key: cord-0749404-02cicr7k authors: Challen, Robert; Tsaneva-Atanasova, Krasimira; Pitt, Martin; Edwards, Tom; Gompels, Luke; Lacasa, Lucas; Brooks-Pollock, Ellen; Danon, Leon title: Estimates of regional infectivity of COVID-19 in the United Kingdom following imposition of social distancing measures date: 2021-07-19 journal: Philos Trans R Soc Lond B Biol Sci DOI: 10.1098/rstb.2020.0280 sha: cd8a9b288f144101676d9da57d0b4b96ecafed47 doc_id: 749404 cord_uid: 02cicr7k The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) reproduction number has become an essential parameter for monitoring disease transmission across settings and guiding interventions. The UK published weekly estimates of the reproduction number in the UK starting in May 2020 which are formed from multiple independent estimates. In this paper, we describe methods used to estimate the time-varying SARS-CoV-2 reproduction number for the UK. We used multiple data sources and estimated a serial interval distribution from published studies. We describe regional variability and how estimates evolved during the early phases of the outbreak, until the relaxing of social distancing measures began to be introduced in early July. Our analysis is able to guide localized control and provides a longitudinal example of applying these methods over long timescales. This article is part of the theme issue ‘Modelling that shaped the early COVID-19 pandemic response in the UK'. In late 2019, an outbreak of a novel infectious disease was detected. It manifested principally with severe acute respiratory distress and pneumonia, [1] although many cases followed a mild course [2] . The pathogen was rapidly identified as a new species of coronavirus (severe acute respiratory syndrome coronavirus 2, SARS-CoV-2) and the disease named COVID-19 [3] . Global transmission of the virus followed and major outbreaks have been observed in Europe, beginning with Italy [4] . On 31 January 2020, the first cases were identified in the UK [5] . This was initially managed using testing of suspected individuals in the community, contact tracing and isolation of affected cases. However, this was successful only in delaying the spread of the disease and on 13 March 2020, the UK government moved towards a mitigation strategy reserving testing for hospital inpatients only [6] . Following this, a stepwise implementation of social distancing measures was mandated by the government including voluntary self-isolation of any symptoms and vulnerable people [7] , a ban on non-essential travel worldwide [8] and school closures [9] . Finally on 23 March 2020, the government mandated that everyone apart from essential workers should stay at home and away from others [10] , instituting a countrywide 'lock-down'. Epidemiological studies conducted during the outbreak in China have provided us with a number of estimates of the parameters describing the virus's spread through the population including a reproduction number between 2.24 and 3.58 [11] and a median incubation period of 5.1 days (credible interval 4.5 to 5.8) [12] . It is estimated that fewer than 2.5% of people will show signs before 2.2 days and 97.5% of people who will develop symptoms will have done so by 11.2 days after exposure [12] . We investigated the reproduction number of SARS-CoV-2 in the UK to determine whether there are any spatial or temporal patterns beyond those resulting from the imposition of social distancing measures, and to track the progression of the outbreak. This article summarizes the methodology and interpretation of national and regional estimates of the time-varying reproduction number (R t ) of the SARS-CoV-2 outbreak in the UK. These estimates were provided to the Scientific Pandemic Influenza Group on Modelling (SPI-M) [13] and formed part of the weekly UK R t estimates [14] . This section describes the data sources, their processing and combination, and our methodology for estimating the serial interval of SARS-CoV-2 infections and calculation of R t estimates. We integrate data from a variety of sources, both publicly available and provided to the SPI-M [13] by Public Health England (PHE) and the Defence Science and Technology Laboratory (DSTL) [15] . We use these data to estimate R t and the exponential growth rate for the UK as a whole, four nations of the UK (CTRY) and seven NHS regions in England (NHSER). At the UK level, data are available on cases and deaths through the PHE coronavirus tracker [16] . The tracker publishes an overall number of cases and deaths in the UK on a daily basis. It also provides a regional breakdown of the four nations, which exclude tests performed in private laboratories (Pillar 2 tests). At the time of this analysis, the historical time series of the UK level data was not made available through the PHE site; however, this information was collected prospectively and curated by Tom White's aggregated COVID 19 UK data github site [17] . Cumulative case counts from both the PHE headline UK figure and the combined sum of the four nations are compared as these numbers differ. Hospital admission data are available from NHS trusts across the UK via the DSTL, which in turn aggregate the situation reports provided by NHS hospital trusts. These are aggregated to UK level. Although referred to here as 'hospital admission', it includes admissions of patients who are subsequently identified as COVID-19 cases in hospital, but identified in the hospital, and patients with known COVID-19 who are then admitted to hospital. For the four devolved nations of the UK, we used different data sources for each nation. In England, we used data from the SPI-M provided line lists for cases and deaths in England. Cases are restricted to those processed in NHS labs (Pillar 1) and are available by date of specimen collection. For the other three nation states of the UK, as above, both historical cases and death data are aggregated from Public Health Wales [18] and Scotland's [19] sites, and from Northern Ireland's HSC site [20,] respectively, using a time series retrieved from Tom White's aggregated COVID 19 UK data github site [17] for Scotland, Wales and Northern Ireland. Death data from the four nations are provided via the CHESS (COVID-19 hospitalisation in England surveillance system) dataset [21] . Death data are subject to a weekly periodicity due to reporting delay over the weekend which is mitigated by using the date of death rather than the date of the report. At the level of the NHS England regions, we take the case data from anonymized test result line listings. Mortality data for NHS England are provided by PHE in a canonical line list of deaths and is used alongside the CHESS dataset [21] . Admissions data are available from DSTL feeds and ICU admissions from CHESS dataset [21] . For England as a nation and for the NHS England regions, we also have data available from triage telephone calls from NHS 111 and 999 services. The data on the calls made to 111 and 999 as well as the outcome of that call are provided as aggregate numbers broken down by age. For all data sources, cumulative case figures are converted into daily incidence figures and any data which are broken down by age, or by gender, are combined. In case and death data, the final 5 days of the time series are discarded to account for possible reporting delay. The resulting time series are analysed for outlying data points, which are more than five standard deviations away from the mean of the nearest 14 data points. Outlying or missing data are imputed from a linear interpolation of the logarithm of incidence figures, implemented in the R 'forecast' library [22] , and the results are truncated to ensure no negative incidence figures. A smoothing function (a linear spline interpolation) is then fitted to the logarithm of incidence applied over a 7-day window [23] . This is needed as all the data sources have some degree of weekly periodicity regardless of source. Our estimates are based on an aggregation of the various data sources described above. We generate four estimates of R t based on single time series from each data stream: The aggregation procedure is kept simple and combines multiple data sources when applicable using the mean. Any possible biases this introduces are consistent throughout the time series so that it does not affect relative changes and hence either estimates of R t or growth rates. The resulting time series are manually inspected for consistency and to check there are no abrupt changes in the data streams. The source of the combined datasets and more information about the processing steps used is shown in the electronic supplementary material, table S1. for the generation interval. The use of the serial interval as a proxy for the generation interval is known to produce biased estimates for the reproduction number [24, 25] , but has the advantage of being directly observed through contact tracing. Assumptions about the serial interval of SARS-CoV-2 have an impact on the absolute level of our estimates of R t . We have used multiple approaches to estimate the serial interval. First, a UK specific serial interval was calculated from early case tracking data (the FF100 case data provided by DSTL). Second, a literature review was conducted and the serial intervals from a range of sources [4, [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] pooled [36] . The serial interval can be well described by a truncated empirical distribution, with a mean plus 95% credible interval of 5.59 days (5.09; 6.20), and a standard deviation of 4.15 days (3.94; 4.46). This uncertainty in the serial interval distribution is propagated to our estimates of R t and used to determine confidence intervals. In other work, we have analysed the effect of the pragmatic use of serial interval instead of generation interval and find the effect on estimates of R t to be small (approx. 5% of the absolute value) when it is close to one. This choice does not influence the estimate of time when R t transitions from growth to decay [36] . Using the inferred serial interval distribution, we analysed the time-series data using the forward equation method [37] , implemented in the EpiEstim R library [37] [38] [39] , to estimate the R t during the outbreak. The renewal equation method is predicated on a time series of infections and on the infectivity profile-a measure of the probability that a secondary infection occurred on a specific day after the primary case, given a secondary infection occurred [37] . A Bayesian framework is then used to update a prior probabilistic estimate of R t on any given day with both information gained from the time series of infections in the epidemic to date and the infectivity profile to produce a posterior estimate. In both the original [38] and revised [39] implementations of this method, the authors acknowledge the pragmatic use of the serial interval distribution as a proxy measure for the infectivity profile, and the incidence of symptom onset or case identification as a proxy for the incidence of infection, with the caveat that these introduce a time lag into the estimates of R t . We make the simplifying assumption that there is negligible mixing of populations between each geographical area and treat each location independently. The method uses a sliding time window during which the instantaneous reproduction number is assumed to be constant. We used both a 7-day and a 28-day sliding window for calculations of the R t which provides two estimates with alternative trade-offs between noise and loss of detail. Our R t estimate is calculated using a loosely informed prior estimate of R t as a gamma distribution with a mean of 1 and a standard deviation 2. This prior distribution is based on an assumption of the approximate value of R t on the conditions following lock-down, rather than reflecting values of R 0 commonly described in the literature [11] as those are based on the situation without social distancing measures in place. Other events in the timeline of infection also serve as a proxy for observations of infections in the past including positive testing, hospitalization for severe disease, or death. Although best practice is to calculate R t using a generation interval distribution and infection events [25] , neither the generation interval distribution nor the infection event data can be directly observed, and inferring them can also introduce potential bias and uncertainty. As a pragmatic initial step, we use the serial interval distribution described above in lieu of the generation interval, and the various observations available to us, including triage contacts, cases, admissions and deaths as a proxy of prior transmission events, and compare those results. There is a time delay between infection, symptom onset, case identification, hospital admission and ultimately death, and this affects the timing of our estimation of R t . In a separate analysis, we estimated these time delays (shown in electronic supplementary material, table S2) and apply these estimates as a correction to the time of our estimates of R t to align them to the date of presumed infection. Code and processed data involved in this analysis are available on GitHub [40] . Our estimate of the median value of R t for the UK based on cases, deaths and hospital admissions from 4 July 2020 is presented in table 1. In figure 1a, we show the incidence per million people of cases, deaths and hospital admissions due to COVID-19 in the UK over the outbreak; figure 1b shows the associated values for R t . The three data sources show similar patterns of exponential increase, with admissions and deaths lagging cases followed by a slower phase of exponential decline, beginning 2-3 weeks after the lock-down. In figure 1b, we see the estimates of R t corrected to date of infection. There is a prominent single initial peak in R t from admissions and deaths in late February, followed by a decline over the course of the next few months. R t crosses 1 at the beginning of April, after which it remains below 1 during the lock-down period. Estimates based on cases show a biphasic pattern with an initial peak in mid-February and a second smaller peak in early March, following the same pattern as other estimates. The peak values of R t vary by observation with peak R t by admissions being 8.3, by cases 4.8 and by deaths 3.3. These are within the confidence limits of estimates described in other countries [11] . Estimates of R t in the different countries of the UK, based on cases, deaths, hospital admissions or triage calls for 4 July 2020 are presented in table 2 and figure 2. Triage figures based on 111 and 999 coronavirus pathway calls were available for England only; we do not have access to the full time series of all information for all countries. We show estimates based on a 28-day rolling window as cases and deaths in Northern Ireland and Scotland have fallen to a level which makes estimates over a shorter window unreliable. With insufficient information, the Bayesian method used reverts to the prior value of R 0 supplied which we set to 1. These estimates show the median value of R t is below 1 for all four nations, using all data sources. The pattern in all nations is similar with R t rapidly decreasing following lock-down on 23 March and becoming less than 1 in early April. Northern Ireland and Scotland have maintained a lower R t for a longer period of time than England and Wales, with R t values in Northern Ireland and Scotland at or below 0.75 for much of May, June and July compared to those in England and Wales, which have been between 0.75 and 1 for the same period. In figure 3 (and, for completeness, electronic supplementary material, table S3), we present the same results as above but with a focus on the NHS regions in England. On 4 July 2020, the estimates of the mean of R t were largely below 1 in the individual NHS regions. The observed count of different observations demonstrates a clear regional difference between London and the South West and the rest of the country with lower rates of all indicators than other regions. The time series of regional estimates of R t reflect the overall patterns of England, albeit with more volatility due to the different windowing size between figures 2 and 3. It is, however, possible to see higher levels of uncertainty in the South West reflecting the smaller case numbers and to a lesser extent the same in London. In figure 4 , we plot the absolute difference of R t in the seven NHS England administrative regions, from the R t of England overall, as a baseline for each data source. This is based on 28-day window estimates due to the volatility observed in figure 3 . This analysis highlights the regional differences in R t over time. Over the period of the lock-down, the East of England, Midlands and South East regions approximately tracked the England baseline. The South West was seen to be initially following the national average but from June demonstrates a trend towards a lower value, although our confidence in these estimates is low. When lock-down started, London was initially well below the England average, by most indicators, and this continued until some point in late May, after which the trend reversed. On the other hand, the North West and less so North East and Yorkshire were consistently above the rest of the country until late May when they eventually reached the England average, and since mid-June, the R t estimates in the North West have been lower than this In this paper, we estimated the reproduction number, R t , for COVID-19 in the UK using multiple data sources over a range of geographies and time points, and with the same methodology. We find that, after the initial peak, different data sources produce similar results, without evidence of systematic bias for estimates based on more immediate measures (cases), compared to those based on longer term measures (deaths). In the UK, R t peaked in mid-February 2020, coinciding with the end of the school holidays. We find that using different data sources affects the estimated size of peak burden although with considerable uncertainty. Figure 2 . The median value of R t and 95% confidence intervals for the individual countries in the UK, based on cases, deaths and hospital admissions, and a 28-day rolling window. For each data source, red points represent data points that were missing and have been imputed. (g) (f) Figure 3 . The median value of R t and 95% confidence intervals for the sub-national regions of NHS England, based on cases, deaths and hospital admissions, and a 7-day rolling window. royalsocietypublishing.org/journal/rstb Phil. Trans. R. Soc. B 376: 20200280 We find that R t declined rapidly following lock-down on 23 March but did not reach the critical threshold (R t less than one) separating growth and decline until early April. This delay is likely to be the combination of ongoing transmission within households, care homes and hospitals, or outbreaks in factories in key industries such as food production. Other factors that may influence the timing are delays in case identification and reporting, and limitations in the estimation methods. Subsequent to mid-April, we estimate R t largely remained below one until the end of the lock-down period. The multiple data sources we considered each have their advantages and drawbacks. Counts of test-positive cases and telephone triage calls provide a rapid indication of infection risk and capture a broad representation of age groups, but may be influenced by changes in behaviour and testing policy. In the UK, initial attempts at community tracing were abandoned when case numbers started to outstrip test availability and afterwards testing was only performed on hospital admissions for suspected COVID-19 [6] . Later, test capacity was increased and the policy reversed to include more community cases, again altering the nature of the population being tested. Although a regional breakdown of testing capacity was not available at the time of this analysis, we do know that capacity was exceeded in the early phase of the epidemic, and this is one reason why case-based R t estimates must be interpreted with caution until the middle of April. Hospital admissions and death data are less subject to changes in sampling strategy, although are subject to reporting delays and biases in ascertainment. As COVID-19 mortality is overwhelmingly in the elderly, statistics based on deaths mainly represent older groups. Due to reduced contact in the elderly, we propose the outbreak took longer to become established in those age groups. Counts of admissions may be unreliable when there is a delay in identifying a COVID-19 case, or when there is significant hospital transmission, as was the case in the early outbreak. We took a pragmatic approach for sub-national analyses, based on data availability. In early April 2020, immediately following lock-down, estimates of R t were lowest in London and highest in the North West and North East of England. At this time, the burden of cases was highest in London at nearly 50 cases per million people per day, but this reduced 25-fold over the lock-down period. In early July 2020, at the relaxation of lock-down, the case rates per capita were Figure 4 . The difference of R t estimates for NHS regions and baseline R t estimates for England, based on cases, deaths and hospital admissions, and a 28-day rolling window. lowest in the South West, due to the smaller initial outbreak size, followed by London due to the larger impact of social distancing. However, the benefit of lower case rates in London was offset by relative increases in R t . When case numbers are low, R t ceases to be a uniform statistic over a geographical area, because significant town to town variation will exist as clusters of infection become apparent. This was seen in the South West of England towards the end of the lock-down where increasing variability in regional estimates of R t became less obviously significant. This reinforces the point that R t is a relative measure and should not be interpreted without information about the incidence rate. Our approach has a number of limitations. Our method treats the whole system and each region as independent and isolated. In reality, regions are connected via travel, although this was reduced during early social distancing measures in March and April. Furthermore, in the early phases, importation rates were high [41] , and this would lead to our approach overestimating the true R t . We present a description of the methodology and data sources used in providing estimates of R t in the UK for SPI-M [14] . Our approach is pragmatic and designed to produce timely, useful information to policy makers. Despite this, we find that using a number of data sources and careful interpretation helps elucidate the regional differences in R t and shows they existed from the outset of lock-down and persisted during lock-down. Due to the compound nature of R t , the result of this variation is higher case loads in Northern regions in the UK exiting lock-down. As we move forward, early detection and prevention of the spread of emerging clusters of SARS-CoV-2 infections are critical to prevent large-scale outbreaks. This will be challenging as the long incubation period and high rate of asymptomatic individuals makes undetected rapid spread easy. Prediction at a more localized level is needed to focus both community testing and more targeted social interventions on high-risk areas in the future. Critical to this work continues to be rapid access to information about the spread of SARS-CoV-2 in the community both with high spatial resolution, but also with a short-time lag from infection to observation. As test and trace activities ramp up, we expect to see similar biases in case related data as testing volumes change locally in response to outbreaks. Our existing approaches to estimating R t principally use hospital-based metrics and as such may not provide the perspective on the outbreak that is needed in the future. Telephone triage data are one potential source of information about local outbreaks and an area for future investigation [42] . Data accessibility. Data and code supporting this article can be accessed on GitHub at the following link: https://github.com/terminological/uk-covid-datatools/tree/master/vignettes/current-rt. Authors' contributions. All authors discussed the concept of the article and R.C. wrote the initial draft. K.T.A., M.P., T.E., L.G., L.L., E.B.P. and L.D. commented and made revisions. All authors read and approved the final manuscript. R.C. is the guarantor. The views presented here are those of the authors and should not be attributed to TSFT or the GDE. Clinical features of patients infected with 2019 novel coronavirus in Wuhan Characteristics of and important lessons from the coronavirus disease 2019 (COVID-19) outbreak in China: summary of a report of 72 314 cases from the Chinese Center for Disease Control and Prevention Naming the coronavirus disease (COVID-19) and the virus that causes it The early phase of the COVID-19 outbreak in 2020 Lessons for managing high-consequence infections from first COVID-19 cases in the UK COVID-19: investigation and initial clinical management of possible cases COVID-19: guidance on social distancing and for vulnerable people 2020 Travel advice: coronavirus (COVID-19) Closure of educational settings: information for parents and carers 2020 Full guidance on staying at home and away from others Preliminary estimation of the basic reproduction number of novel coronavirus (2019-nCoV) in China, from 2019 to 2020: a datadriven analysis in the early phase of the outbreak 2020 The incubation period of coronavirus disease 2019 (COVID-19) from publicly reported confirmed cases: estimation and application Scientific pandemic influenza group on modelling (SPI-M) The R number and growth rate in the UK. GOV Defence science and technology laboratory Total UK COVID-19 cases update In press. Covid-19-uk-data Public Health Wales statement on Novel Coronavirus (COVID-19) outbreak HSC Public Health Agency. COVID-19 surveillance reports Coronavirus (COVID-19): using data to track the virus -Public health matters forecast: Forecasting functions for time series and linear models Locfit: local regression, likelihood and density estimation Estimation in emerging epidemics: biases and remedies Practical considerations for measuring the effective reproductive number Epidemiology and transmission of COVID-19 in 391 cases and 1286 of their close contacts in Shenzhen, China: a retrospective cohort study Serial interval of COVID-19 among publicly reported confirmed cases Estimating the generation interval for coronavirus disease (COVID-19) based on symptom onset data Early transmission dynamics in Wuhan, China, of novel coronavirus-infected pneumonia Serial interval of novel coronavirus (COVID-19) infections Evidence for transmission of COVID-19 prior to symptom onset 2020 Household transmissions of SARS-CoV-2 in the time of unprecedented travel lockdown in China Estimation of the time-varying reproduction number of COVID-19 outbreak in China Evolving epidemiology and transmission dynamics of coronavirus disease 2019 outside Hubei province, China: a descriptive and modelling study Estimating the serial interval of the novel coronavirus disease (COVID-19): a statistical analysis using the public data in Hong Kong from 2020 Impact of uncertainty in serial interval, generation interval, incubation period and delayed observations in estimating the reproduction number for COVID 19 In press. Estimate time varying reproduction numbers from epidemic curves A new framework and software to estimate time-varying reproduction numbers during epidemics Improved inference of time-varying reproduction numbers during infectious disease outbreaks Terminological/uk-covid-datatools: Zenodo initial release Preliminary analysis of SARS-CoV-2 importation & establishment of UK transmission lineages Analysis of temporal trends in potential COVID-19 cases reported through Competing interests. We declare we have no competing interests. Funding. Support for R.C. and K.T.A.'s research is provided by the