key: cord-0905441-neisxn2k
authors: Di Giacomo, Gabriele; Romano, Pietro
title: Advanced fractionation process for wine-based products diversification
date: 2021-01-18
journal: J Food Sci Technol
DOI: 10.1007/s13197-020-04957-7
sha: 32d5a974890b6ebd7a803ea79e7e3921ed6676ba
doc_id: 905441
cord_uid: neisxn2k

Wine fractionation is an old practice widely applied for many reasons, including the production of food-grade alcohol and spirits, alcohol-reduced wines and beverages, functional products, and aromas. The purpose is the need to satisfy different lifestyles and legal constraints. The raw material, usually called industrial wine, includes wine overproduction and wine not used as such: mainly table wine, the fermented juice of unsold table grapes, and quality wine. Three technologies are currently in use: Vacuum distillation, Reverse osmosis in dialyzing mode, and the Spinning cone column. The process developed in this work results from the integration of a multistage reverse osmosis section operating in dialyzing mode, with the Atmospheric distillation of the permeate stream; the two most applied technologies for fractionating liquid mixtures. This process allows the fractionation of the wine into four products (the vegetation water, the azeotropic Ethanol, a concentrated aqueous solution of the solid extract, and a concentrated alcoholic solution of volatile aroma compounds) while preserving sensorial, nutritional and functional properties of the individual compounds. Then, the proper recombination of these products gives rise to a wide variety of wine-based products to meet the specifications of each market segment. The process is environmentally friendly and, in comparison with the competitors, is less energy-intensive, other than resilient and flexible regarding the production potentiality.

Abstract Wine fractionation is an old practice widely applied for many reasons, including the production of foodgrade alcohol and spirits, alcohol-reduced wines and beverages, functional products, and aromas. The purpose is the need to satisfy different lifestyles and legal constraints. The raw material, usually called industrial wine, includes wine overproduction and wine not used as such: mainly table wine, the fermented juice of unsold table grapes, and quality wine. Three technologies are currently in use: Vacuum distillation, Reverse osmosis in dialyzing mode, and the Spinning cone column. The process developed in this work results from the integration of a multistage reverse osmosis section operating in dialyzing mode, with the Atmospheric distillation of the permeate stream; the two most applied technologies for fractionating liquid mixtures. This process allows the fractionation of the wine into four products (the vegetation water, the azeotropic Ethanol, a concentrated aqueous solution of the solid extract, and a concentrated alcoholic solution of volatile aroma compounds) while preserving sensorial, nutritional and functional properties of the individual compounds. Then, the proper recombination of these products gives rise to a wide variety of wine-based products to meet the specifications of each market segment. The process is environmentally friendly and, in comparison with the competitors, is less energy-intensive, other than resilient and flexible regarding the production potentiality.

Keywords Industrial wine Á Dealcoholized wine Á Solid extract Á Fractionation process There is a general perception, widely shared all around the world, that consumption of traditional wine should decrease in favour of partially dealcoholized wine or wine already made with lower alcohol strength (Heux et al. 2006; Ruf 2011; Mueller 2011; Wine Intelligence Report 2016) . The global non-alcoholic wine market is estimated to grow at an impressive CAGR of over 7% during the forecast period (2019-2027) and is projected to reach a value pool of over US $ 10 billion (Report FACT4532MR 2020). In this contest, it makes sense to attempt to improve the technology to meet the evolution of the wine sector, considering that wine is a source of a variety (thousands) of useful components: vitamins, proteins, colourants, molecules with a delicious taste and or smell, minerals, and functional chemical compounds capable of preventing widespread and grave diseases. Not by chance in the old practice wine was used as a therapeutic agent, for wound dressing, as nutritional dietary beverage, antipyretic, purgative and diuretic (Stockley et al. 2012) . Since the French Paradox (Renaud and De Longeril 1992) , many systematic studies have been undertaken to identify the beneficial properties of the red wine, of its solid extract, and single molecules of this fraction, regarding bioavailability, efficacy and recommended daily intake amount. For example, the solid extract is characterized by antioxidant properties that positively influence in delaying/preventing the onset of cancer and cardiovascular diseases. The main responsible for these properties are the phenolic fraction, trans-Resveratrol, and quercetin. It is worth to emphasize that bioavailability and health effects of wine-derived solid extract do not require the presence of Ethanol, as aqueous and vegetable matrices are as active as wine in facilitating adsorption (Pellegrini et al. 2000; Goldberg et al. 2003; Roy and Lundy 2005; Baur and Pearson 2006; Paixao et al. 2007; Gorelik et al. 2008) .

Consequently, the recommended daily intake of beneficial compounds is assumable while avoiding some drawbacks associated with the excessive consumption of Ethanol which is responsible for some alcohol-related diseases, other than for ethical, social and religious contraindications in many countries. Other research works focused into quantify the physical and the sensorial properties of the aroma compounds of the wine; still, others finalized to understand the stability of the wine and its components to the heat and oxidizing agents (Styger et al. 2011) . Therefore, it is reasonable to use an increasing portion of the global wine production as raw material (IW) for making a variety of wine derived products for the food and beverage as well as for para-pharmaceutical industry (Alvarez Gaona et al. 2019 ).

An interesting strategy for wine fractionation assumes that wine is a liquid solution of four pseudo-compounds (water, Ethanol, solid extract, and volatile aromas) which can be separated to the desired degree of purity as final products or as bases for formulating tailored products required, from time to time, by local and niche markets existing all around the world. This work aims to describe and to discuss an advanced fractionation process for the production of these components under optimal operating conditions, avoiding any damage to their sensorial, nutritional and, functional properties.

The wine used in this work was a young ''Montepulciano d'Abruzzo'' taken from Cantina Citra (Abruzzo, Italy) as the one used in previous work (Di Giacomo and Taglieri 2012) . However, it was re-characterized to account for seasonal variations. To this purpose the value of the dry solid extract (g/l) was determined by measuring the density value of the dealcoholized wine (q e ), obtained by slow evaporation and re-condensation, using the Tabarié formula:

q v is the density of the wine, while q d is the density of the alcoholic distillate, both measured at 20°C. The value of the total solid extract and that of the alcoholic degree of the wine (abv) were obtained using the Reichard tables as a function of q e . Actually, for determining the alcoholic degree, the wine was previously alkalinized with about 10% of calcium hydrate. The experimental measurement of the densities was made, in triplicate, using an Anton Paar densimeter (DMA 4100 M), with an estimated error of 0.01%. The alcoholic strength and the solid extract were practically the same as before (13.5 ± 0.03% abv and 2.3 ± 0.02% w/w, respectively). The volatile aroma compounds (VAC) were detected and quantified using a Carlo Erba 8000 top series gas chromatograph (CE Instruments, Milan, Italy), equipped with a flame ionization detector, a split-splitless injector, and a Supel-cowax 10 column (60 m 9 0.32 mm). The temperature of both the injector and detector was 250°C, the carrier gas was helium with a flow rate of 0.8 ml/min, and the split ratio was 1:30. Using a reference mixture, a total amount of about 500 ppm of VAC resulted; the maximum error was 5% on 4 replicates measurements.

The reverse osmosis (RO) operates in dialyzing mode using the vegetation water (RVW) coming from the bottom of the distillation column. The RO experiments were done by using a single-stage pilot plant (NIRO-SOAVI) equipped with a commercial spiral wound module (GEA TFC 3838).

The experimental results, regarding optimal operating conditions, plant configuration, operational procedures, and characteristics of raw materials and products have been already described in detail (Di Giacomo and Taglieri 2012) . In particular, it results that RO applied at room temperature with a concentration factor (w/w)\15, wholly rejects the solid extract, as verified by measuring the density (r e ) of the dealcoholized retentate. At the same time, Ethanol, water, and VAC are insensitive to the membrane barrier.

Technologies for wine fractionation There are many separation technologies for liquid mixtures, and each of them can be applied, in principle, for fractionating IW. However, the selected technology/technologies should meet some requirements to be efficacious in separating the desired products, economically feasible, and sustainable for energy consumption and environmental impact, while preserving nutritional, sensory and functional properties of each chemical compound. Traditionally, wine fractionation was made by evaporation, or by batch and continuous distillation under atmospheric pressure considering the significant difference between the boiling points of the compounds or groups of compounds to be separated. Atmospheric evaporation and distillation are widely applied for making food-grade alcohol or other distillates. However, they are not applicable when the desired product is the aqueous solution of the solid extract, containing a variety of heat-sensitive compounds, in order to avoid the phenomenon of the cooked wine.

For these reasons when, before the end of the 19 th century, a German company started developing a process for producing dealcoholized wine, used vacuum distillation, capable of working with safe temperature, close to ambient one. The sensorial properties of the product were enhanced some year later by developing a technique for recovering the volatile aroma compounds, lost during vacuum distillation (USA Patent 1913) . Before the end of the 20th century, new technologies become available at industrial scale for fractionating liquid mixtures and subsequently legalized for application in the food and beverage industry, including the oenology practice. Among these, Reverse Osmosis (RO) and Supercritical Carbon Dioxide Extraction (SCE) appear useful for fractionating industrial wine (Ruiz-Rodriguex et al. 2012; Schmidtke et al. 2012; Diban et al. 2013; El Rayess and Mietton-Peuchot 2016) . Both can operate at a temperature lower than 313 K. Furthermore, a wine fractionation dedicated technology, the so-called Spinning Cone Column (SCC) was developed in the USA and further enhanced and applied at industrial scale in Australia (Pichering 2000; Belisario-Sanchez et al. 2009 ).

RO is in use at industrial scale for producing alcoholicfree wine (alcoholic strength \ 0.2% abv) and dealcoholized wine (alcoholic strength \ 0.5% abv). However, as discussed in the next paragraph, special precautions must be taken for making uncontaminated and high-quality products. The authors also evaluated the technical feasibility of producing dealcoholized wine by the SCE, using food-grade carbon dioxide as a solvent. The experimental apparatus used for this purpose was a continuous, automatically controlled, pilot plant described in detail in previous work (Del Re and Di Giacomo 1998) . Synthetically, it consists of a three meters toll packed-bed insulated column corresponding to about three theoretical stages (unpublished degree thesis on Chemical Engineering of Pietro Romano 2020). Using a constant flow rate stream of fresh solvent, without recirculation, it resulted that an alcohol rich extract continuously lives from the top of the column. At the same time, the dealcoholized raffinate (\ 0.2% abv) lives from the bottom. Optimal values of pressure and temperature, which maximize both loading and selectivity are 10 MPa and 313 K respectively while the solvent to feed ratio was equal to 15, w/w. SCE is not in use at industrial-scale for the fractionation of aqueous solutions of Ethanol and other minor solutes, despite the intense research activity documented in the literature (Martinez de la Ossa et al. 1990; Di Giacomo et al. 1993; Budich and Brunner 2003; Macedo et al. 2008; Ruiz-Rodriguez et al. 2012; Schmidtke et al. 2012) . This because of the problems arising when recirculating Carbon Dioxide. At the moment, fractionation of industrial wine is mainly performed by RO, vacuum distillation, and by SCC.

The ROAD process Figure 1 shows schematically the ROAD process, i.e., a new method for fractionating industrial wine, obtained by connecting a countercurrent-multistage reverse osmosis section operating in dialyzing mode (RO) with an atmospheric distillation section (AD). In this way, it is possible to reduce the flow rate of washing water and, consequently, to reduce the feed stream of the distillation column. Independently by the number of stages, RO divides IW into two liquid streams: the final retentate (DSSE), and the final permeate (P). The first is made up of the whole amount of the total solid extract, containing all the thermosensitive compounds, dissolved in a concentrated aqueous solution. P is made up mostly of water and Ethanol, plus a tiny amount (ppm) of VAC and is further treated by distillation for separating these three components. Since P does not contain any thermosensitive compound, it is fractionated by the AD, instead of the more energy-intensive vacuum distillation, just avoiding the combined effect of both oxygen and temperature for preserving the integrity of the VAC. Furthermore, heat recovery from the vegetation water (VW) obtained at the bottom of the AD by worming P, enhances the energy efficiency of the whole process.

An alternative configuration of this process is the one shown in Fig. 2 . The first is a continuous process with a counter-current multistage RO section while the second is a semi-batch process with a single-stage RO section. Both give the same products and operate under the same temperature, and pressure conditions using the vegetation water, obtained at the bottom of the AD in the dialyzing RO section. RO operates at ambient temperature and pressure of 3.0-4.0 MPa, while AD operates at ambient pressure and a temperature ranging from about 373 K at the bottom and about 313 K at the top. The choice between these two configurations is mainly related to the potentiality of the plant. Up tens cubic meters of wine per day (local level), the semi-batch one is preferable for lower capital investment as well as for the running costs, other than for the operating flexibility; for processing hundreds cubic meters of IW per day (regional or national level) the continuous one should be preferable. The operating procedure for starting and running a continuous plant is well known; however, referring to the continuous ROAD process one should account for the management of the initial transient that occurs at the beginning, and each time after the backwashing.

As shown in Fig. 2 , the mass flow rate of retentate in the individual stages was constant to ensure that the concentration of the solid extract was almost the same and the rejection of the solid solute practically complete. The performance of the process (i.e., the final alcoholic concentration of the dealcoholized aqueous solution of the solid extract) is strongly dependent from both the number of the stages and the flow rate of the recirculating stream of vegetation water (RVW). The results, shown on Fig. 3 , allows selecting optimal operating conditions (located on the knee of each curve) concerning the desired degree of the alcoholic strength of the final retentate as well as both processing stability and inexpensiveness.

As can be seen in Fig. 3 , using a single-stage RO section the alcoholic strength of DSSE never drops below 2% abv, even when the flow rate of the recycled water is an order of magnitude higher of the water entering with IW. With two stages RO section, the alcoholic strength of DSSE drops to about 0.5% abv when the flow rate of the recycled water is a bit less than the water entering with IW. Finally, with Fig. 1 Schematic diagram of the continuous ROAD process equipped with a two-stages countercurrent RO section J Food Sci Technol three stages RO section the alcoholic strength of DSSE drops to less than 0.2% abv by recycling about 25% of the water entering with IW. Table 1 reports the results of the material balance for the continuous process schematically shown in Fig. 1 .

The required energy for a unit amount of dealcoholized wine by vacuum distillation was calculated by Aspen Plus V10 process simulator in 220 kcal/kg. For comparison, it was also calculated for the continuous ROAD process under optimal operating conditions with two and three RO stages finding, 188 and 183 kcal/kg, respectively. As can be seen, the ROAD process which makes use of countercurrent multistage RO section in dialyzing mode allows saving more than 15% of energy. Furthermore, with the ROAD process, it is possible to separate the four pseudo-components of IW while the vacuum distillation gives only two products. A Similar consideration holds for the SCC technology characterized by an energy consumption about 15% higher than vacuum distillation. Atmospheric distillation is not applicable while RO alone is not comparable because it produces a very dilute alcoholic solution which must be distillated to recover the Ethanol.

When considering the semi-batch ROAD process, the first observation is that there is not an initial transient; furthermore, using two single-stage RO sections that operate alternately, the process becomes practically continuous thus avoiding problems to the regular operation of the AD. A production cycle, based on the semi-batch ROAD process includes two or more steps. The whole amount of VW collected in the corresponding tank (VWAT) at the end of each step, serves for performing the next step. The production cycle starts by charging the washing tank (WT) with the wine to be fractionated, which, in turn, is continuously fed at a constant flow rate (F) to the RO section. Here F is divided into two liquid streams: the Retentate (R), and the Permeate (P). R is made of the whole amount of the total solid extract, containing all the thermosensitive compounds, dissolved in an aqueous solution of Ethanol having the same composition, on solute freebasis than in F; R continuously recycles back to the washing tank (WT). P is made up mostly of water and Ethanol, in the same proportion as they are in the F, plus a tiny amount (ppm) of VAC. Therefore, since P does not contain any thermosensitive compounds, it can be fractionated by the AD, instead of the more energy-intensive vacuum distillation, just avoiding the combined effect of both oxygen and temperature for preserving the integrity of the VAC. The first step ends when the volume of the solution contained in the WT is ten times lower than the initial one. The second step starts by transferring to the washing tank the whole amount of water accumulated in the VW tank during the first step.

The resulting solution is afresh reprocessed by RO using the same procedure as in the first step, i.e. until the volume of the liquid solution in the WT is equal to that was in there at the end of the first step. A third step could reduce further the concentration of Ethanol in the final solution of the solid extract.

As can be seen in Table 2 , the alcoholic strength of this solution becomes very low already at the end of the second step.

At the end of a production cycle, one can collect each final fraction into the corresponding storage tank, while refilling WT by wine for starting a new production cycle. Recombining these fractions allows the production of a wide variety of wine-derived custom products. Table 3 shows the volume and the concentrations of the four purified products of the semi-batch ROAD process.

The proposed ROAD process allows fractionating the industrial wine into its four main pseudo-components, namely: vegetation water, concentrated aqueous solution of Thanks to a multi-stage reverse osmosis section operating at room temperature, the ROAD process: (a) does not require the addition of any foreign substances, thus avoiding any contamination; (b) it can avoid any organoleptic and functional damage to thermolabile compounds, wholly confined into the concentrated aqueous solution of the solid extract.

Since the Road process results from the interconnection of two fractionation sections operating at quite a different temperature level, it is possible to recover most of the thermal energy of the products streams produced by distillation, for preheating the feed coming from the reverse osmosis section. Consequently, the ROAD process is significantly less energy-intensive of the vacuum distillation and the spinning cone column.

The four products obtainable by applying the ROAD process to the industrial wine are used as such, as bases for similar products by minimal further processing (e.g., freeze-drying of the concentrated aqueous solution of the solid extract) or as an ingredient, mainly for the food and the beverage industry.

However, the most exciting way of using these products is the recombination of two or more of them to make, time by time, a large variety of wine-based products in order to satisfy the requirements of many niche markets already existing, or emerging, all around the world. Some significative examples of already marketable products are: alcoholic-free wine, partially dealcoholized wine with specified alcoholic strength, dyes, healthy products, foodgrade alcohol and spirits, and aromas.

Acknowledgements The authors would like to thank the National Ministry of the University (MIUR) for financial support.

Funding Open Access funding provided by Università degli Studi dell'Aquila.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons. org/licenses/by/4.0/. 

Spray-dried Ancellotta red wine: natural colorant with potential for food applications

Resveratrol improves health and survival of mice on a high-calorie diet

Dealcoholized wines by spinning cone column distillation: phenolic compounds and antioxidant activity measured by the 1,1-diphenyl-2-picrylhydrazyl method

Supercritical fluid extraction of ethanol from aqueous solutions

Commission Delegated Regulation (EU) 2020/592 on temporary exceptional measures derogating from certain provisions of Regulation (EU) No 1308/2013 of the European Parliament and of the Council to address the market disturbance in the fruit and vegetables and wine sectors caused by the COVID-19 pandemic and measures linked to it

Commission Implementing Regulation Action (EU) 2016/1150 laying down rules for the application of Regulation (EU) No1308/2013 of the European Parliament and of the Council as regards the national support programs in the wine sector

Official Journal of the European Union Decree of the Ministry of agricultural, and forestry policies No. 6705, Activation of the measures of the wine crisis distillation

Continuous fractionation of wine with dense carbon dioxide

Production of red wine polyphenols as ingredient for the food and pharmaceutical industry

Phase equilibria and process simulation for high-pressure supercritical extraction processes: experimental investigation. In: Pilavachi PA (ed) Energy efficiency in process technology

Membrane dealcoholization of different wine varieties reducing aroma losses. Modeling and experimental validation

Membrane technologies in wine industry: an overview, critical reviews

Absorption of three winerelated polyphenols in three different matrices by healthy subjects

A novel function of the red wine polyphenols in humans: prevention of absorption of cytotoxic lipid peroxidation products

Engineering a Saccharomyces cerevisiae wine yeast that exhibits reduced Ethanol production during fermentation under controlled microoxygenation conditions

Recovery of wine-must aroma compounds by supercritical CO 2

Binary and ternary phase behaviour of the system waterethanol-carbon dioxide

Alcohol in moderation: market potential for low alcohol wine before and after excise tax increase

Relationship between antioxidant capacity and total phenolic content of red, rosé and white wines

Polyphenol content and total antioxidant activity of Vini Novelli (young red wine)

Low and reduced-alcohol wine: a review

Wine, alcohol, platelets and the french paradox for coronary heart disease

Non-alcoholic wine market forecast, trend analysis & competition tracking. Global Market Insights

The implementation of the OIV standards at the international level and in the framework of innovation in the wine sector

Supercritical CO 2 extraction applied toward the production of a functional beverage from wine

Production technologies for reduced alcoholic wines

Bioavailability of wine-derived phenolic compounds in humans: a review

Wine flavor and aroma

Wine Intelligence Report Brochure, Lower Alcohol Wines. A Multimarket Prospective