key: cord-0743609-5bwu29d0 authors: Hu, Bisong; Zhang, Qianqian; Tao, Vincent; Wang, Jinfeng; Lin, Hui; Zuo, Lijun; Meng, Yu title: Assessing work resumption in hospitals during the COVID‐19 epidemic in China using multiscale geographically weighted regression date: 2022-04-06 journal: Trans GIS DOI: 10.1111/tgis.12927 sha: bbb6a2d24af608637d57cc4e565530d2ccf18bf1 doc_id: 743609 cord_uid: 5bwu29d0 The resumption of work and production is one of the key issues during the novel coronavirus (COVID‐19) post‐epidemic phase. We used location‐based service data of mobile devices to assess the work resumption of 22,098 hospitals in mainland China. The multiscale influences of the determinants on work resumption in hospitals, including medical‐service capacity, human movement, and epidemic severity, were examined using the multiscale geographically weighted regression technique. This study provides a novel insight into the assessment of work resumption in hospitals and its determinants, and is flexible to be extended to evaluate the work resumption of other industries. The findings can introduce helpful information for other countries to implement the strategies of work recovery during the post‐epidemic phase. In January 2020, the atypical pneumonia caused by novel coronavirus was reported in Wuhan, Hubei Province, China , and a large-scale outbreak started and spread to the entire country within 1 week. Concurrently, confirmed cases were identified in other countries (Holshue et al., 2020; Rothe et al., 2020) and the COVID-19 epidemic became a global public health concern (Wang, Horby, Hayden, & Gao, 2020; WHO, 2020) . China made great efforts to control the epidemic spread in the next 2-3 months Xu, Ao, et al., 2020) , then to prevent international importations. At the same time, the COVID-19 pandemic has produced enormous shocks to the world in terms of health, socioeconomics, and natural environment (Sarkodie & Owusu, 2020) . It is still a global ongoing threat, and the cumulative number of global confirmed cases is approaching 140 million (as at April 15, 2021; China CDC, 2021) . During the early phase of the COVID-19 epidemic, infections were mainly linked to Wuhan, China (Li, Guan, et al., 2020; Zhu et al., 2020) , and human movement from the epidemic source explained the majority of the spatiotemporal spread of the virus nationwide and worldwide (Hu, Qiu, et al., 2020; Jia et al., 2020; Kraemer et al., 2020; Wu, Leung, & Leung, 2020) . Strict control measures, such as transportation screening and self-isolation restrictions, were evidently effective to control massive human movement and large-scale epidemic spread (Chinazzi et al., 2020; Tian et al., 2020; Xu, Ao, et al., 2020) . The epidemic spread was associated with regional population structure (O'Sullivan, Gahegan, Exeter, & Adams, 2020) , meteorological factors, and air quality (Liu, Zhou, et al., 2020; Xu, Yan, et al., 2020 ). The regional disparities of healthcare resource availability introduced various levels of epidemic severity across regions (Ji, Ma, Peppelenbosch, & Pan, 2020) . How people were exposed, such as through households, public transportation, or healthcare contacts between individuals, influenced the risk of infection (Luo et al., 2020) . The transmission risk among train passengers showed significant differences with co-travel time and seat location . Individual mobility restrictions were positively effective in controlling city-level outbreaks . During the COVID-19 post-epidemic phase, the resumption of work and production became the main focus in China. The timing for the resumption of work and its impact on the risk of a secondary outbreak can be estimated (Wang, Tang, et al., 2020) . The work resumption strategies were evaluated and the corresponding risk assessments can be provided for decision-making (Bai et al., 2020; Zhang, Ge, et al., 2021; Zhang, Wu, Li, & Li, 2021) . There is evidence that various resumption strategies might have different potential to control the outbreaks amid society reopening . Researchers are also focusing on the assessments of the regional resumptions of work, production, and social life (Shao, Tang, Huang, & Li, 2021; Tao, Fan, Gu, & Chen, 2020; Xu, Wang, Dong, Shen, & Xu, 2020) . Satellite remote sensing data, such as daily night-time light (NTL) images, help evaluate the COVID-19 impact on human activities (Liu, Sha, et al., 2020) and monitor the spatiotemporal variation of regional work resumption (Shao et al., 2021) . Satellite observations are of obvious advantage in assessing work resumption in largescale areas . Nevertheless, these assessments were still limited in resolution and accuracy. The location-based service (LBS) data of mobile devices with high-resolution spatiotemporal information can indicate explicit trajectories of human movement and help explore the spatiotemporal COVID-19 epidemic spread associated with population flow (Hu, Qiu, et al., 2020; Hu et al., 2021) . The LBS data from specific locations (e.g., hospitals) provide a possible way to assess work resumption for a specific industry in a high-resolution space-time domain. In view of the above considerations, using the LBS requesting data of mobile devices, this study analyzed work resumption in the hospitals of mainland China from February 21 to March 18, 2020. We further evaluated the influences of fundamental medical-service capacity, human movement, and epidemic severity on work resumption in the hospitals using geographically weighted regression models. A better understanding of how these determinants influence work resumption in hospitals is important, and can introduce helpful information for other countries to implement strategies of work recovery during the post-epidemic phase. This study provides a novel insight into the assessment of work resumption in hospitals and its determinants during the COVID-19 epidemic. We concentrated on assessing the resumption of work in 22,098 general or specialized hospitals during the COVID-19 epidemic in mainland China. The number of medical visits can indicate the capacity of medical service provided by hospitals to a great extent. The comparative analysis of medical visits before and during the epidemic can help examine work resumption in hospitals. We compared the medical-service situations of hospitals during the COVID-19 epidemic with their fundamental capacities before the epidemic and subsequently assessed the work resumption of hospitals and its corresponding determinants. Here, a resumption rate was defined in a spacetime domain to indicate the spatiotemporal resumption situations of hospitals, calculated as follows: where y s,t is the resumption rate of a specific hospital s at a given date t, v s,t denotes the corresponding daily medical visits, and v s,0 is the average of daily visits of hospital s during December 2019. Note that v s,0 is a geographical variable which indicates the spatial distribution of the fundamental capacity of medical service provided by hospitals nationwide and v s,t indicates the spatiotemporal distribution of the visits of hospitals during the COVID-19 epidemic. Thus, the resumption rates of hospitals varied over space and time, and reflected the stronger and weaker situations of medical service with the estimates of y s,t > 1 and y s,t < 1, respectively. We used the data of LBS requests of mobile devices to indicate the visits of hospitals in a space-time domain. The LBS data used in this study cover over 80% of mobile devices supported by the three telecommunications operators in China. They were provided by Wayz Inc., Shanghai, China and had been used to identify the generation of early-phase COVID-19 epidemic spread in China (Hu, Qiu, et al., 2020) . Private individual information was deleted from the raw data of the mobile devices and the LBS data are implemented every 2 h with high-resolution locations. The raw LBS requesting data indicate the individual trajectories of numerous mobile devices with highresolution spatiotemporal information. The trajectory data used in this study were aggregated into individual hospitals by Wayz Inc. with a timestep of 1 day (i.e., medical visits were generated according to hospital and date). The daily visits of mobile devices to hospitals were collected within two periods. The devices which activated their LBS requests in hospitals during December 2019 indicated the average number of daily visits in hospitals before the COVID-19 epidemic and the fundamental capacity of medical service provided by hospitals. On the other hand, we generated the daily visits in hospitals from February 21 to March 18, 2020, which were considered to indicate the medical-service situations of hospitals during the COVID-19 epidemic. The observations of hospital resumption rate (i.e., the explained variable) were expected to be representative of work resumption in hospitals nationwide. Hospitals with resumption rates larger than one at a certain date during the epidemic had more daily visits than those prior to the epidemic, and were considered to have resumed their normal activities. Hospital resumption rates in mainland China were calculated from February 21 to March 18, 2020, and their daily geographical distributions dynamically show the corresponding work resumption in hospitals during the epidemic (Figure 1 ). The spatiotemporal distributions of resumption rates in hospitals were considered to be affected by various potential factors. We selected three categories of explanatory variables to evaluate their influences on hospital resumption rate, including fundamental medical-service capacity, human movement, and epidemic severity. As shown in Table 1 , the average of daily visits in hospitals before the epidemic, v s,0 , was considered the proxy variable of fundamental medical-service capacity, and two proxy variables were selected to indicate inter-city human movement, including daily imported visits from Wuhan, d (w) s,t , and from elsewhere excluding Wuhan, d (e) s,t , respectively. Based on the datasets of LBS requests, we collected the data of daily imported visits from Wuhan and elsewhere, which were associated with the dataset of daily hospital visits according to date and location (Table 1) . Epidemic severity was also considered to have a potential impact on the work resumption of hospitals. Based on various official and publicly available sources (e.g., the daily bulletins of the National Health Commission of the People's Republic of China [NHC] and Provincial/Municipal Health Commissions), we collected the spatiotemporal data of daily new COVID-19 confirmed cases. The epidemic dataset was verified comparatively through the public platform of the 2019-nCoV-infected pneumonia epidemic from the Chinese Center for Disease Control and Prevention (China CDC, 2021) . In addition, the data of daily new confirmed cases were associated with hospitals through individual location information and we consequently collected the data of daily new confirmed cases within multiple buffers around hospitals (Table 1) , which also had a consistent date period with other datasets (from February 21 to March 18, 2020). The daily new confirmed cases within 1, 2, and 3 km of hospitals were considered the proxy variables of epidemic severity, respectively. However, these three variables represented redundant information and exhibited high collinearity based on the variance inflation factors (VIFs) reported in relation to them. Thus, we finally selected the daily new confirmed cases within 3 km of hospitals, c (3) s,t , as the proxy variable of epidemic severity. These explained and explanatory variables have a certain degree of disparity in magnitude and were therefore log-transformed. The logged forms of the variables were standardized to have mean 0 and variance 1. This standardization also makes the parameter estimates of subsequent regressive modeling easy to compare with each other. In order to examine the associations between hospital resumption rate and its determinants, based on the selected explanatory variables and their datasets, a global ordinary least squares (OLS) linear regression model can first be applied. Note that the data of the resumption rate of hospitals were geographically generated at each given date. Thus, the daily OLS model can be implemented and formulated as: where s and t denote a hospital and a date, respectively, y s,t is the resumption rate of hospital s at date t, β 0,t is the intercept constant, x i,s,t denotes the ith explanatory variable, β i,t is the corresponding regression coefficient to be estimated, and ε s,t indicates the estimation error. There could be some degree of positive spatial autocorrelation (SAC) appearing in the observations of the explained variable, which can be measured by the global Moran's I statistic (Moran, 1950) . Moreover, potential local variations always appear in the spatial relationships between explained and explanatory variables, and global regression models (e.g., OLS) normally ignore the spatial non-stationarity. As a typical local multivariate regression model, the geographically weighted regression (GWR) extends global regression modeling by allowing both local and global parameters to be estimated, and can be applied to measure the spatially varying relationships between variables (Brunsdon, Fotheringham, & Charlton, 1996; Fotheringham, Charlton, & Brunsdon, 1998) . Similarly, the daily GWR model used in this study is given by: where x i,s,t is the ith local explanatory variable describing local variation, and the local intercept, (s) 0,t , and the local regression coefficients, (s) i,t , both vary with location of hospitals. The location-specific parameter estimates allow the relationships between the explained variable and explanatory variables to vary between hospitals. The GWR model can describe the spatial local heterogeneity in relationships between the explained variable and the explanatory variables. Nevertheless, the bandwidth parameter in the GWR model is identical for all explanatory variables. That is to say, all explanatory variables exhibit the spatial local heterogeneity at a consistent spatial scale. In fact, the explanatory variables, such as human movement and epidemic severity, might have different determinant powers for the work resumption of hospitals at various spatial scales. Multiscale geographically weighted regression (MGWR) removes the assumption of consistent spatial scale in GWR and allows that the explanatory variables have various specific bandwidths to represent spatial local heterogeneity at various spatial scales (Fotheringham, Yang, & Kang, 2017) . The MGWR technique has been applied extensively to examine the multiscale influences of the determinants on health, socioeconomics, and natural environment (Cupido, Fotheringham, & Jevtic, 2020; Fotheringham, Yue, & Li, 2019; Hong & Yoo, 2020; Iyanda et al., 2020; Mollalo, Vahedi, & Rivera, 2020; Oshan, Smith, & Fotheringham, 2020; Yang, Zhan, Lv, & Liu, 2019) . In this study, we further examined the determinants of the hospital resumption rate at various spatial scales using the MGWR model described as follows: bwi,t are the local intercepts and regression coefficients of explanatory variables with various optimal bandwidths, respectively, and bwi in (s) bwi,t denotes the specific bandwidth used for calibration of the ith conditional relationship. Note that the coefficients in MGWR also vary with the location of hospitals. The experimental period was set from February 21 to March 18, 2020. We applied a consistent parameter setting to solve the above GWR and MGWR models at each date during the study period. A commonly used adaptive bi-square kernel function, which removes the influence of observations outside the neighborhood specified by the number of individuals, was used as the distance-weighting function to represent the relative importance between locations. The bandwidth (optimal number of nearest neighbors, i.e., individual hospitals) was determined through an iterative optimization process in GWR by minimizing the corrected Akaike information criterion (AICc). The significance of the estimated coefficients was checked with pseudo t tests and the model significance was tested by variance analysis (F tests). More specifically, the calibration in MGWR was implemented using a back-fitting algorithm and the iterative process is initialized with the GWR parameter estimates (Fotheringham et al., 2017) . The local parameter estimates and optimized bandwidths are evaluated during each iteration. When the difference of the parameter estimates between sequential iterations reaches a given convergence threshold bwi,t logx i,s,t + s,t (1e−5 in this study), the iteration terminates. The MGWR2.2 software (https://sgsup.asu.edu/sparc/ mgwr) was applied to implement the GWR and MGWR computations (Oshan, Li, Kang, Wolf, & Fotheringham, 2019) . The The OLS, GWR, and MGWR models were implemented to examine the associations between hospital resumption rate and its determinants, respectively. The daily OLS results achieved an average adjusted R 2 value of 0.3320 (SD = 0.1382) and global OLS had poor performance in assessing the determinant power of explanatory variables on hospital resumption rate. As shown in Figure 3b , the spatial autocorrelation was weak before March 8 and OLS exhibited a relatively acceptable performance (R 2 > 0.4). However, the performance declined sharply when the F I G U R E 3 Temporal Moran's I statistics of the hospital resumption rate distributions (a) and temporal adjusted R 2 values of the OLS, GWR, and MGWR models (b) spatial autocorrelation became stronger after that date. The adjusted R 2 value of the OLS result decreased to less than 0.1 until the experiment end date. The spatially varying relationships between explained and explanatory variables are considered in the GWR/ MGWR technique, and thus it usually outperforms the OLS model, which assumes the relationships are globally identical. (Table 2) . During the early phase (before March 8), the population imports contributed to the medical visits in hospitals to some extent and the corresponding influence on resumption rate exhibited strong spatial heterogeneity. Therefore, GWR/MGWR obviously improved the performance compared to OLS, with the R 2 values increasing from 0.3-0.5 to 0.7-0.9 (Figure 3b ). Although the determinant powers of the explanatory variables decreased after that date and the performance of the models declined, GWR/MGWR still had a certain degree of performance improvement, with approximately 20% higher R 2 values than those of the OLS model ( Figure 3b) . Furthermore, as shown in Table 2 , MGWR exhibited a slight performance improvement compared to GWR, with an increase of the average adjusted R 2 values from 0.6198 (SD = 0.2439) to 0.6276 (SD = 0.2372). This performance improvement was almost steady within the entire experimental period (Figure 3b ). The temporally average residuals generated by the OLS, GWR, and MGWR models in 22,098 hospitals were applied to calculate their corresponding spatial autocorrelation, respectively. The Moran's I value of the OLS residuals was 0.0089 (p = .4600), and those of the GWR/MGWR residuals were 0.0197 (p = .1214) and 0.0198 (p = .1213), respectively. The residuals from all three models exhibited a consistent random pattern, which means that the residuals had no significant spatial dependency and were randomly distributed in space. However, the GWR/MGWR models both produced fewer residuals than the OLS model and reduced the error variance, in which MGWR introduced a slightly better improvement. Figure 4 further presents the geographical distributions of the residuals and the local R 2 values generated by the MGWR model. The residuals showed a random spatial pattern and no obvious clusters were found in both positive and negative residuals. The local R 2 distribution presented the random spatial pattern as well, and there were no obvious clusters of high or low R 2 values. Besides, the MGWR technique can explain the scale effects of the influence of the determinants on hospital resumption rate. Consequently, we conclude that MGWR can effectively help improve goodness-of-fit performance, eliminate residual dependency, reduce error variance, and eventually was selected to assess work resumption in hospitals during the COVID-19 epidemic in China. The parameter estimates generated by the MGWR model are summarized in with stronger fundamental medical-service capacities found it harder to rapidly resume their work situations. Human movement had a strongly positive impact on the resumption of work in hospitals. The local parameter estimates from daily imported visits from Wuhan, d (w) s,t and from elsewhere, d (e) s,t were significant for 91.05 and 99.30% of space-time points, of which 98.57 and 100% were positive, respectively. The latter estimates had an average of 0.5694, which was higher than that of the former. Inter-city population flow considerably influenced work resumption in hospitals, and increasing human imports introduced higher resumption rates. The local parameter estimates from daily new confirmed cases within 3 km of hospitals, c (3) s,t were significant for 98.40% of space-time points, of which 100% were negative. The parameter estimates had an average of −0.0573, which was much lower than those from other exploratory variables. The surrounding epidemic severity had a weakly negative impact on the resumption of work in hospitals. Due to the variable standardization before modeling, the local parameter estimates can relatively represent the influence of exploratory variables on hospital resumption rate across the entire area. Figure 5 provides geographical distributions of the temporal averages of the MGWR parameter estimates. Note that the parameter estimates in hospitals were aggregated into the corresponding administrative cities for an acceptable visualization of thematic mapping. Consequently, the positive/negative influence of the determinants might be exaggerated in several regions with rare hospitals, due to the aggregation process. In general, human importations were the positive determinants of hospital resumption rate and medical-service capacity was the negative one. The resumption of work in hospitals during the post-epidemic phase was closely related to virus testing, quarantine, and protective isolation. The local parameter estimates for the intercept were slightly positive across the entire area, ranging from −0.04 to 0.11 (Figure 5a) , whereas the parameter estimates of v s,0 in Figure 5b were significantly negative, ranging from −0.48 to −0.21. The negative influence of the medical-service capacity on hospital resumption rate was concentrated on several economically developed areas, such as the Yangtze and Pearl river deltas. Figures 5c and d reveal the distributions of the local parameter estimates of d (w) s,t and d (e) s,t , respectively. They were significantly positive across nearly the entire area, ranging from 0.23 to 1.26 and from 0.42 to 0.84, respectively. The population imports from Wuhan still played a more important role in hospital resumption rate than that from elsewhere during the post-epidemic phase. These positive influences presented a relatively low-value clustering characteristic, primarily in eastern coastal areas, whereas no obvious clusters were found in other areas. The local parameter estimates of c (3) s,t in Figure 5e were weakly negative, ranging from −0.08 to −0.03. The epidemic severity indicated no obvious regional variation of the negative influence on hospital resumption rate across the entire area. The optimized bandwidths generated by the GWR and MGWR models are listed in Table 4 s,t had a temporal average of 12,872 nearest neighbors (SD = 4528), suggesting that the epidemic severity affected hospital resumption rate at a very global scale (i.e., it had a similar influence on the resumption rate in all hospitals, or the influence exhibited extremely weak spatial heterogeneity). The resumption of work and production is the main focus during the COVID-19 post-epidemic phase in China and other countries. High-resolution LBS requesting data of mobile devices contain substantial spatiotemporal information associated with population flow and specific locations, and therefore provide the potential to assess work resumption and the corresponding determinants in a high-resolution space-time domain. In this study, based on the LBS request data aggregated in hospitals, we explicitly analyzed work resumption in 22,098 Chinese hospitals from February 21 to March 18, 2020. The MGWR technique was further used to evaluate the determinants of hospital resumption rate, as well as their various spatial scale effects. This study concentrated on the assessment of work resumption in hospitals, which is explicitly targeted at the work resumption of a specific industry instead of the overall resumption of work and production in a study area. The LBS request datasets used in this study cover the majority of mobile devices in mainland China, and are obviously advantageous, with high spatiotemporal resolution on a very large scale. The assessment of the resumption of work and production can be implemented in a specific industry with high-resolution spatiotemporal information. A novel insight has been provided into the assessment of work resumption during the post-epidemic phase. Another main contribution of the current study is the quantitative evaluation of the determinants of the hospital resumption rate and their multiscale influences, including medical-service capacity, human movement, and epidemic severity. Previous studies have applied the MGWR technique to explore the determinants of health effects, such as obesity rate , mortality rate (Cupido et al., 2020) , incidence rate (Mollalo et al., 2020) , and confirmed cases (Iyanda et al., 2020) . To our knowledge, this study is the first application of the MGWR technique to examine the multiscale influences of the determinants on the resumption of work and production. Population imports were found to be the positive determinants of hospital resumption rate, whereas medical-service capacity and epidemic severity had negative influences. However, their positive/negative influences exhibited different spatial scale effects. The medical-service capacity negatively affected hospital resumption rate at a local scale, whereas the epidemic severity had the influence at a very global scale. Population imports from elsewhere affected the hospital resumption rate at a very local scale, whereas the imports from Wuhan affected it at a relatively global scale. MGWR has been considered a significant improvement on GWR since it allows variable-specific bandwidths (Fotheringham et al., 2017) . The MGWR software makes it easy to implement the computation and extensive applications (Oshan et al., 2019) . Although several theoretical improvements have been implemented to optimize the MGWR framework, such as parallel computational improvements to the calibration , bandwidth uncertainty measurement , and inference of local parameter estimates , there were still several issues appearing in MGWR computations. For instance, the datasets in this study included the observations in 22,098 hospitals and the MGWR computation was extremely time-consuming. MGWR is currently calibrated using a back-fitting algorithm and it is hard to achieve a tolerable run time with moderately large datasets . The bandwidth optimization is related to the calibrating algorithm and the chosen criterion, and is subject to uncertainty (Li, Guan, et al., 2020) . That is to say, for the optimized bandwidths in the MGWR model, it is hard to indicate the strictly "best" ones. This also causes a probable limitation on the improvement of model performance, such as the less satisfactory goodness-of-fit indicators of MGWR compared to GWR . In this study, the daily MGWR model provided a better goodness-of-fit performance than GWR model at most dates. Nevertheless, the GWR model still achieved slightly higher R 2 values than the MGWR model at several dates ( Figure 3b ). This may be caused by overfitting to the data in GWR, or calibrating algorithm and bandwidth uncertainty in MGWR. This study has several limitations and has identified several further analyses in future work. First, the study date period was set from February 21 to March 18, 2020, which did not cover all of the various phases of the epidemic. Only four explanatory variables were selected to examine their influence on work resumption in hospitals. Long-term assessment of the resumption of work and production is required in future work, as well as introducing more potential explanatory variables. Moreover, the multiscale influences of the determinants on work resumption in hospitals were examined in this study, and more potential information could be introduced if the objective unit is changed (e.g., the assessment of medical-service resumption in prefecture-level cities). In addition, the assessment of work resumption of other industries can be implemented using similar techniques and datasets, which is one of our ongoing works. Finally, our study assessing work resumption in hospitals has considered just spatial non-stationarity and spatial autocorrelation during daily modeling; spatiotemporal modeling requires further consideration of temporal/spatiotemporal autocorrelations, which can be a theoretical optimization work in the future. In conclusion, this article provided a novel insight into the assessment of work resumption based on the LBS request data of mobile devices, and then presented an experimental application of the MGWR technique to characterize the multiscale influences of the determinants on the hospital resumption rate. The results show that: (1) nearly half of the 22,098 hospitals had resumed their medical-service situations after fighting the epidemic for 2-3 months; (2) most hospitals with low resumption rates were spatially clustered, whereas those with high values exhibited no significant clustering characteristic; (3) population imports had a strongly positive impact on the resumption of work in hospitals, whereas the imports from Wuhan and elsewhere affected the resumption rate at a relatively global scale and at a very local scale, respectively; (4) the fundamental medical-service capacity was the primary negative determinant of hospital resumption rate, affecting at a local scale; (5) the epidemic severity had a weakly negative impact on hospital resumption rate at a very global scale. This study was supported by the National Natural Science Foundation of China (Grants No. 42061075, 41961055) , the Science and Technology Major Project of Jiangxi Province, China (Grants No. 20201BBG71010, 2020YBBGW0007) , and the Science and Technology Major Project of Jiangxi Provincial Office of Education, China (Grant No. GJJ200303) . The funders had no role in the study design, data collection and analysis, decision to publish, or preparation of the manuscript. The authors declare no competing interests. https://orcid.org/0000-0003-3875-8792 Evaluation of work resumption strategies after COVID-19 reopening in the Chinese city of Shenzhen: A mathematical modeling study Geographically weighted regression: A method for exploring spatial nonstationarity Public platform of the 2019-nCov-infected pneumonia epidemic The effect of travel restrictions on the spread of the 2019 novel coronavirus (COVID-19) outbreak Local modelling of U.S. mortality rates: A multiscale geographically weighted regression approach. Population, Space and Place Geographically weighted regression: A natural evolution of the expansion method for spatial data analysis Multiscale geographically weighted regression (MGWR) Examining the influences of air quality in China's cities using multi-scale geographically weighted regression Effect of different resumption strategies to flatten the potential COVID-19 outbreaks amid society reopens: A modeling study in China First case of 2019 novel coronavirus in the United States Analyzing spatial variance of Airbnb pricing determinants using multiscale GWR approach Modeling the complete spatiotemporal spread of the COVID-19 epidemic in mainland China First, second and potential third generation spreads of the COVID-19 epidemic in mainland China: An early exploratory study incorporating location-based service data of mobile devices The risk of COVID-19 transmission in train passengers: An epidemiological and modelling study A retrospective crossnational examination of COVID-19 outbreak in 175 countries: A multiscale geographically weighted regression analysis Potential association between COVID-19 mortality and health-care resource availability. The Lancet Global Health Population flow drives spatio-temporal distribution of COVID-19 in China The effect of human mobility and control measures on the COVID-19 epidemic in China Early transmission dynamics in Wuhan, China, of novel coronavirus-infected pneumonia Computational improvements to multi-scale geographically weighted regression Measuring bandwidth uncertainty in multiscale geographically weighted regression using Akaike weights Impact of meteorological factors on the COVID-19 transmission: A multi-city study in China Spatiotemporal patterns of COVID-19 impact on human activities and environment in mainland China using nighttime light and air quality data Contact settings and risk for transmission in 3410 close contacts of patients with COVID-19 in Guangzhou, China: A prospective cohort study GIS-based spatial modeling of COVID-19 incidence rate in the continental United States Notes on continuous stochastic phenomena Spatially explicit models for exploring COVID-19 lockdown strategies mgwr: A Python implementation of multiscale geographically weighted regression for investigating process spatial heterogeneity and scale Targeting the spatial context of obesity determinants via multiscale geographically weighted regression Transmission of 2019-nCoV infection from an asymptomatic contact in Germany Global assessment of environment, health and economic impact of the novel coronavirus (COVID-19). Environment, Development and Sustainability Monitoring work resumption of Wuhan in the COVID-19 epidemic using daily nighttime light. Photogrammetric Engineering & Remote Sensing Satellite observations of the return-to-work over China during the period of COVID-19 An investigation of transmission control measures during the first 50 days of the COVID-19 epidemic in China A novel coronavirus outbreak of global health concern When will be the resumption of work in Wuhan and its surrounding areas during COVID-19 epidemic? A data-driven network modeling analysis state ment-on-the-secon d-meeti ng-of-the-inter natio nal-healt h-regul ation s-(2005)-emerg ency-commi tteeregar ding-the-outbr eak-of-novel Nowcasting and forecasting the potential domestic and international spread of the 2019-nCoV outbreak originating in Wuhan, China: A modelling study Possible environmental effects on the spread of COVID-19 in China China's practice to prevent and control COVID-19 in the context of large population movement An analysis of the domestic resumption of social production and life under the COVID-19 epidemic Downscaling land surface temperature using multiscale geographically weighted regression over heterogeneous landscapes in Wuhan, China Inference in multiscale geographically weighted regression Epidemic prevention during work resumption: A case study of one Chinese company's experience. Frontiers in Public Health Risk assessment of the step-by-step return-to-work policy in Beijing following the COVID-19 epidemic peak Effects of human mobility restrictions on the spread of COVID-19 in Shenzhen, China: A modelling study using mobile phone data. The Lancet Digital Health Assessing work resumption in hospitals during the COVID-19 epidemic in China using multiscale geographically weighted regression