key: cord-0761544-ii2kqgc3
authors: Gauthier, Nick P. G.; Nelson, Cassidy; Bonsall, Michael B.; Locher, Kerstin; Charles, Marthe; MacDonald, Clayton; Krajden, Mel; Chorlton, Samuel D.; Manges, Amee R.
title: Nanopore metagenomic sequencing for detection and characterization of SARS-CoV-2 in clinical samples
date: 2021-11-18
journal: PLoS One
DOI: 10.1371/journal.pone.0259712
sha: 3f7d2d3ede13356af983ea6d5bcd4f74d12b85c0
doc_id: 761544
cord_uid: ii2kqgc3

OBJECTIVES: The COVID-19 pandemic has underscored the need for rapid novel diagnostic strategies. Metagenomic Next-Generation Sequencing (mNGS) may allow for the detection of pathogens that can be missed in targeted assays. The goal of this study was to assess the performance of nanopore-based Sequence-Independent Single Primer Amplification (SISPA) for the detection and characterization of SARS-CoV-2. METHODS: We performed mNGS on clinical samples and designed a diagnostic classifier that corrects for barcode crosstalk between specimens. Phylogenetic analysis was performed on genome assemblies. RESULTS: Our assay yielded 100% specificity overall and 95.2% sensitivity for specimens with a RT-PCR cycle threshold value less than 30. We assembled 10 complete, and one near-complete genomes from 20 specimens that were classified as positive by mNGS. Phylogenetic analysis revealed that 10/11 specimens from British Columbia had a closest relative to another British Columbian specimen. We found 100% concordance between phylogenetic lineage assignment and Variant of Concern (VOC) PCR results. Our assay was able to distinguish between the Alpha and Gamma variants, which was not possible with the current standard VOC PCR being used in British Columbia. CONCLUSIONS: This study supports future work examining the broader feasibility of nanopore mNGS as a diagnostic strategy for the detection and characterization of viral pathogens.

a1111111111 a1111111111 a1111111111 a1111111111 a1111111111

The global COVID-19 pandemic and ensuing public health emergency has underscored the need for rapid, comprehensive, and cost-effective viral testing strategies to respond effectively to outbreaks and implement public health policy. COVID-19 disease is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2); a positive-sense RNA virus from the family Coronaviridae [1, 2] . The current standard for the diagnosis of many viral infections, including SARS-CoV-2, is based on real-time qualitative reverse transcription polymerase chain reaction (RT-PCR) assays [3] . Due to its low cost, reliability, and ability to diagnose infection known pathogens, RT-PCR has been at the forefront of viral diagnostics before and during the COVID-19 pandemic [4] . However, this method still requires many hours of hands-on time by skilled laboratory technicians and is limited in that it only detects a predetermined number of pathogens that its primers are designed to identify; unknown or unexpected infectious agents will be missed [5] . This is a strong rationale for exploring alternative diagnostic strategies that can detect known and novel pathogens.

Metagenomic next generation sequencing (mNGS) allows all genetic material recovered directly from a sample to be sequenced and analyzed in a culture-free manner. Sequence-independent single primer amplification (SISPA) [6] is one such mNGS approach. SISPA enables non-selective reverse transcription of all extracted RNA in a sample into cDNA and amplifies the reverse transcribed cDNA using random nonamers tagged to a known primer sequence. This method has been successfully used to detect and assemble genomes of avian RNA viruses [7] , canine distemper virus [8] , human enterovirus [9] , chikungunya virus, Ebola virus, hepatitis C virus [10] , influenza virus [11] , as well as for detection of SARS-CoV-2 in a small number of samples [12, 13] . Therefore, there is a strong justification for using this approach to enable detection of pathogenic agents in diagnostic laboratories.

SISPA and mNGS have several clear advantages over targeted molecular approaches. mNGS enables detection of multiple pathogens and co-infection in a clinical sample, as well as potentially providing information on partial or full genome sequence, genotype, antimicrobial resistance, virulence, and microbiota-associated dysbiosis at a particular body site [14, 15] . Despite the potential advantages of this approach for clinical applications, mNGS techniques have not yet been widely adopted due to their high-cost, time-intensive sample preparation, limited access to sequencing infrastructure and lack of robust, easy-to-use and interpret bioinformatics systems [14] . Furthermore, the FDA has provided no specific requirements for validation of mNGS-based diagnostic assays; which has made validation and translation of mNGS tools for detection of microorganisms challenging for routine clinical microbiology laboratories [15] .

The Oxford Nanopore Technologies' (ONT) MinION sequencing platform provides a method for high-throughput, and cost-effective long-read sequencing in a device that fits in the palm of a hand. Sequencing on the MinION device is also less time-intensive than the Illumina sequencing platform [14, 16] . The portability and cost-effectiveness of MinION sequencing makes Nanopore mNGS uniquely tailored for clinical applications. Despite these advances in long-read clinical sequencing applications, the field of nanopore clinical metagenomics has been largely unexplored. To date, there are only a few studies that examine the use of nanopore-based metagenomics for clinical applications [10, 11, 17, 18] .

Bioinformatic analysis is also a considerable barrier to adoption of mNGS for clinical diagnostics. The majority of available tools require command line knowledge, significant computing infrastructure, and experience translating bioinformatic results into actionable results [15, 19] . As well, traditional short read analysis services, such as One Codex and IDseq, were not designed or evaluated with third-generation data [20, 21] . Several tools have been developed recently to facilitate analysis specifically of nanopore mNGS data, including BugSeq and EPI2ME [22, https://epi2me.nanoporetech.com]. BugSeq is a bioinformatics solution designed for clinical microbiology labs, enabling the end-to-end analysis of nanopore sequencing data with a graphical user interface and cloud-based data processing. Its analytical method has been shown to have superior sensitivity and specificity compared to EPI2ME [22] , and will be the primary analysis pipeline used in this study.

In this pilot study, we examine the feasibility and performance of a SISPA-based nanopore mNGS assay to detect and characterize SARS-CoV-2 from two distinct study populations using the MinION sequencing device. We aim to quantify the sensitivity and specificity of this assay for detection of SARS-CoV-2 from clinical samples. Additionally, we aim to assess the utility of this assay to generate high-quality SARS-CoV-2 genomes to be used for phylogenetic analyses and lineage determination.

Clinical specimens were collected from two different populations. First, oropharyngeal swabs were collected in 2 mL of a guanidinium-based inactivation agent (Prestige Diagnostics) as part of a study conducted to estimate SARS-CoV-2 infection prevalence in a UK community from April 20 to June 17, 2020. Swab samples from 2714 individuals from around the greater Oxford area were collected to compare PCR, serology, and nanopore sequencing for SARS-CoV-2 infected versus uninfected subjects. A set of eight SARS-CoV-2 PCR positives or indeterminate samples from this population were included in the current study. Second, nasopharyngeal swab specimens collected in 3 mL viral transport medium (Yocon Bio-technology Co. Ltd) were obtained from routine SARS-CoV-2 community testing at Vancouver General Hospital (VGH) or the BC Centre for Disease Control (BCCDC) (Vancouver, British Columbia, Canada) (n = 35). RT-PCR testing for COVID-19 was performed for all samples at either the BCCDC Public Health Laboratory or the medical microbiology laboratory at VGH using either the Roche MagNA Pure extraction system (Roche Diagnostics, Laval, Canada) in combination with detection of E-gene and RdRp gene targets, or the Panther Fusion SARS-CoV-2 assay (Hologic Inc., San Diego, CA) detecting two targets in ORF1ab. Primers for the SARS-CoV-2 RNA-dependent RNA polymerase (RdRp) were developed in-house by the BCCDC Public health laboratory and primers for the E gene were based on the World Health Organization RT-qPCR protocol [3] . The human RNaseP gene was used as an internal control as suggested by the World Health Organization (https://www.who.int/csr/resources/publications/ swineflu/CDCRealtimeRTPCR_SwineH1Assay-2009_20090430.pdf?ua=1). A table containing primers and probes used for these assays can be found in S1 Table. Additionally, PCR screening for potential variants of concern (VOCs) (Ex. Alpha, Beta, Gamma, Delta variants) was performed on 11 of the positive swabs obtained from VGH that were collected from May 24-26 2021. Primers and probes were designed to target the N501Y and E484K mutations (S2 Table) . Swabs were stored at either -80˚C for the oropharyngeal swabs or -20˚C for the nasopharyngeal swabs. Specimens were chosen to obtain test performance metrics for nanopore mNGS across a range of C t values (S1 Fig). 

Prior to extraction, samples were vortexed and 200 μL of each sample was centrifuged at 16,000g for 3 minutes to pellet host cells. 140 μL of supernatant was aspirated and viral RNA was extracted from the supernatant using the QIAmp Viral RNA kit (Qiagen) as previously described [11] , and eluted in 30 μL nuclease-free water. Samples were treated with TURBO DNase (Thermo Fisher Scientific) and incubated at 37˚C for 30 minutes, followed by concentration and clean-up with the RNA Clean & Concentrator-5 kit (Zymo Research); finally, eluting in 8 μL nuclease-free water.

SISPA amplification was performed as described previously [9] [10] [11] [12] [13] . Briefly, concentrated RNA was incubated with primer A (100 pmol/μL; 5'-GTTTCCCACTGGAGGATA(N 9 ) -3') and then reverse transcribed using SuperScript IV Reverse Transcriptase (Thermo Fisher Scientific). Second strand synthesis was performed using Sequenase Version 2.0 (Thermo Fisher Scientific), following which, RNase H was performed to digest any remaining RNA. Random amplification was performed on each using AccuTaq LA DNA polymerase (Thermo Fisher Scientific) and SISPA primer B (5'-GTTTCCCACTGGAGGATA-3'). This reaction underwent PCR using the following conditions: initial denaturation for 30 seconds at 98˚C, followed by 30 cycles of 94˚C for 15 seconds, 50˚C for 20 seconds, and 68˚C for 2 minutes. A final elongation step of 68˚C for 10 minutes was added, prior to a final hold at 4˚C. Amplified cDNA was purified using a 1:1 ratio of PCR Clean DX beads (Aline Biosciences) and eluted in 50 μL nuclease-free water. Amplified cDNA was quantified using a Qubit 4 Fluorometer (Thermo Fisher Scientific) and fragment lengths were assessed using the TapeStation 2200 automated electrophoresis platform (Agilent).

Library preparation was performed using ONT's ligation sequencing kit (SQK-LSK109 or SQK-LSK110). Multiplexing was performed using the native barcoding expansion 96 kit (EXP-NBD196). Library preparation was performed according to the manufacturer's instructions, with several key modifications. DNA repair and end-prep were performed with 1000 fmol of input cDNA and the incubation times were increased to 30 minutes at 20˚C, followed by 30 minutes at 65˚C. For the barcoding reaction 200 fmol of input cDNA was incubated with the native barcodes and Blunt/TA Ligase Master Mix (New England Biolabs) for 20 minutes at room temperature (15-25˚C), followed by 10 minutes at 65˚C to improve barcode ligation efficiency with smaller fragments. Up to four clinical samples (90 fmol/sample) were multiplexed on each minION flowcell, with the addition of a blank viral transport medium negative control sample to each pooled library. Samples were sequenced on FLO-MIN106 flowcells on MinION MK1b sequencing devices for 72 hours using MinKNOW (Version 4.2.8, Oxford Nanopore Technologies) with live basecalling disabled.

Raw fast5 files were basecalled using Guppy (Version 5.0.7, Oxford Nanopore Technologies) using the-device cuda:0 flag to enable GPU basecalling. Output fastq files were uploaded to BugSeq (version 1.1, database version: RefSeq on Jan 28, 2021) for metagenomic classification [22] , and results classification results were visualized in Recentrifuge [23] . A representative html file containing an example visualization output can be found in the S1 File. In brief, reads were demultiplexed with qcat using default run parameters (enforcing barcodes on both ends, which we have defined as stringent demultiplexing), followed by quality control with prinseqlite. Reads shorter than 100bp or those deemed low quality (DUST score less than 7) were discarded. Reads were then classified against all of the microbial genomes in RefSeq, as well as the human genome and a library of common contaminants [see 22 for details]. Reads classified as SARS-CoV-2 were extracted and used to build a consensus sequence with Medaka. Bases with less than 20X coverage were masked in accordance with public SARS-CoV-2 sequencing guidelines (https://www.aphl.org/programs/preparedness/Crisis-Management/Documents/ APHL-SARS-CoV-2-Sequencing.pdf). SARS-CoV-2 lineages were assessed using Pangolin (Version 3.1.5, github.com/cov-lineages/pangolin), and phylogenetic analysis was performed with UShER [24] (Database: GISAID, GenBank, COG-UK and CNCB [2021-07-11]). Phylogenetic trees were constructed using augur [25] , rooted at the SARS-CoV-2 reference sequence, and visualized in iTOL [26] . Antimicrobial resistance genes were detected by aligning reads against the Resfinder database [27] with minimap2, disabling secondary alignments. Analysis from BugSeq outputs and visualizations were performed in RStudio (R version 4.1.0) and Python, with all code available at https://gitlab.com/bugseq/sars-cov-2-nanopore-mngsperformance [28] .

This study obtained research ethics board approval from the University of British Columbia (H20-02152). Approval for collection of participant data was obtained by the Central University Research Ethics Committee at the University of Oxford (R69035). Specimens collected as part of routine testing at VGH and the BCCDC were de-identified and only contained a sample ID number, collection date, C t , and VOC screening result.

Amplified cDNA from a total of 43 patient swabs were sequenced on MinION sequencing devices. Of these samples, 38 were either positive or had indeterminate results based on SARS-CoV-2 RT-PCR and 5 samples had negative RT-PCR results. The 38 positive and indeterminate samples had a mean C t value of 27.6 and ranged from 14.7-38.7 (S1 Fig). Sample collection dates, sample type, total read counts, as well as dual barcode reads, percent human reads, and SARS-CoV-2 reads per million reads sequenced (RPM) are present in Table 1 . On average, negative controls exhibited a 29.7-fold decrease in dual barcode reads compared to the average number of dual barcode specimen reads (Mean dual barcode reads = 20,013, Q1: 158.5, Q3: 17556). SARS-CoV-2 was detected in similar abundance across our six positive control samples obtained from cultured SARS-CoV-2 viral particles (Mean RPM Dual Barcode: 103,521 ± 21,070).

We evaluated the test performance of our mNGS assay for detecting SARS-CoV-2. A sample was considered positive if one or more reads were assigned to SARS-CoV-2. Across all clinical samples, we detect SARS-CoV-2 with 78.4% (95%CI 62.8%-88.6%) sensitivity and 100% specificity (95%CI 56.6%-100%) ( Table 2) . Previous literature has demonstrated decreased sensitivity of mNGS assays above C t 30 for other viruses [11, 29] . To assess the dependence of the 

mNGS assay on C t value, we performed a subgroup analysis on samples above and below SARS-CoV-2 C t 30. For samples with SARS-CoV-2 C t < 30, sensitivity was 100% (95%CI 84.5%-100%), while for samples with SARS-CoV-2 C t greater than 30, sensitivity was 50% (95%CI 27.8%-72.0%).

We note that two of 11 negative control samples had a single read assigned to SARS-CoV-2. We investigated these reads (further denoted as read one and two) to identify reasons for false positivity. Both reads had the expected barcode on both ends of the read as identified by BLAST. The first read exhibited 100% identity over the 24 nucleotide barcode on both ends, and the second read had 100% and 83% identity over the 24 nucleotide barcode on both ends. We next search these reads against the NCBI nucleotide database using megaBLAST to assess whether a BugSeq classification error occurred. However, both reads had top hits that exclusively matched SARS-CoV-2 with greater than 95% identity over more than 90% of their total length (923 and 1752 bases, respectively). SARS-CoV-2 was detected, despite strict dual barcode demultiplexing and removal reads with improper barcode insertions. Previous studies have identified barcode crosstalk, ranging from 0.2% to 0.3% of total classified reads, on nanopore MinION flowcell results [30, 31] . When we examined the total SARS-CoV-2 read counts for a given flowcell on flowcells with false positive negative controls, we saw that one of those flowcells has the highest total SARS-CoV-2 read count of all flowcells in this study, therefore, we would expect higher levels of barcode crosstalk for that flowcell (S2 Fig). We adjusted for barcode crosstalk by controlling for the total number of dual-barcoded SARS-CoV-2 reads on each flowcell. If we assume 0.2% of reads have incorrect barcodes ligated on both ends, and that these misclassified reads are evenly distributed across all barcodes on the flowcell, we can subtract the estimated number of misclassified reads from each sample. This correction yielded an acceptable threshold for classifying specimens as positive or negative. After adjusting for barcode crosstalk in this manner, we find that seven samples and two negative controls with SARS-CoV-2 reads detected would be re-classified as negative, and all negative controls are therefore classified correctly. The overall sensitivity and specificity on clinical samples after adjusting for barcode crosstalk are estimated to be 59.5% (95%CI 43.5%-73.7%) and 100% (56.6%-100%), respectively. Grouping by C t value, the sensitivity estimates are 95.2% (95%CI 77.3%-99.2%) and 12.5% (95%CI 3.5%-36.0%%) for samples below and above C t 30, respectively (Table 3) . 

We assessed the relationship between SARS-CoV-2 RT-PCR C t value and SARS-CoV-2 RPM for dual barcode reads, using stringent demultiplexing analysis parameters. SARS-CoV-2 log-RPM showed a strong linear association with RT-qPCR C t value (R 2 = 0.71), with lower C t values having a higher RPM on average (Fig 1) . This relationship did not differ by RT-qPCR gene target (E-gene, ORF1ab, or RdRp) (S3 Fig). SARS-CoV-2 genome coverage depth showed a similar relationship, with decreasing coverage depth across the entire genome being associated with increasing C t value (Fig 2 and Table 4 ). We produced logistic regression models to assess the probability of attaining greater than 95% genome coverage at 1X, 20X, or 50X depth of coverage. We found that for every one unit increase in C t value, the odds of recovering a 95% complete genome were 0.765 (95% CI: 0.519, 0.961), 0.263 (95% CI: 0.023, 0.666), or 0.263 (95% CI 0.023, 0.666) on average for coverage depths of 1X, 20X, or 50X, respectively (Fig 3) . Interestingly, we did not see any difference in the likelihood of obtaining 95% coverage for 20X or 50X, despite slight differences in coverage depth for both of these thresholds (Table 4 and Fig 3) . SARS-CoV-2 metagenomic reads were used to reconstruct viral genomes. We produced ten complete (greater than 95% unambiguous bases) and one near-complete consensus genome sequence (greater than 80% unambiguous bases) from our 20 SISPA-positive clinical specimens, masking any bases with less than 20X coverage. Two partial viral genomes were constructed with 20-25% unambiguous bases. Pangolin lineage assignment was successful to all complete or near complete genomes; of these five underwent SARS-CoV-2 VOC PCR testing. All five whole or partial viral genomes were classified as SARS-CoV-2 lineages concordant with PCR results (Table 5) . We also detected an additional VOC in a sample that did not undergo VOC PCR testing. We also assessed our complete or near-complete genomes in the context of global SARS-CoV-2 transmission by placing them in a phylogenetic tree containing over two million publicly available SARS-CoV-2 genomes. The ten complete genomes could be placed in the global phylogeny with high confidence (only one maximally parsimonious placement), and the near-complete genome could be placed with lower confidence (nine maximally parsimonious placements). For ten of 11 genomes derived from metagenomic data, the nearest neighbor in this tree was a genome derived from the same province of sample collection, British Columbia. Additionally, for 9/11 study genomes, 80% or more of the nearest 50 genomes were derived from British Columbia; for the remaining two study genomes, 90% or more of the nearest 50 genomes were derived from Canada (Fig 4 and S4 Fig) . The UK samples did not yield well covered genomes. Subtrees with nearest neighbors for all study samples are available in the S4 Fig. 

We searched the BugSeq metagenomic output of our clinical specimens for alternative respiratory viruses or viral or bacterial co-infections. We did not identify any other pathogenic viruses or atypical bacteria such as Chlamydia pneumoniae or Mycoplasma pneumoniae. We did identify several members of the normal nasopharyngeal microbiota, which when found in the lower respiratory tract, may cause disease; these included two samples with Moraxella catarrhalis, seven samples with Haemophilus influenzae or Haemophilus parainfluenzae, three samples with Neisseria meningitidis, three samples with Staphylococcus aureus, two samples with Streptococcus pneumoniae and two samples with Klebsiella pneumoniae (S3 Table) . These results are consistent with other metagenomic sequencing results from the nasopharynx [29] . We searched our data for genes conferring antimicrobial resistance, and identified 10 genes across 6 samples. We found two beta-lactamases in our dataset: blaTEM-234, a class A beta-lactamase which has undetermined spectrum and derived from Escherichia coli in sample P22, as well as blaOXA-85, which confers resistance to amoxicillin and amoxicillin-clavulanate, that derived from Fusobacterium psuedoperiodonticum (P9).

Here, we present a robust analysis detailing the performance of SISPA coupled with nanopore mNGS to detect and characterize SARS-CoV-2 from clinical samples. Clinical specimens exhibiting a C t < 30 performed well. However, test performance declined in specimens exhibiting a C t � 30 from 96.3% sensitivity for samples below C t 30 to 12.5% for samples above this cycle threshold. We found an exponentially declining relationship between RPM and C t value, such that the instantaneous change in read performance was fixed as illustrated in the linear relationship between Log(RPM) and C t value (Fig 1) . This finding is consistent with other reports on the use of SISPA and nanopore mNGS for respiratory infections [11, 32] . However, our results are not consistent with SISPA and mNGS results from blood and serum viral diagnostics, where C t value did not drastically impact genome coverage [33] . These inconsistent results may have been influenced by sample type, sample preparation and the relative abundance of host nucleic acid in different sample types.

Despite limitations in SISPA and nanopore metagenomic sequencing sensitivity, this approach remains a valuable technique for the detection of pathogens that are novel, unexpected or uncharacterized, and therefore unsuitable for targeted approaches such as RT-qPCR or emerging CRISPR-Cas-based diagnostics, which focus only on known pathogens [34] . Unlike these existing diagnostic methods, nanopore mNGS can theoretically detect any pathogen and co-infections, characterize changes in the site-specific microbiota, and capture the carriage of critical virulence or antibiotic-resistant organisms or genes, all of which can impact patient outcomes. Our approach identified several organisms in the nasopharyngeal microbiota that may cause disease in the lower respiratory tract, consistent with sequencing results from a recent study [29] . We also did not detect any viral or atypical bacterial co-infections (S3 Table) , concordant with previous reports of a low prevalence of respiratory co-infection in 

COVID-19 positive samples [35] [36] [37] . In support of this finding, our study regions saw a dramatic reduction in incidence of other respiratory viruses (eg., influenza and RSV) and bacterial pathogens over our collection period, thought to be secondary to public health interventions.

We additionally assessed the ability of SISPA-based mNGS to classify and assemble complete or partial SARS-CoV-2 genomes from RT-qPCR positive specimens. This method can perform dual diagnostic and molecular epidemiology functions. Reliably, we were able to assemble near-complete genomes (minimum 20X coverage) up to C t 25, underscoring the ability of this approach not only to detect emerging pathogens, but also to characterize them without a priori knowledge of a pathogen's genome sequence. This ability contrasts to ampliconbased sequencing methods, which require the viral sequence to develop primers [38] . We performed lineage typing on metagenomic-derived SARS-CoV-2 genomes and found perfect concordance with VOC PCR on a small subset of our samples. Moreover, with the complete and partial genomes we were able to distinguish the P.1 variant from the B.1.351 variant, which our PCR assay was unable to do, as both variants contain the E484K and N501Y mutations in their spike genes targeted by the PCR assay. Our reconstructed viral genomes were further validated through phylogenetic analyses, where 10/11 samples that were of British Columbian origin were most closely related to another British Columbia genome sequence. This highlights the potential of mNGS sequencing to be an all-in-one assay which detects and characterizes pathogens of interest in near real-time, providing critical information for clinical care, infection prevention and control and public health interventions.

This study examined the methodological feasibility and validity of nanopore mNGS. We observed false positive SARS-CoV-2 reads in our negative control samples despite meticulous laboratory preparation, including performing nucleic acid extractions in a biological safety cabinet, using freshly aliquoted reagents, decontamination of all surfaces with ethanol and RNaseZap (Thermo Fisher Scientific), and performing pre-amplification steps in a dedicated 

PCR area. After investigating these reads, we attribute them to barcode crosstalk, in accordance with previous studies [29, 30] . While BugSeq implements methods to minimize barcode crosstalk from nanopore sequencing, including requiring barcodes to be present at both ends of each read and removal of reads with barcodes integrated elsewhere, we developed a method to adjust the total read counts on a flowcell for barcode crosstalk. These enhancements improved assay specificity; however, sensitivity is negatively impacted by this read count adjustment. Interestingly, using the estimated 0.2% expected crosstalk between barcodes based on existing reports in the literature, we find far fewer false positive reads in our negative controls than would be expected (1 read found in each versus 3 and 107 reads expected). We do note that native barcoding on the nanopore platform is not fully optimized, leading to a significant portion of reads with only a single barcode in our sequencing datasets. This results in a decreased sensitivity, when requiring that barcodes be present on both read ends. Future advances in sequencing chemistry may reduce the prevalence of barcode crosstalk while preserving assay sensitivity. In addition to employing automated demultiplexing and minimizing barcode crosstalk for nanopore mNGS, we validated the BugSeq as a potentially powerful clinical bioinformatics platform and workflow, including quality control, data visualization, taxonomic classification, consensus sequence generation, data aggregation, and results reporting. Although a lack of straight-forward and user-friendly bioinformatics pipelines has long been a deterrent for clinical laboratories implementing NGS and mNGS methods, our use of BugSeq as a rapid and robust bioinformatics tool has demonstrated the utility of user-friendly platforms for clinical diagnostics and public health service. Indeed, other groups adopting MinION sequencers in clinical microbiology laboratories have reached similar conclusions [39, 40] .

Our pilot study has several limitations. Despite the MinION sequencing device providing high-throughput sequencing data in real-time, this protocol is still significantly more time intensive than RT-PCR as a diagnostic method, requiring a minimum of 12 hours from sample collection to prepared library, and another 72 hours of sequencing to reach maximal pathogen detection sensitivity (although results could be available in as little as 1-2 hours for high viral load samples). The use of liquid handling robots for automated sample extraction, nucleic acid amplification, and library preparation may aid in standardization. Additionally, examining the feasibility of a less time intensive library preparation protocol such as the Rapid Barcoding Kit (Oxford Nanopore Technologies) for this approach will aid in the optimization and translation of nanopore mNGS for routine clinical use. The SISPA approach is also limited in that it performs random amplification of both host and microbial nucleic acids. The high percentage of host RNA in nasopharyngeal/oropharyngeal swabs limits our ability to rapidly detect viruses with comparable sensitivity to PCR, requiring deeper sequencing than what is currently feasible on a MinION. Therefore, this sequencing strategy may not be optimal for samples expected to have very few viral or bacterial nucleic acids where sensitivity is paramount. We note that 

while assay sensitivity has played an important role in public discourse surrounding SARS--CoV-2 testing, there is some data to suggest that lower viral loads cannot be cultured and are less likely to be transmissible (https://www.idsociety.org/globalassets/idsa/public-health/ covid-19/idsa-amp-statement.pdf). This issue is further complicated by the difficulty of employing host nucleic acid removal techniques on low-biomass samples. Interestingly, the detection of host nucleic acids via mNGS may be useful, as samples with lower host nucleic acid content have been shown to be associated with higher rates of false-negative COVID-19 RT-PCR tests, presumably due to sample quality [41] . Regardless, methods to enrich for pathogen sequences or deplete host DNA to increase sensitivity have been examined [42] [43] [44] , and may prove useful for future clinical metagenomics studies. Our pilot study represents the first analysis to examine the performance and feasibility of SISPA-based nanopore mNGS for the detection and characterization of SARS-CoV-2. We improve on previous studies through quantification of the performance of this method, as well as examining the utility of this assay to assemble high-quality genomes for phylogenetic analysis. We were able to successfully detect SARS-CoV-2 with 100% specificity and near perfect sensitivity for samples below C t 30 when adjusting for barcode crossover. We were also able to assemble SARS-CoV-2 genomes and characterize viral lineages reliably in 10/13 of samples below C t 25. This assay has the ability not only to detect known pathogens and co-infections, but can also detect emerging pathogens, assess microbiota states, and capture resistance and virulence genes. This approach holds promise as a tool for clinical diagnostics and public health surveillance.

Supporting information S1 Table. Detection of potential pathogens in study samples. Only pathogens with greater than 1% relative abundance in samples with at least 1000 bacterial reads were included. 

A new coronavirus associated with human respiratory disease in China

The global and local distribution of RNA structure throughout the SARS-CoV-2 genome

Detection of 2019 -nCoV by RT-PCR

Molecular immune pathogenesis and diagnosis of COVID-19

Overcoming the bottleneck to widespread testing: A rapid review of nucleic acid testing approaches for COVID-19 detection

Sequence-independent, single-primer amplification (SISPA) of complex DNA populations

Use of Sequence-Independent, Single-Primer-Amplification (SISPA) for rapid detection, identification, and characterization of avian RNA viruses

Diagnosis and characterization of canine distemper virus through sequencing by MinION nanopore technology

First genomic characterization of a Belgian Enterovirus C104 using sequence-independent Nanopore sequencing

Rapid metagenomic identification of viral pathogens in clinical samples by real-time nanopore sequencing analysis

Metagenomic nanopore sequencing of influenza virus direct from clinical respiratory samples

Limited SARS-CoV-2 diversity within hosts and following passage in cell culture

Amplicon based MinION sequencing of SARS-CoV-2 and metagenomic characterisation of nasopharyngeal swabs from patients with

Third-Generation Sequencing in the Clinical Laboratory: Exploring the Advantages and Challenges of Nanopore Sequencing

Clinical metagenomics

Highlighting Clinical Metagenomics for Enhanced Diagnostic Decision-making: A Step Towards Wider Implementation

Nanopore metagenomics enables rapid clinical diagnosis of bacterial lower respiratory infection

Identification of bacterial pathogens and antimicrobial resistance directly from clinical urines by nanopore-based metagenomic sequencing

From the pipeline to the bedside: Advances and challenges in clinical metagenomics

One Codex: A Sensitive and Accurate Data Platform for Genomic Microbial Identification

IDseq-An open source cloud-based pipeline and analysis service for metagenomic pathogen detection and monitoring. Gigascience

BugSeq: a highly accurate cloud platform for long-read metagenomic analyses

Recentrifuge: Robust comparative analysis and contamination removal for metagenomics

Ultrafast Sample placement on Existing tRees (UShER) enables real-time phylogenetics for the SARS-CoV-2 pandemic

NextStrain: Real-time tracking of pathogen evolution

Interactive tree of life (iTOL) v3: an online tool for the display and annotation of phylogenetic and other trees

ResFinder 4.0 for predictions of phenotypes from genotypes

RStudio: Integrated Development for

Nanopore metagenomic sequencing of influenza virus directly from respiratory samples: diagnosis, drug resistance and nosocomial transmission

Detection of viral pathogens with multiplex nanopore MinION sequencing: Be careful with cross-Talk

Deep Demultiplexing barcoded Oxford Nanopore reads with Deep convolutional neural networks

A random priming amplification method for whole genome sequencing of SARS-CoV-2 and H1N1 influenza A virus

Assessment of metagenomic Nanopore and Illumina sequencing for recovering whole genome sequences of chikungunya and dengue viruses directly from clinical samples

SHERLOCK: nucleic acid detection with CRISPR nucleases

Bacterial co-infection and secondary infection in patients with COVID-19: a living rapid review and meta-analysis

Co-infections in people with COVID-19: a systematic review and meta-analysis

Prevalence of co-infection at the time of hospital admission in COVID-19 Patients, A multicenter study

Zika and other virus genomes directly from clinical samples

Next-generation sequencing for cytomegalovirus antiviral resistance genotyping in a clinical virology laboratory

Rapid detection of SARS-CoV-2 variants of concern, including B.1.1.28/P.1, British Columbia

Suboptimal biological sampling as a probable cause of false-negative COVID-19 diagnostic test results

Metagenomic sequencing with spiked primer enrichment for viral diagnostics and genomic surveillance

Evaluation of methods for the reduction of contaminating host reads when performing shotgun metagenomic sequencing of the milk microbiome

Reduction of Human DNA Contamination in Clinical Cerebrospinal Fluid Specimens Improves the Sensitivity of Metagenomic Next-Generation Sequencing

We would like to acknowledge the British Columbia Public Health Laboratory and the Medical Microbiology Laboratory at Vancouver General Hospital for providing RT-PCR testing for a subset of our samples, as well as John Tyson from the BC Centre for Disease Control for technical support and troubleshooting.