key: cord-0803094-ty5cfq52
authors: Alharthi, Sarah; Attia, M. S.; Abou-Omar, M. N.
title: pH assists simultaneous determination of folic acid and vitamin D(3) in biological fluids using a novel Tb(3+)–acyclovir optical biosensor
date: 2021-06-11
journal: RSC advances
DOI: 10.1039/d1ra02396a
sha: 2f6753ffd87d8f77c11a6b8cbd432b981073951f
doc_id: 803094
cord_uid: ty5cfq52

An innovative, simple and cost effective Tb(3+)–acyclovir photo probe was designed and used as a core for a spectrofluorometric approach to sensitively determine two vital biological compounds in different matrices. The Tb(3+)–acyclovir complex displays a characteristic electrical band with λ(em) at 545 nm with significant luminescence intensity, which is quenched in the presence of folic acid and vitamin D(3) at pH 5.0 and 9.0, respectively. The conditions were optimized and the best solvent for operation was found to be acetonitrile and λ(ex) at 340 nm. folic acid was successfully estimated in tablet dosage form, urine and serum in the concentration range of 2.28 × 10(−6) to 1.49 × 10(−9) mol L(−1). Vitamin D(3) was also assessed in serum samples using the same optimal conditions within the concentration range of 3.2 × 10(−9) to 1.0 × 10(−6) mol L (−1). The proposed luminescence method was validated in accordance with ICH guidelines and found to be accurate, precise and specific and free from any interferences. The cost effectiveness and applicability of the method make it a good choice for routine analysis of the two compounds and early diagnosis of chronic diseases associated with abnormalities in their physiological levels.

Folic acid (FCA), vitamin B9, is one of the water-soluble vitamins 1 found naturally in various types of foods such as legumes, leafy green vegetables, wheat germs, beets, broccoli, citrus fruits, fermented products, beef liver and eggs. FCA is an essential supplement for pregnant women in the rst trimester to avoid birth abnormalities including congenital heart diseases and neural tube defects and autism. 2,3 FCA is essential for DNA and RNA production and amino acid metabolism. 4, 5 Untreated deciency of FCA is linked with different health problems, including neurological and psychological manifestations like psychosis, depression, insomnia and Alzheimer's disease, and an increased risk of cancer and osteoporosis. 6, 7 Elevated levels of homocysteine, a biomarker for arteriosclerosis, are also associated with FCA deciency. Other symptoms include poor cognitive performance, hearing loss and other symptoms including fatigue, heart palpitations, shortness of breath, hair and skin discoloration, mouth sores, and a swollen tongue. 5, 6 Different analytical techniques were reported in the literature for FCA determination in dosage form, dietary supplements, beverages and biological samples including spectroscopy 8, 9 and chromatography 10, 11 and electrochemistry. 12, 13 The chemical structure of folic acid is presented in (Fig. 1) .

Vitamin D 3 , one of fat-soluble vitamins, is naturally found in different types of foods as oily or fatty sh, dairy products, beefy liver and egg yolk and synthetized endogenously in human body upon exposure to sun. Vit. D 3 is converted to its active form through two successive hydroxylation steps forming calcidiol (25-hydroxyvitamin D) in liver followed by calcitriol (1,25-dihydroxyvitamin D) in kidney. It has a major role in regulation concentration of phosphate and calcium in serum and essential in bone remodeling and growth. 14, 15 It is also used to improve the cognitive functions and in treatment of specic type of psoriasis. In addition, it contributed in the management of Covid-19 by reducing the cytokine storms and thrombotic episodes associated with the infection. 16 The deciency of Vit. D may lead to serious conditions as rickets and osteomalacia in young and adults, respectively. 17 Low levels of Vit. D is also associated with increased risk of colon and pancreatic cancer respiratory acute infections. 18, 19 On the other hand, the excessive intake of Vit. D may increase the levels of calcium both in so tissues (calcinosis) and blood (hypercalcemia). To evaluate the status of Vit. D in human body, calcidiol level in blood is used as best indicator. The chemical structure of Vit. D is displayed in (Fig. 1 ). In the last decade, several methods have been routinely used in the quantication of vitamin D, including competitive protein-binding (CPB) assays, radioimmunoassays (RIA), chemiluminescence immunoassays (CLIA), liquid chromatography (LC) with UV detection, and liquid chromatography-mass spectrometry (LC-MS) or tandem mass spectrometry (LC-MS/MS). In clinical practice, CPB, RIA and CLIA remain the most widely applied assays. [20] [21] [22] [23] [24] [25] The reported methods showed relatively high limits of detection which restricts their practical applications. Moreover, the measurement of low concentrations of folic acid and vitamin D 3 in biological samples along with interference from some biomolecules such as uric acid (UA), ascorbic acid (AA), and different hormones requires to efficiently improve the sensitivity of chromatographic methods and the electrochemical sensors for practical applications. Therefore, developing a simple method for accurate determination of folic acid and vitamin D 3 in the presence of each other in the same sample is still of great signicance. Today, the research eld in which the lanthanide complexes were used as biosensors has a great interest. Luminescent optical biosensor Tb-acyclovir (Tb-ACV) complex embedded in PEG matrix have many advantages over the mentioned traditional methods. Terbium ion has sharp and precise emission bands in green light region. The terbium ion is used as photo probe for many analytes with a high selectivity depends on the excitation wavelength of terbium-analyte complex, pH and the type of solvent of the test solution. Doping of the optical sensors in the polymer matrix increases its stability and durability. [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] The sensor can provide a constant signal response for two years, which makes it 24-fold better balance compared to the lifetime warranted for the chromatographic and electrochemical methods. The source of error of the present work eliminated as it more stables for a long time; it gives a low standard deviation value. The higher stability of the current sensor can be attributed to the doping of the optical sensor in the polymer matrix (Fig. 2 ).

A double beam UV-visible spectrophotometer (PerkinElmer Lambda 25), uorescence spectrometer (Thermo Scientic Lumina, Meslo-PN; 222-263000). pH meter (Jenway; 33300).

Pure folic acid standard was kindly supplied by the National Organization for Drug control and Research (Giza, Egypt). Pharmaceutical preparation of folic acid tablets dosage form labelled to contain 500 mg manufactured by Mepaco-Medifood (Arab Company for Pharmaceutical and Medicinal plants, Egypt) was purchased from community pharmacy in the Egyptian market. vitamin D 3 , solvents including ethanol, acetonitrile, dimethylformamide (DMF), chloroform and dimethyl sulfoxide (DMSO) were purchased from Sigma Aldrich. Analytical grade ammonium hydroxide (NH 4 OH), hydrochloric acid (HCl), Tb(NO 3 ) 3 $5H 2 O, acyclovir and polyethylene glycol (PEG) were purchased from Sigma Aldrich.

The human real samples were gathered from both Ain Shams Specialized and Teaching New Al-Kasr-El-Aini Hospitals, Cairo, Egypt in accordance with the approved protocol of World Health Organization (WHO) for the collection of human specimens and the use of the clinically related information and data for the purpose of research. The patients approved and were all consented before using their samples. All serum samples collection and separation procedures were performed in accordance with the Guidelines for Care and Use of Clinical Laboratory of Ain Shams University and approved by the Clinical Ethics Committee of Faculty of Medicine, Ain Shams University.

Stock solutions of Tb(NO 3 ) 3 $5H 2 O and acyclovir; were prepared separately by accurately weighing and transferring 0.11 g and 0.039 g, respectively of their authentic pure forms into separate 25 mL volumetric asks by the aid of the least amount of ethanol till dissolution and completing the volume with the same solvent to obtain nal concentration of (10 À2 mol L À1 ) for each of them.

Tb 3+ -Acyclovir complex solution; was prepared by mixing 0.1 mL of Tb(NO 3 ) 3 stock solution with 0.3 mL of acyclovir stock solution in 10 mL volumetric ask and completing the volume to the mark with acetonitrile.

For the four compounds under study, all stock solutions were separately prepared in 10 mL volumetric asks in concentration of solution (10 À2 mol L À1 ). This was achieved by dissolving 0.044 g of FCA in least amount of DMF and then completing the volume to the mark using acetonitrile. For Vit. D 3 0.033 g was dissolved in small amount of ethanol and then volume was diluted to the mark with acetonitrile. Further dilutions for the stock solutions using acetonitrile were performed to obtain working solutions with concentrations of 1.0 Â 10 À4 to 1.0 Â 10 À9 mol L À1 of FCA and Vit. D 3 .

0.1 mol L À1 of NH 4 OH and HCl were used to adjust the pH to 9.0 and 5.0 for FCA and Vit. D, respectively. All of the prepared solutions should be kept at low temperature (2-8 C) to remain stable.

Ten tablets of folic acid 500 mg were weighed and grinded into ne homogenous powder. The average weight of one tablet was calculated and dissolved in few mL of DMF and sonicated for 20 minutes. The solution was then ltered using Whatman lter papers (12 mm) into 10 mL volumetric ask to obtain nal concentration of FCA equivalent to 1.1 Â 10 À3 mol L À1 . Further dilution was performed to obtain different solutions with concentration range of (1.0 Â 10 À4 to 1.0 Â 10 À7 mol L À1 ) was prepared by appropriate dilution with acetonitrile.

The urine sample was collected from a healthy volunteer who didn't administer any previous medications, it was then manipulated in the lab as follows; 10 mL of the collected urine sample were centrifuged at 4000 rpm for 15 min to remove all interferants including crystals, salts, pus and red blood cells.

1.0 mL of urine was spiked with 1.0 mL of previously prepared drug solution with concentration of 1.0 Â 10 À6 mol L À1 and completed by acetonitrile to the mark in 10 mL measuring ask.

A 1.0 mL of samples of blood collected from healthy volunteers was centrifuged for 15 min at 4000 rpm to remove proteins. 0.1 mL of the serum sample was added to 1.0 mL of each drug working solution of concentration 1.0 Â 10 À6 mol L À1 and the volume was complete to 10 mL by acetonitrile to obtain 1.0 Â 10 À7 mol L À1 for each drug in four separate 10 mL measuring asks.

Tb-ACV complex was prepared in the solid state by mixing an equal volume of 1.0 Â 10 À4 mol L À1 Tb ion and 3.0 Â 10 À4 mol L À1 acyclovir in ethanol, then evaporation near the dryness of the solution, a pale pink solid was obtained aer cooling in air. The thin lm was prepared by dissolving 0.1 g of the solidied and seamless complex in 3 mL ethanol and then adding 10 mL of viscose freshly prepared PEG with stirring for about one hour until a homogenous solution was obtained. A thin lm was fabricated by spin-coating on a small quartz slide (width 8.5 mm, height 25 mm) to quick t in the cuvette of the spectrouorometer.

An appropriate volume (100 mL) of various standard concentrations of folic acid and vitamin D 3 should be diluted to 3 mL with acetonitrile. The dilute solution was mixed with a thin lm of biosensor Tb-ACV doped in PEG matrix in the quartz cell of a spectrouorometer. The luminescence spectra were recorded at the excitation wavelength l ex ¼ 340 nm. Aer each measurement, the optical sensor was washed with acetonitrile, and the calibration curve was built by applying the Stern's Volmer equation by plotting (F/F 0 ) the at l em ¼ 545 nm on the yaxis versus the folic acid and vitamin D 3 concentration in mol L À1 on the x-axis.

The tablet dosage form solutions previously prepared under (2.4) were analyzed using the following procedures: in the spectrouorimeter cell, 1.0 mL of the tablet solutions was separately added followed by the 1.5 mL of acetonitrile in presence of the biosensor lm. Aer mixing, the obtained solutions were scanned and luminescence spectra were recorded at l ex /l em ¼ 340/545 nm. The concentrations of the real samples were calculated using corresponding regression equation.

The luminescence spectra of the previously prepared spiked urine samples as detailed under (2.5) were scanned at l ex /l em ¼ 340/545 nm and the concentration of spiked FCA was determined using the corresponding regression equation adopting the standard addition technique.

The luminescence spectra of the serum samples previously prepared as described under (Section 2.6) were measured adopting the same procedures followed under (Section 3.2). The concentrations of each real sample were calculated using corresponding regression equation.

Owing to the f-f transition forbiddance of trivalent ion (Tb 3+ ), there is a restriction to directly absorb light which could be overcome through the antenna effect via the coupling between Tb 3+ and a prominently absorbing organic ligand leading to efficient energy transfer and light absorption processes. Regarding the proposed photo probe, Tb 3+ is surrounded covalently by 3 molecules of acyclovir ligand responsible for efficient absorption of light and transfer of energy to populate 5 D 4 state of Tb 3+ . 44 The emission of the formed complex Tb-ACV exhibited four specic and intense bands because of the 5 D 4 -7 F J transitions (J ¼ 6, 5, 4 and 3). 44 

The absorption spectra of 1.0 Â 10 À4 mol L À1 acyclovir (spectrum 1), 3.0 Â 10 À4 mol L À1 acyclovir + 1.0 Â 10 À4 mol L À1 Tb 3+ (spectrum 2) and 1.0 Â 10 À4 mol L À1 acyclovir + 3.0 Â 10 À4 mol L À1 Tb 3+ (spectrum 3) are shown in Fig. 3 . The spectrum contains three peaks at 250 nm, 286 nm and 382 nm due to p / p* and n / p* transitions in organic moiety of acyclovir. Peaks at 250 and 286 nm are red shied by 2 nm and the absorbance value is enhanced denoting that acyclovir could form a stable complex with Tb 3+ . The absorption spectra of FCA and Vit. D 3 were scanned alone and in the presence of the optical sensor are shown in Fig. 4 . Upon addition of FCA and Vit. D 3 to the optical sensor Tb-acyclovir the two peaks at 250 and 286 are disappeared and a red shi by 5 nm at 382 nm was obtained. The emission spectra of Tb 3+ -acyclovir complex aer adding different concentrations of FCA and Vit. D 3 using acetonitrile as solvent are shown in Fig. 5 and 6 , respectively. The characteristic electrical emission band of Tb 3+ exhibited at l em 545 nm was quenched due to energy transfer from the optical sensor to FCA and Vit. D 3 .

3.3.1. Tb 3+ and acyclovir amounts. The Tb 3+ -acyclovir complex was formed in ratio 1M : 3L indicating that the metal Fig. 3 The absorption spectra of (1) acyclovir (1.0 Â 10 À4 mol L À1 ), (2) acyclovir (3.0 Â 10 À4 ) + Tb 3+ (1.0 Â 10 À4 mol L À1 ) and (3) acyclovir (1.0 Â 10 À4 ) + Tb 3+ (3.0 Â 10 À4 mol L À1 ) complex in acetonitrile. 3.3.2. Solvent effect. The intensity of luminescence of solutions containing Tb 3+ (1.0 Â 10 À4 mol L À1 ) and acyclovir (3.0 Â 10 À4 mol L À1 ) was investigated in different solvents and the results revealed that maximum enhancement was noticed in acetonitrile as presented in Fig. 8 . Solvents with hydroxyl group as ethanol diminishes the luminescence intensity due to transfer of vibrational energy to molecules of solvents. [39] [40] [41] [42] [43] [44] [45] [46] 3.3.3. pH effect. The medium pH has a signicant inuence on the luminescence intensity of the formed Tb 3+ -acyclovir complex. Solutions of NH 4 OH and HCl, both 0.1 mol L À1 were used for pH adjustment. The highest luminescent intensity at l em 545 nm was observed at pH ¼ 10.0 as shown in Fig. 9 . Because all activation sites in the acyclovir are available at pH 10 to make a good complex with Tb ion and good energy transfer from the triplet energy state of acyclovir to 5 D 4 of Tb ion.

Upon adding different concentrations of FCA and Vit. D 3 to the Tb-ACV photo probe a notied quenching in its luminescent intensity occurs owing to the approach of the analytes under study and formation of H-bond between the hydroxyl group in Vit. D 3 and carboxylic group in FCA with the acyclovir. The formation of H-bonding lead to the depression or decrease in the transfer of energy to the Tb 3+ ion and consequently the luminescence intensity is signicantly quenched.

The pH effect on the luminescence intensity aer the addition of the studied analytes to the proposed photoprobe was studied and the luminescence quenching was observed at pH 5.0 and 9.0 for FCA and Vit. D 3 , respectively.

Correlations between the luminescence of emission intensity of optical sensor at l em 545 nm and FCA and Vit. D 3 within concentration ranges of (2.28 Â 10 À6 to 1.49 Â 10 À9 ) and (3.2 Â 10 À9 to 1.0 Â 10 À6 ) mol L À1 respectively were found to be linear as presented in respective calibration graphs, Fig. 10 and 11 obtained by applying the Stern-Völmer plot. The Stern-Völmer constant and critical concentration of FCA and Vit. D 3 values are (k sv ¼ 3.21 and 1.40) and (0.005 Â 10 À7 to 3.18 Â 10 À7 and 4.9 Â 10 À10 to 4.8 Â 10 À7 ) mol L À1 respectively.

The distance between the cited compounds and the ionophore is 3.16 A indicating the electron transfer mechanism of quenching. The regression equations were computed and the regression parameters in addition the LOD and LOQ were calculated and results were presented in Table 1 .

The accuracy of the developed method was further investigated via applying the standard addition technique and calculating the recovery %. Assessing the obtained recovery was performed through determination of agreement extent between the measured and actual added standard concentration of analyte. All assays were repeated 3 times within the same day and different days to assess the repeatability and intermediate precision, respectively. Three different levels of the analyte concentrations were used in the assays and the results were summarized and presented in (Table 2 ).

The selectivity of the proposed method was investigated through analyzing placebo blank and synthetically prepared mixtures. All possible interfering inactive compounds were used to prepare a placebo containing; 50 mg calcium carbonate, 20 mg calcium dihydrogen orthophosphate, 30 mg lactose, 100 mg magnesium stearate, 40 methyl cellulose, 70 mg sodium alginate, 300 mg starch and 250 mg Talc. Extraction was performed using water and the solution was manipulated as detailed under 2.4. A suitable aliquot of the obtained solution was analyzed aer the addition of the optical sensor Tb 3+acyclovir and the luminescence spectra were recorded at l ex /l em ¼ 340/545 nm following the optimized conditions.

The validity and selectivity were further assessed in presence of some proteins and hormones that may interfere as cortisol, thyroid stimulating hormone, norepinephrine, dopamine and albumin within concentration range of 0.08 g L À1 . The interference of 0.06 g L À1 urea, 0.08 g L À1 glucose, uric acid and folic acid was also studied and the resulting data revealed that there was no signicant effect on the observed luminescence activity of the proposed photo probe under optimized conditions. In addition, the proposed optical probe was successfully applied for selective determination of FCA and Vit. D 3 either as single or in combination in synthetically prepared mixtures. Two synthetic mixtures were prepared by adding different concentrations of FCA and Vit. D 3 within their linearity range in 2 similar sets of 10 mL volumetric asks containing 1.0 ml of the serum sample as mentioned under 2.6.

The pH of the rst set was adjusted to 5.0 for selective determination of FCA in presence of Vit. D 3 and the pH of the second set was adjusted to 9.0 for the determination of Vit. D 3 in 1 nmol L À1 50 HPLC-APCI-MS 5-400 nmol L À1 1-4 nmol L À1 51 Spectrouorometric using Tb 3+ -ACV 2.2 Â 10 À6 to 1.0 Â 10 À9 mol L À1 1.6 Â 10 À9 mol L À1 Folic acid LC-MS/MS 4.5 Â 10 À8 to 5 Â 10 À10 mol L À1 5 Â 10 À10 mol L À1 52 Chemiluminometric and uorimetric determination 114-6.0 mg mL À1 2.0 mg mL À1 53 1.10-0.022 mg mL À1 0.002 mg mL À1 Chemiluminescence 8 Â 10 À7 to 6 Â 10 À9 mol L À1 6 Â 10 À103 mol L À1 54 HPLC method 2500 to 50 mg mL À1 1.3 ng mL À1 55 Spectrouorometric method: FA-Tb 3+ -ACV 2.28 Â 10 À6 to 1.49 Â 10 À9 mol L À1 1.99 Â 10 À9 mol L À1 presence of FCA and the volume was completed with acetonitrile for the two sets. Thus, each mixture was prepared 2 times but at different pH (5.0 and 9.0) for selective estimation of FCA and Vit. D 3 , respectively. Each solution was in triplicates and yielded recovery % of 99.60 AE 0.47 and 101.9 AE 2.20 for FCA and Vit. D 3 , respectively. Also, the data obtained upon assaying single Vit. D 3 separately in serum sample and FCA in serum, urine and dosage form, without any interference from inactive excipients, was processed and results were tabulated as shown in Table 3 . The results of the proposed method were comparable to that obtained from the reference chromatographic methods mentioned in the British pharmacopeia. 50 

The results obtained from the proposed spectrouorometric technique was compared with obtained from other previously reported methods 51-61 assuring the applicability, accuracy and precision of the proposed method as presented in Table 4 .

The proposed analytical method based on the use of Tb 3+acyclovir complex is simple and economic and can be successfully applied for sensitive and accurate determination of folic acid and vitamin D 3 in different matrices including dosage forms, urine and serum. The analysis of the FCA and Vit. D 3 in biological samples can contribute in early diagnosis of some chronic diseases associated with their abnormal levels.

There are no conicts to declare.

Communicating current research and educational topics and trends in applied microbiology

Discovering Nutrition

25-Hydroxyvitamin D testing: challenging the performance of current automated immunoassays

Analytical variability among methods for the measurement of 25-hydroxyvitamin D: Still adding to the noise

Evaluation of two automated immunoassays for 25-OH vitamin D: Comparison against LCMS/MS

Evaluation of the cross-reactivity of 25-hydroxyvitamin D2 on seven commercial immunoassays on native samples

Discrepancy between vitamin D total immunoassays due to various crossreactivities

Accuracy of 6 routine 25-hydroxyvitamin D assays: inuence of vitamin D-binding protein concentration

Lanthanide Luminescence: Photophysical, Analytical and Biological Aspects

Guideline IHT, Validation of analytical procedures: text and methodology, Q2 (R1)

British pharmacopoeia 2009

Sarah Alharthi thanks Taif University Researchers Supporting Project (TURSP-2020/200), Taif University, Taif, Saudi Arabia, for supporting this work.