key: cord-0900238-6ji9drsp
authors: Ilardi, Federica; Santoro, Ciro; Maréchal, Patrick; Dulgheru, Raluca; Postolache, Adriana; Esposito, Roberta; Giugliano, Giuseppe; Sannino, Anna; Avvedimento, Marisa; Leone, Attilio; Cirillo, Plinio; Stabile, Eugenio; Lancellotti, Patrizio; Esposito, Giovanni
title: Accuracy of global and regional longitudinal strain at peak of dobutamine stress echocardiography to detect significant coronary artery disease
date: 2021-01-12
journal: Int J Cardiovasc Imaging
DOI: 10.1007/s10554-020-02121-y
sha: b4615c38cb91847bda95b1fb41c9b586f7ec5cf8
doc_id: 900238
cord_uid: 6ji9drsp

Dobutamine stress echocardiography (DSE) is sensitive but subjective diagnostic tool to detect inducible ischemia. Nowadays, speckle tracking allows an objective quantification of regional wall function. We aimed to investigate the feasibility and accuracy of global (GLS) and regional longitudinal strain (RLS) during DSE to detect significant coronary stenosis (SCS). We conducted a prospective observational multicenter study including patients undergoing DSE for suspected SCS. 50 patients with positive DSE underwent coronary angiography. Besides visual regional wall motion score index (WMSI), GLS and RLS were determined at rest and at peak stress by Automated Function Imaging. DSE GLS feasibility was 96%. Among 35 patients with SCS, 12 patients were affected by multivessel disease, 18 had stenosis of left anterior descending artery (LAD), 18 of left circumflex (LCX) and 15 of right coronary artery (RCA). At peak stress, both GLS reduction (p = 0.037) and WMSI worsening (p = 0.04) showed significant agreement with coronary angiography for detecting SCS. When single lesion was considered, peak stress GLS and LAD RLS were lower in the obstructed LAD regions than in normo-perfused territories (17.4 ± 5.5 vs. 20.5 ± 4.4%, p = 0.03; 17.1 ± 7.6 vs. 21.6 ± 5.5%, p < 0.02, respectively). Furthermore, the addition of RLS to regional WMSI was able to improve accuracy in LAD SCS prediction (AUC 0.68, p = 0.037). Conversely, in presence of LCX or RCA SCS, LS was less accurate than WMSI at peak stress. In conclusion, DSE strain analysis is feasible and may improve prediction of LAD SCS, whereas regional WMSI assessment performs better in presence of SCS of LCX and RCA.

Dobutamine stress echocardiography (DSE) is a recognized test to detect presence and location of coronary artery disease, thanks to its good diagnostic accuracy [1, 2] . However, it remains a subjective method, limited by operators experience on image acquisition and interpretation [3] [4] [5] . Moreover, the detection of myocardial ischemia during DSE seems to be even more challenging in the presence of pre-existing wall motion abnormalities [6, 7] . In the last years, speckle tracking echocardiography has emerged as an effective tool for the quantitative assessment of regional wall function [8] [9] [10] [11] . Accordingly, the use of this advanced technology during DSE has been proposed as a more objective method to reveal inducible ischemia, being also validated against sonomicrometry in experimental studies [12] [13] [14] . To date, few reports have described the ability of speckle tracking to detect myocardial ischemia during DSE and mostly in patients without previous regional wall motion abnormalities [15] [16] [17] . Considering the exclusion of patients with previous history of coronary artery disease from these studies, their results cannot be extended to this subset of patients. In the present study, we sought to assess the feasibility and accuracy of global (GLS) and regional longitudinal strain (RLS) during DSE to detect significant coronary artery disease in both patients with and without previous wall motion abnormalities.

This is a prospective observational multicentre study, which included 88 consecutive patients referred for DSE to our cardiac imaging laboratory from October 2015 to December 2018. DSE was prescribed on the suspicion of obstructive coronary artery disease based on symptoms and/or the results of exercise ECG. Patients affected by acute coronary syndrome, significant valvular and congenital heart disease, atrioventricular block, persistent atrial fibrillation, complex ventricular arrhythmias, idiopathic cardiomyopathy, poor acoustic window which prevented a correct evaluation of all myocardial segments, were excluded from the study. The study protocol also included invasive coronary angiography, which was performed on an average of 12 ± 11 days following DSE. The study was conducted in accordance with the amended Declaration of Helsinki. All patients gave their written informed consent at enrollment. Patients data were collected in an anonymous way.

DSE was performed according to standardized staged protocol [18, 19] through an intravenous peripheral infusion with a mechanical pump, starting at dose of 5 µg/Kg/min and increasing at 3-min intervals to 10, 20, 30 and 40 µg/Kg/ min. Intravenous atropine up to 1 mg was given at the end of the final stage if needed to increase the heart rate to the target response (85% of age-predicted maximal heart rate). ECG was monitored continuously, and blood pressure was measured at each stage. The test was considered positive in case of development of angina pectoris, new wall-motion abnormalities in at least two contiguous regional segments at any stage of dobutamine infusion, left ventricular endsystolic dilation or severe ischemic ECG changes [19] .

Transthoracic echocardiography was performed with subjects in the left lateral decubitus position by experienced echocardiographers (RD, RE), using Vivid E95 and M4S transducer (General Electric Healthcare, Horten, Norway) and stored on a dedicate workstation for off-line analysis (EchoPAC, GE Healthcare). Standard 2D grey scale images of three apical views (four-and two-chamber view, and apical long-axis), parasternal long-axis and parasternal short-axis at the level of papillary muscles were acquired at rest, at low dobutamine dose (20 µg/Kg/min), at peak stress and at early recovery (within 2 min after stress). Left ventricular end-diastolic volume, end-systolic volumes and ejection fraction were measured at rest and at peak stress using Simpson's biplane method of discs [20] .

Wall motion was assessed by at least 2 experienced independent observers (FI, CS) using a 17 myocardial segment model, as recommended by guidelines [20] . A semiquantitative scoring system was used to analyse each segment (1 = normal or hyperkinetic; 2 = hypokinetic; 3 = akinetic; 4 = dyskinetic). Global wall-motion score index (WMSI) was calculated as the average of the scores assessed for each segment at rest and at each DSE stage. Figure 1 shows the 17 segments model divided according to perfusion territories of the three major coronary arteries, based on a standardized perfusion model [21] . According to this model, basal, midventricular and apical segments of anteroseptal and anterior walls, and the apex were attributed to left anterior descending artery (LAD) territory. Basal and midventricular segments of posterior wall, and all lateral wall segments (basal, midventricular and apical) were attributed to left circumflex (LCX) coronary artery territory. All inferior wall segments and basal and midventricular segments of posterior septum were attributed to right coronary artery (RCA) territory ( Fig. 1 ). Regional WMSI for each coronary territory was calculated.

Strain analysis was based on speckle-tracking approach and measured by an experienced cardiologist blinded to the clinical history and coronary angiography results (FI, CS). In order to enable GLS analysis, two-dimensional grayscale images from the apical four-chamber, twochamber, and long-axis views were acquired at frame rates between 50 and 80 frames/s (mean 63.1 ± 4.4 frames/s), in loops of three successive cardiac cycles. Speckle tracking was performed using the Automated Function Imaging (AFI) algorithm, that is incorporated in a quad-screen of the echo machine, and automatically analyses myocardial motion by tracking frame-to-frame speckle changes. When necessary, manual adjustments were performed to ensure correct 'anchorage' to the mitral annulus, to exclude papillary muscles and chordae from tracking, and to correctly include the left ventricular apex. The width of the region of interest was eventually adjusted to cover the entire myocardial wall thickness. The left ventricle was divided into six myocardial segments in each view, and GLS was calculated as the average of peak longitudinal strain of all segments at end systole [22] . RLS resulted from the sum of the territorial segmental strain divided by the number of segments visualized, applying the same perfusion model used for the regional WMSI analysis ( Fig. 1 ). Inadequate tracked segments were automatically excluded from the analysis. When more than 2 segmental strain within the same coronary territory was not measurable, the strain analysis was considered unfeasible.

Selective coronary angiography was performed in multiple projection according to the Judkins technique, in all patients who underwent positive DSE for inducible ischemia, within 8 weeks of echocardiographic examination. All images were interpreted by experienced operators (GE, ES, PC), who based the estimation of the degree of coronary artery narrowing on visual assessment of angiograms. Significant coronary stenosis (SCS) were defined as ≥ 50% for left main coronary artery, ≥ 70% for the others epicardial arteries. When visual assessment was suggestive of intermediate coronary lesions (40-70% obstruction), fractional flow reserve was performed and SCS was defined with fractional flow reserve < 0.80.

Statistical analyses were performed using IBM-SPSS, version 23 (SPSS Inc, Chicago, IL, USA).

Continuous variables were expressed as mean ± SD and compared with unpaired Student t-test. Categorical data were expressed as percentage and comparisons were made by χ 2 test. A p value < 0.05 was considered statistically significant. Patients were divided in two groups according to the presence of obstructive coronary artery disease detected at coronary angiography. Inter-rater agreement Kappa (κ) was used to evaluate agreement between DSE or RLS analysis and coronary angiography considered as gold standard. When there is perfect agreement, κ is 1. Receiver operating characteristic (ROC) curves were used to evaluate the diagnostic performance of RLS, regional WMSI analysis and their combination.

A total of 88 patients performing DSE were screened for the study. 33 patients were excluded from further analysis because of absence of inducible ischemia at DSE; 3 patients refused the angiographic examination; 2 patients were rejected due to suboptimal RLS quality. The final study population consisted of 50 patients with positive DSE for inducible ischemia. In 8 cases, stress test was interrupted before reaching the target heart rate because of development of angina pectoris (n = 4), occurrence of complex ventricular ectopy (n = 2) or symptomatic hypotension (n = 2) associated with new/worsening wall-motion abnormalities. All patients underwent elective coronary angiography; in 35 (70%) of them SCS was detected. During coronary angiography, the estimation of coronary stenosis severity required fractional flow reserve evaluation in 10 cases. Table 1 reports demographic, clinical and angiographic results of the study population according to the presence or absence of SCS at coronary angiography. Previous percutaneous coronary interventions or coronary artery bypass grafting were more prevalent in patients with SCS (77.1 vs. 33.3% respectively, p = 0.003).

The feasibility of DSE GLS was 96% (n = 50/52). Of the 850 analyzed myocardial segments, 13 (1.5%) at peak stress were rejected due to poor tracking. Table 2 summarizes the main echo parameters at rest and during DSE. Of note, 31 (62%) patients had already wall motion abnormalities at rest, with no significant differences between the groups of patients with or without coronary artery disease (69% vs. 47% respectively, p = 0.144). Left ventricular ejection fraction and volumes, WMSI and GLS did not differ between the two groups at rest and at peak stress. Table 3 reports the concordance in detecting SCS between coronary angiography and both global and regional WMSI and LS at peak stress. The agreement at DSE peak was mild between both WMSI and GLS with coronary angiography (p = 0.041 and p = 0.037, respectively). The agreement between DSE and coronary angiography was higher for RLS for LAD SCS (p = 0.022) compared to regional WMSI (p = 0.031). More precisely, in 94.3% of cases RLS correctly identified significant LAD stenosis, compared to only 56% properly diagnosed by regional WMSI.

When considering SCS of LCX and RCA territories, a significant, despite mild, agreement with coronary angiography was observed only with regional WMSI (p = 0.05 and p = 0.005, respectively). Figure 2 depicts comparisons results of global and regional WMSI, GLS and RLS according to the perfusion territory supplied by the given SCS at peak stress. Regional WMSI appeared to be significantly higher when SCS occurred, independently from which coronary was affected (LAD p = 0.029, LCX p = 0.011, RCA p = < 0.02). GLS and RLS were lower in the myocardial regions supplied by obstructed LAD than in regions supplied by patent LAD (GLS p = 0.035; RLS p = 0.021). Conversely, no differences were shown in strain analysis when obstruction of the LCX and RCA was observed.

The ROC curves and areas under the curve (AUC) values for RLS, regional WMSI and their combination for the detection of SCS according to the perfusion territory of the three major coronary arteries are shown in Fig. 3 . In territories supplied by obstructed LAD, only the combination of RLS at peak stress with regional WMSI abnormality is able to provide a statistically significant AUC value (p = 0.037, AUC = 0.68) (Fig. 3a) . As expected, regional WMSI showed good accuracy in detecting ischemia in presence of LCX SCS (p = 0.021, AUC = 0.69), while the addiction of RLS to visual wall motion assessment wasn't able to improve accuracy (p = 0.033, AUC = 0.68) (Fig. 3b) . In myocardial segments supplied by obstructed RCA, instead, the addition of RLS to regional WMSI provided slightly higher accuracy in detecting SCS (p = 0.003, AUC = 0.77) compared to regional WMSI alone (p = 0.005, AUC = 0.75). (Fig. 3c) . Interestingly, considering only those patients with resting wall motion abnormalities (n = 31), GLS and RLS -but not global or regional WMSI-were able to identify SCS of LAD coronary artery (p = 0.011 and p = 0.021, respectively) (Fig. 4) . Also in this subgroup of patients, GLS and RLS could not distinguish LCX SCS. In myocardial regions supplied by obstructed RCA, instead, RLS-but not GLS-was significantly lower than in regions supplied by patent coronary artery (p = 0.042) (Fig. 4) . 

This study demonstrated that: (i) the assessment of longitudinal strain during DSE is feasible even at the elevated heart rate reached during DSE peak; (ii) GLS and RLS at DSE peak are more sensitive than visual WMSI assessment to detect inducible ischemia in the myocardial territories supplied by LAD; (iii) these results are more evident when patients with resting wall motion abnormalities are considered; (iv) in territories supplied by LCX and RCA, GLS and RLS are less reliable to detect obstructive lesions. Longitudinal strain analysis during DSE has been recently proposed as a quantitative method to overcome the limitation of the visual evaluation of regional wall motion. Despite an average accuracy of > 80% for detection of coronary artery stenosis [2] , traditional stress echocardiography is characterized by a subjective interpretation of wall motion abnormalities, even among expert readers [1] [2] [3] . This limitation is still more evident in patients with history of coronary artery disease and previously known wall motion abnormalities, a setting in which the identification of residual and/or new areas of ischemia becomes very challenging [6, 7] . In fact, the growth of collateral circulation or the imperfect assignment of myocardial regions to coronary arteries may contribute to the underestimation of ischemia under these circumstances. In our previous experience, we have shown that AFI-derived GLS measured at DSE peak was more accurate than visual WMSI to detect inducible ischemia in patients with three vessel and left main disease [23] . The present study demonstrates that AFI technique can be performed Fig. 2 Bar graph showing comparison between global and regional WMSI, GLS and RLS according to the perfusion territory supplied by the given SCS at peak stress during DSE, allowing a correct and almost complete analysis of myocardial deformation at every stages of stress protocol. AFI applied to DSE showed a feasibility of 96%, which is in line with previous literature, where feasibility ranged from 77 to 100% [19] . Non-angle dependent and better signalto-noise ratio represent two main advantages for the use of strain analysis in the quantitative assessment of myocardial region supplied by obstructed coronary artery. Furthermore, the utilization of phased array probes and software advancement provide an enhanced visualization of structures at the sides of the sector in combination with higher frame rate. This allows to overcome the previously observed limitation Fig. 3 Diagnostic performance of RLS, regional WMSI and their combination for the detection of regional myocardial ischemia in territories supplied by obstructed LAD (a), LCX (b) and RCA (c).

AUC area under the curve; CI confidence intervals; LAD left anterior descending artery; LCX left circumflex coronary artery; RCA right coronary artery; rWMSI regional wall motion score index of a poor speckles' identification occurring at DSE peak [23, 24] . Moreover, the automatic localization of endocardial borders enables a faster and objective quantitative analysis of myocardial longitudinal motion. The clear result presentation with a LV bullseye displaying segmental peak strain values and a corresponding polar map represents a handy tool to identify motion abnormalities even for less experienced operators (Fig. 5) .

As a result of these technical improvements, in the present study, GLS at DSE peak stress showed a moderate diagnostic accuracy in detecting SCS, as compared with the results of coronary angiography. Interestingly, when the analysis was restricted to patients with significant LAD stenosis, GLS and RLS showed a better agreement compared to WMSI in detecting SCS. Moreover, the addiction of RLS to the visual wall motion assessment of myocardial ischemia has shown to significantly improve diagnostic accuracy in predicting LAD SCS, over visual wall motion alone. This incremental value of strain imaging at DSE peak could represent an additional tool in reducing false negative results obtained by visual assessment, especially in patients with suspected LAD disease. LAD is usually the largest of the 3 epicardial coronary artery and subtends about 50% of the LV myocardial mass [25] . The presence of significant LAD disease has been associated with worse prognosis than SCS involving other coronary arteries [26, 27] . Thus, given the extent and functional relevance of the myocardial territories supplied by LAD coronary artery, a properly and timely detection of LAD stenosis represents an appealing task. To notice, the incremental value of GLS and RLS in the detection of LAD SCS seems to be even more useful in patients with previous wall motion abnormalities. In this subset of Fig. 4 Bar graph showing comparison between global and regional WMSI, GLS and RLS according to the perfusion territory supplied by the given SCS at peak stress in patients with previous wall motion abnormalities patients, indeed, strain analysis appears to be more sensitive than visual WMSI in identifying ischemia areas in myocardial segments supplied by LAD coronary artery.

The diagnostic power of both GLS and RLS was not accurate in detecting SCS of LCX and RCA territories where the visual analysis of regional wall motion showed a better agreement with coronary angiography in detecting SCS. It is commonly recognized that the ability to precisely identify a LAD obstruction during stress echocardiography exceeded that for the posterior circulation [19, 28] . Moreover, a discrepancy of the sensitivity between strain measurements in inferior and postero-lateral circulation than anterior coronary circulation had been described in previous studies [16, 17, 29] . In a study of 155 patients, Hanekom et al. reported the best sensitivity of 2D strain in LAD territories (sensitivity 77%, specificity 79%, accuracy 78%) [29] . Similarly, Aggeli et al. described a 2D-strain superior diagnostic efficiency for the evaluation of anterior coronary circulation, as compared to posterior circulation [17] . Roushdy et al. also demonstrated a superiority of 2D strain at DSE peak in detecting LAD and RCA lesions (κ = 0.775 and 0.415, respectively) [16] . A possible explanation of the reduced reliability of strain in inferior and posterior-lateral circulation could be attributable to the problematic visualization of the posterior endocardium, which compromises image quality, or to the overlap between right and circumflex artery territories, that makes a precise separation of these territories not feasible.

The main limitation of this study is the relatively limited sample size of the included population. Moreover, in the current study, we enrolled all patients with suspected ischemia, including those with previous coronary artery disease which could have represented a potential bias. The analysis of coronary artery disease localization was based on a standardized perfusion model, without considering the overlap in posterior circulation and anatomic variation regarding the coronary artery dominance of each patients. Load dependence of GLS need to be accounted considering dynamic changes in afterload during DSE [19] . However, even though it has not been considered in the design of this study, the effect of load changes throughout the different stages of DSE can be expected to be negligible when RLS is considered. Finally, the exclusion of patients with negative DSE from the study didn't allow the identification of true negative and false negative cases. 

AFI-based strain imaging analysis appears to be feasible during DSE even at the highest heart rate achieved at peak stress. Its use during DSE provides a slightly better agreement with coronary angiography results in presence of SCS of LAD, particularly in presence of resting wall motion abnormalities. Conversely, strain analysis correlates poorly with identification of SCS of both right and circumflex arteries, possibly due to scarce visualization of myocardial segments perfused by these two arteries and/ or to perfusion territory overlap. Future multicenter study on larger population sample size are needed to test the usefulness of strain imaging during DSE.

Stress echocardiography: a historical perspective

Methodology, feasibility, safety and diagnostic accuracy of dobutamine stress echocardiography

Stress echocardiography and the human factor: the importance of being expert

Analysis of interinstitutional observer agreement in interpretation of dobutamine stress echocardiograms

Refinements in stress echocardiographic techniques improve interinstitutional agreement in interpretation of dobutamine stress echocardiograms

Factors affecting sensitivity and specificity of diagnostic testing: dobutamine stress echocardiography

Quantitative dobutamine stress echocardiography using speckle-tracking analysis versus conventional visual analysis for detection of significant coronary artery disease after ST-segment elevation myocardial infarction

Duration of myocardial early systolic lengthening predicts the presence of significant coronary artery disease

Myocardial function in patients with radiation-associated aortic stenosis undergoing transcatheter aortic valve replacement: a layer-specific strain analysis study

Impact of aortic stenosis on layer-specific longitudinal strain: relationship with symptoms and outcome

Impaired right and left ventricular longitudinal function in patients with fibrotic interstitial lung diseases

Two-dimensional strain-a Doppler-independent ultrasound method for quantitation of regional deformation: validation in vitro and in vivo

Noninvasive myocardial strain measurement by speckle tracking echocardiography: validation against sonomicrometry and tagged magnetic resonance imaging

Experimental validation of circumferential, longitudinal, and radial 2-dimensional strain during dobutamine stress echocardiography in ischemic conditions

Two-dimensional speckle-tracking during dobutamine stress echocardiography in the detection of myocardial ischemia in patients with suspected coronary artery disease

The additional utility of twodimensional strain in detection of coronary artery disease presence and localization in patients undergoing dobutamine stress echocardiogram

Two-dimensional speckle tracking for the assessment of coronary artery disease during dobutamine stress echo: clinical tool or merely research method

Stress echocardiography expert consensus statement: European Association of Echocardiography (EAE) (a registered branch of the ESC)

Guidelines for performance, interpretation, and application of stress echocardiography in ischemic heart disease: from the American Society of Echocardiography

Recommendations for cardiac chamber quantification by echocardiography in adults: an update from the American Society of Echocardiography and the European Association of Cardiovascular Imaging

American Heart Association Writing Group on Myocardial Segmentation and Registration for Cardiac Imaging (2002) Standardized myocardial segmentation and nomenclature for tomographic imaging of the heart. A statement for healthcare professionals from the Cardiac Imaging Committee of the Council on Clinical Cardiology of the

Echocardiographic reference ranges for normal left ventricular 2D strain: results from the EACVI NORRE study

Quantitative detection of inducible ischemia during dobutamine stress by speckle tracking echocardiography: a dream comes true

Feasibility and correlation of standard 2D speckle tracking echocardiography and automated function imaging derived parameters of left ventricular function during dobutamine stress test

The variable extent of jeopardized myocardium in patients with singlevessel coronary artery disease: quantification by thallium-201 single photon emission computed tomography

Prognostic significance of severe narrowing of the proximal portion of the left anterior descending coronary artery

Effect of coronary occlusion site on angiographic and clinical outcome in acute myocardial infarction patients treated with early coronary intervention

Stress echocardiography: current methodology and clinical applications

Comparison of two-dimensional speckle and tissue Doppler strain measurement during dobutamine stress echocardiography: an angiographic correlation

Acknowledgements This paper is dedicated to the memory of our friend and colleague Maurizio Galderisi, who died on March 2020 because of COVID-19, and was one of my mentors at the conception of the study.Funding Open access funding provided by Università degli Studi di Napoli Federico II within the CRUI-CARE Agreement. Dr. Ilardi and Santoro are supported by a research grant from CardioPath PhD program. Other authors have nothing to disclose.

Conflict of interest The authors declares that they have no conflict of interest.Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creat iveco mmons .org/licen ses/by/4.0/.