key: cord-0836549-y74fqsr6 authors: Mandal, Biswajit; Vijaya Rao, V.; Karuppannan, P.; Laxminarayana, K. title: Mechanism for epeirogenic uplift of the Archean Dharwar craton, southern India as evidenced by orthogonal seismic reflection profiles date: 2021-01-15 journal: Sci Rep DOI: 10.1038/s41598-021-80965-7 sha: f364117b26847b55fade163f5353da14d0feb445 doc_id: 836549 cord_uid: y74fqsr6 Plateaus, located far away from the plate boundaries, play an important role in understanding the deep-rooted geological processes responsible for the epeirogenic uplift and dynamics of the plate interior. The Karnataka plateau located in the Dharwar craton, southern India, is a classic example for the plateau uplift. It is explored using orthogonal deep crustal seismic reflection studies, and a mechanism for the epeirogenic uplift is suggested. A pseudo three-dimensional crustal structure derived from these studies suggests a regionally extensive 10 km thick magmatic underplating in the region. It is further constrained from active-source refraction and passive-source seismological data. We interpret the Marion and Reunion mantle plume activities during 88 Ma and 65 Ma on the western part of Dharwar craton are responsible for the magmatic underplating, which caused epeirogenic uplift. Flexural isostasy related to the onshore denudational unloading and offshore sediment loading is also responsible for the persisting uplift in the region. Plate boundary forces are found to be contributing to the plateau uplift. The present study provides a relationship between the mantle plumes, rifting, development of continental margins, plateau uplift, and denudational isostasy. Combination of exogenic and endogenic processes are responsible for the plateau uplift in the region. region ( Fig. 1 ) is a part of the Archean Dharwar craton and also an uplifted region referred as the Karnataka plateau ( Fig. 2, KP) . This plateau, a part of the elevated region, is contiguous with the Deccan plateau ( Fig. 2 , DP) located to its north, which together occupies an area of more than 400,000 sq. km 10 . The Karnataka plateau is covered with Meso-Neoarchean gneisses and greenstone belts, whereas the Deccan plateau is covered with late Cretaceous (65 Ma) Deccan volcanics. Various mechanisms (cited earlier) were attributed to the plateau uplift in the region. But, there were no convincing pieces of evidence from the subsurface structural details. In the present study, orthogonal seismic reflection profiles are used to understand and suggest a mechanism of epeirogenic uplift of the Karnataka Plateau and the age of its formation. Seismic reflection studies provide great details regarding the structure and tectonic evolution of the continental crust. They are used to understand the crustal structure by traversing a profile orthogonal to the strike, thereby determining the dip of the reflector. In areas where crustal structure exhibits unpredictable three-dimensional (3-D) geometry, the two dimensional (2-D) seismic profile cannot provide the appropriate structure. In such areas, the crustal structure is accurately mapped by 3-D techniques. Even though a network of 2-D profiles or 3-D (areal) crustal seismic studies are appropriate, they are prohibitively costly. Alternatively, seismic data can be acquired in long linear main profiles, accompanied by smaller cross-profiles for limited control in the directions away from the main profile. Such a field configuration is more suitable for reconnaissance surveys of 3-D crustal structure, which will be helpful to understand the geodynamics of the region. The 3D structure also provides the opportunity to understand the relationship between profile direction and strike/dip. Seismic studies with such field configuration were carried out in the Dharwar craton to understand the broad regional structure features. Similar studies are being carried out in several areas, such as the Canadian shield 14 , the Cordillera 15 , across the Eastern Alps 16 , and NW Scotland using BIRPS data 17 . Tectonic framework. Indian shield is a mosaic of several Archean cratonic blocks, including the Dharwar craton, and sutured together with Proterozoic mobile belts between them. The Archean Dharwar craton is one of the oldest and largest Archean cratonic blocks of the world. It is a classic granite-greenstone terrain with a 3.5 Ga www.nature.com/scientificreports/ geological history 18 . The Dharwar craton is made-up of the Mesoarchean Western (WDC) and Neoarchean Eastern Dharwar Cratons (EDC). There are differences of opinion regarding the tectonic evolution and the location of the suture zone between the WDC and EDC. India was a part of the Gondwana Supercontinent during the Phanerozoic. The Gondwana supercontinent brokeup during the Mesozoic. During this process, Madagascar and Seychelles separated from India during 88 Ma and 65 Ma, respectively, due to the Marion and Reunion mantle plume activities. It has generated a passive western continental margin and Arabian sea. It has also developed asymmetric topography manifested by Western Ghats escarpment to the west and eastward draining river pattern 1 (Fig. 3) . Similarly, the separation of India from Australia and Antarctica during the Cretaceous (~ 130 Ma) has generated the eastern continental margin and the Indian Ocean (Bay of Bengal). The eastern and western continental margins developed a huge shelf area (Fig. 3) with a thick sedimentary pile due to the drainage pattern 19 . The westerly drainage consists of short rivers emanating from the Western Ghats. The Western continental margin of India is geomorphologically similar to other rifted provinces like the Parana of Brazil, Karoo of SE Africa, and Etendeka of SW Africa 1,6 . Seismic study. A DHARSEIS experiment was conducted to understand the structure, dynamics, and tectonic evolution of the Dharwar craton and to delineate the accretionary boundary between the WDC and EDC 11 . Further, it is designed to understand the mechanism of the plateau uplift in the region. It includes a 200 km long coincident deep seismic reflection and refraction/wide-angle reflection study in the NE-SW trending Perur-Chikmagalur main profile and a 66 km long reflection study along the Parasurampura-Sira N-S crossprofile, orthogonal to main profile (Fig. 1) . Seismic data were acquired during 2010-2012. The main profile was recorded across the strike, whereas the cross-profile was recorded along the strike. Elevation along the main profile varies between 1000 to 600 m and ~ 600 m along the cross profile. The seismic experiment was designed to obtain 3-D information on subsurface crustal structure across a gneissic terrain nearer to the Neoarchean suture zone. Deep crustal seismic studies along the main profile provided the subsurface crustal structure and velocitydepth model 11, 20, 21 . These studies suggested accretion of the WDC and EDC during the Neoarchean convergence based on the differences in crustal structure, the Moho geometry, and crustal thickness between them. During this orogenic process, the EDC was subducted below the WDC with a mantle suture at the eastern part of the Closepet granite (Fig. 1) . The eastern boundary of the Chitradurga greenstone belt is identified as the surface expression of the suture zone and referred to the Chitradurga Eastern Boundary Shear Zone (CEBSZ). Lack of 3-D control was hindering proper understanding of the tectonic evolution of the Dharwar craton. The crossprofile may fill the gap to some extent. During the present study, we processed the seismic reflection data from the cross-profile using the Common Reflection Surface (CRS) stack approach. We then compare these results from that of the main-profile, which was previously published by Mandal et al. in 2018 21 . The objective of the present paper is to derive a pseudo-3-D seismic image of the study area, which can be utilized to understand the implications of the plateau uplift of the region and to identify the role of profile direction on the seismic section. The present study is the first deep seismic reflection study to understand the 3-D crustal structure of the Dharwar craton. www.nature.com/scientificreports/ Seismic reflection data Data acquisition. Crustal seismic reflection data were acquired along a 200 km long Perur-Chikmagalur main profile ( Fig. 1) with an end-on field geometry using a 150-channel EAGLE-88 Radio-Frequency-telemetry acquisition system. Shots and receivers' intervals were kept at 200/100 m and 100 m, respectively. A charge size of 50-75 kg explosives was loaded with specially drilled shot holes to a depth of 25-28 m that is used as a seismic source. The data were acquired using ten 4.5 Hz geophones-string. It is recorded up to a length of 24 s with a 4 ms sampling interval. Crustal seismic reflection data were also acquired along a 66-km long N-S trending Parasurampura-Sira cross-profile ( Fig. 1) with asymmetric split-spread geometry (12 + 6 km) using a 180-channel SCORPION cabletelemetry system. Shots and receivers' intervals were kept at 200 m and 100 m, respectively. Explosives were used as a source similar to that of the main profile. The data were acquired using ten 10 Hz geophones-string with a sample interval of 2 ms and 24 s record length. More details of seismic reflection data acquisition from both profiles are shown in Table 1 . Both datasets were acquired independently. Data processing. We processed the seismic reflection data using the CRS approach. The CRS approach is another way of processing Common Mid-Point (CMP) data. It overcomes some of the limitations of the conventional CMP method. This approach considers the seismic reflection data in common reflection surface, instead of common reflection points, thereby more data are included in the stack, and signal to noise ratio (S/N) Figure 3 . Drainage pattern of peninsular India developed due to mantle plume activity shows asymmetric relief with eastward tilting from 1.5 km high Western Ghats escarpment toward the flood plains of eastwardflowing rivers. Arrows from the coast indicate the width of the continental shelf. The shelf area decreases from north to south and has an area of about 310,000 sq. km 19 in the west and 2493 km long shoreline in the east. S-Subsidence, U-uplift. Onshore denudational unloading and offshore sedimentary loading lead to subsidence (S) of the offshore continental margin. Such a huge redistribution of crustal loads leads to onshore uplift (U) due to upward flexure of the lithosphere (effect of isostatic compensation) because of rotation (shown as red colour dashed arrow) due to some form of mechanical coupling between the offshore and onshore regions. (Map is modified after Radhakrishna 9 www.nature.com/scientificreports/ increases by many folds. In the CRS approach, the data are stacked using three parameters, namely the angle of emergence (α), the radii of curvature of normal incidence point wave (R NIP ) and normal wave (R N ) [22] [23] [24] , instead of a single parameter, the stacking velocity used in the CMP method. Further, the CRS-parameters do not need a precise velocity model to stack the data, as in the case of the CMP method. Processing steps used for cross and main profiles are similar. Most of the processing steps for CMP and CRS approaches are the same, except for the stacking procedure. Again, the post-stack processing steps are the same as that of CMP. The data processing flow chart is shown in Fig. 4 . Initially, all random noises are edited, and reverse polarities of traces are corrected. Next, field geometry is applied. Static correction, bandpass filtering, spherical divergence correction, deconvolution, and automatic gain control (AGC) are applied to the field data. Then, the data are transferred to the CRS domain. In this domain, initially, coherency analysis is carried out, and the best coherency section is selected. It is used to generate an automatic CMP stack section that is a replica of the CMP stack, as found in the standard CMP technique. This automatic CMP stack is used to calculate CRS parameters (α, R NIP, R N ). Finally, the CRS stack is obtained using these parameters. The CRS-stack section is time-migrated and presented in depth using the velocity information from the coincident refraction data 11 . The conventional CMP and relatively new CRS stacking images are presented in Fig. 5a and b for comparison. The superiority of the CRS section over the CMP image is very clear. Depth migrated sections of the cross, and main profiles are presented in Fig. 6a and b to the same length. Seismic sections and interpretation. The time-migrated seismic depth section along the cross-profile, imaged in the present study, is presented in Fig. 6a . It shows mostly subhorizontal to gently dipping reflection bands at different depths, extending from 4 to 42 km. The depth of the reflectors is determined using the velocity-depth model of the coincident refraction / wide-angle reflection study along the main profile 11 . The migrated seismic depth section along the main profile 21 , the same length to that of cross-profile, is presented in Fig. 6b . A comparison is made between seismic sections from both the profiles. The main profile shows a dipping reflection fabric extending from 6 to 28 km depth that sole into prominent subhorizontal lower-crustal reflections (Fig. 6b) . The above dipping reflection fabric referred to the Chitradurga Thrust (CT) is developed by accommodating the crustal shortening during the Neoarchean convergence, subduction, and accretion of WDC and EDC 11, 21 . Contrarily, the same thrust is observed as a subhorizontal reflection band between 16 and 24 km depth in the cross-profile (Fig. 6a) . The thickness of this band is approximately the same as the width of the Chitradurga thrust at the intersection of the profiles. The difference in the crustal structure of a subsurface dipping-reflector between two orthogonal profiles is due to the profile direction with respect to the strike. Thus, the present study demonstrates the role of profile direction relative to the strike. A subhorizontal lower-crustal reflection band is observed between 30 and 40 km depth both in the cross and main profiles (Fig. 6a,b) . It is in contrast to the dipping reflector, which shows different images for the same sub-surface feature depending on the profile direction. The present data demonstrate that the linear features are unchanged, whereas dipping features in a seismic section change as derived from the orthogonal profiles. Fig. 7a -d. The dip of the reflector (Fig. 7a) remains the same in a profile orthogonal to strike (Fig. 7b) , whereas it varies as per the direction of the profiles and finally not observed along the strike direction (Fig.7c) . A gently south-dipping reflection fabric is seen from 6 to 12 km depth in the southern part from 30 to 60 km horizontal distance along the cross-profile (Fig. 6a) . The Moho along this profile is also gently dipping towards the south, with its depth changing from 40 to 42 km from north to south. In general, most of the reflections dip toward the south. Thus, with this 3-D structural control provided by cross-profile, we conclude that the structural grain of the Dharwar craton dips to the south. Epeirogenic uplift. The lower-crustal subhorizontal reflection fabric observed between 30 and 40 km depth (Fig. 5a) represents a transition zone from lower-crustal material to upper mantle material. We interpret the base of this reflection fabric as the Moho. The laminar nature of this reflection band is generated due to the accretion of the upper mantle material at the base of the crust, which is referred to as the magmatic underplating 25, 26 . A similar lower-crustal feature is also observed in several regions of the world and interpreted as magmatic underplating 11, [27] [28] [29] . A pseudo-3-D seismic section is prepared using the depth-migrated seismic images along the 130 km long Chikmagalur-Dharmapura segment of the main profile 21 and the Dharmapura-Sira, the southern part of the present cross-profile. It is presented in Fig. 8 . The 3-D crustal structure indicates that the Moho in this region is a nearly horizontal planar feature and acts as a structural detachment. The Moho in the region decouples the crust from the mantle as evidenced by the differences in the structure above and below it. Differences in rheological (mechanical) properties such as velocity, density, viscosity, and composition are responsible for the development of the detachment layer 11, 21 . Deep crustal seismic reflection data from different parts of the world indicate that the lower crust or Moho acts as a regional detachment because of its ductile characteristics (Cook and Varsek 30 ) . Further, the subhorizontal lower-crustal reflection fabric is observed along the main-profile, extending to a length of 130 km to the west of Dharmapura (Figs. 2 and 8) . It also covers a larger area along the cross-profile. www.nature.com/scientificreports/ Thus, we interpret the extensional activity observed here is a regional feature, which could not be inferred only with the earlier 2-D crustal structure. The geodynamic evolution of the Dharwar craton is shown in the form of a schematic diagram in Fig. 9 . The region experienced subduction-accretion activity between the WDC and EDC during ~ 2.5 Ga (Fig. 9b) . The post-collisional extensional processes are observed in the form of Proterozoic (2.3-2.1 Ga) mafic dyke swarms (Fig. 9c) 31 , which might be responsible for the observed lower-crustal features up to some extent. During the post-collisional extensional process, the mantle material might have intruded into the lower crust and extruded laterally, producing flattening, stretching, and layering in the ductile lower-crust. Such an ordering process manifests as a subhorizontal reworked new Moho 25,32,33 . However, later tectonic/magmatic activities of the late Cretaceous and early Tertiary period played a significant role in evolving the lower-crustal and the Moho characteristics in the region, which are discussed below. Breaking of the Gondwanaland during the Mesozoic 34 is immensely affected the structure and tectonics of the Indian shield, especially the west coast. Madagascar was separated from the western part of India with the opening Arabian sea during ~ 88 Ma due to the Marion plume activity (Fig. 9d) . This activity emplaced a large number of dykes on the west coast of India. Subsequently, Seychelles separated from India during ~ 65 Ma due to the Reunion mantle plume activities, which erupted wide-spread surface volcanism in the form of Deccan flood basalts (Fig. 9e) . The Deccan volcanic province is one of the largest flood volcanic regions of the world. The Western Ghats (WG), with 1500 km long, paralleling the west coast and elevations greater than 1 km, is one of the largest escarpments on earth (Fig. 2) . It might have formed as a rift shoulder during the rifting and breakup of Madagascar as indicated by the east-facing scarp in Madagascar is a mirror image of the west-facing scarp of the Western Ghats, India 7 . The Karnataka plateau located adjacent to the eastern part of WG (Fig. 2, KP) was also evolved during this process. It was reactivated during the separation of Seychelles from India. Some researchers suggest that the Western Ghats and the Deccan plateau, located to the north of the Karnataka plateau (Fig. 2, DP) were uplifted during the separation of Seychelles from India during 65 Ma. Even though the period of the uplift www.nature.com/scientificreports/ is debatable, it is certainly evolved between 88 and 65 Ma or the Karnataka and Deccan plateaus were uplifted respectively at ~ 88 Ma and ~ 65 Ma. During the plume activity, a part of mantle material is accreted rheologically weak lower-crust. The seismic study identified a 10 km thick mantle material in the lower crust as a regional feature (Fig. 8) . We interpret the major rifting/extensional activities related to the mantle plume episodes are responsible for the regionally extensive thick underplating in the lower-crust. The presence of thick underplated material is constrained from several other geophysical studies. The highvelocity (7.1 km/s) lower-crustal layer (Fig. 8) derived from the coincident seismic refraction study is interpreted to represent magmatic underplating in the region 11, 21 . Further, based on the identification of Seaward Dipping Reflectors (SDRs), Ajay et al. 35 have identified the west coast of India as a volcanic rifted margin. Magmatic underplating along the volcanic margin is a common phenomenon. It might be responsible for the accretion of magma at the base of the crust, which is represented by high-velocity subhorizontal lower crustal fabric. Additionally, the shear wave velocity structure derived from receiver function analysis of earthquake data suggest a high-velocity lower-crustal layer representing magmatic underplating 36 . The thickness of the underplated www.nature.com/scientificreports/ layer is ~ 3 km, ~ 11 km, and 18 km beneath the EDC, WDC, and west-coast region (see Fig. 1 for locations) . Further, 88 Ma leucogabbro dyke swarms observed on the west coast, St Mary islands, as well as in the interior of the region 37 (Fig. 8d) are the manifestation of magmatic underplating in the region and related to the Marion plume activity. The above geophysical evidence complements the underplating identified from the present study. When mafic melt from the mantle with a velocity of 8.0-8.3 km/s and density of 3.3 g/cm 3 intrudes into the ductile lower crust gets mixed up with the already existing felsic/intermediate crustal material. Such a lower crustal accretionary process is referred to magmatic underplating. Now, the lower crust exhibits higher velocity www.nature.com/scientificreports/ and density respectively of the order of 7.0-7.4 km/s and 2.9-3.1 g/cm 3 compared with earlier values. Such an additional regionally extending subsurface load disturbs the isostatic balance, which will be compensated by the surface uplift. Thus, we interpret, the magmatic underplating identified here generated isostatic uplift www.nature.com/scientificreports/ and responsible for the epeirogenic uplift in the region. Radhakrishna et al. 42 suggest igneous underplating is responsible for the plateau uplift in the region. Mantle plume/hotspot related uplift is a major tectonic process that covers 10% of the earth's surface. Many continental uplifts are associated with basaltic volcanism 43 . The width of the uplift can vary from 500 to 1000 km and 1-3 km high, as observed from several parts of the globe. Magmatic underplating is considered as a possible mechanism at several places, e.g., for the regional uplift of the Colorado Plateau 45 , the western margin of the Yangtze craton China 46 . The intrusion of the great thickness of magma into the lower-crust is generally associated with uplift, especially non-plate boundary/intraplate regions, like the Karnataka plateau 1, 4, 47 . McKenzie 4 suggests the addition of 15 km of mantle material to the lower-crust may produce 2.7 km of uplift, depending on the densities of the mantle and the accreted material. The present study, constrained from other geophysical and geological data, suggests a relationship between extension/rifting, volcanism, and uplift. The relationship between magmatic underplating and the corresponding expected elevation due to isostatic processes is provided by a simple formula 48 where, Δh is excess elevation, Δr is the thickness of the underplated layer, ρ m is the density of mantle, ρ r density of underplated layer, and ρ h density of elevated portion. The thickness of the underplated layer (Δr) derived from seismic images is 10 km. The densities of the upper mantle (ρ m ), underplated layer (ρ r ), and the elevated portion (ρ h ) are 3.31 g/cm 3 , 2.97 g/cm 3 , and 2.69 g/cm 3 respectively. They are taken from the density model derived from the velocity-depth model derived from refraction data, which were acquired along the present reflection profile 11 . Substituting these values in the above equation gives The residual (excess) topography is estimated by the difference between the expected (paleo, 1260 m) and actual (present, 600 m) elevation, which is of the order of 700 m. We interpret the discrepancy is due to the flexural response to combined onshore denudational unloading and offshore sediment loading (Fig. 3) . It is constrained from the studies by Campanile et al. 7 and Richards et al. 5 , who suggested a high rate of denudation and clastic sediment loading in the offshore basins during the Cenozoic is compensated due to flexural isostasy. Variation of elevation according to the density of the underplated layer (ρ r ) for a constant thickness of the underplated layer and mantle density is given below. Erosion is a natural process which contributes to the epeirogeny of a region. The erosional rate in the region is not constant throughout. A maximum of 4-5 km of denudation is observed in the last 150 Ma, which amounts to 26-33 m/Myr 49 . In another study using modelled thermal histories of the apatite fission track dates suggest higher rates of denudation at the beginning of Cenozoic with an increased erosion in the middle of Eocene. That data suggest3-4 km of denudation close to the coast and 1.5-2.5 km inside the continental region, which is constrained by 4 km thick sediments in the offshore Konkan-Kerala basin 50 . Numerical modelling and mass balance studies of flexural responses to onshore denudational unloading and offshore sediment loading by Richards et al. 5 and Campanile et al. 51 suggest flexural isostasy alone can't produce a significant amount of offshore sediment deposition and requires a pre-existing elevated plateau portion. The additional paleo-elevation required at the onset of denudation is provided by the magmatic underplating imaged in the present study. Plume activity may cause initial surface uplift, but the geological and geomorphological data suggest the uplift continues long after the plume effects have decayed 6 . Radhakrishna 9 suggests constructive uplift and destructive erosion are a continuous process and shaping the peninsular Indian landscape since Neogene. We opine that the longevity of the uplift from 88 Ma to the present (Figs. 2 and 8, Elevation profile) can be better explained by denudational isostasy (Fig. 3) , which provides a long-term mechanism for the continuing process of uplift. Tappe et al. 38 and Shaikh et al. 39 from the kimberlite studies on the Dharwar craton provided convincing evidence for the existence of a relatively thick lithosphere (~ 190 km) till 1.1 Ga. Subsequently, the mantle lithosphere was delaminated, leading to a thinner lithosphere (~ 120 km). Major post-1.1 Ga tectonic activity experienced by the Dharwar craton is eparation of India from the Gondwana/Pangea supercontinent during the Mesozoic. After separating from the Gondwana supercontinent, the Indian plate drifted to the north, covering a distance of ~ 7500 km with a speed of 15-20 cm/year, and collided with Eurasia forming the Himalayas at ~ 55 Ma 8 . This unique episode along with high mantle heat flux derived from the Marion and Reunion mantle plume activities, might have reduced the lithospheric thickness to ~ 110 km beneath the Dharwar craton 40, 41 . It could be possible that lithospheric thinning as observed in the region might also be expected to be present a mechanism for causing uplift in addition to the magmatic underplating. The response to the gravitational imbalance due to these activities generated isostatic uplift and formation of the plateau. Raimondo et al. 52 suggest plate-boundary stresses are transmitted over a large distance (> 1000 km) through the lithosphere, which acts as an effective stress guide. These stresses can control the tectonic evolution of the �h = �r (ρ m − ρ r ) / ρ h h = 1.26 km. Uplift, �h = 1.71 km for ρ r = 2.85 g/cm 3 , �h = 1.52 km for ρ r = 2.90 g/cm 3 , �h = 1.15 km for ρ r = 3.00 g/cm 3 , �h = 0.44 km for ρ r = 3.19 g/cm 3 . www.nature.com/scientificreports/ continental interior. Peninsular India is in a state of compression between the Himalayan collision zone in the NE and the Indian ocean ridge push 53 in the SW. Thus, we opine that the periodic uplifts may be a consequence of isostatic adjustments due to the collision of India with Eurasia (~ 55 Ma) or the slowdown in plate velocity due to this collision. It could also be due to the onset of the Indian monsoon during 15-8 Ma, which has some effect on erosion rate and modern-day uplift. Thus, we suggest that the continuation of erosion processes will lead to further exhumation, associated isostatic uplift and seismicity in the region. The plateau uplift in the region is a continuous process with flexural adjustment and could be responsible for the neotectonics activity as suggested by Valdiya 44 . Thermally driven models, such as active rifting triggered by mantle plumes, predict plateau uplift, but the uplift is transient due to expected thermal and convective decay with time. They can't explain the long-lived uplift experienced in the Karnataka plateau and other passive margins 6 . Normal upper mantle velocity beneath the plateau 11 suggests the absence of a hotter mantle, and no thermal expansion is expected. These velocities are compatible with the normal heat flow values ranging between 25 to 50 mW/m 2 with a mean value of 36 mW/m 2 , similar to many Archean terrains 54 . The Bouguer gravity values are low and vary between − 120 and − 70 mGals over the Karnataka plateau 11, 55 and are consistent with the crustal thickening. There is a positive relationship between elevation and crustal thickness, indicating the region is isostatically compensated. Airy (local) isostasy is an end-member of flexural isostasy. The entire lithosphere of peninsular India is in a state of isostatic equilibrium and that the variation of loads is entirely supported by the strength of the lithosphere 8, 56 . The pseudo-3-D crustal structure derived from orthogonal profiles identified 10 km thick subhorizontal lowercrustal fabric associated with a high-velocity (7.1 km/s) layer which is interpreted as magmatic underplating. A consequence of this process is the generation of an equilibrated younger Moho. It might have formed during the extensional/rifting process in the region. The extensional activity is identified as a regional feature based on the coverage of lower-crustal fabric to a large area both along and across the strike and on other geophysical data. Rifting and separation of the Madagascar and Seychelles from India due to the Marion and Reunion mantle plume activities during 88 Ma and 65 Ma are responsible for the wide-spread underplating, which in turn responsible for the epeirogenic uplift and formation of the Karnataka plateau. Onshore denudational unloading and offshore sediment loading and associated denudational/flexural isostasy is another important factor responsible for the plateau uplift in the region. The causes for uplift covering a vast area with different geological features are multi-genetic. We believe a single unifying explanation for the uplift may be difficult at this stage. The present study is global in nature that suggests a relationship between the mantle plumes, rifting (extension), development of continental margins, plateau uplift, and denudational isostasy. The model presented here for the evolution and persistence of elevated Indian topography may be applicable to other escarpments on the earth. The datasets generated during and/or analysed during the current study are available from the corresponding author on reasonable request. The role of mantle plumes in the development of continental drainage patterns Epeirogeny in the southern Rocky mountains region: Evidence and origin Continental delamination and the Colorado plateau A possible mechanism for epeirogenic uplift Cenozoic epeirogeny of the Indian peninsula Tertiary paleosurfaces of the SW Deccan, Western India: implications for passive margin uplift. Paleosurfaces: recognition, reconstruction and paleoenvironmental interpretation Dynamics and kinematics of rifting and uplift at the western continental margin of India, Insights from geophysics and numerical models. Sahyadri, the great escarpment of the Indian subcontinent Neogene uplift and geomorphic rejuvenation of the Indian peninsula Plateau uplift in peninsular India Crustal velocity structure of the Neoarchean convergence zone between the eastern and western blocks of Dharwar Craton, India from seismic wide-angle studies The generic mapping tools version 6 Global seafloor topography from satellite altimetry and ship depth soundings Experimental three-dimensional imaging of crustal structure in the northwestern Canadian Arctic Detailed three-dimensional structure of the deep crust based on COCORP data in the Cordillera interior, north-central Washington Cross-line recording during the seismic reflection transect in the Eastern Alps Three-dimensional mapping of seismic reflections from the crust and upper mantle, northwest of Scotland Formation of Archean (3600-2500 Ma) continental crust in the Dharwar craton, southern India The continental shelf of Western India. Continental shelves of the world: Their evolution during the last Glacio-Eustatic cycle Upper crust of the Archean Dharwar craton in southern India using seismic refraction tomography and its geotectonic implications Deep crustal seismic reflection images from the Dharwar craton, Southern India: Evidence for the Neoarchean subduction Common reflection-surface stack: A real data example Extension and Applications of the Common Reflection Surface Stack Method Deep seismic image enhancement with the common reflection surface (CRS) Stack Method: Evidence from the Aravalli-Delhi Fold Belt of Northwestern India The Mohorovic discontinuity beneath the continental crust: An overview of seismic constraints Seismic images of the continental Moho of the Indian shield Multi-genetic origin of crustal reflectivity Fine structure of the continental reflection Moho Evolution of Proterozoic Aravalli Delhi fold belt in the northwestern Indian shield from seismic studies Orogen-scale decollements Precise U-Pb dating of Paleoproterozoic mafic dyke swarms of the Dharwar craton, India: implications for the existence of the Neoarchean supercraton Sclavia The Moho in the northern Basin and Range Province, Nevada, along the COCORP 40° N seismic reflection transect Seismic and tectono-metamorphic characters of the lower continental crust in Phanerozoic areas: A consequence of postthickening extension The role of mantle plumes in continental breakup: Case histories from Gondwanaland Seaward-dipping reflectors along the SW continental margin of India: Evidence for volcanic passive margin Possible magmatic underplating beneath the west coast of India and adjoining Dharwar craton: Imprint from Archean crustal evolution to breakup of India and Madagascar Geochemistry and paleomagnetism of late Cretaceous mafic dykes in Kerala, southwest coast of India in relation to large igneous provinces and mantle plumes in the Indian ocean region Geodynamics of kimberlites on a cooling Earth: Clues to plate tectonic evolution and deep volatile cycles Clinopyroxene and garnet mantle cargo in kimberlites as probes of Dharwar craton architecture and geotherms with implications for post-1.1 Ga lithosphere thinning events beneath southern India The rapid drift of the Indian tectonic plate Imaging the lithosphere-asthenosphere boundary of the Indian plate using converted wave techniques Mechanism of rift flank uplift and escarpment formation evidenced by Western Ghats Tectonic resurgence of the Mysore plateau and surrounding regions in cratonic south India Through thick and thin: A new model for the Colorado Plateau from seismic refraction data from Pacific to Arizona crustal experiment Thick, high velocity crust in the Emeishan large igneous province, SW China: evidence for crustal growth by magmatic underplating or intraplating Large igneous provinces: Crustal structure, dimensions and external consequences The Continental Crust: A Geophysical Approach 417 Short-and Long-term denudation rates in cratonic environments: Estimates for Precambrian Karnataka (South India) Regional seismic facies analysis of western offshore India Sedimentation record in the Konkan-Kerala basin: implications for the evolution of the Western Ghats and the Western Indian passive margin Compressional intracontinental orogens: Ancient and modern perspectives Tectonic stress field in the Indian subcontinent Heat flow in the Indian shield Relation of gravity to elevation and rejuvenation of blocks in India /scientificreports/ Technology, Germany. We thank P. Sai Vijay Kumar for technical support We thank Dr. V. M. Tiwari, Director, CSIR-NGRI, for all support, encouragement, and permission to publish the work (vide reference no: NGRI/Lib/2019/Pub-60). We wish to acknowledge for constructive review by Sebastian Tappe, Editorial Board Members, and two anonymous reviewers during the difficult time of the Covid-19 pandemic. We also thank the Department of Science & Technology (DST), Govt. of India, for the research grant and the field crew for data acquisition. We also thank Prakash Kumar for encouragement. BM is grateful to F. Wenzel and J. Mann for providing the CRS code during the DAAD Fellowship at the Karlsruhe Institute of B.M. processed the data, drew the figures, participated in data acquisition and interpretation. V.V.R. planned and executed the seismic profiles, acquired and interpreted the data, wrote the paper, and provided advice during processing. P.K. and K.L. participated in processing and helped in drawing the figures. The authors declare no competing interests. Correspondence and requests for materials should be addressed to B.M.Reprints and permissions information is available at www.nature.com/reprints.Publisher's note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creat iveco mmons .org/licen ses/by/4.0/.