key: cord-0809247-w545nnez authors: Galeazzi, Alessandro; Cinelli, Matteo; Bonaccorsi, Giovanni; Pierri, Francesco; Schmidt, Ana Lucia; Scala, Antonio; Pammolli, Fabio; Quattrociocchi, Walter title: Human mobility in response to COVID-19 in France, Italy and UK date: 2021-06-23 journal: Sci Rep DOI: 10.1038/s41598-021-92399-2 sha: 688b9e163f29bfd3a4b7b11d01a51b16233eefcc doc_id: 809247 cord_uid: w545nnez The COVID-19 pandemic is one of the defining events of our time. National Governments responded to the global crisis by implementing mobility restrictions to slow down the spread of the virus. To assess the impact of those policies on human mobility, we perform a massive comparative analysis on geolocalized data from 13 M Facebook users in France, Italy, and the UK. We find that lockdown generally affects national mobility efficiency and smallworldness—i.e., a substantial reduction of long-range connections in favor of local paths. The impact, however, differs among nations according to their mobility infrastructure. We find that mobility is more concentrated in France and UK and more distributed in Italy. In this paper we provide a framework to quantify the substantial impact of the mobility restrictions. We introduce a percolation model mimicking mobility network disruption and find that node persistence in the percolation process is significantly correlated with the economic and demographic characteristics of countries: areas showing higher resilience to mobility disruptions are those where Value Added per Capita and Population Density are high. Our methods and findings provide important insights to enhance preparedness for global critical events and to incorporate resilience as a relevant dimension to estimate the socio-economic consequences of mobility restriction policies. www.nature.com/scientificreports/ their initial structure of inter-connections. The three countries exhibit differentiated mobility patterns that reflect the structural diversity in their underlying infrastructure: more centralized around their capital cities in the case of France and the UK, and more clustered in the case of Italy. Such infrastructural characteristics, together with different responses to national lockdown, contributed to the emergence of varied configurations in terms of residual mobility patterns. France shows one big cluster centered in Paris and many other smaller spots that disconnect as soon as the segregation process starts. Italy exhibits four interconnected clusters, centered approximately along the high-speed rail lines in Naples, Rome, Milan, and Turin, that remain interconnected over time thus showing a high persistence and resilience. Finally, the UK has one cluster centered in London, but most of England exhibits a higher persistence with respect to France and Italy, thus suggesting the presence of more capillary infrastructures. As a further step, we try to assess the impact of mobility restrictions by coupling our modeling approach to some economic indicators. Indeed, the correlations among mobility, disease spreading, and economic variables are crucial both in emergency scenarios and in ordinary times since the different resilience of mobility networks could be both a predictor of the severity of future systemic crises and a guide to improve the economic and social impact of policies. Hence the understanding of different resilience features in national mobility networks is fundamental to craft and tailor specific release policies, and to smooth the economic impact of NPIs. To obtain a first intuition of the reasons behind the different behaviors of the three countries in our sample, we address the correlation among nodes' persistence in the dismantling process and their economic and demographic features. We find a positive and significant relation between node persistence and, on the one side, production per capita (either measured by GDP per Capita or Value Added Per Capita) and on the other side with population density. However, the two relations are stronger for Italy and France and have a weaker effect in the UK, signaling that in this last case, as a consequence of the structural features of the capillary mobility network, also less populated and wealthy areas of Great Britain are showing high resilience to mobility disruption. We represent national mobility networks of France, Italy, and the UK as weighted directed graphs, built upon movement maps provided by Facebook through their "Data for Good" program 31 (see "Materials and methods" for further details). Notice that the analysis is limited solely to Italy, UK, and France because, at the time of the analysis, data comprising the lockdown dates were available only for these three countries. In our framework nodes correspond to municipalities and edges are weighted according to the amount of traffic between pairs of nodes. We first aggregate mobility flows in two symmetric disjoint time windows before and after the day of national lockdown (see Materials and Methods), as shown in panels (A-F) of Fig. 1 . By comparing mobility networks in the period before the intervention (panels A-C of Fig. 1 ) and during the lockdown phase, we note a significant reduction of the overall connectivity. We find that mobility restrictions have a higher impact on the connectivity of France, whereas they yield more limited effects in the other two countries. Italy and UK, indeed, show respectively a reduction of 16% and 21% in the size of the largest weakly connected component (LWCC, i.e., the maximal subgraph of a network in which any two vertices are interconnected through an un-directed path), whereas France exhibits a reduction of almost 79%. In panels G-I of Fig. 1 , we further characterize daily connectivity patterns by computing the number of weakly connected components (No. WCC) and the size of the LWCC of mobility networks constructed on a daily basis. In all cases, we observe a decrease in the LWCC size and an increase in the number of WCCs. We also observe periodic changes in correspondence with weekends, perhaps because of the reduced necessity to commute during weekdays. In France (where the LWCC is Paris-centric), we notice a strong fragmentation of the network since the beginning: the number of WCCs is larger than the size of the LWCC, suggesting that the mobility is well distributed along with the whole country. However, Paris remains connected by long-range connections to the remaining most active areas of Bordeaux, Toulouse, Marseille, and Lyon. In the case of Italy (where the LWCC contains all the main Italian cities distributed on the high-speed rail line, i.e. Naples, Rome, Milan, and Turin), the lockdown enhances the importance of local mobility. Notice that, while in the Center and South of Italy mobility remains defined mainly at the regional level (in Fig. 1E one can distinguish Sicilia, Campania, Lazio, and Toscana), the lockdown unveils that northern Italy is more interconnected, showing a clustered mobility for the main industrial regions, i.e. Piedmont, Lombardy, Veneto, and Emilia-Romagna. The UK is clearly London-centric: the size of the LWCC remains higher than the number of WCCs, with strong local mobility patterns only in the Bristol and in Manchester-Liverpool areas. The number of WCCs and the size of the LWCC reflect the different underlying structure of the three countries: France has a hub in Paris which is star-connected via long-range links to the local city-centered areas, Italian national mobility is distributed mostly over the center-northern region, and the UK appears as an extension of London, whose network of mobility remains pervasive even after the lockdown. We further investigate the effect of lockdown focusing on the global efficiency 33 of mobility networks, as shown in Fig. 2 . The global efficiency is a measure that quantifies how optimal is the information flow in a network and it can be used as a proxy to measure its smallworldness 33 (further details are reported in "Materials and methods"). We notice a decreasing trend of the efficiency in the period before national lockdown and a steady-state in the days after the intervention (Fig. 2) , which is consistent with the observed decrease in global connectivity (Fig. 1 ). Since the network efficiency is a measure that condensates information related to both clustering (i.e. connectedness of neighbors) and small-world effect (i.e. presence of long-range connections that act as shortcuts), the trends observed in top panels of Fig. 2 well describe the effect of an ongoing shock that cuts both long-range connections and the overall cohesiveness. Moreover, the three countries experience different amounts of decentralization as a consequence of the lockdown. To better quantify the differences, we measure the heterogeneity www.nature.com/scientificreports/ of nodes in terms of their contribution to global efficiency using the Gini index 34 (see "Materials and methods"). We first observe that, in correspondence with the initial decrease of global efficiency, the Gini index displays an increasing trend that becomes steady after the lockdown date (Fig. 2) . The observed trend means that the contribution of nodes to global efficiency becomes more and more heterogeneous over time until it reaches a steady-state. This result indicates a progressive disruption with very heterogeneous effects on the single nodes, suggesting that policies should be carefully tailored to avoid enhancing unequal treatments of different areas: as an example, in Italy, it has been observed that the lockdown could enhance economic disparities 29 among municipalities. Such an effect could be even more uttered in France, which shows a higher level of heterogeneity in connectivity at municipal level with respect to Italy. Indeed, in the French context disconnected nodes are more likely to remain isolated when compared to the Italian case, which exhibits a more distributed mobility network. We observe a more nuanced response to the shock in the UK, where mobility is distributed more evenly among distinct municipalities. To quantify the substantial effect of the mobility restrictions applied in France, Italy, and the UK in this section, we explore the drivers behind the empirical evidence reported in previous sections. We perform an analysis based on percolation theory 35 on the aggregated graph which corresponds to the period before the national lockdown. We assume that this setting is a good proxy for the structure of the mobility network in "business as usual" conditions (see "Materials and methods"). We implement bond percolation on the aggregated networks by iteratively deleting edges following an increasing (respectively decreasing) weight order. During the process www.nature.com/scientificreports/ of network dismantling, we keep track of measures related to both cohesiveness and distance, namely the LWCC size, global efficiency, and node persistence. In more detail, the node persistence measures the extent to which a node remains connected to the LWCC, that is, how much the node is resilient to percolation. Notice that several edge removal strategies can be considered to model different percolation processes and quantify different node characteristics. We tried several removal strategies based on different edge features such as weight, geographical distance, and edge betweenness. We chose edge weight removal strategy since it turns out to be the one that better approximates the real data (see "Materials and methods"). The top row of Fig. 3 shows the results of the percolation process in terms of node persistence, carried out by removing edges in increasing weight order for France, Italy, and the UK. To each node we assign an area on the map calculated using Voronoi tessellation 36 and colored according to node persistence (see "Materials and methods"). The empirical evidence displayed in previous sections finds support in the percolation results. Indeed, comparing the three cases, the differences in the network structure among countries emerge. While France has one big cluster centered in Paris and many smaller modules that disconnect as soon as the process occurs, Italy exhibits four interconnected clusters, centered approximately in Naples, Rome, Milan and Turin (that roughly correspond to the high-speed rail lines), that remain interconnected and thus showing high persistence levels. Conversely, UK has one cluster centered on London, but most of England exhibits a higher persistence with respect to France and Italy, thus suggesting the presence of a more resilient network with a very capillary structure. To compare the effects of the percolation dynamics on each of the three countries, in the middle and bottom rows of Fig. 3 we show trends for LWCC size and global efficiency throughout the process. We first notice that the decay of the LWCC size differs depending both on the country and edge removal strategy: removing edges sorted by decreasing weight affects less the decay of the LWCC size than removing edges sorted by increasing weight, for all countries. However, we see differences in the decay of LWCC size among the three nations in the increasing case: while France exhibits an almost linear trend, UK shows a significant drop only after an important amount of connections is removed. Moreover, Italy seems to be in an intermediate situation, showing an almost linear but scattered decay. We observe that the largest connected component is quickly disrupted when edges are deleted for increasing order of weights. Following results from network dismantling theory 37 , transportation networks generally exhibit higher vulnerability to such weak link removal and are more robust to the deletion of edges with higher weight. This effect can be explained by assuming a "rich club" structure 38 , where links corresponding to higher mobility flows are concentrated around core regions. Indeed, the largest fragility of the mobility network toward the deletion of weaker edges hints at a core-periphery structure. The bottom row of Fig. 3 displays the normalized global efficiency as a function of the residual edge. Also in this case, France has a smoother decay with respect to Italy and the UK, mainly when percolation is performed on increasing order of weights. Furthermore, when removing the same percentage of residual edges by increasing order of weights, UK yields the highest efficiency across countries. However, such a relationship changes when the opposite percolation strategy is taken into account. In this case, the UK has a slightly steeper decay of global efficiency, hinting the presence of a large number of strong connections among nodes. Again, we observe that To highlight the impact of the lockdown on actual mobility networks, we superimpose values in the networks observed across distinct weeks over the results of the percolation process. Each point in the curve corresponds to a certain statistic computed on the mobility network aggregated over each week (see "Materials and methods"). Mobility networks are divided into three categories based on the period taken into account: the weeks before the national lockdown, the week in which the lockdown took place, and the weeks after the lockdown. We observe that the residual amount of edges decreases over time and it differs from country to country. France displays the lowest percentage of residual edges, while Italy and the UK tend to retain a higher percentage of their edges. Moreover, we notice how Italy and UK strongly differ in terms of the evolution of LWCC size: although they lose roughly the same fraction of edges, there is a strong difference in terms of the number of connected nodes. Despite such differences, percolation by increasing order of weights approximates adequately Figure 3 . Results of the percolation process in terms of node persistence and edge removal strategies. A percolation process is performed by iterating a cutting procedure on edges according to their weights calculated in the whole period before lockdown. Top row: node persistence during the percolation process. Node persistence is defined as the number of iterations a node remains connected to the LWCC over the maximum number of iterations before the network is completely disconnected; the more persistent the node, the brighter the color. Notice that we are defining persistence upon deleting edges by their increasing strength: hence, brighter nodes are not only the last to be disconnected, but are also those embedded in stronger mobility flows. Middle row: size of the LWCC (largest weakly connected component) as a function of the number of residual edges. Green and blue curves correspond to deleting edges respectively in decreasing and increasing order of their weight. Bottom row: variation of global network efficiency obtained deleting edges by increasing (green) or decreasing (blue) weight. In both middle and bottom rows, we plot the "empirical" values of LWCC and global efficiency for the mobility networks calculated aggregating flows in the weeks before (dots), during (stars) and after (cross) the lockdown date. Notice that, while lockdown cut out the peripheries of national networks (middle panels, but see also panels (D-F) of Fig. 1) , the reduced mobility severely affects also the network efficiency (bottom panels). www.nature.com/scientificreports/ the decreasing trend of the LWCC size observed in all countries. The case of the normalized global efficiency is somewhat different: all countries show a similar loss proportionally to their initial efficiency. Additionally, the trend of the empirical curves is closer to that of the decreasing weight percolation strategy. The major difference observed between the middle and bottom rows of Fig. 3 is based on the fact that the considered empirical statistics follow opposite link removal strategies. This effect is due in part to the nature of the two measures; the former more related to the density and the structure of connections and the second more related to their weight. Overall, it is interesting to observe how the lockdown cannot be modeled by a removal strategy based only on edge weights. Rather, it is the result of a joint effect deriving from the removal of links based both on their structural importance and weight. As the last step in the analysis, we examine if the resilience of nodes in the network can be explained by specific economic and demographic characteristics. In the left panel of Fig. 4 , we plot the relation between Gross Domestic Product (GDP) Per Capita in 2016 and Node Persistence of the municipalities in the mobility network aggregated at the province level. Colors correspond to three countries in the sample and the size of the scatter points is proportional to the total population in the province for the year 2019. To eliminate the effect of outliers we calculate correlations removing the top 1% observations by GDP (results on the full sample are reported in Table 1 of section "Materials and methods"). We find an overall positive and significant correlation among the two variables (Pearson's R (P-R): P ∼ 0 R = 0.37 ; Spearman's Rho (S-R): P ∼ 0 R = 0.39 ; Kendall's Tau (K-T): P ∼ 0 R = 0.27 ) meaning that the most persistent nodes are often located in provinces where production per capita is higher, confirming the insights acquired when studying the patterns of country mobility resilience. However, by looking at the country-specific correlations (the colored dashed lines in the left panel of Fig. 4) we find that the positive relation is especially true for France and Italy while GDP per Capita in the UK has a weaker relation with Node Persistence. By looking at correlation coefficients for single countries (reported in "Materials and methods") we note that coefficients for Italy and France are higher and significant while UK correlation is lower and significant only at a significance level between 0.1 and 0.05. This finding is explained by the different patterns of resilience in the UK which is more equally distributed across municipalities without showing the emergence of a strong core-periphery structure. The relation between total population and persistence is instead less strong in the whole sample (P-R: P ∼ 0 R = 0.22 ; S-R: P ∼ 0 R = 0.32 ; K-T: P ∼ 0 R = 0.21 ) as also signaled by the absence of a visible pattern of the size of the scatter points. However, unlike the correlation with GDP per Capita, the weaker relation is significant We can conclude that Node Persistence is highly correlated with the wealth of provinces (either measured by Value Added Per Capita or, with a smaller effect, by GDP per Capita) and with the density and the size of the population on the territory. These effects are almost always stronger for Italy and France than for the UK. All in all, we can see how these features identify territories where urban areas and important cities create a strong modular structure with few central nodes and several peripheral zones, while in the case of the UK the territory is organized in a completely different manner. As a consequence, the economic effect of lockdown measures in these countries will certainly show a completely different spatial pattern which should be carefully analyzed. The COVID-19 pandemic is stressing the structural robustness of our societies. Most national governments have reacted to the contagion by applying mobility restrictions to contain the disease outbreak. The resulting disruption is similar to that caused by a natural disaster, but the effect is on a global scale. In this work, we analyze the effects of the lockdown in Italy, France, and the UK leveraging data from Facebook accounting for the movements of more than 13M individuals. We provide a framework to assess the effective impact of mobility restrictions and to perform a comparative analysis of the national mobility networks. We find that lockdown mainly affects national smallworldness-i.e., mobility restrictions yield a strong reduction of long-range connections in favor of local paths. Our analysis confirms that the national resilience to massive stress differs and depends upon the inner connectivity structure. Indeed, the three countries show very different mobility patterns that reflect the diversity of their underlying infrastructure, more concentrated in the case of France and UK, and more distributed in the case of Italy. Our analysis provides further insights into the interplay between human mobility, disease spreading and economic variables. Understanding the resilience of mobility networks can contribute to enhance the preparedness to future systemic crises and to improve our predictive capabilities on the economic and social impact of mobility restriction policies. Mobility data and networks. We analyzed human mobility leveraging data provided by Facebook through its "Data for Good" program 31 . The platform provides movement maps that are based on de-identified and aggregated information of Facebook users who enabled their geo-positioning. www.nature.com/scientificreports/ Movements across administrative regions (i.e. municipalities in our case) are aggregated with a 8-h frequency, and describe the amount of traffic flowing between two municipalities in a given time window. Similar to data analyzed in recent research on mobility restrictions applied in China 6,7 , Facebook does not really provide the number of people moving between two locations but rather an index, constructed with a proprietary method to ensure privacy and anonymization, that highly correlates with real movements 31 . We collected data relative to mobility in Italy, France and United Kingdom until April 15th, with different starting times depending on the availability of Facebook maps (respectively February 23th, March 10th and March 4th). The average number of daily users with their location enabled during the period of interest is 13, 669, 145 (France: 4, 110, 226; UK: 5, 801, 979; Italy: 3, 786, 940) . For the sake of our analysis we represent mobility flows using a weighted directed graph where nodes are municipalities and edges are weighted based on the amount of traffic flowing between two locations. To represent mobility networks before/during lockdown we aggregate daily traffic on windows of 12-13-14 days (respectively for France, UK and Italy) before/after the day of intervention depending on the availability of data. From these data, we build several graphs for each country. We consider a directed daily graph at municipality levels, where there can be only one edge per day from municipality A to municipality B, whose weight is the daily sum of all edges from A to B. The same procedure is applied for building aggregate networks at different time scales such as weekly graphs of pre/post lockdown graphs. Network efficiency. The efficiency is a global network measure that combines the information deriving from the network cohesiveness and the distance among the nodes. It measures how efficiently information is exchanged over the network 33 and it can be defined as the average of nodal efficiencies e ij among couples of vertices of the network. Given a weighted network G(V, E) with n = |V | nodes and m = |E| edges, the connections of G are represented by the weighted adjacency matrix W with elements {w ij } where w ij ≥ 0 ∀ i, j. The global efficiency can be written by means of the following expression: where d ij is the distance between two generic nodes i and j, defined as the length of the shortest path among such nodes. The shortest path length d ij is the smallest sum of the weights w ij throughout all the possible paths in the network from i to j. When node i and j cannot be connected by any path then d ij = +∞ and e ij = 0 . Following the methodology of 33 , the global efficiency E glob (G) is normalized in order to assume maximum value E(G) = 1 in the case of perfect efficiency. In such a setting the nodal efficiency, i.e. the contribution of each node to the global efficiency, can be simply written as: Beside the geographical distance between two nodes of the graphs, proximity can also be defined considering that two locations are closer if many movements happen between them. To compute network efficiency in our case we use the reciprocal of weights on links to obtain the shortest path distance among couples of nodes. Gini index. The Gini index is a classic example of a synthetic indicator used for measuring inequality of social and economic conditions. The Gini index can be defined starting from the Gini absolute mean difference 39 of a generic vector y with n elements, that can be written as: The relative mean difference is consequently defined as �/µ y where µ y = n −1 n i=1 y i . Thus, the relative mean difference equals the absolute mean difference divided by the mean of the vector y. The Gini index g is one-half of the Gini relative mean difference. Values of g ∼ 1 signal that the considered vector displays high inequality in the distribution of its entries, while values of g ∼ 0 signal a tendency towards equality. Percolation process and node persistence. To measure the extent to which a node resists to percolation process, we define the following quantity as node persistence. Consider a graph G with nodes V = {v 1 , . . . , v k } and edges E = {e 1 , . . . , e h } . Let S : E � → R + be a function that assign a finite positive real number w l , l ∈ 1 . . . h to each edges e 1 , . . . , e h of the network. For instance, S can be the function that assigns each edge its weight or its position in the edge ranking for a certain metric, e.g edge betweenness. More simply, S can be seen as a function that assigns a removal order to the edges. Consider the finite set W = [w 1 , . . . , w n+1 ] of the distinct values taken by w l , with w 1 < w 2 < · · · < w n+1 . Suppose that we run a percolation process that consists of sequentially deleting edges according to the values assigned by S to each edge in increasing order, that is, in the first iteration we www.nature.com/scientificreports/ delete all the edges with w l less or equal than w 1 , in the second iteration we delete all the edges with weights less or equal than w 2 and so on until the last iteration, n + 1 , where we delete all the edges in the network. Notice that there is no loss of generality in considering only increasing order, since the S function can be arbitrarily defined. Thus, at iteration i, we delete all the edges with w l less or equal than w i . Consider now a node v j ∈ V. At each step of the process, v j may or may not be part of the LWCC of the network G. Clearly, if v j does not belong to the LWCC of G at step i, it will not be in the LWCC of G at step i + 1, i + 2, . . . , n + 1 . Defining M v j as the maximum number of iterations i such that v j belongs to the LWCC of G, the persistence of node v j respect to the ordering induced by function S is defined as: That is, if the whole process takes n + 1 iterations to disconnect the whole network, the persistence of a node v j respect to the function S is defined as the maximum number of iterations for which v j is connected to the LWCC over the maximum number of iteration for which there are connected nodes in the network. Notice that several instances of the function S and several edge removal strategies can be considered to model different percolation processes. We tried several removal strategies based on different edge features such as weight, geographical distance, and edge betweenness. Since our goal is to mimic the disruption of the countries' mobility networks, we focus on the one that better approximates the networks' connectedness over time, which turned out to be increasing edge weight ( Supplementary Information 1) . For what concerns Facebook human mobility, all data are provided under an academic license agreement with Facebook through its "Data for Good" program (available at https:// dataf orgood. fb. com/ tools/ disea se-preve ntion-maps/). Facebook releases data upon request to nonprofit organization and academics. Economic data have been obtained from Eurostat and are available at https:// ec. europa. eu/ euros tat/ data/ datab ase. Covid-19 and Italy: What next? Effect of non-pharmaceutical interventions to contain COVID-19 in China Reshaping a nation: Mobility, commuting, and contact patterns during the COVID-19 outbreak Population mobility reductions during COVID-19 epidemic in France under lockdown The effect of non-pharmaceutical interventions on COVID-19 cases, deaths and demand for hospital services in the UK: A modelling study The effect of travel restrictions on the spread of the 2019 novel coronavirus (COVID-19) outbreak The effect of human mobility and control measures on the COVID-19 epidemic in China Mobile phone data for informing public health actions across the COVID-19 pandemic life cycle Spread and dynamics of the COVID-19 epidemic in Italy: Effects of emergency containment measures What will be the economic impact of COVID-19 in the US? Rough estimates of disease scenarios How will country-based mitigation measures influence the course of the COVID-19 epidemic The global macroeconomic impacts of COVID-19: Seven scenarios Understanding individual human mobility patterns A statistical framework for measuring the temporal stability of human mobility patterns Controlling epidemics in realistic urban social networks Aggregated mobility data could help fight COVID-19 The scaling laws of human travel Diffusion in disordered media Modelling the scaling properties of human mobility Limits of predictability in human mobility Human mobility: Models and applications Collective response of human populations to large-scale emergencies Predictability of population displacement after the 2010 Haiti earthquake Quantifying human mobility perturbation and resilience in hurricane sandy Patterns and limitations of urban human mobility resilience under the influence of multiple types of natural disaster Leveraging twitter to gauge evacuation compliance: Spatiotemporal analysis of hurricane Matthew Impacts of state-level policies on social distancing in the United States using aggregated mobility data during the COVID-19 pandemic Nisrine and Majumder, Maimuna, Democracy and Mobility: A Preliminary Analysis of Global Adherence to Non-Pharmaceutical Interventions for COVID-19 Economic and social consequences of human mobility restrictions under COVID-19 Mapping global variation in human mobility Facebook disaster maps: Aggregate insights for crisis response and recovery Percolation transition in dynamical traffic network with evolving critical bottlenecks Efficient behavior of small-world networks Measurement of inequality of incomes Percolation theory Nouvelles applications des paramètres continus à la théorie des formes quadratiques. deuxième mémoire. Recherches sur les parallélloèdres primitifs A comparative analysis of link removal strategies in real complex weighted networks The rich-club phenomenon in the internet topology The Advanced Theory of Statistics, Distribution Theory Author contributions: A.G., M.C., A.S., G.B., F.P. and W.Q. designed research; A.G., M.C., A.S., G.B. and W.Q. performed the research; A.G., M.C., A.S., G.B., F.P., A.L.S., F.P., and W.Q. wrote the paper; A.G., M.C., G.B., F.P., A.L.S., collected the data. The authors declare no competing interests. The online version contains supplementary material available at https:// doi. org/ 10. 1038/ s41598-021-92399-2.Correspondence and requests for materials should be addressed to A.G.Reprints and permissions information is available at www.nature.com/reprints.Publisher's note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http:// creat iveco mmons. org/ licen ses/ by/4. 0/.