key: cord-0861925-5m6sqwq8 authors: Kumar, Harender; Azad, Amaanuddin; Gupta, Ankit; Sharma, Jitendra; Bherwani, Hemant; Labhsetwar, Nitin Kumar; Kumar, Rakesh title: COVID-19 Creating another problem? Sustainable solution for PPE disposal through LCA approach date: 2020-10-09 journal: Environ Dev Sustain DOI: 10.1007/s10668-020-01033-0 sha: b04668cab6d5f261f28bf0296f0aa5639f3e9680 doc_id: 861925 cord_uid: 5m6sqwq8 Amid COVID-19, there have been rampant increase in the use of Personal Protective Equipment (PPE) kits by frontline health and sanitation communities, to reduce the likelihoods of infections. The used PPE kits, potentially being infectious, pose a threat to human health, terrestrial, and marine ecosystems, if not scientifically handled and disposed. However, with stressed resources on treatment facilities and lack of training to the health and sanitation workers, it becomes vital to vet different options for PPE kits disposal, to promote environmentally sound management of waste. Given the various technology options available for treatment and disposal of COVID-19 patients waste, Life Cycle Assessment, i.e., cradle to grave analysis of PPE provides essential guidance in identifying the environmentally sound alternatives. In the present work, Life Cycle Assessment of PPE kits has been performed using GaBi version 8.7 under two disposal scenarios, namely landfill and incineration (both centralized and decentralized) for six environmental impact categories covering overall impacts on both terrestrial and marine ecosystems, which includes Global Warming Potential (GWP), Human Toxicity Potential (HTP), Eutrophication Potential (EP), Acidification Potential (AP), Freshwater Aquatic Ecotoxicity Potential (FAETP) and Photochemical Ozone Depletion Potential (POCP). Considering the inventories of PPE kits, disposal of PPE bodysuit has the maximum impact, followed by gloves and goggles, in terms of GWP. The use of metal strips in face-mask has shown the most significant HTP impact. The incineration process (centralized−3816 kg CO2 eq. and decentralized−3813 kg CO2 eq.) showed high GWP but significantly reduced impact w.r.t. AP, EP, FAETP, POCP and HTP, when compared to disposal in a landfill, resulting in the high overall impact of landfill disposal compared to incineration. The decentralized incineration has emerged as environmentally sound management option compared to centralized incinerator among all the impact categories, also the environmental impact by transportation is significant (2.76 kg CO2 eq.) and cannot be neglected for long-distance transportation. Present findings can help the regulatory authority to delineate action steps for safe disposal of PPE kits. In December 2019, a pneumonia type outbreak was reported in Wuhan, China (New York Times 2020) which was traced to a novel strain of coronavirus (WHO 2020a). During January 2020 WHO declared Coronavirus disease (COVID-19) as a pandemic disease (WHO 2020b), which spread very rapidly from human to human by personal contact, contact with air-water droplets during sneezing, and coughing of coronavirus affected person (Bherwani et al. 2020a; Nair et al. 2020; Wathore et al. 2020; Gupta et al. 2020) . As of 14 June 2020, there have been at least 4, 30,139 confirmed deaths, and more than 77, 87,271 (COVID-19 Dashboard CSSE) confirmed cases under COVID-19 pandemic. Since to date, there is no vaccine identified yet (WHO 2020a, b, c, d, e; Healthline 2020) for the effective prevention of COVID-19 disease, thus other measures recommended by WHO to mitigate the spread of COVID-19 (WHO 2020c) become very vital for peoples among this pandemic (Kaur et. al. 2020) . The adverse impacts of COVID-19 on human and planetary health will arise from different sources during the response (UNEP 2020). As per a WHO estimate, 89 million medical mask, 76 million examination gloves and 1.6 million goggles are required for the COVID-19 response each month (WHO 2020e) for which the manufacturing capacity should ramp by 40%, to meet the rising global demand (Park et al. 2020) . With reported cases of COVID-19 infected health and sanitation workers (Satheesh 2020 ; Hindustan times 2020; New India Express 2020), waste management of used infectious safety gears has become a critical component to restrict the spread of novel coronavirus (Bherwani et al. 2020b; Vanapalli et al. 2020) . According to WWF report (Italy WWF 2020) , "If only 1% of the masks were disposed of incorrectly and perhaps dispersed in nature, would result in 100 million masks per month in the environment". Across the globe, an unprecedented rise in the COVID-19 cases, the amount of waste of infectious waste generated, far exceeds the available capacity for treatment. Worldwide waste management systems have already been unable to deal with existing waste satisfactorily, the imminent surge in the volume of waste from COVID-19 pandemic threatens to overwhelm existing waste management systems as do healthcare capacity. The directives from WHO, which mandate incineration of PPEs and other infectious wastes, especially made from plastic, has increased the load on the incineration facilities (WHO 2017a, b) . In China, with 370% rise in Hubei province and with 600% rise in Wuhan, i.e., from a normal level to 40 t/day to about a peak 240 t/day, exceeding the maximum incineration capacity available with the country (Jiri et al. 2020; Ivy S. 2020; Klemeš et al. 2020) . Similar, the Waste Agency of Catalonia (ARC), Spain, has noticed a 350% increase in medical waste with added 925 tons/month more than usual (ACR 2020). In the USA, a multi-fold increase in from PPEs has been reported (Justine 2020). In India, Gurugram city has seen two times increase in the quantity of COVID-19 related BMW with a prediction of over a ton of COVID-19 related BMW every day (Prayag 2020) . The North Delhi Municipal Corporation (NDMC), India, has also observed an additional 11.4 tons of hazardous waste from households (Abhimanyu C. 2020) , and Ahmedabad's Apollo hospital gave reported a 1.5 fold increase in BMW in comparison to normal of 100-120 kg per day (Yahoo 2020) . The effective management of coronavirus infectious waste, including PPEs, has been identified by as a key area of concern by regulatory agencies in India, with the release of waste handling-treatment-disposal guidelines generated during treatment-diagnosis-quarantine of COVID-19 patients (CPCB Revision 2020; Aggarwal 2020). Unlike India, other countries like EU member countries have made changes in waste management in the context of the coronavirus crisis (Virjinijus S. 2020). Some European municipalities have suspended the plastic recycling industry with the fear that workers getting infected as the virus remains on the surface of waste bags and materials when they are collected (Zero Waste 2020a; Zero Waste 2020b) The use of Personal Protective Equipment (PPE) has emerged as the most reliable and visible preventive control safety gear to keep the COVID-19 transmission at bay (Herron et al. 2020) . Typical PPEs, also referred as PPE kits, are made of over 50% plastics (which takes up to 500 years to degrade) like PP, PC, and PVC, etc., includes surgical face mask with metal strip, gloves, goggles, full-body suits containing pant, gown with head cover and shoe cover (Park et al. 2020 ). National Disaster Management & Safety protocols have advised the use of PPEs, by attending physicians and all the healthcare-nursing staff, funeral workers including visiting families etc., who are directly or indirectly in contact of any COVID-19 (confirmed or suspected) patients (Selvakumar et al. 2020; WHO 2020d; NMPA 2020) . In the wake of necessary preventive control measures, it is evident that the used PPEs waste is likely to increase multiple folds and will stress the current waste management systems, and now pose a grave threat to the environment, if not tackled properly (ICT 2008) . In developing countries, with lack of complete connectivity and waste handling capacities in existing Centralized Bio-medical Waste Treatment Facilities (CBMWTF), the COVID-19 infectious waste handling has become a grave concern (Henam and Shrivastav 2019; WHO 2017a, b; CPCB 2017). In India, practical implementation of effective COVID-19 waste management guidelines, with multiple cares at each step, including containers/bins/ trolleys be disinfected daily, use of double-layered bags (using 2 bags) of collection, regular sanitization of workers, and vehicle sanitization etc. (CPCB 2020; Aggarwal 2020) becomes looming and challenging. In populous countries like India of 138 crore people (Worldometer 2020) and having fifth-highest number of confirmed cases in the world (The Guardian 2020), with overcrowded hospitals, large cities only connected to CBMWTF and lack of training of health workers (WHO 2017a, b) and having institutional and residential quarantine centre's staff, adds to the challenges. There have been reports of dumping of masks and medical waste, leading to unknowing containmination of workers with coronavirus from various cities of India (Abhimanyu C. 2020; The New York Times 2020). Hence, in consideration with the above, it becomes essentially important to explore and encourage decentralized disposal techniques, with treatment and disposal at source, of effective waste management, considering handling, storage and transportation-related risks. From Table 1 , it can be inferred that majority of the previous research works focused on the alternatives to use and reuse PPEs and to minimize its requirement as well as waste generation through methods like disinfection by ultraviolet rays or treating used PPEs with hydrogen peroxide. But these studies lacked in considering other vital environmental impact parameters, during manufacturing and disposal of PPEs waste to the environment. The current research focused on the cradle to grave analysis of PPEs for environmentally sound and sustainable management of these wastes, which has not been reported till date. Thus, our present study on Life Cycle Assessment of PPEs for disposal of infectious PPE waste becomes very vital for environmentally sound management of PPE waste. The present work has tried to evaluate different disposal options for PPE kits, i.e., landfill, centralized incinerator and decentralized incinerator, with a view to promote environmentally sound management of waste. The study entails an assessment of all the life cycle stages including raw material extraction, material processing, production, use, disposal of PPE kits, using Life Cycle Assessment (LCA) tools, with an idea to transform the country's waste management sector into a secondary resource recovery sector, coupled with its integration with the manufacturing sector, to implement and promote a circular economy and ecosystem services conservation approach through a life cycle approach (Bherwani et al. 2020c; Draft NERP 2019) . LCA is defined as "a tool to assess the potential environmental impacts and resources used throughout a product's life cycle, i.e., from raw material acquisition, via production and use stages, to waste management" (ISO 2006) . LCA enables the estimation of the cumulative and realistic environmental impacts resulting from all the stages of a product life cycle, while also including impacts which are sometimes not included in the conventional analysis. In the current research, LCA is conducted according to the ISO 14,040 and ISO 14,044 standards. The main goal of this study is to evaluate the relative human health and environmental impacts caused by raw material extraction, production, use, and disposal of PPE kit. Amid The analysis is done in the form of three case studies namely Case-I, Case-II, and Case-III as shown in Fig. 1 , based on disposal options. • Case-I: centralized incineration waste management system refers to the system in which the common facility of waste treatment is considered. The waste is collected from the source of waste generation and is transported to the waste disposal site with the help of compacted trucks. The distance from Nagpur city to Bhandewadi yard, site for waste disposal is 10 km, and therefore, this distance has been taken for centralized system analysis (Arcadis 2017). • CASE-II: A decentralized incineration waste management system is about each community managing and processing their waste in their locality and not sending it to a centralized large processing facility or often landfill (Agrawal and Jadon 2018. • Case-III: Comprising of landfill disposal technique for PPE. The three case studies are so designed to estimate, compare, and evaluate the environmental and health impacts caused by the transportation activity as well as by landfill and incineration process. The functional unit refers to a quantified description of the primary function of the system under study. The functional unit adopted for this study is the 1 ton of PPE kit (Babu et al. 2014 ). The PPE kit comprised of the goggles, gloves, shoe cover, mask, and overall suit, comprising of gown and pant. All the above-mentioned components of the PPE kit were precisely measured and weighed with the help of a weighing balance. All the items of the disposable PPE kit were one-time use only except goggles, which can be reused for 6 days (MoHFW). The reusability of goggles has been taken in this study as well (MoHFW 2020) after following proper precaution and disinfection guidelines as stated by the World Health Organization (WHO Guidelines 2020). Figure 2 gives details about the PPE kits configuration and composition. The material that comprises of these products were identified primarily based on manufacturer specification and through peer-reviewed literature (Marcin 2013; Seemal et al. 2020 ; Halyard; PAHO 2020; The conversation 2020). The system boundary is the set of criteria specifying which activities are part of the studied system and which resource use and emissions associated with them are included in the study. The system boundary of the LCA study includes all direct and indirect resources use and emissions, like manufacturing, suppliers, along with the use and endof-life phase. In this study, materials like polypropylene (PP), nitrile butadiene rubber (NBR), polycarbonate (PC), and metal strip used in the manufacturing of PPE kit were included in the system boundary. Also, the use of PPE by frontline workers, vehicles used in transportation, and PPE disposal are also incorporated under the system boundary as shown in Fig. 3 Environmental impacts are calculated in terms of GWP (kg CO 2 equivalent), AP (kg SO 2 equivalent), EP (kg PO 4 equivalent), HTTP (kg DCB equivalent), FAETP (kg DCB equivalent) and POCP (kg ethane equivalent). The life cycle inventory (LCI) model aims to link all unit processes that are required to deliver the product studies in an LCA. In the current study, all flows of the materials, energy, and all the waste streams related to the functional unit were identified and quantified. The study focused on the total impact caused by the PPE kit from their process of "cradle to grave". The impact categories are selected in a way that laid more emphasis on the environment and human health. Since there were only a few inventories contributing to other impacts, they are not considered in this study. The six impact categories chosen for this study are mainly Global Warming Potential (GWP), Human Toxicity Potential (HTP), Acidification Potential (AP) Eutrophication Potential (EP), Freshwater Aquatic Ecotoxicity Potential (FAETP), and Photochemical Ozone Creation Potential (POCP) (Rejane et al. 2019) . The emission from the incineration process may give negative values due to application of heat recovery systems (Jeswani et al. 2016; Parkes et al. 2015) . While conducting LCA, material wise. After running LCA in GaBi, the inventory results were analyzed for the PPE kit. The inventory analysis for this study was based on Centrum voor Milieuwetenschappen (CML 2001-Jan. 2016) methods. The CML method is one of the strongly preferred methods followed by EDIP and Ecoindicator99 (Hand Book of Life Cycle Assessment 2018). It focuses on a series of environmental impact categories expressed in terms of emissions to the environment or resource use. The CML method groups the result into midpoint categories (Klemeš et al. 2020) , the CML impact category used in this study were: GWP, HTP, EP, A.P, FAETP, and POCP. The impact assessment of the Case-I revealed that the highest GWP impact was caused by PPE suit among all the inventories, with a total of 3,816.06 kg CO 2 eq. emission. The PPE suit is made of PP fabric resulting in emission during the manufacturing with a total of 1850 kg CO 2 eq, and additional emissions of CO 2 eq were observed through masks. The details of the impact profiles are shown in Fig. 4 . 1487.37 kg CO 2 eq. emission occurred during the incineration process of PPEs which contributed as the second-highest GWP related emissions. The GWP impact was from gloves with a total of 169.29 kg CO 2 eq. emission. The details reveal that manufacturing of gloves resulted in more GWP, due to a large amount Fig. 3 An illustration of the LCA of PPE kit of energy being consumed during its steam cracking process (Design Life Cycle 2018). The transportation by trucks for a payload of 1 ton PPE waste and 10 km travel to a disposal site, resulted in total GWP impact of 2.76 kg CO 2 eq, which is inclusive of diesel mix at the refinery. The HTP, FAETP, and AP values are also reported to be very high for PPE Suit and Mask, while negative values for incineration were observed probably due to heat recovery. Case II results are similar to case I result, except for transportation. While most of the values are same, it is to be noted that impact categories values have reduced due to reduced transportation. The benefit may seem to be minuscule for the considered case; however, the large-scale operations lead to evident differences and reduced environmental and health footprint. The results are showcased in Fig. 5 . The reduced transportation is also better due to multiple reasons other than reduced LCA-related impacts. The number of direct and indirect people handling also reduces significantly, which reduces fatalities and morbidities. Case III is analyzed with respect to cradle to grave boundaries, with grave being the landfilling of the PPE. It can be seen from Fig. 6 , the impact categories have shown a drastic increase except for GWP, which is lower due to the reduced amount of heat input in the disposal process. In case III, transportation is also included till the landfill site. The values of EP, FAETP, HTP and POCP are higher than cases I and II, while AP values seem to remain constant across all the cases. It is worthwhile to note that there is no negative value for Landfill cases except for transportation POCP, which is negligible. At present, the whole worlds are fighting a war against COVID-19 with countries implementing various measures to ensure reduced fatalities and morbidity from this novel coronavirus SARS-CoV-2. While this battle is being fought against a micro-sized With these changing habits, the use of PPEs have increased drastically, especially by medical practitioners, in order to safeguard themselves and humanity from this novel coronavirus. While the use is absolutely essential and justified, it is to be noted that disposal of these PPEs might become a problem in the near future, for which we should finding solutions today. In the current analysis, we have explored various options of disposing of these PPEs through LCA approach. Three cases with different disposal options are considered. Two of them include centralized and decentralized incineration, and one is landfill. The complete environmental footprint is considered through the cradle to grave in order to understand the detailed impact magnitude from each of the steps during the life cycle of PPEs. The results are collated and presented in Table 2 . From Table 2 , it is evident that decentralized incineration seems to be a viable option for disposal of PPEs both in terms of environment and health. The least viable option is Landfill based disposal with all impact categories on a higher side except for GWP. The decentralized incinerator has a lower footprint in terms of EP, HTP, POCP, and GWP when compared to centralized incinerators. At the same time, it produces almost similar impact in terms of AP and FAETP. Decentralized incinerator is a viable option because of additional reasons as well which are not considered in the scope of these impacts. The centralized incinerator adds number of people handling the PPEs which might be infected by SARS-CoV-2. Right from local disposal to centralized collection facility, there are additional number of people handling the waste and hence have higher chances of contracting the disease which can be avoided if decentralized systems are put in place. Considering the above, it is important to note that LCA impact categories have produced high footprint values for decentralized system as well, hence there is always a need to improve the systems at hand to reduce the overall impacts. Given the above results, it is important to create strategies of handling such type of wastes in advance given that times are changing fast and policy decisions are to be taken with speed and scientific accuracy to reduce the impact on human lives. The LCA approach in the present work has demonstrated that it can be used as an important tool in such decision making and that environmentally sound and sustainable strategies can be devised using it. Furthermore, in addition to preparing for the future with respect to increase in generation of biomedical waste, there is a need to educate people who are handling it. The pandemic has altered the waste generation dynamics, creating distress among workers involved in sanitation and policymakers. COVID-19 times have shown that microbes can be very deadly if proper hygiene is not followed, and one of the important components of hygiene is the proper handling of waste. While efforts are being made to make people understand the severity of this virus, there is a need to educate and inform these front line workers who are handling this waste as well. The results from the research can be used for decision making to plan future strategies for environmentally sound management of COVID-19 infected PPE waste. Fighting from the bottom, India's sanitation workers are also frontline workers battling Covid Municipal waste management and COVID-19 Pollution watchdog releases guidelines to handle COVID-19 biomedical waste Decentralized waste management: Analysis for residential localities of Gwalior City Solid waste management for Nagpur, feasibility study-United Nations Life cycle analysis of municipal solid waste (MSW) land disposal options in Bangalore City Exploring dependence of COVID-19 on environmental factors and spread prediction in India Valuation of air pollution externalities: Comparative assessment of economic damage and emission reduction under COVID-19 lockdown. Air Quality, Atmosphere and Health Valuation of ecosystem services and environmental damages: An imperative tool for decision making and sustainability COVID-19 pandemic and personal protective equipment shortage: protective efficacy comparing masks and scientific methods for respirator reuse COVID-19 Dashboard by the Center for Systems Science and Engineering (CSSE) at Johns Hopkins University (JHU), ArcGIS. Johns Hopkins University Annual progress report: CPCB ENVIS Centre on control of pollution (Water, Air, & Noise) /envis _annua l_repor t/Annua l%2520p rogre ss%2520r eport Guidelines for handling, treatment and disposal of waste generated during treatment/diagnosis/ quarantine of COVID-19 Patients-Revision 2 Guidelines for handling, treatment and disposal of waste generated during treatment/diagnosis/ quarantine of COVID-19 Patients COVID-19 and personal protective equipment: Treatment and prevention of skin conditions related to the occupational use of personal protective equipment Nitrile gloves: A life cycle assessment Air pollution aggravating COVID-19 lethality? Exploration in Asian cities using statistical models. Environment, Development and Sustainability Here's exactly where we are with vaccines and treatments for COVID-19 Biomedical waste management in India: Still a looming concern Personal protective equipment and Covid 19-a risk to healthcare staff? 548 doctors, nurses, paramedics infected with Covid-19 across India COVID-19 Personal Protective Equipment (PPE) for the emergency physician US Pandemic could severely strain face mask, other PPE supply pipeline In the disposal of masks and gloves, responsibility is required WWF International How the plastic industry is exploiting anxiety about COVID-19 Electrostatic properties of selected personal protective equipment regarding explosion hazard Assessing the environmental sustainability of energy recovery from municipal solid waste in the UK Disinfecting personal protective equipment with pulsed xenon ultraviolet as a risk mitigation strategy for health care workers Minimizing the present and future plastic waste, energy and environmental footprints related to COVID-19 The COVID-19 pandemic is generating tons of medical waste Understanding COVID-19 transmission, health impacts and mitigation: timely social distancing is the key Minimising the present and future plastic waste, energy and environmental footprints related to COVID-19 Electrostatic properties of selected personal protective equipment regarding explosion hazard Advisory on reprocessing and re-use of eye protection-Goggles Assessment of contribution of agricultural residue burning on air quality of Delhi using remote sensing and modelling tools Sanitation workers, attendants most vulnerable to Covid-19 among hospital staff: AIIMS study Is the world ready for the coronavirus? Distrust in science and institutions could be a major problem if the outbreak worsens State council issues guideline on regular COVID-19 prevention Requirements and technical specifications of personal protective equipment (PPE) for the novel coronavirus (2019-ncov) in healthcare settings Global shortage of personal protective equipment amid COVID-19: Supply chains, bottlenecks, and policy implications Life cycle assessment of integrated waste management systems for alternative legacy scenarios of the London Olympic Park As Covid-19 cases in district surge, so does the quantity of biomedical waste Rationing PPEs during a pandemic: The COVID-19 scenario Suggestion of life cycle impact assessment methodology: Selection criteria for environmental impact categories Protection of anesthesia providers from silent carriers of COVID-19 while minimizing disposable PPE utilization Challenges and solutions for addressing critical shortage of supply chain for personal and protective equipment (PPE) arising from Coronavirus disease (COVID19) pandemic-Case study from the Republic of Ireland Coronavirus: Mumbai waste collectors work with their bare hands. Retrieved June30 COVID-19 and personal protective equipment: Treatment and prevention of skin conditions related to the occupational use of personal protective equipment Hospital preparedness for emergency in India (Hope-I) to combat Covid-19 outbreaks Personal protective equipment and intensive care unit healthcare worker safety in the COVID-19 era (PPE-SAFE): An international survey Your used mask needs to make it to the trash can Working with the environment to protect people UNEP's COVID-19 response Challenges and strategies for effective plastic waste management during and post COVID-19 pandemic Report on health-care waste management status in countries of the South-East Asia Region Understanding air and water borne transmission and survival of coronavirus: Insights and way forward for SARS-CoV-2 Safe management of wastes from health-care activities: A summary Coronavirus disease (COVID-19) advice for the public: MythBusters Statement regarding cluster of pneumonia cases in Wuhan Report: Laboratory testing of human suspected cases of novel coronavirus (nCoV) infection COVID-19) advice for the public Rational use of personal protective equipment for coronavirus disease (COVID-19) and considerations during severe shortages Ahmedabad hospitals shell Out Rs 45/kg for disposal of Covid-19 Bio-waste Zero waste Europe statement on waste management in the context of COVID-19 The authors greatly acknowledge the support of Council of Scientific and Industrial Research (CSIR) and Director, CSIR-NEERI under the major laboratory Project Number MLP-162. The manuscript is checked for plagiarism using licensed version of iThenticate software with assigned manuscript Reference Number as CSIR-NEERI/KRC/2020/JULY/CSUM-DRC-ERMD-DIR/1 dated 04 July 2020. Publisher's Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. Harender Kumar 1 · Amaanuddin Azad 1 · Ankit Gupta 1,2 · Jitendra Sharma 3 · Hemant Bherwani 1,2 · Nitin Kumar Labhsetwar 1,2 · Rakesh Kumar 1,2 1 CSIR-National Environmental Engineering Research Institute, CSIR-NEERI, Nagpur, Maharashtra 440 020, India 2 Academy of Scientific and Innovative Research [AcSIR], Ghaziabad, Uttar Pradesh 201 002, India