key: cord-0898309-vbf0ngas
authors: Kovács, Ervin; Faigl, Ferenc; Mucsi, Zoltán
title: Regio- and Diastereoselective Synthesis of 2-Arylazetidines: Quantum Chemical Explanation of Baldwin’s Rules for the Ring-Formation Reactions of Oxiranes†
date: 2020-08-10
journal: J Org Chem
DOI: 10.1021/acs.joc.0c01310
sha: d57d8728e060acff3c18cfb4ab141b88774e5585
doc_id: 898309
cord_uid: vbf0ngas

[Image: see text] A general, scalable two-step regio- and diastereoselective method has been described for the synthesis of versatile alkaloid-type azetidines from simple building blocks with excellent overall yields. In the kinetically controlled reaction, only the formation of the strained four-membered ring can be achieved instead of the thermodynamically favorable five-membered rings under appropriate conditions. Remarkable functional group tolerance has also been demonstrated. In this paper, we give a new scope of Baldwin’s rules by density functional theory (DFT) calculations with an explicit solvent model, confirming the proposed reaction mechanisms and the role of kinetic controls in the stereochemical outcome of the reported transition-metal-free carbon–carbon bond formation reactions.

Despite the irrefutable importance of azetidines as bioactive compounds and pharmaceutical building blocks, they have received moderate attention compared to larger-ring-sized pyrrolidines and piperidines. 1−3 The most important strategy for the synthesis of saturated N-heterocycles relies on unimolecular cyclization reactions by nucleophilic substitution. This approach results in the efficient formation of three-, five-, and six-membered heterocycles but often fails to result in fourmembered heterocycles. In general, azetidines are considered the most difficult of all to form. 4 Azetidines have excellent physicochemical properties, bioavailability and metabolic stability. 5−8 A wide variety of antibiotics, 9−13 numerous anticancer agents 14, 15 containing azetidines, and other drug molecules have been developed over the last decade. 13,16−21 They have a significant role as synthetic building blocks of foldamers, 22, 23 N-heterocycles, 24−28 and polymers. 29 It has also been demonstrated, that the introduction of these strained rings improves enormously the fluorescent properties of rhodamines 30−32 and coumarins 33 and the efficacy of homogenous catalysts as ligands, 34, 35 which makes them an attractive and challenging synthetic topic for chemists nowadays. Compared to their widespread uses, there are relatively few synthetic methods available, although they cover a wide range of structural variability. 3,36−38 In conclusion, there are no general methods for the synthesis of azetidines, with a wide variety of functional groups. 39 Only a few methods for the preparation of druglike azetidines have been reported. 40−46 2-Arylazetidines also have a huge potential in synthetic and medicinal chemistry 47−51 (Scheme 1), even though no general synthetic method is known. Only a few approaches have been developed for the synthesis of 2-phenylazetidines. N-Protected 2-arylazetidines can be synthesized by stereospecific crosscoupling reactions, 52 by selective intermolecular sp 3 -C−H amination, 53 or by [2+2] photocycloaddition. 1 A few efficient synthetic methods of diversely substituted N-aryl-2-cyanoazetidines have also been published, based on an anionic ringclosure reaction, which requires the presence of an electronwithdrawing group (EWG) in the starting material. 54 A similar reaction promoted by an uncommonly used base has been reported by our group few years ago. 55 Our goal was to enrich the available chemical library with trans-3-(hydroxymethyl)-2-arylazetidines (1 in Scheme 1) for fragment-based drug discovery by a novel and versatile chemical synthesis from simple and readily available oxiranylmethyl-substituted benzylamines. This method is inspired by and designed according to Baldwin's rules. 56 While some theoretical explanation has been published in the last decade, 57−59 the quantum chemical background has not been established to date.

Our synthetic method to prepare 2-arylazetidines 1 consists of only two or four simple synthetic steps from commercially available starting materials (substituted oxiranes and N-alkylbenzylamines), providing a large range for functionalization.

The key intermediates 2 were synthesized from N-substituted benzylamines (3) and epichlorohydrin (4) or readily prepared 2-substituted-(oxiran-2-yl)methyl 4-toluenesulfonates (5−7) (Scheme 2). As was demonstrated earlier, these versatile epoxide intermediates could be synthesized easily in a two-step procedure from commercially available allyl alcohol derivatives (8) . 60, 61 The key intermediates 2 (0.5 mmol) were treated with the mixture of lithium diisopropylamide and potassium tertbutoxide (LiDA-KOR superbase) in tetrahydrofuran at −78°C

. The four-membered ring was formed regio-and diastereoselectively. 55 Noteworthily, compound 2 reacted exclusively on its benzylic position (Scheme 3), excluding the formation of alternative cyclic products. Spectroscopic investigations (J in 1 H NMR, ROESY, NOESY) of products confirmed that the substituents were situated in a trans geometry around the azetidine ring in positions 2 and 3.The application of other bases did not yield product 1. To test the feasibility of the reaction, the metalation of 2d (in structure 2 R 1 = Pr, R 2 = H, R 3 = Me, R 4 = H) was investigated by different types of organometallic bases used in analogue cases under similar conditions. 62 Using 3 equiv of lithium diisopropyl amide (LDA) or lithium 2,2,6,6-tetramethyl piperidide (LiTMP) or KHMDS (potassium hexamethyldisilazide), only unreacted 2d oxirane was isolated. When the reaction was performed by BuLi or LiC-KOR (a mixture of butyl lithium and potassium tert-butoxide), a complex mixture was obtained with low conversion and azetidine 1d was detected only in traces.

This reaction was proved to be a scalable process as 1k was prepared in 20 mmol scale with similar yields of the 0.5 mmol reaction.

In general, the isolated yields varied from moderate to good values with rather a good substituent tolerance, except a few examples. Compared to alternate literature protocols, this twostep synthetic procedure has significantly higher overall production and efficacy. In the cases when the R 1 /R 2 group was H, Pr, or Ph, the azetidine products were obtained in moderate to good yields without a significant appearance of any side product.

In contrast, the expected yields were slightly reduced for R 2 = CH 2 OTrt products, as some unidentified side products were formed in small amounts.

Various R 3 alkyl groups typically do not influence the good yields of the reactions. However, benzyl substitution allows the formation of certain byproducts through alternative deprotonation, lowering the overall yields. In the case of the product 1g, two diastereomers formed in 5/1 ratio (liquid chromatography−mass spectrometry, LC−MS), which were separated by common column chromatography. The N-boc protection at the N atom allows the parallel deprotonation at the C atom in ca. 1/1 ratio and the formation of an allylic-type byproduct (9, Scheme 4), which competes with the main ring-opening mechanism.

The electron donating group (EDG) substituents (tBu, OMe) and F at the Ph ring (R 4 ) had a beneficial effect on the yields of the reaction. In contrast, the strong EWG CF 3 group at para and ortho positions (see Supporting Information (SI)) could stabilize the benzyl anion and decreased its nucleophilic character to inhibit the ring opening. Benzylamine moietycontaining bicyclic compounds were also tested. The Noxiranylmethyl isoindole did not afford the desired fused heterocyclic product under the conditions applied. However, it should be emphasized that the reactions of the very similar tetrahydroisoquinoline derivatives have different routes, yielding completely different bridged heterocyclic systems. 63 Reaction Mechanism Study. It is well known for ringclosure reactions that generally five-membered heterocycles are formed more commonly than four-membered products. In general, the relative reaction rate of cyclization steps can be 2 orders of magnitude larger for five-membered rings. 4 Theoretical calculations were performed at the M06-2X/6-31G(d,p) level of theory 64 with the implementation of an implicit-explicit solvation model 65 (ε = 12.2) by G16. 66 The explicit model 67 includes one Li + ion and one K + ion, bound to the O − and the Ph ring, respectively, as shown in Figure 1 . Moreover, both cations were solvated by two explicit THF molecules each, to mimic the surrounding media in the best way. The calculated values are given in the SI.

From a thermodynamic point of view, there are five deprotonation sites at compound 2. However, the enthalpically Scheme 1. Chemical Skeleton of 2-Arylazetidine-3ylmethanol Derivatives (1) and Selected Examples for Bioactive 2-Arylazetidines a and kinetically more favorable deprotonation was found at the benzylic position (C1), in agreement with the experiment. During these reaction mechanism studies, we focused only on the ring-closure steps from the metalation, leading to products for one selected molecule as an example (2d → 1d), including all of the possible routes (Ia, Ib, IIa, and IIb, see Table 1 and Figure 1 ). The ring closure (Figure 1 ) of the metalated benzylaminomethyloxirane 2d-H + may theoretically result in both pyrrolidine (10d-H + -c, 10d-H + -t) and azetidine products (1d-c, 1d-t), but in our experiments, the trans four-membered heterocycle was formed regio-(up to 90%) and diastereoselectively.

The resulting negatively charged nucleophilic carbon atom (C1) can react with both electrophilic carbon atoms in the oxirane (C2 and C3) from two faces (routes Ia, Ib, IIa, and IIb), as shown in Figure 1 , leading to the two cis−trans product pairs (1d-c/1d-t and 10d-c/10d-t), allowed by Baldwin's rules. In terms of the calculated thermodynamic stability of the resulting products, the two five-membered pyrrolidine derivatives are more stable than the more stressed four-membered azetidine derivatives, regardless of their cis (10d-c → 1d-c: 80.2 kJ mol −1 ) or trans (10d-t → 1d-t: 63.0 kJ mol −1 ) arrangements. In general, the trans geometries are always more stable than cis (1d-c → 1d-t: 25.3 kJ mol −1 ; 10d-c → 10d-t: 8.1 kJ mol −1 ), which is due to the larger steric hindrance of the neighboring substituents (Table 1) . Since the isolated products were azetidine derivatives in all of the cases, these thermodynamic data allowed us to conclude that the reaction was controlled kinetically.

In the next section, we sought to answer the question of why the formation of the thermodynamically unfavorable fourmembered azetidines is more advantageous, in agreement with Baldwin's rules. The two lowest TSs undoubtedly belong to the formation of the two azetidines 1d-H + -t and 1d-H + -c, preferring the formation of trans products, in contrast to the formation of pyrrolidines (10d-H + -c, 10d-H + -t). The enthalpy (ΔH ‡ ) and Gibbs free energy (ΔG ‡ ) difference between the two lowest gaps is only about 10 kJ mol −1 . Due to the low reaction temperature applied, this difference provides sufficient diastereoselectivity under kinetic control, in good agreement with the experiments.

Although the computed TS values confirm the experimental findings, they did not give a deep explanation for the exclusive formation of the azetidine derivatives. Moreover, Baldwin's rules also provide only a superficial and phenomenological interpretation. To reveal more details about the mechanism, a bimolecular model reaction ((11+12) → TS-13 → 13, route III in Figure 1 ) was also carried out under the same condition as a concerted S N 2-type reaction, which mimics a nonrestricted alternative of the previous reaction ( Figure 1 ). Here, the deprotonated dimethyl benzylamide anion (12) reacts with trans oxiranes (11) . Surprisingly, the computed activation parameters (ΔH ‡ and ΔG ‡ ) are significantly higher compared to those in the formation of the stretched four-membered product and somewhat lower than in the case of the fivemembered product. On this basis, we suppose that the azetidine formation is superbeneficial.

In the ideal transition state for S N 2 reactions, the direction of the electrophile attack should be around 180°with the central atom and the leaving group, which provides the highest overlap between the nucleophilic highest occupied molecular orbital (HOMO) and the electrophilic lowest unoccupied molecular orbital (LUMO). In this ring-closure reaction, the central atom (C2 or C3) , the attacking carbanion (C1), and the leaving oxygen atom (O) cannot be in this optimal linear arrangement in either case due to the bent bond angles in the oxirane-ring.

Analyzing the geometries of the transition states leading to the five-(TS-10d-H + -c and TS-10d-H + -t) and four-membered rings (TS-1d-H + -c, TS-1d-H + -t; Figure 2 ), as well as the TS-13, we found that the angle of the attack enclosed by the C1− Figure 1 . Conversion of the epoxide (2d-H + ) into the four possible products (1d and 10d) via the four TSs (above), together with the bimolecular reaction (below). For the corresponding thermodynamic values, see Table 1 . The thermodynamic values of the (11+12) → TS-13 → 13 process are also given. For details, see Figure 1 . 127.5°). Moreover, the nonrestricted model also exhibits lower angles than TS-1d-H + (150.6°). The special preferred arrangement of the C1−C2−O in the TS-1d-H + is due to the stretched double bicyclic transition structure, which provides the optimal arrangement for the orbital overlap and can be illustrated by the Δα value (=180°− α, blue angles in Figures  2 and 3 ). In the case of route II, pyrrolidine is already distorted in the opposite direction, thereby significantly reducing the overlap.

This overlap between the HOMO of 12 and the LUMO of 13 is significantly less than that of the TS-1-H + , thanks to the dominance of the steric hindrance in the absence of the supporting ring stretch. Consequently, this may be the reason for the lowest activation ΔG ‡ of the four-membered trans azetidine derivative.

In summary, an efficient, scalable, and stereo-and diastereospecific method was developed for the preparation of 2arylazetidines (1), using strong alkali amide-type bases. The results of the quantum chemical investigation of the mechanism are consistent with the experimental findings and shed light on the details of the regio-and stereoselectivity of the azetidine formation reaction. Thus, we were able to find the quantum mechanical and structural explanation of Baldwin's rules for the ring opening of oxiranes, controlled by the balance between the ring stretch and overlap.

■ EXPERIMENTAL SECTION General Remarks. All commercial starting materials were purchased from Sigma-Aldrich Kft., Hungary, and were used without further purification. All organometallic reactions were conducted under a dry nitrogen atmosphere using the Schlenk-technique. Solvents were freshly distilled and dried over molecular sieves. 1 H NMR and 13 C { 1 H} NMR spectra were recorded at 500/300 and 126/75 MHz on Bruker Avance 500 or 300 spectrometers. All 1 H NMR and 13 C chemical shifts were referenced to the tetramethylsilane (TMS). All chemical shifts are quoted in parts per million (ppm), measured from the center of the signal, except in the case of multiplets, which are quoted as a range. Coupling constants are quoted to the nearest 0.1 Hz. Splitting patterns are abbreviated as follows: singlet (s), doublet (d), triplet (t), quartet (q), quintet (quin), sextet (sxt), multiplet (m), broad singlet (br. s), and combinations thereof. The assignment of spectra was aided by DEPT 135 and 1D (NOESY) and 2D NMR spectroscopy (NOESY, ROESY, HSQC). For the assignment, see SI NMR spectra.

HRMS-EI + data were obtained using either electrospray ionization (ESI) or electron impact (EI) techniques. High-resolution ESI analyses were performed on an Agilent 6230 TOF LC/MS spectrometer (ion trap; analyzed using Excalibur). High-resolution EI analysis was performed on an Autospec spectrometer (magnetic sector; analyzed using MassLynx).

Thin-layer chromatography (TLC) was performed on commercially available precoated TLC plates (Merck Silica gel 60 F 254 aluminum sheets or Merck aluminum oxide 60 F 254 plates). Visualization was achieved either under UV light at 254 nm or by exposure to iodine or the aqueous solution of (NH 4 ) 6 Mo 7 O 24 , Ce(SO 4 ) 2 , and sulfuric acid.

Flash column chromatography was performed by a CombiFlash R f 150 (Teledyne ISCO) apparatus using gradient elution in normal (silica column; hexane−ethyl acetate as the eluent) phase mode. Gradient elution preparative high-performance liquid chromatography (HPLC) was performed (HPLC Gilson 333 instrument, UV detector 220 nm) on a Phenomenex Gemini C18 (250 mm × 50.00 mm; 10 μm, 110 A) column using 0.4 g of NH 4 HCO 3 in 1 L of water and acetonitrile (A/B) or 10 mL of trifluoroacetic acid in 1 L of water and acetonitrile (C/B) as the two solvents.

General Procedures. General Procedure A for the Preparation of Trialkyl Amines from Epichlorohydrin. To a solution of amines (30.0 mmol, 1.0 equiv) in EtOH (4 mL) and water (2 mL) was added epichlorohydrin (30.0 mmol, 2.35 mL, 1.0 equiv) at 0°C using an ice bath. The mixture was stirred for 5 h at room temperature and then cooled to 0°C in an ice bath. Toluene (3 mL) and NaOH (0.054 mmol, 2.16 g) were added and then stirred at 25°C for 16 h. The mixture was concentrated under reduced pressure, and then water (20.0 mL) was added to it. The organic compounds were extracted with dichloromethane (4 × 30 mL). The combined organic layers were washed with brine (10 mL), dried over sodium sulfate, filtered, and concentrated under reduced pressure. The crude mixture was purified by column chromatography.

General Procedure B for the Preparation of Trialkyl Amines from Tosylates. Tosylate (10.0 mmol, 1.0 equiv) was dissolved in dry N,Ndimethylformamide (DMF, 10 mL) under a dry nitrogen atmosphere, and potassium iodide (5.00 mmol, 0.5 equiv) was added into it. The solution was cooled to 0°C in an ice bath, and the secondary amine (HNRR', 21.00 mmol, 2.1 equiv) was added into the solution. The reaction mixture was stirred for 24 h at 40°C and heated by an oil bath, and then it was poured into a mixture of ice (100 g), saturated sodium hydrogen carbonate solution (200 mL), and diethyl ether (50 mL). Then, the phases were separated and the aqueous mixture was The Journal of Organic Chemistry pubs.acs.org/joc Article extracted with diethyl ether (4 × 60 mL). The combined organic layers were washed with brine (50 mL), dried over sodium sulfate, filtered, and concentrated under reduced pressure. The crude mixture was purified by column chromatography. General Procedure C for the Preparation of N-Boc Aminomethyloxiranes. Sodium hydride (55% in mineral oil, 1.8 mmol, 72.2 mg, 1.5 equiv) was washed with dry hexane (3 × 3 mL) under a dry nitrogen atmosphere. Then, it was dried in vacuo followed by the addition of dry DMF (2 mL) and cooled (0°C in an ice bath). A dimethylformamide solution (7 mL) of N-boc-benzylamine derivative 68 (1.20 mmol, 1.0 equiv) was added dropwise to the cold (0°C) suspension of sodium hydride and DMF, and the mixture was stirred for 2 h at room temperature. The obtained yellowish solution was slowly added into a dry DMF solution (7 mL) of tosylate (1.2 mmol, 1.0 equiv) at 5°C and cooled in an ice bath under a nitrogen atmosphere. The reaction mixture was stirred for 24 h, and then it was poured into a mixture of ice (15 g) and saturated sodium hydrogen carbonate solution (10 mL). The aqueous mixture was extracted with diethyl ether (5 × 10 mL). The combined organic layers were washed with brine (10 mL), dried over sodium sulfate, filtered, and concentrated under reduced pressure. The crude mixture was purified by column chromatography.

General Procedure D for the Preparation of Azetidines via Superbase-Induced Reactions. Potassium tert-butoxide in tetrahydrofuran (THF, 1.0 mmol, 1 mL in 1 M THF solution) was cooled to −78°C in a cold bath, using dry ice in acetone, in a Schlenk tube under a nitrogen atmosphere and diluted with 1 mL of absolute THF. Diisopropylamine (1.0 mmol, 0.10 g, 0.14 mL, 2.0 equiv) and a 1.59 M hexane solution of butyllithium (1.5 mmol, 0.94 mL, 3.0 equiv) were added dropwise into the solution. The reaction mixture was stirred for 20 min at −78°C. Oxirane (2, 0.5 mmol, 1.0 equiv) in absolute THF (2 mL) was added dropwise, and the mixture was stirred at −78°C for 2 h. Water (10.0 mL) and diethyl ether (5 mL) were added to the cold mixture, and then it was allowed to warm up to room temperature. The phases were separated, and the aqueous phase was extracted with diethyl ether (3 × 5 mL). The combined organic layers were washed with brine (1 × 10 mL), dried over sodium sulfate, filtered, and concentrated under reduced pressure. The crude mixture was purified by column chromatography or in some cases by preparative HPLC.

Synthesis of Benzylaminomethyl-oxiranes. N-Benzyl-Nmethyl-1-(oxiran-2-yl)methanamine (2a). It was prepared according to general procedure A using N-methylbenzylamine (30.0 mmol, 3.64 g, 3.87 mL) and epichlorohydrin (30.0 mmol, 2.35 mL). Purification by column chromatography on silica gel (10−40% EtOAc in hexane) afforded the title compound as a yellowish oil (2a, 3.16 g, 18.0 mmol, 60%). 1 tert-Butyl (4-Methoxybenzyl)((3-propyloxiran-2-yl)methyl)carbamate (2h). It was prepared according to general procedure C using tert-butyl 13 C{ 1 H} NMR (CDCl 3 , 300 MHz) δ C : 143.7 (C[18] ), 134.4 (C[6] ), 133.8 (C[8] ), 132.4 (C [13] ), 128.6 (C [19] ), 128.4 (C[20] ), 128.0 (C [15] ), 127.9 (C[12] ), 127.4 (C [9] ), 127.1 (C[21] ), 125.8 (C[14] ), 125.6 (C [7] ), 125.1 (C[10] ), 124.6 (C [11] ), 86.9 (C[17] ), 62.1 (C[16] ), 60.7 (C[5] ), 55 

It was prepared according to general procedure B using isoindoline (4.2 mmol, 0.500 g) and (3-((trityloxy)methyl)oxiran-2-yl)methyl 4methylbenzenesulfonate (2.0 mmol, 1.00 g). Purification by column chromatography on Florisil (0−40% EtOAc in hexane) afforded 2w as a yellowish oil (0.780 g, 1.74 mmol, 87%). 1 (1-Benzyl-2-phenylazetidin-3-yl)methanol (1c). It was prepared according to general procedure D using 2c (1.70 mmol, 431 mg). Purification by column chromatography on silica gel (40−80% EtOAc in hexane) afforded the title compound (1c) as a yellowish oil (105 mg, 0.29 mmol, 25%). Pure TFA salt of 1c can be isolated by preparative HPLC (using 0.1% TFA in 1 L of water and acetonitrile). (1-Ethyl-2-phenylazetidin-3-yl)butan-1-ol (1e). It was prepared according to general procedure D using 2e (0.89 mmol, 200 mg). Purification by column chromatography on silica gel (40−100% EtOAc in hexane) afforded the title compound (1e) as a yellowish oil (178 mg, 0.76 mmol, 89%). 1 1-(2-Phenyl-1-(1-phenylethyl)azetidin-3-yl)butan-1-ol (1g). It was prepared according to general procedure D using 2g (0.97 mmol, 300 mg). Purification by column chromatography on silica gel (10−100% EtOAc in hexane) afforded the title compound (1g_diastereomer I; 139 mg, 0.45 mmol, 46%) and (1g_diastereomer II; 85 mg, 0.28 mmol%) as a yellowish oil (in overall 70% yield). 1g_diastereomer I: 1 Scale-up Synthesis. Potassium tert-butoxide (40 mmol, 4.49 g, 2.0 equiv) was dissolved in dry THF (50 mL) and cooled to −78°C, using dry ice in acetone, in a Schlenk flask (200 mL) under a nitrogen atmosphere. Diisopropylamine (40 mmol, 4.05 g, 5.65 mL, 2.0 equiv) and a 1.59 M hexane solution of BuLi (46 mmol, 29 mL, 2.3 equiv) were added dropwise into the solution (yellowish). The reaction mixture was stirred for 20 min at −78°C. Oxirane (2k, 8.98 g, 20 mmol, 1.0 equiv) in dry THF (100 mL) was added dropwise, the dark red mixture was stirred at −78°C for 2 h. The cold reaction mixture was poured carefully into the mixture of diethyl ether (100 mL) and water (50.0 mL), and then it was allowed to warm up to room temperature. The phases were separated, and the aqueous phase was extracted with diethyl ether (3 × 100 mL). The combined organic layers were washed with brine (1 × 200 mL), dried over sodium sulfate, filtered, and concentrated under reduced pressure. The crude mixture (8.4 g) was purified by flash chromatography on silica gel (50−100% EtOAc in hexane), affording 1k as an off-white solid (7.01 g, 15.7 mmol, 78%). 1 The Journal of Organic Chemistry pubs.acs.org/joc Article

Hz C[12]-H), 3.00 (1H, dd, J = 9

HRMS (ESI) m/z: [M + H] + calcd for C 35 H 38 NO 4 536.2801; found 536.2805. 1-(2-(4-Methoxyphenyl)-1-methylazetidin-3-yl)-2-(trityloxy)-ethan-1-ol (1o)

−7.24 (11H, m, Ar-H)

13 C{ 1 H} NMR (CDCl 3 , 75 MHz) δ C : 158.9

-Methoxyphenyl)-1-methylazetidin-3-yl)-2-(trityloxy)-ethan-1-ol (1p)

−7.12 (11H, m, Ar-H)

6.76 (1H, dd, J = 7.5 Hz, 1.8 Hz C

3.38 (1H, t, J = 6

64 (1H, t, J = 6

It was prepared according to general procedure D using 2q (0.43 mmol, 200 mg). Purification by column chromatography on silica gel (40−100% EtOAc in hexane) afforded the title compound (1q) as a yellowish solid (160 mg, 0.35 mmol, 80%). 1 H NMR (CDCl 3

1-Methyl-2-(naphthalen-2-yl)azetidin-3-yl)-2-(trityloxy)ethan-1-ol (1r

Purification by preparative HPLC (using 0.4 g of NH 4 HCO 3 in 1 L of water and acetonitrile) afforded the title compounds 1s_trans (51 mg, 0.20 mmol, 23%), 1s_cis (15 mg, 0.06 mmol, 7%), 10_trans (48 mg, 0.23 mmol, 19%), and 10_cis (30 mg, 0.23 mmol, 12%) as yellowish oils

500 MHz) δ H : 7.25−7.09 (10H, m, aromatic H), 5.44 (1H, bs, OH), 4.60 (1H, d, J = 5.9 Hz, C

HRMS (ESI) m/z

CDCl 3 , 500 MHz) δ H : 7.28−7.18 (8H, m, aromatic H)

3.34 (1H, d, J = 10

13 C{ 1 H} NMR

HRMS (ESI) m/z: [M + H] + calcd for C 17 H 20 NO 254.1539

13 C{ 1 H} NMR

HRMS (ESI) m/z: [M + H] + calcd for C 17 H 20 NO 254.1539; found 254.1542. (1-Ethyl-2-phenylazetidin-3-yl)(phenyl)methanol (1t)

HRMS (ESI) m/z

Purification by column chromatography on silica gel (0−10% MeOH in DCM) afforded the title compound (1u) as a white solid (146 mg, 0.44 mmol, 65%). 1 H NMR (CDCl 3

NMR spectra of compounds 1, 2, and 9 and data of quantum chemical calculations

Research Centre for Natural Sciences

Email: kovacs.ervin@ ttk.hu Zoltań Mucsi − Femtonics Ltd

Functionalized Azetidines via Visible Light-Enabled Aza Paterno-Buchi Reactions

Novel Syntheses of Azetidines and Azetidinones

Escape from Flatland: Increasing Saturation as an Approach to Improving Clinical Success

Role of Biotransformation Studies in Minimizing Metabolism-Related Liabilities in Drug Discovery

Mitigating Heterocycle Metabolism in Drug Discovery

Drug-Like Properties: Concepts, Structure Design and Methods

Modifying the Lipophilic Part of Phenylthiazole Antibiotics to Control Their Drug-Likeness

Discovery of Azetidine Based Ene-Amides as Potent Bacterial Enoyl ACP

Octan-8-Yl)Isonicotinamide Derivatives and Their Biological Evaluation

Allosteric Inhibitors of Mycobacterium Tuberculosis Tryptophan Synthase

Maximizing ER -α Degradation Maximizes Activity in a Tamoxifen-Resistant Breast Cancer Model: Identification of GDC-0927

-Chlorophenoxy)Ethynazetidin-3-Yl)-Methyl)Acetamide Derivatives and Related Compounds as ATF4 Inhibitors for Treating Cancer and Other Diseases. WO2019008507A1

Synthesis and in Vitro Evaluation of Inhibitors of Intestinal Cholesterol Absorption

(Hetera)Cyclobutyl)Azetidines, "Stretched" Analogues of Piperidine, Piperazine, and Morpholine: Advanced Building Blocks for Drug Discovery

Novel Azetidine Derivatives Useful as Modulators of Cortical Catecholaminergic Catecholaminergic Neurotransmission. CN109963834A

Cell Death and Mitochondrial Dysfunction Induced by the Dietary Non -Proteinogenic Amino Acid l -Azetidine -2 -Carboxylic Acid (Aze)

Synthesis of a Bicyclic Azetidine with In Vivo Antimalarial Activity Enabled by Stereospeci Fi c, Directed C(Sp3) − H Arylation

Activity of Insulin-Degrading Enzyme

Synthesis and Conformational Study of Model Peptides Containing N-Substituted 3-Aminoazetidine-3-Carboxylic Acids

Synthesis of New Functionalized Aziridine-2-and Azetidine-3-Carboxylic Acid Derivatives of Potential Interest for Biological and Foldameric Applications

Analogues of Piperidine, Piperazine and Morpholine: Advanced Building Blocks for Drug Discovery

Competitive Ring Expansion of Azetidines into Pyrrolidines and/or Azepanes

Rh-Catalyzed Chemoselective [4 + 1] Cycloaddition Reaction toward Diverse 4-Methyleneprolines

Asymmetric Synthesis of 3,4-Disubstituted 2-(Trifluoromethyl)Pyrrolidines through Rearrangement of Chiral 2-(2,2,2-Trifluoro-1-Hydroxyethyl)Azetidines

Hydrogenolysis of N-and O-Protected Hydroxyazetidines over Palladium: Efficient and Selective Methods for Ring Opening and Deprotecting Reactions

Aziridines and Azetidines: Building Blocks for Polyamines by Anionic and Cationic Ring-Opening Polymerization

A General Method to Fine-Tune Fluorophores for Live-Cell and in Vivo Imaging

A General Method to Improve Fluorophores for Live-Cell and Single-Molecule Microscopy

High Photostability in Nonconventional Coumarins with Far-Red/NIR Emission through Azetidinyl Substitution

Photolabile Coumarins with Improved Efficiency through Azetidinyl Substitution

Evaluation of Enantiopure N-(Ferrocenylmethyl)Azetidin-2-Yl(Diphenyl)Methanol for Catalytic Asymmetric Addition of Organozinc Reagents to Aldehydes

Access to Chiral 2,5-Pyrrolidinyl Dispirooxindoles via Dinuclear Zinc-Catalyzed Asymmetric Cascade Reactions

3-and 4-Membered Rings, with All Fused Systems Containing 3-and 4-Membered Rings

The Azetidines. Recent Synthetic Developments

Advances in Synthesis and Chemistry of

Advances in Heterocyclic Chemistry

Synthesis of Chiral Non Racemic Azetidines

Harnessing the Ortho-Directing Ability of the Azetidine Ring for the Regioselective and Exhaustive Functionalization of Arenes

Regioselective Functionalization of 2-Arylazetidines: Evaluating the Ortho-Directing Ability of the Azetidinyl Ring and the α-Directing Ability of the N-Substituent

Recent Advances in the Chemistry of Metallated Azetidines

Diastereoselective Preparation of Azetidines and Pyrrolidines

Regiodivergent Stereoselective Access to Fused Alkylideneazetidines

Direct Alkylation of 1-Azabicyclo

Synthesis and Homologation of an Azetidin-2-Yl Boronic Ester with α-Lithioalkyl Triisopropylbenzoates

The Discovery of Ezetimibe: A View from Outside the Receptor

Synthesis and in Vitro Evaluation of Inhibitors of Intestinal Cholesterol Absorption

Carbohydrate Sulfonyl Chlorides for Simple, Convenient Access to Glycoconjugates

Bioorganic & Medicinal Chemistry Letters T-Type Calcium Channel Blockers: Spiro-Piperidine Azetidines and Azetidinones  Optimization, Design and Synthesis

Azetidine-Borane Complexes: Synthesis, Reactivity, and Stereoselective Functionalization

A General Approach to Stereospecific Cross-Coupling Reactions of Nitrogen-Containing Stereocenters

Intermolecular Sp 3 -C−H Amination for the Synthesis of Saturated Azacycles

Preparation through Anionic Ring Closure

Novel Stereoselective Synthesis of 1,2,3-Trisubstituted Azetidines

Rules for Ring Closure

The Baldwin Rules: Revised and Extended

Baldwin-Type Rules for Metal-Controlled Intramolecular Migratory Insertions. A Computational Study of Ni, Pd, and Pt Case

Cyclizations of Alkynes: Revisiting Baldwin' s Rules for Ring Closure

Useful Base Promoted Elaborations of Oxiranyl Ethers

1993, 58, 718−731. (62) Unkelbach, C.; Rosenbaum, H. S.; Strohmann, C. Direct Benzylic Metalation of a Phenethylamine Derivative: Potassium as the Key to Both Generation and Stabilization of a "Labile Anion

Chemoselective Strategy for the Direct Formation of Tetrahydro-2,5-Methanobenzo[c]Azepines or Azetotetrahydroisoquinolines via Regio-and Stereoselective Reactions

The M06 Suite of Density Functionals for Main Group Thermochemistry, Thermochemical Kinetics, Noncovalent Interactions, Excited States, and Transition Elements: Two New Functionals and Systematic Testing of Four M06-Class Functionals and 12 Other Function

Quantum Mechanical Continuum Solvation Models

Modeling Rate-Controlling Solvent Effects. The Pericyclic Meisenheimer Rearrangement of N-Propargylmorpholine N-Oxide

Stereo and Electronic Effects in the Rhodium(II)-Mediated Synthesis of Polycyclic Lactones and Lactams from.Alpha.-Diazo Ester and Amide Precursors

This research paper is dedicated to the memory of Professor Sir Jack Edward Baldwin, who pioneered the selectivity of the ring-closure reactions of alicyclic compounds.