key: cord-0984360-86irq6yz
authors: Tan, Evan; Chin, Cara Sze Hui; Lim, Zhi Feng Sherman; Ng, Say Kong
title: HEK293 Cell Line as a Platform to Produce Recombinant Proteins and Viral Vectors
date: 2021-12-13
journal: Front Bioeng Biotechnol
DOI: 10.3389/fbioe.2021.796991
sha: e0e25f9ab56a90d48117f7d93b37af3a373d8d7a
doc_id: 984360
cord_uid: 86irq6yz

Animal cell-based expression platforms enable the production of complex biomolecules such as recombinant proteins and viral vectors. Although most biotherapeutics are produced in animal cell lines, production in human cell lines is expanding. One important advantage of using human cell lines is the increased potential that the resulting biotherapeutics would carry more “human-like” post-translational modifications. Among the human cell lines, HEK293 is widely utilized due to its high transfectivity, rapid growth rate, and ability to grow in a serum-free, suspension culture. In this review, we discuss the use of HEK293 cells and its subtypes in the production of biotherapeutics. We also compare their usage against other commonly used host cell lines in each category of biotherapeutics and summarise the factors influencing the choice of host cell lines used.

Production of complex biopharmaceutical products rely heavily on mammalian cell lines, with most therapeutic biopharmaceuticals produced in the Chinese hamster ovary (CHO) cells (Lalonde and Durocher, 2017) . The use of mammalian production cells enables biologics with complex posttranslational modifications (PTMs) to be produced. Complex biologics such as antibodies, growth and clotting factors require complex PTMs to ensure product stability and potency. However, not all biopharmaceutical products can be produced in CHO. Some recombinant proteins are made in HEK293 due to requirements in PTMs which cannot be met in CHO, and most therapeutic viral vectors are produced in HEK293. Since 2015, there have been seven HEK-derived products approved by the FDA (Table 1) . Of these, six are cell and gene therapies (Mullard, 2016 , Mullard, 2017 Mullard, 2018; Mullard, 2019; Mullard, 2020; Mullard, 2021) where the HEK293 cell line or its derivatives were used in the production of viral vectors. With the increasing number of cell and gene therapies being developed (Rittié et al., 2019; Lapteva et al., 2020) , we will see a corresponding growth in the use of HEK293 in viral vector production.

The HEK293 cell line was established by transforming human embryonic kidney cells with sheared adenovirus type 5 DNA (Graham et al., 1977) . Since then, many subtypes and derivatives have been established, with HEK293, HEK293-T, and HEK293-F frequently used in the production of biopharmaceuticals (Yuan et al., 2018) . HEK293-T is a derivative of the HEK293 cell line, established by the expression of a temperature-sensitive SV40 T-antigen mutant (DuBridge et al., 1987) . Expression of the T-antigen allows plasmids which carry the SV40 origin of replication to replicate when transfected into the cell (DuBridge et al., 1987) .

HEK293-F cells are GIBCO ® brand cells, cloned from HEK293 and adapted to suspension culture in serum-free media.

Other notable HEK293 derivatives commonly used in recombinant protein production include HEK293-E and HEK293-6E. HEK293-E was established by the expression of Epstein-Barr nuclear antigen 1 (EBNA-1), which allows for episomal replication of plasmids with oriP. Similarly, the HEK293-6E cell line was established by the expression of a truncated EBNA-1, lacking Gly-Gly-Ala domain. HEK293-6E showed improved transient gene expression and cell growth compared to HEK293-E (Abaandou et al., 2021) .

Eukaryotic expression systems are used to produce complex recombinant protein with complex PTMs for proper protein function. The use of the HEK293 host cell eliminates issues of potential immunogenicity due to the presence of non-human PTMs (Durocher and Butler, 2009 ). Its ease of transfectability and relatively high protein productivity makes it a popular choice for small scale production of recombinant proteins for scientific studies (Abaandou et al., 2021) and its capability to adapt to a suspension free culture facilitates its use in large scale biotherapeutics production (Baldi et al., 2005; Dumont et al., 2015) .

Because of its ease of transfection, HEK293 is widely used for transient gene expression (TGE). Recombinant proteins can be produced quickly by transfecting HEK293 with readily available reagents such as calcium phosphate or polyethylenimine (PEI). Such transfection processes have been demonstrated in stirredtank bioreactors and have proved to be a good method for the rapid production of recombinant proteins for lab to pre-clinical use (Wurm and Bernard, 1999; Baldi et al., 2007) . HEK293E and HEK293-6E is widely used in TGE as the use of plasmids with Epstein-Barr virus oriP significantly improves TGE (Pham et al., 2006) . However, the main drawback of TGE in recombinant protein production is the need for large quantities of transfectiongrade plasmid DNA.

Stable producer cell lines are preferred for the large-scale production of recombinant proteins. The most recent HEK-produced recombinant protein therapeutic, NUWIQ ® , was produced in HEK293F cells. NUWIQ ® is a recombinant coagulation factor VIII (FVIII). It is produced by transfecting HEK293F cells with a B-domain deleted human FVIII expression construct. After stable transfectants were selected, clones exhibiting optimal production were selected for use (Casademunt et al., 2012; Kannicht et al., 2015) .

Protein production in producer cell lines can be increased by the use of gene amplification technology (Lai et al., 2013) . Use of the glutamine synthetase (GS)-mediated gene amplification and selection system has been demonstrated in HEK293 cells Chin et al., 2019) , and could improve recombinant protein production (Chin et al., 2019) . By coupling the expression of the recombinant human erythropoietin with glutamine synthetase in a bicistronic vector, erythropoietin expression was significantly improved after the sequential increase of methionine sulfoximine, a GS inhibitor (Chin et al., 2019) . Application of gene amplification technologies could expand the use of human cell lines, such as HEK293, in therapeutic recombinant protein production.

Host cells have a major impact on the glycosylation profile of the biotherapeutic produced (Goh and Ng, 2017) . In the case of NUWIQ ® , HEK293-produced rFVIII exhibited improved function and reduced immunogenicity over CHO or BHKproduced rFVIII as it is completely sulfated and devoid of antigenic Neu5Gc or a-Gal epitopes (Sandberg et al., 2012; Kannicht et al., 2013) . HEK293 cells exhibit a greater capacity for γ-carboxylation of glutamic acid and sulfation of tyrosine residues as compared to CHO cells. These PTMs are required for therapeutic glycoproteins such as Drotrecogin alfa and recombinant factor IX respectively (Dumont et al., 2015) . Although some biotherapeutics are still produced in human cell lines such as HEK293 due to specific PTM requirements, most complex recombinant glycoproteins are produced in CHO.

Amongst the mammalian expression platforms available in the biopharmaceutical industry, Chinese hamster ovary (CHO) cells are used to produce approximately 70% of recombinant biologics, especially monoclonal antibodies (Lalonde and Durocher, 2017) . CHO cells are widely used due to their high productivity, ability to be cultured in suspension, in a serum-free, chemically defined cell culture media. In addition, recombinant proteins produced in CHO carry human-like PTMs which improves bioactivity and reduces immunogenicity due to the absence of an α-galactose epitope (Lai et al., 2013) . Compared to HEK, CHO cells are not able to completely reproduce human glycostructures. This is because CHO cells do not express the enzymes β-galactoside α2,6-sialyltransferase, α1,3/4 fucosyl transferase or β-1,4-Nacetylglucosaminyltransferase III, which are expressed in human cell lines (Goh and Ng, 2017) . In addition, as they express cytidine monophosphate N-acetylneuraminic acid hydroxylase, glycoproteins produced in CHO carry the potentially immunogenic N-glycolylneuraminic acid (Tejwani et al., 2018) . As glycoproteins with desirable glycosylation profiles can exhibit higher potency, stability, half-life and reduced immunogenicity (Tejwani et al., 2018) , the advantage of HEK293 as a host cell line lies in the specific glycosylation profile requirement of the biotherapeutic product produced. This limitation in CHO can potentially be overcome by engineering cells capable of producing glycoproteins with desired glycosylation profiles (Tejwani et al., 2018; Nguyen et al., 2021) . Required and desirable glycosylation profiles can be engineered by the expression of enzymes found in humans (Nguyen et al., 2021) , or the knockout of enzymes absent in humans (Chai et al., 2020) . With these developments in CHO cell glycoengineering, we foresee a further decline in the use of HEK293 as host cells for therapeutic recombinant protein production.

HEK293 is commonly used in the production of viral vectors. It is used in the production of adenoviral and adeno-associated viral vectors due to presence of the adenoviral E1A/B genes which provide helper functions during viral vector production. In retroviral vector production, HEK293T is used due to the expression of the SV40 large T-antigen in the cell line. Expression of the T-antigen allows plasmids which carry the SV40 origin of replication to undergo replication when transfected into the cell (DuBridge et al., 1987) . It was also reported that expression of the large T-antigen improved lentiviral vector production (Gama-Norton et al., 2011) . However, the improved viral titers in HEK293T were not completely attributed to the effect of T-antigen on plasmid replication or transcriptional activity, suggesting that there are other indirect effects and characteristics of the cell line which enables high-titer retroviral vector production (Gama-Norton et al., 2011; Bae et al., 2020) .

Early viral vector production was challenging as production was performed by the transient transfection of adherent HEK293 cells in serum-containing media. Recent advancements in transient transfection technologies, cell line and media development have demonstrated that viral vector production can be performed using serum-free suspension-based transfection process in chemically defined cell culture medium. In addition, stable viral vector producer cell lines have been established. Together, these developments have enabled the scalable production of viral vectors in HEK293 cells.

Retroviral vectors are enveloped, single-stranded RNA viruses. In this family of viruses, γ-retroviruses (γRV) based on the Murine Leukemia Virus and lentiviruses (LV) based on the Human Immunodeficiency Virus type 1, are commonly used in gene therapies (Elsner and Bohne, 2017; Milone and O'Doherty, 2018) . These retroviruses are broadly classified according to their genome organisation into "simple" and "complex" retroviruses respectively (Weiss, 1996) . Simple retroviruses contain two separate populations of viral RNAs, where viral genomic RNA is distinct from mRNA. In complex retroviruses, viral genomic RNA functions as mRNA (Balvay et al., 2007) .

Retroviral vectors are one of the best tools for gene transfer due to its ability to transduce wide range of cell types (Ausubel et al., 2012) . Retroviral transduction can stably modify transduced cells as the retroviral RNA genome, which is converted to DNA by the retroviral reverse transcriptase, can be stably integrated into the host cell's genome. As LV vectors exhibit a less harmful integration profile compared to γRV vectors, they are more widely used in gene therapies (Mitchell et al., 2004; Elsner and Bohne, 2017) . Both γRVs and LVs have been used in the production of chimeric antigen receptor (CAR) T-cell therapies (Milone and O'Doherty, 2018) . Since 2017, there have been four FDA approved CAR-T therapies, Yescarta, Kymriah, Breyanzi, and Abecma.

For both γRV and LV vector production, different packaging systems have been developed with each successive generation developed aimed at reducing the risk for replication competent viruses (RCV). In γRV production, as the viral genes are noncytotoxic, packaging cell lines have been developed to facilitate γRV production. In third generation γRV packaging cell lines, gag-pro-pol genes, and the envelope protein are stably expressed in separate expression casettes. γRV production is then achieved by transfection of the packaging cell line with a single vector construct carrying the transgene-of-interest, the Ψ packaging signal, and a modified long terminal repeat (LTR) species to further minimize risk of RCV formation (Rodrigues et al., 2011) .

Cytotoxicity of LV genes has made it challenging to establish packaging or producer cell lines. Hence, a four-plasmid transient transfection workflow is widely utilised in the production of LV vectors (Ausubel et al., 2012) . The plasmids carry: 1) Gag-Pro-Pol which encodes viral structural proteins and enzymes; 2) Rev which expresses accessory proteins that is essential for viral genome nuclear exportation; 3) Env that encodes for the envelope glycoproteins which engage with cell receptors for cellular entry and; 4) Vector genome that carries the gene of interest (Tomás et al., 2018) .

Retroviral vectors are typically produced by the transient transfection of adherent HEK293T cells (Loo et al., 2012; Bauler et al., 2020) . However, scaling up production from monolayer flasks is time consuming, labour intensive and requires large workspaces for cell cultivation (Rout-Pitt et al., 2018) . To improve process scalability, several serum-free suspension-based production methods have been developed (Segura et al., 2007; Ansorge et al., 2009; Bauler et al., 2020) .

Frontiers in Bioengineering and Biotechnology | www.frontiersin.org December 2021 | Volume 9 | Article 796991

The suspension-based production methods demonstrated comparable volumetric productivities compared to adherentbased production methods (Table 2 and 3) . Despite the improvement in process scalability, retroviral vector production remains challenging. There are high costs incurred for good quality transfection-grade DNA and reagents involved (Merten et al., 2016) . In addition, the batch-to-batch variability and short production periods has led to the limitation in production of high-titer and consistent viral vectors (McCarron et al., 2016) . 

Stable producer cell lines have been generated to improve the scalability of γRV and LV production. Stable, suspension-adapted producer cell lines developed from packaging cell lines could produce yRVs in a serum-free medium have been developed to improve process scalability (Ghani et al., 2007) . Subsequently, yRVs producer cell lines for the safer, self-inactivating (SIN) yRVs have also been developed (Loew et al., 2010; Ghani et al., 2019) . SIN vectors were first developed by the modification of the U3 sequences of the 3 viral LTR, resulting in the loss of viral enhancer and promoter sequences upon integration in the transduced cell (Yu et al., 1986) This reduces the risk of RCV formation as the viral promoter and enhancers are absent, thus preventing vector mobilisation. In addition, when coupled with the use of weak internal promoters to drive the expression of the gene of interest, risk genotoxicity could be reduced (Modlich et al., 2006; Maetzig et al., 2011) . Stable LV producer cell line are challenging to develop due to the cytotoxicity of the genes required. This can be overcome by using less-cytotoxic viral protease mutants or envelope proteins (Tomás et al., 2018) or the use of inducible expression systems (Stewart et al., 2009; Manceur et al., 2017; Chen et al., 2020) . The LentiPro26 stable lentiviral vector producer cell lines was developed by Tomás et al., demonstrated stable, constitutive LV production over a period of up to 2 months while maintaining a volumetric titer comparable to existing transient-transfection based production methods (Tomás et al., 2018) . Chen et al., demonstrated that stable producer cell lines can be rapidly generated by the transfection of a single DNA construct carrying all required lentiviral vector components, cutting down the time taken to generate and identify stable producing clones form 6 months in the LentiPro26 system (Tomás et al., 2018) , to approximately 4 months (Chen et al., 2020) . Further developments in stable γRV and LV production systems would improve γRV and LV productivities to meet the growing demand of these vectors in clinical gene therapy applications.

Adeno-associated viruses (AAV) are non-enveloped, singlestranded DNA viruses which have shown safety and efficacy as gene therapy vectors (Naso et al., 2017) . Since 2012, there have been three approved rAAV gene therapies, namely Glybera, Luxturna, and, most recently, Zolgensma.

Recombinant AAVs (rAAVs) are typically produced via the transient-transfection of adherent HEK293 cells with three plasmids containing: 1) Adenoviral helper factors, E4, E2a, and VARNA; 2) Adeno-associated virus rep and cap genes; and 3) Cargo gene flanked by AAV ITR sequences (Naso et al., 2017) . HEK293 cells are most frequently used for rAAV production due to the expression of adenoviral E1a/b genes (Graham et al., 1977) which are essential for AAV production (Richardson and Westphal, 1984) . Although the HeLa cell line was used for rAAV production in early studies (Tratschin et al., 1984) , HEK293 based cell lines are typically favored due to the expression of the adenoviral viral helper genes, E1A/B, which improves rAAV titers during production.

rAAVs can also be produced with the use of helper viruses (Clark, 2002) . Wild-type AAVs require co-infection with adenoviruses to undergo productive infection. Early rAAV production used a helper-virus production system whereby, rAAV production is achieved by the infection of host cells with recombinant helper viruses carrying the AAV rep, cap, and cargo genes (Clark, 2002) . Typically, two recombinant viruses are used, one carrying the rep and cap genes, and another carrying the cargo genes. This minimizes recombination, thus reducing the risk of wild-type AAV formation (Clark, 2002) . The use of helper-virus based rAAV production systems are not favoured due to the need to separate the helper-virus from the rAAVs during purification, and the need to demonstrate the absence of replication-competent viruses from the purified.

Although the production of rAAVs for the above therapeutics were performed in adherent-based systems, suspension-based rAAV production technologies have been also developed recently. rAAV production have been demonstrated in suspension adapted HEK293 cell lines with yields comparable to existing adherent-based production systems (Table 4 ) (Lock et al., 2010; Chahal et al., 2014; Grieger et al., 2016; Blessing et al., 2018; Strobel et al., 2019) . With a growing number of suspensionbased methods used for the production of rAAV therapeutics in clinical trials (Clément and Grieger, 2016) , we forsee the shift away from adherent-based production methods in favor of the more scalable, suspension-based production methods.

Stable producer cell lines have also been developed to improve the scalability of rAAV production. CEVEC pharmaceuticals have developed ELEVECTA ® producer cell lines where AAV production genes are stably expressed in CEVEC's amniocyte production (CAP) cells where gene expression is controlled by an inducible promoter. Scalable rAAV production is achieved simply by induction, without the use of helper viruses, transfection reagents or plasmids (CEVEC, 2020).

While rAAVs are commonly produced in HEK293-based systems, baculovirus-based systems have been developed showing comparable rAAV titers. The use of the baculovirus expression vector system for rAAV production was first described in 2002 (Urabe et al., 2002) where rAAV production was achieved with the co-infection of Spodoptera frugiperda (Sf9) cells with three recombinant baculoviruses, a Rep-baculovirus, a Capbaculovirus, and a Cargo ITR baculovirus, with the helper functions provided for by the baculovirus.

The OneBac rAAV production systems were developed to improve the scalability of the production system by reducing the number of required recombinant baculoviruses for production from three to one. This was achieved by generating Sf9 cell lines stably expressing the AAV rep and cap genes (Mietzsch et al., 2014 (Mietzsch et al., , 2015 (Mietzsch et al., , 2017 . This resulted in a more scalable production Frontiers in Bioengineering and Biotechnology | www.frontiersin.org December 2021 | Volume 9 | Article 796991 system with improved titers over HEK293-based systems. Although the systems described demonstrated similar functionality between Sf9-produced and HEK293-produced rAAVs, a recent study identified the differences between rAAVs produced in both systems (Rumachik et al., 2020) . The rAAV capsids produced in Sf9 cells had different post translational modifications compared to those produced in HEK293 (Rumachik et al., 2020) . Genomes of rAAVs produced in HEK293 cells exhibited methylation patterns indicative of increased vector potency (Rumachik et al., 2020) . Although only serotypes AAV1 and AAV8 were tested, this suggests that HEK293-produced rAAVs are preferred due to the improved vector potency. Unless future serotypes assessed demonstrates that Sf9-produced rAAVs could have improved vector potency, rAAV production in HEK293 would be preferred.

Adenoviruses (AdV) are non-enveloped, double-stranded DNA viruses. It was first used as a gene therapy vector as they possess high genomic capacity, high transduction efficiency and were non-integrating with high epichromosomal persistence (Bulcha et al., 2021) . However, their applicability is limited in gene therapies limited due to a fatal systemic inflammatory response following AdV gene transfer (Raper et al., 2003) .

Although the use of AdVs in gene therapies have declined due to this unfortunate incident, AdVs have seen a resurgent use in applications where an immunological response is desired. The capacity to induce a strong immune response has led to the development of vaccine candidates for infectious diseases and cancer immunotherapies (Mendonça et al., 2021) . AdVs now constitute majority of viral vectors in clinical trials with its predominant application as vaccines or in cancer therapies (Bulcha et al., 2021) . The COVID-19 pandemic drove the rapid development of adenoviral vectored vaccines and their eventual emergency use (Mendonça et al., 2021) . Of the three adenoviral vectored vaccines approved for emergency use by the World Health Organisation (as of August 2021), Ad5-nCOV (Zhu et al., 2020) and ChAdOX1-nCoV (Doremalen et al., 2020) are produced in HEK293 cells, while Ad26. COV2-S is produced in PER. C6 cells (Bos et al., 2020) . These cells are utilised to produce of AdV vectors due to the need for transcomplementation of viral vector genes in the production cell lines.

First generation AdV vectors are produced by the substitution of the E1 and/or E3 regions with an expression cassette. E1 gene products which are necessary for viral production, are provided for in trans in production cell lines such as HEK293 or PER. C6. Products from the E3 gene region are not essential for viral replication and hence, does not need to be complemented. Due to the expression of other viral proteins, first-generation adenoviral vectors provoke an immune response. In the case of a vaccine, the immune response elicited is particularly advantageous (Danthinne and Imperiale, 2000) .

Subsequent generation of AdV vectors involve the removal of viral genes to minimize the immune response elicited from the use of these vectors in vivo. In second generation AdV vectors, additional genes required for viral replication have been inactivated. Virus production is performed in cell lines expressing the E2 and/or E4 gene products. Finally, in the third class of "gutless adenovirus", all viral genes have been removed except for the cis-acting DNA sequences required for viral DNA replication and packaging (Danthinne and Imperiale, 2000) . Advancements to these AdV production systems involve modifications to reduce sequence homology and thus, reducing the risk of generating wild-type AdV through random recombination events (Tripodi et al., 2021) or modifications to minimize transgene expression during viral propagation to improve viral production (Danthinne and Imperiale, 2000; Tripodi et al., 2021) .

Production of AdVs and AAVs require the transcomplementation of the adenoviral E1 genes in HEK293 cells. However, as HEK293 cells were generated using sheared AdV genomic DNA, the E1 gene carried DNA sequences with high homology to wild-type AdVs. Production of first-generation E1deleted adenoviral vectors in HEK293 cells resulted in the generation of RCV with E1 sequences regained, presumably resulting from homologous recombination (Hehir et al., 1996) . Despite the use of E1 and E3 deleted adenoviral vectors, formation of RCVs could not be eliminated (Lochmller et al., 1994) . To reduce homology, using a defined E1 gene region to transform a cell line would reduce the risk of generating wildtype AdV through random recombination events during AdV production. The PER. C6 cell line was established by the transfection of human embryonic retinal cells with a defined region of the Adenovirus type 5 E1 gene under the control of the human phosphoglycerate kinase promoter (Fallaux et al., 1998) . Production of E1-deleted adenoviral vectors in the PER. C6 cells did not result in the generation of replication competent viruses, allowing for the cost-effect production of AdV vectors. Akin to PER. C6 cells, CEVEC's CAP cells were immortalized with a vector containing E1 and pIX of AdV 5, for the purpose of high titer production of replication-deficient adenoviral vectors without the accidental formation of RCVs (Schiedner et al., 2000) . AdV production might be preferred in these cell lines over HEK293 due to the decreased risk of accidental RCV formation.

The human cell line, HEK293, have emerged to be the main production platform for therapeutic viral vectors. Advancements in cell line developments would see more HEK293 clones or derivatives developed for growth in a serum-free suspension medium for high-titer viral vector production. Current examples include the commercially available LV and AAV vector production workflow offered by Thermo Fisher Scientific, where their HEK293-derived Viral Production Cells (VPC) are used in the LV-MAX TM system and the upcoming VPC 2.0 used in their prototype AAV-MAX system.

Future of viral vector production technologies leans towards development of stable cell lines for AAV, LV and yRV production. Such processes enable the production of viral vectors without the need to use costly reagents required for transfection. In stable producer cell lines, process developments in CHO resulted in a 10-20 fold improvement in glycoprotein production (Hacker et al., 2009; Kunert and Reinhart, 2016) . Advancements in HEK293 cell culture media development and process technologies could lead to a similar improvement of viral vector production in stable production systems.

SKN initiated the manuscript. SKN, ET, CC, ZFL contributed to writing the manuscript. All authors read and approved the final manuscript.

This review is supported by the Agency for Science, Technology and Research (A*STAR), grant numbers H1701a0012 and I21D1AG026.

Affecting HEK293 Cell Growth and Production Performance by Modifying the Expression of Specific Genes

Development of a Scalable Process for High-Yield Lentiviral Vector Production by Transient Transfection of HEK293 Suspension Cultures

Production of CGMP-Grade Lentiviral Vectors

Design and Testing of Vector-Producing HEK293T Cells Bearing a Genomic Deletion of the SV40 T Antigen Coding Region

Recombinant Protein Production by Large-Scale Transient Gene Expression in Mammalian Cells: State of the Art and Future Perspectives

Transient Gene Expression in Suspension HEK-293 Cells: Application to Large-Scale Protein Production

Translational Control of Retroviruses

Production of Lentiviral Vectors Using Suspension Cells Grown in Serum-free Media

Scalable Production of Aav Vectors in Orbitally Shaken Hek293 Cells

Ad26 Vector-Based COVID-19 Vaccine Encoding a Prefusion-Stabilized SARS-CoV-2 Spike Immunogen Induces Potent Humoral and Cellular Immune Responses

Viral Vector Platforms within the Gene Therapy Landscape

The First Recombinant Human Coagulation Factor VIII of Human Origin: Human Cell Line and Manufacturing Characteristics

Production of Adeno-Associated Virus (AAV) Serotypes by Transient Transfection of HEK293 Cell Suspension Cultures for Gene Delivery

Knockout of Cytidine Monophosphate-N-Acetylneuraminic Acid Hydroxylase in Chinese Hamster Ovary Cells by CRISPR/Cas9-based Gene-Editing Technology

Rapid Lentiviral Vector Producer Cell Line Generation Using a Single DNA Construct

A Human Expression System Based on HEK293 for the Stable Production of

Recent Advances in Recombinant Adeno-Associated Virus Vector Production

Manufacturing of Recombinant Adeno-Associated Viral Vectors for Clinical Trials

Production of First Generation Adenovirus Vectors: a Review

Analysis of Mutation in Human Cells by Using an Epstein-Barr Virus Shuttle System

Human Cell Lines for Biopharmaceutical Manufacturing: History, Status, and Future Perspectives

Expression Systems for Therapeutic Glycoprotein Production

The Retroviral Vector Family: Something for Everyone

New Helper Cells and Matched Early Region 1-Deleted Adenovirus Vectors Prevent Generation of Replication-Competent Adenoviruses

Lentivirus Production Is Influenced by SV40 Large T-Antigen and Chromosomal Integration of the Vector in HEK293 Cells

Generation of High-Titer Self-Inactivated γ-Retroviral Vector Producer Cells

Generation of a High-Titer Packaging Cell Line for the Production of Retroviral Vectors in Suspension and Serum-free media

Impact of Host Cell Line Choice on Glycan Profile

Characteristics of a Human Cell Line Transformed by DNA from Human Adenovirus Type 5

Production of Recombinant Adeno-Associated Virus Vectors Using Suspension HEK293 Cells and Continuous Harvest of Vector from the Culture Media for GMP FIX and FLT1 Clinical Vector

25 Years of Recombinant Proteins from Reactor-Grown Cells -where Do We Go from Here?

Molecular Characterization of Replication-Competent Variants of Adenovirus Vectors and Genome Modifications to Prevent Their Occurrence

A New Recombinant Factor VIII: from Genetics To clinical Use

Characterisation of the post-translational Modifications of a Novel, Human Cell Line-Derived Recombinant Human Factor VIII

Advances in Recombinant Antibody Manufacturing

Advances in Mammalian Cell Line Development Technologies for Recombinant Protein Production

Therapeutic Glycoprotein Production in Mammalian Cells

Clinical Development of Gene Therapies: The First Three Decades and Counting

Emergence of Early Region 1-Containing Replication-Competent Adenovirus in Stocks of Replication-Defective Adenovirus Recombinants (ΔE1 + ΔE3) during Multiple Passages in 293 Cells

Rapid, Simple, and Versatile Manufacturing of Recombinant Adeno-Associated Viral Vectors at Scale. Hum

A New PG13-Based Packaging Cell Line for Stable Production of Clinical-Grade Self-Inactivating γ-retroviral Vectors Using Targeted Integration

Gammaretroviral Vectors: Biology, Technology and Application. Viruses

Scalable Lentiviral Vector Production Using Stable HEK293SF Producer Cell Lines. Hum

Challenges of Up-Scaling Lentivirus Production and Processing

Adenoviral Vector Vaccine Platforms in the SARS-CoV-2 Pandemic

Production of Lentiviral Vectors

OneBac 2.0:Sf9 Cell Lines for Production of AAV5 Vectors with Enhanced Infectivity and Minimal Encapsidation of Foreign DNA. Hum

OneBac: Platform for Scalable and High-Titer Production of Adeno-Associated Virus Serotype 1-12 Vectors for Gene Therapy

OneBac 2.0:Sf9 Cell Lines for Production of AAV1, AAV2, and AAV8 Vectors with Minimal Encapsidation of Foreign DNA

Clinical Use of Lentiviral Vectors

Retroviral DNA Integration: ASLV, HIV, and MLV Show Distinct Target Site Preferences

Cell-culture Assays Reveal the Importance of Retroviral Vector Design for Insertional Genotoxicity

2015 FDA Drug Approvals

2016 FDA Drug Approvals

2017 FDA Drug Approvals

2018 FDA Drug Approvals

2019 FDA Drug Approvals

2020 FDA Drug Approvals

Adeno-Associated Virus (AAV) as a Vector for Gene Therapy

Frontiers in Bioengineering and Biotechnology | www.frontiersin.org

Multiplexed Engineering Glycosyltransferase Genes in CHO Cells via Targeted Integration for Producing Antibodies with Diverse Complex-type N-Glycans

Fatal Systemic Inflammatory Response Syndrome in a Ornithine Transcarbamylase Deficient Patient Following Adenoviral Gene Transfer

Requirement for Either Early Region 1a or Early Region 1b Adenovirus Gene Products in the Helper Effect for Adeno-Associated Virus

The Landscape of Early Clinical Gene Therapies outside of Oncology

Production of Retroviral and Lentiviral Gene Therapy Vectors: Challenges in the Manufacturing of Lipid Enveloped Virus

Large-scale Production of Lentiviral Vectors Using Multilayer Cell Factories

Methods Matter: Standard Production Platforms for Recombinant AAV Produce Chemically and Functionally Distinct Vectors

Functional Characteristics of the Novel, Human-Derived Recombinant FVIII Protein Product, Human-Cl rhFVIII

Efficient Transformation of Primary Human Amniocytes by E1 Functions of Ad5: Generation of New Cell Lines for Adenoviral Vector Production

Production of Lentiviral Vectors by Large-Scale Transient Transfection of Suspension Cultures and Affinity Chromatography Purification

Development of Inducible EIAV-Based Lentiviral Vector Packaging and Producer Cell Lines

Standardized, Scalable, and Timely Flexible Adeno-Associated Virus Vector Production Using Frozen High-Density HEK-293 Cell Stocks and CELLdiscs. Hum

Glycoengineering in CHO Cells: Advances in Systems Biology

LentiPro26: Novel Stable Cell Lines for Constitutive Lentiviral Vector Production

A Human Parvovirus, Adeno-Associated Virus, as a Eucaryotic Vector: Transient Expression and Encapsidation of the Procaryotic Gene for Chloramphenicol Acetyltransferase

Oncolytic Adenoviruses for Cancer Therapy

Insect Cells as a Factory to Produce Adeno-Associated Virus Type 2 Vectors. Hum

NUWIQ. Available at

YESCARTA. Available at

Scale-up and Manufacturing of Clinical-Grade Self-Inactivating γ-retroviral Vectors by Transient Transfection

ChAdOx1 nCoV-19 Vaccine Prevents SARS-CoV-2 Pneumonia in Rhesus Macaques

Retrovirus Classification and Cell Interactions

Large-scale Transient Expression in Mammalian Cells for Recombinant Protein Production

Glutamine Synthetase Gene Knockout-Human Embryonic Kidney 293E Cells for Stable Production of Monoclonal Antibodies

Self-inactivating Retroviral Vectors Designed for Transfer of Whole Genes into Mammalian Cells

The Scattered Twelve Tribes of HEK293

Safety, Tolerability, and Immunogenicity of a Recombinant Adenovirus Type-5

Vaccine: a Dose-Escalation, Open-Label, Nonrandomised, First-In-Human Trial

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.