key: cord-0870143-0outtyuo authors: Eggers, Maren; Schwebke, Ingeborg; Suchomel, Miranda; Fotheringham, Valerie; Gebel, Jürgen; Meyer, Bernhard; Morace, Graziella; Roedger, Hans Joachim; Roques, Christine; Visa, Pilar; Steinhauer, Katrin title: The European tiered approach for virucidal efficacy testing – rationale for rapidly selecting disinfectants against emerging and re-emerging viral diseases date: 2021-01-21 journal: Euro Surveill DOI: 10.2807/1560-7917.es.2021.26.3.2000708 sha: 9474ff78fa75e510f51cbe093c3b490a4eb25edf doc_id: 870143 cord_uid: 0outtyuo When facing an emerging virus outbreak such as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), a quick reaction time is key to control the spread. It takes time to develop antivirals and vaccines, and implement vaccination campaigns. Therefore, preventive measures such as rapid isolation of cases and identification and early quarantine of cases’ close contacts—as well as masks, physical distancing, hand hygiene, surface disinfection and air control—are crucial to reduce the risk of transmission. In this context, disinfectants and antiseptics with proven efficacy against the outbreak virus should be used. However, biocidal formulations are quite complex and may include auxiliary substances such as surfactants or emollients in addition to active substances. In order to evaluate disinfectants’ efficacy objectively, meaningful efficacy data are needed. Therefore, the European Committee for Standardisation technical committee 216 ‘Chemical disinfectants and antiseptics’ Working Group 1 (medical area) has developed standards for efficacy testing. The European tiered approach grades the virucidal efficacy in three levels, with corresponding marker test viruses. In the case of SARS-CoV-2, disinfectants with proven activity against vaccinia virus, the marker virus for the European claim ‘active against enveloped viruses’, should be used to ensure effective hygiene procedures to control the pandemic. When facing an emerging virus outbreak such as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), a quick reaction time is key to control the spread. It takes time to develop antivirals and vaccines, and implement vaccination campaigns. Therefore, preventive measures such as rapid isolation of cases and identification and early quarantine of cases' close contacts-as well as masks, physical distancing, hand hygiene, surface disinfection and air control-are crucial to reduce the risk of transmission. In this context, disinfectants and antiseptics with proven efficacy against the outbreak virus should be used. However, biocidal formulations are quite complex and may include auxiliary substances such as surfactants or emollients in addition to active substances. In order to evaluate disinfectants' efficacy objectively, meaningful efficacy data are needed. Therefore, the European Committee for Standardisation technical committee 216 'Chemical disinfectants and antiseptics' Working Group 1 (medical area) has developed standards for efficacy testing. The European tiered approach grades the virucidal efficacy in three levels, with corresponding marker test viruses. In the case of SARS-CoV-2, disinfectants with proven activity against vaccinia virus, the marker virus for the European claim 'active against enveloped viruses', should be used to ensure effective hygiene procedures to control the pandemic. When facing an emerging infectious disease outbreak, a quick reaction time is crucial to control the spread. However, it takes time to develop and produce therapeutics and/or vaccines [1] . The challenge becomes even greater with a fast-spreading disease such as coronavirus disease (COVID-19) [2] . Like viruses that cause severe acute respiratory syndrome (SARS), Ebola virus disease, Middle East respiratory syndrome (MERS) and Nipah virus infection, SARS coronavirus 2 (SARS-CoV-2)-the causing agent of COVID-19-is an example of a virus that has emerged at the human-animal interface within the last two decades [2] [3] [4] [5] [6] . Additionally, air travel has facilitated an increasingly interconnected world with more frequent cross-border movements of people and trade goods, enabling the rapid spread of infectious diseases globally [7] . Measures are needed to control COVID-19, whether these are non-pharmaceutical, a pharmaceutical prophylactic or a pharmaceutical treatment [8, 9] . Though COVID-19 pandemic activity decreased in Europe in the early summer months of 2020, a second wave began in autumn and it is possible that additional waves could occur this winter [10] . Non-pharmaceutical measures (NPM)-including rapid isolation of positively tested cases and identification and early quarantine of cases' close contacts, as well as barriers such as masks, physical distancing [11] , hand hygiene, surface disinfection and air control in concerned hospital settingsremain crucial to reduce the risk of person-to-person transmission of SARS-CoV-2 by asymptomatic, presymptomatic or symptomatic infected persons in healthcare and non-healthcare (e.g. community) settings. The use of antiseptics and disinfectants has long been a widely accepted part of infection prevention and control to support healthcare professionals, patients and people at higher risk of serious illness with rapid and efficacious measures. In general, biocidal disinfectant or antiseptic formulations are complex and may include auxiliary substances such as surfactants or emollients in addition to active substances, which can influence the effect of the disinfectant. Therefore, recommending to use a product that contains a certain biocidal active substance is not adequate to identify suitable products. In general, it is important to have a standardised test protocol for comparing the efficacy of disinfectant and antiseptic products [12] . In order to select antiseptics and disinfectants with proven efficacy, the European Committee for Standardisation (CEN, Comité Européen de Normalisation in French) established the technical committee (TC) 216 in 1990 for chemical disinfectants and antiseptics. The scope of this TC is to set up guidance for the standardisation of the terminology, requirements, test methods (including potential efficacy under in-use conditions), recommendations for use and labelling of chemical disinfectants and antiseptics. This committee consists of delegates from different European countries, with representatives from governments, competent authorities (i.e. public health institutes, regulatory authorities), official institutes, universities, test laboratories and manufacturers of antiseptics and disinfectants. European standards for testing antiseptics and disinfectants are based on a tiered approach, using relevant surrogate test organisms. This helps to facilitate efficacy tests and to develop adequate practical recommendations regarding the disinfectants that can be used immediately in an ongoing outbreak, which will add confidence to the bundle of measures necessary to prevent spread of infectious diseases. Information on the efficacy of disinfectants and antiseptics against emerging enveloped viruses such as Ebola virus (EBOV) or SARS-CoV-2 is limited because of the high biosafety level (BSL) of these viruses or because they are not available in laboratories, particularly at the beginning of an outbreak. To avoid this problem, vaccinia virus (modified vaccinia virus Ankara (MVA) or vaccinia virus strain Elstree, respectively) was introduced as a surrogate virus for the European claim 'active against enveloped viruses' in 2015, after in vitro studies comparing MVA with EBOV, SARS-CoV-1 and MERS-coronavirus (CoV) using povidone-iodine (PVP-I) showed that vaccinia virus was the most resilient virus [13, 14] . This is in line with a publication that demonstrated in its investigation of enveloped viruses-such as Zika virus, EBOV and coronaviruses-that vaccinia is a suitable and safe surrogate when looking at the virucidal efficacy of alcoholic formulations for hand disinfectants [15] . Meanwhile, the efficacy of these disinfectants (PVP-I and alcoholic World Health Organization formulations) has also been proven against SARS-CoV-2 [16, 17] . The European approach with surrogate organisms has been effective for more than 60 years against bacteria and for about 40 years against viruses, e.g. in German national standards. The choice of surrogate viruses is of great importance when establishing a standardised test. The requirements for standardised surrogate viruses are: high resistance to disinfectants and drying, combined with simple virus propagation in cell culture, availability in virus collections and a low BSL (BSL 1 and 2). For example, 30 years ago, European virucidal activity tests focused only on the most resistant virus: hepatitis A, a picornavirus that it is difficult to handle in a routine testing laboratory. The poliovirus 1 Sabin vaccine strain Lsc-2ab, another picornavirus, can easily be handled in cell culture for virus propagation and therefore became the first surrogate virus for the claim 'virucidal activity'. Presently, the tiered approach on the virucidal standard EN 14476 [18] consists of two parts: three different activity levels and two kinds of test methods, as shown in Table 1 . The three European virucidal activity levels take into account that enveloped viruses contain lipids and have lipophilic properties (Box). These viruses are sensitive to disinfectants that contain active substances that disrupt their lipid bilayer envelope. In contrast, nonenveloped viruses are usually hydrophilic and less susceptible to disinfectants. Thus, viruses can be grouped according to these properties ( Table 2) . The CEN/TC 216 requires a stepwise procedure for efficacy testing of disinfectants, i.e. first a test in suspension (EN phase 2, step 1), followed by a test simulating practical conditions in the laboratory (EN phase 2, step 2). This tiered approach, including organic soiling, is described in the framework standard EN 14885 [19] . The quantitative suspension test EN 14476 is a phase 2, step 1 test [18] and is the first tier to evaluate the performance of the disinfectant in terms of concentration and contact time ratio. The EN 14476 demands a 4 log reduction (deactivating 99.99%) of the respective test viruses as the minimum measure of efficacy. In addition, activity tests have to be performed in compliance with adequate quality assurance systems and according to valid test procedures, as described in the relevant European standard(s) [19] . In recent years, Human coronaviruses (e.g. SARS-CoV-2 and MERS-CoV), influenza virus A (e.g. subtype H1N1 , H3N2) tests simulating practical conditions have been developed for surface, instrument and hand disinfectants that take into account the application of a specific disinfectant under evaluation. Surface disinfection Viruses may persist on surfaces for several days or even months [20] and can be transferred directly from contaminated surfaces to susceptible individuals [21] . Therefore, the disinfection of surfaces frequently touched by patients and staff such as door handles, faucets and railings plays an important role in the prevention and control of viral outbreaks in healthcare settings. Disinfectants must be tested for their efficacy under standardised, close to real-life conditions to ensure that they are able to inactivate viruses. This approach has long been standardised according to European principles for testing the bactericidal activity of chemical disinfectants [22, 23] . Bactericidal disinfectants are tested stepwise according to European test principles, starting with a suspension test (EN phase 2, step 1) and then a quantitative non-porous carrier test simulating practical conditions (EN phase 2, step 2) [18] . It is also possible for the activity of virucidal products intended for surface disinfection to be tested under practical conditions (phase 2, step 2) according to the EN 16777 standard [24, 25] . In order to further improve our knowledge of the time/ concentration relationships of handrubs, taking into consideration practical conditions for use in clinical surroundings, more practical testing (phase 2, step 2 tests) are necessary, such as the EN 1500 for evaluating the bactericidal efficacies of hygienic handrubs [26] . In such tests, the bactericidal efficacy of products is compared with that of a reference procedure on hands of volunteers artificially contaminated with Escherichia coli K12. Disinfectants and antiseptics are part of the bundle of measures necessary to achieve infection prevention and control in healthcare settings and the community. The European tiered approach of grading the virucidal efficacy as 'virucidal activity against enveloped viruses', 'limited spectrum of virucidal activity' and 'virucidal activity' helps to select the most appropriate claim for emerging or re-emerging virus outbreaks, with a proven concentration and contact time. This leads to the correct choice of test method to determine the appropriate use, concentration and contact time of antiseptics and disinfectants. The standards outlined in Table 1 are subject to mutual recognition in the European Union and replace previous national standards. Furthermore, the standardised test protocol based on the use of surrogate viruses and two methodical steps also helps to compare formulations in an objective way, thus providing proven efficacy to the end user. European virucidal activity levels • Virucidal activity against enveloped viruses: Activity against enveloped viruses (e.g. influenza (including avian influenza A (H7N9)), herpes viruses, HIV, HBV, HCV, Zika virus, Ebola virus, coronaviruses (including SARS-CoV-2 and MERS-CoV) and flaviviruses). This claim is for hand disinfection, surface disinfection and pre-cleaning products for instruments, which are combined cleaner/disinfectants. • Limited spectrum virucidal activity: Activity against non-enveloped noroviruses, rotaviruses, adenoviruses and enveloped viruses. This claim is for hand disinfection and surface disinfection. • Virucidal activity: Activity against viruses, including non-enveloped (e.g. polioviruses and enteroviruses, such as enterovirus 71 and enterovirus D68) and enveloped viruses. This claim is for hand disinfection, surface disinfection, instrument disinfection and textile disinfection. HBV: hepatitis B virus; HCV: hepatitis C virus; MERS-CoV: Middle East respiratory syndrome coronavirus; SARS-CoV-2: severe acute respiratory syndrome coronavirus 2. Developing Covid-19 Vaccines at Pandemic Speed A novel coronavirus from patients with pneumonia in China Nipah virus: a recently emergent deadly paramyxovirus The severe acute respiratory syndrome Isolation of a novel coronavirus from a man with pneumonia in Saudi Arabia reflections on early investigations into the Ebola virus The interconnected and cross-border nature of risks posed by infectious diseases WHO COVID-19. Experimental Treatments. Classification of treatment types. Geneva: WHO; 2020 DRAFT landscape of COVID-19 candidate vaccines 2020. Geneva: WHO Risk related to spread of new SARS-CoV-2 variants of concern in the EU/EEA -29 December2020. Stockholm: ECDC; 2020 Physical distancing, face masks, and eye protection to prevent person-to-person transmission of SARS-CoV-2 and COVID-19: a systematic review and meta-analysis Stability of SARS-CoV-2 on environmental surfaces and in human excreta Povidoneiodine hand wash and handrub products demonstrated excellent in vitro virucidal efficacy against Ebola virus and modified vaccinia virus Ankara, the new European test virus for enveloped viruses Rapid and Effective Virucidal Activity of Povidone-Iodine Products Against Middle East Respiratory Syndrome Coronavirus (MERS-CoV) and Modified Vaccinia Virus Ankara (MVA) Virucidal Activity of World Health Organization-Recommended Formulations Against Enveloped Viruses, Including Zika, Ebola, and Emerging Coronaviruses Povidone-Iodine Demonstrates Rapid In Vitro Virucidal Activity Against SARS-CoV-2, The Virus Causing COVID-19 Disease Inactivation of Severe Acute Respiratory Syndrome Coronavirus 2 by WHO-Recommended Hand Rub Formulations and Alcohols Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of virucidal activity in the medical area Chemical disinfectants and antiseptics -Application of European Standards for chemical disinfectants and antiseptics How long do nosocomial pathogens persist on inanimate surfaces? A systematic review The role played by contaminated surfaces in the transmission of nosocomial pathogens Disinfectant testing on surfaces Assessment of the efficacy of disinfectants on surfaces Chemical disinfectants and antiseptics -Quantitative non-porous surface test without mechanical action for the evaluation of virucidal activity of chemical disinfectants used in the medical area -Test method and requirements German version Chemical disinfectants and antiseptics. Hygienic handrub. Test method and requirements Antiviral activity of an alcoholic hand disinfectant. Comparison of the in vitro suspension test with in vivo experiments on hands, and on individual fingertips Chemical disinfectants and antiseptics -Hygienic handrub virucidal -Test method and requirements Chemical disinfectants and antiseptics -Quantitative carrier test for the evaluation of virucidal activity for instruments used in the medical area -Test method and requirements German version We thank the CEN/TC 216 /WG5 strategy group and Glenn Sung, Singapore, for the helpful discussion. This is an open-access article distributed under the terms of the Creative Commons Attribution (CC BY 4.0) Licence. You may share and adapt the material, but must give appropriate credit to the source, provide a link to the licence and indicate if changes were made.Any supplementary material referenced in the article can be found in the online version.