key: cord-0876118-vqen7ql0
authors: Ibrahim, Mahmoud A. A.; Abdelrahman, Alaa H. M.; Atia, Mohamed A. M.; Mohamed, Tarik A.; Moustafa, Mahmoud F.; Hakami, Abdulrahim R.; Khalifa, Shaden A. M.; Alhumaydhi, Fahad A.; Alrumaihi, Faris; Abidi, Syed Hani; Allemailem, Khaled S.; Efferth, Thomas; Soliman, Mahmoud E.; Paré, Paul W.; El-Seedi, Hesham R.; Hegazy, Mohamed-Elamir F.
title: Blue Biotechnology: Computational Screening of Sarcophyton Cembranoid Diterpenes for SARS-CoV-2 Main Protease Inhibition
date: 2021-07-13
journal: Mar Drugs
DOI: 10.3390/md19070391
sha: 6ffe6ab12d0c64be875a5228b87fd3e8ac194f14
doc_id: 876118
cord_uid: vqen7ql0

The coronavirus pandemic has affected more than 150 million people, while over 3.25 million people have died from the coronavirus disease 2019 (COVID-19). As there are no established therapies for COVID-19 treatment, drugs that inhibit viral replication are a promising target; specifically, the main protease (M(pro)) that process CoV-encoded polyproteins serves as an Achilles heel for assembly of replication-transcription machinery as well as down-stream viral replication. In the search for potential antiviral drugs that target M(pro), a series of cembranoid diterpenes from the biologically active soft-coral genus Sarcophyton have been examined as SARS-CoV-2 M(pro) inhibitors. Over 360 metabolites from the genus were screened using molecular docking calculations. Promising diterpenes were further characterized by molecular dynamics (MD) simulations based on molecular mechanics-generalized Born surface area (MM-GBSA) binding energy calculations. According to in silico calculations, five cembranoid diterpenes manifested adequate binding affinities as M(pro) inhibitors with ΔG(binding) < −33.0 kcal/mol. Binding energy and structural analyses of the most potent Sarcophyton inhibitor, bislatumlide A (340), was compared to darunavir, an HIV protease inhibitor that has been recently subjected to clinical-trial as an anti-COVID-19 drug. In silico analysis indicates that 340 has a higher binding affinity against M(pro) than darunavir with ΔG(binding) values of −43.8 and −34.8 kcal/mol, respectively throughout 100 ns MD simulations. Drug-likeness calculations revealed robust bioavailability and protein-protein interactions were identified for 340; biochemical signaling genes included ACE, MAPK14 and ESR1 as identified based on a STRING database. Pathway enrichment analysis combined with reactome mining revealed that 340 has the capability to re-modulate the p38 MAPK pathway hijacked by SARS-CoV-2 and antagonize injurious effects. These findings justify further in vivo and in vitro testing of 340 as an antiviral agent against SARS-CoV-2.

Coronavirus (CoV) belonging to the Coronaviridae family is one of the largest families of positive-sense, RNA viruses [1] . Based on genomic structure and phylogenetics, CoVs are subdivided into genera alpha through delta with the alpha-and beta-genera responsible for currently known diseases in humans [1] . Unlike subtypes of CoVs that cause mild clinical symptoms, SARS-CoV and MERS-CoV are associated with severe respiratory symptoms [2] . CoVs are recognized to cause infection in the respiratory, hepatic, enteric and neurological systems and pandemic conditions have ensued with high infection rates [3] . Since the World Health Organization (WHO) announced this new beta coronavirus in late 2019, cataloged as SARS-CoV-2 (COVID- 19) [4] , the organization has authorized several COVID-19 preparations for emergency use immunization including vaccines developed by Pfizer/BioNTech, Astrazeneca/Oxford, Serum Institute of India, Johnson & Johnson, Moderna and Sinopharm. Notwithstanding these advances in controlling the pandemic, with high viral transmission via respiratory droplets from coughing and/or sneezing [5] , there is still an urgency to developing effective antiviral drugs for COVID-19 treatment.

In screening for potential COVID-19 drug candidates, metabolite repurposing can be used as a starting point to identify metabolites that already have biological activity against some diseases or infections. Drug repurposing can be achieved by conducting systematic drug-drug target interaction and drug-drug interaction analyses [6] . Another approach is to examine a class or source of natural products with established biological activity; indeed, several in silico studies have been developed to screen for SARS-CoV-2 inhibitors as prospective anti-COVID-19 drug candidates [7] [8] [9] [10] [11] [12] [13] . Natural products play a pivotal role in designing novel and efficient treatments to conquer the current COVID-19 epidemic. Among natural products, alkaloids, flavonoids and terpenoids have enticed considerable attention as potential SARS-CoV-2 drug candidates [14] [15] [16] .

The basis of such studies is that the main protease (M pro ) that cleaves COVID-19 polyproteins is a point of vulnerability for viral replication. The crystal structure of SARS-CoV-2 main protease provides the basis for designing small molecules as inhibitors [17] . As a result, inhibitors can be screened for a suitable molecular structure to bind to the catalytic site of M pro and interrupt viral replication. Here, we examine cembranoids, a class of diterpenes isolated predominantly from the soft coral genus Sarcophyton that contain a considerable reservoir of bioactive natural products [18] . While screening for marine natural products with pharmacological activity of has led to the discovery of many potent bioactive metabolites [19] , the marine pharmacopeia is still a rich source of biological and chemical diversity [20] [21] [22] [23] .

In this Sarcophyton specific study, metabolites identified over the last two decades (1998-2019) [18] provided the original database for creating a Sarcophyton chemical library; a subset of those compounds were then virtual screened as M pro specific inhibitors. According to the anticipated docking scores, the most potent compounds were subjected to molecular dynamics (MD) simulations combined with binding energy calculations utilizing the molecular mechanics-generalized Born surface area (MM-GBSA) approach. The screen identified a promising anti-SARS-CoV-2 agent. Such in silico screening can provide promising inhibitor leads for subsequent in vitro and in vivo studies.

The unavailability of approved therapies towards COVID-19 disease indicates a crucial demand to systematically screen and recognize inhibitors that can suppress the SARS-CoV-2 infection and/or replication. M pro has an indispensable role in the viral reproduction in the host and is considered one of the most promising drug targets. In seeking small molecules to prohibit SARS-CoV-2 replication, molecular docking calculations and molecular dynamics (MD) simulations were applied to scrutinize the potency of a chemical library containing 363 diterpenes as prospective anti-COVID-19 inhibitor candidates.

The molecular docking technique was employed to anticipate the binding affinities for diterpenes towards M pro . The predicted docking scores of all investigated diterpenes metabolites are tabulated in Table S1 . What stands out in Table S1 is the wide range of binding affinities ranging from −4.3 to −10.4 kcal/mol. To evaluate the potency of the studied metabolites, docking scores were compared to darunavir, an antiretroviral therapy that has been clinically tested as a COVID-19 drug candidate [24] . Although darunavir has not shown anti-SARS-CoV-2 activity, darunavir exhibits promising binding affinity against M pro based on in silico studies [25] [26] [27] .

Interestingly, approximately 23% of the screened metabolites (i.e., 59 compounds) demonstrated higher binding affinity than that of darunavir with a docking score of −8.2 kcal/mol. 2D docking poses of those fifty-nine diterpenes with the key residues inside the M pro active site are presented in Figure S1 (Supplementary Materials). Most of the investigated metabolites displayed similar M pro binding modes inside the M pro 's binding pocket, exhibiting an essential hydrogen bond with GLU166, resulting in high binding affinities ( Figure S1 ). Estimated docking scores, 2D chemical structures, in addition to binding features for the top potent metabolites in complex with M pro are listed in Table 1 .

From the data in Table 1 , it is apparent that 363, 340, 347, 345 and 357 demonstrated solid binding affinities against M pro with docking scores in the range of -8.7 to -9.8 kcal/mol. High docking scores are ascribed to the capability of forming hydrogen bonds, van der Waals, hydrophobic and pi-based interactions with the fundamental amino acid residues within the M pro active site. Sarelengan B (363), separated from S. elegans, demonstrated the highest binding affinity of the diterpenes towards M pro with a docking score of −9.8 kcal/mol. Investigating the binding mode of 363 inside the M pro active site revealed that two carbonyl groups of (E)-cyclotetradec-9-ene-1,4,8-trione formed three hydrogen bonds with the imidazole ring backbone of HIS41, SH group of CYS145 and NH group of GLU166, with bond lengths of 2.01, 2.34 and 2.68 Å, respectively ( Figure 1 and Table 1 ). Additionally, a hydroxy group of 363 interacts with the backbone carbonyl group of GLU166 with a bond length of 2.35 Å (Figure 1 and Table 1) .

Bislatumlide A (340), separated from S. latum, manifested the second-highest binding affinity against M pro with a docking score of −9.6 kcal/mol. Investigating the binding mode of 340 towards the M pro showed that the methanol hydroxy group exhibits a hydrogen bond with the backbone NH of GLY143 with a bond length of 1.88 Å ( Figure 1 and Table 1 ). While the carbonyl group of dihydrofuranone shares a hydrogen bond with the backbone NH group of GLU166 with a bond length of 2.68 Å (Figure 1 and Table 1) .

It is worth noting that the five potent metabolites containing a cyclotetradecane-trione ring revealed the vital role of the chemical nucleus in the binding affinity of cembranoids with M pro . It is worth noting that the five potent metabolites containing a cyclotetradecane-trione ring revealed the vital role of the chemical nucleus in the binding affinity of cembranoids with M pro .

Darunavir demonstrated a satisfactory binding affinity (−8.2 kcal/mol), exhibiting three hydrogen bonds with LEU167 and GLU166 with bond lengths of 1.96, 2.88 and 1.94 Å, respectively ( Figure 1 and Table 1 ). More precisely, the NH2 of the aniline ring forms two hydrogen bonds with the carboxylate group of GLU166 and carbonyl group of LEU167 with bond lengths of 1.94 and 1.96 Å, respectively. Furthermore, the oxygen atom of the tetrahydrofuran ring exhibits a hydrogen bond with the backbone NH of GLU166 with a bond length of 2.88 Å. A docking comparison of darunavir with 363 and 340 disclosed promising binding affinities of the two metabolites as M pro inhibitors. Darunavir demonstrated a satisfactory binding affinity (−8.2 kcal/mol), exhibiting three hydrogen bonds with LEU167 and GLU166 with bond lengths of 1.96, 2.88 and 1.94 Å, respectively ( Figure 1 and Table 1 ). More precisely, the NH 2 of the aniline ring forms two hydrogen bonds with the carboxylate group of GLU166 and carbonyl group of LEU167 with bond lengths of 1.94 and 1.96 Å, respectively. Furthermore, the oxygen atom of the tetrahydrofuran ring exhibits a hydrogen bond with the backbone NH of GLU166 with a bond length of 2.88 Å. A docking comparison of darunavir with 363 and 340 disclosed promising binding affinities of the two metabolites as M pro inhibitors.

Molecular dynamics (MD) simulations provide structural details, stability of the ligand-enzyme complexes, conformational flexibilities and the reliability of ligand-enzyme binding affinities [28, 29] . The most potent diterpenes (59 compounds with docking scores <−8.2 kcal/mol) in complex with M pro were subjected to MD simulations and binding free energy calculations. To lessen the computational cost and time, the MD simulations were executed in the implicit water solvent for 250 ps in addition to the MM-GBSA approach was used to compute the corresponding binding free energies (see computational methodology section for details). The calculated MM-GBSA binding affinities for the selected metabolites are listed in Table S2 . As shown in Table S2 , five inhibitors demonstrated lower binding energies (∆G binding ) than that of darunavir (calc. −31.0 kcal/mol). Generally, the computed MM-GBSA binding energy values were lower than the corresponding docking scores, which might be ascribed to the different evaluation functions of the two employed methods. An over estimation of binding energy using a MM-GBSA approach can occur when not considering the contribution due to entropy [30, 31] . To gain more reliable binding affinities of diterpene metabolites in complex with M pro , those metabolites were further submitted to 10 ns MD simulations in an explicit water solvent. In addition, the corresponding binding energies were calculated ( Figure 2 ). 

Molecular dynamics (MD) simulations provide structural details, stability of the ligand-enzyme complexes, conformational flexibilities and the reliability of ligand-enzyme binding affinities [28, 29] . The most potent diterpenes (59 compounds with docking scores <−8.2 kcal/mol) in complex with M pro were subjected to MD simulations and binding free energy calculations. To lessen the computational cost and time, the MD simulations were executed in the implicit water solvent for 250 ps in addition to the MM-GBSA approach was used to compute the corresponding binding free energies (see computational methodology section for details). The calculated MM-GBSA binding affinities for the selected metabolites are listed in Table S2 . As shown in Table S2 , five inhibitors demonstrated lower binding energies (ΔGbinding) than that of darunavir (calc. −31.0 kcal/mol). Generally, the computed MM-GBSA binding energy values were lower than the corresponding docking scores, which might be ascribed to the different evaluation functions of the two employed methods. An over estimation of binding energy using a MM-GBSA approach can occur when not considering the contribution due to entropy [30, 31] . To gain more reliable binding affinities of diterpene metabolites in complex with M pro , those metabolites were further submitted to 10 ns MD simulations in an explicit water solvent. In addition, the corresponding binding energies were calculated ( Figure 2 ). What is interesting about the data in Figure 2 is that all investigated metabolites revealed lower binding energies (ΔGbinding) than that of darunavir (calc. −30.4 kcal/mol). Therefore, those potent metabolites were selected and subjected to 50 ns MD simulations in the explicit water solvent, followed by MM-GBSA binding energy calculations ( Figure  2 ). As shown in Figure 2 What is interesting about the data in Figure 2 is that all investigated metabolites revealed lower binding energies (∆G binding ) than that of darunavir (calc. −30.4 kcal/mol). Therefore, those potent metabolites were selected and subjected to 50 ns MD simulations in the explicit water solvent, followed by MM-GBSA binding energy calculations ( Figure 2 ). As shown in Figure 2 complexed with M pro was then elongated to 100 ns. In addition, the corresponding MM-GBSA binding energy was evaluated ( Figure 2) .

What is striking about Figure 2 is that there was no appreciable variation between the estimated MM-GBSA binding energy for 340 complexed with M pro over the 50 and 100 ns MD simulations. Comparing the binding affinities of 340 and darunavir, 340 demonstrated strong binding affinity throughout the 100 ns MD simulation against M pro with an average ∆G binding of −34.8 kcal/mol. The outstanding potency of 340 was attributed to its capability of exhibiting significant hydrogen bonds, hydrophobic, pi-based interactions and van der Waals interactions with the key amino acid residues within the M pro active site. The average structures for 340 and darunavir inside the active site throughout the 100 ns MD simulations are depicted in Figure 3 . The most exciting finding was that 340 preserved three hydrogen bonds with the fundamental amino acid residues of M pro throughout the 100 ns MD simulation ( Figure 3 ). Darunavir also showed satisfactory binding energy over the 100 ns MD simulation towards M pro with an average ∆G binding of −34.8 kcal/mol, exhibiting only two hydrogen bonds with the key amino acid residues of M pro (Figure 3 ). In conclusion, the MM-GBSA binding energy calculations displayed a remarkably higher binding affinity of 340 compared to darunavir. simulation for 340 complexed with M pro was then elongated to 100 ns. In addition, the corresponding MM-GBSA binding energy was evaluated ( Figure 2) .

What is striking about Figure 2 is that there was no appreciable variation between the estimated MM-GBSA binding energy for 340 complexed with M pro over the 50 and 100 ns MD simulations. Comparing the binding affinities of 340 and darunavir, 340 demonstrated strong binding affinity throughout the 100 ns MD simulation against M pro with an average ΔGbinding of −34.8 kcal/mol. The outstanding potency of 340 was attributed to its capability of exhibiting significant hydrogen bonds, hydrophobic, pi-based interactions and van der Waals interactions with the key amino acid residues within the M pro active site. The average structures for 340 and darunavir inside the active site throughout the 100 ns MD simulations are depicted in Figure 3 . The most exciting finding was that 340 preserved three hydrogen bonds with the fundamental amino acid residues of M pro throughout the 100 ns MD simulation (Figure 3 ). Darunavir also showed satisfactory binding energy over the 100 ns MD simulation towards M pro with an average ΔGbinding of −34.8 kcal/mol, exhibiting only two hydrogen bonds with the key amino acid residues of M pro (Figure 3 ). In conclusion, the MM-GBSA binding energy calculations displayed a remarkably higher binding affinity of 340 compared to darunavir.

The MM-GBSA scheme identifies different components the participate in the total binding energy (ΔGbinding), including van der Waals interactions (ΔEvdw), electrostatic interactions (ΔEele), electrostatic solvation free energy evaluated from the generalized Born equation (ΔEGB), the nonpolar component of the solvation energy (∆ESUR), total gas-phase energy (∆Ggas) and solvation free energy (∆GSolv). All these binding free energy components of 340 and darunavir with SARS-CoV-2 M pro are summarized in Table 2 . The MM-GBSA scheme identifies different components the participate in the total binding energy (∆G binding ), including van der Waals interactions (∆E vdw ), electrostatic interactions (∆E ele ), electrostatic solvation free energy evaluated from the generalized Born equation (∆E GB ), the nonpolar component of the solvation energy (∆E SUR ), total gas-phase energy (∆G gas ) and solvation free energy (∆G Solv ). All these binding free energy components of 340 and darunavir with SARS-CoV-2 M pro are summarized in Table 2 . Based on the evaluated MM-GBSA binding energies, van der Waals interactions (∆E vdw ) were found to be the prime force inducing molecular complexation with M pro for both bislatumlide A (∆E vdw of −56.1 kcal/mol) and darunavir (∆E vdw of −47.4 kcal/mol). Additionally, electrostatic interactions (E ele ) were an appropriate contributor for 340-and darunavir-M pro binding affinities with an average value of −27.7 and −15.1 kcal/mol, respectively. It is noted that E vdw is approximately two-fold more robust than the ∆E ele . Together these results provide quantitative data of the binding affinities of 340 and darunavir as putative M pro inhibitors.

Moreover, to explore the key residues that exhibit essential contributions to 340-and darunavir-M pro interactions, the per-residue decomposition of the binding free energy calculations was executed. All the residues with energetic contributions <−0.50 kcal/mol were considered and presented in Figure 4 . It is apparent that HIS41, GLY143, MET165, GLU166 and GLN189 amino acid residues contributed to the interactions of 340 and darunavir with M pro . A considerable contribution of the GLU166 amino acid residue to the total binding free energy was observed with values of −2.9 and −1.2 kcal/mol for 340-and darunavir-M pro complexes, respectively. In addition, the hydrophobic residues participate in higher binding affinity as a result of hydrophobic interactions between 340 and the hydrophobic residues. Based on the evaluated MM-GBSA binding energies, van der Waals interactions (ΔEvdw) were found to be the prime force inducing molecular complexation with M pro for both bislatumlide A (ΔEvdw of −56.1 kcal/mol) and darunavir (ΔEvdw of −47.4 kcal/mol). Additionally, electrostatic interactions (Eele) were an appropriate contributor for 340-and darunavir-M pro binding affinities with an average value of −27.7 and −15.1 kcal/mol, respectively. It is noted that Evdw is approximately two-fold more robust than the ΔEele. Together these results provide quantitative data of the binding affinities of 340 and darunavir as putative M pro inhibitors.

Moreover, to explore the key residues that exhibit essential contributions to 340-and darunavir-M pro interactions, the per-residue decomposition of the binding free energy calculations was executed. All the residues with energetic contributions <−0.50 kcal/mol were considered and presented in Figure 4 . It is apparent that HIS41, GLY143, MET165, GLU166 and GLN189 amino acid residues contributed to the interactions of 340 and darunavir with M pro . A considerable contribution of the GLU166 amino acid residue to the total binding free energy was observed with values of −2.9 and −1.2 kcal/mol for 340-and darunavir-M pro complexes, respectively. In addition, the hydrophobic residues participate in higher binding affinity as a result of hydrophobic interactions between 340 and the hydrophobic residues. Mining of naturally occurring plant-based compounds and marine-derived metabolites has evoked an upsurging interest in discovering potential SARS-CoV-2 M pro inhibitors. A comparison of the binding affinity of 340 with those previously reported as SARS-CoV-2 M pro inhibitors would give an informative insight into the preferential inclination of 340 as a prospective drug candidate. Towards an adequate comparison, only natural products and marine metabolites identified by employing a similar in silico technique were considered. Among the explored natural products, salvanolic acid and curcumin accentuated appreciable MM-GBSA binding energies against M pro over 40 ns MD course Mining of naturally occurring plant-based compounds and marine-derived metabolites has evoked an upsurging interest in discovering potential SARS-CoV-2 M pro inhibitors. A comparison of the binding affinity of 340 with those previously reported as SARS-CoV-2 M pro inhibitors would give an informative insight into the preferential inclination of 340 as a prospective drug candidate. Towards an adequate comparison, only natural products and marine metabolites identified by employing a similar in silico technique were considered. Among the explored natural products, salvanolic acid and curcumin accentuated appreciable MM-GBSA binding energies against M pro over 40 ns MD course with values of −44.8 and −34.2 kcal/mol, respectively [11] . Notably, rutin, a flavonol glycoside molecule, exhibited a debilitated binding affinity against M pro (∆G binding = −28.4 kcal/mol over 150 ns MD simulation) [7] . Two flavone nominees dubbed as PubChem-129-716-607 and PubChem-885-071-27 showed considerable binding affinities against M pro , over 150 ns MD course, with ∆G binding values of −69.0 and −68.1 kcal/mol, respectively [7] . Erylosides B, a terpene marine natural product, demonstrated preferential MM-GBSA binding energy with M pro over 100 ns MD simulation (calc. −51.9 kcal/mol) [8] . Comparing the MM-GBSA binding affinity of 340 to the earlier identified compounds robustly unveiled its competing binding affinity as a prospective M pro inhibitor. As a consequence, further investigation of the structural and energetic stability of 340 over 100 ns MD simulation is desired.

Structural and energetic analyses were conducted throughout the 100 ns MD simulations, as well as compared to those of darunavir to further emphasized the stability and behavior of 340 in complex with M pro . For structural and energetic analyses, four characteristics were evaluated from respective simulation trajectories: root-mean-square deviation (RMSD), hydrogen bond length, binding energy per frame and center-of-mass (CoM) distance.

The correlation between single-trajectory MM-GBSA binding energy and time was used to evaluate the comprehensive structural stability of 340 and darunavir in complex with M pro throughout the 100 ns MD simulations ( Figure 5 ). An interesting aspect of this graph is the general stabilities for 340 and darunavir with average binding energies (∆G binding ) of −44.8 and −34.8 kcal/mol, respectively. The most obvious finding to emerge from the analysis is that all complexes maintained stability over 100 ns MD simulations. [11] . Notably, rutin, a flavonol glycoside molecule, exhibited a debilitated binding affinity against M pro (ΔGbinding = −28.4 kcal/mol over 150 ns MD simulation) [7] . Two flavone nominees dubbed as PubChem-129-716-607 and PubChem-885-071-27 showed considerable binding affinities against M pro , over 150 ns MD course, with ΔGbinding values of −69.0 and −68.1 kcal/mol, respectively [7] . Erylosides B, a terpene marine natural product, demonstrated preferential MM-GBSA binding energy with M pro over 100 ns MD simulation (calc. −51.9 kcal/mol) [8] . Comparing the MM-GBSA binding affinity of 340 to the earlier identified compounds robustly unveiled its competing binding affinity as a prospective M pro inhibitor. As a consequence, further investigation of the structural and energetic stability of 340 over 100 ns MD simulation is desired.

Structural and energetic analyses were conducted throughout the 100 ns MD simulations, as well as compared to those of darunavir to further emphasized the stability and behavior of 340 in complex with M pro . For structural and energetic analyses, four characteristics were evaluated from respective simulation trajectories: root-mean-square deviation (RMSD), hydrogen bond length, binding energy per frame and center-of-mass (CoM) distance.

The correlation between single-trajectory MM-GBSA binding energy and time was used to evaluate the comprehensive structural stability of 340 and darunavir in complex with M pro throughout the 100 ns MD simulations ( Figure 5 ). An interesting aspect of this graph is the general stabilities for 340 and darunavir with average binding energies (ΔGbinding) of −44.8 and −34.8 kcal/mol, respectively. The most obvious finding to emerge from the analysis is that all complexes maintained stability over 100 ns MD simulations. 

Hydrogen bonds have a vital role in preserving the binding of investigated compounds with a protein. Consequently, hydrogen bond analysis was carried out for 340 and darunavir in complex with M pro throughout the 100 ns MD simulations (Table 3) . Table 3 demonstrated that the two inhibitors manifested stable hydrogen bonds with GLU166 with H-bond occupancy values of 90.3% and 85.7% for bislatumlide A and darunavir, respectively. The high H-bond occupancy confirms the significant role of GLU166 within the active site of M pro . A comparison of the data, summarized in Table 3 , reveals a higher stability for 340 than darunavir. More exactly, 340 exhibited three stable hydrogen bonds with HIS41, GLU166 and GLN189 with an average H-bond distance of 2.9, 2.8 and 2.6 Å, respectively. However, darunavir formed only a stable hydrogen bond with GLU166 with an average H-bond distance of 2.7 Å. The high stability for the bislatumlide A-M pro complex compared to darunavir-M pro complex is clearly supported by the current findings. 

Center-of-mass (CoM) distances were adopted to allow a deeper insight into the stability of inhibitor-M pro complexes over the 100 ns MD simulations ( Figure 6 ). From the data, it is apparent that CoM distances were more consistent for 340 complexed with M pro compared to darunavir with average values of 6.0 and 12.1 Å, respectively. The current results propose that 340 bound more tightly to the M pro complex compared to darunavir. 

Hydrogen bonds have a vital role in preserving the binding of investigated compounds with a protein. Consequently, hydrogen bond analysis was carried out for 340 and darunavir in complex with M pro throughout the 100 ns MD simulations (Table 3) . Table 3 demonstrated that the two inhibitors manifested stable hydrogen bonds with GLU166 with H-bond occupancy values of 90.3% and 85.7% for bislatumlide A and darunavir, respectively. The high H-bond occupancy confirms the significant role of GLU166 within the active site of M pro . A comparison of the data, summarized in Table 3 , reveals a higher stability for 340 than darunavir. More exactly, 340 exhibited three stable hydrogen bonds with HIS41, GLU166 and GLN189 with an average H-bond distance of 2.9, 2.8 and 2.6 Å, respectively. However, darunavir formed only a stable hydrogen bond with GLU166 with an average H-bond distance of 2.7 Å. The high stability for the bislatumlide A-M pro complex compared to darunavir-M pro complex is clearly supported by the current findings. 

Center-of-mass (CoM) distances were adopted to allow a deeper insight into the stability of inhibitor-M pro complexes over the 100 ns MD simulations ( Figure 6 ). From the data, it is apparent that CoM distances were more consistent for 340 complexed with M pro compared to darunavir with average values of 6.0 and 12.1 Å, respectively. The current results propose that 340 bound more tightly to the M pro complex compared to darunavir. Figure 6 . Center-of-mass (CoM) distances (in Å) between bislatumlide A (black) and darunavir (red) and GLU166 of M pro throughout 100 ns MD simulations. Figure 6 . Center-of-mass (CoM) distances (in Å) between bislatumlide A (black) and darunavir (red) and GLU166 of M pro throughout 100 ns MD simulations.

The root-mean-square deviation (RMSD) of the whole complex backbone atoms were plotted as a function of time to examine the structural stability of the 340 and darunavir-M pro complexes throughout the simulation time (Figure 7) . RMSD analysis demonstrated that the scrutinized complexes initiated stabilization after 20 ns and kept their stabilities until the end of the 100 ns MD simulations. The evaluated RMSD values for these complexes stayed beneath 0.26 nm throughout the MD simulation time. Overall, the current results demonstrated that 340 is tightly bonded and does not influence the structural stability of the M pro , as well as conserved structural integrity.

The root-mean-square deviation (RMSD) of the whole complex backbone atoms were plotted as a function of time to examine the structural stability of the 340 and darunavir-M pro complexes throughout the simulation time (Figure 7) . RMSD analysis demonstrated that the scrutinized complexes initiated stabilization after 20 ns and kept their stabilities until the end of the 100 ns MD simulations. The evaluated RMSD values for these complexes stayed beneath 0.26 nm throughout the MD simulation time. Overall, the current results demonstrated that 340 is tightly bonded and does not influence the structural stability of the M pro , as well as conserved structural integrity. 

The efficiency of curative drugs fundamentally relies on the molecular property and bioactivity of the molecules [32] was examined. To consider the drug-likeness in addition to bioactivity of 340, in silico molecular features were evaluated using a SwissADME web server and compared to those of darunavir. The predicted properties are shown in Table 4 .

The permeability through the cell membrane, as inspected by the mlogP value, was less than five (4.3 and 1.2 for bislatumlide A and darunavir, respectively), proposing that these inhibitors have adequate membrane permeability. Additionally, the number of hydrogen bond donors (nOHNH) and acceptors (nON) were less than 5 and 10, respectively. Moreover, the molecular weights for bislatumlide A and darunavir were 694.9 and 547.7, respectively, suggesting that these inhibitors are readily transported and/or diffused in the absorption process. Another parameter pointing out the molecular bio-absorption is the topological polar surface area (TPSA). The TPSA of 340 and darunavir were 119.4 and 148.8 Å, respectively, indicating a satisfactory cell membrane permeability and oral bioavailability level. 

The efficiency of curative drugs fundamentally relies on the molecular property and bioactivity of the molecules [32] was examined. To consider the drug-likeness in addition to bioactivity of 340, in silico molecular features were evaluated using a SwissADME web server and compared to those of darunavir. The predicted properties are shown in Table 4 . The permeability through the cell membrane, as inspected by the mlogP value, was less than five (4.3 and 1.2 for bislatumlide A and darunavir, respectively), proposing that these inhibitors have adequate membrane permeability. Additionally, the number of hydrogen bond donors (nOHNH) and acceptors (nON) were less than 5 and 10, respectively. Moreover, the molecular weights for bislatumlide A and darunavir were 694.9 and 547.7, respectively, suggesting that these inhibitors are readily transported and/or diffused in the absorption process. Another parameter pointing out the molecular bio-absorption is the topological polar surface area (TPSA). The TPSA of 340 and darunavir were 119.4 and 148.8 Å, respectively, indicating a satisfactory cell membrane permeability and oral bioavailability level.

One hundred and seventeen genes for severe acute respiratory syndrome diseases (SARS, C1175175) were recorded utilizing DisGeNET online tools. Using Venn diagram comparison analysis, frequently participated genes for 340 involved PRKCA, PRKCB, MAPK1 and MAPK14. A STRING database was utilized to recognize protein-protein inter-actions for 340 included the biochemical signaling genes AR, MAPK1, MAPK3, MAPK8, LYN, JAK2, SRC, MDM2 PTPN1 and JUN as an in silico natural-product inhibitor towards M pro and supplies a ligand lead for in vitro enzyme investigations (Figure 8 and Table S3 ).

One hundred and seventeen genes for severe acute respiratory syndrome diseases (SARS, C1175175) were recorded utilizing DisGeNET online tools. Using Venn diagram comparison analysis, frequently participated genes for 340 involved PRKCA, PRKCB, MAPK1 and MAPK14. A STRING database was utilized to recognize protein-protein interactions for 340 included the biochemical signaling genes AR, MAPK1, MAPK3, MAPK8, LYN, JAK2, SRC, MDM2 PTPN1 and JUN as an in silico natural-product inhibitor towards M pro and supplies a ligand lead for in vitro enzyme investigations ( Figure 8 and Table S3 ). 

Toward better genome-wide mining for 340, stimulated targets and their interactors, were determined using pathway enrichment analysis (PEA) and Boolean network analysis (BNA). A genome-wide hierarchy map representation of the pathways affected by 340 treatment was constructed ( Figure S2 ). The hierarchy map showed that among the most stimulated pathways was the "disease" pathway, particularly the potential therapeutic for the SARS pathway. In addition, a reacfoam tree of the top targeted/influenced pathways by the top 10 gene targets stimulated by 340 treatment against SARS-CoV-2 infection was constructed (Figure 9 ). Although the PEA results revealed that the top 10 gene targets stimulated by 340 were identified in 833 reactome pathways (each pathway was hit by at least one of them), the top three significantly enriched major pathways are (A) signal transduction pathway, (B) disease pathway and (C) immune system pathway, with a false discovery rate (FDR) of <0.00001%. Under these pathways, the interaction between the top 10 genes/signals stimulated with 340 treatment was visualized and mapped ( Figure S3 ). Additionally, interactors with these top 10 genes are listed (Table S4) .

Remarkably, under the most enriched major pathway (signal transduction), it was found that the MAPK family signaling cascades pathway was on the top of the most enriched pathway influenced by 340 within the human biological system (Figure 10) . Mining of the PEA analysis outcomes indicated that a set of five genes (MAPK1, MAPK3, JAK2, JUN and SRC) were significantly modulated as biological targets to 340 as potent SARS-CoV-2 inhibitor. Furthermore, the interactome results showed that these five genes were found to interact with other 48 genes/interactors (Table S4) .

Previous studies show that various alterations in a few signaling pathways can control many central biological functions of the cell after SARS-CoV-2 infection [33, 34] . Recently, several research reports found that the p38 mitogen-activated protein kinase (MAPK), nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB) and epi- 

Toward better genome-wide mining for 340, stimulated targets and their interactors, were determined using pathway enrichment analysis (PEA) and Boolean network analysis (BNA). A genome-wide hierarchy map representation of the pathways affected by 340 treatment was constructed ( Figure S2 ). The hierarchy map showed that among the most stimulated pathways was the "disease" pathway, particularly the potential therapeutic for the SARS pathway. In addition, a reacfoam tree of the top targeted/influenced pathways by the top 10 gene targets stimulated by 340 treatment against SARS-CoV-2 infection was constructed (Figure 9 ). Although the PEA results revealed that the top 10 gene targets stimulated by 340 were identified in 833 reactome pathways (each pathway was hit by at least one of them), the top three significantly enriched major pathways are (A) signal transduction pathway, (B) disease pathway and (C) immune system pathway, with a false discovery rate (FDR) of <0.00001%. Under these pathways, the interaction between the top 10 genes/signals stimulated with 340 treatment was visualized and mapped ( Figure S3 ). Additionally, interactors with these top 10 genes are listed (Table S4) .

Remarkably, under the most enriched major pathway (signal transduction), it was found that the MAPK family signaling cascades pathway was on the top of the most enriched pathway influenced by 340 within the human biological system (Figure 10) . Mining of the PEA analysis outcomes indicated that a set of five genes (MAPK1, MAPK3, JAK2, JUN and SRC) were significantly modulated as biological targets to 340 as potent SARS-CoV-2 inhibitor. Furthermore, the interactome results showed that these five genes were found to interact with other 48 genes/interactors (Table S4) .

Previous studies show that various alterations in a few signaling pathways can control many central biological functions of the cell after SARS-CoV-2 infection [33, 34] . Recently, several research reports found that the p38 mitogen-activated protein kinase (MAPK), nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB) and epidermal growth factor receptor (EGFR) signaling pathways are altered following coronavirus infection. These pathways play a crucial role in oppressing the host antiviral response and are essential for coronavirus entry, replication and apoptosis [35] . dermal growth factor receptor (EGFR) signaling pathways are altered following coronavirus infection. These pathways play a crucial role in oppressing the host antiviral response and are essential for coronavirus entry, replication and apoptosis [35] . dermal growth factor receptor (EGFR) signaling pathways are altered following coronavirus infection. These pathways play a crucial role in oppressing the host antiviral response and are essential for coronavirus entry, replication and apoptosis [35] . Indeed, accumulated evidence confirmed that the p38 MAPK signaling pathway can operate various essential biological activities depending on the stimuli and the type of stimulated tissue. Therefore, modulation of p38 MAPK signaling was found to raise cell death and survival [36] . Additionally, many reports emphasized the critical role of p38 MAPK signaling in several viral infections targeting the respiratory system; in HCoV-229E, the triggering of p38 MAPK is required to induce cytopathic effect (CPE), as well as the viral replication process. In addition, the upregulation of p38 MAPK may also promote the viral entry through the ACE2 endocytosis and cause subsequent inflammations, thrombosis and could initiate multi-organ failure in COVID-19 patients [37] .

Notably, one of the most common consequences of SARS-CoV-2 infection is pulmonary injury. In COVID-19 patients, the p38 MAPK signaling pathway, via p53, or its alternatives TGF-β1, or syntenin, drives apoptosis and ends with lung injury, which means that SARS-CoV-2 is likely to modulate the p38 MAPK signaling pathway to provoke the apoptosis and lung damage. Here, based on the Reactome mining, we found that 340 showed a potential therapeutic effect (Hit:32/144 with FDR:9.17E-1) against SARS-CoV-2 viral infection ( Figure S4 ). This potentiality may be attributed to 340 capability to re-modulate the p38 MAPK signaling pathway hijacked by SARS-CoV-2 viral infection and antagonize its harmful effects. This speculation was supported by recent reports that demonstrated the possibility of inhibiting the p38 MAPK signaling pathway as a promising therapeutic strategy against the SARS-CoV-2 pandemic [38, 39] .

A high-resolution (2.16 Å) biological unit for the X-ray crystallographic structure of SARS-CoV-2 main protease (M pro ) deposited in Protein Data Bank by Jin et al. (PDB ID: 6LU7 [17] ) in complex with peptidomimetic inhibitor (N3) was retrieved and utilized as a template for all molecular docking calculations and molecular dynamics (MD) simulations. The protein structure was prepared by eliminating all crystallographic water molecules, heteroatoms and ions, keeping only the amino acid residues. H++ webserver was applied to assign the protonation states of M pro [40] . Additionally, all missing hydrogen atoms were added. In H++ calculations, physiologic conditions of external dielectric constant = 80, pH = 7, salinity = 0.15 and internal dielectric constant = 10 were used to evaluate the pK a values of M pro amino acid residues.

A chemical library containing metabolites from the genus Sarcophyton reported over the last twenty years (1998-2019) [18] was assembled. Structures were retrieved from the PubChem database (https://pubchem.ncbi.nlm.nih.gov) in SDF format, except for 2D structures of bislatumlides A and B that were taken from the original article [41] . Omega2 software was used to generate three-dimensional (3D) structures of the investigated compounds [42, 43] . Geometrical structures were minimized with the assistance of Merck Molecular Force Field 94 (MMFF94S), implemented inside SZYBKI software [44, 45] . Undefined stereocenters were enumerated with the help of flipper application inside Omega2 software. A conformational search was performed to generate all conformers within the energy window value of 10 kcal/mol. The lowest energy conformer was subjected to minimization with the assistance of Merck Molecular Force Field 94 (MMFF94S), implemented inside SZYBKI software [44, 45] . The protonation state and tautomer enumeration of the compounds were examined by fixpka and tautomer applications, respectively, included in the QUACPAC software [46] . Two-dimensional (2D) structures are presented in Table S1 .

In the current study, AutoDock4.2.6 software was applied to perform all molecular docking calculations [47] . According to AutoDock protocol [48] , the pdbqt file of SARS-CoV-2 main protease (M pro ) was prepared. In AutoDock4.2.6, the maximum number of energy evaluations (eval) and the number of genetic algorithm (GA) run variables were set to 250 and 25,000,000, respectively. All other docking parameters were preserved at their default settings. The size of the box (60 Å × 60 Å × 60 Å) was specified to encompass the SARS-CoV-2 M pro active site appropriately. The binding site of SARS-CoV-2 M pro was precisely located based on the availability of resolved structures of M pro in complex with inhibitors [49] . An AutoGrid4.2.6 program was applied to generate maps with a grid spacing value of 0.375 Å. The coordinates of the grid center were placed at −13.069, 9. 740 and 68.490 (XYZ assignments, respectively). The Gasteiger method was utilized to compute the atomic partial charges of the studied compounds [50] . The anticipated binding modes for each compound were handled using the built-in clustering analysis (1.0 Å RMSD tolerance) and conformation with the lowest energy within the largest cluster was opted as a representative pose.

Molecular dynamics (MD) simulations were carried out for the most potent diterpenes in complex with M pro using AMBER16 software [51] . An AMBER force field of 14SB was employed to describe the M pro catalytic site [52] , while the general AMBER force field (GAFF2) [53] was used to characterize individual metabolites. Both implicit-solvent and explicit-solvent MD simulations were performed. In the implicit-solvent MD simulations, an AM1-BCC method with the assistance of the Antechamber tool implemented inside AMBER16 software was used to assign the atomic partial charges of the diterpenes [54] . Neither cutoff distance for nonbonded nor periodic boundary conditions were applied. Furthermore, the solvation influence was considered by utilizing igb = 1 solvent model [55] . Energy minimization was initially executed on the docked diterpene in complex with M pro for 500 steps. Gentle heating was carried out as well on the minimized complexes from 0 K to 300 K over 10 ps NVT MD simulations. The production stage was then performed over 250 ps, in addition to snapshots recorded every 1 ps. Therefore, 250 snapshots were derived from each MD simulation. Herein, the CPU version of pmemd (pmemd.MPI) implemented inside AMBER16 software was employed to conduct all implicit-solvent MD simulations.

In explicit-solvent MD simulations, atomic partial charges of the investigated metabolites were assigned at the HF/6-31G* level with assistance of Gaussian09 software with the restrained electrostatic potential (RESP) fitting approach [56, 57] . A water-solvated cubic box was constructed using a TIP3P water model with a minimum distance to the box edge of 15.0 Å (1.5 nm). All solvated systems were neutralized by adding Na + or Cl − counter-ions [58] . The maximum number of energy minimization steps were adjusted to 5000 utilizing combined steepest and conjugate gradient algorithms. The minimized systems were thereafter heated gradually to 300 K over 50 ps in the NVT ensemble. Additionally, the systems were sufficiently equilibrated for 1 ns under NPT conditions. The production stages were subsequently executed under an NPT ensemble for each studied M pro -metabolite complex over simulation times of 10 ns, 50 ns and 100 ns. Snapshots were gathered every 10 ps for post-MD analyses. The long-range electrostatic interactions were estimated using the Particle Mesh Ewald (PME) method. A short-range nonbonded interaction cutoff distance of 12 Å was applied [59] . The gamma_ln collision frequency applied was 1.0 ps −1 ; in addition, the Langevin thermostat was utilized to maintain the temperature at 298 K [60] . The pressure was controlled using a Berendsen barostat with a pressure relaxation time of 2 ps [61] . All bonds, including hydrogen atoms, were constrained using a SHAKE algorithm with a time step of 2 fs [62] . All explicit-solvent MD simulations were executed with the help of a GPU version of pmemd (pmemd.cuda) implemented inside an AMBER16 package. All in silico calculations, including molecular docking calculations, quantum mechanics calculations and MD simulations, were executed on the CompChem GPU/CPU hybrid cluster (hpc.compchem.net). Molecular graphics and analyses were executed with the assistance of BIOVIA DS Visualize 2020 [63] .

The binding free energies for the most potent metabolites that complexed with M pro were computed using molecular mechanical-generalized Born surface area (MM-GBSA) approach implemented inside AMBER16 software [64] . The MM-GBSA (∆G binding ) bind-ing free energy calculations were estimated based on the snapshots collected from MD simulations. The average binding free energy (∆G binding ) was evaluated as follows:

where the energy term (G) is estimated as:

E ele and E vdw are electrostatic and van der Waals energies, respectively. G SA stands for the nonpolar solvation-free energy, generally estimated via a linear function of the solvent-accessible surface area (SASA) using a LCPO algorithm [65] . G GB is the electrostatic solvation free energy computed from the generalized Born equation. The polar component of the desolvation energy was assigned via Onufriev's GB [66] (igb = 2). The solvent (exterior) and solute (interior) dielectric constants were set to 80 and 1, respectively. A single-trajectory method was applied, in which the coordinates of each metabolite-M pro , M pro and metabolite were obtained from a single trajectory. The configurational entropy (TS) is typically neglected due to the higher computational costs [30, 31] .

For the identified cembranoids, physicochemical properties including molecular weight (MW), octanol/water partition coefficient (LogP), hydrogen bond acceptor (HBA), topological polar surface area (TPSA), rotatable bond count (RB) and hydrogen bond donor (HBD) were estimated with assistance of SwissADME web server (http://www.swissadme.ch/).

Cembranoids were screened via an online website-based tool of SwissTargetPredicition (http://www.swisstargetprediction.ch) to recognize the possible targets for each ligand. InteractiVenn online tool was applied to design Venn Diagram [67] for accessible database for severe, acute respiratory syndrome diseases (DisGeNET database; https://www.disgenet.org). The top 100 genes for the most potential metabolite were retrieved. A functional database of STRING for top anticipated targets was then used to generate protein-protein interaction (PPI) [68] . Cytoscape 3.8.2 was used to inspect all probable target-function relations according to a network topology [69] . Furthermore, to explore all potential target-functions relationships for the top 10 targeted genes, pathway enrichment analysis was accomplished using Cytoscape 3.8.2 [69] . In addition, to investigate the impact of bislatumlide A (340) as a COVID-19 inhibitor candidate on human biological pathways computationally, Booleannetwork modeling was implemented. The fuzzy logic simulation approach [70] was implemented to mimic Boolean-network dynamic behavior, which consequently transformed from Reactome pathways by extending two-state Boolean variables to variables with values ranging from zero to one. In addition, a FoamTree representation based on Voronoi tessellation analysis for the top 10 gene targets stimulated by 340 was constructed. Finally, a Reactome FIViz plugin tool was utilized for genome-wide visualization of all possible drug-targets interactions [71] .

COVID-19 is a universal risk for positive human health and economic losses continue to build unabated. A rapid proceed, especially in vaccine and drug development, is substantial to conquer the further outbreak in prevalence and loss of human life from COVID-19 disease. Herein, Sarcophyton cembranoid diterpenes were screened as prospective M pro inhibitors using combined molecular docking and molecular dynamics approaches. Based on molecular docking calculations, MD simulations, as well as molecular mechanicsgeneralized born surface area (MM-GBSA) binding energy calculations, 340 manifested a convenient binding affinity with ∆G binding < −44.0 kcal/mol against M pro . The energetic and structural analyses throughout 100 ns MD simulations emphasized the high stability of 340. Drug-likeness properties for 340 were evaluated and demonstrated favorable physicochemical properties. The compound has the potential to re-modulate the p38 MAPK signaling pathway. In vitro and in vivo explorations are predicted to further identify the role of 340 as a potential inhibitor therapeutic for COVID-19 treatment.

Supplementary Materials: The following are available online at https://www.mdpi.com/article/ 10.3390/md19070391/s1, Figure S1 : 2D representations of interactions of darunavir and the top 59 potent Sarcophyton cembranoid diterpenes metabolites with the proximal amino acid residues of SARS-CoV-2 main protease (M pro ), Figure S2 : A genome-wide overview of the Reactome Pathway Analysis (RPA) results for the top 20 genes targets stimulated by bislatumlide A (340) against SARS-CoV-2, Figure S3 : Pathway digram analysis for enzymes/signals of the top 10 genes products/targets stimulated by bislatumlide A (340), Figure S4 : A diagrammatic model shows the potential therapeutic level of bislatumlide A (340) against SARS-CoV-2 viral infection, Table S1 : Estimated docking score (in kcal/mol) for darunavir and the investigated Sarcophyton cembranoid diterpenes metabolites towards SARS-CoV-2 main protease (M pro ), Table S2 : Computed Autodock and MM/GBSA binding energies (in kcal/mol) for darunavir and the top 58 potent Sarcophyton cembranoid diterpenes metabolites against SARS-CoV-2 main protease (M pro ) over 250 ps implicit solvent MD simulations, Table S3 : Network topological analysis for the predicted targets for bislatumlide A (340), Table S4 

The data presented in this study are available in the article/supplementary material.

The authors declare no conflict of interest.

An overview of their replication and pathogenesis

SARS and other coronaviruses as causes of pneumonia

Emerging coronaviruses: Genome structure, replication, and pathogenesis

Tractability gains in symmetry-adapted perturbation theory including coupled double excitations: CCD+ST(CCD) dispersion with natural orbital truncations

Coughs and Sneezes: Their Role in Transmission of Respiratory Viral Infections, Including SARS-CoV-2

Fast Identification of Possible Drug Treatment of Coronavirus Disease-19 (COVID-19) through Computational Drug Repurposing Study

Rutin and flavone analogs as prospective SARS-CoV-2 main protease inhibitors: In silico drug discovery study

Silico Mining of Terpenes from Red-Sea Invertebrates for SARS-CoV-2 Main Protease (M(pro)) Inhibitors. Molecules 2021

Natural-like products as potential SARS-CoV-2 M(pro) inhibitors: In-silico drug discovery

In-silico drug repurposing and molecular dynamics puzzled out potential SARS-CoV-2 main protease inhibitors

In silico drug discovery of major metabolites from spices as SARS-CoV-2 main protease inhibitors

Drug Repurposing for Candidate SARS-CoV-2 Main Protease Inhibitors by a Novel In Silico Method

Rational approach toward COVID-19 main protease inhibitors via molecular docking, molecular dynamics simulation and free energy calculation

Flavonoids: Promising natural compounds against viral infections

Potential bioactive glycosylated flavonoids as SARS-CoV-2 main protease inhibitors: A molecular docking and simulation studies

Flavonoids with inhibitory activity against SARS-CoV-2 3CLpro

Structure of M pro from SARS-CoV-2 and discovery of its inhibitors

Biomedical Potential of Marine Natural Products: Marine organisms are yielding novel molecules for use in basic research and medical applications

Marketed Marine Natural Products in the Pharmaceutical and Cosmeceutical Industries: Tips for Success

the International Natural Product Sciences Taskforce; Supuran, C.T. Natural products in drug discovery: Advances and opportunities

Trochelioid A and B, new cembranoid diterpenes from the Red Sea soft coral Sarcophyton trocheliophorum

Cytotoxic Cembranoids from the Red Sea Soft Coral Sarcophyton glaucum

Coronavirus puts drug repurposing on the fast track

Silico Evaluation of Prospective Anti-COVID-19 Drug Candidates as Potential SARS-CoV-2 Main Protease Inhibitors

Antiviral Activity and Safety of Darunavir/Cobicistat for the Treatment of COVID-19

Analysis of therapeutic targets for SARS-CoV-2 and discovery of potential drugs by computational methods

Role of Molecular Dynamics and Related Methods in Drug Discovery

Molecular dynamics simulations in drug design

Assessing the performance of the molecular mechanics/Poisson Boltzmann surface area and molecular mechanics/generalized Born surface area methods. II. The accuracy of ranking poses generated from docking

End-Point Binding Free Energy Calculation with MM/PBSA and MM/GBSA: Strategies and Applications in Drug Design

Drug-likeness analysis of traditional Chinese medicines: 1. property distributions of drug-like compounds, non-drug-like compounds and natural compounds from traditional Chinese medicines

The roles of signaling pathways in SARS-CoV-2 infection; lessons learned from SARS-CoV and MERS-CoV

Functional assessment of cell entry and receptor usage for SARS-CoV-2 and other lineage B betacoronaviruses

Imbalanced Host Response to SARS-CoV-2 Drives Development of COVID-19

CTGF/Hcs24 induces chondrocyte differentiation through a p38 mitogen-activated protein kinase (p38MAPK), and proliferation through a p44/42 MAPK/extracellularsignal regulated kinase (ERK)

ACE2: The key Molecule for Understanding the Pathophysiology of Severe and Critical Conditions of COVID-19: Demon or Angel? Viruses

p38 MAPK inhibition: A promising therapeutic approach for COVID-19

Inhibition of human coronavirus 229E infection in human epithelial lung cells (L132) by chloroquine: Involvement of p38 MAPK and ERK

H++: A server for estimating pKas and adding missing hydrogens to macromolecules

Two new biscembranes with unprecedented carbon skeleton and their probable biogenetic precursor from the Hainan soft coral Sarcophyton latum

Conformer Generation with OMEGA: Algorithm and Validation Using High Quality Structures from the Protein Databank and Cambridge Structural Database

OMEGA 2.5.1.4; OpenEye Scientific Software

MMFF94s option for energy minimization studies

AutoDock4 and AutoDockTools4: Automated docking with selective receptor flexibility

Computational protein-ligand docking and virtual drug screening with the AutoDock suite

A Comprehensive Mapping of the Druggable Cavities within the SARS-CoV-2 Therapeutically Relevant Proteins by Combining Pocket and Docking Searches as Implemented in Pockets 2.0

Iterative partial equalization of orbital electronegativity-A rapid access to atomic charges

Improving the Accuracy of Protein Side Chain and Backbone Parameters from ff99SB

Development and testing of a general amber force field

Fast, efficient generation of high-quality atomic charges. AM1-BCC model: II. Parameterization and validation

Implicit solvent models

A well-behaved electrostatic potential based method using charge restraints for deriving atomic charges: The RESP model

Comparison of simple potential functions for simulating liquid water

Particle mesh Ewald: An N·log(N) method for Ewald sums in large systems

Langevin stabilization of molecular dynamics

Molecular dynamics with coupling to an external bath

An analytical version of the SHAKE and RATTLE algorithm for rigid water models

Combined molecular mechanical and continuum solvent approach (MM-PBSA/GBSA) to predict ligand binding

Approximate atomic surfaces from linear combinations of pairwise overlaps (LCPO)

Exploring protein native states and large-scale conformational changes with a modified generalized born model

InteractiVenn: A web-based tool for the analysis of sets through Venn diagrams

Anti-colorectal cancer targets of resveratrol and biological molecular mechanism: Analyses of network pharmacology, human and experimental data

Cytoscape: A Software Environment for Integrated Models of Biomolecular Interaction Networks

Training Signaling Pathway Maps to Biochemical Data with Constrained Fuzzy Logic: Quantitative Analysis of Liver Cell Responses to Inflammatory Stimuli

Visualization of drug target interactions in the contexts of pathways and networks with ReactomeFIViz