key: cord-0827730-p82m1g4p
authors: Belbéoch, Clémence; Lejeune, Joseph; Vroman, Philippe; Salaün, Fabien
title: Silkworm and spider silk electrospinning: a review
date: 2021-01-04
journal: Environ Chem Lett
DOI: 10.1007/s10311-020-01147-x
sha: f8ce3dc8882664834689754447b1242741b7fff3
doc_id: 827730
cord_uid: p82m1g4p

Issues of fossil fuel and plastic pollution are shifting public demand toward biopolymer-based textiles. For instance, silk, which has been traditionally used during at least 5 milleniums in China, is re-emerging in research and industry with the development of high-tech spinning methods. Various arthropods, e.g. insects and arachnids, produce silky proteinic fiber of unique properties such as resistance, elasticity, stickiness and toughness, that show huge potential for biomaterial applications. Compared to synthetic analogs, silk presents advantages of low density, degradability and versatility. Electrospinning allows the creation of nonwoven mats whose pore size and structure show unprecedented characteristics at the nanometric scale, versus classical weaving methods or modern techniques such as melt blowing. Electrospinning has recently allowed to produce silk scaffolds, with applications in regenerative medicine, drug delivery, depollution and filtration. Here we review silk production by the spinning apparatus of the silkworm Bombyx mori and the spiders Aranea diadematus and Nephila Clavipes. We present the biotechnological procedures to get silk proteins, and the preparation of a spinning dope for electrospinning. We discuss silk’s mechanical properties in mats obtained from pure polymer dope and multi-composites. This review highlights the similarity between two very different yarn spinning techniques: biological and electrospinning processes.

Textile industry is one of the most demanding industry in water (Varadarajan and Venkatachalam 2016) . But wastewater is not the only waste occurring from textile industry, indeed microplastics originating from the textile industries are pointed out as a major problem (Herbort et al. 2018; Padervand et al. 2020 ). Recent development due to COVID-19 disease, further increased this problematic. Indeed the usage of protection mask and gloves, strongly reduce the numerous effort that several country were engaged in to reduce the usage of throwaway plastics (Gorrasi et al. 2020) . In this context, why not coming back to the origin of textile and the usage of bio-sourced and therefore bio degradable material.

Especially since given proper preparation these materials are sometimes able to compete with synthetic polymers.

For millennia, arthropod (arachnids, insects and myriapods) silk has been known to humans as an exceptional biomaterial. First mentions of silkworms domestication are dated to more than 5000 years before our era, originating from Chinese regions (Yu et al. 2011; Babu 2018) . After hatching from its egg, the silkworm, still under its larvae shape, produces a cocoon to protect itself during its transformation in a moth. If a variety of silkworms are found in nature, most producing these silky structures, the main species which was domesticated and raised in industrial farms is the Bombyx mori (Guo et al. 2011) , because of the finest silks that it produces for textile applications. The material is still used today for its qualities, such as strength, luster, drapability, resilience and ability to bind with chemical dyes. But it has also been recognized for its applications in medicine. The silk market represents a huge part of the worldwide textile economy, with 120 000 tons of silk produced every year, mainly in Asia (Pereira et al. 2015) . Throughout history silkworm's threads have been used to sew wounds. From its superior mechanical resistance (stronger than collagen) (Thilagavathi and Viju 2015) , and its biocompatibility once ridden of their sericin coating (Vepari and Kaplan 2007) , several applications arose. If silk from Bombyx mori has been deeply studied thanks to its availability from to sericulture, silks from other arthropods, such as spiders, have for a long time remained confined to research. Arachnid species cannot be raised in farms because of their cannibal tendencies, but their silk, with its very specific features that combine strength and elasticity, has been in the past used as fishing lines (Vierra et al. 2011 ) and more recently as microsutures (Kuhbier et al. 2011) . The recent research infatuation with spider silk, or more accurately spider silks as the fiber declines in 7 types all with specific uses, resides in its diversity. Consequently, its potential is largely unexplored due to its scarcity. This fact made it a luxury product in our collective imagination: in 2012, artist Simon Peers and entrepreneur Nicholas Godley created a naturally golden cape made out of the silk of 1.2 million Nephila spiders, that was exposed in London (Chung et al. 2012) .

Traditionally, silk was spun by hand. After degumming the fibers, they were dried and stretched in caps and hankies, before being woven using a spinning wheel. Average productions with these methods rose to 200 g of spun silk per day and per spinner (Chakravorty et al. 2010) . In these conditions, the obtained fibers are vowed to be worked into a fabric and are therefore about half a millimeter in diameter, a common size for yarns in clothing manufacture. The final silk piece textile is a woven mat, with organized and structured fibers crossing and interlacing (Cao et al. 2008 ). This type of material has advantages, for its mechanical properties and structural resilience to shearing, but its applications are confined to clothing. In 1934, Formhals invented a new way to spin fibers, named electrospinning (Bognitzki et al. 2001 ). An electric field applied to a solution of dissolved polymer generates the sufficient tension to create a stream jet from a syringe to a collector, randomly splashing spun fibers as they dry into a nonwoven mat. The obtained fabric possesses, among other unique properties, fibers' diameters ranging from a micrometer to a few nanometers (Ramakrishna 2005) . Electrospun fibers of silkworm's threads have given nonwoven mats which combined the interests of the nanometric scale, such as high specific surface and the inherent properties of the silk, like biocompatibility, durability, strength, elasticity or a particular ability to drape (Babu 2018) . Nevertheless, silkworm's silk remains a soft polymer, that cannot compete with the synthetic fibers like aramids or polyamides when it comes to strength, or elastane for elasticity (Senthilkumar et al. 2011) . This is where spider silk has the advantage. Numerous studies show the spider silk's amazing potential in terms of mechanical possibilities. Not only does it offer a high resistance under tension and some significant elastic properties, but most importantly a versatility in these two parameters that is not met in any other polymer. It is also more durable than Bombyx's silk because degrading slowly (Vierra et al. 2011) , resistant to extreme temperatures (Babu 2018) , with piezoelectric properties (Fukada 1956 ) and biocompatible because naturally clear from sericin proteins (Karthik and Rathinamoorthy 2017) . Thanks to the diversity of uses that a spider makes of its silk, from catching preys to wrapping egg sacs, exist a variety of silks based on different proteins and with different features (Vierra et al. 2011) .

Nowadays, as engineering world tends to use a life friendly and sustainable designing approach, the development of biomaterials and respectful alternatives to synthetic polymers has become trendy. Numerous ecologically involved organizations recommend the integration of biomimicry principles in the concepts creation (Benyus 1997; Reap et al. 2005) . This implies that the inspiration to design new components could arise from Nature. Indeed, Nature has the sufficient experimental background, provided by evolution, to create optimal components. This review aims to integrate these concepts, as silk is an ancient and perfected polymer with well-studied specific applications in ecology. The applications of its properties of interest for human technologies seem like a responsible bet. The utilization of a natural material guarantees the relative safety of manipulation, since Life does not build with blocks that could not, eventually, be naturally broken down by other organisms (Green chemistry) (Kirchhoff 2003) . Morphologically, the spigots of a spider are similar to the industrial spinnerets used in textile spinning, electrospinning voltage energy providing the necessary tension to spin the fiber, as rear legs of a spider would do in nature (Das et al. 2015) . Therefore, this work endorses a critical approach on experimental procedures and their footprint on the environment.

This review provides the necessary background on the biological models and original polymer producers, focusing mainly on the silkworm Bombyx mori and the few spider's species that are met in relevant literature, Aranea diadematus and Nephila clavipes. The diverse advantages of silk fibers in contextual comparison with other bio or artificial polymers is presented in a second time and a detailed selection of experimental procedures to obtain and electrospinning of these fibers follows. Characterization and applications for electrospun silk mats in various domains, such as regenerative medicine, drug delivery, structural support, filtration, depollution and textiles are also discussed.

Silk, according to the different contexts it is used in, has many definitions. Back to its most universal, and natural approach, it is defined as a structural protein fiber synthetized by an organism for an external use (Holland et al. 2019) . It is produced by a variety of animals in nature, all part of the phylum of arthropods. All organisms producing silk originally benefited from the same genetic innovation, as the ancestral gene appeared about 400 million years ago (Chen et al. 2006 ) and diversifying ever since. This led to the variety of silk structures and properties observed nowadays. Modern species producing silk include silkworms, from the Insecta class, spiders and pseudoscorpions, from the Arachnida class and other species from the Myriapoda class (Craig 1997) . Ecologically, the silk has diverse applications, depending on the considered taxon. The chemical structure of the silk depends on its final purpose, in a form-to-function relationship (Tokareva et al. 2014) . Hence, different types of silk are observed within the different species, different individuals and different contexts. Silk therefore displays a range of mechanical properties, from adhesion to high strength, or elasticity. Nonetheless, in all organisms producing this biomaterial, the proteins are synthetized in the silk glands organs, whose walls are made of epithelial cells that release of the proto silk in the lumen under its liquid form. The polymer is then stretched, being spun out of the body through the spinnerets or spigots (Altman et al. 2003) (Fig. 1) . These glands, originally derived from the digestive tract and secreting primitive fibrous compounds, are located at different positions depending on the type of animal (Craig 1997) .

Several molecular families of silk proteins exist in arthropods. Fibroin, present in all silks, is the core protein of the fiber. It is composed of amino acids disposed in beta-sheets (crystalline domains linked by disulfuric bonds). Two-thirds of the protein are crystalline, the rest is amorphous, allowing the creation of hydrogen bonds between the amino acids (Wade 2015) . The heavy chain of the protein is an alternance of hydrophobic and hydrophilic domains, based on the nature of their amino acids. This alternance creates physicochemical interactions between the domains. That confers the resistance to the final polymer. The side chains of the protein are hydrophobic. Fibroin is observed in all arthropod silks, for it represents the essential structure of the thread and confers its strength. Another silk component, sericin is a hydrophilic protein coating the fibroin core, which provides adhesion, stickiness and hydration to the silk in silkworm species (Vepari and Kaplan 2007) . Sericin is constituted of side chains, of five different structures, that can bind to the fibroin heavy chains via their carboxyl, hydroxyl and amino groups (Numata and Kaplan 2010) . Resistance of the silk as a biomaterial originates from the elastic deformation of the beta-sheets under traction, the disulfuric bonds keeping the chain strong, while amorphous chains' hydrogen bonds are untied and reformed after the deformation (Liu et al. 2017) . In spiders, the fibroin core is not coated with sericin, but with a three-layers covering. The first layer is a skin wrapping the nanofibrils of fibroin, topped by glycoproteins and Fig. 1 Physiology of a Bombyx mori's (left) and an Aranea diadematus' (right) spinning apparatus. The silkworm uses its unique buccal spinneret to spin a single thread for its cocoon. The spider possesses five individual spinnerets and uses its rear limbs to spin the thread out of them. Each contains numerous microtubules (middle) that synthesize the nanofibrils of fibroin. Silkworms do not possess microtubules a final sheet of lipids. This assemblage provides the silk its antibacterial and antifungal properties (Romer et al. 2008 ).

The most famous and common silk encountered in literature is the silk of Bombyx mori. Its commonness is due to its ancient utilization in textile (Merrit et al. 1992 ) and numerous industrial applications. Bombyx mori is a silkworm that turns into a moth in its adult phase. This animal has been domesticated for several thousands of years for its silk, which is the raw material used for common textile silk (Merrit et al. 1992) . The Lepidoptera, still under its larvae shape, spin a single long silk thread (up to 20 µm of diameter) with adhesion and resistance properties to create its pupa: the protective cocoon in which the larvae will be transformed into an adult (Chen et al. 2012) . The silk proteins are issued from what were formerly salivary (labial) glands, that have been modified throughout evolution into silk glands (Suzuki et al. 1972) . These silk glands (one bilateral pair) extend through the whole body of the insect: the posterior part produces the fibroin core, and the middle part synthetizes the sericin. The sericin is a coating around the naked fiber. The anterior part, tighter, acts as a lumen, that will elongate the proteins and shape them into their final solid state (Laity and Gilks 2015; Takai et al. 2018) . At last, the single thread is spun from the unique buccal spinneret and will constitute the cocoon (Fig. 1 ). This thread is composed of two central clusters of numerous fibroin nanofibrils (of 20 nm each), coated with sericin (Fig. 2) . The silk of Bombyx's properties (Table 1 ) depends on the speed of spinning. A thread spun fast (27 mm/s) is more resistant to the rupture than a thread spun slowly (4 mm/s) which is more elastic. These two characteristics in the silkworm's silk can therefore not be combined in a same fiber, the thread is either strong or extensible (Shao and Vollrath 2002) . A few other silkworms, like Antheraea or Samia, also produce silks. These fibers are known as non-mulberry silk: they share a lot of similarities, their difference lying mainly in the luster of the obtained fabric.

The Arachnida class also produces silk, sharing a common ancestor with Bombyx, living 240 million years ago (according to the silk genes analysis) (Garb et al. 2010; Blackledge et al. 2012) . 37,000 species of spiders produce silk, and, unlike silkworms, their silk is designed in several declinations depending on their final utilization. Indeed, spiders such as Aranea diadematus, or Nephila clavipes, two wellstudied model species, possess not one but seven types of silk glands in their posterior abdomen. Each is responsible for the synthesis of a specific silk compound, with diverse chemical compositions and structures (Tokareva et al. 2014) . The synthesis of silk in these glands is a complex process. In the fore part of the gland, the tail, the columnar epithelial cells secrete the proteins of spider fibroin (spidroin). The proteins gather in small micelles, which avoid their aggregation before spinning because of high glandular concentrations. The micelles then migrate to the lumen, or duct, a tight S-shaped corridor in which they are elongated. The proteins are gradually organized into crystalline beta-sheets regions and amorphous chains. All along this path, the formation of the crystal sheets is facilitated by ions exchanges, and water is recapture. The elongation forces applied on the proteins also induce the solidification of the fiber, which is ready to be spun at the end of the duct (Eisoldt et al. 2011; Tokareva et al. 2014 ). In the late stages of the polymer synthesis, the microfibers are secreted outside of the body by external microtubules ( Fig. 1 ) present in the spinneret. Fibroinsecreting microtubules are numerous and about 20 nm in diameter and synthetize the core of the fiber. This core of microfibers is then coated by the glycoproteins and lipids ( Fig. 2) (Romer et al. 2008; Nentwig 2012) . The whole fiber then emerges from the spinneret and is pulled out by the rear legs of the spider (He et al. 2008) . Properties of spider threads are mentioned in Table 2 .

The seven glands of the spider do not serve the same purpose ( Fig. 3) (Vierra et al. 2011) . The ampullate major produces the dragline of the spider and some structural threads for the web, this last being also achieved by ampullate minor for radial strings. The aciniform gland synthetizes silk for prey wrapping, the cylindriform (or tubuliform) for eggs sac wrapping and the pyriform for joints (Vollrath and Knight 2001) . While building its web, the spider will pass a first and Aranea diadematus's (right). The silkworm's fiber varies between 10 and 20 µm, the spider's dragline between 3 and 5 µm. Unlike in silkworm's silk, there is no sericin in spiders' dragline, but the glycoproteins layer protects from bacterial and fungal infections (Doblhofer et al. 2015) . Nanofibrils of fibroin (in spiders and silkworms indifferently), which are between 20 and 60 nm large, are not represented at scale time to design the spiral that will catch the preys, secreting a core silk from the flagelliform gland and then a second time, to coat this core with sticky glycoproteins and lipids issued from the aggregate glands (Liu and Zhang 2014) . These different silk compounds, whom synthesis is ruled by different genes (Craig and Riekel 2002) , have different properties once secreted, the dragline and structural threads being the most resistant and stiff ones, whereas the spiral fibers will be the most elastic and sticky (Shear et al. 1989) .

Unlike silkworm silk, spider silk can achieve supercontraction: the fiber contracts above a humidity threshold. This phenomenon, associated with an increase in the ambient humidity, generates a contraction strength up to 22% of the energy necessary to break the thread (studies realized in dragline from Nephila clavipes) (Bell et al. 2002) . The fiber shrinks when wet, up to 50% of its original length, and then returns to normal after 5 min in the experimental conditions. Interestingly, the silk does not only response to humidity with supercontraction. Studies also show a cyclic contraction-relaxation of the fiber under the effect of humidity and dryness, respectively. Post supercontraction threads have a slightly higher weight and a lower stiffness (Blackledge et al. 2009 ). Biological purpose of such phenomenon is uncertain, but it may contribute to the resilience of the thread and avoid sagging (Boutry and Blackledge 2010) . Additionally, and whereas supercontraction is considered as a chemical property of the biomaterial, silk threads' tension can be modulated by liquid droplets known as elastocapillary winches. The thread can wind around the water drop, and unwind to will to damp the kinetic energy developed when stopping a flying insect, like a yo-yo, adding to the elongation potential of the web ( 

Differences between silkworm and spider's silk are previously mentioned in this review (Tables 1, 2) . A.diadematus model spider dragline's diameter is three times smaller than the cocoon thread of B.mori. Their structure also differs, in the organization of the nanofibril clusters (Fig. 2 ). Most importantly, the mechanical properties of the fibers, silkworm's thread, spider's dragline and spider's spiral thread, are highly variable. The silkworm synthetizes a thread to wrap itself in its cocoon, aiming for an insulating, protective material. The obtained fiber hence does not show an ultimate tensile strength, elasticity, stiffness or toughness as high as in spider's dragline, whose purpose is to suspend the web or the spider (Vollrath and Knight 2001) . Interestingly, the spiral thread from the spider shows an extreme elasticity, in order to catch the flying preys (Fig. 4) . Nevertheless, only the combined properties of resistance (of the dragline made by the ampulla major) and the stretchiness of the spiral thread can absorb the kinetic energy of a jumping or flying insect (Casas 2011) . Despite sharing the same density of 1.3 g cm −3 (categorized as low density polymer (Blackledge et al. 2009 )), silkworm's and spider's silks have different composition. The nature of the amino acids present in the fiber's molecular structure confers the mechanical properties to the fiber, whether it is elastic or resistant. This phenomenon is even more pronounced in spider silks. Figure 5 shows the correlation coefficient between a given amino acid and mechanical resistance or elasticity of a spider thread. A positive coefficient suggests an increase of the properties with the presence of the amino acid whereas a negative coefficient means a decrease. Finally, a coefficient close to zero implies a lack of influence of the presence of the amino acids. The dragline is mainly based on glycine, alanine, proline and glutamic acid (Andersen 1970 ): glycine and alanine have a strong influence on mechanical Fig. 3 Highlighted types of spider silk in webs and cocoons (various species). Major ampullate gland silk in frame and radial threads (a), minor ampullate gland silk in spiral thread (b), flagelliform gland silk in capture thread (c), pyriform gland silk in attachments (d), aciniform gland silk in prey wrapping (e), and cylindriform gland silk in eggsack (f). Aggregate gland silk, which coats the spiral thread, is not represented. Figure resistance's augmentation. The spiral thread is composed of glycine, proline and valine only (Andersen 1970 ): proline and valine increase the elasticity of the fiber. The adhesive coating that covers the flagelliform thread to catch insects is mostly made of glycine and proline (Andersen 1970 ). If the presence of single amino acids plays a role in the properties of the fiber, it is mainly their assemblage in clusters that provide the final mechanical profile of the fiber (Vollrath and Knight 2001) .

Silks are unique as biopolymers. They range among the rare fibers from animal origin that are used in a context similar to human activities, centered around the shape of a thread. Indeed, whereas most fibers originating from living organisms are used for structure (cellulosic fibers, collagen, elastin) or protection (keratin from wool and hairs), silks and mainly spider silks, are designed to be single strings with and Toughness (d). Dragline silk is the stiffest, toughest and the most resistant fiber, while spiral thread is significantly more elastic than any other compared fibers. For these advantages, spider threads are also thinner than silkworm's one. Graphs made from references (Pérez-Rigueiro et al. 2000; Shao and Vollrath 2002; Bonino 2003; Heim et al. 2009) 

Correlation test of Pearson between amino acid composition and mechanical properties (mechanical resistance and elasticity) of spider silks (A.diadematus and N.clavipes). A correlation test was performed between the composition in amino acids of silk issued from aciniform, cylindriform, flagelliform, ampullate major and ampullate minor glands (Andersen 1970) , and the ultimate tensile strength or strain at break for these different silks (Vollrath and Porter 2006) . A positive value indicates a correlation between the propor-tion of the amino acid and the mechanical property, a negative value suggests a correlation between the proportion of the amino acid and the other property (deleterious effect of the amino acid on the considered mechanical characteristic). Legends for the amino acids in order of mention: alanine, glycine, serine, proline, aspartic acid, glutamic acid, tyrosine, threonine, phenylalanine, valine, leucine, isoleucine, histidine, lysine, arginine the consequent behavior. Hence, their pristine mechanical properties can be compared with natural and artificial synthetic homologues.

As previously mentioned, unlike modern materials, silk is not a synthetic product. The fiber appeared in the arthropod phylum about 400 million years ago (Craig and Brunetta 2010) as a primitive secretion. The silk in the Araneae family (or in primitive Araneomorphae) started to gain its specific features, such as supercontraction, around 200 million years ago (Boutry and Blackledge 2010) . The divergence of the types of silk, namely in the spiders' family, is due to the motor of evolution: genetic lottery conferred the spun silk a variety of molecular structures that are adaptative. Not only the final structure is fit to a defined use, such as wrapping, stopping insects or suspension, but the building blocks used for its synthesis can be modulated depending on what is available in the environment. The environment and context also play roles on the final fiber obtained, which adds to the potential of the biomaterial. Humidity, building blocks, speed, substrate and orientation of spinning are all parameters that control the mechanical behavior of the thread (Swanson et al. 2009 ). Even further, spiders are believed to be capable of tailoring their filaments by post-spinning adjustments (Eisoldt et al. 2011) . The characterization and quantification of these features highlight the potential of a smart material in an identified context, an opportunity for engineering. In opposition with synthetic polymers that do not attempt to recreate the shape-to-function relationship of silk, this last is strong of millions of years of adaptations and experiences a significant modularity in its features.

Silk is a natural polymer, its composition is basically amino acids, rich in nitrogen and carbon (Andersen 1970 ). If the degradability of silk is relatively low and the material is classified like resilient against degradation, as it starts to lose its initial properties after a period varying between 60 days and 2 years depending on the context (Altman et al. 2003) . If worn silk is not recycled into a new product or if its lysis is necessary in some application, it is possible to degrade silk using organic processes, in a circular way. Some proteases, like chymotrypsin (Li et al. 2003) , can break down the fibroin core into smaller compounds whose reintegration in other building blocks will be done naturally like it is in nature. As silk is employed for regenerative medicine, its controllable and non-toxic degradation matters. Müller-Herrmann and Scheibel studied the degradation of spider silk by two bacterial proteases, with conclusive results for biomedical purposes (Müller-Herrmann and Scheibel 2015). Whether degradation is studied in order to break down cell scaffolds after tissue regeneration or to prove the biodegradability of silk for other applications, the biomaterial has the advantage of natural recyclability. In terms of green chemistry, silks, including spider silks, can replace a part of the petrol-based materials thanks to their properties, with a life cycle assessment proving its sustainability. During its synthesis process, silk is considered as an aquamelt, which means that it can be turned from a polymeric dope to a crystallized polymer in ambient temperature and water, whereas regular polymers need some heat input to do so. As so, the spinning of silk in artificial conditions saves up to 90% of the energy necessary for its shearing to reach fibrillation, last step before the final crystallization (Holland et al. 2012) . A particular example is about domestic air filters made from spider silk instead of regular synthetic fibers, which could save 9 kg of CO 2 per house and year (Lauterbach and Scheibel 2015) .

Industrial alternatives to plastics involving silks have been explored. However, the difficulty of its production, particularly for spidroins, do not allow the complete switch from synthetic material to biopolymer in the future; the applications remain extremely specific and too rare and expensive (raw material and production) for a broad use in our consuming lifestyle (Karthik and Rathinamoorthy 2017) . Only a material mimicking the structure, the molecular interactions that result in the outstanding properties of silk could be competitive, not the natural material itself. Nevertheless, biotechnological alternatives for obtention of the silk proteins in higher quantities exist and have been thriving these last decades.

Ultimate tensile strength: strong, but not the strongest Spider silk has arisen in literature as a strong, resistant fiber. Although this is true in the ecological context of the animal (webs can stop flying insects with high kinetic energy), silk is not the strongest fiber, outdone by artificial threads. Concerning Bombyx, as it has been previously described, its silk only possesses the advantage of adhesivity and ease of production (Karthik and Rathinamoorthy 2017), (Table 1) ; the material is not even ranking among high-strength fibers. Most of studies compare the spider thread issued from ampulla major, the dragline, with high resistance synthetic products such as Kevlar ® (poly-paraphenylene terephthalamide), steel, Nylon (polycaprolactam or polyamide-6) (Altman et al. 2003) . In this review, we should also compare it with other strong textile fibers like Zylon ® (poly(pphenylene-2,6-benzobisoxazole)), Vectran ® (polyarylate) or UHWPE (ultra-high molecular weight polyethylene). These selected materials are used for design of various high resistance gear, for clothing, fishing, sailing, chutes, cable reinforcement, or ballistics. Spidroin, the core of fibroin of the dragline's thread, is not as resistant as most of these filaments. Its maximal ultimate tensile strength rises up to 1.75 GPa (for certain species and under certain conditions). Zylon ® fibers endure a stress up to 5.8 GPa , Kevlar ® up to 3.62 GPa (Quintanilla) , Vectran ® up to 3.3 GPa (Ward 2012), UHMWPE fibers up to 2.8 GPa (Ogawa et al.) and stainless steel fibers up to 2.21 GPa (De Araújo 2011). However, spider silk remains more resistant than Nylon (polyamide 6), whose ultimate tensile strength rises up to 1.5 GPa (Bhattacharyya et al. 2009 ). Spider silk is a natural long thread with the original purpose of stopping insects. Given this inherent objective, one could expect silk to be the strongest of all natural fibers; however, some cellulosic structures actually prevail. Flax is the strongest fiber (maximal UTS = 2 GPa), even stronger than spider silk. Our biomaterial comes second, followed by PALF fibers (maximal UTS = 1.63 GPa), curaua fibers (maximal UTS = 1.15), ramie fibers (maximal UTS = 0.81 GPa) (Jamaluddin et al. 2019) , cotton fibers (maximal UTS = 0.8 GPa) (Yan et al.) , and wool fibers (maximal UTS = 0.17) (Yükseloğlu et al. 2015) .

We demonstrated that silk, although being a strong fiber, does not surpass synthetic filaments. However, the interest of silk and mostly of spider silk, resides in its versatility (Fig. 6) . Where other materials possess either one strong feature or another, it is possible for silk to have both a resistant and elastic (or plastic) behavior (Huang et al. 2018 ). This is a characteristic of biopolymers, that results of the chemical bonds between the chains and their structure (see Sect. 1.2): the very developed network of hydrogen bonds between amino acids in the relaxed thread and the covalent bonds between proteins in the nanocrystalline regions as a safety backup when stretched (Nova et al. 2010 ). The ratio between resistance and elasticity for silk and mostly spider silk, is unique to considered materials (Fig. 6 ). Spider silk, particularly flagelliform threads which are the most extensible, can extend up to 270% of its original length (at break), 27 for the dragline (Table 2) . For comparison with our previous high-resistance fibers, Kevlar ® 29 has a strain at break of 2.4%, UHMWPE does not elongate further than 7% (Dayyoub et al. 2019 ), Vectran ® 3.8% (Ward 2012) and Zylon ® 2.5% (Seely et al. 2004) . Nylon 6 has a strain at break reaching 16%, and steel is not considered as an elastic material (De Araújo 2011). Among the natural fibers, the exceptional elongation at break of spider silk once again dominates. Wool has a maximal observed strain at break of 44% (Thompson and Hynd 2009) , Bombyx' silk (maximum = 35%) (Asrar and Hill 2002) , PALF (maximum = 14.5%) (Yan et al. 2016) , cotton (maximum = 10%) (Yan et al. 2016) , curaua (maximum = 4.9%) (Yan et al. 2016) , ramie (maximum = 5%) (Kumar et al. 2020) , flax (maximum = 3.3%) (Yan et al. 2016) . In terms of elasticity elastane dominates that category, with an elongation at break that can reach 610% (Senthilkumar et al. 2011); however, its ultimate tensile strength is nowhere close to the high values developed in 2.2.1. Indeed, textile industry uses blends of cotton and elastane, profiting from the higher strength and comfort of cotton. Spider silk is therefore a unique material that combines both mechanical properties in one polymer. It is also interesting to mention that post treatments of silk, such as addition of aqueous glues or water coating, can increase the elasticity and the plasticity of the polymer after its spinning (Vollrath and Edmonds xxxx; Wray et al. 2011) .

We demonstrated that silk, although being a strong fiber, does not surpass synthetic filaments. However, the interest of silk and mostly of spider silk, resides in its versatility (Fig. 6) . Where other materials possess either one strong feature or another, it is possible for silk to have both a resistant and elastic (or plastic) behavior (Huang et al. 2018 ). This is a characteristic of biopolymers, that results of the chemical bonds between the chains and their structure (see Sect. 1.2): the very developed network of hydrogen bonds between amino acids in the relaxed thread and the covalent bonds between proteins in the nanocrystalline regions as a safety backup when stretched (Nova et al. 2010 ). The ratio between resistance and elasticity for silk and mostly spider silk, is unique to considered materials (Fig. 6 ).

Although common understanding around shape memory suggests the implication of metallic alloys (Huang et al. 2010) , which are mostly concerned by this property as they return to an original state after a thermal deformation, some polymers also behave as so. When twisted, the spider thread goes back to its original position, as do most of fibers like Kevlar ® or copper. But unlike these materials, who have a pendulum like movement before returning to their original equilibrium, spider silk returns to its pristine shape without oscillations thanks to its high damping coefficient. After a first torsional stress, the fiber shows a major energy dissipation (about 75%) (Liu et al. 2017 Peculiar torsion dynamical response of spider dragline silk). This absence of swinging reduces the risks of dislocations and ruptures inside the protein chains; hence, the spider thread keeps its integrity after torsion and can even endure several torsional stresses without losing its mechanical properties. Recent studies even suggest a fatigueless and superelastic behavior, where the original nanostructure and detorsion capacities remain unchanged after thousands of twisting spins per cm of thread . Number of twisting cycles at breaking point is the highest in spiral threads, followed by dragline (Kumar et al. 2020) . With this ability, spider silk can return to its original shape without any temperature modifications (Emile et al. 2006) (Fig. 7) .

Unlike other artificial polymers and even Bombyx mori's silk, spider dragline is capable of supercontraction in a humid environment (Work; Aguilar and San Román 2019). The maximum of supercontraction is reached for a dragline of Nephila clavipes at 70% of humidity. In these conditions, the thread shrinks up to 50% of its original length and generates a stress reaction up to 140 MPa. The rate of increase of the humidity in the air also plays a role in the supercontraction efficiency, an increase of 1%/s doubles the stress response from the material (in comparison with a 2%/s rate) (Agnarsson et al. 2009 ). When dry, the spider silk behaves as a glassy material: it shows a certain elastic behavior until it extends irrevocably and then breaks. This is due to the disruption of hydrogen bonds between the chains of proteins (in the amorphous regions), which can reform themselves after the tension applied on the fiber stops. When moisturized, the water plasticizes the amino acids chains and reduces the elastic modulus, which increases the elastic potential of the fiber before its plastic extension. During supercontraction, the thread is hence more extensible, slightly heavier, softened, swollen, and more ductile. This profile confers the fiber an useful feature: as a prey flies into Fig. 6 Position of diverse fibers. Are considered strong materials with an average ultimate tensile strength over 0.95 GPa, elastic materials with a strain at break over 7%. These thresholds were based on the median value of all our fibers' average numbers for each property. Of all fibers compared for their mechanical characteristics in this review, only spider silk (dragline and flagelliform threads) embodies a crossover between strength (values obtained for ultimate tensile strength), elasticity (values obtained for strain at break) and organic nature. The advantage of a bio-sourced fiber in comparison with petrolbased material, is that not only its synthesis is realized in water and without high energy input, but also its breakdown after use can be achieved in nature without toxic consequences for ecosystems. References for Kevlar ® (n = 2/2) (Quintanilla), Zylon ® (n = 3/3) (Seely et al. 2004; Kumar et al. 2002; Zhang et al. 2018; Hao et (Yan et al. 2016; Zhu et al. 2013 ) and wool (n = 3/4) (Smith et al. 2014; Yükseloğlu et al. 2015) . n: number of gathered values per mechanical property (ultimate tensile strength/strain at break) the web, the kinetic energy is better dissipated than it is in the dry material (Boutry and Blackledge 2013; Blamires and Sellers 2019) . The drying of the supercontracted fiber results in a contracted thread that shows mechanical properties similar to superior to a pristine fiber once it is relaxed back to its original length (being less stiff, more extensible, more resistant and tougher) (Guinea et al. 2005; Blackledge et al. 2009 ). If not stretched after supercontraction, fibers tend to return to their original length within a time going from a few minutes to a few hours, but remain shorter than pristine ones (Elices et al. 2011) . In spiral threads, from flagelliform glands, the changes of humidity also affect the silk, but in a different way: an increasing hygrometry swells the microscopic sticky droplets that confer the thread adhesivity (Opell et al. 2009 ), which rises the stickiness potential (Sahni et al. 2011) . Also, these moisturized droplets act like water storage on the thread, which hydrates the silk even in low humidity context. The spiral threads are thus benefiting from a perpetual supercontracted state, hence their outstanding elasticity (Vollrath and Edmonds xxxx) . Interestingly, the supercontraction happens more efficiently under a fast increase of humidity reaching the threshold of 70%, but the following air drying also generates some subsequent stress on the fibers. Blackledge et al. recorded stress peaks up to 140 MPa in Nephila threads as the humidity gradient switched from high to low (below 50%) after a first supercontraction phenomenon (Blackledge et al. 2009 ). This was characterized as a cyclic contraction process. Supercontraction is a unique property in spider silk. Artificial fibers have been designed to imitate such phenomenon, trying to reach the biomaterial's potential, with promising results (Shi and Yao 2020; Wu et al. 2018 ).

Spider silk are only completely degraded at more than 1000 °C. The material keeps its integrity at 94% until the temperature of 230 °C and then drops (Cunniff et al. 1994 ), all previous weight loss being due to water evaporation. The analysis of crystals in the fibroin chains of the spider silk under heating showed that there is a destruction in the first type of crystals from 100 °C and 350 °C for the second type in Nephila spider silk (Sheu et al. 2004 ), respectively, 250 and 260 °C for Bombyx mori's silk (Lu et al. 2011) . Moreover, the tensile behavior of the spider fiber remains almost unchanged from ambient temperature to 150 °C. Interestingly however, the ultimate tensile strength and strain at break show remarkable increases when the temperature gets negative: up to twice their potential at 25 °C when they reach − 60 °C and 63% stronger at − 196 °C than at room temperature. The toughness of the fiber is also enhanced by lower temperatures (Yang et al. 2005) . Fibers that achieved supercontraction at least once suffer molecular degradation at lower temperatures than pristine ones, with a significant difference between 350 and 450 °C (Blackledge et al. 2009 ). For comparison purposes and although these materials are used for their resistance to frictions, Nylon 6 is not degraded until 150 °C, Kevlar ® until 250 °C (Li and Huang 1999) , making Kevlar ® the closest homologue to silk. Some very high texturized fiberglass fibers like Zetex ® , or PBI (polybenzimidazole), novoloid, polyphenylene sulfide fibers, can resist temperatures between 260 °C and 1095 °C (Raheel 1994 ). However, their mechanical properties might be affected under long exposure to such heat.

Unlike most of comparable polymers, silk also shows a remarkably high thermal conductivity. As this parameter depends on the alignment of the protein chains, it also increases when the fiber is stretched, going from 349 in the relaxed state (3.9% of elongation) to 416 W m −1 K −1 (19.7% of elongation) in Nephila clavipes dragline (Huang et al. 2012) . In terms of thermal properties, spider silk hence differs from other polymers, even from silkworm's silk, who has a low thermal conductivity about 4.7 W m −1 K −1 in optimal conditions (Huang et al. 2012) , Kevlar ® (0.04 W m −1 K −1 ), or Nylon 6 (0.25 W m −1 K −1 ) (King et al. 2004 ). Only carbon nanotubes possess a largely higher thermal conductivity, reaching 6000 W m −1 K −1 (Collins and Avouris 2000) .

Silk by itself is a relatively poor conductor for electricity and can only provide scaffold fibers for other conductors (Steven et al. 2013 ). The conductivity of such an hybrid structure however depends on the relative humidity of the context, from 40% of humidity, the conductivity of the fiber will increase linearly (Steven et al. 2011) . Conductivity also depends on the coating of the thread, studies so far describe threads coated with iodine, carbon nanotubes or gold, giving possibilities for the hybrids material to ally spider silk mechanic characteristics and conductivity of well-known superconductors (Steven et al. 2011) . Both spider and Bombyx silk have been hybridized with other materials, respectively, carbon nanotubes and BEDT-TTF (based organic molecular conductor) and shown the unique properties of the silks topping the conductivity of these materials (supercontraction, elasticity, resistance, thermic properties) (Steven et al. 2014) . Spider silk's fibroin has also been used in the conception of electronical devices (memristor) for its biodegradable features and ease of preparation (Sun et al. 2015) .

Silk fibroin, as a semi-crystalline biomaterial, shows shear piezoelectricity, at a level of about 1 pC/N, 0.36 pC/N for spider fibroin (Karan et al. 2018) . For comparison, quartz shows the similar behavior with 2 pC/N (Yucel et al. 2011) and currently leading piezoelectrical material LZT or PZT (lead/plumb zirconate titanate) 100 to 1300 pC/N. Yucel et al. (Yucel et al. 2011 ) established that the abundance of crystalline structures in beta-sheets of fibroin was correlated with its piezoelectrical activity. Despite its relatively low range, silk could find applications in several domains. It figures among the several non-toxic, biodegradable and biocompatible materials that are currently used for biomedicine, like cellulose paper, PVDF (polyvinylidene difluoride) and aluminum nitride (Sappati and Bhadra 2018) . Aluminum nitride films on PET's piezoelectric response has been reported by Akiyama et al. to reach 0.7 pC/N, with application for pressure sensors, namely human pulse (Akiyama et al. 2006) . With a comparable activity and similar fits for such applications, silk could stand as an alternative: in 2018, Karan et al. worked on another type of application for spider silk: self-charging devices. The conversion of mechanical energy into electrical power through the piezoelectric behavior of spidroins has been described as remarkable and could lead to the design of nano-generator using the body natural motion to function (Karan et al. 2018 ).

Over the past decades, silkworm's silk has been studied for its biocompatibility in order to create biomaterial for tissue regeneration (Krishna et al. 2010) . The biopolymer, ridden of its sericin coating (crucial step to prevent infections and rejection (Altman et al. 2003) ), presents the qualities of a porous scaffold for cell growth. Pristine pure fibroin is relatively well accepted by the biological structures, as its presence do not trigger an immune reaction, nor does it lose its semi-crystalline structure. Its cytocompatibility is higher than synthetic tissue culture polystyrene, commonly employed for that use (Wray et al. 2011; Lerman et al. 2018 ). Spider's egg sac silk also shows advantages for biomedical uses; after enzymatic cleaning, the fibers have higher biocompatibility, can resist heavy loads (like organic tissues) (Gellynck et al. 2008 ) and keep their toughness in aqueous environments (Viney) . Both polymers, spider and silkworm's silk, have shown very slow degradation throughout time in aqueous conditions. Both also surpass some other synthetic homologues like Vicryl ® (polyglycolic acid) in the maintenance of their mechanical properties (Gellynck et al. 2008 ).

Just as we understand the exceptional potential of silk whether it is for its chemical structure, its versatile mechanical properties or its biocompatibility, various techniques are employed to create derived materials. Silks are used in gels, fibers, sponges, resins, powders, films, for also various purposes in numerous domains (Basu 2015) . Of all, electrospinning resembles our biological models the most: for the nano-spinning of a continuous fiber hardened from a liquid proteinic dope (Li et al. 2003) . Different authors even started to mimic the perfected skill of the spinning spider. Among them, in 2008, He et al. got inspired to create an electrospinning process (known as bubble electrospinning) that reproduces the spinning dope bubbles that a spider produces at the tips of the microtubules before the shearing of the fiber (He et al. 2008) . Viscosity of the spinning dope and temperature of spinning are now to be adjusted. In 2009, Jirsak et al. invented a variant method of conventional electrospinning that could produce industrial quantities of electrospun material, instead of the gram/hour quantities currently reached by the process (Jirsak et al. 2009 ). Unlike conventional electrospinning, the technique projects several silk streams at the same time, mimicking the spider's fibroin nanofibrils (Sasithorn and Martinová) . Although for now, mostly conventional electrospun silk's outcomes have been investigated, industrial and yet biomimetic production of the material might be a reality tomorrow. Additionally, electrospinning technique is most commonly used to design substrates for applications such as cell growth, protection and embedment of sensors or drugs (drug delivery). Considering the advantages of silk and their subsequent potential applications, our biopolymer's strengths and these listed applications are a functional match, electrospinning silk is therefore relevant (Kumar et al. 2018 ).

Electrospinning, unlike weaving methods, allows the obtention of large specific surface of nonwoven textile with a very thin scale, down to tens of nanometers (Bognitzki et al. 2001) . It is a technic that compiles ease of use and possibility of large-scale production. The interest of such a small level of design is that determination of porosity (and size of pores), morphology (alignment, diameter) of fibers and other emergent properties (integration of sensors) is potentially very precise (Li and Xia 2004; Agarwal et al. 2008) . Interestingly, modifying the setup of the electrospinning apparatus lead to different types of fibers, where the optical, magnetic, electronic and biological properties vary. It is even possible to use specific spinnerets to create a range of secondary structures, like hollow fibers, or cores coated with a different polymer. The electromagnetic fields that apply on the projected fiber not only reduce its diameter, but can also determine a targeted area for the textile to be locally thickened (Li and Xia 2004; Zhang and Chang 2008) . The electrospun scaffolds usually share a compatibility with biological tissues, and can even mimic histological structures, even though its applications do not stop to biopolymers (Nune et al. 2017) . Hybrid spinning dopes have already been successfully electrospun, optimizing the properties of both polymers, like bicomposites of organic and synthetic compounds (Stankus et al. 2008 ).

Electrospinning is a spinning technique using an electrical input to create a fiber from a polymer solution. Unlike regular spinning processes, this method allows the creation of scaffolds and mats with a nanometric scale (fibers and pores) (Leach et al. 2011) , regularity of the texture, outstanding surface properties and thinness of the produced material (Knapczyk-Korczak et al. 2020) .

The universal setup for electrospinning includes, as illustrated in Fig. 8 , a syringe filled with a polymer solution. The injection pump presses the solution at a defined speed, forming a droplet at the tip of the needle. A source of power creates an electrical field between the needle and the collector screen, surpassing the surface tension of the liquid droplet. This results in the formation of the Taylor cone and the projection of a nanometric fiber through the air. The fiber eventually lands in a random order on the collector (Mitchell and Tojeira; Shin et al. 2012) . While the polymer fiber is projected in the air towards the collector, the solvent that kept it in a liquid phase evaporates, reducing the diameter of the fiber to the nanometric level (Sukigara et al. 2004 ). The collector can be rotated all along the process, to create the mesh on a larger surface. External parameters while operating electrospinning influence the quality of the final spun sample. The humidity of the air and the temperature must be kept constant and monitored, thus, a confined experimental area is recommended. A flow cabinet also prevents the inhalation of toxic fumes (from the solvents) during the process (Lang et al. 2013 ).

Before electrospinning, the spinning dope must be prepared out of fibroin proteins. The obtention of these proteins varies depending on the sources (Fig. 9 ). Most of silk electrospinning protocols work with Bombyx mori silk. The polymer is directly extracted from insects' cocoons. The pupas can be bought from life sciences and The high-voltage input creates a cone of Taylor at the tip of the needle. The stream jet is propelled through the air in a random manner and stacks in a nonwoven canvas on the collector biotechnology companies, or from sericulture farms. In the case of spidroins, protocols including web harvests from live animals exist, but are rather rare (Zarkoob et al. 2003; Zhou et al. 2008) , due to the difficult production of necessary quantities as spiders do not naturally live in groups. Most of studies make use of recombinant spider fibroin, like ADF-3, ADF-4, pNSR16, MaSp1 (Peng et al. 2016) and MaSp2, that call for hosts as feedstock for silk protein production (Xu et al. 2018) . These are the proteins issued from the expression of Nephila clavipes' genes regulating the fibroin production. These genes have been transferred into silkworms' genomes so that they could synthetize their cocoon out of a silk that would have the qualities of spider silk. This recent technique, allowed by the improvement of biotechnologies and the possible combination between silkworm and spider's fibroin, is among the most efficient with more than 30% of the produced silk being spidroin (Xu et al. 2018) . Also, as the obtained product resembles a natural silkworm's cocoon, further manipulations can follow well-described protocols for Bombyx silk. However, other groups have worked with proteins issued from different vectors, like genetically modified E.coli (Leal-Egaña et al. (2011); Lang et al. 2013; Peng et al. 2016) , or other prokaryotic vectors (Zhao et al. 2017) , goat milk (Kandas et al. 2018) , yeasts or plant vectors (Vendrely and Scheibel 2007; Xu et al. 2018) , with various applications (Table 3) and (respectively decreasing) yields (Fig. 9) .

The first step in the electrospinning of a polymer, is the preparation of the spinning dope. Electrospinning of silk of Bombyx mori has been described in several studies these last decades, for the fabrication of nonwoven mats with applications in filtration or biomedicine (Vepari and Kaplan 2007) . Working from scratches, with silkworms' cocoons, the first step consists of degumming the silk, removing the sericin coating from the fibroin core. This is necessary to reach the maximal resistance features and also provides the final material more luster and softness. Degumming can be achieved through several processes, with soap (Marseille soap (Ohgo et al. 2003) ) and water, using proteases, or alkaline solution (Gulrajani 1992) , but most recent studies advise a simple boiling, at 90 °C in water for 60 min (Altman et al. 2003) . Works on Antheraea pernyi, another silkworm, suggest the use of 2.5 g/L aqueous solution of NaCO 3 , to boil three separate times the silk cocoons during 30 to 45 min (100 g of cocoons for 5L of solution) (Tao et al. 2007) . Degummed silk fibers must be dialyzed overnight in demineralized water and dried under a flow until lyophilization (possibly heated to 60 °C) (Tao et al. 2007 ).

Before electrospinning the silk fibers, it is necessary to dissolve them into a first solvent and suspend them in a second one, that will be the spinning dope. Working directly from the glands of the silkworm (studies on Antheraea mylitta), it is possible to directly dissolve and suspend fibroin proteins in a solvent, SDS (sodium dodecyl sulfate) 1% (in 10 mM Tris pH8 and 5 mM EDTA) (Mandal and Kundu 2008) . Working from degummed silk cocoons, fibroin fibers are dissolved in a solvent, like LiBr (Inouye et al. 1998 ), Ca(NO 3 ) 2 (Altman et al. 2003) , or aqueous CaCl 2 (Ayutsede et al. 2005 ) and dried and lyophilized under a flow or by heating at 60 °C (Tao et al. 2007) . After lyophilization, the fibroin sponge is dissolved in formic acid (Sukigara et al.) , possibly supplemented with small amounts of CaCl 2 (Vepari and Kaplan 2007) , or in hexafluoroisopropanol, or in HFAhydrate solution (Ohgo et al. 2003) , or simply in water (Zhou et al. 2009 ), but for short periods of time (Altman et al. 2003) . Electrospinning parameters, including dope concentration, remain at the appreciation of the operator. Changes in solvents, or slight differences in the device features can modify the outcome. It has been demonstrated, for example, that a higher concentration of the dope generates thicker fibers with less beads (Zhang et al. 2009 ).

Once solubilized, the fibroin solution is filled into the syringe for electrospinning. Bombyx mori silk is spun in a needle at a definite spinning angle. The spinning distance from the needle to the collector varies depending on uses (Table 3) , with a voltage between 10 and 35 kV (references in Table 3 ). This, however, depends on the type of solvent used for the solubilization of the fibroin and must be adjusted depending on the operator's live appreciation (Zhou et al. 2009; Leach et al. 2011) . The flow rate is set between 0.2 and 4 mL/h (Pang et al. 2019; Shehata et al. 2019) , at ambient temperature, and air humidity adjusted by the flow cabinet, remaining under 30% (Meinel et al. 2009 ). After spinning, the obtained mat is immersed in a bath of methanol or ethanol for various times (Min et al. 2004 ) and dried. The effects of these compounds and their time of application on the mechanical characteristics have been well assessed by Amiralyan et al. (Amiraliyan et al. 2010 ). This induces the crystallization of the fibers (Zhou et al. 2009; Zhang et al. 2012 ) and also reduces the porosity of the mat (Vepari and Kaplan 2007) . Another possible post-treatment implies the exposition of the mat to glutaraldehyde (GA), to modulate physico-chemical properties 

of fibers and their biocompatibility (Mohammadzadehmoghadam and Dong 2019). Sukigara et al. 2004 deeply investigated the outcoming diameters through varying the concentration of the dope and the electric field for silk electrospinning. The radiant correlation between these parameters and the obtained fiber can help choosing the best electrospinning program (Sukigara et al. 2003) . Eventually, the length of the unique spun fiber can reach over 1000 km (Amiraliyan et al. 2010 ).

Spider silk, unlike Bombyx mori's, is usually found in late researches as a recombinant protein, known as eADF4(C16). This protein originates from the genes of Araneus diadematus for fibroin synthesis, and therefore does not require a degumming treatment, since it is already lacking sericin (Lang et al. 2013; DeSimone et al. 2020) . In the rare studies where natural spider web have been used, the silk (from Agelena labyrinthica) has been rinsed several times in distilled water and then purified in acid formic at 70 °C for 7 days, before being mixed with PDLLA and electrospun (Zhou et al. 2008) . In other works, purified fibroin proteins are dissolved in hexafluoroisopropanol (Lang et al. 2013 ) possibly in addition with formic acid and hexadecyl trimethyl ammonium bromide (Shehata et al. 2019) , or 10 mM Tris/HCl pH 7.5 with addition of PEO400 (DeSimone et al. 2020). They are filled into a syringe. The basic functioning of the electrospinning device is the same as in Bombyx's silk spinning, with the following parameters: 8 to 20 cm of distance between the needle and the collector, needle voltage between 15 and 30 kV, flow rate between 0.32 and 0.4 mL/h, air humidity between 15 and 60% (Lang et al. 2013; DeSimone et al. 2020) , ambient temperature.

Here again, the parameters are up to the appreciation of the operator, for the formation of a steady cone of Taylor and a regular flow (Leach et al. 2011) . Post-treatment of the obtained mat includes spraying of ethanol for 90 min at 60 °C (Lang et al. 2013 ). In the case where PEO has been used as a stabilizing additive for the spinning, it is removable from the mat by water rinsing, as PEO is soluble in water, and spider silk is not (Shehata et al. 2019 ).

Regarding the possible applications of silk non-woven mats, a majority of them being in biomedical and regenerative medicine domains, it is important to choose solvents that are life friendly. Not only saving some detoxifying stages from the protocols, a green solvent is also safer for the user during manipulation. Some of the mentioned solvents for degumming and dissolution are mildly irritating for human skin because of their basicity and detergent potential, such as NaCO 3 or Marseille soap, or SDS, but not dangerous for environment. De Simone et al. recommended in their experiments the use of Tris/HCl buffer and PEO400 instead of hexafluoroisopropanol, because of the relative safety of manipulation of this aqueous protocol and compatibility with organic tissues without further post treatments (Desai et al. 2019; DeSimone et al. 2020; Salehi et al. 2020) . It is worth mentioning that although the use of PEO allows more stability in the viscosity parameter during the electrospinning process, its employ requires its elimination as a post treatment, through heating the mat to 100 °C, hence increasing the energy input of this protocol (Jin et al. 2004 ). Also, the use of a setup such as bubble electrospinning (He et al. 2008 ) instead of traditional electrospinning can fix some issues in this viscosity stability. Finally, formic acid, used in most of protocols as a final solvent for the spinning dope, must be used with precautions as it is corrosive for lungs, skin, eyes, etc.

Electrospun mats of Bombyx mori were successfully synthetized in literature. Reported ultimate tensile strength and strain at break were, respectively, between 13.6 and 14 MPa and between 4 and 40% (Table 4 ) (Ohgo et al. 2003) . Studies led on electrospun Bombyx mori's silk reveal that the numerous spinning parameters are affecting the final mat's features. Molecular weight of the spinning dope, solvents used, and post-spinning treatments highly influence the mechanical properties such as ultimate tensile strength and strain at break (Zhang et al. 2012) . Postspinning dipping in methanol under heating contributes to shrink the fibers and hence reduce the overall porosity of the mat, which rises to 68% (Min et al. 2004 ). Parameters of electrospinning influence the final result: distance of spinning, concentration of the dope, voltage, and flow rate affect the morphology of the fibers, including its diameter. A low concentration leads to fibers bearing beads, poorly smooth, whereas a high concentration creates continuous and uniform fibers (Min et al. 2004; Zhang et al. 2012) . Characterization of mats has not been described Fig. 9 Protocols for solubilization of silk proteins from silkworms (left) and spidroins (right). Degumming and dissolution of silk are necessary for silkworm cocoons, and very rarely observed in spider think electrospinning, as the proteins are obtained from recombinant spider silk instead of natural fibers (Table 3) . Degumming consists of washing the sericin off the silkworm's silk often achieved in an alkaline detergent solution, sericin being a glue-like protein with little biocompatibility (Altman et al. 2003) . Solvents used for preparation of the spinning dope vary depending on the type of silk: for silkworm's silk, the solvent can be formic acid or HFIP (Table 3) , but biomedical applications prefer water, for spider's silk, the organic solvent HFIP is the most used, but DeSimone et al. suggested an aqueous spinning dope based on the use of Tris/HCl (DeSimone et al. 2020). Post-treatments include vaporization or bath of methanol, water or ethanol (Min et al. 2004; Lang et al. 2013) , ◂ extensively, no more than their comparison with pristine silk's mechanical properties. Most of the studies rather focused on the efficiency of the mats in their respective applications, such as biocompatibility for example. Although natural spider silk is composed of thinner threads than Bombyx mori's cocoons, literature suggests that the minimal diameter observed in electrospun mats rises to 8 nm (Zarkoob et al. 2003) and can reach more than 1000 nm in certain spinning conditions (Table 5 ) (Zhou et al. 2008) . Here again, spinning parameters affect the fibers' final topography and therefore the few obtained results might not be the full possible spectrum. Tests realized on aligned electrospun fibers of recombinant spider's fibroin (known as MaSp1) indicate an ultimate tensile strength of 9.6 MPa, and an strain at break of 14.3% of the obtained mats. Most of studies led on electrospun spider silk actually concern composites, as engineers aims to compile the mechanical advantages of a certain material (like extremely resistant carbon nanotubes) and the diverse features of spider silk (see Sect. 2). Just like for silkworm's silk mats, mechanical characterization values have barely been reported so far.

It has been made clear (see Sect. 2.) that silk and even more spider silk possess unique properties which are employed into multiple applications. Electrospinning silk remains nevertheless a recent technology. Characterization of obtained mats is not standardized into common protocols, and it is unsure in literature if the values observed for mechanical (and other) characteristics of silk are preserved in the electrospun products, for the very structure of the fiber is modified through this method. Nevertheless, applications exist and are reviewed below.

As silk has been used for millennia to stop bleeding and wrap wounds (Salehi et al. 2020) , electrospun fibers of silkworm (Schneider et al. 2009; Wharram et al. 2010 ) and spider silk (Zhao et al. 2017 ) was tested to be an efficient material for wound dressing. The proper dressing for an open injury or a burn to heal correctly requires protection Table 4 Characteristics of non-woven mats made out of silkworm silk dope. Spider silk mats

Bombyx mori References Fiber diameter (nm) 6.5 to 6100 Zarkoob et al. (2003) ; Min et al. (2004) Zhang et al. (2009 Zhang et al. ( , 2012 Zhang et al. ( , 2014 Zhang et al. ( , 2018 ; Kandas et al. (2018) Strain at break (%) 14 to 16 Kandas et al. (2018) Porosity (%) 85 Zhao et al. (2017) from pathogen infections, gas passage, water retention, and mechanical protection. Electrospun silk mats have a relatively good oxygen permeability (a property of electrospun wound dressings), that does not prevent the supply of oxygen to the skin, necessary to the healing (Chomachayi et al. 2016) . This characteristic also prevents the proliferation of pathogenic anaerobic bacteria in the wound (Wharram et al. 2010) . Then, the high water uptake of silk, conserved in mats (Mohammadzadehmoghadam and Dong 2019), provides a moist environment for the wound. Electrospun mats are thin: about 1 mm in thickness. As their nanometric structure is close to the physiological tissues of the human body (Martins et al. 2007) , the diffusion of natural homeotic compounds such as growth factors for skin regeneration (cytokines, EGF (Schneider et al. 2009 )) is effective. Thus, the body response towards the injury is not slowed down by a hermetic barrier, while being protected by the dressing (Zhao et al. 2017 ) and protected from infections (Schneider et al. 2009 ). Interestingly, fibers' alignment randomness in mats is sometimes an obstacle to the regrowth of the organic tissues; however, method improvements for electrospinning made it possible to direct the orientation of the thread as it spreads on the collector (Sukigara et al. 2004 ).

A major number of studies mention electrospun spider silk mats as supports for cellular growth in regenerative medicine. As a natural polymer, silk is thought to conserve its potential biocompatibility (Anton and Kremer 2016) , and express properties that resemble natural tissues to some extends. In the case of cells, the growth depends on the binding on specific chemical domains, according to their hydrophobicity. Silk from certain silkworm's fibroin (like Antheraea mylitta) composition is rich in polar, acid and basic amino acids, which helps with the adhesion of the cells on the scaffolds (Mhuka et al. 2013; Melke et al. 2016) . The structure and porosity of the mats, unlike films that are usually used for wound dressing, allow the cultivated fibroblasts to thrive (Minoura et al. 1995) on 150 to 700 nm diameter meshes (Leal-Egaña et al. 2011 ) with relatively good rates: cells have an adhesion and a proliferation reaching 90% of the control plates' potential. This is due to the important specific surface of these mats: the more complex the topography (Bauer et al. 2013) , the more anchoring sites for fibroblasts' filopodia, and therefore the more proliferation (Leal-Egaña et al. 2011) . Studies led on diverse materials used for cell growth also show that over a porosity of 70%, the cellular proliferation is more efficient, hence the interest of electrospun silk (Zhao et al. 2017 ). Silkworm's silk also served has cell growth scaffolds in some work. Electrospun mats of Bombyx silk have been shown to have potential for proliferation and adhesion of osteoblasts, but still remained outdone by synthetic supports such as culture polystyrene (TCPS) (Meechaisue et al. 2007 ). In this same approach, work by Ki et al. suggested that the conception of a 3D Bombyx silk fibroin scaffold, shaped as a sphere of randomly organized electrospun fibers, was more efficient in terms of cell adhesion and proliferation, these parameters also affected by a higher porosity (94%) (Ki et al. 2008; Park et al. 2010 ).

The peculiar versatility of spider silk is used in several experiments as a strong and elastic prosthesis to replace fascia, in hernia repair. When compared with commercial synthetic homologues, the Nephila's silk woven mat has shown a remarkable integration in the organic tissues, with a lower inflammatory response, better durability of mechanical properties, and complete degradation observed after the healing of the wound (Schafer-Nolte et al. 2014) . Even though applications with non-woven mats are not yet a reality, the biocompatibility results of spider silk is encouraging, while prospecting for potential non-woven meshes applications. Bombyx mori's silk, however, has already been used as an electrospun matrix to reconstruct damaged organic structures, such as blood vessels. Tubular scaffolds mimicking arteries with mechanical properties overtaking original models were successfully conceived by Soffer et al. (Soffer et al. 2008 ) and others (Steiner et al. 2019) . With an ultimate tensile strength reaching up to 125% of an artery's potential and an average burst pressure of 811 mmHg, far over the biological standard of 100 mmHg (Guyton 1991) , these materials are very promising. Growth of endothelial and muscle cells have been observed to proliferate on the tubular scaffold. It makes it in an efficient support for grafts (Soffer et al. 2008) . Bone tissues have also been grown on Bombyx fibroin electrospun mats, with a significantly higher proliferation of the osteoblasts on these scaffolds than on PLA synthetic homologues, which should contribute to the techniques of bone damage repairs and bone defect regeneration in future medical practices (Kim et al. 2005 ). These last years, Pawar et al. have been working on nerve guidance conduits made out of electrospun spider silk and collagen hybrid tubes. The peripheric tissues have shown excellent compatibility with cell growth and differentiation, the cells being able to achieve functional neuronal activity. Recombinant spider silk provided the anti-inflammatory barrier to the collagen compounds, while allowing the passage of nutrients and gas exchanges (Pawar et al. 2019; Salehi et al. 2020 ).

Drug delivery is a complex process, as the efficiency of the drug depends on the accuracy of the targeted organic structure, and the diffusion rate of the medication. Recent advances in this domain have aimed to embed drug compounds in vector-like entities, based on the chemistry and kinetics of their degradation. Fibroin proteins have the capacity to retain a chemical compound and release it in the targeted organ at a controllable rate, which depends on its degree of crystallinity. The drug, sequestrated into the chains of the silk proteins, is only available for diffusion after their degradation. A higher crystallinity of the fiber implies a slower degradation by body enzymes, which releases the drugs embedded in the amorphous zones of the silk at a slower rate. Since the crystallization of silk fibers in electrospun mats can be largely controlled by vapor treatment, the delivery rate can therefore be defined (Pignatelli et al. 2018 

As a biopolymer with mechanical properties comparable with petrol-based materials to some extent, but with its organic and recyclable nature in addition, fibroin fibers employ in similar applications have been investigated. Engineering project led by Lang, Jokisch and Scheibel used electrospun fibers of recombinant A.diadematus fibroin to create an air filter device. The mat, composed of fibers of 80 to 120 nm of diameter, filtered particles of very small size, under the micrometric scale. The interest of electrospinning in this example is the regularity of the obtained mat: as the filter is composed of several layers of small-scaled meshes, the uniformity of the mat is high, and the risk of defects in the device is decreased (Lang et al. 2013; Jokisch et al. 2017) . Another recent example of utilization of electrospun silkworm's fibroin is the insertion of TiO 2 nanoparticles in the silk mat for pesticide degradation. Silk, unlike numerous artificial alternatives, does not eventually break down into toxic compounds like microplastics in water. It also ensures the durable entrapment of TiO2 nanoparticles in the scaffold to avoid their release in nature. The mats were electrospun and atomized with the titanium dioxide, and their capacity to photocatalyze a selection of pesticides when placed in polluted water was assessed. Tests showed a promising photooxidation of the pesticides, and a good durability of the mats' degradation rate in time, ensuring their reusability (Aznar-Cervantes et al. 2020) . In this application, silk provides an adequate support for TiO 2 , as the presence of TiO 2 in silk mats of films has also been observed to increase the crystallization of silk, tightening the meshes around the particles (Feng et al. 2010) . Moreover, fibroin is compatible with the photoactivity of the compound, and safe for its potential contexts of utilization in depollution.

In some applications, electrospun silk scaffolds are used for their relative strength and elasticity, potentially conserved at the nanometric scale. Their implementation into composites constitutes the support structure for other polymers with different (and often complementary) properties. Lately, mixing (not necessarily electrospun) silk and carbon nanotubes has offered a variety of applications for e-textiles and sensors. Ye et al., for example, have proofed that such a composite yarn conserved the properties of silk, previously described and of carbon nanotubes. Fabrics made out of this material are sensitive to their environmental parameters, such as electrical conductivity, thermal variations, or mechanical forces (Ye et al. 2019) . This trend and its applications were explored using electrospinning. Studies led by Ayutsede et al. (Ayutsede et al. 2006) suggest the combination of the extreme strength of carbon nanotubes and Bombyx mori's silk fibers through electrospinning, to increase the Young's modulus of the carbon nanostructure. In another work on the same type of silk, scaffolds of silk fibroin coated with polypyrrole, an organic polymer used for its electrical conductivity, showed the same conductivity as free-standing polypyrrole, for an enhanced strain at break and rupture strength, an opportunity for their use in regenerative medicine (Aznar-Cervantes et al. 2012) . Unlike with spinning methods, these electrospun scaffolds benefit from a greater precision and uniformity in their design for applications at a lower and more delicate scale, like biomedicine.

As for drug delivery or particles embedment, electrospun silk scaffolds can be implemented with a variety of compounds. These compounds often possess a specific activity that is the core of the considered application, however, without the support of the fibroin fibers, this activity could not be displayed in certain environments or on long-term. This is the case in textiles, for example, some compounds with reactions of interest under UV light cannot be implemented in regular fabrics or their activity maintained; however, the function is preserved in electrospun silk mats. Among these applications, the embedment of TiO 2 and SiO 2 in textiles is well-known to protect the fibers from UV, and accelerate the photodegradation of staining compounds such as wine or coffee on fabrics (Kirstein 2013) . A self-cleaning composite of electrospun silkworm's fibroin, polyvynil alcohol (PVA) and titanium dioxide has been designed by Wu et al. (2018) . In another work, Pang et al. 2019 have successfully electrospun silkworm's fibroin and three different fluorescent dyes in three blends. Using rhodamine, acridine orange or fluorescent sodium solubilized in the fibroin dope, they created samples of silk with applications as strips or icons shining under UV lights, for implementation on textiles.

Obtained fluorescent colors ranged from the dark red to the bright yellow-green, depending on the concentration and the type of dye (Pang et al. 2019 ). Kandas et al. pursued the same goal in 2018 and created a spider silk electrospun mat embedded with cerium oxide, metallic nanoparticles with fluorescent properties. After exposure under UV, the mat emitted a green light, and its electrical conductivity behavior changed depending on the humidity conditions and surrounding media, which grants the material potential applications in intelligent textiles (Kandas et al. 2018 ).

Silk, the ancient natural fiber, has conquered far more than the textile market. These last decades of research have revealed the secrets of its nature, displaying the unique structure of fibroin: a semi-crystalline long chain of amino acids, whose modular chemical bonds ensure both significant strength against rupture, and outstanding elasticity. The biomaterial, evolutionarily selected for these qualities, can withstand huge strain forces with remarkable resilience and be adapted to its contexts of use with a surprising versatility. Whereas silkworm silk is an acclaimed fiber for its biocompatibility, its availability and ease of manipulation, the most inspiring of silk is probably spider silk. Spidroin exhibits mechanical behavior that compete with high-performance material for its high strength, elasticity, biocompatibility, durability and low density: not so for its scores in these characteristics, but for the unique completeness of its profile. Moreover, this biopolymer is capable of behavior like no artificial fiber possesses, like supercontraction, and tailoring of properties using water. New applications even emerge to make use of silk's piezoelectricity and thermal properties. Numerous researches have worked with silks under their pristine or regenerated form, including electrospinning. The technique has the advantage of spinning mats with a nanometric scale: a chance to design scaffolds with specific topographies or compound embedment. Preparing an electrospinning dope out of fibroin is not always a simple process, for the obtention of the protein passes by the harvest and treatment of natural silk (a painstaking step for unfarmable spiders), or regeneration through genetically modified vectors. Spinning protocols however have been well defined in literature to create mats for a variety of applications. However, it is so far unclear whether the properties of natural silk have been fully retrieved in the final silk mats. Among their purposes, the biomedical applications rank as first. Electrospun fibroin mats have been effectively designed for cell growth, for their structure and the biocompatibility of silk provide the best culture environment. With similar outcomes, wound dressing has also experimented fibroin mats, the biological yet antibacterial nature of the silks complying with the human healing pathways. As a scaffold with nanoscopic pores that breaks down into harmless compounds at a well-understood rate, silk mats also make efficient carriers for drug delivery. A few other applications out of the medical domain exist, but they are rather remote. Electrospun mats have been used as support for more fragile polymers with value. The objective is to throw the properties of both into one composite. If the silk scaffold is necessary to the resilience of the overall nanoscopic device, its potential as a biopolymer is not fully exploited. It is safe to conclude that electrospinning silk, from silkworm or spider, is relevant for biomedical purposes, and so confirm the extending number of publications in that domain. Indeed, the scarcity of the material is compensated by the specific match between biomaterial's properties, spinning technique, and scale and context of application. However, for other applications, such as filtration, textile, or composites with various uses, electrospinning silk remains controversial. These frameworks can difficultly make use of more than one interest of our electrospun biomaterial's, because alternatives are ready and available, surpassing a biopolymer's limits, and the biomimetic feature with promises of recyclability and life-friendliness cannot offset this in the current market. Nevertheless, spinning and production techniques set aside, silk's potential remain significant for the right application. The polymer has an undeniable future in medical domains, and the growing visibility of both this material and electrospinning technique should certainly inspire numerous projects in the years to come.

Use of electrospinning technique for biomedical applications

Supercontraction forces in spider dragline silk depend on hydration rate

Smart polymers and their applications

Flexible piezoelectric pressure sensors using oriented aluminum nitride thin films prepared on polyethylene terephthalate films

Silk-based biomaterials

Structural characterization and mechanical properties of electrospun silk fibroin nanofiber mats

Amino acid composition of spider silks

Spider silk and its application in technology and medicine

Biosynthetic processes for linear polymers

Blueprint for a highperformance biomaterial: full-length spider dragline silk genes

Regeneration of Bombyx mori silk by electrospinning. Part 3: characterization of electrospun nonwoven mat

Carbon nanotube reinforced Bombyx mori silk nanofibers by the electrospinning process

Fabrication of conductive electrospun silk fibroin scaffolds by coating with polypyrrole for biomedical applications

Electrospun silk fibroin/TiO2 mats. Preparation, characterization and efficiency for the photocatalytic solar treatment of pesticide polluted water

Silk: processing, properties and applications

Advances in silk science and technology

Controllable cell adhesion, growth and orientation on layered silk protein films

Supercontraction stress in wet spider dragline

Biomimicry: innovation inspired by nature

How super is supercontraction? Persistent versus cyclic responses to humidity in spider dragline silk

Sequential origin in the high performance properties of orb spider dragline silk

Modelling temperature and humidity effects on web performance: implications for predicting orb-web spider (Argiope spp.) foraging under Australian climate change scenarios

Nanostructured fibers via electrospinning

Material properties of spider silk

Evolution of supercontraction in spider silk: structure-function relationship from tarantulas to orbweavers

Wet webs work better: humidity, supercontraction and the performance of spider orb webs

Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results

Spider physiology and behaviour: behaviour

Sericulture and traditional craft of silk weaving in Assam

The spinning processes for spider silk

Silk cocoon (Bombyx mori): multi-layer structure and mechanical properties

Electrospun silk-based nanofibrous scaffolds: fiber diameter and oxygen transfer

Recent advances in production of recombinant spider silk proteins

Organic fibers. In: Peters ST (ed) Handbook of Composites

Nanotubes for electronics

Evolution of arthropod silks

Spider silk: evolution and 400 million years of spinning, waiting, snagging, and mating

Comparative architecture of silks, fibrous proteins and their encoding genes in insects and spiders

Mechanical and thermal properties of dragline silk from the spider Nephila clavipes

Application of biomimicry in textiles

The structure and mechanical properties of the uhmwpe films modified by the mixture of graphene nanoplates with polyaniline

In: Fangueiro R (ed) Fibrous and composite materials for civil engineering applications

Application of Biolayer Interferometry for Studying Protein-Protein Interactions in Transcription

Aqueous electrospinning of recombinant spider silk proteins

A quantitative analysis of the supercontraction-induced molecular disorientation of major ampullate spider silk

To spin or not to spin: spider silk fibers and more

Structural Origin of the Strain-Hardening of Spider Silk

Decoding the secrets of spider silk

The hidden link between supercontraction and mechanical behavior of spider silks

Biopolymers: shape memory in spider draglines

Study on the properties of Nano-TiO2 particles modified silk fibroin porous films

On the piezoelectric effect of silk fibers

Untangling spider silk evolution with spidroin terminal domains

Biocompatibility and biodegradability of spider egg sac silk

Back to plastic pollution in COVID times

Stretching of supercontracted fibers: a link between spinning and the variability of spider silk

Degumming of silk

Nucleotide diversity and selection signature in the domesticated silkworm, Bombyx mori, and wild silkworm

Blood pressure control-special role of the kidneys and body fluids

Thermal, mechanical, and microstructural study of PBO fiber during carbonization

BioMimic fabrication of electrospun nanofibers with high-throughput

Spider silk: from soluble protein to extraordinary fiber

Alkoxy-silyl induced agglomeration: a new approach for the sustainable removal of microplastic from aquatic systems

Silk and synthetic polymers: reconciling 100 degrees of separation

The biomedical use of silk: past, present Future

Shape memory materials

New secrets of spider silk: exceptionally high thermal conductivity and its abnormal change under stretching

Silkworm silk-based materials and devices generated using bio-nanotechnology

Use of Bombyx mori silk fibroin as a substratum for cultivation of animal cells

Comparison of tensile properties between natural fibres and inorganic fibres for strengthening timber structures

Human bone marrow stromal cell responses on electrospun silk fibroin mats

Method of nanofibres production from a polymer solution using electrostatic spinning and a device for carrying out the method

Optical fluorescent spider silk electrospun nanofibers with embedded cerium oxide nanoparticles

Nature driven spider silk as high energy conversion efficient bio-piezoelectric nanogenerator

Sustainable silk production

Development of 3-D nanofibrous fibroin scaffold with high porosity by electrospinning: implications for bone regeneration

Biological efficacy of silk fibroin nanofiber membranes for guided bone regeneration

Electrically and thermally conductive nylon 6,6

Promoting green engineering through green chemistry

Fiber-based composite meshes with controlled mechanical and wetting properties for water harvesting

Absorbable polymeric surgical sutures: chemistry production, properties, biodegradability, and performance

First investigation of spider silk as a braided microsurgical suture

Fatigueless response of spider draglines in cyclic torsion facilitated by reversible molecular deformation

Synthesis, structure, and properties of PBO/SWNT composites & Macromolecules

Optically probing torsional superelasticity in spider silks

Electrospinning production of nanofibrous membranes

Investigation of mechanical and viscoelastic properties of flax-and ramie-reinforced green composites for orthopedic implants

Rheological behaviour of native silk feedstocks

Air filter devices including nonwoven meshes of electrospun recombinant spider silk proteins

Life cycle assessment of spider silk nonwoven meshes in an air filtration device

Electrospinning fundamentals: optimizing solution and apparatus parameters

Interactions of fibroblasts with different morphologies made of an engineered spider silk protein

The evolution of polystyrene as a cell culture material

Thermal degradation of Kevlar fiber by high-resolution thermogravimetry

Electrospinning of nanofibers: reinventing the wheel?

Enzymatic degradation behavior of porous silk fibroin sheets

Biomimicry via Electrospinning

Silk fiber-molecular formation mechanism, structure-property relationship and advanced applications. Oligomerization

Peculiar torsion dynamical response of spider dragline silk

Degradation mechanism and control of silk fibroin

A novel method for dissolution and stabilization of non-mulberry silk gland protein fibroin using anionic surfactant sodium dodecyl sulfate

Electrospun nanostructured scaffolds for tissue engineering applications

Preparation of electrospun silk fibroin fiber mats as bone scaffolds: a preliminary study

Optimization strategies for electrospun silk fibroin tissue engineering scaffolds

Silk fibroin as biomaterial for bone tissue engineering

National Museum of American History Mhuka V, Dube S, Nindi MM (2013) Chemical, structural and thermal properties of Gonometa postica silk fibroin, a potential biomaterial

Electrospinning of silk fibroin nanofibers and its effect on the adhesion and spreading of normal human keratinocytes and fibroblasts in vitro

Attachment and growth of fibroblast cells on silk fibroin

Role of Anisotropy in Tissue Engineering

Fabrication and Characterization of Electrospun Silk Fibroin/Gelatin Scaffolds Crosslinked With Glutaraldehyde Vapor

High strength natural fibers for improved polymer matrix composites. Materials Science Forum

Enzymatic degradation of films, particles, and nonwoven meshes made of a recombinant spider silk protein

Ecophysiology of spiders

Molecular and nanostructural mechanisms of deformation, strength and toughness of spider silk fibrils

Silk-based delivery systems of bioactive molecules

Electrospinning of collagen nanofiber scaffolds for tissue repair and regeneration

Mechanical properties of ultrahigh-molecular-weight polyethylene fiber-reinforced PE composites

Preparation of nonwoven nanofibers of Bombyx mori silk, Samia cynthia ricini silk and recombinant hybrid silk with electrospinning method

Daily and seasonal changes in the stickiness of viscous capture threads in Argiope aurantia and Argiope trifasciata orb-webs

Removal of microplastics from the environment

Fabrication of silk fibroin fluorescent nanofibers via electrospinning

Electrospun silk fibroin scaffolds with macropores for bone regeneration: an in vitro and in vivo study

Recombinant spider silk and collagen-based nerve guidance conduits support neuronal cell differentiation and functionality in vitro

Recombinant spider silk from aqueous solutions via a bio-inspired microfluidic chip

Bombyx mori silk fibers: an outstanding family of materials

Mechanical properties of single-brin silkworm silk

Electrospun silk fibroin fibers for storage and controlled release of human platelet lysate

Microstructure and properties of random heterogeneous materials: A review of theoretical results

Protective clothing systems materials

An introduction to electrospinning and nanofibers

Alignment of carbon nanotubes and reinforcing effects in nylon-6 polymer composite fibers

Holism, biomimicry and sustainable engineering

The elaborate structure of spider silk: structure and function of a natural high performance fiber

Changes in the adhesive properties of spider aggregate glue during the evolution of cobwebs

Spider silk for tissue engineering applications

Piezoelectric polymer and paper substrates: a review

Fabrication of silk nanofibres with needle and roller electrospinning methods

Biomechanics and biocompatibility of woven spider silk meshes during remodeling in a rodent fascia replacement model

Biofunctionalized electrospun silk mats as a topical bioactive dressing for accelerated wound healing

Elastane fabricsa tool for stretch applications in sports

Surprising strength of silkworm silk

A devonian spinneret: early evidence of spiders and silk use

Spider silk fibers: synthesis, characterization, and related biomedical applications

Lattice deformation and thermal stability of crystals in spider silk

A simple process for making supercontraction fiber from polycaprolactone/elastomer blends

A short review: recent advances in electrospinning for bone tissue regeneration

Mechanical properties of wool and cotton yarns used in twenty-first century tapestry: Preparing for the future by understanding the present

Silk-based electrospun tubular scaffolds for tissue-engineered vascular grafts

Hybrid nanofibrous scaffolds from electrospinning of a synthetic biodegradable elastomer and urinary bladder matrix

Intrinsic vascularization of recombinant eADF4(C16) spider silk matrices in the arteriovenous loop model

Physical characterization of functionalized spider silk: electronic and sensing properties

Carbon nanotubes on a spider silk scaffold

Silk/nano-material hybrid: properties and functions

Regeneration of Bombyx mori silk by electrospinning-part 1: processing parameters and geometric properties

Regeneration of Bombyx mori silk by electrospinning. Part 2. process optimization and empirical modeling using response surface methodology

Nonvolatile bio-memristor fabricated with natural bio-materials from spider silk

The genes for silk fibroin in Bombyx mori

The evolution of complex biomaterial performance: the case of spider silk

Silkworms suppress the release of green leaf volatiles by mulberry leaves with an enzyme from their spinnerets

Single bumper shields based on vectran fibers

Structure and properties of regenerated Antheraea pernyi silk fibroin in aqueous solution

Combining flagelliform and dragline spider silk motifs to produce tunable synthetic biopolymer fibers

Silk as a suture material

Stress-strain properties of individual Merino wool fibres are minor contributors to variations in staple strength induced by genetic selection and nutritional manipulation

Structure-function-property-design interplay in biopolymers: spider silk

Sustainable textile dyeing processes

Biotechnological production of spidersilk proteins enables new applications

Silk as a Biomaterial

Spider silk composites and applications. In: Cuppoletti J (ed) Metal, ceramic and polymeric composites for various uses

From natural silks to new polymer fibres

Modulation of the mechanical properties of spider silk by coating with water

Liquid crystalline spinning of spider silk

Spider silk as archetypal protein elastomer

Wound healing: cellular mechanisms alternative therapies and clinical outcomes

Dimensions, birefringences, and force-elongation behavior of major and minor ampullate silk fibers from orb-web-spinning spiders-the effects of wetting on these properties

Effect of processing on silkbased biomaterials: reproducibility and biocompatibility

Fabrication and photocatalytic performance of electrospun PVA/silk/TiO 2 nanocomposite textile

Biomimetic supramolecular fibers exhibit water-induced supercontraction

Mass spider silk production through targeted gene replacement in Bombyx mori

A review of recent research on the use of cellulosic fibres, their fibre fabric reinforced cementitious, geo-polymer and polymer composites in civil engineering

Toughness of spider silk at high and low temperatures

Design and fabrication of silk templated electronic yarns and applications in multifunctional textiles

Fabrication of high performance silk fibroin fibers via stable jet electrospinning for potential use in anisotropic tissue regeneration

Evidence of selection at melanin synthesis pathway loci during silkworm domestication

Structural origins of silk piezoelectricity

Mechanical and thermal properties of wool waste fabric reinforced composites

Structure and morphology of electrospun silk nanofibers

Electrospinning of three-dimensional nanofibrous tubes with controllable architectures

Electrospun silk biomaterial scaffolds for regenerative medicine

Mechanisms and control of silkbased electrospinning

Bilayered scaffold based on RGD recombinant spider silk proteins for small diameter tissue engineering

Advanced polyimide fibers

Variability in mechanical properties of Bombyx mori silk

Studies on the use of recombinant spider silk protein/polyvinyl alcohol electrospinning membrane as wound dressing

Preparation and characterization of a novel electrospun spider silk fibroin/poly(D, L-lactide) composite fiber

A novel three-dimensional tubular scaffold prepared from silk fibroin by electrospinning

Recent development of flax fibres and their reinforced composites based on different polymeric matrices