key: cord-0933540-fw7qt571 authors: Belhouideg, Soufiane title: Impact of 3D printed medical equipment on the management of the Covid19 pandemic date: 2020-06-22 journal: Int J Health Plann Manage DOI: 10.1002/hpm.3009 sha: 18c00a8ecabc93b3b6c53feff970500cd131ebee doc_id: 933540 cord_uid: fw7qt571 Very high mortality rates of coronavirus pandemic (COVID‐19) are observed around the world due to lack of medical equipment. The increased need for medical devices and personal protective equipment (PPE) has kept several healthcare professionals at risk. Fortunately, 3D printing technology allows to overcome the lack of medical supplies. This study highlights the impact of 3D printing on the combat against COVID19, and its importance in the medical product supply chain. Indeed, the existing medical equipment fabricated by 3D printing technology and its role in the management of Covid19 pandemic is presented. Moreover, the last works are examined to know whether the models of the medical equipment are free of use and whether useful informations are presented (eg, available design data and setup guidelines). Very high mortality rates of coronavirus pandemic are observed around the world due to lack of medical equipment. The increased need for medical devices and personal protective equipment (PPE) has kept several healthcare professionals at risk. Fortunately, 3D printing technology allows to overcome the lack of medical supplies. This study highlights the impact of 3D printing on the combat against COVID19, and its importance in the medical product supply chain. Indeed, the existing medical equipment fabricated by 3D printing technology and its role in the management of Covid19 pandemic is presented. Moreover, the last works are examined to know whether the models of the medical equipment are free of use and whether useful informations are presented (eg, available design data and setup guidelines). 19) becomes a danger to the public at the international level. [1] [2] [3] The COVID-19 is carried mainly through connection with an infected person, through droplets that are made when the individual coughs or sneezes, or through tiny droplets from the saliva or even the nasal cavity. 4 The human respiratory system is targeted by the coronavirus. 4 Simple actions such as individual hand cleaning and social distancing are important. However, based on World Health Organization guidelines, 5 a protective material is necessary for all medical services. With the number of cases confirmed each day, the available medical equipment cannot support the volume of patients. 6 Then, the medical product supply chain is disrupted. Thus, people die because of lack of some equipment such as ventilators and protective masks. [7] [8] [9] The existing medical system is based on private equipment from suppliers. Generally, most of the medical equipment is patented by medical firms. 10, 11 In the case of a sudden surge in demand, suppliers are unable to prepare the necessary quantity of equipment: innovation and new manufacturing strategies are needed. Moreover, transport and trade restrictions, quarantines, border controls, and production disruptions greatly affect the global supply chain of critical medical devices. Fortunately, 3D printing technology can be an effective solution to overcome this problem. 12, 13 Using this technology, the developed open-source designs of medical equipment are shared freely. [14] [15] [16] Then, other people around the world can reproduce the medical equipment on their 3D printers. [17] [18] [19] The most commonly used 3D printers are desktop 3D printers based on fused deposition modeling (FDM) technology. 20 Generally, these types of 3D printers are not fast when creating parts. But, by using all the existing 3D printers, the production capacity increases significantly. In recent weeks, the national governments around the world have called industry, scientific, and makers to develop and produce more personal protective equipment. With a 3D printer and the necessary material, everybody can be a part of the "citizen supply chain". The designs of personal protective equipment (PPE) are shared for free by the maker community. The goal of this study is to present the role of 3D printing to fight against the COVID-19 pandemic. Also, the impact of 3D printed medical equipment on the medical product supply chain is analyzed. The existing designs for medical equipment are summarized. It analyzes previous works to determine whether the designs are open source and whether practical details are provided, which include accessible design source files (eg, computer-aided design, CAD), production files (eg, Surface Tessellation Language, STL) and assembly instructions. Quarantine procedures in the particular situation of this specific pandemic have started to give stress and worry between people. A regrettable result of this is the unnecessary anxiety buying, causing those individuals who need PPE products, such as healthcare workers, within restricted supply. Then, people from the 3D printing community have developed a variety of reusable PPE products using low-cost desktop 3D printers, such as N95 masks, surgical masks, face shields, and Controlled Air Purifying Respirator (CAPR) system. In a local context, the user must employ adequate sterilization techniques for the PPE devices. The protective mask is a medical device aimed to filter bacteria and to avoid contracting a virus. These masks must be worn by the general public to protect themselves from microorganisms in the pandemic context. Since the beginning of COVID 19, the problem of supplying a protective mask has become one of the main challenges to overcome. 21 Several initiatives are taking place to remedy these deficiencies around the world. In all situations, the end customers must plainly recognize that only prototypes are obtainable at this stage and local test techniques are important to evaluate the quality of the protective mask. Swennen et al 22 have presented a procedure to produce 3D printed personalized masks using available methods and materials. The authors have shared the design of this mask for free of charge. A 3D printed reusable N95 comparable respirator was developed by Provenzano et al 23 at the George Washington University. These masks can be used with multiple filtration units, easy to produce and easy to clean. The 3D model is available upon request. Chagas et al 24 summarize several open source projects to fabricate personal protective equipment and the developed approaches in COVID-19 diagnostics. Students at Cedarville University have printed 3D masks for healthcare workers. 25 The project NANOHACK was launched by the manufacturer, Copper 3D, to produce the model N95 of protective mask using 3D printing technology. 26 A new version of the project NANOHACK 2.0 was published. It is an improved version that protects against the COVID-19 infection. The production files (STL) are provided for free of charge. Polylactic Acid (PLA) filament can be used to fabricate this mask as a flat part. Therefore, it is designed to be manually assembled into the final 3D configuration after heating to a temperature of 55 C to 60 C (Figure 1 ). Another design of the protective mask was developed by the Thingiverse user Kvatthro. 27 Moreover, this mask can be produced using a desktop 3D printer and PLA filament. It is designed with a box for HEPA filter insertion ( Figure 2 ). The Chinese company, Creality, suggested a similar style of the HEPA mask with different arrangements of the filter container, 28 that allows to insert folded fabric or filters (Figure 3 ). During the Covid19 pandemic, a face shield was designed and fabricated using 3D printing. It contains a 3D printable headpiece and an attachable transparent sheet of plastic. This device protects the user's eyes and mouth (Figure 4) . Table 1 summarizes the different PPE that has been fabricated using 3D printing technology during the COVID19 pandemic. It is noticed that the 3D printed PPE must be approved by a regulatory body. 30 Most PPE is difficult to sterilize. However, several studies were conducted to investigate the insertion of drug molecules in the PPE during fabrication to offer an antimicrobial and antiviral protection. 31-34 A non-exhaustive list of open-source medical devices for COVID-19 is given in Table 2 . The link to download the STL files is also given. The ventilation system helps patients to maintain an adequate level of oxygen (>88%) in the arterial blood. 36 Ventilation system is the last hope for the majority of patients most affected by the new coronavirus "Covid-19." Most of the national health systems do not have the needed ventilation systems that the Covid-19 pandemic is believed to require. This situation forced the doctors to make a difficult decision regarding the patients: who should be connected to these devices and who will be disconnected from them. Since the appearance of COVID-19 pandemic, local and international communities have been working together to develop an open-source ventilator. Their documentation and information are freely available on their Slack team. For example, a 3D printed ventilator system was designed and tested. The design files and STLs are freely available. Also, some makers are working on the development of pandemic ventilators. 37 Despite the many promising approaches, it is found that there is not enough information on the performance of ventilator designs to recommend them for medical use. Also, it is noticed that a basic test was carried on the designed ventilators and some ventilators were not tested at all. It is reported that the makers can use the free inactive patent that contains useful information F I G U R E 3 Creality mask to improve the open-source ventilator design. 38 These designed ventilators must be validated by a medical team. The untested ventilators can harm the lungs of the patients. [39] [40] [41] [42] For those who design open-source ventilators, there is abundant literature. For example, the essentials of mechanical ventilation can be found in "The Ventilator Book" by Owens 43 and "Principles and practice of mechanical ventilation" by Tobin. 44 Pham et al 45 as a guide to build a similar device. A minimal oxygen consumption pneumatic ventilator during a respiratory malfunction pandemic was developed by Williams et al. 50 For different lung compliances, three designs were tested. The main schematics are given, but insufficient for a complete open hardware design. It is noticed that most of the low-cost ventilators use the bag approach; however, the contemporary professional ventilators, commonly, are not produced with bags. The current effect of COVID-19 in Italy has caused local crisis due to the lack of medical equipment such as masks and Venturi valves. During this crisis, Venturi valves ( Figure 5 ), important elements of respiratory support equipment, demonstrated a hard problem to reproduce. The design of Venturi valve is protected under patent law. But particular disasters leading to life-or-death choices may explain the total usage of intellectual property. This specific need led the 3D printing community to develop a solution for producing these valves to reinforce regional supply. 51 Another method of reinforcement is the use of a single ventilator for multiple patients with a 3D printed ventilator splitter. In the above, a subset of projects that are aiming to produce protective equipment against COVID-19 using 3D printing are summarized. For a disaster situation, open-source systems allow rapid development based on the contributions of many people who work remotely. The "citizen supply chain" based on 3D printing has confirmed to be a powerful solution during COVID19. This solution can be used in many industrial sectors. In fact, many of the 3D printed PPE products need several hours to print it on conventional desktop 3D printers. During COVID 19 pandemic, organized communication between 3D printing community and local hospital supply chain is recommended. Despite the urgency of the growing COVID-19 crisis, healthcare devices must be very controlled for safety. Indeed, the 3D printed medical equipment must follow the standard safety and quality measures. Moreover, the development of antimicrobial polymers for 3D printing provides the possibility to fabricate several critical medical products. In the future, a 3D printed PPE manufacturing protocol may be developed. This protocol contains the following information: CAO model, 3D printing technology to use, material, and assembly instructions. Sometimes, it is important to develop an open-source program for disasters before the disaster strikes, because some regions of the world suffer from supply disruptions and shipping challenges. Moreover, it is necessary to develop policies and funding mechanisms for such projects. An additional challenge is keeping a suitable level of sterility of the equipment manufactured. COVID-19 infection: origin, transmission, and characteristics of human coronaviruses Coronavirus disease 2019 (COVID-19): emerging and future challenges for dental and oral medicine World Health Organization. Critical Preparedness, Readiness and Response Actions for COVID-19: Interim Guidance The epidemiology and pathogenesis of coronavirus disease (COVID-19) outbreak COVID-19) advice for the public: when and how to use masks FluSurge-A tool to estimate demand for hospital services during the next pandemic influenza Italy rush to buy life-saving ventilators as manufacturers warn of shortages Preparing for the most critically ill patients with COVID-19: the potential role of extracorporeal membrane oxygenation Estimates of the demand for mechanical ventilation in the United States during an influenza pandemic Against Intellectual Monopoly The crisis of intellectual monopoly capitalism Experimental 3D printed 4-port ventilator manifold for potential use in disaster surges 3D printing for disaster preparedness: making life-saving supplies on-site, on-demand, on-time Emergence of home manufacturing in the developed world: return on investment for opensource 3-D printers 3D printing in the laboratory: maximize time and funds with customized and open-source labware Haves and have nots must find a better way: the case for open scientific hardware Open-source hardware for medical devices 3-D printing open-source click-MUAC bands for identification of malnutrition Medical applications for 3D printing: current and projected uses RepRap -the replicating rapid prototyper Sourcing personal protective equipment during the COVID-19 pandemic Custom-made 3D-printed face masks in case of pandemic crisis situations with a lack of commercially available FFP2/3 masks Rapid Prototyping of Reusable 3D-Printed N95 Equivalent Respirators at the George Washington University Leveraging Open Hardware to Alleviate the Burden of COVID-19 on Global Health Systems Core values motivates student to print 3-D masks for healthcare workers. News Releases Makers guide Additive manufacturing can assist in the fight against COVID-19 and other pandemics and impact on the global supply chain. 3D Print Addit Manuf Food and Drug Administration (FDA). 3D printing of medical devices Antimicrobial polymers with metal nanoparticles 3D printed antibacterial prostheses Aerosol and surface stability of SARS-CoV-2 as compared with SARS-CoV-1 A novel anti-influenza copper oxide containing respiratory face mask The role of additive manufacturing and antimicrobial polymers in the COVID-19 pandemic A review of open source ventilators for COVID-19 and future pandemics Pandemic ventilator' could offer solution in potential 'worst case' coronavirus scenario Open source database and website to provide free and open access to inactive U.S. patents in the public domain Ventilator-induced lung injury Ventilator-induced lung injury Ventilator-induced lung injury: the anatomical and physiological framework Mechanical power and development of ventilator-induced lung injury The Ventilator Book Principles and Practice of Mechanical Ventilation Mechanical ventilation: state of the art Development of field portable ventilator systems for domestic and military emergency medical response A new compact and low-cost respirator concept for one way usage Prototyping of artificial respiration machine using AMBU bag compression Design and prototyping of a low-cost portable mechanical ventilator A low oxygen consumption pneumatic ventilator for emergency construction during a respiratory failure pandemic How to cite this article: Belhouideg S. Impact of 3D printed medical equipment on the management of the Covid19 pandemic The authors have no competing interests. https://orcid.org/0000-0003-2949-8618