key: cord-0744421-ey1bgqno
authors: De Grazia, Federico; Marconi, Stefania; Bardone, Marco; Mauro, Aurelio; Alaimo, Gianluca; Auricchio, Ferdinando; Pietrabissa, Andrea; Di Sabatino, Antonio
title: Use of 3D printer for face mask production to protect endoscopy unit personnel in contact with high-risk patients during COVID-19 pandemic
date: 2020-10-26
journal: Endoscopy
DOI: 10.1055/a-1206-0937
sha: 1d7ac7a5ea6bf0b52be3d2a2cb744e2ca5f11551
doc_id: 744421
cord_uid: ey1bgqno

nan

Endoscopy unit personnel are exposed to COVID-19 infection from inhalation of airborne droplets [1, 2] . Peri-endoscopic aerosolized infections have indeed been reported, making upper gastrointestinal endoscopy a high-risk procedure [3, 4] . In the current situation, infection prevention represents the only way to ensure the safety of both endoscopy unit personnel and patients. Whenever possible, patients who are considered at high risk or who have confirmed COVID-19 infection should undergo endoscopy in a negative-pressure room [5] . However, such a dedicated facility is not universally available to all endoscopy units, thus limiting the degree of preventive measures in most centers to protective clothing for endoscopists, specialist nurses, and technicians. We had an idea to create a negative pressure micro-environment inside a ventilation mask, which was modified to allow easy passage of the endoscope into the mouth while allowing simultaneous administration of oxygen and use of suction. Two separate holes of appropriate size were therefore drilled into the original disposable ventilation mask for oxygen inflow and/or suction respectively. Sealed passage of the endoscope was achieved by use of a soft-valve adapter that fits to the existing built-in plastic cylinder of the original mask (▶ Fig. 1,  ▶ Fig. 2) . In order to provide sufficient gas flow for effortless respiration and low intra-mask negative pressure, disposable gas flow adapters were also manufactured using the 3 D printing technology, which was available at our clinical laboratory for 3 D printing, 3D4Med. The STL files of the described adaptors are downloadable for free at www. 3d4med.eu. An oxygen inflow rate of 8 L/min and vacuum suction at a negative pressure of 200 millibar (with safety filter interposition) (▶ Fig. 3 ) provided the best toler-ability and function of the device, as tested on healthy volunteers. A modified ventilation mask provides a low-cost alternative when negative-pressure room facilities are not available. It proved effective in creating a micro negative-pressure environment around the patient's mouth and nose. This device can be easily manufactured by hospitals at a relatively low cost using available 3 D printing technology. Although long-term data are needed to confirm the efficacy of this mask in providing protection against COVID-19 transmission, we believe that it could represent a suitable alternative when negative-pressure endoscopy rooms are not available.

Clinical features of patients infected with 2019 novel coronavirus in Wuhan, China

COVID-19: gastrointestinal manifestations and potential fecal-oral transmission

Factors involved in the aerosol transmission of infection and control of ventilation in healthcare premises

The British Society of Gastroenterology

ASGE Quality Assurance in Endoscopy Committee. et al. ASGE guideline for infection control during GI endoscopy