key: cord-0772918-sofkc9bh
authors: Dallinger, Doris; Gutmann, Bernhard; Kappe, C. Oliver
title: The Concept of Chemical Generators: On-Site On-Demand Production of Hazardous Reagents in Continuous Flow
date: 2020-06-16
journal: Acc Chem Res
DOI: 10.1021/acs.accounts.0c00199
sha: 4f92e05ffcd556ef47506e92c70731561ed32393
doc_id: 772918
cord_uid: sofkc9bh

[Image: see text] In recent years, a steadily growing number of chemists, from both academia and industry, have dedicated their research to the development of continuous flow processes performed in milli- or microreactors. The common availability of continuous flow equipment at virtually all scales and affordable cost has additionally impacted this trend. Furthermore, regulatory agencies such as the United States Food and Drug Administration actively encourage continuous manufacturing of active pharmaceutical ingredients (APIs) with the vision of quality and productivity improvements. That is why the pharmaceutical industry is progressively implementing continuous flow technologies. As a result of the exceptional characteristics of continuous flow reactors such as small reactor volumes and remarkably fast heat and mass transfer, process conditions which need to be avoided in conventional batch syntheses can be safely employed. Thus, continuous operation is particularly advantageous for reactions at high temperatures/pressures (novel process windows) and for ultrafast, exothermic reactions (flash chemistry). In addition to conditions that are outside of the operation range of conventional stirred tank reactors, reagents possessing a high hazard potential and therefore not amenable to batch processing can be safely utilized (forbidden chemistry). Because of the small reactor volumes, risks in case of a failure are minimized. Such hazardous reagents often are low molecular weight compounds, leading generally to the most atom-, time-, and cost-efficient route toward the desired product. Ideally, they are generated from benign, readily available and cheap precursors within the closed environment of the flow reactor on-site on-demand. By doing so, the transport, storage, and handling of those compounds, which impose a certain safety risk especially on a large scale, are circumvented. This strategy also positively impacts the global supply chain dependency, which can be a severe issue, particularly in times of stricter safety regulations or an epidemic. The concept of the in situ production of a hazardous material is generally referred to as the “generator” of the material. Importantly, in an integrated flow process, multiple modules can be assembled consecutively, allowing not only an in-line purification/separation and quenching of the reagent, but also its downstream conversion to a nonhazardous product. For the past decade, research in our group has focused on the continuous generation of hazardous reagents using a range of reactor designs and experimental techniques, particularly toward the synthesis of APIs. In this Account, we therefore introduce chemical generator concepts that have been developed in our laboratories for the production of toxic, explosive, and short-lived reagents. We have defined three different classes of generators depending on the reactivity/stability of the reagents, featuring reagents such as Br(2), HCN, peracids, diazomethane (CH(2)N(2)), or hydrazoic acid (HN(3)). The various reactor designs, including in-line membrane separation techniques and real-time process analytical technologies for the generation, purification, and monitoring of those hazardous reagents, and also their downstream transformations are presented. This Account should serve as food for thought to extend the scope of chemical generators for accomplishing more efficient and more economic processes.

The most direct, atom-economic, and sustainable synthetic routes frequently require the use of highly reactive, often toxic and short-lived reagents. Despite their advantages, many of such hazardous reagents are banned from laboratories in both industry and academia in a conventional chemical environment, and alternative routes employing easier to handle materials are chosen instead. However, this strategy is unattractive with respect to scale-up because it generally proves to be more laborious, generates more waste material, and is thus neither cost nor environmentally effective.

The concern toward the utilization of hazardous materials is not only related to their handling by the operator but also to their transportation and on-site storage, in particular on a large scale. Indeed, many potentially powerful reagents are imposed with stringent transport, storage, and preventive maintenance restrictions or are even not amenable to be transported or stored due to their instability and/or toxicity. The transportation of dangerous goods is strictly controlled and governed through national and international regulations. 1 Each mode of transport has its own set of regulations, which vary considerably from one country to another and are revised continuously. 1 In addition, the high dependency on the global supply chain, changing market situation, and quality of the shipped material has a significant impact on the end-user. This vulnerability becomes even more severe nowadays because authorities in low-cost countries increasingly tighten environmental and safety controls on raw material manufacturers. 2 The prospect of keeping the supply chain short is therefore of major interest to the chemical industry. By eliminating bottlenecks in the supply chain, the agility of production is increased, and a rapid response to a changing market is facilitated.

To overcome the transport, storage, and handling predicament of hazardous reagents, they are best produced in situ from benign precursors, on-site and on-demand whenever they are needed and in volumes that match the demand. 3 The risk is further reduced through real-time use of the dangerous chemical by an immediate transformation into a nonhazardous product directly upon its generation. The safest way to do so is their synthesis by continuous flow processes in small-structured reactors (e.g. microreactors). 4 This concept of continuous in situ production of hazardous materials is commonly referred to as the "generator" of this material. 5 The defining characteristic of these flow reactors is their comparatively small reactor volume which minimizes the severity in case of an accident because less material and energy is released. In addition, head space issues are eliminated, and an extraordinary heat and mass transport is achieved. As a result, hazardous reagents and process conditions can be safely employed which otherwise would be difficult, if not impossible, to implement in a traditional batch setup. Continuous processing therefore opens up the toolbox of "forbidden chemistries" to be safely carried out. 4 For the past 10 years, a significant portion of our group's research has been directed toward the generation of hazardous and/or unstable reagents in continuous flow environments, many times in extreme temperature and pressure regimes. As safety is one of the main drivers to implement continuous processes, in particular in the pharmaceutical industry, hazardous but more atom-and cost-economic routes are increasingly incorporated into the synthesis. Therefore, continuously broadening the chemical generator scope is of paramount importance. In this Account, numerous contributions to this field are highlighted with an emphasis on chemical generator concepts that were developed within the past decade in our group for continuous on-site on-demand production of toxic, explosive, and short-lived reagents. For further hazardous chemistries performed in continuous flow environments, several other review articles are recommended. 4

REAGENTS Classical chemical generators for the continuous production of simple, reactive molecules such as F 2 , O 2 , O 3 , or H 2 have been in use for decades. Most of them operate via electrolysis and are commercially available. However, with the growing interest in continuous flow operations by the pharmaceutical industry for active pharmaceutical ingredient (API) manufacturing and the accompanied demand to access new process windows, 6 custom-built generators for explosive, toxic, and short-lived reagents are constantly being developed. Both the now common access to flow equipment and technological advances in this field led to the emergence of a new generation of chemical generators. Figure 1 depicts the general concept for such generators for the on-site on-demand production of hazardous reagents. They are generated from nontoxic, readily accessible and ideally low-cost precursors and, if necessary, purified in-line to produce a continuous stream of the reagent, which is then further consumed by an appropriate substrate in a downstream reaction in a fully contained fashion. Before product collection, an in-line quench to destroy any remaining hazardous material can be incorporated.

Additionally, by integrating process analytical technologies (PAT), real-time data can be acquired for process monitoring and process control for ensuring product quality. 7 Rapid in-line reaction analysis is of particular importance when working with highly hazardous material, transient intermediates, or high temperature/pressure systems, because standard off-line sampling techniques are highly undesirable. In-line PAT tools such as NMR, UV/vis, or IR are particularly easy to implement into continuous flow reactors. 8 Furthermore, process control systems can be employed to automate the process. 9 A reagent produced in a chemical generator often needs inline purification to remove undesired byproducts and to transfer it into a solvent suitable for subsequent downstream transformations. One of the most powerful purification methods relies on the use of membranes for the separation of a desired reagent or intermediate. 10 Two membrane-based separation techniques have been used to conquer the field of continuous flow synthesis: liquid−liquid and gas−liquid separators. The liquid−liquid separation technique depends on the exploitation of surface forces and the difference in wetting properties of the liquids onto a porous membrane. 11 This concept is typically applied when the reagent is generated within an aqueous environment. After extraction into a suitable organic solvent, membrane separation takes place: the organic Accounts of Chemical Research pubs.acs.org/accounts Article or "wetting" phase passes through the hydrophobic membrane, while the aqueous phase is retained. On the other hand, the gas−liquid separation takes advantage of the selective permeability of the membrane for hydrophobic low molecular weight compounds in gaseous form. The most commonly employed semipermeable membrane for the separation and purification of hazardous reagents is the gas-permeable Teflon AF-2400 membrane, which is housed inside the so-called tubein-tube reactor. 12 In this device, the gaseous reagent is generated inside the inner AF-2400 tubing and then diffuses through this membrane and instantly reacts with the substrate that is carried within the outer gas impermeable tubing. Pursuant to our definition, a modern chemical generator should guarantee the most atom-and cost-effective route toward the desired end-product. Therefore, the hazardous material has to be a simple, low molecular weight and versatile compound and be produced from inexpensive, benign precursors. Where necessary, the reagent can be purified/ separated in-line prior to the downstream transformation. We categorize these generators according to reagent stability into three classes: generators for (1) stable reagents, (2) reagents with limited stability, and (3) unstable reagents ( Figure 2 ). All three classes are discussed in this Account ( Figure 3 ).

These reagents are commercially available in their pure form and can be shipped and stored, although stringent restrictions are imposed. To overcome these sometimes exceptional measures, it is highly desirable to generate those reagents in situ and on-demand for both manufacturing and laboratory use.

Cyanogen bromide (BrCN) is a solid that sublimes at room temperature and is acutely toxic. Pure BrCN is stable for longer periods if stored under dry conditions at 2−8°C, but impurities catalyze its exothermic and explosive trimerization to cyanuric bromide. Furthermore, it is decomposed gradually by water/moisture and rapidly by acids to highly toxic HCN and corrosive HBr. BrCN is a versatile reagent in organic synthesis as an electrophilic cyanide source to generate a variety of products. 13 We developed a BrCN generator that produces this material from aqueous Br 2 and KCN solutions (Scheme 1). 14 A solution of pure BrCN in dichloromethane (DCM) was obtained after an in-line extraction using a glass microreactor chip and purification with a liquid−liquid membrane separator unit. Furthermore, the generated BrCN was monitored and quantified via in-line FTIR analysis. The such generated 0.7 M BrCN solution was further employed in the downstream reaction with diamines or aminoalcohols to obtain fiveand six-membered cyclic guanidines and amidines (Scheme 1). Because this generator model employs elemental bromine (Br 2 ), which is also an exceedingly undesirable reagent to handle and more particularly to transport (it is commonly carried in lead-lined steel tanks supported by strong metal frames), we also designed a continuous Br 2 generator employing the well-established bromate−bromide synproportionation under acidic conditions. 14 An aqueous feed of NaBrO 3 and NaBr was mixed with aqueous HBr at equal flow rates to generate a 1 M Br 2 solution. This module can either be used for performing brominations or can be coupled upstream to the BrCN generator as a Br 2 feed (Scheme 1). Notably, by employing the in-series concept, a higher BrCN concentration (0.8 M) was achieved due to the increased solubility of Br 2 in water. We then further advanced the bromine generator concept for highly intensified photochemical benzylic bromination reactions employing a plate-based photochemical reactor. 15 By mixing the neat organic stream with HBr prior entering the reactor, interphase mixing was improved. That not only allowed Br 2 to be generated within the mixing structures in a more effective (3.8 M) and uniform way but also allowed omission of NaBr that was previously necessary to improve the water solubility of Br 2 . In addition, because of the enhanced mass transfer within the reactor's internal mixing structure, generated HBr is recycled via backmixing into the aqueous phase, thus resulting in a reduced HBr loading. With the setup depicted in Scheme 2, neat 2,6-dichlorotoluene was converted to the benzyl bromide derivative, an important API building block for inhalation medicines, within a residence time of only 18 s and a productivity of 300 g/h. Excess Br 2 was quenched in-line with sodium thiosulfate (Na 2 S 2 O 3 ). Similar Br 2 generators using either NaOCl 16 or H 2 O 2 17 as oxidant have also been reported. Accounts of Chemical Research pubs.acs.org/accounts Article Along similar lines, elemental chlorine (Cl 2 ) can be generated. Chlorine is the most atom economic reagent to generate chlorinated compounds and, furthermore, is a cheap and powerful oxidation agent. However, Cl 2 gas is highly toxic and corrosive, and strict regulations must be followed, i.e. production facilities normally need to be isolated and staff specially equipped and trained. In 2016, we demonstrated that Cl 2 was generated almost instantaneously and in ca. 90% yield at room temperature by mixing aqueous solutions of sodium hypochlorite (NaOCl, bleach) and HCl (Scheme 3). 18 It was then extracted from the water phase into an organic phase, and the two phases were separated in a liquid−liquid membrane separator. The byproduct of the reaction (aq NaCl) is removed with the aqueous waste stream, while the Cl 2 in the organic phase can be directly utilized for subsequent chlorination and oxidation reactions. The selective oxidation of secondary alcohols employing the in situ formed chlorine−pyridine complex (Cl 2 :Py) is illustrated in Scheme 3.

Nitrosyl chloride (NOCl) is a toxic gas and has a corrosiveness comparable to aqua regia. It can be stored only in nickel-based alloys such as Monel, and its commercial availability is thus limited. NOCl behaves as an electrophile and is i.e. used for the synthesis of oximes from alkenes, ketones, or alkanes. We reported the generation of NOCl from aqueous sodium nitrite (NaNO 2 ) and HCl as inexpensive and readily available precursors in 2019 (Scheme 4). 19 After an essentially spontaneous formation of NOCl, it was rapidly extracted into DCM and separated from the aqueous phase in a liquid−liquid membrane separator. Before consumption by a substrate, the NOCl concentration was monitored in-line with a custom-built UV/vis flow cell made of NOCl-compatible material. A plate-based photochemical reactor was finally integrated to perform the downstream chemistry, the photochemical transformation of cyclohexane to cyclohexanone oxime, which is an important industrial building block toward ε-caprolactam (Scheme 4).

Hydrogen cyanide (HCN) is a highly valuable and atomeconomic reagent for organic synthesis (e.g., synthesis of cyanohydrin precursors or (hydro)cyanations), but also a highly poisonous and volatile liquid that turns into a gas at 26°C

. In pure form, HCN is stable but it polymerizes exothermally in the presence of basic materials. Nowadays, the Andrussow and Degussa processes account for almost the entire large-scale production of pure HCN (e.g., 450 t/a are shipped in gas cylinders by DuPont). 3 Its use on laboratory scale, on the other hand, is considered too dangerous and is thus significantly underutilized in organic synthesis. The first HCN generator was reported by Stevens and Acke in 2007. 20 HCN was produced within the same tubing as the HCN consuming reaction took place, which can cause compatibility issues. To generate anhydrous HCN, crucial for a variety of transformations, we developed a safe protocol for the generation and separation of HCN within the tube-in-tube reactor. 21 By mixing aqueous feeds of NaCN and H 2 SO 4 , HCN is formed, diffuses at 50°C in its gaseous form through the membrane into a carrier solvent, and finally exits the reactor into a flask containing the substrate (Scheme 5). This semibatch "HCN on tap" configuration was preferred for most transformations, because the exceedingly long reaction times of up to 24 h are usually not tolerable for a fully continuous flow approach (Scheme 5). In addition, subzero temperatures in an aqueous reaction medium, as in the asymmetric Strecker reaction (Scheme 5a), are not feasible inside the tube-in-tube.

A separation technique that is not relying on a membrane was developed by Kim and coworkers for the generation of chloromethyl methyl ether (CMME), which is highly carcinogenic and genotoxic, is used as an alkylating agent and is renowned for the introduction of the methoxymethyl In 2016, they introduced the socalled μ-TES (micrototal envelop system) format for the safe generation, separation/purification, consumption, and quenching of CMME (Scheme 6). 22 Key to this strategy was the use of a membrane-free superamphiphobic SiNW (silicon nanowire) microseparator where separation occurs at the interface of the stable gas−liquid laminar flow. CMME was generated from hexanoyl chloride and dimethoxymethane by heating in a coil reactor. The exiting stream was fed into the SiNW separator, where CMME gas was separated from the liquid reaction mixture, subsequently combined with the reagent stream for MOM protection, and finally quenched in line with an ammonium chloride solution (Scheme 6). The products were separated by an ultimate liquid−liquid membrane extraction step. Sulfur dioxide (SO 2 ) can be shipped and stored as a compressed liquefied gas but necessitates purpose-built facilities and dedicated equipment. Moreover, in the EPA Risk Management Planning program, SO 2 is ranked among the top ten chemicals involved in industrial accidents. 3 Its sparse application on lab-scale is due to its corrosiveness, its considerable toxicity at high concentrations, and the resulting demanding safety measures. Nonetheless, SO 2 is an atomefficient and inexpensive reagent and is used in a variety of organic transformations such as the synthesis of H 2 SO 4 , sulfonyl chlorides or sulfonamides. In 2020, Ramalingam, Chen, and coworkers developed a semibatch protocol for the on-demand generation of SO 2 from readily available sodium sulfite (Na 2 SO 3 ) and H 2 SO 4 (Scheme 7). 23 SO 2 gas was produced instantaneously within the T-mixer inside a closed vessel up to a productivity of 1.5 mmol/min. SO 2 was further Another reagent that falls into this category is phosgene (COCl 2 ). Phosgene is a highly toxic gas that can be shipped and stored when converted into a liquid by cooling and pressurization. Its production and storage require extraordinary measures and it is under various transportation restrictions. Consequently, most phosgene is consumed on-site. Phosgene is an important industrial chemical, with several million tons produced globally each year, 24 and is predominantly used for the synthesis of isocyanates. However, on lab-scale, it finds limited use because of the accompanied hazards. A safe continuous process was reported by Jensen and coworkers in 2001 where phosgene was generated from Cl 2 and carbon monoxide (CO) under activated carbon catalysis in a siliconbased packed-bed reactor with a productivity of 1−11 g/h. 25 By utilizing a simpler reactor setup, the Takahashi group developed a route that uses less-toxic triphosgene as phosgene precursor, which decomposes to phosgene inside the microreactor upon mixing with an amine base. 26

This type of reagents is too unstable to be transported or stored in their pure form. Therefore, to minimize the hazard of exothermic decomposition and in further consequence violent explosion, they often are delivered in diluted form. The shipping is restricted, and based on the concentration, various safety measures apply.

Peracids are strong oxidizing reagents used for epoxidations, hydroxylations, and the Baeyer−Villiger oxidation. They are also very unstable and, depending on the concentration, prone to explosive decompositions. Performic acid (HCO 3 H) in concentrations >50% is highly reactive: it readily decomposes upon heating and explodes when rapidly heated to 80−85°C; at room temperature, it may ignite or explode when combined with flammable substances. In view of our group's interest in the synthesis of opioid-derived APIs, 27 a telescoped continuous process toward a noroxymorphone precursor (4) was established that comprised the C14 hydroxylation of naturally occurring oripavine (2) employing HCO 3 H as the key step. 28 Performic acid was generated in situ from formic acid (HCO 2 H) and 30% aqueous hydrogen peroxide (H 2 O 2 ) which then rapidly oxidized the diene moiety of oripavine at 100°C to provide 14-hydroxymorphinone (3) and the corresponding N-oxide (Scheme 8). A subsequent continuous solvent switch, hydrogenation in a packed-bed hydrogenator, and palladium catalyzed N-methyl oxidation furnished 1,3oxazolidine derivative 4.

Similar continuous flow approaches for generating peracids in situ were also reported by Kolehmainen and coworkers 29 and Siegfried Ltd. 30 Lithium diisopropylamide (LDA) is pyrophoric as a solid, but its solutions are generally not; therefore, it is commercially typically available as a solution in THF/hexanes. However, because LDA solutions are known to be unstable upon prolonged storage, it is generally prepared in situ from diisopropylamine and n-butyl lithium (n-BuLi). To control the exotherm produced during the LDA generation and enable its safe production on larger scale, several research groups have developed continuous flow strategies. 31 We described a 32 The process is then integrated with an electrophilic addition step and an in-line water quench to furnish the α-functionalized esters 6. Because of the enhanced mass transfer, higher temperatures compared to batch (0 vs −78°C) can be applied for both LDA and enolate generation.

These reagents are generally banned from transport and storage because they are too dangerous and/or too short-lived. They are therefore not commercially available in any form. The hazardous nature of these compounds has severely limited their use in laboratories, particularly in industry, in the past. Diazo compounds belong to the most versatile reagents in the organic chemistry portfolio. 33 They are used, i.e., for X−H insertions, ylide formation, cyclopropanations, and cycloadditions. Whereas diazoalkanes are too hazardous and unstable to be purchased (vide infra), α-diazocarbonyls are comparatively more stable and thus a few can be acquired in dilute (10−15%) solutions. One example is ethyl diazoacetate (EDA), which is routinely handled on a laboratory scale, while its presence in a chemical plant causes problems when applied in batch mode. Among the many reported continuous flow processes to generate EDA, 34 the most atom-economic route is the diazotation of glycine ethyl ester hydrochloride with NaNO 2 . 5, 35 The such generated EDA was purified by an integrated liquid−liquid membrane separation unit and was immediately used for further follow-up chemistries. 5, 35 Diazomethane (CH 2 N 2 ) is the simplest but also the most hazardous diazo compound: it is an extremely toxic gas, a potent carcinogen, and because of its extreme sensitivity to explosive decomposition, it is challenging to handle and store. On the other hand, it is a versatile and the most atomeconomic C 1 building block that provides typically fast and clean reactions, often producing only nitrogen as a byproduct. Traditional CH 2 N 2 production by distillation is discouraged by industry on both lab and production scale due to the enormous safety risks involved. Therefore, different methods to generate CH 2 N 2 by base-mediated decomposition of N-nitroso-Nmethyl amine precursors in continuous flow systems have emerged over the last few years by using either standard (micro)reactors or membrane technology. 36 The safest and thus most prominently employed precursor is N-methyl-Nnitroso-p-toluenesulfonamide (Diazald) but also N-nitroso-Nmethyl urea (NMU), a toxic and explosive compound itself, can be used when generated upstream in situ from benign and cheap N-methyl urea. 37, 38 As of 2013, we commenced extensive studies on the development of anhydrous CH 2 N 2 generators by membrane separation techniques. Initially, we employed the tube-in-tube reactor to separate gaseous CH 2 N 2 from the aqueous reaction stream carried within the inner membrane tubing. 39 Downstream transformations that took place inside the outer tubing included the methylation of carboxylic acids, cyclopropanations and the synthesis of diazoketones (Scheme 10). In a subsequent study, this CH 2 N 2 generator setup was integrated into the telescoped three-step synthesis of chiral αchloroketones that are key building blocks for many HIV protease inhibitors via a modified Arndt−Eistert reaction starting from N-protected amino acids (see also Scheme 11) . 40 Along similar lines, we reported a fully continuous process for the preparation of β-amino acids from their corresponding αamino acids utilizing the Arndt−Eistert homologation with a photochemical Wolff rearrangement as a key step. 41 Although the tube-in-tube reactor operates fully continuously, its limitation is a very low productivity (up to 1.7 mmol CH 2 N 2 /h), especially when slow reactions are considered, because the flow rate of the outer tubing determines the reaction time. We therefore have developed a device with the focus not only on a higher throughput but also on operational simplicity and flexibility, the so-called tube-in-flask reactor. 42 In this setup, the same AF-2400 membrane that is contained in the tube-in-tube reactor is coiled inside a glass flask (Figure 4) , where the diffused CH 2 N 2 is immediately consumed by the substrate solution. By dissolving Diazald in DMF, higher concentrations could be achieved than in the tube-in-tube setup, which led also to higher CH 2 N 2 concentrations and, ultimately, to a higher product output. By introducing four membranes in parallel, ca. 43 mmol CH 2 N 2 /h could thus be generated. 42 In continuation of our interest in designing generators for larger scales, we established the tube-in-CSTR concept in 2019, which is a fully continuous version of the tube-in-flask reactor. 43 By applying the continuous stirred tank reactor (CSTR) cascade depicted in Scheme 11, the three-step synthesis of chiral α-chloroketone 7, as described above, was selected as proof-of-concept study. Compared to the tube-intube reactor approach, the productivity of 7 could be increased by a factor of 4.2. For both the tube-in-flask and tube-in-CSTR reactor, in-line FTIR as PAT tool was employed to monitor the reaction process.

In all the above-mentioned CH 2 N 2 generators, Diazald was employed as convenient precursor; however, for a more atomeconomic and sustainable route, NMU would be the better choice. By using the semibatch tube-in-flask setup, we also have reported the production of CH 2 N 2 from NMU as precursor, which in turn was generated in situ by nitrosation of N-methylurea in a continuous upstream process. 37 The threestep synthesis of α-chloroketone 7 was carried out in one-pot via a similar procedure to that described in Scheme 11.

The same tube-in-tube setup as described for CH 2 N 2 was also employed by our group for the generation of trifluoromethyl diazomethane (CF 3 CHN 2 ), 44 which represents a versatile CF 3 source that has been neglected for a long time. Similar to CH 2 N 2 , it is a gaseous reagent, which is also

Accounts of Chemical Research pubs.acs.org/accounts Article attributed to being explosive and potentially toxic and thus poses a severe safety risk in batch processes. CF 3 CHN 2 was generated in 33% yield by diazotation of the corresponding amine hydrochloride with NaNO 2 under aqueous acidic conditions inside the membrane tubing (Scheme 12). The diazo compound was then further reacted downstream with aldehydes that were fed into the outer tubing in a DBUcatalyzed aldol-type condensation. For an efficient condensation, a packed-bed reactor with polymer-bound DBU needed to be implemented. Halogen azides XN 3 (X = F, Cl, Br, I) and hydrazoic acid (HN 3 ) are the simplest possible azide compounds. Because of the extreme toxicity and explosive nature of these high-energy materials, their application on lab and even more so on industrial scale is essentially precluded. Bromine azide (BrN 3 ) is exceptionally sensitive to small variations in temperature and pressure and spontaneously explodes under various conditions to generate toxic and corrosive gases. In 2016, we reported the safe generation of BrN 3 starting from low-cost NaBr and NaN 3 using Oxone as the oxidizing agent and its immediate consumption by an olefin in a radical 1,2-bromoazidation reaction (Scheme 13). 45 The segmented flow regime obtained within the tubing and the concomitant rapid extraction of BrN 3 from the aqueous into the organic phase was crucial for the process because substantial decomposition of BrN 3 in the Scheme 11. Anhydrous Diazomethane Generator (Tube-in-CSTR) in a CSTR Cascade for the Synthesis of α-Chloroketone 7 After an off-line quench with Na 2 S 2 O 3 , the products were isolated by a simple extractive workup and further reacted to aziridines, azirines, and indoles. The continuous in situ generation and consumption of ClN 3 and IN 3 , respectively, was described by the groups of Vogtle and Wirth. 46 The first generator concept that was reported by our group in 2010 featured the in situ generation of highly explosive HN 3 from inexpensive NaN 3 as azide source and acetic acid. 47 HN 3 was instantly formed upon mixing of the two feeds and then reacted further with organic nitriles (comprised within the acidic feed) in a catalyst-free high-temperature/high-pressure cycloaddition step to furnish 1H-tetrazoles (Scheme 14). As HN 3 is not compatible with metals, a passivated silica-coated stainless-steel coil (Sulfinert) was employed as the hightemperature reactor. A throughput of up to 19 g/h was achieved with this atom-economic and cost-effective route toward the tetrazole core, which makes this approach also suitable for industrial scale synthesis.

The faster the reaction conditions can be changed and the tighter the integration of synthesis, separation, and consumption can be achieved, the more elusive reagents can be prepared. In current state-of-the-art flow reactors, all the above-mentioned steps can be accomplished within seconds or even (sub)-milliseconds. 48 Particularly useful for such ultrafast chemistries (flash chemistry) are customized flow reactors and mixing units that can be manufactured from various materials by 3D-printing. 49 Such reactors are designed to fit the need for the specific chemistry at hand. Hence, highly transient intermediates with half-lives in the range of milliseconds, such as carbenes or radicals, that only are accessible via their synthesis in situ, can be conveniently generated. 48 In this context, our group has recently reported the generation of transient intermediates such as difluorocarbene (:CF 2 ), 50 the trifluoromethyl radical (·CF 3 ), 51 or bromomethyl lithium. 52 The detailed discussion of these highly reactive species is outside the scope of this Account on chemical generators, and the reader is referred to pertinent literature. 48

Continuous flow devices are uniquely suited for carrying out hazardous reactions as they combine low reactor volumes and exceptional heat and mass transport. Furthermore, flow reactor setups can be designed as modular systems that integrate multiple reaction steps, in-line purification procedures, and real-time reaction control employing PAT tools. In this Account, we highlighted various generator concepts for the safe on-site on-demand production of reagents that are too reactive, explosive, toxic, or short-lived to be transported or stored. Importantly, the implementation of such low molecular weight reagents enables the design of the most direct and atom-efficient routes.

Because we are living in challenging times, be it the outbreak of the COVID-19 pandemic or environmental disasters, a rethinking of society needs to be induced with respect to globalization. Any of such events can dramatically disrupt the international supply chains, as we are facing shortages of important APIs at this very moment. To become more independent from foreign third-party services, the localized manufacturing of essential chemical products will become more vital. As a consequence, on-site storage of hazardous chemicals will increase, imposing not only an increased safety risk but also potentially higher costs. Therefore, generating reagents on-site and on-demand in continuous flow from inexpensive and readily available starting materials will be a reasonable solution for a chemical society that is increasingly committed to efficiency, sustainability, and safety. 

Prominent regulatory frameworks include the United Nations Recommendations on the Transport of Dangerous Goods; Transport by air: International Air Transport Association Dangerous Goods Regulations (IATA-DGR); Transport by rail: International Carriage of Dangerous Goods by Rail (RID); Transport by road: European Agreement concerning the International Carriage of Dangerous Goods (ADR)

European Agreement Concerning the International Carriage of Dangerous Goods by Inland Waterways (ADN)

Inherent Safety at Chemical Sites: Reducing Vulnerability to Accidents and Terrorism Through Green Chemistry

Forbidden Chemistries Go Flow in API Synthesis

Recent Advances for Serial Processes of Hazardous Chemicals in Fully Integrated Microfluidic Systems

Safety Assessment in Development and Operation of Modular Continuous-Flow Processes

) (a) May, S. A. Flow Chemistry, Continuous Processing, and Continuous Manufacturing: A Pharmaceutical Perspective

The Synthesis of Active Pharmaceutical Ingredients (APIs) Using Continuous Flow Chemistry

Laboratory of the Future: A Modular Flow Platform with Multiple Integrated PAT Tools for Multistep Reactions

Seven Chemical Separations to Change the World

Membrane-Based, Liquid−Liquid Separator with Integrated Pressure Control

Flow Chemistry: Intelligent Processing of Gas−Liquid Transformations Using a Tube-in-Tube Reactor

Cyanogen Bromide (CNBr)

Integration of Bromine and Cyanogen Bromide Generators for the Continuous-Flow Synthesis of Cyclic Guanidines

Continuous Photochemical Benzylic Bromination Using in Situ Generated Br 2 : Process Intensification towards Optimal PMI and Throughput

Electrophilic Bromination in Flow: A Safe and Sustainable Alternative to the Use of Molecular Bromine in Batch

Catalyst and Solvent-Free Bromination of Toluene Derivatives by HBr-H 2 O 2 with Visible-Light Photocatalysis Using a Continuous-Flow Micro Reactor

A Laboratory-Scale Continuous Flow Chlorine Generator for Organic Synthesis

Continuous Generation, In-Line Quantification and Utilization of Nitrosyl Chloride in Photonitrosation Reactions

A HCN-Based Reaction under Microreactor Conditions: Industrially Feasible and Continuous Synthesis of 3,4-Diamino-1H-Isochromen-1-Ones

On-Demand Continuous Production of Anhydrous HCN for Organic Synthesis

Micro-Total Envelope System with Silicon Nanowire Separator for Safe Carcinogenic Chemistry

Efficient and Practical Synthesis of Sulfonamides Utilizing SO 2 Gas Generated On Demand

Global Phosgene Outlook

Microfabricated Packed-Bed Reactor for Phosgene Synthesis

Design and Development of Pd-Catalyzed Aerobic N-Demethylation Strategies for the Synthesis of Noroxymorphone in Continuous Flow Mode

An Integrated Continuous-Flow Synthesis of a Key Oxazolidine Intermediate to Noroxymorphone from Naturally Occurring Opioids

Determination of Kinetics of Percarboxylic Acids Synthesis in a Microreactor by Mathematical Modeling

Barbier Continuous Flow Preparation and Reactions of Carbamoyllithiums for Nucleophilic Amidation

Modern Catalytic Methods for Organic Synthesis with Diazo Compounds: From Cyclopropanes to Ylides

Continuous Flow Synthesis of Toxic Ethyl Diazoacetate for Utilization in an Integrated Microfluidic System

One-Pot Synthesis of α-Haloketones Employing a Membrane-Based Semibatch Diazomethane Generator

A Scalable and Safe Continuous Flow Procedure for In-Line Generation of Diazomethane and Its Precursor MNU

Continuous Flow Generation and Reactions of Anhydrous Diazomethane Using a Teflon AF-2400 Tube-in-Tube Reactor

Continuous Flow Synthesis of α-Halo Ketones: Essential Building Blocks of Antiretroviral Agents

Continuous Flow Synthesis of β-Amino Acids from α-Amino Acids via Arndt-Eistert Homologation

Lab-Scale Production of Anhydrous Diazomethane Using Membrane Separation Technology

Design and Optimization of a Continuous Stirred Tank Reactor Cascade for Membrane-Based Diazomethane Production: Synthesis of α-Chloroketones

Generation and Synthetic Application of Trifluoromethyl Diazomethane Utilizing Continuous Flow Technologies

Safe Generation and Direct Use of Chlorine Azide in Flow Chemistry: 1,2-Azidochlorination of Olefins and Access to Triazoles

Controlling Hazardous Chemicals in Microreactors: Synthesis with Iodine Azide

Flash Chemistry: Fast Chemical Synthesis by Using Microreactors

Design and 3D Printing of a Stainless Steel Reactor for Continuous Difluoromethylations Using Fluoroform

Scalable Continuous Flow Process for the Synthesis of Eflornithine Using Fluoroform as Difluoromethyl Source

Continuous Flow Homolytic Aromatic Substitution with Electrophilic Radicals: A Fast and Scalable Protocol for Trifluoromethylation

Continuous Flow Synthesis of Terminal Epoxides from Ketones using In Situ Generated Bromomethyl Lithium