key: cord-0953595-7n77j4nx
authors: Lee, Jaeyong; Worrall, Liam J.; Vuckovic, Marija; Rosell, Federico I.; Gentile, Francesco; Ton, Anh-Tien; Caveney, Nathanael A.; Ban, Fuqiang; Cherkasov, Artem; Paetzel, Mark; Strynadka, Natalie C. J.
title: Crystallographic structure of wild-type SARS-CoV-2 main protease acyl-enzyme intermediate with physiological C-terminal autoprocessing site
date: 2020-11-18
journal: Nat Commun
DOI: 10.1038/s41467-020-19662-4
sha: de8faa7b8892a5fe315662dd35ea26dea8891b1d
doc_id: 953595
cord_uid: 7n77j4nx

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), the pathogen that causes the disease COVID-19, produces replicase polyproteins 1a and 1ab that contain, respectively, 11 or 16 nonstructural proteins (nsp). Nsp5 is the main protease (M(pro)) responsible for cleavage at eleven positions along these polyproteins, including at its own N- and C-terminal boundaries, representing essential processing events for subsequent viral assembly and maturation. We have determined X-ray crystallographic structures of this cysteine protease in its wild-type free active site state at 1.8 Å resolution, in its acyl-enzyme intermediate state with the native C-terminal autocleavage sequence at 1.95 Å resolution and in its product bound state at 2.0 Å resolution by employing an active site mutation (C145A). We characterize the stereochemical features of the acyl-enzyme intermediate including critical hydrogen bonding distances underlying catalysis in the Cys/His dyad and oxyanion hole. We also identify a highly ordered water molecule in a position compatible for a role as the deacylating nucleophile in the catalytic mechanism and characterize the binding groove conformational changes and dimerization interface that occur upon formation of the acyl-enzyme. Collectively, these crystallographic snapshots provide valuable mechanistic and structural insights for future antiviral therapeutic development including revised molecular docking strategies based on M(pro) inhibition.

S ARS-CoV-2 main protease (M pro ) is one of two cysteine proteases necessary for viral replication and assembly, with analogous functional counterparts in earlier SARS-CoV-1 and Middle Eastern Respiratory Syndrome (MERS) coronavirus variants 1 . SARS-CoV-2 M pro is 306 residues in length corresponding to residues 3264-3569 within the large polyproteins pp1a or pp1ab (generated by a ribosomal frameshift during translation). It is denoted by enzyme commission number EC: 3.4.22 .69 within the Merops Database Classification subclan PA (C) and family C30. Initial structures of SARS-CoV-1 M pro (~96% identical to SARS-CoV-2 M pro ) showed a dimer with each protomer composed of a double-barreled catalytic region, with structural similarity to 3C protease found in picornaviruses (and thus its alternate name 3C-like protease 3CL pro ), that is followed by an all α-helical domain 2, 3 . The structures also suggested the enzyme employs a cysteine (Cys145) side chain thiolate as a nucleophile in the presumed initial acylation step of peptide bond cleavage, potentially assisted by an adjacent histidine (His41) in the enzyme active site (see Supplementary Fig. 1a for reaction schematic). M pro cleavage of pp1a and pp1ab at the 11 sites, including autoprocessing sites at its own N-and C-termini, releases nonstructural proteins (nsp) 4-16. SARS-CoV-1 M pro has been shown to proteolyze dodecapeptides spanning each of the 11 processing sites ( Supplementary Fig. 1b) , cleaving after glutamine in the consensus sequence (P2:Leu/Met/Phe/Val)-P1: Gln↓-(P1′:Ser/Ala/Gly/Asn) with the two peptides corresponding to the N-and C-terminal M pro autocleavage sites having the highest efficiency 4 .

Although crystallographic structures of SARS-CoV-2 M pro are compounding weekly in the literature, in native forms [5] [6] [7] and with various bound chemical fragments 5 or inhibitors 7-10 , a missing link for SARS-CoV-2 M pro and indeed its SARS-CoV-1 and MERS-CoV relatives, remains the lack of atomic resolution information for key intermediary mechanistic steps with native active site and physiological substrate(s). To that end, in this paper, we present the structure, at 1.95 Å resolution, of the wildtype acyl-enzyme intermediate of SARS-CoV-2 M pro covalently bound to its natural autocatalytic processing site at its Cterminus. Capture of this intermediate provides atomic details of the acyl-enzyme coordination geometry and stabilization, the surrounding solvation/desolvation, as well as the underlying substrate specificity determined by side chain type and orientation of the P1-P6 residues-SGVTFQ-with those of the complimentary pockets in the M pro active site. Further, a product complex of the same substrate, captured at 2.0 Å resolution using a Cys145Ala mutation, is also presented, providing further mechanistic and atomic information to inform future therapeutic design.

Purification of an active M pro dimer. Recombinant SARS-CoV-2 M pro with native N-and C-termini 11 was overexpressed and purified with slight modifications of previous protocols 9 . We also produced the catalytic mutant C145A and a mutant that impacts dimerization, P9T, with similar protocols, see "Methods". Biological small-angle X-ray scattering (bioSAXS) and SEC-MALS demonstrate the wild-type protein is exclusively a dimer across a range of protein and salt concentrations, while the P9T mutant is predominantly monomeric (Supplementary Figs. 2 and 3) . Based on the published analytical ultracentrifugation results, SARS-CoV-2 M pro is known to exhibit a high propensity for dimerization with a K D~2 .5 μM (ref. 7 ). Dimerization, with the two protomers associated at right angles to form a heart-shaped complex (Fig. 1a, b) , has been shown to be critical for efficient catalytic activity in SARS-CoV-1 (ref. 12 ), with the interface interactions required for correct active site structure, including notably the N-terminus (N-finger, Ser1) of each protomer stabilizing the S1 substrate binding pocket of its neighboring protomer 2, 3 (Fig. 1c , orange surface). The wild-type M pro preparation used for our structural analysis is active in a FRET-based assay with enzymatic parameters and inhibition by the antineoplastic agent carmofur (IC 50 value of 1.8 ± 0.3 μM) consistent with those previously determined 8 ( Supplementary Fig. 4 ). As also observed elsewhere 13 , the determined Hill coefficient was greater than one, indicating positive cooperativity. Possible explanations for this, which future studies may unravel, include allosteric communication between the two active sites within the dimer upon substrate binding or, alternatively, a substrateinduced dimerization. Mutation of the catalytic cysteine to alanine (C145A) abolishes activity, while the dimerization defective P9T (with native active site) lowers the catalytic efficiency by >50 fold (Supplementary Fig. 4c ).

Crystallographic determination of M pro in complex with its Cterminal autocleavage sequence. Using X-ray crystallography, we have captured two unique structures of SARS-CoV-2 M pro in complex with its C-terminal autocleavage site in trans, representative of distinct enzyme mechanistic states. First, an acylenzyme intermediate with the C-terminal residues bound in the active site of a neighboring dimer and Gln306 covalently bound to catalytic Cys145 in the wild-type protein and, second, a product-like form with the same C-terminal autocleavage sequence observed bound non-covalently in the active site of a catalytically inactive C145A mutant.

Wild-type and C145A M pro were crystallized at pH 6 in space group C2 with isomorphous unit cell dimensions (Supplementary  Table 1 ). For both structures, the asymmetric unit is composed of an M pro dimer with crystal packing orienting the C-terminus of one monomer (chain B′) proximal to the active site of a symmetry-related monomer (chain B; Fig. 1b ). In the mature enzyme (residues 1-306), the C-terminal autocleavage sequence Ser301-Gln306 packs at the dimerization interface as observed in chain A; however, in chain B it is instead rotated almost 180°t oward domain III and inserted into the neighboring active site, occupying the S6-S1 substrate binding pockets (Fig. 1c) . This results in one protomer with substrate bound and one empty in each dimer pair. For the wild-type acyl-enzyme intermediate complex, there is clear continuous density showing the carbonyl carbon atom of the C-terminal Gln306 covalently bound to the sulfur atom of catalytic Cys145 ( Fig. 1d and Supplementary  Fig. 5a ). The C-terminal autocleavage site binds within the substrate binding groove in an extended conformation (Figs. 1c and 2a, b), making antiparallel β-sheet, as well as side chainmediated hydrogen bond interactions with residues 164-166 of βstrand 12 (see Supplementary Fig. 6 for numbering) on one side, and with residues 189-191 of the~15 residue loop linking domains II and III on the other ( Fig. 2a and Supplementary  Fig. 7a ). For the C145A mutant product-like complex, the Cterminus binds in the same extended manner, forming analogous main chain and side chain interactions ( Supplementary Fig. 7b ). Well-ordered electron density unambiguously confirms the alanine mutation and presence of terminating main chain carboxylate oxygens ( Fig. 3a and Supplementary Fig. 5b) . Supplementary  Fig. 7a ), providing an ideal oxyanion hole interaction. The closest approach of the thioester sulfur of Cys145 to the potential general acid/base His41 is a distance of 3.7 Å to its Nε2, and at an angle not in keeping with a direct hydrogen bond. The general disposition of the Cys145 Sγ to substrate P1 carbonyl delineate a Reface attack in the acylation step (Fig. 2c) . The His41 imidazole is packed between the side chains of Pro39 and Met49, with Nδ1 hydrogen bonding to a highly ordered, multi-coordinated (His164, Asp187 side chains), and buried water molecule, previously proposed to play a role in regulating the protonation state of His41 in SARS-CoV-1 via QM/MM calculations 14 . The solvent accessible surface of the His41 imidazole Nε2 calculated by Areaimol 15 is almost fully buried, with a value of 1.4 Å 2 , as compared to the free active site, 7.9 Å 2 , a factor likely influencing the pK a , protonation state, and potential role in catalysis. Anchored by the covalent thioester bond to Cys145, oxyanion hole coordination, and extended β-sheet hydrogen bonding of substrate and active site, the P1-P6 (QFTVGS) specificity determinants are accommodated within the inward facing enzyme cleft pockets S1, S2, and S4 (Fig. 1c) , providing multiple stabilizing noncovalent interactions ( Supplementary Fig. 7a ) and collectively 512 Å 2 of buried enzyme surface. Notably, the presence of a phenylalanine in the P2 position results in a wider binding pocket compared to the empty active site forms, created by shifts of the side chains of Met165 and Gln189 to accommodate, with the side chain amide of the latter redirecting to form stabilizing hydrogen bonds with the P4 main chain atoms ( Fig. 1c and Supplementary Fig. 7) . Overlap of the acyl-enzyme intermediate structure with the wild-type substrate-free structure (that determined here, as well as the highest resolution published structure PDB 6YB7) shows that the binding of substrate results in a significant outward shift and increase of overall width of the substrate binding groove (Fig. 2a) . Residues making up the outer edge of the binding site adjust up to 1.5 Å on one side (residues 187-191) and up to 1.0 Å on the other side (residues 165-168), Fig. 2 Comparison of wild-type acyl-enzyme intermediate and substratefree M pro structures. a Superposition of the substrate-free (black) and acyl-enzyme (blue) forms reveals changes in the substrate binding groove width. The main chain atoms for bound B′ substrate are shown as transparent van der Waals spheres. b Molecular surface of wild-type M pro with three-ordered water molecules (cyan spheres). Superposition of the acyl-enzyme structure shows these waters are coincident with oxygen atom positions and will be displaced upon substrate binding. c Analysis of the wild-type acyl-enzyme active site reveals a potential deacylating water (catalytic/nucleophilic-W cat ) approaching the Re-face of the thioester. Ball and stick diagram depicting the geometry and atomic interactions of the thioester linkage between the Sγ of Cys145 and main chain carbonyl carbon of substrate Gln306. The trigonal planar nature of the thioester group, defined by atoms Cα, C, and O of Gln306, and Sγ of Cys145 is shown as is the χ 1 dihedral angle (defined by atoms N, Cα, Cβ, and Sγ). The oxyanion hole hydrogen bond distances and angles are also labeled. Proposed deacylating water (W cat ) shown as a cyan sphere. α BD is the Bürgi-Dunitz angle (W cat -C=O) and d a the attack distance. NATURE COMMUNICATIONS | https://doi.org/10.1038/s41467-020-19662-4 ARTICLE both regions which directly bind substrate, suggesting an unusual expansion of the binding groove rather than constriction typical of most serine proteases 16 is required for the C-terminal autoprocessing substrate to optimally fit into the M pro active site. Interestingly, if the same overlap is done with the empty protomer (chain A) in the acyl-enzyme intermediate or product complex dimers, this expansion is only observed for residues 187-191 and to a lesser degree, suggesting possible allosteric communication between the two protomers of the active dimeric form upon substrate binding.

Important aspects of solvation/desolvation in formation of the acyl-enzyme intermediate are also interpreted from our data. Displacement of three highly ordered water molecules visible in the wild-type substrate-free structure occupy the position of the substrate carboxyl oxygen in the oxyanion hole, the Gln306 (P1) side chain oxygen, and Thr304 (P3) main chain carbonyl oxygen (Fig. 2b) . These same highly ordered water molecules are typically observed in other SARS-CoV-2 M pro structures, including the highest resolution structure yet reported at 1.25 Å (ref. 5 ; PDB 6YB7), although in that case a DMSO molecule is observed in the P1 site with the sulfoxide oxygen overlapping the water binding location. Notably, an additional, unique water position, in keeping with that of a deacylating water nucleophile, is observed in the acyl-enzyme intermediate structure, with weak but significant density (Fig. 1d ). Positioned orthogonally with respect to the other atoms in the trigonal planar thioester group (Fig. 2c) , the 1.95 Å resolution allows for a measurement of the approximate attack angle that the oxygen of this water (upon activation, the hydroxide anion, OH − ) would take relative to the substrate carbonyl carbon. The angle, often termed the Bürgi-Dunitz angle (α BD ) 17 , is defined by three atoms: the nucleophile (in this case a water oxygen O), the carbonyl carbon C, and the carbonyl oxygen O (O---C=O angle), with the generalized ideal falling near 107°. The putative deacylating water sits approximately equidistant between the Nε2 of His41 in the acyl-enzyme (2.9 Å), reinforcing its role as the activating general base, and the scissile carbonyl carbon (2.7 Å) and with a Bürgi-Dunitz angle as above of~82°. Displacement of catalytic water molecules is a reoccurring theme in structure-based drug discovery and the observation of this water position in the context of the acyl-enzyme intermediate is an important advance in this regard (discussed further below).

Given the typically short-lived nature of the acyl-enzyme catalytic intermediate during proteolysis, capturing these has been historically challenging. There has been some previous success in characterizing acyl-enzyme species at the atomic level in serine proteases, but these experiments typically required some level of impairment to the enzyme 18-20 , substrate (non-hydrolyzable adduct, poor substrates, or inhibitors), and/or conditions 21-24 for a stable acylation to be observed in the crystal structure. No prior examples in the classic cysteine protease families proper have been published, although a putative cysteine protease-like glutathione hydrolase acylated with glutathione substrate captured at pH 3 has been described 25 (histidine base deprotonation highly disfavored at this extreme pH). Here, the trans acylenzyme complex of full-length, wild-type M pro is observed in the crystallographic lattice with the endogenous P1-P6 C-terminal product of symmetry-related molecule B′ binding into the active site cleft of molecule B. The reaction the enzyme has catalyzed within the crystal is the reverse reaction, it is presented with the product (the free carboxylate of Gln306 (P1) from B′), and it has formed the acyl-enzyme by creating the thioester with the nucleophile Cys145 (see Supplementary Fig. 1a for reaction schematic). It is possible that the local effective concentration of the product as afforded by the crystal lattice has contributed to driving the reaction backward to the form the thioester. The crystals were grown at pH 6, theoretically not low enough to prevent a solvent accessible histidine (pK a~6 .5) from functioning as a general base to activate a deacylating/nucleophilic water, but certainly disabling optimal activity (estimated kinetically at <50% in SARS-CoV-1 using a pentadecapeptide substrate spanning the C-terminal cleavage site 26 ). Given the observed putative deacylating water, with appropriate distances of histidine base to water to thioester intermediate, we can only further speculate that the slightly less than optimal angle of attack by the nucleophilic water,~82°instead of the theoretical optimum of 107°, as predicted by Bürgi-Dunitz could also contribute to the intermediate capture here.

Crystallographic structure of the SARS-CoV-2 M pro C145A product complex with physiological substrate. Capture of a well-ordered product complex in the catalytically impaired SARS-CoV-2 M pro C145A mutant is clearly defined in the electron density maps (Fig. 3a and Supplementary Fig. 5b ). One oxygen of the terminating carboxylate sits coincident with that of the carbonyl of the thioester acyl-enzyme intermediate structure, forming hydrogen bonded interactions with the oxyanion hole main chain nitrogens of 2.9 and 3.0 Å ( Fig. 3c and Supplementary  Fig. 7b ). The second carboxylate oxygen is positioned to form a strong inline hydrogen bond interaction with His41 Nε2 (2.9 Å), again supporting a role of the latter in general base activation of a nucleophilic water to form such a product. In that context, the active site of the empty protomer in the C145A structure reveals electron density for five water molecules, including one not observed in the wild-type substrate-free protomer active site and lying completely coincident with the proposed deacylating water position in the acyl-enzyme intermediate above, only observed at even greater occupancy (Fig. 3b, c) . The ordered water (B-factor = 30 Å 2 ), is again positioned orthogonally with respect to the other atoms in the trigonal planar thioester group and with a near identical Bürgi-Dunitz angle as verified by superposition of the substrate-free active site of the C145A and native acyl-enzyme structures (Fig. 3c) . We note a structure of SARS-CoV-1 M pro C145A in a product complex with its C-terminal autocleavage site at 2.8 Å resolution has been published previously 27 ; however, potentially due to the lower resolution a catalytic water was not observed in that case.

Model of the SARS-CoV-2 M pro enzyme-substrate complex. An interesting aspect of viral polyprotein processing proteases, including SARS-CoV-1 and -2 M pro , are the requisite selfcleavage events to excise itself from precursor polyproteins result in a retained C-terminal product (P1-P6 as captured here) that could potentially act as a competitive inhibitor. By contrast, the N-terminal autoprocessing P1-P6 sequence (and C-terminal end of nsp4) departs after cleavage. Considering the M pro consensus cleavage sequence (P2:Leu/Met/Phe/Val)-P1:Gln↓-(P1′:Ser/Ala/ Gly), 9 out of the 11 in SARS-CoV-2 have a leucine in the P2 position, including the M pro N-terminal (nsp4-nsp5) autoprocessing sequence (Supplementary Fig. 1b) . Structures of SARS-CoV-1 M pro in complex with the N-terminal sequence 28 or of SARS-CoV-2 M pro in complex with peptidomimetic inhibitors based thereon 8 reveal the S2 subsite undergoes dramatic changes when it binds leucine in the P2 position, predominantly mediated by rearrangement of Met49 and Gln189, and surrounding regions. By contrast, the M pro C-terminal autocleavage site in both SARS-CoV-1 and -2 is the only instance where there is a P2 phenylalanine which, when bound to the S2 subsite as observed here, maintains a more open conformation similar to the empty active site, albeit with movement of Met165 creating a deeper pocket. A structure of a SARS-CoV-1 M pro C145A mutant in complex with its C-terminal prosequence at 2.2 Å resolution has been published previously 29 , representing an enzyme-substrate (ES) Michaelis-like complex (Fig. 4a) . With Phe305 (P2) bound in the S2 subsite, Phe309 (P3′) was observed to bind in an adjacent complimentary pocket with mutation of Phe309 (P3′) reducing C-terminal cleavage. This multivalent binding interaction in S2 and the S3′ subsites was proposed to be needed to allow highaffinity binding of the C-terminal prosequence, supported by the 10× lower-affinity binding of the C-terminal P1-P4 sequence with Phe (P2) than the equivalent N-terminal sequence with Leu (P2) 29 . Although it was further suggested that Phe309 S3′ binding would be needed to order the adjacent S2 subsite, thus potentially avoiding autoinhibition by the retained post-cleavage mature Cterminal sequence, the structures here show that these subsites are equivalently in place in the substrate-free native, acyl-enzyme intermediate and product complexes (Fig. 4) .

Based on the wild-type acyl-enzyme intermediate structure here, we have generated a model of the SARS-CoV-2 ES Cterminal complex, extending from P6-P1 the downstream residues encompassing P1′-P4′ (Fig. 4b) . Although the P1′-P3′ positions in the SARS-CoV-2 C-terminal processing site are distinct compared to SARS-CoV-1 (SAV vs GKF, respectively), the structure of the S3′ subsite region is near identical (RMSD = 0.363 Å on 50 common atoms) with the only differences compared to SARS-CoV-1 an A46S substitution on one edge of the cavity that could provide, along with the Ser307 (P1′), van der Waals interactions with the smaller P3′ valine (Fig. 4b) . From the model, it is apparent that Val309 (P3′) has less optimal complementarity for the broad S3′ pocket compared to the bulky aromatic Phe309 (P3′) of SARS-CoV-1. The smaller hydrophobic side chain may be needed to accommodate binding to S3′ in the presence of the spatially adjacent P1′ Ser. In SARS-CoV-1, P1′ is a uniquely observed glycine ( Supplementary Fig. 1b) , providing the main chain torsion and lack of a side chain needed to be sterically compatible with the bulkier phenylalanine occupying the S3′ subsite 28 . Regardless, the potential buried surface of adjacent SARS-CoV-2 P1′ Ser and P3′ Val provides noncovalent interactions, presumably sufficient to facilitate the multivalent prime side subsite binding along with Phe305 (P2) to promote cleavage 29 . Further, His41 Nε2 is readily positioned inline and within hydrogen bond distance of the P1′ main chain nitrogen, supporting its general base role in leaving group protonation during acylation and in keeping with recent QM/MM studies 30 . In addition, we note the P1′ substitution of a serine as described above places its side chain hydroxyl adjacent and within hydrogen bonding distance to His41 Nε2.

The side chain amide of Asn142 also appears to be a point of conformational plasticity: in the acyl-enzyme intermediate and product complexes, with nothing bound in S2′, it is swung towards that subsite, however, in the ES complex with occupied S2′, this rotamer would be sterically prohibited and instead is redirected to stack over the P1 Gln306 in the SARS-CoV-1 ES complex structure (Fig. 4a) , potentially reinforcing binding of this key subsite and ensuring maximal substrate affinity only when S2′ is occupied, and in turn disfavoring autoinhibition by C-terminal product. Finally, we also observe some small conformational differences in substrate binding between the SARS-CoV-1 ES complex and our structures here. These include the main chain atoms and rotameric state of the Val303 (P4) side chain and adjacent Met165 side chain upon which it packs, potentially perturbed by the amide side chain rotamer and main chain contacts of Gln189 in the SARS-1-CoV ES complex structure.

Implications for drug discovery. SARS-CoV-2 M pro is a major focus of antiviral drug discovery to treat COVID-19. The structures reported here provide critical information on targeting the mechanistic features and active site structure, as well as a variably exposed pocket at the dimerization interface described below.

The M pro active site is necessarily malleable to accommodate binding of the 11 endogenous cleavage targets. In particular, the S2 subsite is significantly altered when bound to the N-terminal autoprocessing sequence with Leu (P2), as observed in complex with a SARS-CoV-1 M pro H41A mutant 28 (referred to as Leu-S2 like) compared to that captured here in complex with the wildtype SARS-CoV-2 C-terminal autoprocessing sequence (referred to as Phe-S2 like). Echoing the substrate diversity, varied hydrophobic substituents in previously characterized inhibitors have been found to bind the S2 site 7,8,10,31 . For example, designed peptidomimetic covalent aldehyde inhibitors 11a and 11b differ only in their P2 substituent with cyclohexyl or 3-fluorophenyl moieties, respectively (Fig. 5b, c and Supplementary Fig. 8 ). The cyclohexyl group resembles the binding of leucine, stacking with the His41 side chain, and induces a Leu-S2-like orientation of Met49. Conversely, the 3-fluorophenyl of 11b superposes near perfectly with Phe305 (P2) in our structure with a S2 subsite correspondingly in a Phe-S2 conformation. Both are promising lead inhibitors with IC 50 values~0.05 μM supporting drug design strategies targeting both S2 site conformations. Given the shared Phe (S2) and Phe (S3′) binding sites in the SARS-CoV-1 ES complex (Fig. 4a) , and observation here that this site is preformed even in the absence of prime side residues, exploring the S3′ pocket represents a promising approach to improve inhibitors binding the Phe-S2 site. The most active noncovalent inhibitor of SARS-CoV-1 or -2 M pro reported to date, compound 17a, is a derivative of a compound observed to bind both the Phe-S2 and S3′ sites of SARS-CoV-1 M pro (refs. 32, 33 ) . In absence of an experimental structure, we docked 17a to the active site of the SARS-CoV-1 ES-like complex (PDB 5B6O). Superposing also with the SARS-CoV-2 ES complex model shows that one of the Supplementary Fig. 1b . Note the identical sequence preceding the scissile bond between SARS-CoV-1 and -2 M pro , but divergence in P1′-P3′ (Nterminus of the subsequent nsp6). Despite these differences, the S1′-S3′ pockets observed in the SARS-CoV-2 M pro acyl-enzyme active site are similar to that in (a), i.e., already preformed in the absence of P1′-P3′ (modeled here), and apparently not dependent on the binding of P2′. It is also evident from this panel that the P1′-P3′ side chains are not sterically matched to the S1′-S3′ pockets, perhaps an advantage in protein maturation. Fig. 5d ). We note the only substitution between SARS-CoV-1 and -2 M pro in the S3′ site-A46S-is in close proximity to the phenyl biaryl and the Ser46 hydroxyl could be a unique site to engage for further development. Thus, the structures here in complex with the Cterminal sequence provide a template for structure-based design of inhibitors targeting the Phe-S2 and S3′ sites, which could not be rationally designed using M pro structures with the Leu-S2 active site conformation.

To this end, we have analyzed the SARS-CoV-2 M pro active site structures of the crystallographic fragment screening effort by Walsh and colleagues 5 that identified 71 noncovalent and covalent binding small molecules. Fragments were screened by soaking crystals with the same form as the substrate-free wildtype structure here. In these crystals, the empty active site resembles the more open Phe-S2 like conformation seen in complex with the C-terminal autocleavage site. Functional groups from both noncovalent and covalent bound fragments were observed to occupy the S2 subsite. Flexibility in S2 to accommodate binding was observed for some fragments, but the vast majority stabilized the Phe-S2 like conformation, with an aromatic functionality repeatedly observed to form hydrophobic interactions with Met49, mimicking the Phe305 (P2) interaction observed here (Fig. 5g, h) . The preference for the Phe-S2 binding fragments could suggest that, although inducing the Leu-S2 like conformation was possible within the crystal, the limited binding interface of the small fragments used coupled with the initial Phe-S2 like starting structure of the substrate-free crystals used for soaking could skew the resulting binding toward this active site conformation. Several S2 site binding fragments also bind the S3' site (Fig. 5g, h) . Further to the discussion above, these fragments could represent promising starting points for development, especially by combining with those observed to bridge S2 with other subsites, for example, x0434 with overlapping S2 bound benzyl ring and a pyridine ring binding the S1 subsite (Fig. 5g) .

The structures presented here also provide information on active site solvation, the consideration of which is valuable for drug design. In addition to the well-ordered active site waters we observe, which are displaced by the C-terminal substrate (Fig. 2b) , we also describe a putative deacylating water observed in both the acyl-enzyme intermediate and the empty active site protomer of the C145A mutant product complex (Fig. 2c) . Interestingly, structures of alpha-ketoamide inhibitors, including 13b (ref. 7 ; Fig. 5e ), and hepatitis C antivirals boceprevir (PDB 6WNP) and telaprevir (PDB 7C7P; Fig. 5f ), show they position carbonyl oxygens superposing with both this catalytic water and the one occupying the oxyanion hole, allowing two direct hydrogen bond interactions with the catalytic center. Notable for boceprevir and telaprevir, the P1 cyclobutyl or propyl groups do not fill the S1 site, and two waters are present overlapping with the waters we observe displaced by the C-terminal Gln (P1) side chain amide deep in the S1 pocket (Fig. 5f ). Extending the P1 moieties to displace these waters to bulk solvent could be a means to improve binding. In addition, and following on our prior discussion, we also note that for these promising alpha-ketoamides, which promote the Phe-S2 conformation of SARS-CoV-2, an extension of their P1′ phenyl, amide, or cyclopropane groups into the adjacent S3′ site would also be a possible design strategy for improved potency.

Finally, our structures also define a distinct binding site exposed due to the alternate positions of the C-terminal autocleavage sequence (Fig. 6a) . In the mature enzyme here and in prior structures, Ser301-Gln306 typically pack at the dimerization interface, with Phe305 buried in a hydrophobic pocket defined by Phe8, Pro9, Ile52, Phe294, and the Arg298 propyl moiety of the same chain (Fig. 6b) . This region is critical to dimerization and enzymatic activity, and many mutations affecting both map to this site (for review of these see 12 ) , including mutation of Pro9 to threonine (P9T) identified and characterized here, which shows significantly diminished dimerization and activity ( Supplementary Figs. 2-4) . In the catalytic snapshots captured here, when the C-terminal autocleavage site is inserted into a neighboring dimer active site, this pocket becomes more solvent exposed (Fig. 6c) and is also modulated by the movement of domain III helix J (harboring Phe294 and Arg298; Supplementary Fig. 6a ). Protein-protein interaction interfaces are being increasingly targeted for drug discovery 34 (c) . b The C-terminus of chain A (orange VdW representations) is packed at and stabilizes the dimerization interface (blue and oranges surfaces), an interaction typical of the mature dimer. c In the acyl-enzyme and product complexes, chain B redirects its C-terminus~180°( blue VdW representations) as also shown in (a), allowing capture within the active site cleft of a neighboring dimer in the crystal, with the extended peptide binding groove at the dimerization site now exposed (delineated by black ellipse). A recent structure-based fragment screen found several small molecules bound within this region including compound x1187 (magenta spheres; PDB 5RFA).

role of oligomerization in M pro activity suggests that targeting of the dimerization interface with small molecules that could inhibit self-association or interfere with the inter-subunit allosteric regulation of enzymatic activity represents a promising approach.

In validation of this site as druggable, Walsh and colleagues identified two small molecules from a crystallographic fragment screen that were found to bind deep into the pocket 5 (Fig. 6c) .

In this context, the M pro structures presented here with the Cterminal autocleavage site bound as an acyl-enzyme intermediate or product form provides a C-terminal substrate-bound active site conformation that can be used to delineate atomic details of the mechanistic pathway, and optimize current inhibitor hits and design highly potent, novel M pro inhibitors. We are currently exploring these drug design strategies with our recently described in silico deep docking methodology 35 .

Cloning, protein production, and purification. The gene encoding full-length SARS-CoV-2 M pro with an additional N-terminal AVLQ and C-terminal GPHHHHHH was ordered from Twist Bioscience codon optimized for expression in Escherichia coli (Supplementary Table 3 ). The gene was cloned between the BamHI and XhoI restriction sites of plasmid pGEX-6P-1 (Supplementary Table 3) for expression of the protein with native N-and C-termini 11 . Mutant C145A was generated using QuickChange site-directed mutagenesis (Supplementary Table 3 ). Mutant P9T was a point mutant from cloning the full-length gene. Sequences were confirmed by DNA sequencing.

Protein expression was carried out in E. coli BL21 (DE3). Cells were grown at 37°C in LB media supplemented with 0.1 mg/mL ampicillin. At OD 600~1 , the temperature was reduced to 16°C, and protein expression was induced with addition of IPTG to 1 mM. Cells were harvested after 5 h, resuspended in lysis buffer (50 mM Tris pH 8, 300 mM NaCl, 1% triton-X100, 10 mM MgCl 2 , and 0.01 mg/mL DNase I), and lysed with an Avestin Emulsiflex C5. The lysate was centrifuged at 50,000 × g for 45 min and the soluble protein was loaded onto gravity flow column packed with 5 mL HisPur Ni-NTA resin (ThermoFisher Scientific) equilibrated in the lysis buffer with 20 mM imidazole. The column was washed with ten column volumes of equilibration buffer, ten column volumes of the buffer with 40 mM imidazole, and eluted with 50 mM Tris pH 8, 300 mM NaCl, and 200 mM imidazole.

For the wild-type and P9T mutant protein, which cleave off the N-terminal GST tag during expression to leave the native N-terminus, the eluate was concentrated by ultrafiltration (Amicon Ultra-30; Millipore Sigma) and the buffer was exchanged into 50 mM Tris pH 8, 300 mM NaCl, and 1 mM DTT to a final volume of 3 mL. The C-terminal His-tag was removed with HRV 3C (Millipore Sigma) incubated overnight at 4°C. Uncleaved M pro and the His-tagged HRV 3C were removed with a 0.5 mL HisPur Ni-NTA resin before further purification by gel filtration chromatography with a Sephacryl S-200 HR 16/60 column (GE Healthcare) equilibrated in 50 mM Tris pH 7.4, 1 mM EDTA, and 1 mM DTT.

Because the C145A mutant is inactive, wild-type, His-tagged M pro was added to the eluate from the initial IMAC step at a 40:1 ratio, and the mixture was dialyzed overnight against 50 mM Tris pH 8.0, 300 mM NaCl. The retentate was then incubated sequentially with 0.5 mL Glutathione Sepharose resin (GE Healthcare) equilibrated in dialysis buffer and 0.5 mL HisPur Ni-NTA agarose resin equilibrated in the same buffer with 20 mM imidazole to remove the GST tag and His-tagged wild-type M pro , respectively, while the flow through and washes were collected. The C-terminal His-tag was removed with HRV 3C before further purification by gel filtration chromatography with a Superdex 200 Increase 10/300 GL column (GE Healthcare), as described above.

All proteins were concentrated to 10 mg/mL and frozen in liquid nitrogen for storage at −80°C until needed.

Analysis of protein quaternary structure. The molar masses of wild-type M pro and the P9T variant were determined at 22°C with a size-exclusion chromatography system equipped with a Superdex 200 HR 10/300 GL column (GE Healthcare), an Agilent 1100 series HPLC pump and UV detector (Agilent Technologies), a Dawn Heleos II 16-angle light-scattering detection module and an Optilab T-rEX differential refractometer (Wyatt Technology). The mobile phase was 50 mM Tris pH 7.3, 150 mm NaCl, and the flow rate was 0.4 mL/min. Data acquisition and analysis were achieved with Astra 6 software platform provided by Wyatt. The light-scattering detectors were normalized with monomeric bovine serum albumin (Sigma-Aldrich). A 100 μL aliquot of each protein (2 mg/mL) was injected into the column at a time, and the column was washed with at least one column volume between samples. The protein absolute molecular mass was calculated assuming a specific refractive index increment (δη/δc) value of 0.185 mL/g and a theoretical extinction coefficient of 0.973 mL/mg/cm.

BioSAXS data were collected with in-house X-rays (1.54 Å) and a Rigaku bioSAXS-2000 (Rigaku Corporation). Scattering profiles of purified wild-type SARS-CoV-2 M pro were collected at 9.63, 4.82, 2.41, and 1.20 mg/mL and the P9T M pro variant at 24.49, 12.25, 6.12, 3.06, 1.53, and 0.77 mg/mL. Twelve consecutive frames of 5 min in length were collected for each profile, corrected by subtracting the background scattering of the dialysis buffer (50 mM Tris pH 7.4, 1 mM DTT, and 1 mM EDTA), and normalized in concentration. Processing up to this point was carried out using SAXSLab (Rigaku Corporation). Further processing was performed with components of the ATSAS software package 36 . An extrapolated 0.00 mg/mL curve was generated for each of the samples. For the wild-type M pro sample, the crystal structure of the M pro dimer (PDB ID 6M03) was compared to the experimental data using CRYSOL 37 . For the P9T M pro sample, chain A of the same structure was compared to the experimental data, with rather poor fit. As this result may stem from a slightly less restrained state of M pro as a monomer, SREFLEX 38 was used to allow for more flexible fitting of the PDB to the experimental data. To ensure that NaCl and DMSO were not affecting the dimerization state of M pro , bioSAXS data for various samples of 1 mg/mL M pro with the addition of NaCl and DMSO were collected, and processed as above. OLIGOMER 39 volume fraction analysis was used, with the 0.00 mg/mL extrapolated curves used as a basis for the dimer and monomer fractions. Full SAXS sample details, data collection parameters, software, structure parameters, and modeling statistics are listed in Supplementary Table 2 .

Enzymatic activity. The protease activity of recombinant wild-type M pro was assayed at 27°C with the FRET-based peptide substrate (MCA)AVLQ/SGFRLys (Dpn)-Lys-NH 2 (GL Biochem, Shanghai) essentially as described 7, 8, 31, 40 . The fluorescence of 7.5 μL aliquots of this substrate in 50 mM Tris buffer, 2 mM EDTA, pH 7.3, and 10% DMSO was monitored with a BioTek Synergy H4 microplate reader (330 nm excitation, 390 nm emission, and 9 nm slit band widths) for 3 min immediately before addition of 7.5 μL of enzyme in the same buffer to start the reactions. For enzymological characterization the final M pro concentration was 100 nM, while that of the substrate spanned the range between 0.5 and 100 μM. The initial rates of reaction, collected in triplicate at each substrate concentration, were determined from the linear regions observed during the first 3 min of each reaction. After correcting these values for the inner filter effect and converting to units of cleaved product as a function of time (i.e., μM/s) using a calibration curve constructed with (MCA)-AVLQ, these initial reaction rates were then subjected to nonlinear, least squares regression analysis with the Michaelis-Menten equation using the program OriginPro (OriginLab Corp., Northampton MA) to determine the kinetic parameters K M and k cat and a Hill coefficient n, assuming a 100% active enzyme. Similarly, the dose-dependent inhibition of enzyme activity by Carmofur (Cayman Chemicals) was assayed to confirm that the recombinant M pro behaves, as described in the literature. For this assay, the enzyme was incubated with different concentrations of Carmofur for 30 min before mixing with the substrate solution to monitor the residual activity also in at least triplicate. For this assay, the final enzyme and substrate concentrations were 30 nM and 20 μM, respectively, while that of Carmofur spanned the range from 100 nM to 30 μM.

Crystallization and structure determination. Crystals of the wild-type acylenzyme or C145A mutant product complexes were obtained by sitting drop vapor diffusion using 0.8 μL of protein (~10 mg/mL) and 0.8 μL reservoir containing 0.1 M MES pH 6, 10-16% PEG 3350, and 5% MPD. Crystals were cryoprotected by increasing the PEG 3350 concentration to 35% prior to freezing in liquid nitrogen. For the wild-type acyl-enzyme crystals, the cryoprotectant solution also included 2% DMSO. Wild-type substrate-free crystals were obtained as above from a reservoir containing 0.1 M MES pH 6.5, 15-20% PEG 3350, with streak seeding used to obtain diffraction quality crystals. Diffraction data were collected at 100 K on beamline 23-ID-B at the Advanced Photon Source (wild-type acyl-enzyme and substrate free; 1.03317 Å wavelength), or on a Rigaku MicroMax 007 HF generator equipped with Osmic VariMax optics and a Dectris Pilatus3 R 200 K detector (C145A mutant; 1.5417 Å wavelength). Both wild-type acyl-enzyme and C145A mutant product complex crystals belong to space group C2 with isomorphous unit cell dimensions and two molecules in the asymmetric unit (Supplementary Table  1 ). The wild-type substrate-free crystals also belong to space group C2 but with different crystal packing and only one monomer in the asymmetric unit (Supplementary Table 1 ). The wild-type acyl-enzyme and substratefree data were processed using xia2 (ref. 41 ) and XDS 42 , and the C145A mutant with the CrysAlis Pro software suite (Rigaku Inc.). Data reduction was carried out using Aimless 43 as part of the CCP4 package 15 . The wild-type acyl-enzyme and product data exhibited anisotropy as assessed with the Diffraction Anisotropy Server 44 . Both non-truncated and truncated data were used in refinement and map calculations to assist interpretation. Phasing was carried using molecular replacement with Phaser 45 as part of the CCP4 package, using PDB 6LU7 as a search model. Sequential rounds of model building and refinement were carried out using Coot 46 , Refmac 47 , and Buster 48 . Validation of the final models was carried out using MolProbity 49 with excellent stereochemical model statistics, see Supplementary Table 1 . The wild-type acyl-enzyme intermediate model has a Molprobity score of 1.98, clashscore of 4.16 and 96.88% Ramachandran favored, and 0% Ramachandran outliers. The C145A product complex has a Molprobity score of 1.74, clashscore of 2.67 and 97.04% Ramachandran favored, and 0.33% Ramachandran outliers. The wild-type substrate-free model has a Molprobity score of 1.37, clashscore of 3.64 and 98.68% Ramachandran favored, and 0.33% Ramachandran outliers.

Secondary structure analysis was carried out using STRIDE 50 . Solvent accessible and buried surfaces were calculated using Areaimol 15 . All structure analysis and figure preparation was carried out with PyMOL (The PyMOL Molecular Graphics System, Version 2.1 Schrödinger, LLC) and Chimera 51 .

Docking. Before docking, protein structures were optimized using Protein Preparation Wizard module (Small-Molecule Drug Discovery Suite 2019-1, Schrödinger LLC, New York, NY, USA 2019). Docking grids were centered to the Cterminal substrates. Ligands were prepared using OpenEye's tautomers module, in order to assign the correct ionization and tautomeric form at pH 7.4 (QUACPAC 2.0.2.2. OpenEye Scientific Software, Santa Fe, NM, USA 2019). One low-energy 3D conformation was generated for each ligand, using Openeye's omega program in classic mode 52 . Docking was performed with Glide Single Precision module 53 .

Reporting summary. Further information on research design is available in the Nature Research Reporting Summary linked to this article.

Structure factors and atomic coordinates have been deposited with the protein data bank with accession codes PDB ID 7KHP, 7JOY, and 7JP1. BioSAXS data have been deposited with SASBDB with accession code SASDJG5 and SASDJH5. Other data are available from the corresponding author upon reasonable request. Source data are provided with this paper.

Received: 8 August 2020; Accepted: 15 October 2020;

From SARS to MERS: crystallographic studies on coronaviral proteases enable antiviral drug design

The crystal structures of severe acute respiratory syndrome virus main protease and its complex with an inhibitor

Coronavirus main proteinase (3CLpro) structure: basis for design of anti-SARS drugs

Biosynthesis, purification, and substrate specificity of severe acute respiratory syndrome coronavirus 3C-like proteinase

Crystallographic and electrophilic fragment screening of the SARS-CoV-2 main protease

Structural plasticity of SARS-CoV-2 3CL M(pro) active site cavity revealed by room temperature X-ray crystallography

Crystal structure of SARS-CoV-2 main protease provides a basis for design of improved alpha-ketoamide inhibitors

Structure of M(pro) from SARS-CoV-2 and discovery of its inhibitors

Structural basis for the inhibition of SARS-CoV-2 main protease by antineoplastic drug carmofur

GC-376, and calpain inhibitors II, XII inhibit SARS-CoV-2 viral replication by targeting the viral main protease

Production of authentic SARS-CoV M(pro) with enhanced activity: application as a novel tag-cleavage endopeptidase for protein overproduction

Targeting the dimerization of the main protease of coronaviruses: a potential broad-spectrum therapeutic strategy

Feline coronavirus drug inhibits the main protease of SARS-CoV-2 and blocks virus replication

Evidence for substrate binding-induced zwitterion formation in the catalytic Cys-His dyad of the SARS-CoV main protease

Overview of the CCP4 suite and current developments

Enzyme:substrate hydrogen bond shortening during the acylation phase of serine protease catalysis

Stereochemistry of reaction paths at carbonyl centres

Crystal structure of the VP4 protease from infectious pancreatic necrosis virus reveals the acyl-enzyme complex for an intermolecular self-cleavage reaction

Crystal structure of a viral protease intramolecular acyl-enzyme complex: insights into cis-cleavage at the VP4/VP3 junction of Tellina birnavirus

Crystal structures of yellowtail ascites virus VP4 protease: trapping an internal cleavage site trans acyl-enzyme complex in a native Ser/Lys dyad active site

Crystal structure of elastasesubstrate complex at -55 degrees C

Structure of a specific acyl-enzyme complex formed between beta-casomorphin-7 and porcine pancreatic elastase

X-ray structure of a serine protease acyl-enzyme complex at 0.95-A resolution

Direct crystallographic observation of an acyl-enzyme intermediate in the elastase-catalyzed hydrolysis of a peptidyl ester substrate: exploiting the "glass transition" in protein dynamics

A papain-like enzyme at work: native and acyl-enzyme intermediate structures in phytochelatin synthesis

pH-dependent conformational flexibility of the SARS-CoV main proteinase (M(pro)) dimer: molecular dynamics simulations and multiple Xray structure analyses

Mechanism of the maturation process of SARS-CoV 3CL protease

Structures of two coronavirus main proteases: implications for substrate binding and antiviral drug design

SARS-CoV 3CL protease cleaves its C-terminal autoprocessing site by novel subsite cooperativity

Revealing the molecular mechanisms of proteolysis of SARS-CoV-2 Mpro by QM/MM computational methods

Structure-based design of antiviral drug candidates targeting the SARS-CoV-2 main protease

Discovery, synthesis, and structure-based optimization of a series of N-(tert-butyl)-2-(N-arylamido)-2-(pyridin-3-yl) acetamides (ML188) as potent noncovalent small molecule inhibitors of the severe acute respiratory syndrome coronavirus (SARS-CoV) 3CL protease

Discovery of N-(benzo[1,2,3]triazol-1-yl)-N-(benzyl) acetamido)phenyl) carboxamides as severe acute respiratory syndrome coronavirus (SARS-CoV) 3CLpro inhibitors: identification of ML300 and noncovalent nanomolar inhibitors with an induced-fit binding

Protein-protein interaction modulators: advances, successes and remaining challenges

Rapid identification of potential inhibitors of SARS-CoV-2 main protease by deep docking of 1.3 billion compounds

New developments in the ATSAS program package for small-angle scattering data analysis

CRYSOL-a program to evaluate X-ray solution scattering of biological macromolecules from atomic coordinates

Global rigid body modeling of macromolecular complexes against small-angle scattering data

PRIMUS: a Windows PC-based system for small-angle scattering data analysis

Design of wide-spectrum inhibitors targeting coronavirus main proteases

xia2: an expert system for macromolecular crystallography data reduction

How good are my data and what is the resolution?

Toward the structural genomics of complexes: crystal structure of a PE/PPE protein complex from Mycobacterium tuberculosis

Phaser crystallographic software

Features and development of Coot

Refinement of macromolecular structures by the maximum-likelihood method

BUSTER version 2.10.3 (Global Phasing Ltd

MolProbity: all-atom structure validation for macromolecular crystallography

STRIDE: a web server for secondary structure assignment from known atomic coordinates of proteins

UCSF Chimera-a visualization system for exploratory research and analysis

Conformer generation with OMEGA: algorithm and validation using high quality structures from the Protein Databank and Cambridge Structural Database

Glide: a new approach for rapid, accurate docking and scoring. 1. Method and assessment of docking accuracy

We thank GM/CA beamline staff at beamline 23-ID-B at the APS for access and support. 

The authors declare no competing interests.

Supplementary information is available for this paper at https://doi.org/10.1038/s41467-020-19662-4.Correspondence and requests for materials should be addressed to M.P. or N.C.J.S.Peer review information Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work.

Publisher's note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/ licenses/by/4.0/.