key: cord-0982780-o8s83sbd authors: Hansen, Sören; Abd El Wahed, Ahmed title: Point-Of-Care or Point-Of-Need Diagnostic Tests: Time to Change Outbreak Investigation and Pathogen Detection date: 2020-09-25 journal: Trop Med Infect Dis DOI: 10.3390/tropicalmed5040151 sha: 722618283778623c7e72bcdb32a3018201eb8c44 doc_id: 982780 cord_uid: o8s83sbd In the recent years, the progress of international trade and travel has led to an increased risk of emerging infections. Around 75 percent of the pathogens causing these infections are of animal origin. Point-of-care tests (POCT) and point-of-need tests (PONT) have been established in order to directly provide accurate and rapid diagnostics at field level, the patient bed-side or at the site of outbreaks. These assays can help physicians and decision makers to take the right action without delay. Typically, POCT and PONT rely on genomic identification of pathogens or track their immunological fingerprint. Recently, protocols for metagenomic diagnostics in the field have been developed. In this review, we give an overview of the latest developments in portable diagnostic methods. In addition, four mobile platforms for the implementation of these techniques at point-of-care and point-of-need are described. These approaches can provide reliable diagnostics and surveillance, especially in low resource settings as well as at the level of one health. Many different microorganisms such as bacteria, viruses, fungi, or parasites exist in the environment. Most of them are important to maintain the ecosystem on earth, however, some of them are pathogenic and cause infectious diseases in both humans and animals. Infectious diseases are one of the major reasons for death especially in the low-and middle-income regions of the world [1] . While globalization and international travel progresses, the risk of emerging diseases is increasing. Due to global flight connections, people, goods, or traded animals can reach almost every location in the world within one or two days. Unfortunately, this time frame is shorter than the incubation periods of several important zoonotic and animal diseases with an emerging potential defined by the World Organization for Animal Health (OIE, Table 1 , [2] ). Around 75 percent of all new emerging diseases are zoonotic [3] . In many African countries, one of the causes leading to the emergence of pathogens is bush meat, since people living in rural areas depend on it as nutrition source. Not only the consumption but also the processing of the meat can lead to an infection [4] . Also, settlements in forests and deforestation are driving factors in the spread of infectious diseases as the habitats of pathogens´vectors and reservoirs shrink and start to overlap with areas where domesticated animals and people live [5] . The danger of being infected by a zoonotic disease is not limited to low resource settings. In general, every person who lives or works in close contact to animals is at risk. This is particularly true for people living on a farm or together with pets but also for people in contact with wild or zoo animals [6] . Unfortunately, there is a lack of diagnostic capacity in many regions of the world. Thus, disease outbreaks may stay undetected for longer time and can spread through the population of the affected area. For instance, in 2013, only twelve countries in sub-Saharan Africa have laboratories accredited to international standards. Ninety-one percent of the 380 laboratories were located in South Africa [7] . These numbers show the urgent need for diagnostic capacity in sub-Saharan Africa. Another example for the need of sophisticated diagnostics are natural disasters as they are often followed by infectious disease outbreaks. Normally an outbreak starts during the post-impact phase within the first four weeks after the disaster. Depending on the type of the catastrophe, the resulting disease differs. For instance, floods more often lead to mosquito-borne infections, while earthquakes are correlate with diseases occurring due to contaminated food or water sources [8] . The World Health Organization (WHO) defines a relatively-small number of diseases related to natural disasters. In contrast, interviews with experts involved in previous disaster situations revealed that there are several important pathogens, which are listed in Table 2 [9, 10] . A profound surveillance system is one of the main factors in preventing the spread of infectious diseases [11] , which can only be achieved with highly-advanced diagnostics. The current diagnostic approaches rely on centralized reference laboratories with high throughput, due to the need of complex and expensive devices. Point-of-care testing (POCT) describes the identification of pathogens near the patient with a fast turn-around time and the potential to immediately change in the health management [12] . While the term POCT is used for human patients and samples, point-of-need testing (PONT) has a broader meaning and also includes on-site testing of environment, animals, and food samples, although this term is not yet clearly defined. The WHO formulated the characteristics of POCT and PONT as affordable, sensitive, specific, user friendly, robust and rapid, equipment-free, and deliverable to those who need them (ASSURED criteria, [13] ). Examples for rapid diagnostics in the field are the POCTs for malaria and human immunodeficiency viruses (HIV). As a consequence of rapid testing, disease control as well as change in treatment and care was achieved particularly, in regions where stable electricity supply, highly trained personal, or specialized devices are not available [14] . Most POCT and PONT rely on immuno-techniques to detect antigens or antibodies, but methods for the identification of the pathogen at molecular level are on the rise [15] . In this review, we provide an overview of the latest field-applicable diagnostic methods and techniques as well as their implementation at point-of-care (POC) and point-of-need (PON). Immunoassays are based on binding of an antibody and an antigen to each other. The simplest and most used equipment-free assays are lateral flow immunoassays (LFIAs) as they are performed in a small disposable cartridge ( Figure 1 ). LFIAs do not require pipetting or washing steps and can be performed by untrained personal. In addition, no cold chain is required. Labelling of the secondary antibodies is accomplished mostly by gold or silver nanoparticles. LFIAs are able to detect pathogen-specific antigens and/or antibodies within 10-30 min. Recently, multiplex LFIAs have been developed for detecting multiple targets in a single test [16] . Paper-based micro fluid devices (µPAD) are yet another development of the lateral flow technique. Here, the sample is guided by hydrophobic channels [17] . This design enables more sophisticated applications like the combination of multiple serological assays in a single device [18, 19] . A critical drawback of this technology is the sensitivity and specificity, as lateral flow assays (LFA) highly depend on the labelling and binding affinity of the tested biomolecules [20] . A high concentration of molecules is necessary to achieve positive results. Therefore, LFA will produce a false negative result, when testing samples containing only few target molecules. Moreover, on some occasions sample preparation is necessary since the test design only allows liquid non-viscous samples. Also, quantification of targets is not possible using the LFA. The principle of a lateral flow immunoassay (LFIA) is as follows-the sample is brought onto the sample pad and flows in the opposite direction by adsorption. While the sample passes the conjugate pad, a labelled target-specific antibody binds to the target molecule in the sample (antigen or antibody). Afterwards, the labelled antibody-target complex is immobilized to the membrane by a specific capture molecule (antibody or antigen) adhered to the membrane at the test line. The unbound labelled antibodies are captured at a control line by immobilized antibodies. In the case of a positive sample, the accumulation of the labelled antibodies leads to a coloration of both test lines. In the case of a negative sample, only the control line is colored. The adsorbent pad takes up the excess liquid. In the case of pathogens or targets, which are not suitable for the indirect or sandwich designed LFIAs, a competitive layout can be applied. This results in only one colored test line in case of a positive test. Nucleic acid amplification methods have the advantage of being highly sensitive as opposed to immunological assays due to the amplification step. DNA is amplified using cycling methods such as polymerase chain reaction (PCR) or isothermal amplification. In contrast to the PCR, isothermal amplification assays have the advantage of employing a constant reaction temperature for the amplification. This offers more utility in the field due to the use of portable heat sources and shorter run time in comparison to the cycle driven PCR [21] . Moreover, most isothermal methods are known to be resistant to inhibitors existing in complex samples like blood [22] . Several different methods for isothermal amplification have been developed in recent years (Table 3) . From these methods, the two The principle of a lateral flow immunoassay (LFIA) is as follows-the sample is brought onto the sample pad and flows in the opposite direction by adsorption. While the sample passes the conjugate pad, a labelled target-specific antibody binds to the target molecule in the sample (antigen or antibody). Afterwards, the labelled antibody-target complex is immobilized to the membrane by a specific capture molecule (antibody or antigen) adhered to the membrane at the test line. The unbound labelled antibodies are captured at a control line by immobilized antibodies. In the case of a positive sample, the accumulation of the labelled antibodies leads to a coloration of both test lines. In the case of a negative sample, only the control line is colored. The adsorbent pad takes up the excess liquid. In the case of pathogens or targets, which are not suitable for the indirect or sandwich designed LFIAs, a competitive layout can be applied. This results in only one colored test line in case of a positive test. Nucleic acid amplification methods have the advantage of being highly sensitive as opposed to immunological assays due to the amplification step. DNA is amplified using cycling methods such as polymerase chain reaction (PCR) or isothermal amplification. In contrast to the PCR, isothermal amplification assays have the advantage of employing a constant reaction temperature for the amplification. This offers more utility in the field due to the use of portable heat sources and shorter run time in comparison to the cycle driven PCR [21] . Moreover, most isothermal methods are known to be resistant to inhibitors existing in complex samples like blood [22] . Several different methods for isothermal amplification have been developed in recent years (Table 3) . From these methods, the two most evolving techniques are the loop-mediated isothermal amplification (LAMP, Figure 2 ) and the recombinase polymerase amplification (RPA, Figure 3 ). All features of both methods are compared in Table 4 . The single-stranded DNA forms stem-loops by self-annealing of the corresponding sequences and acts as template for exponential amplification [23] . The implementation of equipment-free nucleic acid amplification at POC and PON is extremely challenging. Although there are equipment-free LAMP assays, they still need a heating source [26, 27] . Nevertheless, to overcome the required power supply for the LAMP reaction, LaBarre et al. developed a portable heating cartridge based on exothermal-reaction and engineered phase-change material. Heat is generated by the reaction of calcium oxide and water. To keep the temperature in the optimal range, a fat-based compound with a specific heat capacity and melting point (65 • C) is applied. Beside LAMP, this cartridge is also suitable for other isothermal reaction like RPA or the nicking enzyme amplification reaction NEAR [28] . Nucleic acid lateral flow (immuno-) assays (NALFAs/NALFIAs) provided a simple and inexpensive read-out of the different amplification methods [29] . These assays are mainly based on the capture of tagged amplicons or detection of amplicons in a sandwich format [30] . The use of the lateral flow technique removes the need for sophisticated devices (e.g., a fluorescence reader). In some studies, isothermal amplifications were shown to operate on paper-based devices. While paper-based RCA [31] works on room temperature without equipment. RPA was also conducted equipment-free using the body heat for incubation combined with a lateral flow-based detection of the tagged amplicons. The principle of RPA lateral flow detection is shown in Figure 3C ,D, [32] . The bottleneck of the molecular diagnostics is the nucleic acid extraction as high quality DNA is needed for both DNA amplification assays and sequencing. Moreover, the sensitivity of diagnostic method is questioned if the right extraction method is not implemented. Despite many breakthroughs and full automation of the DNA and RNA extraction, very few studies have tried to set up a field-applicable extraction procedure. The most common extraction procedure relies on the binding of the nucleic acid to a silica gel membrane after a lysis step using a cocktail of chaotropic salts and proteinases [33] . In such case, a high-speed centrifuge is necessary. Magnetic bead-based purification methods omit the need for a centrifugation step, but several pipetting steps are still essential and total hands-on time exceeds 60 min [34] . Recently, a simple one-step purification protocol was applied to the extraction nucleic acid of paratuberculosis from fecal samples [35] , Leishmania from blood and skin [36, 37] , Ebola from saliva [38] , and rabies from tissue samples [39] . This method combined detergents and heat for the lysis step and magnetic beads to capture the inhibitors. The total run time was 15 min and one pipetting was applied as washing was not required. A quick extraction method, which incorporates detergent, proteinases, and heat, was used to obtain the RNA from hepatitis C [40] and Ebola viruses [41] . Another approach based on two steps of alkaline lysis then neutralization was used for DNA collection from skin samples of Buruli ulcer patients [42] . Despite the availability of rapid extraction techniques, so far, they have not been widely used. Another important issue is the demand for non-invasive samples for diagnostics to avoid the hassle of the need for a highly-qualified person to collect complex samples like blood and cerebrospinal fluid at PON [43] . Metagenomic diagnostics is the identification of pathogens after sequencing of genomic material collected from suspected cases [44] . This approach is based on the sequencing and identification of either all the nucleic acids present in the sample (shotgun metagenomics) or a particular group of previously generated amplicons (targeted-amplicon sequencing) [45] . The molecular detection through PCR or isothermal amplification of a pathogen requires a known target nucleic acid sequence. Thus, in an outbreak of unknown cause, selection of the right molecular assay upon the clinical signs is challenging and a novel pathogen or variants of known infectious agent may remain undetected [46] . Metagenomic diagnostics overcomes this problem by sequencing and identifying all of the nucleic acids within the sample and thereby preparing for simpler diagnostic testing. Also, information about epidemiology and transmission route can be achieved [47] . However, the performance of this method strongly relies on the used genome database and depth of sequence analysis as well as on the amount of generated reads [48] . The major drawbacks of metagenomic diagnostics are the high costs per sequencing sample and the relatively long turnover times [47] . Sequencing methods require heavy and complex devices. However, the introduction of nanopore sequencing to the market by Nanopore Technologies allowed third-generation sequencing at PON due to small portable sequencing devices (Figure 4) . The great utility of nanopore sequencing at PONf ne was proven by identification of pathogens direct from clinical samples [49] as well as during the surveillance for instance of Ebola and Zika outbreaks in West-Africa and South-America [50, 51] . drawbacks of metagenomic diagnostics are the high costs per sequencing sample and the relatively long turnover times [47] . Sequencing methods require heavy and complex devices. However, the introduction of nanopore sequencing to the market by Nanopore Technologies allowed third-generation sequencing at PON due to small portable sequencing devices (Figure 4) . The great utility of nanopore sequencing at PONf ne was proven by identification of pathogens direct from clinical samples [49] as well as during the surveillance for instance of Ebola and Zika outbreaks in West-Africa and South-America [50, 51] . Immunoassays are an inexpensive, robust, and simple way to detect antibodies. Since different types of antibodies can be detectable after several days and up to several years in the blood [52] , immunoassays represent an easy way for surveillance of previous and ongoing chronic infection. However, the identification of a disease based solely on antibody detection may lead to a false assumption about the diseased status of the individual. During persistent infections a detection of antigens and antibodies is normally possible over a long period of time; a latent infection (as a special case of persistent infection) is characterized by a very low antigen concentrations but high antibody level (for definitions see Table 5 , [53] ). In the latter case, nucleic acid amplification assays are needed Immunoassays are an inexpensive, robust, and simple way to detect antibodies. Since different types of antibodies can be detectable after several days and up to several years in the blood [52] , immunoassays represent an easy way for surveillance of previous and ongoing chronic infection. However, the identification of a disease based solely on antibody detection may lead to a false assumption about the diseased status of the individual. During persistent infections a detection of antigens and antibodies is normally possible over a long period of time; a latent infection (as a special case of persistent infection) is characterized by a very low antigen concentrations but high antibody level (for definitions see Table 5 , [53] ). In the latter case, nucleic acid amplification assays are needed as they can detect a low number of genomes with high specificity, which is especially helpful as for some chronic infections, the concentration of pathogens, antigens, and antibodies varies over the time [54] . Thus, the combination of immunological and genomic methods is necessary. On the other hand, as the immune response towards a disease starts a few days post infection and reaches the highest point around two weeks post infection [55] , the detection of an acute infection is not possible solely based on antibodies. When the pathogen exists with a low concentration in the sample or is detectable for a short period of time, nucleic acid amplification assays are a good tool for diagnosis of such cases. Table 5 . Possibility of Antigen/Antibody Detection in Different Types of Infection [38] . Detection of Antigens Detection of Antibodies The need for on-site diagnostic facilities was demonstrated during the West African Ebola outbreak as health systems of the affected countries were overloaded or not existing. Mobile laboratories were developed to enable diagnosis during outbreak situations. Their great advantage was their capacity to perform several diagnostic tests just as a central laboratory while being in the field at the site of an outbreak. To overcome the problem of the long distances to the central diagnostic laboratories during the hemorrhagic fever outbreak in West-Africa, the European Mobile Lab Project established a moving laboratory unit in Nigeria, consisting of 27 boxes, each approximately 20 kg to 30 kg in weight. These boxes contained more than 400 equipment items needed to set up a fully-functional BSL3 or BSL4 diagnostic laboratory in a tent or in a local house. Minimum requirements were at least 28 square meters of space and a car for constant energy supply. European Mobile Labs enabled sample inactivation and preservation, molecular diagnostics using real-time PCR, antigen/antibody tests via ELISA and immunofluorescence assay as well as direct visualization of blood parasites using microscopy [56] . Originally developed for the field-applicable detection of avian influenza, the mobile suitcase laboratory was implemented in Guinea during the time of the West African Ebola outbreak. This PON diagnostics solution consists of two trolley cases, a solar panel, a power pack, and an optional glove box. One of the trolley cases was employed for nucleic acid extraction applying a reverse purification magnetic beads-based method. The second trolley case contained all instruments for the detection of the extracted nucleic acid via RPA or nanopore sequencing. The devices were placed on foam covered by a PVC top layer to be protected from shocks and to facilitate disinfection. The glove box can be used for sample disinfection and nucleic acid extraction in the case of BSL3 and BSL4 pathogens. All materials, kits, and reagents needed for nucleic acid extraction, isothermal amplification, and sequencing were stored in the suitcases. Due to the compact design, the mobile suitcase laboratory was easy to operate even in challenging surroundings [38, 57] . Another example for a mobile lab solution is the lab in a caravan. Based on the experiences made during the Ebola outbreak in West Africa in 2016, the Zika in Brazil Real Time Analysis (ZEBRA) project implemented two labs in caravan. These complete BSL 3 laboratories were set up in a trailer and used to collect and sequence samples of the Zika virus (ZIKV) using the nanopore sequencing technology along parts of the Brazilian east coast [58] . The Praesens Foundation developed a mobile laboratory implemented in a small truck [59] . The mobile laboratory contains a real-time thermocycler and a BSL3 glove box for sample preparation. The laboratory is air conditioned and can be hermetically sealed by the inside lower air pressure. For communication, Wi-Fi, mobile, and satellite connection are implemented. The lab has two batteries for power supply lasting more than 72 h. The truck has free bench spaces, which can be used for the operation of more diagnostic methods [60] . The miniaturization and automatization of various laboratory workflows in one small apparatus were achieved through the lab-on-chip or microfluidics technologies. Bacterial concentration and recovery were conducted by combining ceramic membrane and tangential flow filtration [61] . In a size of 2 cm 2 , bacterial culture and quantification was accomplished by surface plasmon resonance and protein microarrays [62] . The advancement in the lab-on-chip allowed the integration of ELISA [63] and molecular assays (RPA [64] and LAMP [65] ) in the form of a compact disc. Moreover, chips for improving the detection and accuracy of lateral-flow-based molecular assay were established based on oligonucleotide-linked gold nanoparticles [66] . The lab-on-chip facilitates controlled and fully automated diagnostic tests in a very short time. Nevertheless, the production cost is high, the design is a very complex procedure and not commercially available. In the case of an emerging or new disease like coronavirus disease 2019 (COVID-19), the first step to identifying the causative agent is isolation and/or nucleic acid sequencing [67] . Upon identification of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the most successful measurement was diagnosis and isolation of suspected cases since no vaccine or medicament were available. Molecular assays based on real-time RT-PCR is the main technology used worldwide to detect infected or asymptomatic cases [68] . Unfortunately, rapid antigen test performance was questionable since the viral load is very low in patient samples [69] . Many isothermal amplification technologies were developed to allow rapid case identification at local remote hospitals, in walk-through test centers and/or port-of-entry [23, [70] [71] [72] [73] . Regrettably, despite these methods having the same accuracy as PCR, the general acceptance of the method is very poor. Nevertheless, one of the big problems during epidemics is the rush in approving diagnostic tests and as a consequence, the assay efficiency is low [74] [75] [76] . There is a need for a unified assay validation regulation for emerging or novel pathogens. In the last three decades, more than 30 new infectious diseases have emerged, most of them zoonotic [77] . To prevent the pathogens from crossing species barriers or spreading globally, a reliable method for the identification of pathogens is needed urgently. POCT and PONT are valuable tools for the diagnostics directly in the field and at the site of an outbreak. The big advantage of POC and PON diagnostics is the identification of pathogens directly at the site of the diseased person or animal with small turn-around times. So, the persons responsible for treatment can react more quickly according to the result. The use of POCT and PONT at airports, harbors, and quarantine stations can prevent the global spread of many infectious diseases due to international travel and trade. Furthermore, the sample volume needed for the tests is often smaller than in conventional laboratory tests. In addition, the use of POCT and PONT can lead to more adherence and optimization of the treatment regimen at the clinical site. Routine use of POCT and PONT can support the building of broad and comprehensive diagnostic infrastructure, especially in low resource settings, as the tests are mostly equipment-free and only small investments in local facilities are necessary (Table 6 ). The tests can be shipped easily to the location where they are needed and can overcome the pitfalls of low or demolished diagnostic infrastructures, especially in limited resource settings. These abilities make POCT and PONT an important instrument for the prevention of disease spread. Unfortunately, current POCT and PONT are often designed for the detection of a single pathogen and do not have the diagnostic capabilities of laboratory tests. A platform suitable for the investigation of multiple pathogens is needed in order to identify the causative pathogen of an outbreak. Tests based on nucleic acid amplification can easily be adjusted to several pathogens. Once the outbreak causing pathogen is detected, a target-specific rapid test kit can be deployed to recognize the diseased individuals. Implemented in mobile laboratories POCT and PONT are a valuable tool not only for diagnostics in an outbreak situation but also for surveillance. This eases the implementation of functional diagnostics in a region with low infrastructure and helps to build up diagnostic capacity. Pricing infectious disease. The economic and health implications of infectious diseases OIE-Listed Diseases, Infections and Infestations in Force in 2019 The global one health paradigm: Challenges and opportunities for tackling infectious diseases at the human, animal, and environment interface in low-resource settings Bushmeat and Emerging Infectious Diseases: Lessons from Africa Forests and emerging infectious diseases of humans Descriptive study of enteric zoonoses in Ontario Medical Laboratories in Sub-Saharan Africa That Meet International Quality Standards Infectious diseases following natural disasters: Prevention and control measures Evidence-based point-of-care tests and device designs for disaster preparedness Communicable Diseases Following Natural Disasters Controlling the spread of infectious diseases. In Advancing the Right to Health: The Vital Role of Law Opportunities and challenges for cost-efficient implementation of new point-of-care diagnostics for HIV and tuberculosis Rapid tests for sexually transmitted infections (STIs): The way forward Enabling the Development and Deployment of Next Generation Point-of-Care Diagnostics Point-of-Care Testing for Infectious Diseases: Past, Present, and Future A multiplex lateral flow immunoassay for the rapid identification of NDM-, KPC-, IMPand VIM-type and OXA-48-like carbapenemase-producing Enterobacteriaceae Paper-Based Antibody Detection Devices Using Bioluminescent BRET-Switching Sensor Proteins Paper-Based Microfluidic Devices: Emerging Themes and Applications Paper-based analytical devices for clinical diagnosis: Recent advances in the fabrication techniques and sensing mechanisms High-Speed Lateral Flow Strategy for a Fast Biosensing with an Improved Selectivity and Binding Affinity Isothermal amplification methods for the detection of nucleic acids in microfluidic devices Isothermal nucleic acid amplification technologies for point-of-care diagnostics: A critical review Loop-mediated isothermal amplification of DNA DNA detection using recombination proteins Rapid detection of Plasmodium falciparum with isothermal recombinase polymerase amplification and lateral flow analysis Equipment-free nucleic acid extraction and amplification on a simple paper disc for point-of-care diagnosis of rotavirus A A Paper-Based Device for Performing Loop-Mediated Isothermal Amplification with Real-Time Simultaneous Detection of Multiple DNA Targets A simple, inexpensive device for nucleic acid amplification without electricity-toward instrument-free molecular diagnostics in low-resource settings Isothermal DNA amplification combined with lateral flow dipsticks for detection of biothreat agents Lateral flow (immuno)assay: Its strengths, weaknesses, opportunities and threats. A literature survey Target-Induced and Equipment-Free DNA Amplification with a Simple Paper Device Equipment-free incubation of recombinase polymerase amplification reactions using body heat Current Nucleic Acid Extraction Methods and Their Implications to Point-of-Care Diagnostics Integrated DNA and RNA extraction using magnetic beads from viral pathogens causing acute respiratory infections Abd El Wahed, A. Development of Rapid Extraction Method of Mycobacterium avium Subspecies paratuberculosis DNA from Bovine Stool Samples Abd El Wahed, A. Mobile suitcase laboratory for rapid detection of Leishmania donovani using recombinase polymerase amplification assay Evaluation of Rapid Extraction Methods Coupled with a Recombinase Polymerase Amplification Assay for Point-of-Need Diagnosis of Post-Kala-Azar Dermal Leishmaniasis Development and deployment of a rapid recombinase polymerase amplification Ebola virus detection assay in Guinea in 2015 Development of molecular confirmation tools for swift and easy rabies diagnostics Mechanisms of methods for hepatitis C virus inactivation Ebola Virus Inactivation by Detergents Is Annulled in Serum Rapid Extraction Method of Mycobacterium ulcerans DNA from Clinical Samples of Suspected Buruli Ulcer Patients Find the right sample: A study on the versatility of saliva and urine samples for the diagnosis of emerging viruses Diagnostic metagenomics: Potential applications to bacterial, viral and parasitic infections Highlighting Clinical Metagenomics for Enhanced Diagnostic Decision-making: A Step Towards Wider Implementation Combination random isothermal amplification and nanopore sequencing for rapid identification of the causative agent of an outbreak The challenge of diagnostic metagenomics Understanding the Promises and Hurdles of Metagenomic Next-Generation Sequencing as a Diagnostic Tool for Infectious Diseases Assessment of metagenomic Nanopore and Illumina sequencing for recovering whole genome sequences of chikungunya and dengue viruses directly from clinical samples Real-time, portable genome sequencing for Ebola surveillance Multiplex PCR method for MinION and Illumina sequencing of Zika and other virus genomes directly from clinical samples Persistence of detectable immunoglobulin M antibodies up to 8 years after infection with West Nile virus Persistent Viral Infections University of Texas Medical Branch at Galveston Distribution of Mycobacterium avium subsp A Rapid Blood Test To Determine the Active Status and Duration of Acute Viral Infection Mobile diagnostics in outbreak response, not only for Ebola: A blueprint for a modular and robust field laboratory Diagnostics-in-a-Suitcase: Development of a portable and rapid assay for the detection of the emerging avian influenza A (H7N9) virus Praesens Foundation; Field Diagnostics; Praesens Found An automated bacterial concentration and recovery system for pre-enrichment required in rapid Escherichia coli detection On-chip microbial culture for the specific detection of very low levels of bacteria A Colorimetric Enzyme-Linked Immunosorbent Assay (ELISA) Detection Platform for a Point-of-Care Dengue Detection System on a Lab-on-Compact-Disc Automated real-time detection of drug-resistant Mycobacterium tuberculosis on a lab-on-a-disc by Recombinase Polymerase Amplification A microdevice for rapid, monoplex and colorimetric detection of foodborne pathogens using a centrifugal microfluidic platform Oligonucleotide-linked gold nanoparticle aggregates for enhanced sensitivity in lateral flow assays Coronaviridae Study Group of the International Committee on Taxonomy of Viruses. The species Severe acute respiratory syndrome-related coronavirus: Classifying 2019-nCoV and naming it SARS-CoV-2 COVID-19) Update: FDA Authorizes First Antigen Test to Help in the Rapid Detection of the Virus that Causes COVID-19 in Patients Rapid detection of SARS-CoV-2 by low volume real-time single tube reverse transcription recombinase polymerase amplification using an exo probe with an internally linked quencher (exo-IQ) RT-LAMP for rapid diagnosis of coronavirus SARS-CoV-2 A Novel Reverse Transcription Loop-Mediated Isothermal Amplification Method for Rapid Detection of SARS-CoV-2 Rapid detection of COVID-19 coronavirus using a reverse transcriptional loop-mediated isothermal amplification (RT-LAMP) diagnostic platform RT-qPCR Testing of SARS-CoV-2: A Primer Letter to the editor: SARS-CoV-2 detection by real-time RT-PCR Clinical Evaluation of Three Sample-To-Answer Platforms for the Detection of SARS-CoV-2 Emerging Infectious Diseases: Epidemiological Perspective We acknowledge the support of the Open Access Publication Funds of the University of Goettingen, Germany. The authors declare no conflict of interest.