key: cord-0981967-417dwpse
authors: Hua, Jiangshan; Lu, Chuan; Zhao, Jieyun; Yang, Zhi; He, Dongmei
title: Disc repositioning by open suturing vs. mini-screw anchor: stability analysis when combined with orthognathic surgery for hypoplastic condyles
date: 2022-04-26
journal: BMC Musculoskelet Disord
DOI: 10.1186/s12891-022-05337-2
sha: 03e916823f7590e0c7a367467ccae7620538f980
doc_id: 981967
cord_uid: 417dwpse

BACKGROUND: Disc repositioning by Mitek anchors for anterior disc displacement (ADD) combined with orthognathic surgery gained more stable results than when disc repositioning was not performed. But for hypoplastic condyles, the implantation of Mitek anchors may cause condylar resorption. A new disc repositioning technique that sutures the disc to the posterior articular capsule through open incision avoids the implantation of the metal equipment, but the stability when combined with orthognathic surgery is unknown. The purpose of this study was to evaluate the stability of temporomandibular joint (TMJ) disc repositioning by open suturing in patients with hypoplastic condyles when combined with orthographic surgery. METHODS: Patients with ADD and jaw deformity from 2017 to 2021 were included. Disc repositioning by either open suturing or mini-screw anchor were performed simultaneously with orthognathic surgery. MRI and CT images before and after operation and at least 6 months follow-ups were taken to evaluate and compare the TMJ disc and jaw stability. ProPlan CMF 1.4 software was used to measure the position of the jaw, condyle and its surface bone changes. RESULTS: Seventeen patients with 20 hypoplastic condyles were included in the study. Among them, 12 joints had disc repositioning by open suturing and 8 by mini-screw anchor. After an average follow-up of 18.1 months, both the TMJ disc and jaw position were stable in the 2 groups except 2 discs moved anteriorly in each group. The overall condylar bone resorption was 8.3% in the open suturing group and 12.5% in the mini-screw anchor group. CONCLUSIONS: Disc repositioning by open suturing can achieve both TMJ and jaw stability for hypoplastic condyles when combined with orthognathic surgery.

Anterior disc displacement (ADD) is a common temporomandibular disorder (TMD). The clinical manifestations are joint pain, clicking, and limited mouth opening. For some cases, conservative treatment such as medications, physiotherapy including low-intensity pulsed ultrasound etc. can achieve good results through masticatory biofeedback [1, 2] . Whereas in some cases, ADD may cause condylar resorption [3] . When ADD happens in juveniles, the growth of the condyle may be affected and cause mandibular asymmetry and/or retrognathia [4] . Studies have showed that ADD may increase jaw instability when combined with orthognathic surgery [5] , especially for idiopathic condylar resorption (ICR) patients where the relapse rate has been reported from 83.3% to 100% [6] . To solve this problem, Wolford proposed disc repositioning when combined with orthognathic surgery [7] by Mitek anchors and gained more stable results than when disc repositioning was not performed [8] [9] [10] [11] . Later, Yang et. al designed a self-inserted titanium miniscrew anchor (5 mm in length and 2 mm in diameter), with a slot at the end for bolting sutures [12, 13] . But for hypoplastic condyles which has normal morphology and structure but are diminished in size on radiographic examination [14] , inserting a metal device (anchor) may interfere with the blood supply of the condyle and cause resorption. In 2001, Yang modified a disc suturing technique under the arthroscope which sutured the disc to the posterior articular capsule [15] . The follow-up results by MRI showed good stability [16] . Later, He used a similar technique as Yang through an open incision to avoid the need for special equipment and for ease of operation [17] . However, the stability of this suturing technique when combined with orthognathic surgery, especially for patients with hypoplastic condyles is unknown.

The purpose of the study was to evaluate TMJ and jaw stability after disc repositioning by open suturing when combined with orthognathic surgery, and to compare it to the Yang's self-designed mini-screw anchor of disc repositioning for hypoplastic condyles.

This was a retrospective clinical study which was approved by the Shanghai 9 th People's Hospital Human Research Ethics Committee (SH9H-2018-T88-2). The guidelines of the Declaration of Helsinki were followed in the present study. Patients treated with disc repositioning and simultaneous orthognathic surgery from January 2017 to January 2021 were enrolled in the study. The inclusion criteria were: 1) ADD with hypoplastic condyle (normal condylar morphology but small bone volume) and dentofacial deformity diagnosed by MRI and CT pre-operation; 2) TMJ disc repositioning by either open suturing or mini-screw anchor and concomitant orthognathic surgery (bilateral sagittal split ramus osteotomy, BSSRO ± Le Fort I); 2) operated by one surgeon (Dr. He); 3) MRI and CT data before and within 1 week after operation and at least 6 months follow-up. The exclusion criteria were: 1) ADD with normal condylar morphology and structure; 2) previous TMJ surgery; 3) total joint reconstruction on one side; 4) severely deformed discs which is unsalvageable.

Surgical treatment was as follows: 1) disc repositioning by either open suturing to the posterior articular capsule [17] or mini-screw anchor [13] through modified preauricular small incision as we previously described (Fig. 1) ; 2) BSSRO was performed for all patients. Le Fort I osteotomy was lastly performed when indicated [18] .

The TMJ and jaw stability after surgery were evaluated as the following measurements and compared between different disc repositioning methods. 

MRI scans were acquired by a 1.5-T imager (Signa, General Electric Medical Systems, Milwaukee, WI) with bilateral 3-inch TMJ surface coil receivers for all patients before and after operation and during follow-ups. Oblique sagittal images with closed-(proton density-weighted imaging, PDWI) and openmouth (T2-weighted images, T2WI) positions and coronal images (T2WI) of the condyle were acquired for evaluation of disc position and condylar bone status [19] . When the posterior band of the disc was at the 1 to 2 o'clock position of the condyle, it was considered overcorrected and well positioned. When the posterior band of the disc was at the 12 o'clock position of the condyle, it was considered in a normal position. When the posterior band of the disc was anterior to the 12 o'clock position of the condyle and without reduction during mouth opening, it was considered not repositioned or relapsed [20] . The status of condylar bone was defined as bone deposition, no change and resorption.

All patients had CT scans using their maximum intercuspal position (layer thickness, 1 mm; reconstruction layer thickness, 0.625 mm; GE Healthcare, Chicago, IL) and at three time points: preoperative (T0), within 1 week postoperative (T1) and the last follow-up (T2). The position of jaw, condyle and its surface bone changes were measured by ProPlan CMF 1.4 software (Materialise, Leuven, Belgium, Figs. 2A-B) . Definitions of three-dimensional (3D) bony landmarks for measurement were shown in Tables 1, 2 and 3. First, the segmentation function was used to perform 3D reconstruction of the maxillary model with cranial base and mandibular models at T0, T1 and T2 time intervals. As a fixed structure, the cranial base was used for superimposition of T1 and T2 maxillary models to T0 by using surface-best-fit registration as reported by Wan et al. [21] . The position of the maxilla and mandible at different time intervals (T0, T1 and T2) were then compared. The coordinate system was established as: Y plane (sagittal plane): passing through N, S and Ba; FH plane: passing through Or and Po and perpendicular to Y plane; X plane (horizontal plane): passing through N and parallel to FH plane; Z plane (coronal plane): passing through N and perpendicular to X plane and Y plane.

Stability of the distal segment of the mandible was measured by the position change of point B in the threedimensional coordinate system. Stability of the proximal segment of the mandible was measured by condylar Fig. 2 Measurement of the stability. A, superimposition of T0, T1 and T2 maxilla models using surface best fit registration; (B), coordinate system; (C), changes of B-Z between T1 and T2 reflect sagittal stability of mandible; (D), changes of B-Y between T1 and T2 reflect coronal stability of mandible; E and F, ΔGo-Y at T1 and T2 reflect mandibular symmetry rotation and the symmetry of GoR/GoL in the threedimensional coordinate system. Changes of B-Z between T1 and T2 reflect sagittal stability of the mandible. Changes of B-Y between T1 and T2 reflect coronal stability of the mandible. ΔGo-Y at T1 and T2 reflect mandibular symmetry (Figs. 2C-F). Condylar rotation was described by measuring the changes of Pitch, Roll and Yaw between T1 and T2 mandibular models (Figs. 3A-C). Maxillary stability was measured by the changes of pitch, roll and yaw in the three-dimensional coordinate system between T1 and T2 maxillary models (Figs. 3D-F).

Condylar position and surface bone remodeling were measured by the position changes of corresponding points between T1 and T2 mandibular models (Figs. 4A-B). In order to distinguish between condylar movement and remodeling, we superimposed T1 and T2 mandibular models using surface-best-fit registration based on the following area of the mandible that are the least affected by bone remodeling after surgery: 1) the posterior area of mandible ramus above the lingua and below the condyle neck; and, 2) the coronoid process [22] . After superimposition, we obtained a registered T2 mandibular model (T 2 r, Figs. 4C-D). Condylar movement was measured by changes of CoT-X, CoT-Y, CoT-Z between T 2 r and T2 mandibular models (Figs. 4E-F) and condylar remodeling was measured by changes of CoT-X, CoL-Y, CoM-Y, CoA-Z, CoP-Z between T 2 r and T2 mandibular models after surgery and during follow-ups (Figs. 3C-D).

Jaw stability, condylar movement and surface bone remodeling in open suturing group and mini-screw anchor group within 1 week after surgery and at the last follow-up were compared by paired t test in SPSS 17.0 software (IBM Corp, Armonk, NY). Independent t test was used to analyze the differences between open suturing and mini-screw anchor groups. P < 0.05 was considered statistically significant.

Seventeen patients were included in the study. There were 3 males and 14 females ranging in age from 19 to 28 years (mean = 23.1). Table 4 ). Eight patients were prepared orthodontically to the surgery (4 in suturing group and 4 in mini-screw anchor group). Five patients had "surgery first" and received orthodontic treatment after surgery (2 in suturing group and 3 in mini-screw anchor group). Four patients didn't receive orthodontic treatment before and after surgery (3 in suturing group and 1 in mini-screw anchor group).

The first outcome of this study was the difference in TMJ stability using suturing compared to mini-screw fixation. MRI showed that all the 21 anteriorly displaced discs were repositioned after operation. During follow-ups, 19 discs were in good position but 2 moved anteriorly, including 1 in open suturing group and 1 in mini-screw anchor group. In the open suturing group, 8 condyles had bone deposition (66.7%), 3 had no change (25%) and 1 had a slight bone resorption (8.3%). In the mini-screw anchor group, 3 condyles had bone deposition (37.5%), 4 had no change (50%) and 1 had a slight bone resorption (12.5%). Condylar bone was more stable in the open suturing group than mini-screw anchor group (91.7% vs. 87.5%, Table5). Two condyles with slight bone resorption had anteriorly disc relapse. The second outcome was jaw stability after disc repositioning by open suturing or mini-screw anchor for hypoplastic condyles when combined with orthognathic surgery. CT measurement showed that there were no significant jaw position changes in both open suturing and mini-screw anchor groups during follow-up (p > 0.05, Table 6 ). Although immediately after surgery, condyles after disc repositioning moved significantly downward (average of 1.57 mm, p = 0.000) and laterally (average of 1.12 mm, p = 0.007), and at the last follow up, they moved upward (average of 1.24 mm, p = 0.000), medially (average of 0.73 mm, p = 0.009) and posteriorly (average of 1.16 mm, p = 0.001, Table 7 ), jaw stability was not affected. At the last follow-up, condyles after disc repositioning showed significant bone deposition on the medial surface (p = 0.043, Figs. 6C, E 10C and Table 8 ). There was no significant bone resorption in the two groups (p > 0.05, Table 9 ).

The TMD prevalence is increasing, especially during pandemic COVID 19, therefore new treatment methods are especially needed [23] . As the most common type of TMD, presurgical ADD is an important factor for the relapse of orthognathic surgery [24, 25] . Disc repositioning for ADD when combined with [7] [8] [9] [10] [11] . In this study, we tried a new method of disc repositioning by open suturing for hypoplastic condyles when combined with orthognathic surgery. Instead of inserting a metal anchor to the condyle, we used non-absorbable suture to fix the disc into the posterior capsule. The advantage of this method is no disturbance of the blood supply to the condyle during dissection. The disadvantage is the stability of fixation the disc to soft tissue instead of bone, especially when the jaw was split and moved during orthognathic surgery. We used MRI and CT measurements to evaluate TMJ and jaw stability in this study. The results showed that both techniques (open suturing and mini-screw anchor) for disc repositioning on hypoplastic condyles can acquire stable TMJ and jaw position when combined with orthognathic surgery.

TMJ stability was evaluated by MRI which is a golden standard for disc position and bone status. After orthognathic surgery, each group had 1 disc relapsed anteriorly and slight bone resorption. Compared with mini-screw anchor, open suturing had more condylar bone deposition (66.7% vs. 37.5%), and less bone resorption (8.3% vs. 11.1%) with an overall more condylar bone stability (91.7% vs. 87.5%). Gomes et al. found after disc repositioning by Mitek anchors when combined with orthognathic surgery, the overall condylar volume tended to reduce and Fig. 5 . A, MRI showed right anterior disc displacement without reduction before surgery; (B), the disc was repositioned after surgery; (C), the disc was in position at 1.5 years follow-up with significant bone deposition; (D), CT showed right condyle had a reduction in volume before surgery; (E), significant bone deposition was shown at 1.5 years follow-up. Red arrows indicate TMJ disc over 30% of the cases showed more than 1.5 mm of bone resorption on at least one surface of the condyle [8] . But he did not describe the jaw stability. In our study, we also found 12.5% of the hypoplastic condyles with ADD had slight bone resorption about 1 mm after disc repositioning by Yang's self-designed mini-screw anchor, but the jaw stability was not affected. So far, there is no report on the correlation between the degree of condylar resorption and jaw stability with orthognathic surgery. How much condylar resorption which affects jaw stability needs further study.

After TMJ disc repositioning, the condyle moved downward and laterally, but during follow-ups, it moved upward, medially and posteriorly. This is because of the reduction of postsurgical swelling and disc reshaping developed as Chen and Gomes reported [26, 27] . Although the condyle moved a little bit, the patient's jaw position and occlusion were stable within the range of compensation.

Small sample size and the predominance of women in the group were the limitations of this study. Since it was a preliminary study on the new disc repositioning method by open suturing when combined with orthognathic surgery, we only tried a small number of patients to see if it was stable before large number of patients performed. According to the pilot data, a prospective study will be designed in the future including adequate number of patients for further analysis. 

Effects of low-intensity pulsed ultrasound (LIPUS) applied on the temporomandibular joint (TMJ) region on the functional treatment of class II malocclusion: A randomized controlled trial

Evaluation of Biofeedback Usefulness in Masticatory Muscle Activity Management-A Systematic Review

Condylar resorption of the temporomandibular joint: how do we treat it?

Temporomandibular joint disorders in patients with different facial morphology. A systematic review of the literature

Does temporomandibular joint pathology with or without surgical management affect the stability of counterclockwise rotation of the maxillomandibular complex in orthognathic surgery? A systematic review and meta-analysis

Idiopathic condylar resorption

Postsurgical stability of counterclockwise maxillomandibular advancement surgery: affect of articular disc repositioning

Three-dimensional stability analysis of maxillomandibular advancement surgery with and without articular disc repositioning

Counterclockwise maxillomandibular advancement surgery and disc repositioning: can condylar remodeling in the long-term follow-up be predicted?

Temporomandibular joint condylar changes following maxillomandibular advancement and articular disc repositioning

Concomitant temporomandibular joint and orthognathic surgery: A preliminary report

Temporomandibular joint disc repositioning using bone anchors: an immediate post surgical evaluation by magnetic resonance imaging

Modified temporomandibular joint disc repositioning with miniscrew anchor: part I-surgical technique

Association between hypoplastic condyles and temporomandibular joint disc displacements: a cone beam computed tomography and magnetic resonance imaging metrical analysis

New arthroscopic disc repositioning and suturing technique for treating an anteriorly displaced disc of the temporomandibular joint: part I-technique introduction

Techniques of Yang's arthroscopic discopexy for temporomandibular joint rotational anterior disc displacement

Temporomandibular joint disc repositioning by suturing through open incision: A technical note

Stability of orthognathic surgery in the treatment of condylar osteochondroma combined with jaw deformity by CT measurements

The magnetic resonance imaging evaluation of condylar new bone remodeling after Yang's TMJ arthroscopic surgery

Modified temporomandibular joint disc repositioning with mini-screw anchor: Part II-Stability evaluation by magnetic resonance imaging

Evaluation of the postoperative stability of a counter-clockwise rotation technique for skeletal class II patients by using a novel three-dimensional position-posture method

Assessment of condylar changes after orthognathic surgery using computed tomography regional superimposition

One year into the COVID-19 pandemic -temporomandibular disorders and bruxism: What we have learned and what we can do to improve our manner of treatment

Does orthognathic surgery cause or cure temporomandibular disorders? A systematic review and meta-analysis

Management-related outcomes and radiographic findings of idiopathic condylar resorption: a systematic review

Changes of the condylar position after modified disk repositioning: A retrospective study based on magnetic resonance imaging. Oral Surg Oral Med Oral Pathol Oral Radiol

Three-dimensional quantitative assessment of surgical stability and condylar displacement changes after counterclockwise maxillomandibular advancement surgery: Effect of simultaneous articular disc repositioning

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations

Disc repositioning by open suturing can acquire stable TMJ and jaw position when combined with orthognathic surgery. The condyles had good adaptative changes after surgery during mandibular function.Abbreviations ADD: Anterior disc displacement; TMJ: Temporomandibular joint; ICR: Idiopathic condylar resorption; BSSRO: Bilateral sagittal split ramus osteotomy. 

Ready to submit your research Ready to submit your research ? Choose BMC and benefit from:? Choose BMC and benefit from: