key: cord-0931584-npi2xekh authors: Løken, Jørund; Solstad, Tom Erik Jorung; Stien, Nicolay; Andersen, Vidar; Saeterbakken, Atle Hole title: Effects of bouncing the barbell in bench press on throwing velocity and strength among handball players date: 2021-11-19 journal: PLoS One DOI: 10.1371/journal.pone.0260297 sha: 03c18554af9de306aaa00db2cb501939246ace90 doc_id: 931584 cord_uid: npi2xekh Bench press is a popular training-exercise in throw related sports such as javelin, baseball and handball. Athletes in these sports often use bouncing (i.e., letting the barbell collide with the chest) to create an increased momentum to accelerate the barbell upwards before completing the movement by throwing the barbell. Importantly, the effects of the bouncing technique in bench press have not been examined. Therefore, the aim of this study was to compare the effects of bench press throw with (BPT(bounce)) or without bounce (BPT) on throwing velocity (penalty and 3-step), 1-repetition maximum (1-RM) and average power output (20-60kg) in bench press among handball players. Sixteen male amateur handball players (7.1±1.9 years of handball experience) were randomly allocated to an eight-week supplementary power training program (2 x week(-1)) with either the BPT or BPT(bounce). Except for the bounce technique, the training programs were identical and consisted of 3 sets with 3–5 repetitions at 40–60% of 1-RM with maximal effort in free-weight barbell bench press throw. The results revealed no significant differences between the groups in any of the tests (p = 0.109–0.957). However, both groups improved penalty throw (BPT; 4.6%, p<0.001, ES = 0.57; BPT(bounce); 5.1%, p = 0.008, ES = 0.91) and 1-RM (BPT; 9.7%, p<0.001, ES = 0.49; BPT(bounce); 8.7%, p = 0.018, ES = 0.60), but only the BPT improved the 3-step throw (BPT; 2.9%, p = 0.060, ES = 0.38; BPT(bounce); 2.3%, p = 0.216, ES = 0.40). The BPT improved power output only at 20kg and 30kg loads (9.1% and 12.7%; p = 0.018–0.048, ES = 0.43–0.51) whereas BPT(bounce) demonstrated no significant differences across the loads (p = 0.252–0.806). In conclusion, the bounce technique demonstrated similar effects on throwing velocity, muscle strength and muscle power output as conventional bench press throw without the bounce technique. Coaches and researchers have developed resistance training programs with the intent to maximize the transfer of training-effects to high-velocity movements (i.e., sprinting, kicking, handball training. Test variables pre-and post-intervention consisted of throwing velocity (7m penalty and 3-step), bench press 1-RM, and average power output profile (20-60kg) in bench press. Subjects were recruited from two different handball teams and randomized into the two training groups BPT and BPT bounce . Of note, each team was randomized into the two groups meaning that each team had equal number of participants in each group. This was done to counteract the possible bias due to the training routines and training/testing equipment. Initially, 19 amateur handball players were recruited; however, two players were injured (not related to the intervention), and one did not attend the post-test. Sixteen subjects completed at least 12 training sessions and were included in the data analysis. The average training attendance was 16 (± 2.0 sessions) and 16 (± 2.7 sessions) for the BPT group and BPT bounce group. Details of the subjects are included in Table 1 . All subjects were informed with written and verbal instructions regarding the implications and potential side effects of participating in this experiment. The study was conducted from October to December 2020, and the present procedures were performed in accordance with the Declaration of Helsinki and approved by the Norwegian Centre for Research Data (ref. 288211). Four to five days before the pre-test, a familiarization with BPT and BPT bounce technique was performed. The familiarization session aimed to familiarize the subjects with both the BPT and BPT bounce technique by completing several attempts with each technique on loads between 30-60% of self-reported 1-RM (e.g., 20-70 kg). Of note, the handball players were experienced with resistance training and were tested in bench press 1-RM frequently (e.g., 3-5 times) each year. One-to-two repetitions for each load were conducted with no more than five loads for each technique. In the BPT technique, the subjects were instructed to lower the barbell and lightly touch (no bounce allowed) the chest (sternum position) and immediately press upwards with maximal voluntary intent until projecting the barbell (i.e., throw the barbell). Similar instructions were given for the BPT bounce technique, except the instruction to bounce the barbell off the chest. For both techniques, subjects were instructed with the following statement: "the goal is to generate as high velocity during the ascending phase as possible, with a fast but controlled lowering velocity". In the BPT, trials were omitted if the barbell bounced or if the descending phase was terminated before touching the sternum lightly. For the BPT bounce , trials were rejected if the bar did not clearly bounce off the chest. In both techniques, trials were rejected if the hip lifted from the bench or if any hesitation occurred in the transition from the descending to the ascending phase. Before each test session, the subjects were instructed to complete a 5-minute general warmup on a treadmill or stationary bike. The warm-up continued in the lab with dynamic stretches for the pectoralis, anterior deltoid, and triceps brachii, followed by 10 repetitions in the bench press with 20kg, 4 repetitions at 50% of self-reported 1-RM and 2 repetitions with 75% of selfreported 1-RM. Preferred grip width and back position on the bench were measured and controlled before each lift. All testing and training were conducted in Smith machines. The pre-and post-tests consisted of two testing days. On the first day, the load-power test and 1-RM, test was conducted. In the load-power test, the subjects performed 1-3 attempts separated with 2-3 minutes rest at loads increasing from 20-60kg with both BPT techniques performed in a randomized order. To assess the power output, a linear encoder (Ergotest Innovation, Stathelle, Norway) was attached to the barbell. The linear encoder measured barbell vertical displacement and time with a resolution of 0.019 mm and a sampling rate of 200 Hz. Using the commercial software Musclelab v.10 (Ergotest Innovation, Stathelle, Norway), the average power (e.g., from the lowest to the highest barbell position) was calculated from the ascending phase of the BPT for each load. The attempts with the highest average power were selected for the analysis. The second day of testing was conducted 5-7 days after the first test and consisted of measuring maximal throwing velocity in a penalty throw (7m) and a 3-step handball throw. After a general warm-up, both tests followed a procedure inspired by Saeterbakken et al. [5] . Groups of three subjects tested in rotation with a 60-second rest between attempts, performing 5-10 maximal throws. The test was terminated when the velocity decreased after the 5 th attempt. The penalty shot was performed behind the 7m line and followed regular penalty rules, with the front foot on the ground during the throw. The 3-step throw was performed behind the 9m dotted line, and subjects were allowed a 3-step run-up. Subjects were instructed to throw the ball (mass 480 g, circumference 58 cm) as fast and straightforward as possible [5] . Maximal ball velocity was measured with a Stalker Radar gun (The Stalker ATS II; Radar Sales, Plymouth, MN, USA) with an accuracy of ± 3%. The radar was located 1 meter behind the participant at ball height during the throw [23] . The average of the three best throws was used in further analysis [5] . The test-retest coefficient of variation (CV) for the three best throwing velocities used in the analyses were 1.49 and 1.23 for the penalty and 3-step throw. Training programs. Due to national traveling restrictions following the Covid-19 pandemic, only six subjects (three subjects in each group) from one of the recruited handball teams were supervised every session. The other ten subjects were supervised in the first two sessions and one session midway through the intervention. The unsupervised subjects were instructed to train in pairs and to encourage each other to perform each lift with maximal voluntary effort and with a proper bounce (e.g., a significant and visible compression of the chest). A researcher had weekly contact with them, and all subjects delivered a training log for each week. Both groups received the same power training program and were asked to continue their regular team handball training. In addition, the subjects were encouraged to continue their usual resistance training routines, but refrain from additional resistance training involving the chest, shoulder, and triceps muscles. Each training session was initiated with a warm-up and included: dynamic stretches for the pectoralis major, anterior deltoid, and triceps brachii muscle, 10 repetitions with an unloaded bar (20kg), 6 repetitions with 50% of that session's training load and 4 repetitions with 70% of that session's training load. The training program ( Table 2 ) was based on previous recommendations for power training [12, 24] and a recent bench throw study [25] . The 1-RM result from the pre-test was used to calculate training load in weeks 1-4, whereas a new 1-RM test (identical procedures as described previously) was conducted after week 4 of the intervention to adjust the loading. During the intervention, the subjects reported their weekly numbers of team handball sessions and resistance training sessions targeting the upper body. The post-test was performed 6-8 days after the intervention to maximize adaptations to the training intervention while minimizing fatigue. Statistics. All baseline variables were tested for normality (Shapiro Wilk) and visually inspected. To examine potential differences in team handball training, resistance training or change in relative resistance in the loads for the power test, independent T-tests were used. Split-plot ANOVA (within-subject factor: time (pre and post); between-subject factor: BPTtechnique (BPT and BPT bounce )) was used to determine the effects of the intervention on average power output, maximal strength, 7m-and 3-step throwing velocity. Magnitude of the effects was determined using Cohen's d. An effect size of < 0.2 was considered trivial, 0.2-0.5 small, 0.5-0.8 medium and > 0.8 large [26] . The significance level was set to � 0.05 and all data are reported as mean ± standard deviation (SD) if nothing else is stated. There was no significant difference between the two groups in weekly team handball (p = 0.387) or resistance training sessions (p = 0.109) during the intervention. The BPT reported 2.6 ± 1.7 and 3.3 ± 1.0 team handball and resistance training sessions per week whereas the BPT bounce reported 1.9 ± 1.2 and 2.6 ± 0.5 team handball and resistance training sessions per week. Furthermore, no significant differences in subject anthropometrics (p � 0.158), maximal ball velocity (p � 0.246) and 1-RM (p = 0.629) were observed at pre-test. No significant interaction (F = 0.08-2.407, p = 0.539-0.929) or significant main effect for group (F = 1.058-1.1225, p = 0.290-0.324) was observed for the 7m and 3-step throwing velocity, but a main effect for time (F = 50.120-53.185, p < 0.001-0.005) was observed (Figs 1 and 2, and S1 Table) When measuring power output during bench press throw with bonce, no significant interaction Table 3 . For the bench press throw without bounce, no significant interaction (F = 0.003-2.989, p = 0.109-0.957) or significant main effect for group (F = 0.239-0.407, p = 0.217-0.634) was observed across the loads without bouncing the barbell. A significant main effect for time was observed for 20kg, 50kg and 60kg (F = 7.953-18.512, p = 0.002-0.015), but not 30kg and 40kg (F = 4.224-4.435, p = 0.057-0.062). All post hoc tests and details are presented in Table 3 . The bench press loads 20kg, 30kg, 40kg, 50kg and 60kg represented in the pre-test 31-78% of the 1-RM load for the BPT bounce group and 31-87% for the BPT group. At post-test, the loads represented 28-76% of the 1-RM load for the BPT bounce group and 28-85% for the BPT group. No significant differences of the loads (e.g., percent of 1-RM) were observed between the groups at pre-test (p = 0.334-0.940) or post-test (p = 0.449-0.993). The purpose of this study was to investigate the training effects of bench press throw with or without the bounce technique. The main findings were that eight weeks of power training with BPT or BPT bounce had similar effects on throwing velocity, maximal strength, and power output in amateur handball players. In contrast to the hypotheses, similar effect of the two techniques were observed. This may be due to similar stimuli for adaptation as both techniques were trained with maximum voluntary effort and the intent to develop force as fast as possible throughout the entire ascending movement of the barbell. Furthermore, the resistance training protocol had similar training volume and similarities in techniques (e.g., targeting same muscle groups), and intensities (e.g., % of 1-RM). This may explain the similar results. In addition, the rate of muscular tension development and motor unit activation may have been relatively similar independent of the techniques [21, 27] as both groups performed BPT. Therefore, the difference between the techniques in the present study might have been insignificant to evoke different responses. Still, the possibility that some players performed a greater bounce than other cannot be rejected. A small bounce would make the training intervention close to identical and could potentially explain the findings. Importantly, the test leader attended as many training sessions as possible to promote maximal effort and a proper visual bounce. Furthermore, both groups trained with the same volume and load (sets x repetitions x load) suggesting that the workload between the groups was the same. Previous studies have compared different workloads such as heavy resistance training (>70% of 1-RM) with ballistic power training (< 30% of 1-RM) and reported similar improvement in sprint, jump height, and throwing performance [28, 29] . Still, to exploit the elastic energy and stretch-shortening cycle from the descending phase to the ascending phase with maximal acceleration of the loads, a considerable requirement of muscle power and force are required [30, 31] , especially for the BPT bounce group. Based on the BPTbounce groups'relative 1-RM strength level (1-RM/body weight = 0.98), it is plausible that their strength level was too low to exploit the bounce effect maximally in BPT. For example, higher drop jump heights (>60cm) have demonstrated lower reactive strength index than lower heights [32] . Reactive strength index is calculated by dividing the jump height by ground contact time and has proven reliable and a useful tool to measure the ability to quickly change from eccentric to concentric muscle action [33, 34] . In the aforementioned study [32] , the ground contact time was longer using higher drop jump heights (>60cm) which means that the ability to rapidly absorb and then transmit the energy to a propulsive contraction decreased with increasing drop jump heights. Still, the relative lower limb strength was not included in the study [32] , which could support our speculation that the subjects in the present study were not strong enough to exploit the bounce effect. Furthermore, non-professional volleyball players have demonstrated greater effects in different jump types during six weeks of countermovement jump training than drop jump training (17 vs. 7%) [35] . These findings could implicate that the subjects in the present study may not have been trained specifically for eccentric strength, which can result in reduced ability to absorb and transmit the energy to a concentric movement [36] . Importantly, maximal effort and the intention to develop force rapidly have previously been accounted as a critical stimulus for improving high-velocity performance in resistance training [37, 38] . For example, Sakamoto and colleagues [10] showed that bench throw training (30-50% RM) significantly increased throwing distance and maximum strength compared to no significant increase with the traditional bench press technique (e.g., no barbell throw). The intervention may have provided a too low stimuli due to a combination of low loads, reduction in handball matches, duration of the intervention, or total training volume to detect differences between the groups in throwing velocity. The subjects of this study completed an average of 16 intervention sessions (i.e., six weekly sets) over eight weeks and the resistance training program was designed as a supplement to the subjects'team handball training. However, no physical contact or matches were allowed during the intervention due to the national and local COVID-19 regulation which could potentially have influenced the findings with reduced handball session intensity and throwing training (e.g., low loads training with maximal velocity). It could be speculated that a longer training period may have affected the muscular action more (i.e., neurological and morphological) and improved motor coordination, leading to greater effect of the bounce technique. However, this is speculative and cannot be answered by the present study's recordings. Nevertheless, the consistent performance of the sport-specific skill in conjunction with resistance training might be pivotal to transfer effects of from the resistance training to throwing velocity [8, 14, 15 ]. An increased training volume and an extended intervention period could have allowed potential differences between the groups [39] . Still, the increase in maximal strength for the two groups (8.7% and 10.2%) was similar to the 10% increase reported by Sakamoto et al. [10] who completed a 12 week intervention with two sessions per week. Both groups improved the 7m penalty throw, whereas only the BPT improved the 3-step throwing velocity. This may be the result of the penalty throw being better at isolating improvements to the upper body musculature, as the 3-step involves more complex motor skills. Nevertheless, the effects on 7m throwing velocity in this study are similar to the 2% improvement reported by McEvoy and Newton [11] who incorporated a similar intervention concurrently with regular sport practice. The present study population may not be optimal for such a specific investigation. Amateur athletes may respond to a broad range of training stimuli and is typically less sensitive to the specifics of training [7, 15, 28] . For athletes with only a few years of resistance-or handball experience, additional throwing and general resistance training results in positive outcomes [7] . The speculation is supported by two reviews on throwing velocity who both stated that there is no definitive answer to which type of training which produces the greatest increase in throwing velocity [4, 7] . Regarding the bench press 1-RM results, it was hypothesized that the BPT would increase 1-RM to a greater degree than BPT bounce . This hypothesis was based on the principle of specificity and that the 1-RM test was carried out with a technique more similar (no bounce allowed) to the training of the BPT group. Contrary to the hypothesis, results showed similar improvements between the groups. Similar training volume, intensity, and workloads, in addition to low relative bench press strength (0.94 and 0.98 at baseline), are most likely the explanation of the findings. Different findings have been reported in a study comparing heavy resistance training and ballistic power training [28, 29] , but not in all [40] . Importantly, power training with maximal effort can improve 1-RM strength [2] . Despite no significant differences between the groups in power output across loads, the BPT improved power output only at the 20kg and 30kg loads (9.1% and 12.7%, respectively) whereas BPT bounce demonstrated no significant differences across the loads. These loads were lower loads than the one being used in the intervention (Table 2 ) and thereby not according to the load/movement velocity specific response typically reported elsewhere [2, 12, 38] . Typically, it is considered easier to increase strength than velocity, especially when initial strength is low [16, 41] . This may explain the improvement in 1-RM strength even though no significant differences were observed between the groups. Furthermore, Cuevas-Aburto et al. [40] demonstrated similar increase in bench press 1-RM comparing a strength-oriented training program to a ballistic training program. Importantly, an increase in subjects' force-generating capacity increases their potential to become faster at any given force or resistance [42] , potentially explaining the increased throwing velocity. The present study has several limitations which the reader needs to be mindful of. First, the study suffered from a relatively small number of subjects and type 2 error cannot be ruled out when comparing the techniques. Using the post-test results from the 7m throwing test to calculate the minimal sample size to detect significant difference (α level of 0.05, and β level of 80%), 12 subjects in each group was required. Additionally, and based on the post-test results, the statistical power in the present study was 44%. Also, the difference between the techniques might be greater with heavier loads (>60% 1RM). However, we designed a power training program using loads between 40-60% of 1-RM. Still, whether greater resistance training experience (e.g., strong athletes) or heavier loads might be more beneficial for one of the bench press throw techniques is beyond the scope of the present study, but should be examined in further studies. If introducing the bounce technique with a heavier relative load, it should be considered against the possibility of increased injury risk, especially if the subjects are inexperienced. Also, due to low access to appropriate subjects (handball players) during the COVID-19 pandemic, the study could not include a control group. Researchers may have these considerations in mind when interpreting the results or planning to investigate the effects of bounce in the future. In conclusion, the results demonstrated similar effects of the BPT and BPT bounce techniques on maximal throwing velocity, maximal strength, and power output in amateur handball players. For athletes where the strength component is less developed, the present results indicated that the bounce technique is not of significant importance. Importantly, the findings of this study must be interpreted in the context of both techniques being performed as explosively as possible. It is important to note that the findings are limited to short-term power training among amateur athletes. In that case, more strength-oriented training could possibly render similar improvements to throwing velocity while increasing maximal strength to a larger degree, which is considered a critical long-term adaptation for athletes involved in explosive endeavors. However, once adequate strength has been developed, the use of more explosive and specific training variations is considered increasingly important [12, 15] . Yet, this possibility requires further study. Supporting information S1 The Importance of Muscular Strength in Athletic Performance Challenges in understanding the influence of maximal power training on improving athletic performance Biomechanical factors critical for performance in the men's javelin throw Effect of different training programs on the velocity of overarm training: A brief review Effect of core stability training on throwing velocity in female handball players Resistance Training and Handball Players' Isokinetic, Isometric and Maximal Strength, Muscle Power and Throwing Ball Velocity: A Systematic Review and Meta-Analysis Effects of Various Resistance Training Methods on Overhand Throwing Power Athletes: A Brief Review Velocity specificity, combination training and sport specific tasks Kinematics, kinetics, and muscle activation during explosive upper body movements The effectiveness of bench press training with or without throws on strength and shot put distance of competitive university athletes | SpringerLink Baseball throwing speed and base running speed: The effects of ballistic resistance training Developing Maximal Neuromuscular Power: part 2-training considerations for improving maximal power production Developing explosive power: a comparison of technique and training Velocity specificity of resistance training Transfer of strength and power training to sports performance Training for muscular power The role of elastic energy in activities with high force and power requirements: a brief review A Biomechanical Analysis of the Effects of Bouncing the Barbell in the Conventional Deadlift A comparison of muscle activity in concentric and counter movement maximum bench press Why is countermovement jump height greater than squat jump height? Utilization of stored elastic energy in leg extensor muscles by men and women A mechanism for increased contractile strength of human pennate muscle in response to strength training: changes in muscle architecture Effects of Fatigue on Throwing Performance in Experienced Team Handball Players Methods to increase the effectiveness of maximal power training for the upper body Effects of Load on Peak Power Output Fatigue During the Bench Throw Statistical power analysis for the behavioral sciences Storage of elastic energy in skeletal muscles in man Adaptations in athletic performance after ballistic power versus strength training Effects of Strength vs. Ballistic-Power Training on Throwing Performance Prestretch potentiation of human skeletal muscle during ballistic movement Drop jumping as a training method for jumping ability Effects of Drop Height on Drop Jump Performance Reliability of the reactive strength index and time to stabilization during depth jumps The use of contact time and the reactive strength index to optimize fast stretch-shortening cycle training Countermovement Jump Training Is More Effective Than Drop Jump Training in Enhancing Jump Height in Non-professional Female Volleyball Players The effects of eccentric versus concentric resistance training on muscle strength and mass in healthy adults: a systematic review with meta-analysis Intended rather than actual movement velocity determines velocity-specific training response Maximal intended velocity training induces greater gains in bench press performance than deliberately slower half-velocity training Neuromuscular and hormonal adaptations in athletes to strength training in two years Changes in bench press performance and throwing velocity after strength-oriented and ballistic resistance training programs The role of maximal strength and load on initial power production Effect of specific resistance training on overarm throwing performance We thank the participants for their enthusiastic participation in this project. There are no conflict of interest.