key: cord-0815184-qd0k8174 authors: Mauriz, Elba title: Recent Progress in Plasmonic Biosensing Schemes for Virus Detection date: 2020-08-22 journal: Sensors (Basel) DOI: 10.3390/s20174745 sha: 5a4077cfa9851cd52820a155783c36e3415e844e doc_id: 815184 cord_uid: qd0k8174 The global burden of coronavirus disease 2019 (COVID-19) to public health and global economy has stressed the need for rapid and simple diagnostic methods. From this perspective, plasmonic-based biosensing can manage the threat of infectious diseases by providing timely virus monitoring. In recent years, many plasmonics’ platforms have embraced the challenge of offering on-site strategies to complement traditional diagnostic methods relying on the polymerase chain reaction (PCR) and enzyme-linked immunosorbent assays (ELISA). This review compiled recent progress on the development of novel plasmonic sensing schemes for the effective control of virus-related diseases. A special focus was set on the utilization of plasmonic nanostructures in combination with other detection formats involving colorimetric, fluorescence, luminescence, or Raman scattering enhancement. The quantification of different viruses (e.g., hepatitis virus, influenza virus, norovirus, dengue virus, Ebola virus, Zika virus) with particular attention to Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) was reviewed from the perspective of the biomarker and the biological receptor immobilized on the sensor chip. Technological limitations including selectivity, stability, and monitoring in biological matrices were also reviewed for different plasmonic-sensing approaches. Viral infections can be transmitted among human populations in a short period of time via droplets, aerosols, contact with abiotic surfaces, and even fecal matter [1] [2] [3] . The serious consequences of rapid airborne transmission are a cause of great concern since the global pandemic of coronavirus disease has surpassed the number of cases and economic impact of recent virus disease outbreaks [e.g., H1N1/H5N1 flu, Ebola, MERS-CoV (Middle East Respiratory Syndrome Coronavirus), and SARS-CoV-1(Severe Acute Respiratory Syndrome Coronavirus 1)] [4] . The need for effective management of current and future epidemics has urged the development of rapid and sensitive screening tools. Therefore, viral diagnosis has become a primary need to control the spread of viral diseases [4] [5] [6] [7] [8] [9] . Traditionally, viral diagnosis has relied upon culture-based methods and serological tests that detect either direct (intact viruses or their components: proteins or nucleic acids) or indirect (immunogens or antibodies against the viral antigens) virus infectious diseases [5] . More recently, the advances of molecular techniques in viral diagnosis have permitted that nucleic acid-based amplification methods such as the polymerase chain reaction (PCR) and the reverse transcriptase-quantitative polymerase chain reaction (RT-qPCR) have consolidated as the gold standard methods for the routine diagnosis of a wide range of viruses (human immunodeficiency virus (HIV), gure 1. Differences in volume, surface, and localized surface plasmon resonances of zeromensional metallic nanoparticles and two-dimensional thin, metallic surfaces. The surface plasmon lariton (SPP) can only be excited at certain wave vectors and decays evanescently from the surface. he momentum-matching condition leads to the SPP resonance and only exists at certain incident gles. In localized surface plasmon resonance, absorption dominates for small particles, less than 5 nm, whereas the scattering cross-section dominates for big nanoparticles, greater than ~15 nm. dapted with permission from Li et al. [26] Copyright © (2015) Royal Society of Chemistry (RSC)). his special characteristic allows enhancing the spatial resolution of LSPR configurations ing the geometry and composition of metallic nanostructures, laying the basis for colorime onic biosensing [27, 28] . The local electromagnetic field can enhance optical processes suc scattering and fluorescence, leading to SERS and plasmon-enhan chemiluminescence (ECL) sensing schemes [29] [30] [31] . The sensitivity achieved by both op urations is higher than that of SPR and LSPR, thus ensuring the detection of single v es. Alternatively, the propagation of electromagnetic radiation using optical fibers can als d to virus detection via miniaturized platforms with SPR and LSPR configurations [32 e 2). The momentum-matching condition leads to the SPP resonance and only exists at certain incident angles. In localized surface plasmon resonance, absorption dominates for small particles, less thañ 15 nm, whereas the scattering cross-section dominates for big nanoparticles, greater than~15 nm. Adapted with permission from Li et al. [26] Copyright © (2015) Royal Society of Chemistry (RSC)). This special characteristic allows enhancing the spatial resolution of LSPR configurations by designing the geometry and composition of metallic nanostructures, laying the basis for colorimetric plasmonic biosensing [27, 28] . The local electromagnetic field can enhance optical processes such as Raman scattering and fluorescence, leading to SERS and plasmon-enhanced electrochemiluminescence (ECL) sensing schemes [29] [30] [31] . The sensitivity achieved by both optical configurations is higher than that of SPR and LSPR, thus ensuring the detection of single virus particles. Alternatively, the propagation of electromagnetic radiation using optical fibers can also be applied to virus detection via miniaturized platforms with SPR and LSPR configurations [32, 33] (Figure 2 ). Technological advancements in plasmonic biosensing including colorimetric and fluorescence enhancement as well as the utilization of nanomaterials and optical aperture nanostructures for achieving highly sensitive virus detection are described in this section. Technological advancements in plasmonic biosensing including colorimetric and fluorescence enhancement as well as the utilization of nanomaterials and optical aperture nanostructures for achieving highly sensitive virus detection are described in this section. Nanomaterials provide the signal amplification of plasmonic biosensing due to their interesting optical, magnetic, and electrical properties. The biocompatibility and easy chemical activation are also significant advantages. Likewise, the large surface area-to-volume ratio provides a higher loading of biological receptors [14, [34] [35] [36] . Depending on their chemical composition, dimension, and physical properties, common types of plasmonic nanomaterials can vary from metallic nanoparticles and quantum dots to graphene nanostructures (i.e., carbon nanocomposites: Nanotubes, nanosheets, nanoflowers) [14, [37] [38] [39] . Since the number of nanomaterial-based applications for viral sensing has increased significantly in the last decade, a comprehensive review of recent developments on plasmonic platforms is presented below and summarized in Table 1 . Nanomaterials provide the signal amplification of plasmonic biosensing due to their interesting optical, magnetic, and electrical properties. The biocompatibility and easy chemical activation are also significant advantages. Likewise, the large surface area-to-volume ratio provides a higher loading of biological receptors [14, [34] [35] [36] . Depending on their chemical composition, dimension, and physical properties, common types of plasmonic nanomaterials can vary from metallic nanoparticles and quantum dots to graphene nanostructures (i.e., carbon nanocomposites: Nanotubes, nanosheets, nanoflowers) [14, [37] [38] [39] . Since the number of nanomaterial-based applications for viral sensing has increased significantly in the last decade, a comprehensive review of recent developments on plasmonic platforms is presented below and summarized in Table 1 . Plasmonic nanomaterials can be classified regarding their chemical composition in organic (fullerenes, carbon nanotubes) and inorganic (metal, oxide-based nanomaterials, and quantum dots) materials. Among the latter ones, noble-metal nanoparticles have been extensively applied to plasmonic biosensing due to the strong absorption of light resulting from the oscillation of the free electrons. The size and shape of nanoparticles along with the interparticle distance determine the amplitude of oscillation and the position of the SPR band [57] . Likewise, variations of the chemical surrounding media due to the binding event between the biological receptor and the target analyte can also affect the oscillations. This implies that the physicochemical properties of the metallic nanoparticles can be tuned to transform LSPR spectra and produce even color variations, generating a signal response [19, 27] . Additionally, their high biocompatibility makes possible the functionalization of the surface with a broad range of biological receptors from antibodies to nucleic acids, glycoproteins, and aptamers, thus enabling the selective binding of a variety of analytes [35, 36] . Therefore, the utilization of gold and silver nanoparticles in LSPR, SERS, fluorescence enhancement, and colorimetric assays represents a popular approach for detecting small analytes. LSPR sensing is the most common sensing scheme that exploits noble-metal nanoparticles in analytical applications. LPSR biosensors employing gold nanoparticles (AuNPs) have been successfully applied to clinical diagnostics, environmental monitoring, and food safety [23] . Particularly, a LSPR platform consisting of a hetero-assembled, AuNPs sandwich-immunoassay has been reported to detect hepatitis B surface antigen (HBsAg) at 100 fg mL −1 [40] . First, a glass substrate fabricated with AuNPs and conjugated with an anti-HBsAg antibody was prepared to detect target antigen HBsAg ( Figure 3 ). After 10 min of inoculation, a second layer of AuNPs conjugated with anti-HBsAg antibody was formed to obtain the hetero-assembled, AuNPs sandwich-immunoassay chip format. The specificity of the immunoassay was tested against alpha fetoprotein (AFP), C-reactive protein (CRP), and prostate-specific antigen (PSA) while the validation was carried out in serum samples. Nevertheless, the suitability of the test for multiplexing analysis is suggested for further research. Another LSPR platform takes advantage of a hollow Au spike-like nanoparticle (hAuSN) to detect avian influenza virus (AIV H5N1) using a multi-functional DNA three-way unction (3WJ) [41] . This method provides target recognition by aptamer binding, connection to the substrate, and signal enhancement. To achieve this multi-functionality, each piece of the DNA 3WJ was tailored to a hemagglutinin (HA) binding aptamer, fluorescein (FAM) dye, and thiol group. The application comprised the immobilization of spike-like gold nanoparticles onto indium-tin-oxide (ITO) substrates and the subsequent functionalization with the DNA for detecting hemagglutinin (HA) protein at 1 pM levels. Although the work focused on the characterization of the hAuSN-modified ITO substrate and the DNA 3WJ immobilization process, the performance of clinical tests as well as the specificity of LSPR measurements with related and nonrelated proteins in 10-diluted chicken serum were also discussed ( Figure 4 ). Another LSPR platform takes advantage of a hollow Au spike-like nanoparticle (hAuSN) to detect avian influenza virus (AIV H5N1) using a multi-functional DNA three-way unction (3WJ) [41] . This method provides target recognition by aptamer binding, connection to the substrate, and signal enhancement. To achieve this multi-functionality, each piece of the DNA 3WJ was tailored to a hemagglutinin (HA) binding aptamer, fluorescein (FAM) dye, and thiol group. The application comprised the immobilization of spike-like gold nanoparticles onto indium-tin-oxide (ITO) substrates and the subsequent functionalization with the DNA for detecting hemagglutinin (HA) protein at 1 pM levels. Although the work focused on the characterization of the hAuSN-modified ITO substrate and the DNA 3WJ immobilization process, the performance of clinical tests as well as the specificity of LSPR measurements with related and nonrelated proteins in 10-diluted chicken serum were also discussed ( Figure 4) . The LSPR effect of silver nanostructures has also been reported to detect dengue NS1 antigen using an immunoassay format [42] . The creation of the metal nanostructures was obtained through the deposition of a thin, silver film onto silicon substrate via thermal annealing. The repeated recrystalization of the thin, silver layer resulted in the formation of the nanostructures in which the anti-NS1 antibody was immobilized. To measure NS1 antigen in whole blood, a polyethersulfone membrane filter was integrated at the inlet of the biosensor. This membrane allowed the separation of plasma from whole blood, avoiding the centrifugation of the sample. The direct detection of NS1 antigen was performed with a limit of detection of~0.06 µg mL −1 , which is within the clinical levels observed in the first days of dengue infection. Despite the proposed method making use of spiked, whole blood samples instead of patient samples, the blood-plasma separation-integrated strategy represents a great advance toward the development of lab-on-chip devices and point-of-care virus diagnostics. Absorbance spectra were measured in the 400-700-nm wavelength range. The target-aptamer interaction induced changes in the local refractive at a given wavelength that were attributed to the extension of light absorption by the biofilm on the Au spike-like nanoparticle (hAuSN)-modified indium-tin-oxide (ITO) electrode. The effect of DNA three-way unction (3WJ) concentration on the LSPR substrate was investigated in the concentration range from 10 nM to 5 μM. Error bar represents relative standard deviation of five independent experiments. Adapted with permission from Lee et al. [41] Copyright © (2019) Elsevier. The LSPR effect of silver nanostructures has also been reported to detect dengue NS1 antigen using an immunoassay format [42] . The creation of the metal nanostructures was obtained through the deposition of a thin, silver film onto silicon substrate via thermal annealing. The repeated recrystalization of the thin, silver layer resulted in the formation of the nanostructures in which the anti-NS1 antibody was immobilized. To measure NS1 antigen in whole blood, a polyethersulfone membrane filter was integrated at the inlet of the biosensor. This membrane allowed the separation of plasma from whole blood, avoiding the centrifugation of the sample. The direct detection of NS1 antigen was performed with a limit of detection of ~0.06 μg mL −1 , which is within the clinical levels observed in the first days of dengue infection. Despite the proposed method making use of spiked, whole blood samples instead of patient samples, the blood-plasma separation-integrated strategy represents a great advance toward the development of lab-on-chip devices and point-of-care virus diagnostics. A singular LSPR immunosensor approach compares the capability of antibody-functionalized gold, silver, and copper nanoparticles for the detection of respiratory syncytial virus (RSV) in the presence of Pseudomonas aeruginosa and adenovirus [43] . The characterization of nanoparticle size distribution and time-dependent LSPR shifting was determined for both nonfunctionalized and functionalized metallic nanoparticles. The interaction with RSV showed better results in LPSR shifting for copper as compared to gold and silver nanoparticles with a LOD and limit of quantification (LOQ) of 2.4 and 14 plaque-forming units (PFU), respectively. Regarding the crossreactivity under the influence of other respiratory pathogens, copper and silver nanoparticles were more specific for RSV monitoring. Although additional results on the detection of RSV clinical specimens are not shown, this work presents good preliminary results for the direct determination of RSV. Plasmonic nanoparticles have also been exploited by SERS biosensors. The sensing scheme of SERS benefits from the enhancement of Raman scattering by providing the modulation of surface Absorbance spectra were measured in the 400-700-nm wavelength range. The target-aptamer interaction induced changes in the local refractive at a given wavelength that were attributed to the extension of light absorption by the biofilm on the Au spike-like nanoparticle (hAuSN)-modified indium-tin-oxide (ITO) electrode. The effect of DNA three-way unction (3WJ) concentration on the LSPR substrate was investigated in the concentration range from 10 nM to 5 µM. Error bar represents relative standard deviation of five independent experiments. Adapted with permission from Lee et al. [41] Copyright © (2019) Elsevier. A singular LSPR immunosensor approach compares the capability of antibody-functionalized gold, silver, and copper nanoparticles for the detection of respiratory syncytial virus (RSV) in the presence of Pseudomonas aeruginosa and adenovirus [43] . The characterization of nanoparticle size distribution and time-dependent LSPR shifting was determined for both nonfunctionalized and functionalized metallic nanoparticles. The interaction with RSV showed better results in LPSR shifting for copper as compared to gold and silver nanoparticles with a LOD and limit of quantification (LOQ) of 2.4 and 14 plaque-forming units (PFU), respectively. Regarding the cross-reactivity under the influence of other respiratory pathogens, copper and silver nanoparticles were more specific for RSV monitoring. Although additional results on the detection of RSV clinical specimens are not shown, this work presents good preliminary results for the direct determination of RSV. Plasmonic nanoparticles have also been exploited by SERS biosensors. The sensing scheme of SERS benefits from the enhancement of Raman scattering by providing the modulation of surface plasmon polaritons at a greater distance from the metallic nanoparticle surface, thereby offering higher sensitivity than that of SPR and LSPR. Lebedev et al. reported a SERS platform applied to the detection of viral DNA using nanoclusters (NC) of gold nanoparticles [44] . SERS experiments were performed on lone gold nanoparticles, individual nanoclusters, and in two distinct plasmonic nanoclusters. NC were conjugated to either virus-like particles (VLP) incorporating artificial thiols at the Lys sites (VLP-NC) or basic cluster (BC)-mutant incorporating genetic engineering Cys to the protein capsid subunit ( Figure 5 ). This work showed the potential of fabricating complex 3D nanoplasmonic structures in solution by assembling gold nanoparticles on VLP. The sensitivity of the nanocluster biosensor was demonstrated as a proof of principle for the detection of M13 mp18 single-stranded DNA below 0.25 ng µL −1 levels. nanoclusters. NC were conjugated to either virus-like particles (VLP) incorporating artificial thiols at the Lys sites (VLP-NC) or basic cluster (BC)-mutant incorporating genetic engineering Cys to the protein capsid subunit ( Figure 5 ). This work showed the potential of fabricating complex 3D nanoplasmonic structures in solution by assembling gold nanoparticles on VLP. The sensitivity of the nanocluster biosensor was demonstrated as a proof of principle for the detection of M13 mp18 singlestranded DNA below 0.25 ng μL −1 levels. with specific DNA Raman peaks. The characterization of NCs in solution showed a major peak of 78 nm and 77 nm for VLP-NC and BC NC, respectively, thus indicating that the size of the NC is larger relative to the free AuNP (major peak: 37 nm). Adapted with permission from Lebedev et al. [44] Copyright © (2016) Elsevier. Another virus SERS-based strategy has been proven to detect hepatitis B surface antigen HBsAg [45] . The biosensor utilized an active tag consisting of a composite of graphene oxide (GO) containing carboxy and hydroxy groups decorated with gold nanorods (GNRs). Each composite carried the SERS probe 2-mercaptopyridine (Mpy) in which the antibody against HBsAg was immobilized ( Figure 6a ). The immunoassay took advantage of the sandwich format between the capture antibody and the detection antibody attached to the GO-GNRs' composites by measuring the SERS signal provided via the 2-Mpy bound to the GNRs' surface ( Figure 6b ). The SERS signal response to the interaction of the HBs' Ag was measured in the 1-1000 pg·mL −1 with a limit of detection of 0.05 pg mL −1 (at a signal to noise ratio of 3). The applicability of the proposed method for clinical analysis was Another virus SERS-based strategy has been proven to detect hepatitis B surface antigen HBsAg [45] . The biosensor utilized an active tag consisting of a composite of graphene oxide (GO) containing carboxy and hydroxy groups decorated with gold nanorods (GNRs). Each composite carried the SERS probe 2-mercaptopyridine (Mpy) in which the antibody against HBsAg was immobilized ( Figure 6a ). The immunoassay took advantage of the sandwich format between the capture antibody and the detection antibody attached to the GO-GNRs' composites by measuring the SERS signal provided via the 2-Mpy bound to the GNRs' surface ( Figure 6b ). The SERS signal response to the interaction of the HBs' Ag was measured in the 1-1000 pg·mL −1 with a limit of detection of 0.05 pg mL −1 (at a signal to noise ratio of 3). The applicability of the proposed method for clinical analysis was evaluated by testing HBsAg in spiked, real serum samples from nine patients showing recovery values between 96 and 104%. Heavy metal quantum dots are semiconductor nanomaterials that have gained prominence in recent years for multiplex detection due to their broad adsorption and narrow emission band. The possibility of tuning the emission spectra over a wide range of wavelengths and the resistivity to external physico-chemical conditions are also significant advantages [58] . Among them, fluorescent quantum dots (QD) have unique optical properties, which, in combination with the surface plasmon properties of metallic nanoparticles, can enhance the sensitivity of plasmonic biodetection systems [46] [47] [48] 59] . Typically, most of quantum dots' applications have been exploited in LSPR-based biosensors because the distance and dimensions of the adjacent gold nanoparticles can affect the fluorescence signal and, therefore, be quenched depending on the analyte concentration. Thus, various interesting LSPR developments have made use of the fluorescence enhancement to detect very low dimensional samples like viruses. Heavy metal quantum dots are semiconductor nanomaterials that have gained prominence in recent years for multiplex detection due to their broad adsorption and narrow emission band. The possibility of tuning the emission spectra over a wide range of wavelengths and the resistivity to external physico-chemical conditions are also significant advantages [58] . Among them, fluorescent quantum dots (QD) have unique optical properties, which, in combination with the surface plasmon properties of metallic nanoparticles, can enhance the sensitivity of plasmonic biodetection systems [46] [47] [48] 59] . Typically, most of quantum dots' applications have been exploited in LSPR-based biosensors because the distance and dimensions of the adjacent gold nanoparticles can affect the fluorescence signal and, therefore, be quenched depending on the analyte concentration. Thus, various interesting LSPR developments have made use of the fluorescence enhancement to detect very low dimensional samples like viruses. Various virus-based applications involving LSPR signal enhancement with fluorescent quantum dots have been reported by Park's group. For instance, Takemura et al. described a LSPR immunosensor to determine influenza H1N1 virus [46] . The biosensor utilized the fluorescence signal generated by alloyed CdSeTeS QDs functionalized with anti-neuraminidase antibody (anti-NA Ab) in combination with the optical transduction induced from AuNP conjugated to anti-hemagglutinin antibody (anti-HA Ab). The enhancement of the fluorescent signal triggered by the LSPR signal from adjacent AuNPs allowed the sensitive detection of the antigens on the surface of H1N1 virus in Various virus-based applications involving LSPR signal enhancement with fluorescent quantum dots have been reported by Park's group. For instance, Takemura et al. described a LSPR immunosensor to determine influenza H1N1 virus [46] . The biosensor utilized the fluorescence signal generated by alloyed CdSeTeS QDs functionalized with anti-neuraminidase antibody (anti-NA Ab) in combination with the optical transduction induced from AuNP conjugated to anti-hemagglutinin antibody (anti-HA Ab). The enhancement of the fluorescent signal triggered by the LSPR signal from adjacent AuNPs allowed the sensitive detection of the antigens on the surface of H1N1 virus in deionized water (0.03 pg mL −1 ) and human serum (0.4 pg mL −1 ) (Figure 7 ). The effect of the distance between fluorescent CdZnSeS/ZnSeS QDs and gold nanoparticles was studied by Nasrin et al. using different lengths of peptide chains as a linkage [47] . The sensing mechanism was enhanced by the quenching of the QDs' fluorescence due to the steric hindrance on the LSPR signal induced by the different concentrations of the influenza virus. By controlling the distance between QDs and gold nanoparticles with a peptide chain of 18 amino acids, the influenza virus was determined specifically with a detection limit of 17.02 fg mL −1 . The same quenching effect was observed when using CdSeTeS QDs/AuNPs' nanocomposites for detecting norovirus-like particles (NoV-LPs) [48] . As the previous study, the fluorescence enhancement of QDs was triggered by the steric hindrance-induced LSPR signal from the adjacent AuNPs. The linear response to the concentration of NoV-LPs was in the 10 −14 to 10 −9 g mL −1 range, showing a limit of detection of 12.1 × 10 −15 g mL −1 . The selectivity for the detection of the target NoV-LPs was evaluated with influenza virus A (H3N2) and Zika viruses, demonstrating the nanobiosensor specificity ( Figure 8 ). Finally, another approach consisting of four different plasmonic NPs bound to CdSeS alloyed QDs was developed to determine Zika RNA virus [49] . The investigation of all four fluorescent nanohybrids' systems demonstrated that the LSPR fluorescence signal is strongly dependent on the plasmonic nanostructure, showing higher intensity for the bimetallic NPs in comparison with the single-metallic plasmonic NPs. The limits of detection of the nanohybrids were between 1.7 and 7.6 copies mL −1 , depending on the composition of the nanohybrids: Alloyed AuAgNP-Qdot646-MB (molecular beacon) (1.7 copies mL −1 ) > CS Au/AgNP-Qdot646-MB (LOD = 2.4 copies mL −1 ) > AuNP-Qdot646-MB (LOD = 2.9 copies mL −1 ) > AgNP-Qdot646-MB (LOD = 7.6 copies mL −1 ) (Figure 9 ). The work proved that LSPR signals from plasmonic nanoparticles (NPs) can modulate the fluorescence signal from semiconductor QDs. Finally, another approach consisting of four different plasmonic NPs bound to CdSeS alloyed QDs was developed to determine Zika RNA virus [49] . The investigation of all four fluorescent nanohybrids' systems demonstrated that the LSPR fluorescence signal is strongly dependent on the plasmonic nanostructure, showing higher intensity for the bimetallic NPs in comparison with the single-metallic plasmonic NPs. The limits of detection of the nanohybrids were between 1.7 and 7.6 copies mL −1 , depending on the composition of the nanohybrids: Alloyed AuAgNP-Qdot646-MB (molecular beacon) (1.7 copies mL −1 ) > CS Au/AgNP-Qdot646-MB (LOD = 2.4 copies mL −1 ) > AuNP-Qdot646-MB (LOD = 2.9 copies mL −1 ) > AgNP-Qdot646-MB (LOD = 7.6 copies mL −1 ) (Figure 9 ). The work proved that LSPR signals from plasmonic nanoparticles (NPs) can modulate the fluorescence signal from semiconductor QDs. Carbon nanomaterials are graphite structures that can adopt different dimensions ranging from cylindrical nanotubes to plane nanosheets. Graphene-based nanostructures provide numerous benefits for plasmonic applications due to their physicochemical properties including a high surface and biocompatible area that facilitate surface functionalization [60, 61] . Several SPR graphene-based applications have been developed by Mahdi's group for the quantification of dengue virus at picomolar levels. A composite of reduced graphene oxide and polyamidoamine (PAMAM) dendrimers is described for the detection of the E-proteins of the serotype 2 of dengue virus (DENV 2). The detection format consisted of an immunoassay in which monoclonal antibodies were immobilized on self-assembled, dithiobis (succinimidyl undecanoate) amine-activated layers [50] . The characterization of analytical parameters involved the determination of affinity-binding constants, detection accuracy, and figure of merit values for the minimum E-proteins' concentration (0.08 pM) while the assay selectivity was tested against E-proteins of Zika virus (Figure 10) . A similar SPR immunosensor strategy, although involving the introduction of cadmium sulfide quantum dots over graphene oxide surfaces, was also applied to the detection of dengue E-proteins' virus [51] . The optimization of protein interactions with the antibody immobilized on the graphene oxide-activated surface achieved the lowest detection limit at 1 pM, thus demonstrating less sensitivity in comparison with the composite of PAMAM dendrimers. Sensors 2020, 20, x FOR PEER REVIEW 15 of 30 Carbon nanomaterials are graphite structures that can adopt different dimensions ranging from cylindrical nanotubes to plane nanosheets. Graphene-based nanostructures provide numerous benefits for plasmonic applications due to their physicochemical properties including a high surface and biocompatible area that facilitate surface functionalization [60, 61] . Several SPR graphene-based applications have been developed by Mahdi's group for the quantification of dengue virus at picomolar levels. A composite of reduced graphene oxide and polyamidoamine (PAMAM) dendrimers is described for the detection of the E-proteins of the serotype 2 of dengue virus (DENV 2). The detection format consisted of an immunoassay in which monoclonal antibodies were immobilized on self-assembled, dithiobis (succinimidyl undecanoate) amine-activated layers [50] . The characterization of analytical parameters involved the determination of affinity-binding constants, detection accuracy, and figure of merit values for the minimum E- proteins' concentration (0.08 pM) while the assay selectivity was tested against E-proteins of Zika virus ( Figure 10) . A similar SPR immunosensor strategy, although involving the introduction of cadmium sulfide quantum dots over graphene oxide surfaces, was also applied to the detection of dengue E-proteins' virus [51] . The optimization of protein interactions with the antibody immobilized on the graphene oxide-activated surface achieved the lowest detection limit at 1 pM, thus demonstrating less sensitivity in comparison with the composite of PAMAM dendrimers. Other plasmonic immunosensing approaches have exploited the potential of binary nanoparticle-graphene hybrid structures for the detection of virus in biological samples. For example, a magnetofluorometric platform made use of the combined effect of SERS and fluorescence of quantum dots to assist nanoparticle-decorated carbon graphenes in monitoring the presence of hemagglutinin (HA) protein in the surface of H1N1 influenza virus [52] . The immunoassay involved a sandwich structure between binary nanoparticles-graphene hybrids and QDs through HA Ab-virus conjugation targeting the virus by magnetic separation and subsequent fluorometric detection. The influence of complex media in the assay performance was tested using spiked serum samples achieving a LOD of 6.07 pg mL −1 . Likewise, the same sensing scheme involving binary nanoparticlegraphene structures, although with the combined effect of gold and magnetic nanoparticles, was presented to detect norovirus-like particles [53] . In this case, the fluorescent signal enhancement Other plasmonic immunosensing approaches have exploited the potential of binary nanoparticlegraphene hybrid structures for the detection of virus in biological samples. For example, a magnetofluorometric platform made use of the combined effect of SERS and fluorescence of quantum dots to assist nanoparticle-decorated carbon graphenes in monitoring the presence of hemagglutinin (HA) protein in the surface of H1N1 influenza virus [52] . The immunoassay involved a sandwich structure between binary nanoparticles-graphene hybrids and QDs through HA Ab-virus conjugation targeting the virus by magnetic separation and subsequent fluorometric detection. The influence of complex media in the assay performance was tested using spiked serum samples achieving a LOD of 6.07 pg mL −1 . Likewise, the same sensing scheme involving binary nanoparticle-graphene structures, although with the combined effect of gold and magnetic nanoparticles, was presented to detect norovirus-like particles [53] . In this case, the fluorescent signal enhancement provided by QDs was replaced by the electrical conductivity and magnetic properties of the metallic and magnetic nanoparticles decorated with graphene. The change in electrical resistance was used to measure the capture of the norovirus-like particles with a detection limit calculated as 1.16 pg mL −1 . Finally, another composite consisting of gold nanorods and graphene oxide and gold nanorods (GO-GNRs) was applied to the determination of hepatitis B surface antigen using surface-enhanced Raman spectroscopy (SERS) as described above [45] . The fabrication of plasmonic structures also relies on lithographic approaches, which enable the design of ordered arrays of metallic nanoapertures, such as nanoholes, nanoantennas, nanoslits, or nanodisks. The interaction of light with periodic arrays of nanoholes exhibits extraordinary optical transmission (EOT) effects, thus enhancing the transmission efficiency of light at certain wavelengths. These spectral features have facilitated the development of optical arrangements that support high bulk sensitivities and permit their integration into microfluidic systems and their application for the detection of single molecules [62] [63] [64] [65] . For instance, Zang et al. presented an interesting approach for single-molecule detection of Ebola virus antigens. The biosensor consisted of a 3D plasmonic nanoantenna array, which used a sandwich-immunoassay format with fluorescent intensity enhancement [54] (Figure 11 ). The nanoantenna configuration involved silicon-dioxide nanopillars paved with gold nanodisks and nanodots that enhanced the fluorescence signal through the formation of nanocavities. The functionalization of the nanopillars' surface using a thiol-gold link and a protein A/G layer as spacers allowed the selection of the best capture and detection antibody while preventing irradiative fluorescence signal loss on the gold surfaces. Under optimized conditions, the Ebola virus soluble glycoprotein (EBOV-sGP) was detected in human plasma at 220 fg mL −1 levels, which significantly improved the recommended immunoassay-best test for the Ebola virus antigen detection. Another plasmonic nanohole-based assay was developed for capturing single dengue virus-like particles [55] . The dimensions of the nanohole array platform were calculated according to the size distribution of virus particles toward a virucidal drug candidate by nanoparticle tracking analysis. The work specifically concentrated on the investigation of the SPR response to the adsorption of virus-like particles into either nonfunctionalized or thiol-terminated, methoxypolyethylene(glycol)-functionalized nanohole arrays. SPR experiments indicated higher bulk refractive index sensitivities in functionalized nanoholes with a low surface coverage with regard to nonfunctionalized nanoholes. The biosensing performance was also evaluated by monitoring spectral shifts for the virucidal-induced rupture of single virus-like particles, thereby showing that almost all virus-like particles were ruptured on the mPEG (methoxy polyethylene glycol)-SH-functionalized nanohole array. Similarly, another study measured the adsorption of a small virus particle of 25 nm (PhiX174) using double nanohole apertures in a gold film by the extraordinary acoustic Raman (EAR) method [56] . As with the previous work, the research concentrated on the characterization of the optical trapping and analytical results on virus sensitivity and selectivity were not evaluated. SPR and LSPR biosensors that integrate optical fibers for coupling optical excitation of surface plasmons offer an interesting alternative to classical prism-based configurations. The possibility of driving the propagation of the electromagnetic field radiation through a fiber-optic system permits the improvement of the wavelength modulation and the development of compact structures. Many optical fiber SPR/LSPR platforms have provided miniaturized sensing approaches for the determination of clinical biomarkers [32] . Most representative advancements in fiber-optic strategies for viral diagnosis are presented in Table 2 . SPR and LSPR biosensors that integrate optical fibers for coupling optical excitation of surface plasmons offer an interesting alternative to classical prism-based configurations. The possibility of driving the propagation of the electromagnetic field radiation through a fiber-optic system permits the improvement of the wavelength modulation and the development of compact structures. Many optical fiber SPR/LSPR platforms have provided miniaturized sensing approaches for the determination of clinical biomarkers [32] . Most representative advancements in fiber-optic strategies for viral diagnosis are presented in Table 2 . [76] LOD: Limit of detection; AuNPs: Gold nanoparticles. In particular, a fiber-optic SPR system has been described for the analysis of avian influenza virus subtype H6 [66] . To optimize the immobilization of the self-assembled monolayers (SAM) and the subsequent antibody functionalization, the optical fiber was modified with plasma at low temperature, which rendered better results than chemical modification. The binding interaction between immobilized antibodies and antigens on the cell surface was evaluated in the 10 4 to 10 8 EID 50/0.1 mL (EID: embryo-infectious dose), showing a detection limit of 5.14 × 10 5 EID 50/0.1 mL. The combination of the optical properties of gold nanostructures-LSPR surfaces with the achievement of total internal reflection via optical fiber configurations can provide signal enhancement and better spatial sensitivities. The integration of nanorod-modified surfaces into a fiber-optic LSPR platform have permitted the development of an immunosensor for the determination of a nonclinical application in plant viruses: Cymbidium mosaic virus (CymMV) and Odontoglossum ringspotvirus (ORSV) [67] . The limit of detection of viral antigens over antibody functionalized on gold nanorods was at picogram-per-liter levels . The improvement in sensitivity in comparison with ELISA method was attributed to the higher sensitivity of nanorods, which additionally prevents the color interference of similar-sized nanospheres. Finally, the coating of an excessively tilted fiber grating surface (Ex-TFG) with gold nanospheres has permitted the development of an immunosensor for detecting Newcastle disease virus (NDV) [68] . The modification of the fiber cladding with gold nanospheres (AuNs) enhanced the LSPR effect while the activation of gold nanospheres with staphylococcal protein A (SPA) improved the bioactivity of anti-NDV monoclonal antibodies 5-10 times compared to that of reference Ex-TFG without AuN treatment. The monitoring of resonance wavelength red-shift showed a minimum detectable amount for NDV of~5 pg, which was slightly better than RT-PCR (10 pg) method. The specificity of the immunoassay was also demonstrated against avian influenza virus while clinical performance confirmed by comparing results of NVD in allantoic fluid and solution test. The utilization of colorimetric assays is becoming more important in clinical diagnosis for detection of either organic (proteins, DNA) or inorganic molecules (anions, metal ions). The fabrication of plasmonic colorimetric nanosensors relies mainly on noble metal nanoparticles due to their high LSPR extinction coefficients in the visible range [27, 30] . Most of the plasmonic colorimetric assays make use of the aggregation of metallic nanoparticles, resulting in a shift of the plasmonic band from red to blue that can be easily observed by naked eyes [77] . The distance between nanoparticles is responsible for the red shift in the plasmon bands when the interparticle distance decreases to less than the average particle diameter. In addition to the aggregation effect, the LSPR shift can also be induced by the transformation of the size, morphology, and dielectric environment, as a consequence of the etching or the growth of metal plasmonic nanoparticles [77] . Although the strong plasmonic coupling between nearby particles is the most exploited approach, "non-aggregation" plasmonic colorimetric sensors are attracting attention due to their simplicity and easy use as test strips. A plasmonic colorimetric sensor based on the aggregation of colloidal nanoparticles was described for the detection of influenza virus [69] . The application utilizes the interaction between viral envelope protein hemagglutinin and sialic acid to reduce and stabilize gold nanoparticles' aggregation. Although sensitivity values related to virus quantification were not shown, a good correlation between variations in optical density and influenza B virus dilutions, causing a colorimetric change, was reported for 0.156 vol% virus dilutions (hemagglutination titer of 512). Another plasmonic colorimetric application for influenza virus detection (lineage H5N1) employed gold nanobipyramids (Au NBPs) as noble metal nanostructures [70] . This approach proved the deposition of silver on highly monodispersed gold nanobipyramids after the reaction catalyzed by alkaline phosphatase (ALP). The silver coating on the Au NBPs caused a blue shift in the LSPR band, resulting in a vivid color change that could be detected with the naked eye. The proposed method was applied to the determination of ALP activity showing a limit of detection of 0.086 mU mL −1 while H5N1 virus antigen was detected at 1 pg mL −1 levels using a sandwich-immunoassay format. The improvement in sensitivity in comparison with other methods was attributed to the high index faceted on the tips of the gold nanobipyramids with regard to gold nanorods. Similarly, a plasmonic platform consisting of silver deposition on antibody-conjugated gold nanoparticles was applied for monitoring hepatitis E virus (HEV) [71] . A nanozyme-based immunoassay was used to capture HEV-like particles (HEV-LPs) via binding to the conjugated gold nanoparticles (Figure 12 ). Color development was obtained by enhancing the catalytic activity of silver by adding tetramethylbenzidine (TMBZ) and hydrogen peroxide (H 2 O 2 ). A limit of detection of 10 pg mL −1 was obtained in buffer solution while the determination of HEV in real samples collected from fecal matter of HEV-infected monkey was in good correlation with RT-qPCR conventional methods (Figure) . Finally, a colorimetric assay approach based on the LSPR changes of silver nanoparticles induced by the hybridization chain reaction of the microRNA biomarker (miR-29a-3p) was described to detect H1N1 influenza A virus at picomolar levels [72] . The hybridization chain reaction triggered by target microRNA generated changes in the DNA stability that affected the silver nanoparticles' colloid system and was reflected by UV-visible spectrum. The limit of detection achieved by the proposed method was comparable to other colorimetric assays. The effect of collective oscillations of free electrons on the surface of metal nanostructures displayed in LSPR sensing can enhance the optical signal of a luminophore near noble metal nanoparticles [31, 73] . Plasmonic-enhanced electrochemiluminescence can be explained by the increase of excitation and emission, resulting from the enhancement of the electromagnetic field of incident light [31] . The distance between plasmonic nanoparticles and the luminophore determines the electrochemiluminescence process since the signal could be quenched when plasmonic nanoparticles working as energy or electron acceptors are very close to the luminophore. As a result, the energy transfer can be controlled using DNA or adaptors for the distance-mediated quenching and enhancement of electrochemiluminescence signal [74] . Owing to the simplicity of optical configuration, high sensitivity, and low background noise, plasmon-enhanced electrochemiluminescence has emerged as a promising biosensing scheme for the fabrication of medical diagnostic applications [74] . Although the number of virus-sensing approaches is still limited, several works have explored the potential of plasmon-enhanced electrochemiluminescence (ECL) as clinical nanosensors. For Finally, a colorimetric assay approach based on the LSPR changes of silver nanoparticles induced by the hybridization chain reaction of the microRNA biomarker (miR-29a-3p) was described to detect H1N1 influenza A virus at picomolar levels [72] . The hybridization chain reaction triggered by target microRNA generated changes in the DNA stability that affected the silver nanoparticles' colloid system and was reflected by UV-visible spectrum. The limit of detection achieved by the proposed method was comparable to other colorimetric assays. The effect of collective oscillations of free electrons on the surface of metal nanostructures displayed in LSPR sensing can enhance the optical signal of a luminophore near noble metal nanoparticles [31, 73] . Plasmonic-enhanced electrochemiluminescence can be explained by the increase of excitation and emission, resulting from the enhancement of the electromagnetic field of incident light [31] . The distance between plasmonic nanoparticles and the luminophore determines the electrochemiluminescence process since the signal could be quenched when plasmonic nanoparticles working as energy or electron acceptors are very close to the luminophore. As a result, the energy transfer can be controlled using DNA or adaptors for the distance-mediated quenching and enhancement of electrochemiluminescence signal [74] . Owing to the simplicity of optical configuration, high sensitivity, and low background noise, plasmon-enhanced electrochemiluminescence has emerged as a promising biosensing scheme for the fabrication of medical diagnostic applications [74] . Although the number of virus-sensing approaches is still limited, several works have explored the potential of plasmon-enhanced electrochemiluminescence (ECL) as clinical nanosensors. For example, an ECL assay based on magnetic-plasmonic Fe 3 O 4 yolk/Au shell (M@Au) was reported for the detection of a mouse sarcoma virus oncogene [73] . The study exploited the advantages of combining the magnetic properties of internal Fe 3 O 4 nanoparticles and the stability and low toxicity of graphite quantum dots to detect nucleic acids in the 1-fM−1-nM range ( Figure 13 ). The effect of the outer gold shell demonstrated better surface coupling than conventional gold nanoparticles. Particularly, the surface coupling induced by M@Au caused the amplification of the quantum dots signal due to the hybridization between target DNA and capture DNA labeled to M@Au. Practical application in spiked serum samples showed recoveries from 90.0-103%, demonstrating its usefulness for clinical analysis. Another plasmon-based ECL strategy utilizes the strong surface plasmon-coupling nonmetallic MoS2 nanosheets to enhance the ECL signal of sulfur-doped boron nitrogen QDs (S-BN QDs) [74] . The application investigated the effect of the distance between the luminophore and the nanoparticles using DNA chains of different lengths. The increase of distance between MoS2 nanosheets and S-BN QDs reduced the energy transfer while strengthening the surface plasma-coupling effect. Specifically, the assay was applied to the detection of hepatitis C virus (HCV) gene. The so-called hybridization chain reaction was used as an isothermal enzyme-free DNA amplification method to quantify DNA HCV with a limit of detection (LOD) of 0.17 pmol L −1 . The SARS-CoV-2 is an enveloped, nonsegmented β-coronavirus that causes a new, severe, acute respiratory syndrome and coronavirus disease (COVID-19) [1,3,75,78 ]. Since it is a positive-sense, single-stranded RNA virus (~30 kilobases in size and ~9860 amino acids), the genome of SARS-CoV-2 is the most important biomarker for diagnosis of COVID-19. SARS-CoV-2 structural and accessory Another plasmon-based ECL strategy utilizes the strong surface plasmon-coupling nonmetallic MoS 2 nanosheets to enhance the ECL signal of sulfur-doped boron nitrogen QDs (S-BN QDs) [74] . The application investigated the effect of the distance between the luminophore and the nanoparticles using DNA chains of different lengths. The increase of distance between MoS 2 nanosheets and S-BN QDs reduced the energy transfer while strengthening the surface plasma-coupling effect. Specifically, the assay was applied to the detection of hepatitis C virus (HCV) gene. The so-called hybridization chain reaction was used as an isothermal enzyme-free DNA amplification method to quantify DNA HCV with a limit of detection (LOD) of 0.17 pmol L −1 . The SARS-CoV-2 is an enveloped, nonsegmented β-coronavirus that causes a new, severe, acute respiratory syndrome and coronavirus disease (COVID-19) [1, 3, 75, 78] . Since it is a positive-sense, single-stranded RNA virus (~30 kilobases in size and~9860 amino acids), the genome of SARS-CoV-2 is the most important biomarker for diagnosis of COVID-19. SARS-CoV-2 structural and accessory proteins and even the whole virus SARS-CoV-2 could be used as antigens to monitor coronavirus disease (see Figure 14) . Additionally, the detection of immunoglobulin M (IgM) and immunoglobulin G (IgG) responses after five days of the disease onset can also be utilized as indicators of COVID-19. As a result, reverse-transcription polymerase chain reaction (RT-PCR), gene sequencing, ELISA, and lateral flow immunoassay are the main diagnostic techniques at the moment [4, 76] . Nevertheless, the search for rapid and reliable point-of-care devices has triggered the development of plasmonic methods based on the latest technological advancements. For example, a novel approach combines the plasmonic photothermal (PPT) effect and LSPR sensing to detect DNAselected sequences via hybridization to DNA receptors immobilized on two-dimensional gold nanoislands (AuNIs) (Figure 15 ). This dual-functional plasmonic biosensor takes advantage of the PPT heat generated on the AuNIs' chip to increase the hybridization temperature and discriminate two similar gene sequences (RdRp genes) from SARS-CoV and SARS-CoV-2. A detection limit of 0.22 pM was obtained using a multigene mixture including the DNA sequences RdRp-COVID, open reading frame 1ab (ORF1ab)-COVID, and E genes from SARS-Cov-2. The thermoplasmonic enhancement also contributed to improve the stability of the assay by using two different angles of incidence to excite the plasmonic resonances of PPT and LSPR at two different wavelengths. Since the proposed method utilizes the same criteria for hybridization of nucleic acids, based on the decrease of the melting temperature than PCR-test, the potential to complement this technique is suggested. Nevertheless, the search for rapid and reliable point-of-care devices has triggered the development of plasmonic methods based on the latest technological advancements. For example, a novel approach combines the plasmonic photothermal (PPT) effect and LSPR sensing to detect DNA-selected sequences via hybridization to DNA receptors immobilized on two-dimensional gold nanoislands (AuNIs) (Figure 15 ). This dual-functional plasmonic biosensor takes advantage of the PPT heat generated on the AuNIs' chip to increase the hybridization temperature and discriminate two similar gene sequences (RdRp genes) from SARS-CoV and SARS-CoV-2. A detection limit of 0.22 pM was obtained using a multigene mixture including the DNA sequences RdRp-COVID, open reading frame 1ab (ORF1ab)-COVID, and E genes from SARS-Cov-2. The thermoplasmonic enhancement also contributed to improve the stability of the assay by using two different angles of incidence to excite the plasmonic resonances of PPT and LSPR at two different wavelengths. Since the proposed method utilizes the same criteria for hybridization of nucleic acids, based on the decrease of the melting temperature than PCR-test, the potential to complement this technique is suggested. Another innovative approach for COVID-19 diagnosis comprised the development of a colorimetric assay based on gold nanoparticles (AuNPs) functionalized with thiol-modified antisense oligonucleotides (ASOs) specific for N-gene (nucleocapsid phosphoprotein) of SARS-CoV-2 [76] . The biosensing scheme comprised the change in its SPR absorbance spectra with a red shift of ~40 nm when thiol-modified AuNPs agglomerated selectively in the presence of their target RNA sequence. This application also demonstrated that the addition of endonuclease Ribonuclease (RNAse H) leads to a visually detectable colorimetric change due to the agglomeration among the AuNPs, resulting from the cleaving of the RNA strand from the composite hybrid of RNA and Au-ASO composite. The assay selectivity was measured in the presence of MERS-CoV viral RNA, showing a limit of detection of 0.18 ng μL -1 of RNA with SARS-CoV-2 viral load. The main advantage of the proposed method was the possibility of being applied to target other regions of the viral genomic material, such as Sgene (surface glycoprotein), E-gene (envelope protein), and M-gene (membrane glycoprotein) without using sophisticated instrumental techniques. The uncertain proportions of pandemic outbreaks have triggered the need for reliable and costeffective protocols easily adaptable to the changing virulence of virus strains. In recent years, plasmonic biosensors are being increasingly applied for clinical diagnosis of viral and other infectious diseases. Typical plasmonic biosensing strategies rely on the versatility of SPR and LSPR as label-free detection systems capable of monitoring binding interactions in a short period of time. Nevertheless, the incorporation of technological advancements has precipitated the development of nanomaterialbased applications for improving the sensitivity and specificity of classical configurations. The unique optical properties of plasmonic nanostructures has been exploited in combination with SERS colorimetric, fluorescence, or luminescence enhancement for viral diagnosis. Likewise, the development of plasmonic virus-sensing approaches has also benefitted from the variety of virus biomarkers. Thus, a high number of virus plasmonic biosensors have prompted the advance of novel functionalization strategies to achieve the effective coverage of the biological receptor while ensuring the affinity and specificity towards the target viral nucleic acids, proteins, or whole virus. Figure 15 . Schematic representation of two-dimensional gold nanoislands functionalized with complementary DNA receptors, mapping the temperature distribution around the plasmonic photothermal (PPT) heat source and concentrations of various viral oligos measured using the dual-functional LSPR biosensors. An excitation laser with 532-nm peak wavelength and 40-mW maximum optical power was applied onto the gold nanoislands (AuNI) chip in the normal incident angle to improve the conversion efficiency of thermoplasmonic. Adapted with permission from Qiu et al. [75] Copyright © (2020) American Chemical Society. Another innovative approach for COVID-19 diagnosis comprised the development of a colorimetric assay based on gold nanoparticles (AuNPs) functionalized with thiol-modified antisense oligonucleotides (ASOs) specific for N-gene (nucleocapsid phosphoprotein) of SARS-CoV-2 [76] . The biosensing scheme comprised the change in its SPR absorbance spectra with a red shift of~40 nm when thiol-modified AuNPs agglomerated selectively in the presence of their target RNA sequence. This application also demonstrated that the addition of endonuclease Ribonuclease (RNAse H) leads to a visually detectable colorimetric change due to the agglomeration among the AuNPs, resulting from the cleaving of the RNA strand from the composite hybrid of RNA and Au-ASO composite. The assay selectivity was measured in the presence of MERS-CoV viral RNA, showing a limit of detection of 0.18 ng µL −1 of RNA with SARS-CoV-2 viral load. The main advantage of the proposed method was the possibility of being applied to target other regions of the viral genomic material, such as S-gene (surface glycoprotein), E-gene (envelope protein), and M-gene (membrane glycoprotein) without using sophisticated instrumental techniques. The uncertain proportions of pandemic outbreaks have triggered the need for reliable and cost-effective protocols easily adaptable to the changing virulence of virus strains. In recent years, plasmonic biosensors are being increasingly applied for clinical diagnosis of viral and other infectious diseases. Typical plasmonic biosensing strategies rely on the versatility of SPR and LSPR as label-free detection systems capable of monitoring binding interactions in a short period of time. Nevertheless, the incorporation of technological advancements has precipitated the development of nanomaterial-based applications for improving the sensitivity and specificity of classical configurations. The unique optical properties of plasmonic nanostructures has been exploited in combination with SERS colorimetric, fluorescence, or luminescence enhancement for viral diagnosis. Likewise, the development of plasmonic virus-sensing approaches has also benefitted from the variety of virus biomarkers. Thus, a high number of virus plasmonic biosensors have prompted the advance of novel functionalization strategies to achieve the effective coverage of the biological receptor while ensuring the affinity and specificity towards the target viral nucleic acids, proteins, or whole virus. Despite this substantial progress, current plasmonic applications have not yet outpaced conventional laboratory-based sequencing and immunoanalytical techniques. The improvement of sensing schemes has led to the attainment of ultrasensitive, robust, and reproducible analytical performances. However, the automation and integration of microfluidics as well as the prevention of nonspecific proteins' adhesion in complex media still remains a challenge in many cases. On the one hand, the fabrication of automatable point-of-care devices is strongly dependent on both the design of reliable microfluidics and the integration of advanced software in miniaturized platforms. In this sense, the utilization of novel flexible materials via nanopatterning lithographic approaches may facilitate the incorporation of microchannels that enable the delivery of microvolume samples without requiring additional equipment. Secondly, plasmonic virus detection from clinical specimens is still limited due to the lack of universal methods that prevent the interference of biomolecules present in undiluted body fluids. From this perspective, the design of effective antifouling coatings, which take into account either the composition of the media or the biological receptor's characteristics, will contribute to fill the gap between traditional analytical methods and plasmonics' applications. By addressing these challenges, the huge potential for single virus detection along with the effectiveness and simplicity of current plasmonic configurations will impact on the routine surveillance of virus in clinical settings during this decade. Surface Environmental, and Personal Protective Equipment Contamination by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) From a Symptomatic Patient Aerosol and Surface Stability of SARS-CoV-2 as Compared with SARS-CoV-1 Detection of SARS-CoV-2 in Different Types of Clinical Specimens Diagnostic methods and potential portable biosensors for coronavirus disease 2019 Monitoring Intact Viruses Using Aptamers Point of care testing for infectious diseases An Optofluidic Nanoplasmonic Biosensor for Direct Detection of Live Viruses from Biological Media Investigation of Plasmonic Detection of Human Respiratory Virus Plasmonic-based platforms for diagnosis of infectious diseases at the point-of-care Surface Plasmon Resonance: A Boon for Viral Diagnostics Rapid and simple PCR assay for quantitation of human immunodeficiency virus type 1 RNA in plasma: Application to acute retroviral infection Quantification of Viral Load: Clinical Relevance for Human Immunodeficiency Virus, Hepatitis B Virus and Hepatitis C Virus Infection Quantitation of cytomegalovirus: Methodologic aspects and clinical applications Plasmonic Nanomaterial-Based Optical Biosensing Platforms for Virus Detection Advancements in SPR biosensing technology: An overview of recent trends in smart layers design, multiplexing concepts, continuous monitoring and in vivo sensing Plasmonics in Sensing: From Colorimetry to SERS Analytics Plasmonics for future biosensors On-chip nanohole array based sensing: A review Gold Nanoparticles in Chemical and Biological Sensing Chemical Functionalization of Plasmonic Surface Biosensors: A Tutorial Review on Issues, Strategies, and Costs Plasmonic ELISA for the ultrasensitive detection of disease biomarkers with the naked eye Surface Plasmon Resonance Sensors for Detection of Chemical and Biological Species Portable and field-deployed surface plasmon resonance and plasmonic sensors Modern surface plasmon resonance for bioanalytics and biophysics Surface plasmon resonance sensing of nucleic acids: A review Plasmon-enhanced optical sensors: A review Plasmon-Based Colorimetric Nanosensors for Ultrasensitive Molecular Diagnostics Polymerization Amplified Detection for Nanoparticle-Based Biosensing Recent progress in SERS biosensing Plasmonic colorimetric and SERS sensors for environmental analysis Distance mediated electrochemiluminescence enhancement of CdS thin films induced by the plasmon coupling of gold nanoparticle dimers Critical assessment of relevant methods in the field of biosensors with direct optical detection based on fibers and waveguides using plasmonic, resonance, and interference effects Novel spectral fiber optic sensor based on surface plasmon resonance Metal Nanoparticles for Biosensing Applications Nanomaterials as efficient platforms for sensing DNA Noble Metal-Assisted Surface Plasmon Resonance Immunosensors Self-assembled magnetoplasmonic nanochain for DNA sensing Nanoparticle-Quantum Dot Fluorescent Nanohybrid: Application for Localized Surface Plasmon Resonance-induced Molecular Beacon Ultrasensitive DNA Detection HIV biosensors for early diagnosis of infection: The intertwine of nanotechnology with sensing strategies Heteroassembled gold nanoparticles with sandwich-immunoassay LSPR chip format for rapid and sensitive detection of hepatitis B virus surface antigen (HBsAg) Label-free localized surface plasmon resonance biosensor composed of multi-functional DNA 3 way junction on hollow Au spike-like nanoparticles (HAuSN) for avian influenza virus detection Localized surface plasmon resonance (LSPR) biosensor based on thermally annealed silver nanostructures with on-chip blood-plasma separation for the detection of dengue non-structural protein NS1 antigen Facile and rapid detection of respiratory syncytial virus using metallic nanoparticles A virus-based nanoplasmonic structure as a surface-enhanced Raman biosensor Graphene oxide wrapped with gold nanorods as a tag in a SERS based immunoassay for the hepatitis B surface antigen Versatility of a localized surface plasmon resonance-based gold nanoparticle-alloyed quantum dot nanobiosensor for immunofluorescence detection of viruses Fluorometric virus detection platform using quantum dots-gold nanocomposites optimizing the linker length variation Single-step detection of norovirus tuning localized surface plasmon resonance-induced optical signal between gold nanoparticles and quantum dots Localized surface plasmon resonance-mediated fluorescence signals in plasmonic nanoparticle-quantum dot hybrids for ultrasensitive Zika virus RNA detection via hairpin hybridization assays Quantitative and Selective Surface Plasmon Resonance Response Based on a Reduced Graphene Oxide-Polyamidoamine Nanocomposite for Detection of Dengue Virus E-Proteins Sensitive surface plasmon resonance performance of cadmium sulfide quantum dots-amine functionalized graphene oxide based thin film towards dengue virus E-protein Plasmonic/magnetic graphene-based magnetofluoro-immunosensing platform for virus detection Binary Nanoparticle Graphene Hybrid Structure-Based Highly Sensitive Biosensing Platform for Norovirus-Like Particle Detection Ultrasensitive Ebola Virus Antigen Sensing via 3D Nanoantenna Arrays Plasmonic Nanohole Sensor for Capturing Single Virus-Like Particles toward Virucidal Drug Evaluation Optical Trapping, Sizing, and Probing Acoustic Modes of a Small Virus Size and Temperature Dependence of the Plasmon Absorption of Colloidal Gold Nanoparticles Optical Sensors Based on II-VI Quantum Dots Amino-functionalized green fluorescent carbon dots as surface energy transfer biosensors for hyaluronidase Graphene-Based Materials for Biosensors: A Review Graphene and graphene oxide as nanomaterials for medicine and biology application Quantification of ovarian cancer markers with integrated microfluidic concentration gradient and imaging nanohole surface plasmon resonance Cost-effective flow-through nanohole array-based biosensing platform for the label-free detection of uropathogenic E. coli in real time Surface-Based Nanoplasmonic Sensors for Biointerfacial Science Applications Optical nanogap antennas as plasmonic biosensors for the detection of miRNA biomarkers Optical fiber sensor based on surface plasmon resonance for rapid detection of avian influenza virus subtype H6: Initial studies Direct detection of orchid viruses using nanorod-based fiber optic particle plasmon resonance immunosensor A novel immunosensor based on excessively tilted fiber grating coated with gold nanospheres improves the detection limit of Newcastle disease virus Plasmonics-Based Detection of Virus Using Sialic Acid Functionalized Gold Nanoparticles Highly Uniform Gold Nanobipyramids for Ultrasensitive Colorimetric Detection of Influenza Virus Advancement of capture immunoassay for real-time monitoring of hepatitis E virus-infected monkey A plasmonic colorimetric strategy for visual miRNA detection based on hybridization chain reaction Magnetic-plasmonic yolk-shell nanostructure-based plasmon-enhanced electrochemiluminescence sensor Distance-dependent plasmon-enhanced electrochemiluminescence biosensor based on MoS2 nanosheets Dual-Functional Plasmonic Photothermal Biosensors for Highly Accurate Severe Acute Respiratory Syndrome Coronavirus 2 Detection Selective Naked-Eye Detection of SARS-CoV-2 Mediated by N Gene Targeted Antisense Oligonucleotide Capped Plasmonic Nanoparticles Plasmonic colorimetric sensors based on etching and growth of noble metal nanoparticles: Strategies and applications The origin, transmission and clinical therapies on coronavirus disease 2019 (COVID-19) outbreak-An update on the status This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license Funding: This research received no external funding. The author declares no conflict of interest.