key: cord-0732342-i65qpjqr
authors: Bui, Le Minh; Thi Thu Phung, Huong; Ho Thi, Thuy-Tien; Singh, Vijai; Maurya, Rupesh; Khambhati, Khushal; Wu, Chia-Ching; Uddin, Md Jamal; Trung, Do Minh; Chu, Dinh Toi
title: Recent findings and applications of biomedical engineering for COVID-19 diagnosis: a critical review
date: 2021-10-18
journal: Bioengineered
DOI: 10.1080/21655979.2021.1987821
sha: a76e4a83ca1b5ab591142024b28f65086d25dada
doc_id: 732342
cord_uid: i65qpjqr

COVID-19 is one of the most severe global health crises that humanity has ever faced. Researchers have restlessly focused on developing solutions for monitoring and tracing the viral culprit, SARS-CoV-2, as vital steps to break the chain of infection. Even though biomedical engineering (BME) is considered a rising field of medical sciences, it has demonstrated its pivotal role in nurturing the maturation of COVID-19 diagnostic technologies. Within a very short period of time, BME research applied to COVID-19 diagnosis has advanced with ever-increasing knowledge and inventions, especially in adapting available virus detection technologies into clinical practice and exploiting the power of interdisciplinary research to design novel diagnostic tools or improve the detection efficiency. To assist the development of BME in COVID-19 diagnosis, this review highlights the most recent diagnostic approaches and evaluates the potential of each research direction in the context of the pandemic.

In December 2019, a novel coronavirus causing a severe pneumonia disease was first detected in patients in Wuhan, China and expeditiously spread throughout the world soon after. In March 2020, the World Health Organization (WHO) declared the coronavirus disease 2019 outbreak caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV -2) as a global pandemic. Within 19 months, SARS-CoV-2 has been transmitted to almost all countries in the world and has infected more than 203 million people as of August 10 th , 2021. The disease has been responsible for over 4 million deaths worldwide [1] . The pandemic has reduced global economic growth from −4.5 to −6.0% in 2020, with a partial recovery of 2.5% to 5.2% projected for 2021. Global trade is estimated to have fallen by 5.3% in 2020, but is projected to grow by 8.0% in 2021 [2] . COVID-19 is highly contagious and tends to easily transmit among close contacts via exposure to infectious respiratory fluids including very fine respiratory droplets and aerosol particles produced from breath, coughs, and sneezes. The extremely high transmission rate of COVID-19 has posed a high risk to the community and put enormous pressure on healthcare systems [3, 4] .

COVID-19 symptoms are typically high fever, dry cough, sore throat, and difficulty breathing that appear within 2-14 days after the incubation period and it may overlap with influenza or common cold. A pressing need has arisen to rapidly and accurately identify virus carriers to protect the public's health [5] . Diagnostics play a central role in the containment of COVID-19, as it allows for identification, isolation, and contact tracing of the virus carriers, as well as rapid implementation of measures to stop the spreading of virus [6] [7] [8] [9] [10] . Easily missed by conventional symptom screening, however, asymptomatic people may become major virus spreaders [11] . Therefore, highly sensitive and specific SARS-CoV-2 detection methods have always been great demand [12, 13] .

In 2020, the global market for COVID-19 diagnostic services was valued at $60.3 billion and in 2021 it was predicted to reach $84.4 billion and $195.1 billion by 2027 [14] . There are various methods for detecting COVID-19, including immunoassays, protein assays, viral plaque assays, hemagglutination assays, viral flow cytometry, etc [15] [16] [17] [18] . Conventionally, the majority of pathogen diagnostics have been developed for laboratorybased detection, including immunoassay-based and reverse transcriptase-polymerase chain reaction (RT-PCR)-based methods [19] . However, the time-consuming conventional diagnostic procedures were soon overwhelmed by the unmatched rate of infection and hospitalization. Therefore, more and more point-of-care testing (POCT) and rapid methods have been exploited for supporting the medical decision-making process or self-health monitoring, including isothermal nucleic acid amplification technique (iNAAT) [20] , clustered regularly interspaced short palindromic repeats (CRISPR)-based methods [21] [22] [23] , biosensors, and microfluidic devices [24] . Automated artificial intelligence models have also been proposed to facilitate high-throughput and consistent diagnosis. These technologies have been developed rapidly while the pandemic is going on. Here, we highlight the most recent progress of these biomedical engineering (BME) technologies applied to COVID-19 diagnosis in this review, as well as provide insights into how the research direction in this field has shifted in response to practical demands for disease surveillance and personal healthcare.

SARS-CoV-2 infection stimulates the humoral immune system to produce specific antibodies, including immunoglobulin A, M, and G (IgA, IgM, IgG) [25] [26] [27] that appear in patient blood by specific kinetics. This information has guided the development of immunoassays, which are mainly enzyme-linked immunosorbent assay (ELISA) and chemiluminescent immunoassay (CLIA), for SARS-CoV-2 detection, tracing, and seroprevalence studies ( Figure 1 ).

ELISA was commonly used at the early stage of the pandemic as a qualitative or semi-quantitative method to detect humoral anti-SARS-CoV-2 immunoglobulins or virus antigens. It uses an immobilized SARS-CoV-2 antigen (Ag) to capture its cognate humoral antibody (Ab). The Ag-Ab binding is usually detected by a secondary Ab that was labeled with an enzyme (normally horseradish peroxidase, HRP) to catalyze a color change reaction. The titer of host immunoglobulins or virus antigens can be determined (indirect ELISA Figure 1 . General COVID-19 diagnostic workflow using molecular testing (NAAT, iNAAT and immunoassay-based detection). (1) Sample collection methods; (2) Types of samples; (3) Sample processing or pre-treatment; (4) Test reaction and result reading. The methods illustrated are the most commonly used for COVID-19 diagnosis and the alternatives in each step are mostly interchangeable, except that blood samples are not used for NAAT and iNAAT techniques, and extracted RNA is not used for immunoassay detection. The image was created with BioRender.com. and direct ELISA, respectively) by measuring the colorimetric changes on a microplate reader. Among the initial attempts, Amanat et al. used purified recombinant S protein (with modifications) and its receptor-binding domain (RBD) to develop an indirect ELISA to detect IgM and IgG in serum, revealing the strongest binding reactivity for the full-length S protein and the correlation between ELISA titers and virus neutralization [28] . Peterhoff et al. developed an ELISA using SARS-CoV-2 RBD as the antibody-catching Ag to achieve high specificity (92-98%) and high specificity (99.3%) for IgA, IgG, and IgM in the serum at > 10 days after PCR positive [29] . RBD ELISA for testing IgG was found to be sufficient for COVID-19 diagnosis with high sensitivity and specificity (88% and 98%, respectively) [30] . Since IgM positive predictive value (PPV) was insufficient, IgA specificity was low, and their presence in the blood was short-lived [31] [32] [33] , both IgM and IgA are not reliable markers for ELISA. However, combined detection of IgA/IgM/IgG was suggested as the most sensitive assay to detect SARS-CoV-2 31. Interestingly, Kyosei et al. proposed a de novo system for SARS-CoV-2 antigen detection by coupling a spike protein (S1)detecting sandwich ELISA system with thionicotinamide adenine dinucleotide (thio-NAD) cycling. By adding 10 min of thio-NAD cycling to the ELISA procedure and measuring S1 concentration using a plate reader at OD 405 , high sensitivity of 10 4 viruses per reaction can be achieved [34] .

ELISA can be used in low-cost settings. It is easy to perform and automated, but it is time consuming process (2-5 h) and it can be easily contaminated. That makes another alternative, CLIA, more suitable when a faster turn-around time (1-2 h) is required. Similar to ELISA, but instead of using an enzyme, CLIA uses a luminophore to conjugate the secondary Ab, so that the specific Ag-Ab binding will trigger a light or fluorescent emission. A few studies found that ELISA sensitivity is similar or slightly better than that of CLIA in detecting humoral Ag or viral Ab [35, 36] . Ma et al. used highly purified RBD to make a set of CLIA kits for detecting RBD-specific IgA/IgM/IgG, reaching 96.8-98.6% sensitivity and 92.3-99.8% specificity, also combined the IgA/IgG detection kits to boost the sensitivity and specificity to 99.1% and 100%, respectively [37] . For both ELISA and CLIA, automated, high-throughput detection systems, such as Diazyme DZ-Lite 3000 Plus (Diazyme Laboratories, USA) [38] , or MAGLUMI CLIA (Snibe, China) [39] have demonstrated high sensitivity, specificity, and the capacity to process multiple samples simultaneously. It is noteworthy that a wide variety of performance between commercially available ELISA/CLIA kits was found [40] [41] [42] [43] [44] , thus the need of validating the assays before use is very critical. Wu et al. showed that the combination of antibody detection and existing RT-PCR greatly enhanced SARS-CoV-2 detection, from 48.1% (RT-PCR alone) to 72.2% [45] . Based on the process of SARS-CoV-2 infection and the production of specific antibody responses, a diagnostic IgG and IgM laboratory-based immunoassay would be the most effective method for COVID-19 diagnosis.

Even though sharing the same working principle as ELISA, an RDT is formatted into a portable cassette or dipstick to perform the test at POC or home ( Figure 1 ). SARS-CoV-2 RDTs can indirectly detect the virus through humoral antibodies (IgM, IgG, IgA), referred to as Ab-RDTs, or directly detect a surface antigen of the virus, referred to as Ag-RDTs. For convenient result reading, the RDT is engineered as a later flow immunoassay (LFA) device, comprised of a nitrocellulose membrane contained in a plastic housing, immobilized Ab, and labeled Ag/Ab (usually conjugated with colloidal gold). The presence of a target molecule is indicated by a color band that appears on the test line. RDT kits are inexpensive, very simple to use without training or laboratory equipment, and usually have a short time-to-result of 10-15 minutes. Therefore, RDT has become one of the most widely used methods for SARS-CoV-2 detection, especially for POCT screening and personal use. However, their uses in clinical diagnosis are limited to certain circumstances, mostly depending on the stage of disease progress, viral loads, and viral prevalence [46] .

A systematic meta-analysis by Ghaffari et al. on 62 commercially available serological (antibody detecting) test kits (ELISA, CLIA, RDT) revealed a wide range of sensitivity variation (almost 0% to 100%), while most of the kits exhibited >90% specificity [47] . Noticeably, most of the worst performance was from RDT kits. It was also confirmed that these serological kits are effective in later periods of the disease progression [47] . From meta-analysis, Bastos et al. found that the overall sensitivity of serological immunoassays was significantly higher at least 3 weeks from the illness onset (69.9-98.9%) as compared to the results from the first week (13.4-50.3%) [48] . Even though these serological detection kits are not sufficiently sensitive at the early stage of infection, they are important tools to investigate one's past infection [28] and provide information on how the virus spreads in a community [49] .

Ag-RDT kits are designed the same way as Ab-RDT kits, except that the targets are viral surface proteins and the virus is directly detected. Ag-RDT assays were shown to be better screening tools than Ab-RDT kits [50] . However, the performance of commercial Ag-RDT kits can be vastly different [51] [52] [53] . A clinical evaluation of 122 SARS-CoV-2 Ag-RDT kits with the European Conformity (CE) mark reported a wide range of performance variation that 78.7% of the kits exhibited a sensibility >75% on samples with high viral loads, and 19.8% of the kits showed a sensitivity >75% for medium viral loads [54] . With qRT-PCR as the gold standard, Ag-RDT sensitivity was significantly different between the symptomatic (80-96.52%) and asymptomatic group (37-71.43%) [50, 55, 56] , but its positive predictive value (PPV) was higher in agreement with viral cultivability [57] and its sensitivity was only slightly lower than the qRT-PCR as long as the virus isolated from the sample that was cultivable [58] . The sensitivity of an Ag-RDT kit was found to be dramatically reduced from 86.5% to 53.8% after 7 days of illness onset [59] . Since low viral loads (Ct > 30) are linked to low viral culture positivity or infectivity [60, 61] , the proper use of Ag-RDT kits is to detect infectious cases. Nevertheless, for screening mixed symptomatic and asymptomatic groups, serial testing with the minimal 3-day interval of between tests can also increase the sensitivity of Ag-RDT to over 98% [58] . Also, for community screening, the short sample-to-answer time and the repeat testing of Ag-RDTs were demonstrated to be more important than the sensitivity [62] .

NAAT, or specifically, quantitative RT-PCR (qRT-PCR) was among the earliest diagnostic tools developed for the detection of SARS-CoV -2 from the available sequence data shared from China ( Figure 1 ). A few days after the initial SARS-CoV-2 outbreak, a full genomic sequence of the virus isolated from a patient from Wuhan was released and deposited on GenBank (accession number MN908947.3). It was the first genomic data for the design of primers for qRT-PCR by researchers from China, France, the USA, Japan, Germany, Hong Kong, and Thailand. These protocols were later compiled and made available online through WHO [63] . In order to facilitate the rapid sharing of SARS-CoV-2 sequences, a data-sharing service hosted by the Global Initiative on Sharing All Influenza Data (GISAID) was introduced (https://www.epicov. org). Numerous efforts have been made by scientists worldwide to optimize qRT-PCR procedures and produce commercial SARS-CoV-2 diagnostic kits to support disease surveillance at hospitals, healthcare centers, and in the community.

As instructed by the protocols published in the WHO guideline, various SARS-CoV-2 genomic targets, including structural genes, N (nucleocapsid), RdRp (RNA polymerase), S (spike protein), E (envelope protein), Orf1ab (replication complex), and a non-structural gene, nsp14 [63] , were used for the amplification. According to Corman et al., qRT-PCR protocols with the E gene or RdRp gene were shown to produce the best results with a limit of detection (LOD) of 3.2 to 5.2 RNA copies per reaction [64] . A comparative study was also reported the high analytical sensitivity of qRT-PCR using Corman E gene and CDC N1 primer-probe sets (LOD = 6 RNA copies per reaction) [65] . However, quickly after the initial outbreak, growing evidence showed that the mutations occurred in the SARS-CoV-2 genome were prone to significantly reducing the sensitivity of available qRT-PCR procedures [66] [67] [68] [69] . Based on 31,421 genomic sequences shared on GISAID as of July 23 rd , 2020, Wang et al. found that virtually all the recommended primer sites have undergone mutations and the N gene primers and probes covered most of the mutated spots [70] . Later evidence of mutations of E and N genes hinted at the escape of the virus from qRT-PCR detections [71] [72] [73] . Interestingly, the most common mutation was found to be cytosine-to-uracil type, which was caused by a strong mRNA editing mechanism catalyzed by apolipoprotein B mRNA-editing enzyme, catalytic polypeptide-like (APOBEC) cytidine deaminase during its involvement in the innate immune host response [74, 75] . These findings emphasized the need of developing more multiplex assays for COVID-19 diagnosis. As the first commercial multiplex qRT-PCR for SARS-CoV-2, QIAstat-SARS, while targeting both E and RdRp genes, achieved a LOD of 1 RNA copy per µl and very high percent agreement (97%) with WHO RT-PCR assay [76] . Moreover, in silico analysis of PCR performance with known virus variants was highly recommended for proper adjustments of the optimal cycle threshold depending on the changes in the amplification curve [77] . When the co-infection of SARS-CoV-2 and influenza viruses has become more frequent and increase the risk of severity and mortality of COVID-19 patients [78] , multiplex qRT-PCR assays for the simultaneous detection of SARS-CoV-2 and influenza A/B also become necessary [79, 80] .

Studies have identified the presence of SARS-CoV-2 in the respiratory tract (sputum, nose, bronchoalveolar lavage fluid (BALF) [81] , nasopharynx and oropharynx [82] , etc.), gastrointestinal tract (stool, anal swab [83] , etc.), even in the retina [84] , olfactory mucosa [85] and brain [86] of COVID-19 patients. However, only a limited number of specimen types can be used for qRT-PCR detection. Based on the studies on qRT-PCR sensitivity and specificity varied in specimen type, nasopharyngeal (NP) swab has widely been used upper respiratory tract specimen, sputum is for the lower respiratory tract sampling [81,, 87,, 88] , while oropharyngeal (OP) swab was not recommended due to its lower positive rate. However, the disadvantage of using NP swabs is the discomfort of the testes and the risk of complications, such as broken swabs or nasal bleeding [89] . Alternatively, a combined nasal/OP swab can be used to provide excellent sensitivity while releasing the stress of NP swab shortages [90] . Later recognized, but with the high sensitivity and specificity of saliva-based qRT-PCR (84.2-95.2% and 98.9%, respectively), saliva has become an appealing noninvasive alternative to NP swabs because it is easy and painless for self-sampling, child-friendly, and safer for healthcare workers [91] [92] [93] [94] [95] . It was even proposed as the gold-standard sample for COVID-19 diagnosis [96] and it was shown practically to perform similarly to NP swab-based RT-PCR [97] .

Even though qRT-PCR is usually considered the gold standard for COVID-19 diagnosis, it has shown several critical limitations in practice as the results of some pre-analytical and analytical vulnerabilities, including erroneous sampling, low assay accuracy, unaware mutations, lack of understanding of viral load kinetics [98, 99] . In early reports, the immature development of NAAT technology for SARS-CoV-2 detection can be blamed for the moderate clinical sensitivity of qRT-PCR assays (71-82.2%) [100] [101] [102] [103] . However, after more than a year of intensive development and optimization, the clinical performance of qRT-PCR has not been markedly improved [104] , especially for screening in population-based and hospital settings [105, 106] .

Modifications to the qRT-PCR procedure have been proposed and demonstrated to improve the overall capacity, reduce turn-around time, cost, or adapt the system to POCT settings, such as employing patient-collected swabs and saline gargles [107] or saliva [108,, 109] , unextracted clinical samples [110] [111] [112] [113] [114] , or portable miniature PCR workstations [115] [116] [117] . Noticeably, a novel approach to PCR, namely viability RT-qPCR, employed platinum chloride to treat NP swab samples and prevent the amplification of SARS-CoV-2 RNA in free form or from virions with damaged capsids, thus detecting the only RNA associated with intact virions, indicating infectivity [118] . This method is a suitable tool to ascertain one's infectiousness without the need to perform virus culture, avoid false positives caused by contaminated RNA from the environment and identify noninfectious, prolonged RNA shedding from patients.

Strategy-wise, pooling or group testing was also suggested as an attractive low-cost tactic to screen a large population with low virus prevalence, preserving 69-93% of the cost without reducing the detection efficiency [119, 120] . Alternatively, serial testing has been demonstrated to be effective in improving the clinical sensitivity of qRT-PCR to above 90% [58, 100, 103] . The remaining challenge to qRT-PCR is the limited capacity to precisely process a large number of samples simultaneously [98] . While automated, high-throughput qRT-PCR systems such as cobas 6800/8800 (Roche Molecular Systems, USA) [121] , Alinity m2000 (Abbott Molecular, USA) [122] , GeneXpert Xpress (Cepheid, USA) [123] , etc., can partly resolve the analytical and capacity problem [124] , they cannot help reduce human-related errors in pre-analytical steps [98] . Also, most of these systems either require high investment or have lowthroughput capacity. Therefore, further improvements are still needed to adapt PCR to the pandemic circumstances.

iNAATs are alternatives to conventional PCR and are usually designed for POCT diagnosis, in which the nucleic acid amplification is performed at a constant temperature by avoiding thermal denaturing of the double-strand DNA (dsDNA) template ( Figure 1 ). Among the iNAAT methods, loop-mediated isothermal amplification (LAMP), developed by Notomi et al. (2000) [125] , has been the most frequently used one. This method utilizes a DNA polymerase with strand displacement activity (usually Bst DNA polymerase) and 4-6 primers that recognize 6-8 distinct regions on the target DNA sequence. The whole process requires only incubation at 60-65°C for less than 1 hour, producing 10 9 copies of a target sequence. Amplified products can be conveniently visualized with various dyes, such as phenol red, hydroxy naphthol blue, leuco crystal violet (LCV), SyBr Green, or by coupling the reaction with an LFA strip. The addition of reverse transcriptase to the LAMP assay (RT-LAMP) allowed for the detection of viral RNA at LOD of 5-10 copies per reaction, even without RNA extraction [126] . Most reports achieved the clinical sensitivity and specificity of RT-LAMP within 75-100% and 98.7-100%, respectively, while the LOD ranged from 1 to 304 copies per reaction [127] [128] [129] [130] [131] [132] [133] [134] . Another advantage that makes LAMP fit for POCT is the use of lyophilized reagents without sacrificing quality [135] , which expands the kit shelf-life to years at 4°C or several weeks at room temperature [136, 137] . Nevertheless, LAMP performance is heavily dependent on its custom design and might not yet be comparable to qRT-PCR in some cases, as it was reported to be reliable up to the viral load equivalent of Ct (cycle threshold) < 30 [131] , which was in line with the observations from other groups [138, 139] .

Another iNAAT option for SARS-CoV-2 diagnosis is recombinase polymerase amplification (RPA), which was invented by Piepenburg et al. [140] . In this method, Bsu DNA polymerase I (large fragment) is used to extend the 3 termini of two oligonucleotides (primers). The strand hybridization of primer-ssDNA is mediated by a recombinase (T4 uvsX) and other proteins (T4 gp32, T4 uvsY). RPA normally operates at 37-42°C and takes only 10 minutes to complete the amplification. The fast process, the smaller number of primers required, the low working temperature, and the versatility of targeting multiple sequences simultaneously have made RPA an excellent alternative to PCR and LAMP. Based on RT-RPA, Xia et al. introduced an one-pot, 30-min WEPEAR (whole-course encapsulated procedure for exponential amplification from RNA) procedure for simultaneously detecting N and S genes of SARS-CoV-2 at the LOD of 1 RNA copy per reaction [141] . A clinical evaluation of RT-RPA for SARS-CoV-2 detection showed the sensitivity, specificity, and LOD of 98%, 100%, and 7.7 RNA copies/µl, respectively, which was comparable to qRT-PCR (5 copies/µl) [142] .

Nicking enzyme-assisted amplification reaction (NEAR), or nicking enzyme-assisted amplification (NEAA) relies on a nicking endonuclease (NE, such as Nt.BstNBI, Nb.BtsI, and Nb.BsrDI), in addition to a strand-displacing DNA polymerase (Bst DNA polymerase) [143] . NEAR circumvents the need for a thermal denaturing dsDNA template by using NE to recognize a specific dsDNA sequence covered by the primer region and introduce a nick site on one strand, exposing its 3 end for elongation. A typical NEAR takes 15-30 minutes at 54-58°C to complete and is extremely efficient in target amplification. However, NEAR is not as popular as LAMP or RPA due to its tendency to produce nonspecific products [144] . Despite that disadvantage, NEAR was soon adopted into a commercial diagnostic tool, the ID Now™ system (Abbott, USA), in which various diseases can be detected within 5 minutes directly from clinical samples. Even though ID Now™ is widely used in the USA, contradicting evaluations of its performance for SARS-CoV-2 diagnosis have been reported. Most clinical reports showed 54.8-94% positive agreement between ID Now™ and qRT-PCR based platforms [145] [146] [147] [148] [149] [150] and some performance may be caused by errors in specimen preparation or improper handling of the machine. In addition, Tu et al. reported that the high diagnostic value from this system can be achieved with symptomatic patients [151] .

The diagnostic value of iNAATs is usually compared to qRT-PCR or other conventional diagnostic methods, thus it is difficult to justify the relative performance of iNAATs to each other. So far, only a few studies have directly compared iNAATs for detecting a specific target. Tran et al. found that RT-LAMP is superior to the other two iNAATs that utilize Bst DNA polymerase for detecting SARS-CoV-2, cross-priming amplification (CPA), and polymerase spiral reaction (PSR) with a 20-40 times lower LOD value [135] . Naveen and colleagues showed that the LOD of RT-LAMP was equal or one order of magnitude lower than that of RT-RPA in detecting two ginger-infecting viruses [152] and cardamom vein clearing virus [153] . These data support the conclusion that LAMP is currently the most suitable iNAAT for SARS-CoV-2 diagnosis. With the recent demonstrations of using alternative specimens, including saliva [154, 155] , and exhaled breath samples (by a face mask-based collector) [156] , RT-LAMP has been transformed to adapt better to the POC diagnostic settings.

CRISPR and CRISPR-associated proteins (Cas) systems are prokaryotic RNA-mediated immune systems that prevent bacteriophage infection and plasmid transfer [157] [158] [159] . CRISPR is divided into two classes, Class 1, which includes groups I, III, IV, and Class 2, which includes groups II, V, and VI, and further categorized into more than 30 subgroups [160] . In which, Cas9 (formerly Csn1) represents subgroup II-A and is the most widely used Cas nuclease for genome editing in a wide range of organisms and cell types [161] [162] [163] [164] . The method has been used as an antimicrobial agent for the removal of bacterial pathogens [165] [166] [167] and viruses including HIV-1 [168, 169] , human papillomavirus [170] , hepatitis B virus [170, 171] , and SARS-Cov-2 [172] . In Class 2, there is also a nuclease in the VA subgroup, Cas12a (formerly Cpf1) isolated from Francisella novicida. It has a different mechanism of action than Cas9, with the ability to use a single crRNA molecule to find the target sequence and cut the target sequence at two staggering sites. In addition, Cas12a also exhibits collateral nuclease/cleavage activity, which is capable of cutting nonspecific single-stranded DNA fragments immediately upon binding to the target sequence [173] . These features make Cas12a a more favorable tool for application in the specific detection of DNA/RNA sequences.

Other types of Cas nucleases are also beginning to be exploited for nucleic acid detection purposes, including Cas13a (formerly known as C2c2, belonging to subgroup VI-A) and Cas13b (formerly known as C2c6, belonging to group VI-B1) [174] . With their ability to recognize RNA, Cas13a and Cas13b were used for the first time in RNA editing [175, 176] . Using their nonspecific cleavage RNAse activity of single-stranded RNA, these two nucleases and Cas12a were used respectively in the nucleic acid detection kits including Specific High Sensitivity Enzymatic Reporter UnLOCKing (SHERLOCK) [177] , SHERLOCK v2 [178] and DNA endonucleasetargeted CRISPR trans reporter (DETECTR) [173] . So far, SHERLOCK has been reported to be able to detect different pathogens at ng or pg concentration of DNA or RNA, such as ZIKA virus with a titer as low as 2.1 attomolar (aM) from clinical samples containing Escherichia coli and Pseudomonas aeruginosa [179] . Additionally, the CRISPR-Cas13a-based system was shown to identify single nucleotide polymorphisms in humans as well as to discriminate between the antibiotic-resistant strains of Klebsiella pneumoniae with high specificity [179] . SHERLOCK v2 was developed for multiplex detection of nucleic acid in a single reaction chamber at a concentration range of attomolar (aM) of the target. Integrating SHERLOCK v2 signal amplification with LFA, the SHERLOCK v2 paper-based test can detect as low as 2 aM of a nucleic acid target (acyltransferase gene) after 90 min, with less background and increased signal intensity [21] . The SHERLOCK system was further modified into miSHERLOCK (minimally instrumented SHERLOCK) as a low-cost, selfcontained, POCT device that used crude saliva samples and required less than 1 hour of sampleto-answer time [180] . Despite the excellent efficiency, the number of reports available for CRISPR-based diagnostics (CRISPR-Dx) for viruses, bacteria, mutations, and SNPs is still limited [181] . Figure 2 depicts the workflow for real-time CRISPR-Cas13a based detection of SARS-CoV-2 from clinical samples. Broughton et al. developed a CRISPR-Cas12based LFA for the detection of SARS-CoV-2 in less than 40 min [182] . In this work, they tested 36 patients of SARS-CoV-2 and 42 patients with other respiratory infections. It was found that CRISPR-Cas12-based performed on par with the RT-PCR assay as it reached 100% positive and negative predictive agreement. Similarly, Ding et al. developed an All-In-One Dual CRISPR-Cas12a (AIOD-CRISPR) assay for the detection of SARS-CoV-2 [182] . They targeted the nucleoprotein encoding gene and found the results were consistent with the RT-PCR assay. This CRISPRbased tool was inexpensive to produce and required only 20 minutes of time-to-result using clinical samples [182] . In another attempt, Chen et al. coupled LAMP and CRISPR-Cas12a for the Figure 2 . CRISPR-Cas13a based detection of SARS-CoV-2. Nasopharyngeal and oropharyngeal specimens are collected via sterile swabs. The collected sample is then diluted in an appropriate buffer, followed by a few heating steps. Sample heating steps release ssRNA from the virus and facilitate the deactivation of nuclease if any is present in the sample. Following the heating step, the viral RNA is subjected to RT-RPA for the amplification of target sequences in the form of cDNAs, which are in turn transcribed by T7 RNA polymerase. The accumulated amplification products of the targeted RNA sequence are provided for Cas13a-based detection assay. Cas13a recognizes T7-transcribed RNA sequences if appropriate guide RNA (gRNA) is presented. This leads to the activation of Cas13a and displays its nonspecific RNAase activity, resulting in the nonspecific cleavage of the fluorophore-ssRNA-quencher complex. The florescence emitted by the fluorophore can be quantified via spectroscopy, indicating the concentration of the ssRNA template. Alternatively, the cleaved reporter molecule can be detected via paper LFA. The image was created with BioRender. com. rapid diagnostic of SARS-CoV-2 [183] . With the help of smart phone and 3-D printing equipment, the virus has been detected by the naked eye, which was a great advantage for POCT. RNA of SARS-CoV-2 has been detected within 40 minutes, with a high sensitivity of 20 SARS-CoV-2 RNA copies per sample. Additionally, Huang et al. developed a CRISPR-Cas12a-gRNA complex and fluorescent probes to detect nucleic acid produced by RT-PCR or RT-RPA [184] . It was found that with the aid of CRISPR-Cas12 system, SARS-CoV -2 was detected within 50 minutes, with the LOD of 2 copies per nasal swab. More recently, Li et al. established a CRISPR-based LFA for POCT of SARS-CoV-2 that can detect 10-100 virus RNA copies/μL from clinical samples [185] . The system was further improved by developing easy-readout and sensitive enhanced (ERASE) strips to reach a LOD of 1 copy/μL. The method was then used for testing 649 clinical samples, achieving 90.67% positive predictive agreement and 99.21% negative predictive agreement. Similarly, Yang et al. used Cas13a to couple with a universal autonomous enzyme-free hybridization chain reaction (HCR) by designing a cleavage reporter assay [186] . Once Cas13a found target sequences, it triggered the downstream HCR circuits. They designed three guide RNAs (gRNAs) for targeting SARS-CoV-2 S, N, and Orf1ab genes and succeeded in detecting the target sequences within 1 h at attomolar level sensitivity [186] . Even though CRISPR systems are mainly used for genome editing, this growing evidence has demonstrated their value in boosting the performance of iNAAT detections, making iNAATs more suitable to POC settings.

Microfluidics is an exponentially growing field of engineering and has shown a rather large number of applications in a wide range of areas like rapid diagnostics, biomedical therapy, organ culture, 3D culture, in vitro toxicity testing, nucleic acid extraction, and amplification, drug delivery, single-cell analysis, and many more [171, [187] [188] [189] [190] [191] [192] . This technique is based on the precise manipulations of micro-scale fluids in micro-channels. It has been widely used and have shown number of distinctive advantages, including rapid sample processing, assay controllability, portability, millimeter-scale design, multi-tasking capability, lowvolume assay, and low-cost requirements, in comparison to other conventional platforms. Particularly, microfluidic devices have demonstrated high practical and diagnostic values in the field of rapid, POC pathogen detection, such as assays targeting parasites and viruses [193] [194] [195] [196] .

Isolation of nucleic acids is the critical step in a NAAT/iNAAT workflow, but can also be timeconsuming, costly, and tedious. The product quality and efficiency of the isolation step can be inconsistent between batches or labs. Therefore, as aforementioned, automatic, high-throughput extraction and detection devices can facilitate the whole diagnostic procedure, from obtaining the clinical sample to reading results. Brassard et al. designed a microfluidic device for the extraction of DNA from blood samples which helped reduce the time and chemical expense for the extraction [197] . Similarly, Geissler et al. established a microfluidic device for performing the whole process of bacteria identification for E. coli O157: H7 from cell lysis, multiplex PCR amplification, to on-chip hybridization with fluorescent gene markers [198] . More recently, Sullivan et al. [199] designed microfluidic devices for the purification of nucleic acids directly from blood samples using isotachophoresis (ITP), which was directly used for POCTs. Qiu et al. introduced a fully disposable heat capillary tube without an electric supply for DNA amplification, in which PCR reagents were repeatedly passed through different temperature zones [200] . The device allowed a single-step nucleic acid dipstick assay for visualizing DNA amplification by the naked eye. It achieved the sensitivity of 1.0 TCID 50 /mL for detecting H1N1 within 35 minutes and was suitable for instrument-free diagnosis in remote areas [200] .

Under the burden of COVID-19 pandemic, the combination of microfluidics and the available diagnostic methods has provided timely upgrades to the available diagnostic procedures. A semiautomatic high-throughput microfluidic device was developed for measuring in parallel the anti-SARS-CoV-2 IgG/IgM levels in 50 serum samples and achieved a sensitivity of 95% with a specificity of 91% [201] . An Opto-microfluidic sensing platform based on gold nanospikes was developed for the detection of antibodies in 1 μL of human plasma within 30 minutes. This label-free platform reached a relatively low LOD of 0.08 ng/mL for serological testing of anti-SARS-CoV-2 antibodies presented in diluted blood plasma samples [202] . Another highly sensitive and specific portable microfluidic immunoassay system was engineered for on-site and simultaneous detection of IgG/ IgM/Antigen of SARS-CoV-2 within 15 minutes [203] . Lately, Ramachandran et al. designed an electric field-driven microfluidic device for CRISPR-based detection of SARS-CoV-2 within 35 minutes from contrived and clinical nasopharyngeal swab samples [204] .

Besides microfluidic devices, an urgent need has been arisen for POC diagnosis of COVID-19 that has motivated the invention of a portable, low-cost biosensors, especially electrochemical immunosensors. Mavrikou et al. utilized membraneengineered mammalian cells electroinserted with SARS-CoV-2 Spike S1 antibody to detect the binding of SARS-CoV-2 onto the membrane via measuring changes in membrane potential [205] . The results were obtained within 3 minutes with 93% accuracy as compared to RT-PCR [205] . SARS-CoV-2 nucleocapsid protein (N) can be alternatively detected by its cognate antibody grafted on a gold-coated microcantilever surface at the LOD of 100 viral copies/mL or 0.71 ng/ml [206] . A portable, disposable electrochemical sensor made from molecularly imprinted polymers (MIPs) was capable of detecting SARS-CoV-2 N protein with a LOD of 15 fM [207] . Relying on changes in the volatile organic compounds (VOCs) in exhaled human breath to indicate SARS-CoV-2 presence, a portable electronic nose (GeNose C19) was fabricated with a metal oxide semiconductor gas sensor array and supported by machine learning models to detect SARS-CoV-2, up to a sensitivity and specificity of 86-94% and 88-95%, respectively [208] .

So far, graphene has been demonstrated to be an excellent material for developing biosensors, which has shown its high conductivity, stability, and specific surface area. However, due to its lack of reactive chemical groups, it is usually functionalized by nanoparticles. For example, in order to develop LEAD (Low-cost Electrochemical Advanced Diagnostic) system, Lima and colleagues first treated a graphite pencil electrode (GPE) with glutaraldehyde solution, then coated GPE with AuNPs functionalized with cys, and finally mixed it with a solution consisting of N-(3-dimethylaminopropyl)-N-ethylcarbodiimide hydrochloride (EDC), N-hydroxysuccinimide (NHS), and human angiotensin-converting enzyme 2 (ACE2) receptor, enabling the immobilization of ACE2 on GPE surface. This device can directly capture SARS-CoV-2 in clinical samples (saliva and NP swab stored in VTM) and detect at least 229 fg/ml of S protein by measuring the signal suppression of a redox probe [Fe(CN) 6 ] −3/−4 upon S protein -ACE2 binding [209] . It can be manufactured for only $1.5, requires 6.5 minutes of sample-to-answer time, and displays 100% sensitivity and specificity using saliva specimen [209] . Alternatively, Nguyen et al. functionalized graphene with 1-pyrenebutyric acid N-hydroxysuccinimide ester (PBASE) for immobilizing anti-SARS-CoV-2 spike RBD antibody [210] . SARS-CoV-2 in artificial saliva, down to 3.75 fg/ml, was recognized upon binding to the immobilized antibody by observing changes in graphene's phononic response via Raman spectroscopy [210] . A crumpled graphene field-effect transistor (FET)-based biosensor immobilized with N-and S-protein antibodies was shown to detect N and S proteins at extremely low LOD (1 aM), surpassing ELISA sensitivity [211] .

Other than electrochemical immunosensors, a SARS-CoV-2 biosensor can be integrated with microfluidic devices and iNAAT technologies as well. A face-mask-integrated SARS-CoV-2 sensor was made to collect breath-generating viruses accumulated under the mask and detect their RNAs by activating lyophilized Cas12a SHERLOCK reagents that has embedded on a paper-based microfluidic device [212] . This portable, personal testing device inherited from previous discoveries on breath sampling technologies, paper-based biosensor, and LFA for visualized monitoring of the results, allowing for a LOD of 500 IVT (in vitro transcribed) RNA copies per reaction [212] . Altogether, microfluidic devices, and biosensors have shown a great potential in adapting lab-based pathogen diagnostics to POC and low-cost settings while maintaining detection efficiency. However, most of these products and procedures have not been validated in a large-scale clinical trials to confirm their practical uses.

The ability to make fast and accurate decisions has been a vital factor affecting the capacity of COVID-19 diagnostic systems to cope with extremely high testing volumes. With limited clinical sensitivity of qRT-PCR demonstrated at the initial stage of the pandemic, chest computed tomography (CT) and chest X-ray (CXR) was shown to efficiently support qRT-PCR and improve the overall accuracy. Compared to PCR, chest CT is easy to perform, faster, more standardized, and consistent as most of the COVID-19 patients exhibit typical radiographic features, including ground-glass opacity (GGO), crazy-paving pattern, pleural effusions, and consolidation [213] . Moreover, a chest CT scan can be used to assess the severity of symptomatic patients [214] . However, chest CT has a major drawback of relatively low specificity (25-80%) [215] , causing misinterpretation of the infections caused by other pathogens, and thus cannot be used as a ground truth. The use of artificial intelligence (AI) is a promising approach to solve this problem, reducing the workload for radiologists, and improving the overall accuracy of radiography-based diagnosis.

An online processing strategy was exploited by Saba's group by developing six models (two machine learning (ML) models, two transfer learning (TL) models, and two deep learning (DL) models) for classifying COVID-19 (CoP) and non-COVID-19 pneumonia (NCoP). They demonstrated 74.58-99.63% accuracy and 0.74-0.99 AUCs (areas under the ROC curve) with less than 2 s of inference time [216] . Another online server can distinguish COVID-19 patients from bacterial pneumonia patients and healthy people with a recall (sensitivity) of 93% and PPV of 86% while extracting main lesion features such as GGO for assisting doctor decision [217] .

Due to the limited number of annotated radiographs, transfer learning techniques has been used to accelerate the training time and allow for training deep CNN networks with relatively small datasets [218, 219] . Noticeably, Abbas et al. developed DeTraC (Decompose, Transfer, and Compose), a deep CNN architecture using transfer learning and class decomposition, to achieve high accuracy and specificity of 98.23% and 96.34%, respectively, with an ImageNet pre-trained CNN model (VGG19) [220] . Transfer learning is extremely beneficial for training small datasets, but when there are many positive cases to collect radiographs, pre-training on ImageNet will not be useful.

In order to develop an automatic COVID-19 prediction model, Chen et al. were able to prospectively collect 46,096 anonymous CT images of 106 COVID-19 inpatients for training using Unet++ [221] . The validation tests on an external dataset achieved a sensitivity and specificity of 98% and 94%, respectively, showing that the DL model performance was on par with expert radiologists and helped reduce the reading time of radiologists by 65% [221] . Shan et al. approached the limitations of the chest CT-based diagnosis procedure differently by building a DL-based automatic segmentation tool to quantify infection volume, dramatically reducing the image delineation time from 1-5 h to 4 minutes while achieving 91.6% Dice coefficient with the manual segmentation [222] .

Other than medical computer vision, AI also provides an excellent tool for tele diagnosis of COVID-19 via examining cough and breath sounds. An AI developed by Laguarta's group can identify asymptomatic COVID-19 patients with 100% sensitivity and 83.2% specificity [223] . Several crowdsourced annotated datasets of cough sounds are available to support research in this field, such as COUGHVID with over 25,000 recordings [224] and Coswara with recordings from 941 participants [225] .

Even though the performance data encourage the use of AI in assisting COVID-19 diagnosis, it still needs lots of effort for realization in clinical practice. It is not just a matter of accuracy to gain trust from clinicians, especially in the life-death decision-making process. Therefore, diagnostic interpretation, engagement, and communication between AI and clinicians are crucial to developing practical workflows.

In response to the emergency of the COVID-19 pandemic, the US Food & Drug Administration (FDA) has used its Emergency Use Authorization (EUA) authority to allow for the use of a medicine or testing device without all the evidence that is normally required. By July 23 rd , 2021, FDA authorized 395 tests and sample collection kits for SARS-CoV-2 detection under EUAs [226] . Noticeably, 53 of these can be used with homecollected specimens and 11 of these were authorized for at-home test [226] , reflecting an unprecedented trend in the diagnostics market. BME has expanded over the border of applied biological and medical sciences, employing the knowledge of interdisciplinary research from the collaborations with mechanical, chemical, physical, and computer engineers, shifting the focus of diagnostic research to POCT and personal testing solutions while upgrading available tools.

In this review, we have summarized one and a half years full of innovations in the field of BME research for COVID-19 diagnostics. While immunoassay-based and NAAT-based diagnostics tools have demonstrated their critical role in our quick response to the initial outbreak, the fast spread and persistence of SARS-CoV -2 have continuously forced the researchers to seek more versatile (iNAATs), precise (CRISPR), high-throughput (deep learning), cost-saving and personalized (microfluidic devices and biosensors) solutions. Nevertheless, none of the single methods is perfect for controlling the disease. Therefore, the development of each method needs to be more specialized in coordinating with the others, much like layers of a Swiss Cheese Model. It is anticipated that in the near future, more and more technology will reach the maturation stage and become essential parts of the new normal in the era of COVID-19. While some BME technologies such as PCR and ELISA seem to have reached their peak of development, iNAATs and other POCT diagnoses will continuously benefit from interdisciplinary research, and they need to focus more on practical perspectives such as cost optimization, portability, versatility, and environmental friendliness. Not only for dealing with this pandemic, but the achievements of BME in this field will provide powerful tools for ensuring health and wellbeing for all, as a goal for sustainable development that the United Nations established.

-COVID-19 is one of the most severe global health crises that humanity has ever faced -Biomedical engineering (BME) has been extensively and intensively applied to diagnose COVID-19 -Immunoassay-based and NAAT-based diagnostics tools play a critical role in quick response to the initial outbreak -More versatile, precise, high-throughput, and cost-saving solutions are needed for later phases of the pandemic -But none of the single methods is perfect for controlling the disease. -More and more BME inventions need to be developed and will become essential parts of the new normal in the era of COVID-19

COVID-19 Coronavirus Pandemic

Global economic effects of COVID-19

SARS-CoV-2 receptor and regulator of the renin-angiotensin system: celebrating the 20th anniversary of the discovery of ACE2

Severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2): a global pandemic and treatment strategies

COVID-19 Diagnostic Strategies

Japans public health and culture, and the ongoing fight against COVID-19

COVID-19: transmission, diagnosis, policy intervention, potential broader perspective on the rapidly evolving situation in Bangladesh

Present scenario of COVID-19 in Bangladesh and government preparedness for facing challenges

COVID-19: the catastrophe of our time

Management of mental health during COVID 19 pandemic: possible strategies

COVID-19: asymptomatic carrier transmission is an underestimated problem

Coronavirus disease 2019 (COVID-19): a literature review

SARS-CoV-2 and COVID-19: a genetic, epidemiological, and evolutionary perspective

COVID-19 diagnostic services: global markets

Asymptomatic middle east respiratory syndrome coronavirus infection using a serologic survey in Korea

Molecular mechanism for antibody-dependent enhancement of coronavirus entry

A mouse model for MERS coronavirus-induced acute respiratory distress syndrome

Characterization of novel monoclonal antibodies against the MERS-coronavirus spike protein and their application in species-independent antibody detection by competitive ELISA

A pneumonia outbreak associated with a new coronavirus of probable bat origin

Loop mediated isothermal amplification (LAMP) assays as a rapid diagnostic for COVID-19

Multiplexed and portable nucleic acid detection platform with Cas13, Cas12a, and Csm6

Improved analytical sensitivity of lateral flow assay using sponge for HBV nucleic acid detection

CRISPR-Cas12a (AIOD-CRISPR) assay: a case for rapid, ultrasensitive and visual detection of novel coronavirus SARS-CoV-2 and HIV virus

An update on molecular diagnostics for COVID-19

Temporal profiles of viral load in posterior oropharyngeal saliva samples and serum antibody responses during infection by SARS-CoV-2: an observational cohort study

Antibody responses to SARS-CoV-2 in patients with novel coronavirus disease 2019

Viral kinetics and antibody responses in patients with COVID-19. medRxiv

A serological assay to detect SARS-CoV-2 seroconversion in humans

A highly specific and sensitive serological assay detects SARS-CoV-2 antibody levels in COVID-19 patients that correlate with neutralization

Testing IgG antibodies against the RBD of SARS-CoV-2 is sufficient and necessary for COVID-19 diagnosis

Analytical and clinical validation of an ELISA for specific SARS-CoV-2 IgG, IgA, and IgM antibodies

Temporal course of SARS-CoV-2 antibody positivity in patients with COVID-19 following the first clinical presentation

Diagnostic performance of seven rapid IgG/IgM antibody tests and the Euroimmun IgA/IgG ELISA in COVID-19 patients

Proposal of De novo antigen test for COVID-19: ultrasensitive detection of spike proteins of SARS-CoV-2

Correlation of automated chemiluminescent method with enzyme-linked immunosorbent assay (ELISA) antibody titers in convalescent COVID-19 plasma samples: development of rapid, cost-effective semi-quantitative diagnostic methods

Validation of a chemiluminescent assay for specific SARS-CoV-2 antibody

Serum IgA, IgM, and IgG responses in COVID-19

Multi-platform comparison of SARS-CoV-2 serology assays for the detection of COVID-19

Clinical usefulness of fully automated chemiluminescent immunoassay for quantitative antibody measurements in COVID-19 patients

The real life performance of 7 automated anti-SARS-CoV-2 IgG and IgM/IgA immunoassays

An evaluation of COVID-19 serological assays informs future diagnostics and exposure assessment

Comparison of eight commercial, high-throughput, automated or ELISA assays detecting SARS-CoV-2 IgG or total antibody

Performance of 30 commercial SARS-CoV-2 serology assays in testing symptomatic COVID-19 patients

Comparison of serologic response of hospitalized COVID-19 patients using 8 immunoassays

Early detection of antibodies against various structural proteins of the SARS-associated coronavirus in SARS patients

Role of rapid antibody and ELISA tests in the evaluation of serological response in patients with SARS-CoV-2 PCR positivity

COVID-19 serological tests: how well do they actually perform?

Diagnostic accuracy of serological tests for covid-19: systematic review and meta-analysis

COVID-19 antibody seroprevalence in

Performance and operational feasibility of antigen and antibody rapid diagnostic tests for COVID-19 in symptomatic and asymptomatic patients in Cameroon: a clinical, prospective, diagnostic accuracy study

Evaluation of rapid antigen test for detection of SARS-CoV-2 virus

Comparative diagnostic performance of rapid antigen detection tests for COVID-19 in a hospital setting

Low performance of rapid antigen detection test as frontline testing for COVID-19 diagnosis

Comparative sensitivity evaluation for 122 CE-marked SARS-CoV-2 antigen rapid tests

Evaluation of a rapid antigen test (Panbio COVID-19 Ag rapid test device) for SARS-CoV-2 detection in asymptomatic close contacts of COVID-19 patients

Performance of SARS-CoV-2 rapid antigen test compared with real-time RT-PCR in asymptomatic individuals

Performance evaluation of serial SARS-CoV-2 rapid antigen testing during a nursing home outbreak

Longitudinal assessment of diagnostic test performance over the course of acute SARS-CoV-2 infection

Panbio antigen rapid test is reliable to diagnose SARS-CoV-2 infection in the first 7 days after the onset of symptoms

Correlation between 3790 quantitative polymerase chain reaction-positives samples and positive cell cultures, including 1941 severe acute respiratory syndrome coronavirus 2 isolates

Infectivity assay for detection of SARS-CoV-2 in samples from patients with COVID-19

Test sensitivity is secondary to frequency and turnaround time for COVID-19 screening

A compile of RT-PCR protocols for the detection of SARS-CoV-2

Detection of 2019 novel coronavirus (2019-nCoV) by real-time RT-PCR

Comparative performance of SARS-CoV-2 detection assays using seven different primer-probe sets and one assay kit

Multiple assays in a real-time RT-PCR SARS-CoV-2 panel can mitigate the risk of loss of sensitivity by new genomic variants during the COVID-19 outbreak

Sequence mismatch in PCR probes may mask the COVID-19 detection in Nepal

Molecular analysis of several in-house rRT-PCR protocols for SARS-CoV-2 detection in the context of genetic variability of the virus in Colombia

Presence of mismatches between diagnostic PCR assays and coronavirus SARS-CoV-2 genome

Mutations on COVID-19 diagnostic targets

A recurrent mutation at position 26340 of SARS-CoV-2 is associated with failure of the E gene quantitative reverse transcription-PCR utilized in a commercial dual-target diagnostic assay

SARS-CoV-2 samples may escape detection because of a single point mutation in the N gene

A novel point mutation in the N gene of SARS-CoV-2 may affect the detection of the virus by reverse transcription-quantitative PCR

Genomic epidemiology of SARS-CoV-2 in the UAE reveals novel virus mutation, patterns of co-infection and tissue specific host immune response

Host-directed editing of the SARS-CoV-2 genome

Evaluation of the QIAstat-Dx respiratory SARS-CoV-2 panel, the first rapid multiplex PCR commercial assay for SARS-CoV-2 detection

Single base mutations in the nucleocapsid gene of SARS-CoV-2 affects amplification efficiency of sequence variants and may lead to assay failure

Influenza co-infection associated with severity and mortality in COVID-19 patients

Development and validation of a multiplex reverse transcriptase-PCR assay for simultaneous testing of influenza A, influenza B and SARS-CoV-2

Clinical evaluation of a fully automated, laboratory-developed multiplex RT-PCR assay integrating dual-target SARS-CoV-2 and influenza A/B detection on a high-throughput platform

Laboratory diagnosis and monitoring the viral shedding of SARS-CoV-2 infection

Comparison of nasopharyngeal and oropharyngeal swabs for SARS-CoV-2 detection in 353 patients received tests with both specimens simultaneously

Detection and analysis of nucleic acid in various biological samples of COVID-19 patients

Detection of SARS-CoV-2 in human retinal biopsies of deceased COVID-19 patients

Olfactory transmucosal SARS-CoV-2 invasion as a port of central nervous system entry in individuals with COVID-19

Neuroinvasion of SARS-CoV-2 in human and mouse brain

Clinical Performance of SARS-CoV-2 Molecular Tests

Comparison of throat swabs and sputum specimens for viral nucleic acid detection in 52 cases of novel coronavirus (SARS-Cov-2)-infected pneumonia (COVID-19)

Complications of COVID-19 nasopharyngeal swab test

Is oropharyngeal sampling a reliable test to detect SARS-CoV-2? -authors' reply

SARS-CoV-2 presence in the saliva, tears, and cerumen of COVID −19 patients

Performance of RT-PCR on saliva specimens compared with nasopharyngeal swabs for the detection of SARS-CoV-2 in children: a prospective comparative clinical trial

Saliva sample as a non-invasive specimen for the diagnosis of coronavirus disease 2019: a cross-sectional study

Saliva is more sensitive than nasopharyngeal or nasal swabs for diagnosis of asymptomatic and mild COVID-19 infection

Does sampling saliva increase detection of SARS-CoV-2 by RT-PCR? Comparing saliva with oro-nasopharyngeal swabs

Saliva as a gold-standard sample for SARS-CoV-2 detection

Diagnostic accuracy and acceptability of molecular diagnosis of COVID-19 on saliva samples relative to nasopharyngeal swabs in tropical hospital and extra-hospital contexts: the COVISAL study

Potential preanalytical and analytical vulnerabilities in the laboratory diagnosis of coronavirus disease

Real-time RT-PCR in COVID-19 detection: issues affecting the results

Sensitivity of chest CT for COVID-19: comparison to RT-PCR

Diagnostic performance between CT and initial real-time RT-PCR for clinically suspected 2019 coronavirus disease (COVID-19) patients outside Wuhan, China

Application and optimization of RT-PCR in diagnosis of SARS-CoV-2 infection. medRxiv

Sensitivity of RT-PCR testing of upper respiratory tract samples for SARS-CoV-2 in hospitalised patients: a retrospective cohort study

Stop COVID Cohort: an Observational Study of 3480

Patients Admitted to the Sechenov University Hospital Network in Moscow City for Suspected Coronavirus Disease 2019 (COVID-19) Infection

Real-life clinical sensitivity of SARS-CoV-2 RT-PCR test in symptomatic patients

Test, trace, isolate: evidence for declining SARS-CoV-2 PCR sensitivity in a clinical cohort

Reliable detection of SARS-CoV-2 with patient-collected swabs and saline gargles: a three-headed comparison on multiple molecular platforms

Performance of at-home self-collected saliva and nasal-oropharyngeal swabs in the surveillance of COVID-19

Saliva for use with a point of care assay for the rapid diagnosis of COVID-19

Massive and rapid COVID-19 testing is feasible by extraction-free SARS-CoV-2 RT-PCR

COVID-19 diagnostics for resource-limited settings: evaluation of "unextracted" qRT-PCR

Multiplexed and extraction-free amplification for simplified SARS-CoV-2 RT-PCR tests

Evaluation of three extraction-free SARS-CoV-2 RT-PCR assays: a feasible alternative approach with low technical requirements

Extraction-free SARS-CoV-2 detection by rapid RT-qPCR universal for all primary respiratory materials

Analytical evaluation of visby medical RT-PCR portable device for rapid detection of SARS-CoV-2. Diagnostics (Basel)

Assessing a novel, lab-free, point-of-care test for SARS-CoV-2 (CovidNudge): a diagnostic accuracy study

Rapid direct nucleic acid amplification test without RNA extraction for SARS-CoV-2 using a portable PCR thermocycler

Platinum chloride-based viability RT-qPCR for SARS-CoV-2 detection in complex samples

Assessing the feasibility and effectiveness of household-pooled universal testing to control COVID-19 epidemics

Identifying optimal COVID-19 testing strategies for schools and businesses: balancing testing frequency, individual test technology, and cost

Clinical performance and sample freeze-thaw stability of the cobas® 6800 SARS-CoV-2 assay for the detection of SARS-CoV-2 in oro-/nasopharyngeal swabs and lower respiratory specimens

Verification and validation of SARS-CoV-2 assay performance on the abbott m 2000 and alinity m systems

Brief validation of the novel GeneXpert Xpress SARS-CoV-2 PCR assay

Comparison of the analytical sensitivity of seven commonly used commercial SARS-CoV-2 automated molecular assays

Loopmediated isothermal amplification of DNA

A novel One-pot rapid diagnostic technology for COVID-19

Rapid detection of novel coronavirus/Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) by reverse transcription-loop-mediated isothermal amplification

Development of a reverse transcription-loop-mediated isothermal amplification as a rapid early-detection method for novel SARS-CoV-2

Rapid detection of COVID-19 coronavirus using a reverse transcriptional loop-mediated isothermal amplification (RT-LAMP) diagnostic platform

Use of the variplex SARS-CoV-2 RT-LAMP as a rapid molecular assay to complement RT-PCR for COVID-19 diagnosis

A colorimetric RT-LAMP assay and LAMP-sequencing for detecting SARS-CoV-2 RNA in clinical samples

Development and validation of a rapid, single-step reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) system potentially to be used for reliable and high-throughput screening of COVID-19

A rapid, simple, inexpensive, and mobile colorimetric assay COVID-19-LAMP for mass on-site screening of COVID-19

Evaluation of rapid diagnosis of novel coronavirus disease (COVID-19) using loop-mediated isothermal amplification

A comparative study of isothermal nucleic acid amplification methods for SARS-CoV-2 detection at point-of-care. bioRxiv

Lyophilized visually readable loop-mediated isothermal reverse transcriptase nucleic acid amplification test for detection Ebola Zaire RNA

Evaluation of the stability of lyophilized loop-mediated isothermal amplification reagents for the detection of Coxiella burnetii

Colorimetric RT-LAMP SARS-CoV-2 diagnostic sensitivity relies on color interpretation and viral load

Can a field molecular diagnosis be accurate? A performance evaluation of colorimetric RT-LAMP for the detection of SARS-CoV-2 in a hospital setting

DNA detection using recombination proteins

Single-copy sensitive, field-deployable, and simultaneous dual-gene detection of SARS-CoV-2 RNA via modified RT-RPA

Development of a reverse transcription recombinase polymerase amplification assay for rapid and direct visual detection of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2)

Isothermal reactions for the amplification of oligonucleotides

Technical aspects of nicking enzyme assisted amplification

Comparison of abbott ID NOW COVID-19 rapid molecular assay to cepheid xpert xpress SARS-CoV-2 assay in dry nasal swabs

Performance of Abbott ID Now COVID-19 rapid nucleic acid amplification test using nasopharyngeal swabs transported in viral transport media and dry nasal swabs in a New York city academic institution

Comparison of Abbott ID now and Abbott m2000 methods for the detection of SARS-CoV-2 from nasopharyngeal and nasal swabs from symptomatic patients

Comparison of Abbott ID now, diasorin simplexa, and CDC FDA emergency use authorization methods for the detection of SARS-CoV-2 from nasopharyngeal and nasal swabs from individuals diagnosed with COVID-19

Comparison of cepheid xpert Xpress and Abbott ID now to roche cobas for the rapid detection of SARS-CoV-2

Clinical evaluation of three sample-to-answer platforms for detection of SARS-CoV-2

Sensitivity of ID NOW and RT-PCR for detection of SARS-CoV-2 in an ambulatory population

Development of reverse transcription loop-mediated isothermal amplification (RT-LAMP) and reverse transcription recombinase polymerase amplification (RT-RPA) assays for the detection of two novel viruses infecting ginger

Reverse transcriptase loop-mediated isothermal amplification and reverse transcriptase recombinase amplification assays for rapid and sensitive detection of cardamom vein clearing virus

A Novel Saliva RT-LAMP Workflow for Rapid Identification of COVID-19 Cases and Restraining Viral Spread

A rapid near-patient detection system for SARS-CoV-2 using saliva

Wearable collector for noninvasive sampling of SARS-CoV-2 from exhaled breath for rapid detection

CRISPR provides acquired resistance against viruses in prokaryotes

CRISPR/Cas, the immune system of bacteria and archaea

CRISPR-cas systems optimize their immune response by specifying the site of spacer integration

Diversity, classification and evolution of CRISPR-Cas systems

Multiplex genome engineering using CRISPR/Cas systems

A programmable dual-RNA-guided DNA endonuclease in adaptive bacterial immunity

Exploring the potential of genome editing CRISPR-Cas9 technology

Recent advances in CRISPR-Cas9 genome editing technology for biological and biomedical investigations

Exploiting CRISPR-Cas nucleases to produce sequence-specific antimicrobials

Sequence-specific antimicrobials using efficiently delivered RNA-guided nucleases

Temperate and lytic bacteriophages programmed to sensitize and kill antibiotic-resistant bacteria

Harnessing the CRISPR/Cas9 system to disrupt latent HIV-1 provirus

The CRISPR/Cas9 system inactivates latent HIV-1 proviral DNA

Suppression of hepatitis B virus DNA accumulation in chronically infected cells using a bacterial CRISPR/Cas RNA-guided DNA endonuclease

Progress in microfluidics-based exosome separation and detection technologies for diagnostic applications

Development of CRISPR as an antiviral strategy to combat SARS-CoV-2 and Influenza

CRISPR-Cas12a target binding unleashes indiscriminate single-stranded DNase activity

Diversity and evolution of class 2 CRISPR-Cas systems

RNA targeting with CRISPR-Cas13

RNA editing with CRISPR-Cas13

SHERLOCK: nucleic acid detection with CRISPR nucleases

Multiplexed and portable nucleic acid detection platform with Cas13, Cas12a, and Csm6

Nucleic acid detection with CRISPR-Cas13a/C2c2

Minimally instrumented SHERLOCK (miSHERLOCK) for CRISPR-based point-of-care diagnosis of SARS-CoV-2 and emerging variants

Current progress in CRISPR-based diagnostic platforms

CRISPR-Cas12-based detection of SARS-CoV-2

Ultrasensitive and visual detection of SARS-CoV-2 using all-in-one dual CRISPR-Cas12a assay

Ultra-sensitive and high-throughput CRISPR-p owered COVID-19 diagnosis

Contamination-free visual detection of SARS-CoV-2 with CRISPR/Cas12a: a promising method in the point-of-care detection

A CRISPR-based and post-amplification coupled SARS-CoV-2 detection with a portable evanescent wave biosensor

Microfluidic organs-on-chips

Empirical model and in vivo characterization of the bacterial response to synthetic gene expression show that ribosome allocation limits growth rate

Fabrication and characterization of a PDMS-glass hybrid continuous-flow PCR chip

PDMS with designer functionalities-Properties, modifications strategies, and applications

Paper-based microfluidics for rapid diagnostics and drug delivery

The present and future role of microfluidics in biomedical research

A lab-on-chip for malaria diagnosis and surveillance

Advanced "lab-on-a-chip" to detect viruses -Current challenges and future perspectives

Microfluidic devices for detection of RNA viruses

Genetic analysis of H1N1 influenza virus from throat swab samples in a microfluidic system for point-of-care diagnostics

Extraction of nucleic acids from blood: unveiling the potential of active pneumatic pumping in centrifugal microfluidics for integration and automation of sample preparation processes

Centrifugal microfluidic lab-on-a-chip system with automated sample lysis, DNA amplification and microarray hybridization for identification of enterohemorrhagic

Nucleic acid sample preparation from whole blood in a paper microfluidic device using isotachophoresis

Instrument-free point-of-care molecular diagnosis of H1N1 based on microfluidic convective PCR

A high-throughput multiplexed microfluidic device for COVID-19 serology assays

Detection of antibodies against SARS-CoV-2 spike protein by gold nanospikes in an opto-microfluidic chip

Microfluidic immunoassays for sensitive and simultaneous detection of IgG/IgM/ Antigen of SARS-CoV-2 within 15 min

Electric field-driven microfluidics for rapid CRISPR-based diagnostics and its application to detection of SARS-CoV-2

Clinical application of the novel cell-based biosensor for the ultra-rapid detection of the SARS-CoV-2 S1 spike protein antigen: a practical approach

Highly sensitive and ultra-rapid antigen-based detection of SARS-CoV-2 using nanomechanical sensor platform

Development of a portable MIP-based electrochemical sensor for detection of SARS-CoV-2 antigen

Fast and noninvasive electronic nose for sniffing out COVID-19 based on exhaled breath-print recognition. Res Square

Minutescale detection of SARS-CoV-2 using a low-cost biosensor composed of pencil graphite electrodes

COVID-19 spike protein induced phononic modification in antibody-coupled graphene for viral detection application

Ultrasensitive detection of dopamine, IL-6 and SARS-CoV-2 proteins on crumpled graphene FET biosensor

Wearable materials with embedded synthetic biology sensors for biomolecule detection

Chest CT manifestations of new coronavirus disease 2019 (COVID-19): a pictorial review

Correlation between Chest CT Severity Scores and the Clinical Parameters of Adult Patients with COVID-19 Pneumonia

The sensitivity and specificity of chest CT in the diagnosis of COVID-19

Six artificial intelligence paradigms for tissue characterisation and classification of non-COVID-19 pneumonia against COVID-19 pneumonia in computed tomography lungs

Deep learning enables accurate diagnosis of novel coronavirus (COVID-19) with CT images

Classification of the COVID-19 infected patients using DenseNet201 based deep transfer learning

A deep learning algorithm using CT images to screen for Corona virus disease (COVID-19)

Classification of COVID-19 in chest X-ray images using DeTraC deep convolutional neural network

Deep learning-based model for detecting 2019 novel coronavirus pneumonia on high-resolution computed tomography

Lung infection quantification of COVID-19 in CT images with deep learning

COVID-19 artificial intelligence diagnosis using only cough recordings

The COUGHVID crowdsourcing dataset, a corpus for the study of large-scale cough analysis algorithms

Coswara -A Database of Breathing, Cough, and Voice Sounds for COVID-19 Diagnosis

COVID-19) Update

We thank Dr. Tran Minh Quan (Assistant Professor at VinUniversity, Vietnam) for his valuable feedback and support in revising the AI-assisted diagnostics section.

No potential conflict of interest was reported by the author(s).

The author(s) reported there is no funding associated with the work featured in this article.

Md Jamal Uddin http://orcid.org/0000-0003-2911-3255