent date: 2022-04-23 journal: Int J Anal Chem DOI: 10.1155/2022/8520432 sha: ab9cb195e272bdddd5b674e2e743f32d6e49f94e doc_id: 985147 cord_uid: b5c7ufoh A selective, sensitive, and environmentally safe spectrophotometry method was developed and validated for the determination of zinc in pharmaceutical substances using natural reagents obtained from the leaves of plant Acacia catechu. Different factors were optimized such as volume of reagent, selection of pH, and stability of the color complex. The drug showed a stable yellowish orange color complex at 550 nm. The greenness of the methods was estimated using an eco-scale tool where the presented method was found to be excellent green with an ecoscore of 84 based on spectrophotometric determination. Also, the greenness of the method was assessed by the Green Analytical Procedure Index and found to be eco-friendly. The method was validated in conformance with ICH guidelines, with acceptable values for linearity, accuracy, precision, LOD, and LOQ. The linearity range for zinc sulphate was 5–25 μg mL(−1) with an R(2) value of 0.996. The % RSD for intraday precision and interday precision was less than 2%. The suggested method can be employed for the economic analysis of zinc in its pure form and various formulations. The presented spectrophotometric method is the first analytical method for the analysis of zinc present in zinc sulphate and showed greater ecoscale as compared to the official method. Zinc is the second most essential trace element in all residing structures, from animals to humans, and performs a crucial function in lots of metabolic procedures in the body [1] . Each day's nutritional consumption of zinc is crucial to adjust the cell division through regulating the synthesis of protein and DNA [2] . e importance of zinc in human nutrients and public health has become recognized distinctly recently. Zinc insufficiently has been diagnosed by some professionals as a crucial public health issue, particularly in growing countries. e prevalence and medical results of zinc deficiency consist of growth delay, diarrhoea, pneumonia, disturbed neuropsychological overall performance, and abnormalities in foetal development [3] . Zinc deficiency has been observed in lots of illnesses which include sickle cell anaemia, kidney disease, and gastrointestinal disorders. It also can make contributions to disruptions inside the immune system that accompany those diseases. In fact, a current study at Michigan State University in East Lansing suggests that the immune structures of animals given good enough zinc for a month reduce ineffectiveness by30 to 80%. [4] . In the current scenario, zinc emerges as an essential element of preference for the control of COVID-19 signs and symptoms in conjunction with anti-infective and different antiparasitic drugs [5] . Few analytical techniques have been mentioned for the assay of zinc, which encompass spectrophotometric methods [6] [7] [8] , HPLC [9, 10] , polarography [11, 12] , potentiometry [13] [14] [15] [16] [17] , flame AAS [18] [19] [20] [21] [22] [23] , and mass spectrometry [24] [25] [26] [27] [28] [29] [30] [31] . e literature review revealed that the complexometric titration is used for the analysis of zinc (zinc sulphate) through pharmacopoeial techniques [32] , wherein huge quantities of organic compounds such as hexamine and acetic acid are used. It is a destructive technique and makes use of a big amount of sample being analyzed, big chemical waste, limited accuracy, and greater risk of human error. Similarly, the stated different techniques are afflicted by lack of sensitivity and consume huge quantities of organic solvents that harm the surroundings and raise the cost. HPLC and different electrochemical techniques such as polarography and potentiometry are the most regularly used and well-advanced techniques for both qualitative and quantitative analysis. However, most of the electrochemical and chromatographic applications use hazardous solvents and generate big quantities of poisonous waste that impact the surroundings. Recently, the Society of Analytical Chemistry has been growingly in search of the implementation of green techniques that take away or lower poisonous and corrosive waste [33] . Evaluation of analytical techniques greenness is profoundly critical and highly interesting to maximum method developers. One of the modern day used greenness valuation tools for analytical strategies is the analytical ecoscale [34] that is a semiquantitative tool to assess and evaluate analytical techniques primarily based totally on their conformity with green chemistry principles [35] . e ecoscale tool reflects many elements that may have unfavourable influences on the environment, which include the magnificence and quantity of any chemical used within side the procedure, the mass of generated waste, occupational exposure, and power consumption [36] . UV spectrophotometry has huge applications within side the area of pharmaceutical analysis, both for identity and for quantitative analysis of various drugs. e principal purpose of the existing study is to establish a tremendously simple, sensitive, legitimate, and cheaper green analytical method for the determination of zinc sulphate within side the pure form using natural reagents received from Acacia catechu which limits the use of chemicals and is a cost-effective technique. e green analytical technique is a fast, economical, and environment friendly technique. It might be an amazing alternative technique of extraction that allows decreasing the usage of chemical reagent which might assist to lessen the waste and allows the use of renewable sources. Extraction. Acacia catechu leaves after collection were cleaned, washed with deionized water, dried at room temperature, and then cut into small pieces and shade dried. e dried leaves were ground to fine powder form using a blender machine and then homogeneously mixed and stored in a dry place until required for use. e extraction of 1 kg of dried powder of the Acacia catechu leaves was carried out by a cold maceration process using various solvents such as water, methanol, and acetone. e extracts were then filtered through muslin cloth and Whatman filter paper. e filtrates were concentrated under reduced pressure to obtain residues. After evaporation, the extractive value for each extract was calculated by using the following formula: Plant powder (50 g) and deionized water (100 mL) were stirred in an extraction flask for 30 minutes. e extract was filtered through a filter paper and made up to a volume of 100 mL with de-ionized water. e preparation of the dried powder of Acacia catechu and reagent is shown in Figure 1 (a) and Figure 1 (b), respectively. e proposed method was developed as per Kumar Reddy et al. [37] . e wave length maximum was selected by varying the wavelength from 400 nm to 800 nm and reading each absorbance value of every wavelength in the spectrophotometry directly where 550 nm gave the maximum absorbance value and was selected as the desired wavelength. e pH was selected by making the acetate buffer pH 3.7 to 6. e pH of the acetate buffer to be added was optimized. e volume optimization was carried out by varying the volume from 2-5 mL. Zinc sulphate and natural reagent obtain from Acacia catechu were allowed to react to form the colour complex, as metal ion (zinc) reacts with ligand molecule (plant's polyphenols) to form colour complex. Acacia catechu contains phenolic hydroxyl groups which react with zinc sulphate to form a yellowish orange colour complex. e idea of color development was taken from Siriangkhawut et al. [38] , with some modifications where instead of iron, zinc was taken as the metal of analysis. e possible reaction for the development of colour is described in Figure 2 . Various phytochemical tests were performed for the fresh fruit extracts and marketed juices. e samples were tested for the presence of active principles such as triterpenoids, glycosides, alkaloids, saponins, carbohydrates, flavonoids, tannins, phenols, vitamin C, and protein. e phytochemical screening was performed by following standard procedures [39, 40] . e Folin-Ciocalteu method was used for the determination of total phenol [41] . e total phenol content is expressed as milligram of gallic acid equivalent per gram of dry extract weight using the calibration curve of gallic acid (50 mg·L −1 -400 mg·L −1 ) standards. Four different formulations of zinc sulphate were used and 20 tablets from each formulation were used and powdered and average weight of powder was taken and dissolved in a 100 ml volumetric flask and the filtered concentration was made up to 9 μg·mL −1 . Leaves. e main components in Acacia catechu leaf are phenolic compounds [42] . e type of solvent has a strong impact on the yield of extraction. In this study, different International Journal of Analytical Chemistry polar solvents such as water, methanol, ethanol, and acetone were investigated. e total phenolic content (as tannic acid) of each extract was evaluated. e methanol extract gave the highest tannic acid (8.3 g 100 g −1 ). e total phenolic contents (as tannic acid) for water and acetone were 7.18, and 3.94 g 100 g −1 , respectively. Water extract of the leaves yields an appreciable amount of phenolic compounds which is nearly equal to methanol. Hence, to make it green and increase its analytical ecoscale value, water extract was used for the rest of the analysis instead of methanol. A natural reagent obtained from Acacia catechu was allowed to react with zinc sulphate along with acetate buffer to form a reddish product with an absorption maxima of 550 nm. e optimization of the research was first established by varying the volume of reagent (2 to 6 mL), selection of pH, and stability of the complex. e optimization of the research was first established by varying the volume of reagent (2 to 6 mL), where we found maximum absorbance at 5 mL. Hence, it was selected as optimized volume of the reagent, as shown in Table 1 . After optimizing the volume of reagent, the drug (zinc sulphate) and reagent were mixed to develop the colour. e optimum time for completion of the reaction between zinc sulphate and natural reagent obtained from Acacia catechu was 1 min, and the colour complex was stable for 6 hours ( Table 2) and absorbance was measured. It was quite stable with precise measurement. After optimization of the volume of reagent, the acetate buffer of pH 3.7 to 6 was made and absorbance was observed. On increasing the pH from 3.7 to 6, there was a corresponding increase in absorbance up to pH 5, but at pH 6, turbid solutions were observed. Amongst all, pH 5 gave the maximum absorbance and it was selected as the optimized pH for the analysis which is shown in Table 3 . e phytochemical screening was carried out on Acacia catechu leaves, and the results are shown in Table 4 . e color development in this method was possible only due to the positive test for phenols. e total phenolic content, determined by the Folin-Ciocalteu method, gives an idea about the plant's phenolic hydroxyl groups reacting with the Folin-Ciocalteu reagent. e standard gallic acid calibration curve (50 μg·mL −1 -500 μg·mL −1 ) was used to estimate the total phenol content of the extracts, as shown in Figure 3 . e content of phenolic compounds in plant extracts was found to be 35.25 μg·mL −1 . Validation of the proposed spectrophotometric method was performed according to ICH guidelines [43] . International Journal of Analytical Chemistry e colored complex of the zinc sulphate with natural reagent was analyzed using a UV-Visible spectrophotometer and the absorbance of all multiple standards was taken to construct a calibration curve, as shown in Figure 4 . e linearity with the regression plot in the concentration range of 5-25 μg·mL −1 showed a good relation with a correlation coefficient (R 2 ) of 0.996. e data for intraday and interday precision for absorbance studies were obtained from three different concentrations of 6, 9, and 12 μg·mL −1 in linearity. e % RSD values for intraday and interday precision were less than 2, and the result is as shown in Table 5 . e accuracy of the method was evaluated in triplicate at three concentration levels, i.e., 80%, 100%, and 120% of the test concentration (9 μg·mL −1 ). e percentage of recoveries was calculated and shown in Table 6 . e limit of detection (LOD) and limit of qualification (LOQ) for the procedure were performed on samples containing concentrations of LOD (0.770 μg·mL −1 ) and LOQ (2.33 μg·mL −1 ), respectively. e robustness of the proposed method was also determined by changing the λ max of the analysis (λ max 550 nm) by ±1.0 nm and % mean recovery was reported which was found to be in between 98.9-101.95 ± 0.008, indicating it to be a sufficiently robust method. e assay procedure was performed in triplicate and the percentage of drugs found in the formulation and the mean and standard deviation in the formulation were calculated and are shown in Table 7 . Spectrophotometric Method 3.6.1. Assessment Using Analytical Ecoscale. e analytical eco-scale assessment is an excellent semiquantitative method applied to assess the greenness profile of the analytical methods. According to penalty points, the total score of the method is calculated. e perfect green method has an ecoscale score of 100. Excellent and fair green methods have total scores of more than 75 and 50, respectively. If the method has a score of less than 50, it is called the deficient green method [44] . e ecoscale score of the introduced method is 84, as detailed in Table 8 . Penalty points have been established for every of the 4 main parameters of the analytical technique that depart from the appropriate green analysis: the quantity of solvents, hazardousness, energy depletion, and waste production penalty points for hazards rely upon the Globally Harmonized System of Classification and Labeling of Chemicals (GHS). e hazardous properties of the reagents have been labelled primarily based totally International Journal of Analytical Chemistry on GHS class as "danger" or "warning" via one or greater of 9 graphical pictograms assigned via GHS [34] . e analytical ecoscale rating was established for the recommended spectrophotometric technique and the official complexometric technique [32] and evaluation was carried out among them, as proven in Table 8 . It explored that the proposed approach had a score of 84, and hence it proved to be a tremendous green analytical technique. Unlike the official one [32] , which had a score of 66, taking into consideration fair green analytical technique. (GAPI) . GAPI [45, 46] is another qualitative method, used to measure the greenness based upon the stages involved in an analytical method. GAPI focuses on two aspects: (I) sample preparation and (II) instrumentation assessment. e GAPI tool uses a pictogram to classify the greenness of each stage of an analytical procedure, using a color scale with three levels of evaluation for each stage. In GAPI, a specific symbol with five pentagrams is used to evaluate and quantify (from green through yellow to red) the low, medium, and high environmental impact involved for each step of the methodology. Each field reflects a different aspect of the described analytical procedure and the field is filled green if certain requirements are met. e application of GAPI in the proposed method is given in Table 9 , and the pictogram is represented in Figure 5 , which shows the method has satisfied most of the criteria and confirms the proposed method as eco-friendly. e presented spectrophotometric method is the first analytical method for the analysis of zinc in zinc sulphate. Its ability for quantification of the studied drugs in pharmaceutical products gives it the advantage of being an excellent green, sensitive, and cost-effective spectrophotometric method. Being aliphatic drug, assessment of zinc sulphate was a great challenge which was resolved by simple derivatization method using natural reagent. Validation of the proposed method followed ICH guidelines, allowing application of the suggested method for determination of the studied drugs in Waste generated by the proposed method were 1-10 mL. Waste treatment Low degradation Yellow Additional mark: quantification ring in the middle of GAPI: procedure for quantification. Figure 5 : Assessment of proposed method by GAPI. 6 International Journal of Analytical Chemistry pharmaceutical products. Moreover, ecological evaluation of the presented spectrophotometric method using the ecoscale, GAPI assessment method affirmed its ecosafety. e data used to support the findings of this study are included within the article. e authors declare that there are no conflicts of interest regarding the publication of this article. e role of zinc in life: a review South-east Asia multi-country trial on iron and zinc supplementation in infants Development of a slurry introduction method for multi-element analysis of antibiotics by inductively coupled plasma atomic emission spectrometry using various types of spray chamber and nebulizer configurations e dynamic link between the integrity of the immune system and zinc status Does zinc supplementation enhance the clinical efficacy of chloroquine/hydroxychloroquine to win today's battle against COVID-19? A spectrophotometric method for the determination of zinc, copper, and cobalt ions in metalloproteins using zincon Simultaneous determination of zinc (II), manganese (II) and iron (II) in pharmaceutical preparations Simultaneous determination of zinc (II) and cobalt (II) by first order derivative spectrophotometry in triton X-100 micellar media Study on determination of iron, cobalt, nickel, copper, zinc and manganese in drinking water by solid-phase extraction and RP-HPLC with 2-(2-quinolinylazo)-5-diethylaminophenol as precolumn derivatizing reagent Simultaneous determination of nickel, lead, zinc, and copper in citrus leaves and rice flour by liquid chromatography with hexamethylenedithiocarbamate extraction Rapid and simultaneous determination of copper, cadmium, nickel, and cobalt in zinc electrolyte solutions by complex adsorption wave polarography Polarographic chemometric determination of zinc and nickel in aqueous samples Simultaneous determination of zinc, cadmium and lead in environmental water samples by potentiometric stripping analysis (PSA) using multiwalled carbon nanotube electrode Determination of copper, lead, cadmium and zinc content in commercially valuable fish species from the Persian Gulf using derivative potentiometric stripping analysis Determination of cadmium (II) and zinc (II) in olive oils by derivative potentiometric stripping analysis Determination of zinc, cadmium, lead and copper in sea water by means of computerized potentiometric stripping analysis Determination of copper, zinc, and selenium in human plasma and urine samples by potentiometric stripping analysis and constant current stripping analysis Determination of cadmium, copper, lead and zinc in water samples by flame atomic absorption spectrometry after cloud point extraction Optimization of microwave assisted digestion procedure for the determination of zinc, copper and nickel in tea samples employing flame atomic absorption spectrometry Flame atomic absorption spectrometric determination of zinc, nickel, iron and lead in different matrixes after solid phase extraction on sodium dodecyl sulfate (SDS)-coated alumina as their bis (2-hydroxyacetophenone)-1, 3-propanediimine chelates Flame atomic absorption spectrometric determination of copper, zinc and manganese after solid-phase extraction using 2,6-dichlorophenyl-3,3-bis(indolyl)methane loaded on amberlite XAD-16 Determination of calcium, magnesium and zinc in lubricating oils by flame atomic absorption spectrometry using a three-component solution Solidified floating organic drop microextraction for determination of trace amounts of zinc in water samples by flame atomic absorption spectrometry Precise analysis of copper and zinc isotopic compositions by plasma-source mass spectrometry Determination of cadmium and zinc in Alzheimer's brain tissue using inductively coupled plasma mass spectrometry A new method for precise determination of iron, zinc and cadmium stable isotope ratios in seawater by double-spike mass spectrometry Determination of iron, cobalt, copper, zinc, rubidium, molybdenum, and cesium in human serum by inductively coupled plasma mass spectrometry Determination of zinc in individual airborne particles by inductively coupled plasma mass spectrometry with digital signal processing Determination of zinc to beta-peptide binding constants with electrospray ionization mass spectrometry Determination of calcium, iron and zinc in milk powder by reaction cell inductively coupled plasma mass spectrometry Determination of nickel, copper, zinc, silver, cadmium and lead in seawater by isotope dilution inductively coupled plasma mass spectrometry Indian Pharmacopoeia Commission, Indian Pharmacopoeia Green analytical chemistry Analytical eco-scale for assessing the greenness of analytical procedures Green HPTLC-densitometric approach for simultaneous determination and impurity-profiling of ebastine and phenylephrine hydrochloride Green chemistry metrics with special reference to green analytical chemistry A simple colorimetric method for the determination of raloxifene hydrochloride in pharmaceuticals using modified romini's reagent A green colorimetric method using guava leaves extract for quality control of iron content in pharmaceutical formulations Phytochemical screening and antioxidant activities of some selected medicinal plants used for malaria therapy in Southwestern Nigeria Total phenolic content and antioxidant and antibacterial activities of Pereskia bleo Phenolic compounds from the aqueous extract of Acacia catechu Validation of analytical procedures: text and methodology Q2 (R1) Eco-scale, a semiquantitative tool to select an organic preparation based on economical and ecological parameters Eco-friendly estimation of isosorbide dinitrate and hydralazine hydrochloride using green analytical quality by design-based UPLC method Environmental impact of greenness assessment tools in liquid chromatography-a review