key: cord-0847149-t5cwby7z authors: Visseaux, Benoit; Le Hingrat, Quentin; Collin, Gilles; Bouzid, Donia; Lebourgeois, Samuel; Le Pluart, Diane; Deconinck, Laurène; Lescure, François-Xavier; Lucet, Jean-Christophe; Bouadma, Lila; Timsit, Jean-François; Descamps, Diane; Yazdanpanah, Yazdan; Casalino, Enrique; Houhou-Fidouh, Nadhira title: Evaluation of the QIAstat-Dx Respiratory SARS-CoV-2 Panel, the First Rapid Multiplex PCR Commercial Assay for SARS-CoV-2 Detection date: 2020-07-23 journal: J Clin Microbiol DOI: 10.1128/jcm.00630-20 sha: 78fc5e1e2ae4a9f489c71d4eec190bebc61a5b47 doc_id: 847149 cord_uid: t5cwby7z In the race to contain severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), efficient detection and triage of infected patients must rely on rapid and reliable testing. In this work, we performed the first evaluation of the QIAstat-Dx respiratory SARS-CoV-2 panel (QIAstat-SARS) for SARS-CoV-2 detection. This assay is the first rapid multiplex PCR (mPCR) assay, including SARS-CoV-2 detection, and is fully compatible with a non-PCR-trained laboratory or point-of-care (PoC) testing. This evaluation was performed using 69 primary clinical samples (66 nasopharyngeal swabs [NPS], 1 bronchoalveolar lavage fluid sample [BAL], 1 tracheal aspirate sample, and 1 bronchial aspirate sample) comparing SARS-CoV-2 detection with the currently WHO-recommended reverse transcription-PCR (RT-PCR) (WHO-RT-PCR) workflow. Additionally, a comparative limit of detection (LoD) assessment was performed for QIAstat-SARS and WHO-RT-PCR using a quantified clinical sample. Compatibility of sample pretreatment for viral neutralization or viscous samples with the QIAstat-SARS system were also tested. The QIAstat-Dx respiratory SARS-CoV-2 panel demonstrated a sensitivity comparable to that of the WHO-recommended assay with a limit of detection at 1,000 copies/ml. The overall percent agreement between QIAstat-Dx SARS and WHO-RT-PCR on 69 clinical samples was 97% with a sensitivity of 100% (40/40) and specificity at 93% (27/29). No cross-reaction was encountered for any other respiratory viruses or bacteria included in the panel. The QIAstat-SARS rapid multiplex PCR panel provides a highly sensitive, robust, and accurate assay for rapid detection of SARS-CoV-2. This assay allows rapid decisions even in non-PCR-trained laboratory or point-of-care testing, allowing innovative organization. CE-marked QIAstat-Dx respiratory panel, a qualitative multiplexed nucleic acid-based test detecting 21 viruses and bacteria, recently developed and demonstrating performance similar to that of FilmArray RP1.7 (bioMérieux, BioFire) or Anyplex RV16 (Seegene) for human respiratory viruses (4, 5) . The QIAstat-Dx cartridge allows the loading of the nasopharyngeal swab (NPS) resuspended in transport medium through the liquid port or the direct insertion of the NPS into the cartridge without additional manipulation. This innovative design allows sample testing on demand in any laboratory, even in a non-PCR-trained laboratory, or as a point-of-care (PoC) test with minimal training. The QIAstat-Dx SARS version of the panel adds the detection of SARS-CoV-2 in a previously unused amplification chamber, without any change for sampling, extraction, and PCR conditions for detection of other respiratory viruses (4, 5) . As for a few other rapid PCR assays available thus far, results are provided in about 1 h, compared to the labor-intensive 3 to 4 h in the laboratory workflow of most in-house PCR assays. The comprehensiveness and versatility of the kit can potentially provide a useful tool, allowing innovative organization to test patients suspected of having coronavirus 2019 (COVID-19) rapidly and with discrimination of other respiratory pathogens. This is of importance to accelerate isolation, patient management, and treatment decisions. Here, we report the first independent validation of this new commercial PCR assay for SARS-CoV-2 detection, using clinical samples both in laboratory and in the emergency department as a point-of-care test. Analytical sensitivity analysis of the QIAstat-Dx respiratory SARS-CoV-2 panel. A preliminary sensitivity analysis was conducted using a 1:4 dilution of a SARS-CoV-2-positive nasopharyngeal sample (sample 1), presenting initial threshold cycle (C T ) values of 19.2 and 21.1 for the E and RdRp gene with the currently WHO-recommended RT-PCR assay (WHO-RT-PCR), respectively. This sample was then serially diluted 1:10 and tested with both QIAstat-Dx SARS and WHO-RT-PCR assays (3) . To further assess the comparative limit of detection (LoD) between the two methods, a second sample was quantified using a standard curve of synthetic DNA of 300 nucleotides corresponding to the amplified E gene region. A RNA transcript control, obtained from the European Virus Archive Program, was added as a positive control. The limit of detection (LoD) was determined by testing multiple replicates of serial twofold dilutions of the quantified sample. As recommended by the European Network of GMO Laboratories for LoD definition (6) , an initial dilution below the expected LoD dilution was tested, to increase the concentration until obtaining 10 out of 10 positive replicates (10/10). All dilutions were done using Virocult transport medium and kept at ϩ4°C before testing within 24 h. Briefly, for the WHO-RT-PCR, RNA was extracted from 200 l of clinical samples with the EZ1 virus minikit v2.0 (Qiagen) and eluted in 60 l. RT-PCR targeting E and Orf1 genes were performed as described by Corman et al. (3) . The QIAstat-SARS targets the same E gene region as the WHO-RT-PCR and a different region located on the Orf1 gene, both reported with the same fluorophore in a single dedicated reaction chamber. Evaluation of specificity and pretreatment conditions. To assess the specificity of the QIAstat-Dx SARS assay toward other coronaviruses and various respiratory microorganisms included in the panel, each target was assessed using pools of three positive samples obtained during the last 6 months. An evaluation of pretreatment conditions was conducted. Various conditions were tested as follows: a prelysis step with AVL buffer (Qiagen), using a 4:1 ratio of AVL buffer and NPS sample; heating, 20 min at 65°C, used for viral safety (7); and proteinase K, used 1:10 at 20 mg/ml to reduce the viscosity of induced sputum. Performance comparison using clinical samples. We included 66 nasopharyngeal swab (NPS) specimens from patients hospitalized in the Bichat Claude Bernard teaching hospital, Paris, France. Additionally, three lower respiratory samples (the earliest positive bronchoalveolar lavage [BAL] fluid sample, tracheal aspirate sample, and bronchial aspirate sample from different patients available in our laboratory) were tested to evaluate alternative off-label samples. The 69 samples tested with QIAstat-Dx were compared to the standard-of-care diagnostic method, the WHO-RT-PCR. The 3 lower respiratory samples and 23 out of the 66 tested NPS samples were used to assess the liquid sample workflow. These specimens were taken from patients suspected of having COVID-19, collected in Virocult viral transport medium (Sigma), and tested in the laboratory by adding 300 l into the liquid port of the cartridge, as recommended (central-lab samples). The remaining 42 NPS samples were collected from 42 patients suspected of having COVID-19 and tested in the emergency department. One NPS specimen was directly introduced into the swab port of the cartridge, as recommended by the manufacturer for point-of-care testing (POC samples), and as for any implementation of new PoC testing, a second nasopharyngeal swab was collected in Virocult viral transport medium and assessed in a central laboratory using the WHO-RT-PCR workflow. In case of discrepancies between the QIAstat-Dx SARS and the WHO-RT-PCR, a third method was performed (Cobas SARS-CoV-2 test; Roche). The result of the third method was not used for QIAstat-Dx SARS performance calculation. The use of respiratory viruses' multiplex PCR (mPCR) PoC testing data for research purposes was approved by the Bichat Claude Bernard ethic committee (N2019-050). All hospitalized patients, included those whose samples were used for laboratory testing, were included in the national French-COVID19 cohort, and written consent was obtained for clinical and biological substudies. Analytical sensitivity analysis of the QIAstat-Dx respiratory SARS-CoV-2 panel. All results obtained from 1:10 serial dilutions of sample 1 are depicted in Table 1 . The virus was detected for all dilutions up to 1:40,000 by both QIAstat-Dx SARS and WHO-RT-PCR methods. At 1:400,000 dilution, the virus was detected only in 5/5 and 3/5 replicates by WHO-RT-PCR and QIAstat-SARS, respectively. Regarding the LoD assessment, all the results obtained with the serial 1:2 dilutions of sample 2 around the expected LoD are depicted in Table 2 . The detection of 10/10 replicates by the QIAstat-Dx SARS was achieved for a viral load estimated at 1,000 copies/ml, i.e., for an input of 300 copies in the cartridge for QIAstat-SARS and of 16 copies/PCR for WHO-RT-PCR under our conditions. Evaluation of specificity and pretreatment conditions. No cross-reaction was detected either for human coronaviruses (229E, OC43, NL63, and HKU1, n ϭ 2 pools of three samples for each target) or for other respiratory viruses (influenza A:H1N1 virus, A:H3N2 virus, and B virus, respiratory syncytial virus, rhinovirus, parainfluenza virus 1 and 4, and human metapneumovirus; n ϭ 1 pool for each) and the bacteria included (Mycoplasma pneumoniae, Legionella pneumophila, and Bordetella pertussis, one positive sample for each). All the corresponding targets have been correctly identified in those assays. For AVL prelysis, no significant difference was observed with a nontreated sample (29.9 C T without prelysis and 30.4 C T with prelysis), and this was also true for proteinase K treatment (25.5 versus 25.5 C T ). Performance comparison using clinical samples. All results are depicted in Fig. 1 . This is the first independent validation of an mPCR assay including SARS-CoV-2 detection. Its performance and limit of detection on clinical samples are in line with the currently WHO-recommended PCR (3). The two workflows of the QIAstat-Dx respiratory SARS-CoV-2 panel, the liquid and direct swab ports, could be assessed despite a relatively low number of samples due to the available number of cartridges available for this evaluation. The LoD of the E gene was slightly higher than that previously estimated for WHO-RT-PCR (16 copies/PCR for 5 copies/PCR initially estimated [3] ) or for QIAstat-RP-nCoV (1,000 copies/ml compared to 300 copies/ml according to the manufacturer). This may be explained by the use of clinical samples in the current work instead of transcript RNA or synthetic DNA in previous estimations and different LoD estimation methods. The poor sensitivity of the WHO assay for the RdRp gene has also been reported in a recent prepublication comparing the performances of the main reference assays (8) . The sensitivity and specificity of the QIAstat-Dx SARS were excellent on clinical samples. The two positive results detected with QIAstat-SARS but not WHO-RT-PCR could be explained by low viral loads and the variability observed between the two swabs performed for PoC testing and laboratory confirmation (Fig. 1) . Multiplex assays present high reagent cost and lower number of treated samples per day than high-throughput platforms. However, multiplexing of all relevant respiratory viruses in the same cartridge allows detection of other viral infections that are part of diagnostic workflows for patients suspected of having COVID-19, especially as other viruses are cocirculating in most countries presenting SARS-CoV-2 outbreaks and may Negative Negative a The limit of detection (LoD) is defined, according to the European Network of GMO Laboratories recommandations, as the lowest content of genetic material able to be detected in all 10 replicates. QIAstat-Dx and the WHO-recommended Charité RT-PCR assay for the E gene and RdRp gene were compared. QIAstat-Dx was tested using twofold dilutions of a second positive nasopharyngeal clinical sample (strain 2) around the previously estimated LoD until obtaining 10 replicates or a failed result. The in-house assay was tested for obtained LoD values using the same viral dilution conserved at ϩ4°C, in the same 24 h. b The estimated viral load (in copies per milliliter [cp/ml]) and replicate number are shown. China Novel Coronavirus Investigating and Research Team. 2020. A novel coronavirus from patients with pneumonia in China Severe acute respiratory syndrome-related coronavirus: the species and its viruses -a statement of the Coronavirus Study Group Detection of 2019 novel coronavirus (2019-nCoV) by real-time RT-PCR Multicenter evaluation of the QIAstat-Dx respiratory panel for the detection of viruses and bacteria in nasopharyngeal swab specimens Multicenter evaluation of the QIAstat respiratory panel-a new rapid highly multiplexed PCR based assay for diagnosis of acute respiratory tract infections Verification of analytical methods for GMO testing when implementing interlaboratory validated methods: version 2 Virus inactivation by nucleic acid extraction reagents Analytical sensitivity and efficiency comparisons of SARS-COV-2 qRT-PCR assays Clinical characteristics of 140 patients infected with SARS-CoV-2 in Wuhan ED Influenza Management Study Group. 2020. Multiplex PCR implementation as point of care testing in a French Emergency Department Routine molecular point-of-care testing for respiratory viruses in adults presenting to hospital with acute respiratory illness (ResPOC): a pragmatic, open-label, randomised controlled trial The members of the ED Influenza Management Study Group are as follows: D.