key: cord-0930837-80dfqjql
authors: Kampf, Günter
title: Potential role of inanimate surfaces for the spread of coronaviruses and their inactivation with disinfectant agents
date: 2020-06-30
journal: Infection Prevention in Practice
DOI: 10.1016/j.infpip.2020.100044
sha: b31ac58e913e3456eaca63b33272d58ac3818a48
doc_id: 930837
cord_uid: 80dfqjql

Summary The novel human coronavirus SARS-CoV-2 has become a global health concern causing severe respiratory tract infections in humans. Human-to-human transmissions have been described, probably via droplets but possibly also via contaminated hands or surfaces. In a recent review on the persistence of human and veterinary coronaviruses on inanimate surfaces it was shown that human coronaviruses such as Severe Acute Respiratory Syndrome (SARS) coronavirus, Middle East Respiratory Syndrome (MERS) coronavirus or endemic human coronaviruses (HCoV) can persist on inanimate surfaces like metal, glass or plastic for up to 9 days. Some disinfectant agents effectively reduce coronavirus infectivity within 1 minute such 62%–71% ethanol, 0.5% hydrogen peroxide or 0.1% sodium hypochlorite. Other compounds such as 0.05%–0.2% benzalkonium chloride or 0.02% chlorhexidine digluconate are less effective. An effective surface disinfection may help to ensure an early containment and prevention of further viral spread.

The novel coronavirus SARS-CoV-2 has recently emerged from China with a total of 14,557 laboratory-confirmed cases (as of February 2, 2020) [1] . Person-to-person transmission has been described both in hospital and family settings [2] . Some examples were described by the WHO. In Japan, a tour guide was infected who was part of the same cluster of Japanese cases who had contact with tourists from Wuhan. In Germany, a case was described that was part of the cluster in Bavaria. And in Thailand, a taxi driver was confirmed as infected who had no travel history to China. In addition, in France a healthcare worker was diagnosed with SARS-CoV-2 acute respiratory disease who treated two patients later identified as probable cases [3] . It is therefore of utmost importance to prevent any further spread in the public and healthcare settings.

It has been postulated that coronaviruses can be transmitted from contaminated dry surfaces including selfinoculation of mucous membranes of the nose, eyes or mouth [4, 5] . One ml of sputum has been described to contain approximately 10 8 viral copies [6] . In a recent review all E-mail address: guenter.kampf@uni-greifswald.de. available data on the persistence of coronaviruses on inanimate surfaces were summarized [7] . Most data were described with the endemic human coronavirus (HCoV) strain 229E which can remain infectious for 2 h -9 d on different types of materials. A higher temperature such as 30 C or 40 C is associated with a shorter persistence of highly pathogenic Middle East Respiratory Syndrome (MERS) coronavirus. Few comparative data obtained with SARS-CoV indicate that persistence was longer with higher inocula. In addition it was shown at room temperature that HCoV-229E persists better at 50% relative humidity compared to 30% [8] .

Ethanol (78%e95%), iso-propanol (70%e100%), the combination of 45% iso-propanol with 30% n-propanol, glutardialdehyde (0.5e2.5%), formaldehyde (0.7%e1%) and povidone iodine (0.23%e7.5%) readily inactivated coronavirus infectivity by approximately 4 log 10 or more. Sodium hypochlorite required a concentration of at least 0.21% to be effective. Hydrogen peroxide was effective with a concentration of 0.5% and an exposure time of 1 min. Data obtained with benzalkonium chloride at reasonable contact times were conflicting. Within 10 min a concentration of 0.2% revealed no efficacy against coronavirus whereas a concentration of 0.05% was more effective. In contrast, 0.02% chlorhexidine digluconate was basically ineffective [7] .

62%e71% ethanol reduced coronavirus infectivity within 1 min exposure time by 2.0e4.0 log 10 .0.1%e0.5% sodium hypochlorite and 2% glutardialdehyde were also quite effective with a reduction of viral infectivity > 3.0 log 10 in 1 min. 0.04% benzalkonium chloride, 0.06% sodium hypochlorite and 0.55% ortho-phthalaldehyde, however, were less effective [7] .

Contamination of frequent touch surfaces in healthcare settings are a potential source of viral transmission. Data on the transmissibility of coronaviruses from contaminated surfaces to hands were not found. However, it could be shown with influenza A virus that a 5 s contact is sufficient to transfer 31.6% of the viral load to the hands [9] . The transfer efficiency was lower with parainfluenza-virus 3 (1.5%) [10] . Although the viral load of coronaviruses on inanimate surfaces is not known during an outbreak situation it seems plausible to reduce the viral load on surfaces by disinfection, especially on frequent touch surfaces in the immediate patient surrounding where the highest viral load can be expected.

The WHO recommends "to ensure that environmental cleaning and disinfection procedures are followed consistently and correctly. Thoroughly cleaning environmental surfaces with water and detergent and applying commonly used hospital-level disinfectants (such as sodium hypochlorite) are effective and sufficient procedures." [11] The typical use of bleach is at a dilution of 1:100 of 5% sodium hypochlorite resulting in a final concentration of 0.05% [12] . The recently published data with coronaviruses suggest that a concentration of 0.1% is effective in 1 min [7] . That is why it seems appropriate to recommend a dilution 1:50 of standard bleach in the coronavirus setting. For the disinfection of small surfaces ethanol (62%e71%; carrier tests) revealed a similar efficacy against coronavirus [7] . Ethanol at 70% ethanol is also recommended by the WHO for disinfecting small surfaces [12] .

On inanimate surface human coronaviruses can remain infectious for up to 9 d. A surface disinfection with 0.1% sodium hypochlorite, 0.5% hydrogen peroxide or 62%e71% ethanol can be regarded as effective against coronaviruses within 1 min. A similar effect can be expected against the SARS-CoV-2.

None.

WHO. Novel Coronavirus

A familial cluster of pneumonia associated with the 2019 novel coronavirus indicating person-to-person transmission: a study of a family cluster

Novel coronavirus (2019-nCoV)

Transmission of SARS and MERS coronaviruses and influenza virus in healthcare settings: the possible role of dry surface contamination

Severe acute respiratory syndrome coronavirus on hospital surfaces

Transmission of 2019-nCoV Infection from an Asymptomatic Contact in Germany

Persistence of coronaviruses on inanimate surfaces and its inactivation with biocidal agents

Survival characteristics of airborne human coronavirus 229E

Survival of influenza viruses an environmental surfaces

Potential role of hands in the spread of respiratory viral infections: studies with human parainfluenza virus 3 and rhinovirus 14

Infection prevention and control during health care when novel coronavirus (nCoV) infection is suspected. WHO; 2020. Interim guidance

Use of disinfectants: alcohol and bleach. Infection prevention and control of epidemic-and pandemic-prone acute respiratory infections in health care