key: cord-0887846-8w9w3ru9
authors: Abdellattif, Magda H.; Abdel-Rahman, Adel A. H.; Arief, Mohamed Mohamed Helmy; Mouneir, Samar M.; Ali, Amena; Hussien, Mostafa A.; Okasha, Rawda M.; Afifi, Tarek H.; Hagar, Mohamed
title: Novel 2-Hydroselenonicotinonitriles and Selenopheno[2, 3-b]pyridines: Efficient Synthesis, Molecular Docking-DFT Modeling, and Antimicrobial Assessment
date: 2021-05-10
journal: Front Chem
DOI: 10.3389/fchem.2021.672503
sha: 23a49e2d056bb4a82e76d7689f391638e49547e7
doc_id: 887846
cord_uid: 8w9w3ru9

Selenium containing heterocyclic compounds gained great interest as bioactive molecules as of late. This report explores the design, synthesis, characterization, and antimicrobial screening of new pyridine derivatives endowed with selenium moieties. A one-pot multicomponent system with a solvent-free, microwave irradiation environment was employed to afford this series. The spectroscopic techniques were exploited to verify the structures of the synthesized derivatives. Additionally, the agar diffusion method was employed to determine the antimicrobial activity of all the desired compounds. Of all the synthesized molecules, 9b, 12b, 14f, and 16d exhibited well to remarkable antibacterial and antifungal activities. Moreover, derivative 14f demonstrated the most potent antibacterial and antifungal performance. The results were also supported by molecular docking studies, utilizing the MOE (molecular operating environment) which revealed the best binding mode with the highest energy interaction within the binding pocket. Lastly, theoretical DFT calculations were carried out in a gas phase at B3LYP 6-311G (d,p) basis set to predict the molecular geometries and chemical reactivity descriptors. DFT results have been used to illustrate that molecular docking findings and biological activity assessments.

Microbial infection is one of the serious threats to human lives and causes major global public health issues. In the current scenario, there is a steady rise in the incidences of infectious diseases due to the rapid resistance of microbial strains to existing antimicrobial agents (Abdellattif, 2016; Al-Blewi et al., 2018; Fonkui et al., 2019) . Thus, exploration of more selective, potent and less toxic antimicrobial agents has become a challenging task for researchers. Therefore, pyridone and its derivatives have attracted a great deal of interest due to their promising pharmacological activities such as antibacterial, antifungal (Fassihi et al., 2009 ); anti-HIV (Parreira et al., 2001) ; antitumor (Hasvold et al., 2003) ; anti-hepatitis B (Lv et al., 2010) ; anaplastic lymphoma kinase inhibitors (Li et al., 2006) ; antituberculotic agents (Ng et al., 2015) ; and anti Pim-1 kinase activities (Fujita et al., 2005; Cheney et al., 2007) .

2-Pyridones are multifaceted compounds that are present in numerous bioactive natural products and pharmaceutical compounds (Gorobets et al., 2004; Mijin et al., 2014) . Despite the availability of several conventional methods to synthesize pyridone derivatives or its use, solvent-free and environmentally safe green approaches are highly demanded as influential procedures from both the economical and synthetic point of view (Burger et al., 2002; Wathey et al., 2002; Kappe et al., 2008; Grundas, 2011; Mijin et al., 2014; Helmy et al., 2015; Poudel et al., 2015; Abdellattif et al., 2017; Hagar et al., 2020b) . Pyridone derivatives also emerged as valuable building blocks for the synthesis of bioactive natural products as well as a versatile synthon for the synthesis of diverse nitrogen-containing heterocyclic compounds like β-lactams, indolizidine alkaloid, quinolizidines, and piperidines (Burger et al., 2002; Potewar et al., 2008) .

In the recent years, selenium compounds have gained substantial interest not only for their importance in synthetic chemistry but also for their biological properties (Burling and Goldstein, 1992; Lobinski et al., 2000; Koketsu et al., 2002; Abdel-Hafez, 2008; Potewar et al., 2008; Abdel-Lattif et al., 2014; Al-Rubaie et al., 2014) . Furthermore, the incorporation of selenium functionalities into organic scaffolds reported to permit alteration of their chemical and biological activities (Al-Smadi and Al-Momani, 2008) . Many studies described the antimicrobial activity of selenium containing compounds specifically against several strains of bacteria causing nosocomial infections or forming biofilm, such as Escherichia coli and Staphylococcus aureus . Moreover, selenium containing heterocyclic compounds are well-known for their antibacterial, antifungal, antiviral, antioxidant, antiinflammatory, antileishmanial, and antimutagenic properties (Leyck and Parnham, 1990; Tapiero et al., 2003; Al-Smadi and Al-Momani, 2008; Maslat et al., 2010; Díaz et al., 2019; Spengler et al., 2019) .

Based on the aforementioned facts and as an extension of our studies, a new synthetic approach has been developed for the synthesis of pyridine derivatives by incorporating selenium in its nucleus, employing a green microwave irradiation method. In the present study, 2-hydroselenonicotinonitrile and selenopheno [2, 3-b] pyridine derivatives were designed, synthesized, and explored for their antibacterial and antifungal activities. On the other hand, the advancement of computerbased technologies has progressively allowed simulating the dynamic nature of the binding event. Molecular docking is an attractive component of the drug discovery to recognize drug biomolecular interactions for the rational drug design. Therefore, molecular docking simulation was also performed for the newly synthesized compounds to find the potential binding mode and interaction energy. Figure 1 illustrates the rational study of selected selenium containing compounds with demonstrated medicinal performance. Case in point, Abselen (A) is a renowned drug with antioxidant and anti-inflammatory features that is being employed in the treatment for bipolar disorder (Singh et al., 2013) , hearing loss (Kil et al., 2007) , and reperfusion injury (Yamaguchi et al., 1998; Parnham and Sies, 2000) . Moreover, this molecule recently displayed a promising inhibition effect toward COVID-19 (Ewelina et al., 2021) . Selenium derivative (B) has been established as an anticancer agent, particularly for the tongue and prostate adenocarcinoma (Xing et al., 2008) . In addition, other selenium molecules have been employed as efficient antithyroid drugs in comparison with their sulfur analogs, compounds (C-F), Figure 1 (Roy and Mugesh, 2008) .

The starting materials, 1a-c and 2d-f, demonstrated in Figure 2 , were synthesized as previously reported in literature (Abdellattif et al., 2017) . Utilizing these precursors instigated the synthetic strategy to obtain the title compounds 8ac, 9a-c, 10a-c, 12a-c, 14d-f, and 16d in excellent yield. The synthetic reaction sequence of the new molecules is delineated in Schemes 1-3. The structural identity of the synthesized compounds was confirmed utilizing the spectral data (IR, 1 H NMR, 13 C NMR, and mass) and the elemental analysis, which were in full harmony with the described structures. The desired compounds were obtained in excellent yields ranging from 89 to 94% after recrystallization with ethanol/dimethylformamide (DMF).

In general, the IR spectra displayed peaks at around 3,500-3,550 (OH, hydroxyl), 3,210-3,235 (N-H), 3,300, 3,400 (NH 2 ), 2,970-3,048 (ArH), 2,850-2,910 (CH 2 ), 1,650-1,720 (C=O), and 2,220-2,250 (C-N). All the respective protons of the 1 H NMR spectra of the newly synthesized compounds were confirmed in accordance with their chemical shifts (δ) and multiplicities. The synthesized compounds exhibited singlets around δ 1.70-2.04 ppm, 4.32 and 5.1-5.4 ppm, which could be accounted for the methyl, hydroxyl, and amine protons, respectively. Meanwhile, the aromatic protons resonated in the range of δ 6.45-7.8, whereas the thienyl protons appeared in the 7.3-7.5 ppm. The 13 C NMR spectra showed carbon signals corresponding to pyridone derivatives and aromatic rings. For instance, the 13 C NMR spectra displayed peaks at δ 206-169 ppm for the carbonyl group, δ 125-135 ppm for the thienyl carbon, δ 89-143 ppm for the indenyl carbon, δ 217 ppm for CF 3 , 116-118 for C-N, and δ 83-166 ppm for the aromatic carbon. The peaks of the mass spectra (ESI-MS) appeared at definite m/z value according to the molecular formula of the compounds. The results of elemental analysis were within ±0.4% deviation as compared to the theoretical values for each element analyzed (C, H, N, and S) .

An in-depth, detailed explanation of the newly synthesized molecules' characterization is presented in the experimental segment. 

The theoretical DFT stimulation was achieved in a gas phase at B3LYP 6-311G (d,p) basis set implemented into the Gaussian 9. This included the prediction of the geometrical optimization on each prepared compound to determine the minimum energy molecular structure, followed by the frequency calculation at the optimum geometrical structural during which many thermochemical parameters were also calculated. All optimized geometrical structures of the investigated compounds are proved to be stable due to the absence of the imaginary frequency. The results of the DFT theoretical calculations revealed that all the compounds are not planar, as illustrated in Figure 3 .

In-vitro Antibacterial Activity

The synthesized compounds were screened to determine their in vitro antibacterial activity against gram positive bacteria (Staphylococcus aureus, Streptococcus pyogenes) and gram-negative bacterial strains (Escherichia coli, Pseudomonas aeruginosa) by agar diffusion method with different concentrations of the seleno-pyridones derivatives, as shown in Table 1 . Ciprofloxacin and gentamicin were used as reference standard drugs (81 and 86% inhibition, respectively). All the tested synthetic compounds manifested moderate to excellent antibacterial activity against the bacterial strains. In general, as the concentration of seleno-pyridones molecules increases, the antibacterial activity also increases. Study results disclosed that compounds 9b, 12b, 14e, 14f, and 16d at 400 µm/ml concentration showed moderate activity toward S. aureus with 53.8, 54.3, 58.5, 58.9, and 57.8% inhibition, whereas 9b, 12b, 14e, 14f, and 16d exhibited modest activity against S. pyogenes with 52.6, 54.6, 61.3, 64.5, and 60.6% inhibition, respectively. Furthermore, synthesized compounds revealed maximum activity against E. coli and P. aeruginosa. Among the tested compounds, 9b, 12b, 14e, 14f, and 16d at 400 µm/ml concentration were the most effective against E. coli with 72,4, 76.6, 70.3, 78.4, 71.6% inhibition, respectively. Likewise, compounds 9b, 12b, 14e, 14f, and 16d exhibited remarkable activity against P. aeruginosa with 72. 8, 78.4, 72.6, 77.4, 74 .7% inhibition, respectively. This indicates the potential impact of the new selanone series against the tested bacterial strains.

Similarly, an in vitro assay of selenopyridones were performed to appraise their antifungal activity against Candida albicans, Aspergillus niger, and Aspergillus clavatus using agar diffusion method, where Griseofulvin was utilized as a reference drug. The obtaining activity performance is given in Table 2 , and it is apparent that the maximum antifungal influence was achieved using higher concentrations of the tested compounds. Case in SCHEME 1 | Synthesis of selenopheno[2, 3-b]pyridines (4-12a-c). point, compounds 9b, 12b, 14f, and 16d, 400 µm/ml, manifested prominent activity against C. albicans with 77.1, 72.1, 78.1, and 78.6% inhibition, respectively. Meanwhile, compounds 9b, 12b, 14e, 14f, and 16d displayed excellent activity against A. niger with 71. 1, 72.4, 70.1, 77.4, and 71 .3% inhibition, respectively. Moreover, compounds 9b, 12b, 14e, 14f, and 16d were found to have a notable impact against A. clavatus with inhibition percentage of 68.5, 68.4, 63.9, 74.3, and 68 .3, respectively.

The docking studies against 1kzn were subjected to our selenium compound and the well-known antibacterial drug "gentamicin." The 1kzn is a code for the 24 kDa gyrase fragment; DNA gyrase is a main protein involving in replication and transcription of bacterial circular DNA. Many antibacterial drugs are known to target DNA gyrase, inducing bacterial death (Lafitte et al., 2002) . In term of the docking study, our compound divided into two groups: Group (A) [9b, 12b, 14e, 14f, and 16d] which have high antibacterial activity and have score varies from (−6.47 to −7.41) which is reasonably less than the score achieved by the gentamicin (−8.79). Group (B) [8b, 10b, 12a, 12c, and 14d] which have moderate antibacterial activity and have score varies from (−5.87 to 6.55).

As apparent from the docking studies, Tables 3-5 and Figures 4, 5, all selenium compounds interact almost in the same site in the protein and hence our compound is expected to have antibacterial effect close from that seen by the gentamicin which is in agreement of what we observed in the experimental data.

The predicted pharmacokinetic/Molinspiration properties (Lipinski et al., 1997; Molinspiration, 2011; Singh et al., 2017) of the new series, 8b, 9b, 10b, 12a-c, 14d-f, and 16d are given in Tables 6, 7. With the help of Molinspiration virtual screening, most of the synthesized compounds showed promising bioactivity as implied from docking parameters in Tables 6, 7, which indicates the drug likeness properties against kinase inhibitor, protease and enzyme inhibitors. On the other hand, compounds 8b, 10b, and 12b-c showed no activity since the activities were out the overlapped area between the enzyme inhibitors and drug-likeness molecules.

Interestingly, the computational investigation by DFT is an excellent tool in designing of new materials and attracts attentions of many researchers in recent reports in illustration of the biological activities (Hagar et al., 2020a; Almehmadi et al., 2021; Mohammed et al., 2021; Parveen et al., 2021) . Recently, the frontier orbitals, the highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO) and SCHEME 2 | Synthesis of hydroselenonicotinonitrile 14d-f. SCHEME 3 | Synthesis of selenopheno[2, 3-b]pyridine derivative 16d. their energy gaps have been used to prove numerous chemical reactivity forms of the biological characters. Moreover, several biological activities such as antifungal (Joshi et al., 2018 (Joshi et al., , 2020 , anticancer (Kumar et al., 2018; Hagar et al., 2019; Khodair et al., 2020) , antimicrobial (Grover et al., 2000; Malhotra et al., 2017; Kumer et al., 2019) , cytotoxic (Aljuhani et al., 2018; Da Costa et al., 2018; Rachedi et al., 2019) activities and a new-drugdesign field (Lewis, 2003) could be investigated in terms of the relationship with the energy of the FMOs.

Diverse important factors, such as the potential of the electronic ionization (I = -E HOMO ) and the electron affinity of the LUMO (A = -E LUMO ) could be estimated from the FMOs. Furthermore, the FMOs is an excellent tool to appraise various chemical reactivity descriptors, such as softness (δ), global hardness (η), electronegativity (χ) (an indicator for the electronic acceptance ability of the compound i.e., Lewis acidity), and electrophilicity (ω) (an appraisal for the lower energy of electronic transition), which could be calculated as followed (Ortega et al., 2020) and shown in Table 8 .

Recently, the energy level and the energy gap of the frontier molecular orbitals (HOMO and LUMO) were reported to influence the binding affinity of the compounds and to direct the interactive mode with the receptor proteins. The calculated ground state isodensity surface plots of the FMOs energy levels and the energy gap of selenopheno[2, 3b]pyridines (8b, 9d, and 10b) are illustrated in Figure 6 . It is clear that the energy levels and the energy gap of the FMOs for these compounds have no significant effect to the attached substituent of the selenopheno ring. This result could be attributed to the lack of extra conjugation with the attached groups. However, the lower energy gap of 9d in comparison with the others could illustrate its lower binding energy.

The comparison of the FMO levels of the prepared compounds 12a-c of the attached aromatic rings to the pyridine moiety is a good explanation for the higher appraisal molecular docking score of compound 12c with respect to the other compounds. The high lying HOMO of 12c permits a higher ability to donate electrons to the receptors either in the anticancer or antimicrobial cell/protein. The high lyophobicity of 12b along with the affected chemical descriptors, higher softness δ = 0.60, higher basicity χ = 3.88 as well as higher ω = 3.88 along with the level and the gap of the FMOs is an illustration of the molecular docking results as well as its biological activity, Figure 7 .

Similarly, the FOMs energy levels and their energy difference of hydroselenonicotinonitrile 14d-e were also calculated. It is obvious from Figure 8 that compound 14e with benzenesulfonic acid moiety has a lower energy gap than that of other derivatives. However, the lower hydrophobicity, higher topological polar surface area, lower dipole moment, high H-bonding acceptor and donor, and in-silico absorption percentage of 14f explicates its highest biological activity.

To verify the evidence regarding the investigated reactivity of the compounds as enzyme inhibitors, the molecular electrostatic potential (MEP) is an important parameter to be predicted. Since the MEP defines the molecular size and shape of the positive, negative, and the neutral electrostatic potentials, the MEP can be an indicator for expecting physiochemical property relationships with the molecular structure. Furthermore, the molecular electrostatic potential is a useful tool in the prediction of the susceptibility of the studied compounds toward electrophiles and nucleophiles.

The molecular electrostatic potential was calculated by the same method under the same base sets and given in Figure 9 . In the MEP, the higher negative region is the favored sites for electrophilic attack demonstrated in the red color, Figure 3 . An electrophile attack is attracted to the negatively charged sites and vice versa for the blue regions. Additionally, it is evident that the molecular size, shape, and orientation of the negative, positive and neutral electrostatic potential are varied according to the electronic nature of the compounds as well as the electronegativity of their attached groups. The difference in the electrostatic potential mapping of the compounds could be the reasoning behind the extent of the binding affinity of the studied compounds to activate the receptor's sites. The colored provided reflects the strength of binding between compounds and protein.

Frontiers in Chemistry | www.frontiersin.org DPX-400MHz was used to record the 1 H NMR and 13 C NMR spectra. Chemical shift (δ) values were stated in parts per million (ppm) using internal standard tetramethylsilane. The D 2 O exchange confirmed the exchangeable protons (OH and NH). LC-MS/MS (PerkinElmer) was used to record the mass spectra, presented as m/z. Elemental analyses were achieved by using PerkinElmer 240 analyzer. The purity of synthesized compounds as well as progress of reaction were assessed by ascending thin layer chromatography (TLC) (silica gel G) by using methanol/chloroform (9:1 v/v) and methylene chloride/chloroform (4:1 v/v) combination as solvent system.

General Procedure for the Synthesis of 2-seleno-4,6-disubstitutednicotinonitrile Derivatives (4a-c)

A solution of 3-Cyano-2(1H)-pyridones (1a-c) (10 mmol), and phosphrous oxychloride (POCl 3 ) (30 mmol), was irradiated with microwave for 7 min, then NaSeH (1 g, 12 mmol) were mixed with the resulting solution in a HP-500 Plus process vessel. The process vessel was capped properly and exposed by microwaves under suitable pressurized conditions (17.2 bar, 220 • C) for 3-5 min. After irradiation, reaction mixture was cooled and added in crushed ice. The mixture was sonicated for 1 h and filtered in a sintered glass followed by solvent evaporation in vacuo, and the resultant product was recrystallized from mixture of EtOH/DMF to afford (Scheme 1) (4a-c).

General Procedure for the Synthesis of Selenium Derivatives 11a-c, 12a-c, 5b, 6b, 7b, 8b, 9b, and 10b

i. A mixture of 4(a-c) (10 mmol), chloroacetone (10 mmol) and sodium acetate (10 mol) was charged in a process vessel (HP-500 Plus) for 3-5 min. The vessel was capped properly and irradiated by microwaves under suitable pressurized conditions (18 bar, 250 • C). The reaction mixture was cooled in iced water/ethanol (100 ml) and recrystallized from ethanol to give compounds 11(a-c). Furthermore, compound 11(a-c) (10 mmol) was mixed with ethanol and sodium acetate and then charged in a process vessel (HP-500 Plus) under the same conditions as mentioned above to give compounds 12(a-c). ii. Mixture of ClCH 2 X and sodium acetate 10 (mmol) was processed by the same method as mentioned in section General Procedure for the Synthesis of 2-Seleno-4,6-Disubstitutednicotinonitrile Derivatives (Scheme 1) (4a-c) to give compounds 5(b), 6(b), and 7(b), where X was CN, COOEt and CONH 2 , respectively. iii. Compounds 5(b), 6(b), and 7(b) were refluxed in glacial acetic acid and/or irradiated with microwave for 2 min to give compounds 8(b), 9(b), and 10(b), respectively.

Derivatives 14d-f

Compounds (14d-f) were synthesized by adopting same procedure as given in section General Procedure for the Synthesis of 2-Seleno-4,6-Disubstitutednicotinonitrile Derivatives (Scheme 1) (4a-c) by taking (1d-f) as starting material.

A mixture of 14(d) (10 mmol), ClCH 2 COOEt and sodium acetate 10 (mmol) was treated by same procedure as mentioned in section General Procedure for the Synthesis of Selenium Derivatives 11a-c, 12a-c, 5b, 6b, 7b, 8b, 9b, and 10b (i) to give compound 15(d). Furthermore, compound 15(d) reacted with glacial acetic acid (2 ml) and microwaved for 2 min to give compound 16(d), purified and recrystallized from pure ethanol. [M+H] + . Anal. calcd. for C 14 H 9 F 3 N 2 OSSe: C: 43.20, H: 2.33, N: 7.20, F: 14.64, S: 8.24, Se: 20.28; Found: C: 43.16, H: 2.33, N: 7.21, F: 14.62, S: 8.24% . : 58.37, H: 4.29, N: 8.51, Se: 23.98; Found: C: 58.28, H: 4.29, N: 8.50% . H: 1.62, N: 11.29, F: 15.31, S: 8.61, Se: 21.21; Found: C: 42.0, H: 1.62, N: 11.30, F: 15.30, S: 8.63 .

Solid, Dark brown; yield: 94%; m.p. ( • C): 647.6; IR (KBr) ν cm −1 : 3,200, 3,350 (NH 2 ); 1 H NMR (CDCl 3 ): (δ ppm) 0.6 (t, 3H, CH 3 ), 3.1 (q, 2H, CH2), 5.1 (s, 2H, NH 2 ), 7.5-7.6 (m, 3H, theinyl); 13 C NMR (CDCl 3 ): (δ ppm) 13.5 (s, C, CH 3 ), 60.8 (s, C, CH 2 ), 77.5 (t, CH 3 , CH 2 ), δ 77.5 (t, C, CF 3 ), 217-220 (m, C, CF 3 ), 151 (m, C2, Ar), 103 (s, C3, Ar), 217 (m, CF 3 ), 163 (s, C4, Ar), 92 (s, C5, Ar), 129 (s, C6, Ar), 125.3 (s, C2 thienyl), 127.1 (s, C3 thienyl), 125.2 (s, C4 thienyl), 135.4 (s, C5, thienyl), 106.2 (s, C2 indenyl), 139 (s, C3 indenyl), 174(s CO); ESI MS (m/z): 420.9 [M+H] + . Anal. calcd. for C 15 H 11 F 3 N 2 O 2 SSe: C: 42.97, H: 2.64, N: 6.68, F: 13.59, S: 7.65, Se: 18.83; Found: C: 42.90, H: 2.64, N: 6.66, F: 13.55, S: 7.64 . Hz, 1H), 7.11-7.05 (m, 1H), 6.85-6.78 (m, 1H), 6.70-6.64 (m, 2H), 5.78 (s, 2H), 5.73 (s, 1H), 2.53 (s, 3H), 2.45 (q, J = 8.0 Hz, 2H), 2.34 (s, 3H), 1.14 (t, J = 8.0 Hz, 3H). 13 C NMR (CDCl 3 ): (δ ppm) δ 173. 13, 159.00, 155.54, 143.31, 139.55, 137.11, 133.35, 131.48, 129.04, 128.72, 127.70, 125.96, 125.94, 123.43, 117.02, 113.60, 27.47, 23.03, 19.05, 16.44, 8.84 

The selenopheno[2,3-b]pyridine derivatives were screened for their antimicrobial performance against Gram positive (S2014-Staphylococcus aureus, S5265 Streptococcus pyogenes), Gram negative (Escherichia coli K12, Pseudomonas aeruginosa NACRES NA.24) bacterial strains, and for their antifungal activity (Candida albicans, VT000542, Aspergillus niger RMF02275L, Aspergillus clavatus, RMF02275L). The investigation was carried out by the agar diffusion method with slight modification (Matar et al., 2003; Moustafa, 2005) . The tested selenopheno[2,3b]pyridine derivatives were added directly to the culture media, and the percentage growth inhibition was assessed after 3 days. The selenopheno[2,3-b]pyridine derivatives were prepared in DMSO in concentration of 400 µg/ml and sterilized by filtration through 0.22 µm sterilizing Millipore express filter. Negative controls were prepared using only DMSO. Ciprofloxacin, gentamicin and griseofulvin were used as reference standards to determine the sensitivity of Gram-positive, Gram-negative bacterial and fungal strains, respectively. The inoculated plates were incubated at 37 • C for 3 days. The growth inhibition percentage was estimated using the following equation:

Where d1 is the diameter of the bacterial colony (mm) in the negative control plates after 3 days, and d2 is the diameter of the colony (mm) of the treated plates after the same period.

The crystal structures of the proteins identified for Escherichia Coli (1kzn) were obtained from the protein data bank. Water molecules around the duplex were removed, and hydrogen atoms were added. The parameters and charges were allocated with MMFF94x force field. After alpha-site spheres were generated using the site finder module of MOE, our compound was docked in the active site, using the DOCK module of MOE. The Dock scoring in MOE software was calculated by London dG scoring function and was refined using two different methods. The planarity of the system was maintained, and the best poses were analyzed for the best score (Lafitte et al., 2002; Abdellattif et al., 2020; Almehmadi et al., 2020; Hosny et al., 2020; Hussein et al., 2020; Hussien and Abdelaziz, 2020) .

A computational study of selenium compounds was performed for prediction of ADME properties by QikProp3.2 tool available in Schrödinger 9.0 version (USA) and Molinspiration online property calculation toolkit to get an idea whether the compound has optimum pharmacokinetic properties to enter higher phases of the drug development process or not. Molinspiration strategy may be described as a complex balance of various molecular properties and structural features which conclude whether the appropriate molecule is related to the known drugs. These properties, mainly hydrophobicity, electronic distribution, hydrogen bonding characteristics, molecule size and flexibility, and of course presence of various pharmacophoric features affect the performance of molecule in a living organism, including bioavailability, transport properties, affinity to proteins, reactivity, toxicity, metabolic stability, and many others. The diversity of potential drug targets (of which each needs a different combination of matching molecular characteristics) is so enormous, that it is possible to find a common denominator for all of them and to express molecule drug-likeness by a single "magic number." Simple count criteria (like limits for molecular weight, log P, or the number of hydrogen bond donors or acceptors) have also relatively limited applicability and are useful only to discard obvious non-drugs.

Molinspiration strategy which leads to success is not only a universal drug-likeness score but also focuses on particular drug classes and the development of specific activity scores for each of these classes. The method uses sophisticated Bayesian statistics to compare structures of typical ligands active on the particular target with structures of inactive molecules and to identify substructure characteristics (which in turn determine physicochemical properties) representative for active molecules (Lipinski et al., 1997; Ertl et al., 2000; Veber et al., 2002) .

The designed seleno-pyridine derivatives were efficiently synthesized in satisfactory yields under the stated reaction conditions through the exploitation of the microwave assisted green synthesis and screened for their antibacterial and antifungal potential. The study results revealed that selected compounds exhibited good-to-significant activity. Among these, compound 14f was found to be the most potent antibacterial agent as well as a good antifungal agent, which could serve as the lead compound. Furthermore, compound 14f displayed the highest energy interaction within the binding pocket in the molecular docking study. In sight of these facts, compound 14f could be the focus of further investigations for potential antimicrobial agents and sustenance for the design of new molecules. Finally, the DFT calculations were conducted to the molecular docking and the antimicrobial activity to give a complete investigation in terms of the chemical reactivity descriptors. The data revealed that the lower hydrophobicity, higher topological polar surface area, lower dipole moment, high H-bonding acceptor and donor, and in-silico absorption percentage of 14f explicates its highest biological activity.

The original contributions presented in the study are included in the article/Supplementary Material, further inquiries can be directed to the corresponding authors.

MMHA suggested the idea and interpret spectroscopic data. MHA interpreted the results obtained from docking, performed the chemistry of the article, writing the draft, and validate the article. AAHA-R performed the arrangement of the manuscript and wrote the final form. AA performed English editing and validate the article. SM performed biological investigation. MAH performed chemistry and molecular docking studies. RO performed chemistry, edited English language, and discussed the results and commented on the manuscript. MH performed theoretical chemistry, calculations, and discussed the results. Finally, TA analyzed the data, edited English language, and discussed the results and commented on the manuscript. All authors contributed to the article and approved the submitted version.

Selenium containing heterocycles: synthesis, antiinflammatory, analgesic and anti-microbial activities of some new 4-cyanopyridazine-3 (2H) selenone derivatives

Synthesis of some novel compounds of saccharinyl acetic acid containing nucleus and evaluation of their biological activities as antimicrobial

A onepot synthesis of novel derivatives of oxadiazine-4-thione, and its antibacterial activity, and molecular modeling studies

Green Synthesis of Novel 5-Arylazo-2-[(2S, 3S, 4R, 5R)-3, 4, 5-Trihydroxy-6-(Hydroxymethyl) Tetrahydro-2H-Pyran-2-Yloxy]-4, 6-Dimethyl 3-Nicotinonitrile

Synthesis, reactions and pharmacological studies of new series of selenolo [2, 3-b] tetrahydroquinoline

Design, synthesis, ADME prediction and pharmacological evaluation of novel benzimidazole-1, 2, 3-triazolesulfonamide hybrids as antimicrobial and antiproliferative agents

Microwave-assisted synthesis of novel imidazolium, pyridinium and pyridazinium-based ionic liquids and/or salts and prediction of physicochemical properties for their toxicity and antibacterial activity

Design, synthesis, DNA binding, modeling, anticancer studies and DFT calculations of Schiff bases tethering benzothiazole-1, 2, 3-triazole conjugates

The role of the arylidene linkage on the antimicrobial enhancement of new tert-butylcyclohexanone-based polyketones

Synthesis, characterization and antibacterial activity of some new ferrocenyl selenazoles and 3, 5-diferrocenyl-1, 2, 4-selenadiazole

Synthesis, characterization and antimicrobial activity of new 1, 2, 3-selenadiazoles

2-pyridones as a new photochemically stable structural design for the off-resonant optical kerr effect

Computational studies of nonbonded sulfur-oxygen and selenium-oxygen interactions in the thiazole and selenazole nucleosides

Identification and structure-activity relationships of substituted pyridones as inhibitors of Pim-1 kinase

In vitro cytotoxicity and structureactivity relationship approaches of ent-kaurenoic acid derivatives against human breast carcinoma cell line

NOVEL UREA, thiourea and selenourea derivatives of diselenides: synthesis and leishmanicidal activity

Fast calculation of molecular polar surface area as a sum of fragment-based contributions and its application to the prediction of drug transport properties

Identification of ebselen and its analogues as potent covalent inhibitors of papain-like protease from SARS-CoV-2

Synthesis, antimicrobial evaluation and QSAR study of some 3-hydroxypyridine-4-one and 3-hydroxypyran-4-one derivatives

Benzimidazole Schiff base derivatives: synthesis, characterization and antimicrobial activity

Biosynthetic studies on the antibiotics PF1140: a novel pathway for a 2-pyridone framework

Rapid microwave-assisted solution phase synthesis of substituted 2-pyridone libraries

Quantitative structureproperty relationships in pharmaceutical research-Part 1

Advances in Induction and Microwave Heating of Mineral and Organic Materials

Mesophase behavior and DFT conformational analysis of new symmetrical diester chalcone liquid crystals

Investigation of some antiviral N-heterocycles as COVID 19 drug: molecular docking and DFT calculations

Nalkyl 2-pyridone versus O-alkyl 2-pyridol: ultrasonic synthesis, DFT, docking studies and their antimicrobial evaluation

Pyridone-containing farnesyltransferase inhibitors: synthesis and biological evaluation

Microwave-assisted synthesis of new series some acetyl coumarin derivatives and studying of some their pharmacological activities

Synthesis, spectral, modeling, docking and cytotoxicity studies on 2-(2-aminobenzoyl)-N-ethylhydrazine-1-carbothioamide and its divalent metal complexes

Novel biologically active polyurea derivatives and its TiO2-doped nanocomposites

Molecular docking suggests repurposing of brincidofovir as a potential drug targeting SARS-CoV-2 ACE2 receptor and main protease

IV) complexes of Schiff base derived from 1, 2, 4-triazole moiety: Synthesis, spectroscopic investigation, DFT studies, antifungal activity and molecular docking studies

Synthesis, spectroscopic characterization, DFT studies and antifungal activity of (E)-4-amino-5

Practical Microwave Synthesis for Organic Chemists: Strategies, Instruments, and Protocols

New Nribosides and N-mannosides of rhodanine derivatives with anticancer activity on leukemia cell line: Design, synthesis, DFT and molecular modelling studies

Ebselen treatment reduces noise induced hearing loss via the mimicry and induction of glutathione peroxidase

Inhibitory effects of 1, 3-selenazol-4-one derivatives on mushroom tyrosinase

Structural, spectral, theoretical and anticancer studies on new co-crystal of the drug 5-fluorouracil

The simulating study of HOMO, LUMO, thermo physical and quantitative structure of activity relationship (QSAR) of some anticancer active ionic liquids

DNA gyrase interaction with coumarin-based inhibitors: the role of the hydroxybenzoate isopentenyl moiety and the 5 '-methyl group of the noviose

Quantitative structure-activity relationships (QSARs) within the cytochrome P450 system: QSARs describing substrate binding, inhibition and induction of P450s

Acute antiinflammatory and gastric effects of the seleno-organic compound ebselen

Design and synthesis of 5-aryl-pyridone-carboxamides as inhibitors of anaplastic lymphoma kinase

Experimental and computational approaches to estimate solubility and permeability in drug discovery and development settings

Species-selective determination of selenium compounds in biological materials

Design, synthesis, and antihepatitis B virus activities of novel 2-pyridone derivatives

Synthesis, characterization, antimicrobial activities, and QSAR studies of organotin (IV) complexes. Phosphorus Sulfur Silicon Related Elements 192

Antimutagenic activities of two suspected anticarcinogenic bifunctional organoiron seleno-terephthalate derivatives

Correlation between E-test, disk diffusion, and microdilution methods for antifungal susceptibility testing of fluconazole and voriconazole

Microwave assisted synthesis of 2-pyridone and 2-pyridone based compounds

2-(alkylthio)-3-(naphthalen-1-yl) quinazolin-4 (3 H)-ones: ultrasonic synthesis, DFT and molecular docking aspects

Calculation of Molecular Properties and Bioactivity Score

Selenocompounds as novel antibacterial agents and bacterial efflux pump inhibitors

Synthesis and structural and biological activity studies on some lanthanide chelates with O-and N-containing ligands

Structure activity relationships of 4-hydroxy-2-pyridones: a novel class of antituberculosis agents

Unrevealing sequence and structural features of novel coronavirus using in silico approaches: the main protease as molecular target

Ebselen: prospective therapy for cerebral ischaemia

Conformational preferences of non-nucleoside HIV-1 reverse transcriptase inhibitors

Synthesis, docking and density functional theory approaches on 1, 3-Bis-3-(4-Chlorophenyl)-2, 3-dihydroquinazolin-4 (1H)-on-2-thioxopropane toward the discovery of dual kinase inhibitor

Synthesis of tryptanthrin and deoxyvasicinone by a regioselective lithiation-intramolecular electrophilic reaction approach

Eco-friendly synthesis of diverse and valuable 2-pyridones by catalyst-and solvent-free thermal multicomponent domino reaction

Synthesis, DFT and POM analyses of cytotoxicity activity of α-amidophosphonates derivatives: identification of potential antiviral O, O-pharmacophore site

Selenium analogues of anti-thyroid drugs

A safe lithium mimetic for bipolar disorder

Design, synthesis, chemical and biological evaluation of brain targeted alkylating agent using reversible redox prodrug approach

Antiviral, antimicrobial and antibiofilm activity of selenoesters and selenoanhydrides

The antioxidant role of selenium and seleno-compounds

Molecular properties that influence the oral bioavailability of drug candidates

The impact of microwave-assisted organic chemistry on drug discovery

The inhibitory effect of a novel organoselenium compound BBSKE on the tongue cancer Tca8113 in vitro and in vivo

Hajime yasuhara ebselen in acute ischemic stroke: a placebo-controlled. Double Blind Clin

The authors are very thankful for Taif University researcher supporting project Number TURSP/91, Taif University, Taif, Saudi Arabia.

The Supplementary Material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fchem.

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.Copyright © 2021 Abdellattif, Abdel-Rahman, Arief, Mouneir, Ali, Hussien, Okasha, Afifi and Hagar. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.