key: cord-0729072-e78qxmeb
authors: Misra, Sourav; Pandey, Pooja; Dalbhagat, Chandrakant Genu; Mishra, Hari Niwas
title: Emerging Technologies and Coating Materials for Improved Probiotication in Food Products: a Review
date: 2022-01-30
journal: Food Bioproc Tech
DOI: 10.1007/s11947-021-02753-5
sha: c96b4db80cf7732aa479e048749eb243864355c1
doc_id: 729072
cord_uid: e78qxmeb

From the past few decades, consumers’ demand for probiotic-based functional and healthy food products is rising exponentially. Encapsulation is an emerging field to protect probiotics from unfavorable conditions and to deliver probiotics at the target place while maintaining the controlled release in the colon. Probiotics have been encapsulated for decades using different encapsulation methods to maintain their viability during processing, storage, and digestion and to give health benefits. This review focuses on novel microencapsulation techniques of probiotic bacteria including vacuum drying, microwave drying, spray freeze drying, fluidized bed drying, impinging aerosol technology, hybridization system, ultrasonication with their recent advancement, and characteristics of the commonly used polymers have been briefly discussed. Other than novel techniques, characterization of microcapsules along with their mechanism of release and stability have shown great interest recently in developing novel functional food products with synergetic effects, especially in COVID-19 outbreak. A thorough discussion of novel processing technologies and applications in food products with the incorporation of recent research works is the novelty and highlight of this review paper.

Probiotics are live microorganisms when administrated in an adequate amount confer a health benefit on the host (FAO/ WHO, 2002) . In the last century, different species of microorganisms have been used as probiotics due to their potentiality to prevent and cure diseases such as diabetes, gastric cancer, and inflammatory bowel disease (IBD) by enhancing the gut barrier function, producing antimicrobial compounds and immunoprotective responses that cause elimination of pathogens such as rotaviruses, Helicobacter pylori, Salmonella, and modulation of host immunity (Razavi et al., 2021) . Consumption of probiotics (as food products or as dietary supplements) is a major concern among consumers nowadays. The increased awareness of consumers for improving the immune system widened the application of probiotics in food products rather than the consumption of chemically synthesized drugs as the consumption of probiotics in higher quantities is an alternative way to prevent several health problems despite taking antibiotics treatment (Reid et al., 2003) .

The most used probiotic microorganisms belong to Lactobacillus and Bifidobacteria group; however, other species such as Bacillus cereus and Escherichia coli Nissle 1917 (a non-pathogenic strain) also have been employed as probiotics to accomplish the objectives such as preventing relapse of ulcerative colitis, improving the immune system, and inducing positive effects on allergy or inflammatory diseases (Solanki et al., 2013) . To fulfill these beneficial health effects, probiotics should be metabolically active during the transit of the stomach to the intestine in an adequate amount (Sanz, 2007) . The probiotic bacteria should be metabolically active at the time of consumption with a population of more than 10 6-7 CFU/mL or g end products to fulfill numerous physiological functions in the animal/human body (Adhikari et al., 2000) . Under the functional food category, probiotic foods have the widest global market accounting for 60-70% of the global foods and rise to $176.7 billion in 2013 from $33 billion in 2000 (Granato et al., 2010; Hennessy, 2014; Holzapfel et al., 2006) . The probiotics market is predicted to have a compound annual growth rate (CAGR) of 7.0% from 2018 to reach USD 69.29 billion by 2023 . The consumption of probiotic food products is a natural alternative to the administration of drugs to prevent many diseases, especially in the COVID-19 situation (Misra et al., 2021) .

To achieve the probiotics in a metabolically active state and targeted release in the colon of the host with the desired quantity (> 10 6 CFU/mL or g of end product) for fulfilling the physiological functions in the human body, probiotication of food products, i.e., incorporation of microencapsulated probiotics with suitable coating materials in food matrices, can be an advantageous and cost-effective concept as probiotics loss their viability due to the exposure to several harsh conditions such as acidic conditions of the stomach, thermal stress of the heating process, high shearing action, freezing/thawing process, complex food systems, and environmental stress during storage of food products. So, the purpose of this review is to emphasize on health benefits of probiotics, unexplored/less commonly used novel microencapsulation technologies with the suitable coating materials for encapsulation of probiotics, their release mechanism, application of the microencapsulated powder in different food products as effective carriers of probiotics with the recent trends, and the packaging/storage conditions to enhance the shelf-life of products along with the embedded probiotics.

The "probiotics" is a broad term that includes some other terminologies of different functionalities such as postbiotics, prebiotics, and synbiotics. Postbiotics can be defined as metabolic by-products of the probiotic origin or non-viable bacterial products which include organic acids, bacteriocins, acetaldehydes, ethanol, diacetyl, and hydrogen peroxide (Vallianou et al., 2020) . These metabolic products show a wide inhibitory property toward pathogens so that they can be used as an alternative to antibiotics. Different probiotic species such as Bifidobacterium lactis, Bacteroides fragilis, Lactobacillus, Escherichia coli, and Bifidobacterium breve are characterized by the properties of postbiotics such as nontoxicity, nonpathogenic, and resistance to hydrolysis by mammalian enzymes (Cicenia et al., 2014) . Prebiotics are defined as such nutrients which can able to modify the gut microflora and help in the growth of beneficial microorganisms in the gut (Rastall & Gibson, 2015) . Prebiotics can be extracted from natural resources like grains, fruits, and vegetables. Some of the common prebiotics are fructooligosaccharides, lactulose, inulin, galactooligosaccharides, arabinoxylan, and resistant starch-1, 2, 3, 4 (Hutkins et al., 2016) . These carbohydrates supply energy to epithelial cells in the colon by the fermentation process due to the action of gut microbiota. The fusion of prebiotics and probiotics results in the formation of synbiotics. The synergistic effect comes to an action when both prebiotics and probiotics work together in the living system and provide several benefits such as enhancing the survival of probiotics, disease prevention, and improvement in nutritional status. Commercial functional foods containing synbiotic relationship is gaining popularity from the point of improving gut health. Past studies have illustrated the potentiality of consumption of probiotic-containing fermented foods to prevent upper respiratory tract infection among children and adults (Makino et al., 2010) . The probiotics Lactobacillus delbrueckii ssp. bulgaricus OLL1073R-1 showed positive effects against viral infection such as the common cold by increasing the natural killer cell activity in elderly people (Sindhu et al., 2014) . Another study reported that the probiotic strain Lactobacillus rhamnosus GG reduced the severity and occurrence of rhinovirus infection in subjects after consumption for 6 months (Kumpu et al., 2015) . Probiotics inhibit angiotensin-converting enzyme (ACE), a potent vasoconstrictor by converting food proteins to bioactive peptides during the fermentation process; produce short-chain fatty acids (SCFAs) that helps in the activation of the intestinal mucosal immune cells in the human gastrointestinal (GI) tract; improve the host defense system by strengthening the communication between the gut microbiota with the epithelial and mucosal lymphoid elements (Ayyash et al., 2020) . Different probiotic strains such as Lactobacillus gasseri, Lactobacillus rhamnosus, Pediococcus pentosaceus, Lactobacillus casei, Lactobacillus plantarum, Bifidobacterium bifidum, and Bifidobacterium longum have been recognized to combat COVID-19 (Baud et al., 2020) . Thus, the administration of probiotics can be an alternative therapy during the COVID-19 pandemic. Probiotics when administrated orally have to survive in the harsh conditions during their passage through the GI tract with the potentiality to modulate the gut microbiota. The boosting of immunity by probiotics can be explained by their mechanism of action in the gut of the host.

The mechanism of action of probiotics is strain-dependent which can be categorized into three modes of action. Firstly, probiotics may affect the host's immune system (generally the gut-associated immune cells and the gut epithelial cells). The adhesion between host immune cells and probiotics leads to immune modulation (Burgain et al., 2011) . Secondly, probiotics possess the ability to compete with the pathogens thus arresting their adherence to the intestine; thirdly, probiotics are capable to alter some host products such as bile salt, food ingredients, and microbial products such as toxins (Frakolaki et al., 2021) . Probiotics also produce metabolites such as amino acids, peptides, and vitamins which regulate the host immune system thus the immune response can challenge the risk of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infections (Koirala & Anal, 2021) .

Several parameters such as oxygen, pH, storage temperature, hydrogen peroxide, and many others affect the viability of probiotics (Reque & Brandelli, 2021) . To improve the resistance against the harsh conditions, different methodologies have been suggested including the use of oxygen-impermeable containers, appropriate selection of acid, and bile resistant strain with their adaptation to different stresses, microencapsulation, and addition of micronutrients such as peptides and amino acids (Sarkar, 2010) . Among the abovementioned methods, microencapsulation is the most preferred method which is the primary consideration of many researchers.

Microencapsulation is a novel preservation method in which probiotic strains are entrapped within a selective supporting membrane to avoid the deterioration of cell mass or cell injury and to achieve a targeted release in the gut in an adequate amount (Ermis, 2021) . The end product of this technology is encapsulated powder which is easier to use and the homogeneity is maintained throughout the process (Mortazavian et al., 2007) . Based on the size of the polymeric beads, cell immobilization by encapsulation techniques can be broadly categorized as macroencapsulation and microencapsulation (John et al., 2011) . The polymeric beads formed by macroencapsulation process range from a few millimeters to centimeters whereas; beads size of 1-1000 μm is produced by the microencapsulation process. Figure 1 shows the size ranges of microcapsules produced by different encapsulation technologies. The microencapsulation process is more advantageous as macroencapsulation results in lower cell viability (Uludag et al., 2000) .

The formed microcapsules are classified as matrix and reservoir types. The dispersion of active agents over the carrier material forms matrix type microcapsule wherein the case of reservoir type, a shell is coated around the core material. Different types of microcapsules viz. core-shell, mononuclear, polynuclear, multilayer, matrix, irregular prepared using various encapsulation methods are shown in Fig. 2 . The encapsulation efficiency is dependent on the survivability of microorganisms and their ability to multiply. The viability of encapsulated probiotic strain depends on the concentration and type of coating material, physicochemical properties of capsules, initial cell number, as well as the type of bacterial strain. The carrier material must be able to protect the encapsulated substances as well as it must be food grade for incorporation in food products. The objective of encapsulation is to protect against adverse conditions and allow the release of viable and metabolically active probiotics in the intestinal part (Picot & Lacroix, 2004) . The microparticle should be water-soluble to maintain the integrity in the upper part of the GI tract as well as in the food matrix with a progressive liberation of the entrapped cells during the passage of the intestinal phase.

Different polymeric materials such as polysaccharides (alginate, starch, chitosan, cellulose acetate phthalate, k-carrageenan, plant gum), protein (gelatin, milk protein), and fat have been incorporated for the development of microparticles. Sodium alginate is a widely used polymer for encapsulation as it forms a nontoxic, biocompatible, and highly versatile matrix for the protection of microorganisms against adverse conditions during processing and storage. The sensitivity of the formed gel by sodium alginate to extreme pH values can affect the protection of encapsulated materials as well as the release of core materials (Mortazavian & Sohrabvandi, 2006) . The application of prebiotics such as Different types of microencapsulation: core-shell microcapsules mononuclear, polynuclear, multilayer microcapsules, matrix, irregular resistant starch in the formulation can overcome this drawback and enhance the stability of probiotic bacterial cells (Chen et al., 2005) . Alginate has been used as a wall material for probiotics due to its sensitivity towards pH (Allan-Wojtas et al., 2008) . Nami et al. (2020) observed that L. lactis encapsulated with alginate, Persian gum, and inulin showed only a 1.46 log CFU/g decrease in viability, while the unencapsulated cells indicated a reduction of 6.52 log CFU/g after 120 min of simulated digestive condition (pH 2.5). Guimarães et al. (2013) encapsulated Bifidobacterium animalis DN-173 010 and L. rhamnosus GG ATCC 53,103 with calcium alginate which showed higher viability (above 5 log CFU/g) while the free cells were found to be nonviable at pH 2.0 and 2.5 after 180 min in a simulated gastric fluid condition. Similarly, gelatin-alginate microspheres provided higher stability of Bifidobacterium adolescentis 15703 T with a 1.21 log CFU/mL decrease in the viability as compared to free cells with a loss of 3.45 log CFU/mL in the harsh environment of gastric conditions (Annan et al., 2008) . Enterococcus faecium MC13 encapsulated with alginate-chitosan capsules showed no release of cells after 144 h in simulated gastric fluid (SGF) condition (Kanmani et al., 2011) . The addition of prebiotics such as galactooligosaccharides enhanced the viability of Bifidobacterium breve cells to 8.0 log CFU/mL in the chitosancoated multiparticulate system added with prebiotic poly(D,Llactic-co-glycolic acid) and showed an improved result over alginate-chitosan microencapsulation system (1.4 log CFU/mL) (Cook et al., 2014) . Thomas et al. (2014) revealed that the strong electrostatic interaction between chitosan and dextran sulfate protected S. boulardii cells at low pH of the gastric condition with higher survivability of 7.19 log CFU/100 mg, where only 4.24 log CFU/100 mg of uncoated cells were survived after 2 h of the exposure period. optimized the shell composition for microencapsulation of probiotic Lactobacillus plantarum as 0.4%, 4.6%, and 8.4% of inulin, dextran, and maltodextrin, respectively, and obtained an encapsulation efficiency of 99.21% as well as the produced microcapsules were highly thermostable. Barajas-Álvarez et al. (2021) observed that gum arabic and trehalose microparticles exhibited greater protection to the encapsulated Lactobacillus rhamnosus with a viability loss of 3.02 log CFU/g, whereas the loss of 6.21 log CFU/g was found for free bacterial cells after 2 h of simulated intestinal conditions. Whey protein is a mixture of globular protein isolated from whey and exhibits a wide opportunity from the point of protection and reversion of the binding of active substances before their targeted release in the host. The high temperature leads to deterioration of probiotic bacteria thus heat-treated, denatured whey proteins have been used to encapsulate probiotics at 35-40 °C (Razavi et al., 2021) . Many current studies illustrated the microencapsulation of probiotics by employing whey protein in the form of whey protein isolate (WPI), whey protein concentrate (WPC), and sweet whey (the product containing both casein and whey protein). Li et al. (2019) encapsulated Lactobacillus casei by using WPI, gellan gum, and cellulose acetate phthalate matrixes and observed the highest viability of probiotics (8.25 log CFU/g) in the WPI matrix as compared to free cells (8.15 log CFU/g) after freeze drying as well as found long term stability of bacteria (7.59 log CFU/g) up to 19 weeks at 4 °C. Loyeau et al. (2018) reported that incorporation of high molecular weight dextran (450 kDa) with WPI as coating materials resulted in only a 0.01 log reduction of viability of probiotic strain Bifidobacterium animalis after spray drying. Similarly, Agudelo-Chaparro et al. (2021) observed improved viability of 8.74 log CFU/g after spray drying of Lactobacillus rhamnosus with WPC, maltodextrin, and trehalose.

Sweet whey behaves as efficient carrier material for probiotics in liquid form and enables the protection of the microbes in the simulated GI condition (De Castro-Cislaghi et al., 2012) . In this study, the viability of free cells of Bifidobacterium animalis decreased by 1.51 log CFU/g whereas, microencapsulated cells with sweet whey showed only 0.73 log CFU/g loss after exposure to pH 2.0 for 3 h. Similarly, at low pH, sweet whey maintained the survival of Lactobacillus acidophilus La-5 but the free cells presented a significant reduction of 3.11 log cycles after 7 h of GI simulation study (Maciel et al., 2014) . Gharibzahedi and Smith (2021) emphasized legume proteins such as soy protein concentrate, soy protein isolate, pea protein concentrate, pea protein isolate, chickpea protein isolate, lentil protein isolate, and faba bean protein isolate as potential and alternative probiotic encapsulants to animal proteins because of their better gel-forming and emulsifying activity, superior solubility properties, and thermal stability. Raddatz et al. (2020) observed that pectin microparticles containing probiotic strain Lactobacillus acidophilus presented higher encapsulation efficiency of 68.1% when prebiotic such as inulin was incorporated in the encapsulation matrix, while the control (pectin alone) exhibited an efficiency of 64.9% after the freeze drying process. Beads made up of sodium alginate and amidated low-methoxyl pectin in the ratios of 1:4 and 1:6 provided improved resistance to the entrapped Lactobacillus casei in simulated gastric and bile salt condition significantly (Sandoval-Castilla et al., 2010) . Moghanjougi et al. (2021) reported that pectin nanoparticles were resistant to both enzymatic and acidic conditions thus the microcapsules could be released in the colon environment, whereas alginate was suitable for encapsulation of probiotic bacteria Lactobacillus acidophilus under acidic conditions due to the conversion into insoluble alginic acid. The coating of whey protein concentrate and pectin did not provide additional protection to the probiotics in simulated GI conditions despite the higher survivability of probiotics (8 log CFU/g) after encapsulation (Gebara et al., 2013) . Application of Hi-maize starch as a protective agent in freeze dried pectin-rice bran capsule entrapped with Lactobacillus plantarum showed the highest survivability (i.e., 8.63 ± 0.01 log CFU/g) as compared to the uncoated ones (5.63 ± 0.02 log CFU/g) after the encapsulation process (Chotiko & Sathivel, 2016) .

Application of resistant starch in microencapsulation technology can solve many technical challenges such as increasing the shelf-life stability of sensitive compounds, improving the thermal stability, as well as controlling the release of bioactive molecules (Mirzaei et al., 2012) . The encapsulation efficiency of probiotics Lactobacillus acidophilus was improved to above 94% by the addition of potato, rice, and maize resistant starch with the control medium comprising of WPC, maltodextrin, and D-mannose which showed a lower efficiency of 79.90% after spray drying (Muhammad et al., 2021) . Co-encapsulation of resistant starch (Hi-maize) of the bacterial cell has been carried out to accomplish the synbiotic approach (Nugent, 2005) . Resistant starch (Hi-maize) at a concentration of 1% provided better protection to L. acidophilus microencapsulated with sodium alginate beads in simulated GI juice. It also preserved the viability of probiotics (6 log CFU/g) up to 135 days of storage period whereas the microcapsules coated only with alginate lost the viability after 60 days of storage (de Araújo Etchepare et al., 2016) . Co-encapsulation of Lactobacillus F19 and Bifidobacterium Bb12 with corn starch in casein-based microcapsules affected the physical barrier of the matrix negatively and resulted in the reduction of protective effect (Heidebach et al., 2010) .

There are some other polymers available for microencapsulation of probiotics which are enlisted in Table 1 with their formations, mechanisms, and barrier properties that will be helpful to researchers for screening and evaluation of protective wall materials.

Sophisticated shell materials and technologies have been developed for the encapsulation of sensitive bioactive compounds with an extremely wide variety of functionalities. The factors affecting the release of encapsulated ingredients are mechanical stress, change in temperature, pH, time, enzymatic activity, osmotic pressure, etc. The innovativeness of microencapsulation technologies is a great benefit to society, which cannot be achieved by the non-encapsulating method so that the consumer can compromise the cost-in-use and also get improved value-added products.

There are many research works and reviews already available on microencapsulation of probiotic bacteria by spray and freeze drying. So, this review paper emphasizes other novel emerging technologies with their application in the controlled release of probiotics as well as improving the storability of microencapsulated particles to develop a comparative study by considering their merits and demerits.

Vacuum drying is similar to freeze drying with a difference in the removal of water vapor through the evaporation process rather than sublimation. Generally, vacuum dryers operate at a higher temperature and higher pressure (above 10 mbar) as compared to freeze dryers but the process parameters are lower than spray drying. Loss of viability of heat-sensitive probiotics is less in vacuum drying as the process can handle the thermal stress gently. Oxygen-sensitive probiotics such as Bifidobacteria can be effectively handled by this drying process but severe viability loss can also be happened due to dehydration stress. Cell wall and cell membrane of vacuum dried cells are two main sites of damage that have been observed by atomic force microscopy and Fourier transform infrared spectroscopy (Santivarangkna et al., 2007) . From the point of targeting to the cellular membrane, the process parameters should be optimized to improve cell viability and preserve the probiotics from dehydration stress. There are many possible ways to improve the viability such as alteration of process parameters, the addition of protecting agents, or pre-treatment of cells with sub-lethal stress before vacuum drying.

The application of protective agents such as sugars or polyalcohol is beneficial for bacterial viability. Different sugars such as trehalose, lactose, and polyalcohol such as sorbitol have been used in the vacuum drying of probiotics (Crowe, 2007; Foerst et al., 2012) . With the addition of 25% (w/w) of trehalose or sorbitol, the survivability of vacuum dried L. paracasei enhanced from 29 to 70% and 54%, respectively . Conrad et al. (2000) studied vacuum dried L. acidophilus strain with the addition of 20% (w/w) trehalose. The survivability increased from 18.9% to 37.9% within 4 days at room temperature. Santivarangkna et al. (2007) revealed that the viability of L. helveticus WS1032 was doubled by the addition of 1% (w/w) sorbitol to the cell suspension after vacuum drying and there was a negative correlation between the additions of protectant from 10 to 100% (w/w) and probiotic viability. It has been studied that by increasing the concentrations of trehalose from 50 to 250 mM, the viability increased whereas, the survivability showed the lower value at a higher concentration of trehalose due to an increase in an osmotic gradient (Gómez Zavaglia et al., 2003) .

Bacterial viability and water activity were greatly influenced by the process parameters of vacuum dryers such as drying time and temperature. Chances of bacterial damage Ananta et al. (2005) can be prevented by shortening the processing time as well as the temperature. Tymczyszyn et al. (2008) observed an increase in the damage of the cell membrane and decreasing in water activity, which was due to an increase in temperature from 30 to 70 °C in the vacuum drying of L. delbrueckii subsp. bulgaricus CIDCA333. A similar trend was observed with an increase in treatment time at a particular temperature. The viability of L. helveticus WS1032 during vacuum drying and after 12 h of the storage period sharply declined due to rupture on the cell surface as well as cell lysis (Santivarangkna et al., 2006) . The survival rate of L. plantarum CIF17AN2 was higher at 4 mbar pressure and 57 °C temperature up to 12 h drying time. Thermal damage of probiotic cells can be avoided by reducing the vacuum pressure and the viability can be enhanced with the addition of glycerol . Freeze drying has been proved better than vacuum drying from the point of attaining high survivability of probiotic strains, so fewer research papers are available on vacuum drying.

Fluidized bed drying is a process involving the application of conditioned air usually heated gas passed through a suspended bed of solid particles at a controlled velocity. The problems arise in the drying of the bacterial cell due to its relatively small size (several micrometers). It is difficult to keep the dried particles of low density in the suspended state which may result in a lowering of yield. Moreover, it is better to combine the fluidized-bed drying with other techniques such as spray drying or freeze drying. However, this technique is a preferred encapsulating method due to the formulated probiotics of reduced moisture content.

In the fluidized bed drying method, different carrier or matrix molecules such as casein, cellulose, maltodextrin, NaCl particles, or lactose have been used for encapsulation of probiotics (Bensch et al., 2014; Mille et al., 2004) . This drying method involves the spraying of bacterial cell suspension on the fluidized bed carrier followed by spray or freeze drying to obtain bacterial pallets and subsequently, encapsulation of the particles with the protective carrier or shells by fluidized bed drying to enhance the cell viability (Azim et al., 2012) . To improve the storability in the long term, the probiotic cells are encapsulated with different materials such as fats, proteins, or polysaccharides as coating agents. The coating layer protects the encapsulated probiotic cell by minimizing moisture diffusion over the storage period. This method has rarely been used for encapsulation of probiotics but the produced powder exhibits lower cohesiveness thereby improving higher flowability, which is the main advantage of this technique.

The viability of probiotics is influenced by the selection of protectants and controlling the process parameters as well Gao et al. (2004) as the stress response of bacterial cells before drying. Different protectants such as saccharides, skim milk, or alginate matrix have been used with probiotics in fluidized bed drying. Wu et al. (2021) optimized top fluidized bed drying conditions to encapsulate probiotic culture Lactobacillus brevis RK03 and found that the highest survival of 95% was found at the processing time of 40 min at 50 °C by employing casein and whey protein isolate (5% w/v) as carrier materials. Strasser et al. (2009) studied the survivability of L. plantarum IFA No. 278 by adding glucose, sucrose, trehalose, or maltodextrin (32% w/v) and the protectants enhanced viability more than 5 times whereas; the survivability is reduced to 0.2% without any protectants. The addition of trehalose and sucrose (32% w/v) enhanced the survivability to 36.9 and 36.4%, respectively. The probiotic strain L. helveticus CNRZ 303 encapsulated in alginate beads showed the highest viability of 70.7% with the addition of reconstituted nonfat milk solids as compared to 0.5 M odonitol and glycerol (Selmer-Olsen et al., 1999) . Enterococcus faecium IFA No. 278 had lower survivability (11%) without any application of protective carriers during the drying process (Strasser et al., 2009 ). The addition of sucrose or skim milk (10% w/w) resulted in no increase in survivability of E. faecium M74 as compared to the unencapsulated cells (Stummer et al., 2012) . Controlling process parameters is a considerable aspect of improving the survivability of probiotic cells. Fluidized bed drying influences the moisture level of the dried product. During the drying process, when the moisture level is above 15%, the drying temperatures have no significant impact on the survivability of probiotics (Bayrock & Ingledew, 1997) . Other parameters such as water activity, atomizing air pressure as well as spraying time greatly influence the survivability of the encapsulated bacteria. There were 4 log units of viability loss of E. Faecium M74 when the spray time and pressure were increased above 30 min and 1.5 bar, respectively (Stummer et al., 2012) . Some other parameters such as loading rate, hot air humidity, and temperature have been taken into considerations by analyzing the heat and mass transfer and applying different mathematical and empirical models (Akbari et al., 2012; Debaste et al., 2008) . The prestressing of probiotics has been proved beneficial from the point of enhancing survivability. The probiotic L. casei CRL 431 cells were stressed osmotically and showed better survivability after fluidized bed drying as compared to unstressed cells (Nag & Das, 2013) .

Higher temperature causes a higher declination in the survival rate of entrapped microbial cells during the storage period. When dried E. faecium IFA No. 278 and L. plantarum IFA No. 045 powder were stored at 4 °C the survival rate was higher as compared to the storage temperature of 22 and 35 °C (Strasser et al., 2009 ). The increased storage temperature of 20 °C resulted in a greater reduction of viability of L. plantarum than 4 °C during the storage period of 3 months (Bensch et al., 2014) . It has been observed that vitamin E has a crucial role in enhancing the stability of probiotics from oxidative damage. L. casei CRC 431 maintained its stability during the storage period of 20 weeks at a temperature of 25 °C with the addition of 0.5% (w/w) vitamin E (Nag & Das, 2013) . Rehydration temperature is a critical index from the point of recovery of probiotics. It has been observed that a higher rehydration temperature causes better recovery. For example, dried L. helveticus CNRZ 303 showed higher recovery at temperatures of 20 and 30 °C as compared to the temperature of 5 °C, and higher rehydration temperature (30-37 °C) showed better results in terms of improving the survivability of probiotic strains L. bulgaricus RD 546 and L. plantarum RD 263 (Mille et al., 2004; Selmer-Olsen et al., 1999) .

An efficient and effective dehydration method is required for successfully balancing between physiological activity and higher cell viability of dried cultures. The oxidative potential at minimal pressure levels and low dehydration temperature in freeze dryer leads to instant rehydration capacity and high survivability of probiotic cells as well as provides the favorable application of microorganisms in food industries (Bozoǧlu et al., 1987) . At the same time, the cost of freezing equipment causes an increase in the cost of the drying process. In contrast, to freeze drying, vacuum drying results in dried starter cultures with improved storability . The freeze and vacuum drying methods are timeconsuming processes, which limits the throughput capacity and ultimately results in high production costs.

Microwave (MW) energy could help in lowering production costs by significantly shortening the drying time. The availability of microwave radiation to penetrate the product of its whole volume (i.e., volumetric heating) and to heat evenly depends on the geometry and composition of the exposed product. Due to internal heat generation, drying rates become higher which leads to a shortening of drying times (Ambros et al., 2018a, b, c) . As opposed to conventional drying methods, drying of microcapsules by microwave radiation results in the generation of inverse thermal gradient that favors the drying of particles from inside out and fast elimination of water which involves much lower temperature and processing time (Mardaras et al., 2021) . Nevertheless, microwave radiation might be harmful to probiotics during encapsulation if the processing conditions are not optimized properly (Yoha et al., 2021) . The higher processing time and product temperature cause product degradation and loss of bioactivity. Therefore, the short drying time and low product temperature should be targeted to prevent the deterioration of bacterial cells. The effect of microwave energy on the survival of bacteria culture is scanty in literature. However, some authors mentioned that instead of continuous, intermittent application of microwave energy in pulsed mode improved the product quality and enhanced energy efficiency (Ambros et al., 2018a, b, c) . Different researchers applied microwave coupled with other drying techniques such as vacuum and freeze drying to lower the processing time thus preserving the viability of encapsulated probiotics (Ambros et al., 2018a, b, c) . In vacuum drying, the heat transfer rate from hot shelves to the product is low due to the lower conduction of heat in vacuum conditions which increases the drying time, whereas microwave energy targets the water molecules directly due to dipolar rotation and ionic interaction. This accelerates the drying process. Combining the microwave energy with a vacuum drying process can shorten the drying time considerably (Karimi, 2010) . Microwave combined with vacuum drying caused energy reduction (32-71%) as well as decreased drying time (25-90%) as compared to conventional drying (Duan et al., 2010; Durance & Wang, 2002; Sharma & Prasad, 2006; Varith et al., 2007) . Microwave energy can be assisted with freeze drying process to give an energy-efficient output (Ambros et al., 2018a, b, c) . The microwave-freeze drying process is similar to the conventional lyophilization process in which frozen water is removed by the sublimation process from the product and microwave vacuum drying is working on the same principle as a conventional vacuum drying method. The major difference is the source of energy supply as in the microwave heating process, electromagnetic energy is converted to heat energy (Haghi & Amanifard, 2008) , and removal of water, as well as the transportation of energy, is not affected by heat conductivity barriers (Bouraoui et al., 1994) . The microwave-freeze drying maintains the product structure during the entire process by drying in the frozen state. Initially, as the water is present in the frozen state, the resulting structure contains pores after the drying process. After rehydration, the water occupies the pore space instantly and resolves the bacterial cultures leading to the instant character. The microwave-assisted with freeze drying process reduces the time to 50-75% as that of the conventional freeze drying process due to the improved heat and mass transfer (Ambros et al., 2018a, b, c) .

The overheating or nonhomogeneous heating of the material and degradation or loss of the bioactivity of probiotics depends on the processing temperature and time of microwave heating (Wang et al., 2014) . To avoid the deterioration of bacterial cells, low product temperature, as well as short drying times should be targeted (Bauer et al., 2013) . Ahmad et al. (2012) observed that the viability of probiotic strain Lactobacillus salivarius 417 was improved when exposed to lower microwave power input and absolute pressure levels; however, the application of skim milk powder as a protectant affected the survivability. Microwaves used in pulse mode enhanced the efficiency of input energy levels as well as the quality of the exposed product (Gunasekaran & Yang, 2007) . Kim et al. (1997) studied the D-value for a mixture (1:1) of Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus salivarius subsp. thermophilus by taking different temperatures and water activities. This study concluded that microwave-vacuum dried yogurt showed higher survivability as compared to spray and freeze dried samples and survival rates declined when dehydration temperature increased. Ambros et al. (2018a, b, c) tested the microwave-vacuum drying process for high retention of bioactivity of the bacterial strain, Lactobacillus paracasei subsp. paracasei by considering three parameters such as chamber pressure, microwave power level, and minimum product temperature. The study concluded that drying time and microwave efficiency were not affected significantly by the maximum product temperature and vacuum pressure level, but both parameters greatly affected the survival rate of the probiotic strain. The authors observed that microwave power levels between 2 and 3 W/g, a low chamber pressure of 7 mbar with the product surface temperature of 35 °C were found to be most suitable for retention of the viability of probiotics as the low chamber pressure reduced the absorption of microwave energy but power level above 4 W/g resulted in overheating of the product.

The survivability of Lactobacillus paracasei F19 was maintained (67 to nearly 100%) at all microwave-freeze drying conditions whereas, the highest survivability of B. lactis (almost 100%) was observed at lower microwave power input and chamber pressure combination (i.e., 1.5 W/g and 0.6 mbar) with the reduced drying time (up to 80%) as compared to freeze drying process (Ambros et al., 2018a, b, c) . In this study, the authors applied microwave energy in pulsed mode when the drying temperature exceeded 30 °C to avoid further increase in the product temperature and thermal shock to microorganisms and also highlighted that the low chamber pressure maintained the membrane integrity and viability of cells as high pressure resulted in higher drying rates, thus internal thermal stress due to the higher dielectric loss factor and ultimately overheating of products. Mardaras et al. (2021) reported that near fluidizing microwave drying technique with adequate control of process temperatures resulted in the viability of more than 90% for yeast cells Saccharomyces cerivisae encapsulated in alginate microcapsules and recommended an inside microcapsule temperature of 30 °C and air temperature of 5-20 °C to protect the probiotics as well as to achieve a good-quality product.

The spray cooling/chilling process is mainly used for the entrapment of textural ingredients, flavors, enzymes, and other functional ingredients by targeting a lot of benefits such as improving the heat stability, conversion of a liquid hydrophilic ingredient into free-flowing powder, and delaying the release in a wet environment. This encapsulation technology is the least inexpensive method typically referred to as a "matrix" type method. In the matrix encapsulation process, the coated material generally releases the whole of the content within a short period after incorporation in the foodstuffs. There are few works of literature available regarding the thermal stability of enzymes by spray cooling method. Due to the presence of active ingredients at the surface of microcapsules, there is a direct assessment of the exposed environment. Therefore, when the microencapsulated material comes in contact with the foodstuffs, the release of active ingredients begins. The factors such as osmotic forces, diffusion of water through the shell material, and mechanical dispersion play a significant role in the release mechanism. The spray chilling process is comparable with the freeze drying process from the point of achieving similar encapsulation efficiency due to the effect of lower temperatures with a lower operating cost (Dianawati et al., 2013) .

Though there is a process similarity between spray chilling and spray drying, the major difference lies in the atomization of the coating material. The matrix suspension is injected into a chamber in which the chilled air comes in contact with the droplets and the solidified droplets form the microcapsules with probiotics as core material (Chambi et al., 2008) . The solution of wall material is a major influencing factor for encapsulating active ingredients by the spray chilling process. Protein-or carbohydratebased hydrophilic wall materials are generally employed for microencapsulation in spray and freeze drying technology (Dianawati et al., 2016) while fat-based hydrophobic materials such as fatty acid, phospholipids, fatty alcohols, hydrogenated fat, polyethylene glycol, waxes, triacylglycerol, and their mixture are commonly employed in spray chilling process (Chambi et al., 2008; Sillick & Gregson, 2012) .

Spray chilling technology has been applied to microencapsulate different probiotic strains for improving viability. This technique was applied to encapsulate different bacterial cells such as Bifidobacterium bifidum, Lactobacillus acidophilus, and Saccharomyces boulardii in a single and double layer with the addition of hydrogenated palm oil. Single-layered microcapsules showed better survivability of strain; however, microcapsules showed lower resistance in simulated intestinal conditions as compared to spray dried microcapsules (Arslan-Tontul & Erbas, 2017) . Application of vegetable fat as carrier material can be considered in spray chilling technology for better protection, application, and delivery of probiotic strains such as Bifidobacterium lactis and Lactobacillus acidophilus (de Lara Pedroso et al., 2012) . This study resulted in improved resistance and stability of probiotic strain not only in simulated gastric conditions but also in 90 days of prolonged storage period. Similarly, the efficacy of solid-lipid microparticles entrapped with Lactobacillus acidophilus produced by spray cooling method with the addition of prebiotics was evaluated (Okuro et al., 2013) . Polydextrose was found to be an effective prebiotic for the protection and delivery of probiotics with the benefits of the synbiotic effect. Spray chilling technique produced microencapsulated powders of lower moisture content and water activity along with smooth and continuous spherical particle-containing probiotics Bifidobacterium animalis subsp. lactis and Lactobacillus acidophilus and this method increased the potentiality for the incorporation of strains into savory cereal bars (Bampi et al., 2016) . Similarly, cocoa butter as a carrier material improved the resistance of probiotic strain Lactobacillus acidophilus by the spray chilling method in GI fluid conditions. The microcapsules produced by this technique showed higher stability up to 90 days of storage period (Pedroso et al., 2013) .

This is an advanced method of encapsulation of probiotics that involves the processing steps of both spray and freeze drying. The probiotic solution is atomized into a container containing cryogenic liquid (generally liquid nitrogen) and frozen droplets are formed in the cold vapor phase which is further dried by freeze drying process to produce dried encapsulated powder (Amin et al., 2020) . This process is advantageous due to the formation of microcapsules of a larger specific area and controlled size than spray dried microcapsules and the coating of additional shell materials protects the core ingredients against the adverse conditions (Semyonov et al., 2010) . This process consumes high energy due to the long processing time with a requirement of high-cost (30 to 50 times expensive than spray drying), so it is lagging behind conventional spray and freeze drying (Zuidam & Shimoni, 2010) .

Maltodextrin as a wall matrix helps in minimizing the mobility of probiotic strains in the glassy state (Semyonov et al., 2010) . Different cryoprotectants such as trehalose act as a protective agent for improving the cell viability during freezing and enhancing the storability of dried bacteria. Trehalose prevents structural damage during dehydration by forming hydrogen bonds with the polar head groups of the lipid cellular membrane. In general studies, entrapment of probiotic bacteria in a gel matrix of gellan, alginate, xanthan, and k-carrageenan is a common process for encapsulation, which is then followed by extrusion and emulsion process to form droplets of the desired size. The stabilization of probiotics within gel beads may satisfy the desired output but it is difficult to scale up. From this point of view, the extension of the storage life of microcapsules should also be taken into account. The spray freeze drying method has been popularized in the pharmaceutical industry (Costantino et al., 2000) . The particles formed by this method retain spherical shape as well it shows the porous morphology. The spray freeze drying method has been employed to minimize the irreversible damage to proteins such as aggregation and denaturation (Heller et al., 1997) . In spray freeze drying, cooling rates are an important point that should be taken into consideration. It has been calculated that the upper limit of the cooling rate is in the order of 300 K/s (Heller et al., 1999) . There are limited research works available to dry the probiotic cells by using spray freeze drying technology. Her et al. (2015) prepared probiotic powder of Lactobacillus casei IFO 15,883 by spray freeze drying technique. The viability of probiotics after spray freeze drying was found to be 97.7% under optimized conditions. Trehalose as carrier material was applied to encapsulate Lactobacillus paracasei by spray freeze drying and proved as highly effective from the point of increasing the viability (> 60%) of probiotics (Semyonov et al., 2010) .

This is a dry technique to encapsulate probiotics, which comprises a stator, rotor with six blades rotating at high speed, and a power recirculation unit. Inside the vessel, a stream of air is generated due to the high-speed rotating blades that give high impaction to the powder mixture consisting of the host and guest particles. The guest particles are coated on host particles which form an ordered mixture that minimizes the chances of thermal damage of probiotics due to the cooling effect of air (Ishizaka et al., 1993) . Different prebiotics have been tested for double microencapsulation of probiotics such as lactulose, sorbitol, mannitol, inulin, xylitol, raffinose, and fructooligosaccharide by utilizing hybridization technique to provide beneficiary effects to the host (Ann et al., 2007) . Microencapsulated Lactobacillus acidophilus ATCC 43,121 prepared by hybridization technique showed prolonged stability as compared to uncoated and single-coated ones when exposed to the acidic or heating condition.

This technique has been developed to overcome the damage associated with heat or solvent liable probiotics and has a large throughput capacity. This method requires two separate aerosols, i.e., alginate solution with microbial suspension and another is calcium chloride solution to produce microbeads of a diameter of fewer than 40 μm by the crosslinking process (Sohail et al., 2011) . The water-insoluble microbeads could be subsequently sprayed or freeze dried. Sohail et al. (2012) produced alginate microbeads with sizes ranging between 10 and 40 μm containing Lactobacillus acidophilus NCFM and Lactobacillus rhamnosus GG by the dual aerosol method. The encapsulated probiotics did not show a significant increase in viability at the temperature of 4 and 25 °C but this technique reduced the acidification at both the temperatures and prevented the declination in sensory properties as well as improved the storability of orange and other fruit-based juice products. This is an indication of the absence of the buffering capacity of encapsulating material. However, some studies showed acidification in encapsulated probiotic fruit-based products, which might be due to diffusion of sugar components through polymeric coating material that further metabolizes into organic acid in small size microbeads. The macrobeads (approximately 2 mm diameter) produced by extrusion technique provided better protection to encapsulated probiotics than microbeads (10-40 μm) in high acid and bile salt condition but both the techniques offered comparable results which might be due to chitosan coating of the porous alginate gel matrix as a result of controlling diffusion in the acidic condition (Sohail et al., 2011) .

In recent years, ultrasonication has been used to encapsulate bioactive compounds in food processing (Leong et al., 2017a, b) . Encapsulation using ultrasound has the potential to be operated at large scales with a low cost per unit operation and is capable of making nano and microcapsules/droplets with a narrow size distribution (Leong et al., 2018 (Leong et al., , 2017a . Ultrasound frequency of 16 to 3000 kHz is generally suitable for the processing of fluids. Ultrasound passes through liquid medium and cavitation bubbles are generated and collapsed which produces strong shear and mechanical forces resulting in droplet or capsules formation (Fig. 3) . Double emulsions were prepared in skim milk using a 20 kHz horn-type ultrasound probe. Flaxseed oil (7-21%) was incorporated in skim milk using low frequency (20 kHz) ultrasound microencapsulated insulin using w/o/w double emulsion via ultrasonication (Mutaliyeva et al., 2017; Shanmugam & Ashokkumar, 2014) . The capsules were prepared with shell material chitosan and xanthan gum complexes to preserve insulin stability and biological activity. Also, water-in-oil-in-water emulsions by low-frequency ultrasound (20 kHz) were prepared using skim milk and sunflower oil with a low amount of surfactant (Leong et al., 2017a, b) . Della Porta et al. (2012) successfully encapsulated Lactobacillus acidophilus in double emulsion using sonication followed by the preparation of microspheres using supercritical emulsion extraction (SEE) technology with 80% encapsulation efficiency. prepared double emulsion (W1/O/W2) microcapsules containing probiotic Lactobacillus plantarum by a two-step ultrasonication process by employing dextran and whey protein as encapsulating material and observed that the viability of bacteria remained stable (> 10 9 CFU/mL) up to the treatment time of 200 s.

The optimization of process conditions of different technologies has been briefly represented in Table 2 from the point of characterization of microcapsules and viability of probiotics which is a compilation of recent research studies of individual technologies.

Advantages and disadvantages of microencapsulation technologies.

• Convective hot air drying: In this method, the direct exposure of droplet containing probiotic cells to hot air results in cell rupture, lipid oxidation, and shrinkage that ultimately causes a decrease in the cell viability but the operational cost is five times lesser than freeze drying process (Ermis, 2021 ). • Spray drying: This single unit process is the most economic (approximately 10 times cheaper than freeze drying) with high-throughput capacity and easy to scale up as well as the produced dried microcapsules of higher stability and lower bulk density highlight the wider applicability of the process but the higher inlet temperatures and the exposure of cells to extreme osmotic stress during drying lead to lower survival of probiotics, poor stability during storage (Her et al., 2015) . This process produces water-soluble microparticles which may result in an early release of probiotics (Frakolaki et al., 2021 ). • Freeze drying: This method is suitable for encapsulation of heat-sensitive bacterial strains, and the freeze dried capsules are well stable but need lower storage temperature or an inert atmosphere however the longer processing time, higher operating cost, and the negative effect on cellular lipid membrane as well as cell proteins limit the application (Nag & Das, 2013 ). • Vacuum drying: This method provides a higher drying rate, lower drying temperature and reduced oxygen concentration under vacuum conditions, and higher viability of probiotic cells as compared to conventional hot air drying (Ermis, 2021) . However, the dried product might have shrinkage, denser structure, poor rehy-dration, and the loss of instant character of probiotics in the food matrix limit its industrial application (Ambros et al., 2018a, b, c) . • Fluidized bed drying: This process provides uniform drying with provisions for controlling the temperature and is suitable for encapsulation of probiotics along with multilayer coating of core substances, easy to scale up at comparatively lower processing cost but this technology is difficult to master and requires longer processing time (Martín et al., 2015) . • Microwave drying: Opposite to convection air drying, drying of microcapsules by microwave radiation results in the generation of inverse thermal gradient that favors the drying of particles from inside out and fast elimination of water which involves much lower temperature and processing time (Mardaras et al., 2021) . Nevertheless, microwave radiation might be harmful to probiotics during encapsulation if the processing conditions are not optimized properly (Yoha et al., 2021) . The higher processing time and product temperature cause product degradation and loss of bioactivity. Different researchers applied microwave coupled with other drying techniques such as vacuum and freeze drying to lower the processing time thus preserving the viability of encapsulated probiotics Ambros et al. (2018a, b, c) . • Spray cooling/chilling: This technique is the least expensive method and has broad applicability at the industrial level due to higher yield, a wider range of materials used as coating ingredients, production of smaller beads as well as lower processing temperature that eliminates lethality of cells (Pedroso et al., 2013) . The size and morphology of produced beads facilitate their incorporation into food products without any negative effect on textural properties (Martín et al., 2015) . This method results in lower encapsulation efficiency which is due to the direct exposure of bacterial cells to the outer environment and requires special attention during handling and storage of encapsulated microparticles (Kailasapathy et al., 2008) . • Spray freeze drying: This is an advantageous process for providing controlled capsule size and larger specific surface area with shorter processing time than spray and freeze drying but this process consumes 30-50 times higher energy than spray drying (Burgain et al., 2011 ). • Extrusion: The advantages of extrusion technology are low cost, simplicity in operation, and mild processing conditions result in higher viability of probiotics however it involves a few demerits such as difficulty in scaling up of the process, inefficient to produce microsphere less than 500 μm due to clogging of the orifice, and the produced microspheres showed lower long term stability (Rathore et al., 2013) . • Emulsification: This technique produces microspheres with a wide shape and size range even below 300 μm as well as offers higher cell viability and can easily be applied at the industrial level but the residues of organic solvent or oil left on the surface of particle that may be toxic to probiotic cells limit the application of the process (Frakolaki et al., 2021) . • Coacervation: This process provides higher encapsulation efficiency, high-throughput capacity, and controlled release properties of microcapsules, but the process is complex, expensive, and difficult to scale up (Chávarri et al., 2010) . • Electrospraying: This method is cost-effective, adaptable along with the strong electrical field strength has no negative impact on bacterial cells thus providing high encapsulation efficiency and controlled release of core ingredients as well as can produce capsules in nanosize range (1-1000 nm) (López-Rubio et al., 2012) . However, the dripping of the solution may occur if the conditions are not optimized well (Gomez-Mascaraque et al., 2016). • Hybridization system: This process is advantageous as compared to spray drying for achieving higher microencapsulation efficiency by minimizing the heat stress by reducing the temperature below 30 °C (Ann et al., 2007) . In this method, the single coating of encapsulated capsules might not provide adequate protection to probiotics in gastric conditions but the double-coated microencapsulated matrix could overcome this limitation (Ann et al., 2007) . • Impinging aerosol technology: This process can be operated continuously, has a higher production yield that results in small particle size products, and is suitable for heat-sensitive materials such as microbial cells (Sohail et al., 2012) . The produced microparticles may result in acidification when incorporated in fruit juices thus there is a need for the selection of suitable polymeric coating materials for the encapsulation of probiotics (Sohail et al., 2011 ). • Ultrasonication: Ultrasonication is an emerging technology in encapsulating both hydrophilic and lipophilic substances in food and therapeutic products. It can produce stable microbubbles having small droplets with a narrow size distribution with low cost and energy consumption (Cavalieri et al., 2011) . Microcapsules can be prepared using less surfactant or no surfactant. However, the high shear force produced during ultrasonication can have a negative effect on the bacteria (Ashokkumar, 2015) . Thus, ultrasonication parameters (ultrasonication power, time) need to be optimized before use .

The residual moisture content of microencapsulated powder is an important parameter to affect the survivability of probiotics. The variability of moisture content depends on the type of carrier medium used and microencapsulation technology applied, which ultimately affects the hygroscopicity of the product and molecular mobility of probiotics (Hoobin et al., 2013) . The microcapsules having a desirable moisture content in the range of 2.8-5.6% inhibit the deteriorative biochemical reactions thus improving the stability of probiotics in dried powder (Dianawati et al., 2013; Khem et al., 2016) . The residual moisture content and hygroscopicity of the microencapsulated powder containing probiotics were influenced by the hygroscopic property of polysaccharide-based carrier medium after drying and storage period (Muhammad et al., 2017) . Generally, higher moisture content has been observed in spray dried protein and polysaccharide-based products (Shrestha et al., 2008) . The improved shelf life of powder was obtained by minimizing the residual moisture content below 5% (Ananta et al., 2005) . The viability of probiotics is affected by both very low and too high moisture contents as the elimination of whole residual water resulted in damage to cellular protein due to over-drying (Zayed & Roos, 2004) . In contrast, higher cellular water content caused declination of acidification activity, severe membrane damage, and cell death (Passot et al., 2012) . Persian gum (PG) has lower moisture retention capacity and prevents the deterioration of probiotics during excess drying. Microencapsulation of probiotics Lactobacillus reuteri by fluidized bed drying with shellac and sweet whey produced microcapsules of 1.35 to 2.00% moisture content with no degradation of the bacterial viability (Schell & Beermann, 2014) . The layer of trehalose and maltodextrin protected encapsulated bacteria Lactobacillus paracasei by raising the solid concentration and lowering the freezing rate (Semyonov et al., 2010) .

Water activity is a critical parameter for affecting the longterm stability of the microencapsulated probiotics. It has been reported that water activity lower than 0.3 is desirable for maintaining the viability and storability of encapsulated probiotics (Tonon et al., 2009) . Such lower water activity is required to achieve desired handling properties such as high flowability with lower stickiness and agglomeration in spray dried powder (Behboudi-Jobbehdar et al., 2013) . Freeze dried samples resulted in lower water activity of 0.052-0.072 due to the effect of a higher vacuum gradient (Moayyedi et al., 2018) . It has been observed that lower a w was achieved for spray dried powder with a higher inlet temperature (Behboudi-Jobbehdar et al., 2013) . Spray dried powder was reported with lower a w (0.53) as compared to spray chilled powder (0.83) (Arslan-Tontul & Erbas, 2017) . The lowest a w was observed with pectin as wall material when L. plantarum was encapsulated by spray drying, as compared to potato resistant starch and potassium alginate (Muhammad et al., 2017) . Hydrophilic and hydrophobic properties of wall material also affect the residual a w of microcapsules as free water is easily released due to the low water-binding capacity of hydrophobic wall materials (Avila-Reyes, Garcia-Suarez, Jiménez, San Martín-Gonzalez, & Bello-Perez, 2014) .

Glass transition temperature (T g ) indicates the phase transition of polymeric material from a glassy state to a rubbery state. The molecular weight, moisture content, and chemical structure of the material affect its glass transition temperature. It possesses great significance during the spray drying process and it is directly linked by the primal properties of products such as the variation in textural and rehydration ability, caking stability, adhesiveness, controlling biochemical reactions like enzymatic reaction, color, and textural modification during storage . The lowering of T g prevents the leakage of the cell membrane during phase transition and maintains the membrane structure in a crystalline state during the drying process. The variation in T g depends on residual water content and both are negatively correlated. The storage stability of probiotics is greatly influenced by this temperature. The molecular mobility is restricted in the glassy state matrix that ultimately lowers the rate of various detrimental processes and resulted in the long-term preservation of probiotics (Broeckx et al., 2016; Roos, 2002) . Application of low molecular weight disaccharides such as trehalose as coating material avoids the problem of increasing the stress on immobilized probiotics by minimizing the size of crystal in the inter-membrane space and maintaining the integrity of the lipid membrane (Koster et al., 2000) . Coating materials play an important role in controlling the moisture content, thereby glass transition temperature as trehalose and maltodextrin possess the ability to form a glass matrix (Semyonov et al., 2010) . Potato-resistant starch contains higher amylose content that results in high crystallinity (35-38%) (Xu et al., 2013) . Trehalose has a lower molecular weight thus lower T g than maltodextrin, so more effective for preserving probiotics during the freezing stages (Semyonov et al., 2010) .

Stickiness is also a primary characteristic of powder which affects the yield and applicability in processing. This property develops during spray drying if the outlet air temperature reaches 10 °C higher than the T g of disaccharides such as sucrose and lactose (Vega & Roos, 2006) . The applicability of mannitol, dextran, and inulin as wall material has been limited due to sticky powder and lower yields (Broeckx et al., 2017) . The introduction of high molecular weight carrier polymers can overcome the stickiness problem by altering the glass transition temperature during spray drying. The usage of whey proteins results in lower aggregation of samples as compared to Persian gum (Adhikari et al., 2009) . Fluidized bed drying produces dry microcapsular powder with good handling characteristics as compared to freeze drying (Albadran et al., 2015) .

The processability, flowability, and physicochemical characteristics of microencapsulated powder are influenced by their morphological behavior. The incorporation of sugars in the drying medium caused an increase in the concentration, thereby viscosity of solution resulting in particles with a smoother surface (Paramita et al., 2010) , and drying of individual droplets resulted in the accelerated skin or crust formation (Kim et al., 2009) . Application of pectin produced microcapsules with a smoother surface than other polysaccharide-based microcapsules (Chan et al., 2011) , whereas wrinkle and irregular ellipsoidal shapes were observed in potato resistant coated microcapsules (Xu et al., 2013) . While potassium alginate resulted in a rough and shriveled surface due to the rapid removal of moisture during spray drying (Mokarram et al., 2009 ). Spray dried sample was characterized by spherical aggregates in the presence of concavities without any mechanical fissures due to the sharp loss of moisture . Rodríguez-Huezo et al. (2007) reported that the operation at an inlet drying temperature of 140 °C could produce concavities in spray dried powder with a higher shielding effect against solute diffusion and mechanical fracture. D' Alessandro et al. (2021) reported that the increase in the protein ratio in the composition of coating materials could minimize the concavities and shrinkage of spray dried particles, consequently preventing the structural disruption and also observed that the presence of soy protein in wall material prevented the roughness of particles which could be advantageous for consumer preference when incorporating the microcapsules in food matrices. Gum Arabic powder particles exhibited both shrinkage and smoothness on the spherically shaped surface than maltodextrin powders (Reyes et al., 2018) . The larger and smaller size of microcapsules produced with higher solution feed rate and airflow rate, respectively, and airflow rate had a greater impact on the size of microcapsules than the solution flow rate during spray freeze drying (Semyonov et al., 2010) . Spray freeze drying produced powders with a highly porous surface with smaller particles than the freeze drying method and also showed its utility in the food processing industry (Her et al., 2015) . Vacuum drying resulted in lower survivability of probiotics and rehydrability of powder than freeze drying as it was more prone to mechanical ruptures due to the compactness of cells, as well as samples produced by freeze drying and microwave freeze drying, were porous and fragile structured of size ranging between 5 and 200 μm (Ambros et al., 2018a, b, c) . Electrospraying produced more spherical microcapsules as compared to spray and freeze drying, in which the solvent used affected the morphology of microcapsules by altering the viscosity and surface tension of the matrix solution (Gomez-Mascaraque et al., 2016) . The freeze dried capsules were more fragile and less robust than fluid bed dried capsules, which indicated the industrial application of fluidized bed drying (Albadran et al., 2015) . The microcapsules with a single layer of fructooligosaccharide (FOS) appeared as a rounded shape with some concavities on the surface, whereas a single layer of lactulose displayed irregular surfaces with convex lattices during the hybridization system (Ann et al., 2007) .

The addition of oligofructose enriched inulin enhanced the thermal resistance of the Bifidobacterium BB-12 during spray drying (Fritzen-Freire et al., 2013) and flaxseed mucilage at 0.2% w/v acted as thermoprotectant for spray dried Lactobacillus acidophilus La-05 (Bustamante et al., 2015) . Rama et al. (2020) reported that bovine cheese whey as coating material protected the encapsulated probiotic strain Lactobacillus paracasei better than ricotta whey during spray drying. The authors stated that the higher protein content in bovine cheese whey resulted in better thermal stability to encapsulated probiotics. The protein structure unfolds due to the high temperature of spray drying which causes the free carboxylic and amino groups of denatured protein available for reaction, increasing hydrophobic forces, hydrogen, and sulfide bonds resulting in aggregation, coagulation, and precipitation. This phenomenon creates microparticles capable of preventing the loss of encapsulated probiotics from harsh conditions (Rama et al., 2020) . Trehalose could prevent damage to the cell membrane during the freezing-thawing process because of higher T g (Han & Bischof, 2004) . Cryoprotectants play a vital role to protect the probiotics from freezing stress. Skimmed milk contains proteins, which act as a protective shield for the cell and minimize cellular injury by stabilizing the cell membrane (Jofré et al., 2015) . Oligosaccharide acts as a protectant by inducing plasmolysis while the cell membrane becomes more plastic due to glycerol and minimizes the formation of ice crystals within the cell during freezing (Carvalho et al., 2004) . Xanthan-gellan gum was efficient to protect the probiotics but unable to provide adequate resistance against the developed stress during freeze drying (Tomás et al., 2015) . Fung et al. (2010) studied that soluble dietary fiber provided sufficient thermal resistance to L. acidophilus during the electrospinning technique. Dumont et al. (2003) classified four definite ranges of cooling rate based on studies on yeast. Low viability was observed in the very slow cooling rate (< 5 °C/min) range; low cooling rate (5-100 °C/min) did not cause any injury to the cells; rapid cooling rate (100-2000 °C/min) caused lethality due to considerable outflow of water and ultra-high cooling rate (> 5000 °C/min) preserved the viability of probiotics (Semyonov et al., 2010) . It was found that concentrated solutions that exerted high osmotic pressure (30-150 MPa) contributed to the high survivability of Lactobacillus paracasei even at low and moderate cooling rates during spray freeze drying (Semyonov et al., 2010) . Hao et al. (2021) found that culturing LAB strains at elevated temperatures was proved to be useful to improve the survivability of probiotics at higher heat stress conditions.

Dehydration of bacterial cells gives rise to serious oxidative stress and the cell membrane gets damaged due to the reactive oxygen species (ROS), which in turn leads to protein denaturation, lipid peroxidation along with desertification, and damage in cell nucleic acid (García, 2011) . Cell membranes are more vulnerable to ROS attack during the prolonged dry storage period (França et al., 2007) . Aerobic organisms use oxygen as electron acceptor; however, during respiration, oxygen could be partially reduced by forming ROS, such as hydrogen peroxide (H 2 O 2 ), superoxide anions (O 2 − ), and hydroxyl radicals (OH•) and these free radicals would be trapped by antioxidants defense system of probiotic cells under normal metabolic conditions. The dehydration causes water stress and results in the dysfunction of specific enzymes as well as the defense mechanism for which bacterial cells are ultimately affected by the attack of ROS (França et al., 2007) . In a desiccated state, the packing density of polar head groups of cellular membrane phospholipids increases that leading to the strengthening of van der Waals interaction between the carbon chains and increasing the phase transition temperature, consequently lipid will be in gel phase at room temperature. Upon rehydration, the lipids suffer a phase transition, resulting in extensive leakage and cell death (García, 2011) . Further, the higher degree of unsaturation of desiccated cells encourages lipid oxidation, as well as the polar heads of the phospholipids, generate ROS by the Fe +2 autoxidation process which lowers the shelf life of probiotics (França et al., 2007) . The oxygen reduction process produces ROS such as superoxide or H 2 O 2 and the protein-Fe +2 complex reacts with H 2 O 2 to produce ferryl ions which cause proteolysis or inactivation of protein, as well as protein dehydration induces conformational changes of protein, consequently decreasing biological activity and damaging the bacterial cells after rehydration (García, 2011) . Decreasing storage temperature and water activity result in increased storability of dried encapsulated cells. Rodrigues et al. (2011) reported that high temperature and relative humidity were detrimental to the survival of probiotics entrapped in microcapsules, which limited their application in food products. Several studies found that optimum survivability of probiotics in spray dried powder was observed at either 4 or 20 °C temperature with water activity between 0.11 and 0.23 during the storage period (Chávez & Ledeboer, 2007) . Spray dried powder with Gum Arabic and maltodextrin protected L. acidophilus in 97% vacuum condition at 4 °C (Reyes et al., 2018) , whereas skim milk provided higher protection to probiotic L. casei than maltodextrin and trehalose during spray drying and storage (Liao et al., 2017) . The electrosprayed Bifidobacterium longum subsp. infantis CECT 4552 powder showed higher viability after10 days at 37 °C and after 600 days at 23% RH conditions (Librán et al., 2017) . Azizi et al. (2021) found that spray and freeze drying provided an improved storability of probiotics Lactobacillus rhamnosus than the electrospraying technique at both ambient and refrigerated conditions. A thumb rule has been proposed that the T g should be 10-20 °C higher than the storage temperature to maintain the glassy state thus maintaining the structural integrity of powder during storage (Roos, 2002) . The ability to encapsulate materials for protecting the spray dried probiotic L. plantarum KLDS 1.0344 powder stored at 25 °C with a w of 0.11 was observed in the following order: potato resistant starch > pectin > potassium alginate > whey protein isolate and D-mannose (Broeckx et al., 2017) . Freeze drying has been practiced for the preservation of probiotics during long-term storage but causes cell damage during the drying process. The protective agents increase the glass transition temperature to avoid intracellular ice formation and reduce cell damage during drying (Meng et al., 2008) . The survival rate of fluidized bed dried Lactobacillus lactis 1464 was maintained (> 10 7 CFU/g) over 3 months of storage period after drying at 50-60 °C, with the application of monosodium glutamate and acacia gum (Wirunpan et al., 2016) . Fluidized bed drying provided better stability of Enterococcus faecium M74 than freeze drying process (Stummer et al., 2012) , whereas bacterial cells exposed to thermal or osmotic stress in growth media before harvesting resulted in higher survivability of Lactobacillus reuteri after fluidized bed drying (Schell & Beermann, 2014) . The osmotically stressed L. casei CRL 431 cells were found to be most stable even when stored at 30 or 37 °C after 24 weeks (Nag & Das, 2013) . Similarly, double microencapsulation of Lactobacillus acidophilus ATCC 43,121 by hybridization system with FOS and lactulose resulted in the highest survival rate at 25 °C (Ann et al., 2007) . The incorporation of vitamin E powder as a coating material provided higher stability to L. casei against oxidative damage during dry storage due to its antioxidant property (Nag & Das, 2013) .

Control release is a method to deliver core material at a targeted site at a specific rate and time. The core material release properties depend upon the core wall morphologies like mononuclear, polynuclear microcapsules, or microspheres. The release of active material may be a combination of the following release mechanisms (Pothakamury & Barbosa-Cánovas, 1995 The controlled release of probiotics can be judged by the effect of wall material and microencapsulation technologies on the survival of probiotics during the simulated GI condition, which has been illustrated in Table 3 .

The release rate depends upon the choice of wall material, morphology, thickness of wall material, physicochemical properties of wall and core material, and permeability of the shell.

The release kinetics follows the following models.

The release rate is constant means increasing or decreasing the concentration will not change the diffusion rate (Eq. 1).

where C t is the amount of core material released in time t, and k o is a zero-order rate constant.

The release rate is dependent on the concentration of the active material (Eq. 2).

where k 1 is the first-order rate constant.

Osmosis is the process in which a molecule transfers from a less concentrated region to a higher concentration through a semipermeable membrane. In osmotic control release, the core is released due to osmotic pressure from

(2) dC ∕ dt = k 1 C the microcapsules. From the Van't Hoff equation, we can calculate osmotic pressure as follows (Eq. 3).

where П = osmotic pressure (atm), M = molar concentration of solution (mol/L), R = gas constant 0.0821 L atm/mol K, T = temperature in K.

For microspheres systems, the core is dispersed within the matrix and is released when the matrix degrades or erodes. So, the surface area of the microsphere decreases with time, resulting in decreasing release rates. The release can be controlled by diffusion, erosion, or a combination of both. Erosion can be controlled by homogeneous or heterogeneous processes. The rate of erosion is constant in the homogeneous erosion process throughout the matrix, whereas for heterogeneous erosion, degradation is limited to a thin layer at the surface of the delivery system (Pothakamury & Barbosa-Cánovas, 1995) .

The core is dissolved or dispersed in a thermodynamically compatible medium, the polymer swells absorbing the fluid from the medium. The core in the swollen part of the matrix then diffuses outs. The membrane undergoes a transition (2015) from a glassy to a gel state and core material diffuse out (Madene et al., 2006) .

The development of food products with probiotic effects has emerged as functional foods (Table 4) intending to provide potential health benefits to mankind. Several factors influencing the survivability of probiotic strains in food products are the type of strain, the method for preparation of culture, state of cell inoculum, oxygen level, and storage temperature . Microencapsulated probiotic powder formulation has been proved as a more convenient delivery format compared to wet gelled formulations. However, the selection of appropriate microencapsulation technology and coating materials are crucial for the protection of probiotics as well as retention of their functionalities in different food matrices (Fig. 4) .

Beverages Pourjafar et al. (2020) encapsulated L. acidophilus by extrusion method with sodium alginate and chitosan and added (1 g) in 10 mL of Iranian Doogh beverage. It was observed that the microencapsulated beverage showed higher viability of probiotics (7.4 × 10 7 CFU/g) compared to the beverage containing free cells (5.8 × 10 4 CFU/g) during the storage period (at 5 °C up to 42 days) without any considerable change in pH, acidity, and sensory properties of the beverage. The application of probiotics Lactobacillus casei encapsulated by extrusion technology with sodium alginate in orange juice was studied by Olivares et al. (2019) . The authors reported higher viability of probiotics (10 6 CFU/mL) during 28 days of cold storage (at 4 °C) and the higher concentration of survivability was achieved due to the presence of ascorbic acid, an antimicrobial compound, antioxidant, and important nutrient for probiotics despite the lower pH (3.45) of juice. Probiotic apple juice was prepared by adding spray dried microencapsulated Lactobacillus rhamnosus GG (1% w/v) and resulted in higher survivability at lower pH and higher temperature of 25 °C as compared to a lower temperature of 4 °C . Dias et al. (2018) observed that the higher proportion of inulin improved the viability of spray dried encapsulated probiotic strain Bifidobacteria animalis (above 6.5 log CFU/g) in passion fruit juices during storage at 4 and 25 °C for 30 days whereas the microcapsules containing maltodextrin showed complete loss of viability of bacteria in stored juices at 25 °C after 30 days. Encapsulated bacteria incorporated in orange and apple juice showed higher stability, average malic acid concentration, and Brix than free cells throughout the six weeks of storage as the sugars in the orange juice could be more readily utilized by free probiotic bacteria than the entrapped cells (Ding & Shah, 2008) . King et al. (2007) found similar results and observed that the sensory score was higher for fermented tomato juice containing immobilized L. acidophilus than free cells due to inhibition of unfavorable reactions during the storage period.

Many studies have been performed on the application of microencapsulated bacterial strains in different types of cheese. There are certain advantages of selecting cheese as a good carrier of probiotic organisms due to its relatively high-fat content and good buffering capacity against adverse GI conditions (Frakolaki et al., 2021) . The application of microencapsulation of L. acidophilus by freeze drying with alginate and chitosan in spreadable goat Ricotta cheese improved the bacterial viability (> 6 log CFU/mL) and quality attributes such as lowering proteolysis, no moisture loss, lowering gumminess, and adhesiveness (Lopes et al., 2021) . Sharifi et al. (2021) co-encapsulated probiotic culture Lactobacillus plantarum and phytosterol by complex coacervation followed by freeze drying by applying whey. protein isolate and Gum Arabic as coating materials and incorporated in Iranian white cheese. It was observed that the combination of probiotic bacteria with phytosterol showed higher viability, i.e., 8.14 log CFU/g compared to microencapsulated probiotic strain alone (7.95 log CFU/g), and free cells (6.44 Log CFU/g) in cheese after 61 days of storage. Vasile et al. (2020) comicroencapsulated probiotic strain Lactobacillus casei with black beans aqueous extract by freeze drying using biopolymers such as whey protein isolate, chitosan, and inulin which provided improved viability of 2 log increase in bacterial cells as well as a higher stability of phytochemicals and biological parameters such as higher α-glucosidase and α-amylase inhibitory activity in 21 days stored soft cheese sample. Another study revealed that no difference was found between two microencapsulation technologies such as emulsion and extrusion techniques regarding proteolysis, bacterial counts, and organoleptic properties of Kesar cheese (Özer et al., 2008) .

In this study, the cheese with microencapsulated probiotics Lactobacillus acidophilus LA-5 and Bifidobacterium bifidum BB-12 showed the desired viability (above 10 7 CFU/g) whereas nonencapsulated probiotics were found to be continuously decreasing due to scalding throughout the 90 days of storage.

In the case of feta cheese, the incorporation of microencapsulated probiotics Bifidobacterium lactis and L. acidophilus did not significantly influence textural properties such as cohesiveness and springiness (p < 0.05) but chewiness, gumminess, and hardness were greatly affected (Kailasapathy & Masondole, 2005) . 

Similarly, probiotic yogurt has been developed by incorporating living strains to increase the therapeutic value (Chen & Chen, 2007) . Unlike cheese, it is a poor carrier of probiotics due to the lower pH (4.2 to 4.6). The problem has been resolved by different authors by microencapsulating the bacterial strains. The coating of whey protein and xanthan gum resulted in higher viability of the encapsulated probiotic strain Lactobacillus acidophilus, i.e., 6.98 log CFU/g as that of free cells (approximately 2 log CFU/g) in yogurt during 28 days of storage but the addition of microencapsulated probiotics increased adhesiveness, firmness, and viscosity as well as deceased syneresis of yogurt samples (Khorshidi et al., 2021) . De Prisco et al. (2017) encapsulated Lactobacillus delbrueckii in the alginate-chitosan capsule by extrusion technology and used it as a starter culture for yogurt which showed improved protection to probiotics during 28-day long storage (7.70 log CFU/g) as well as digestion process (2 h of gastric condition) having 100% survivability, whereas the free cells lost their viability completely. Li et al. (2020) observed that the addition of microencapsulated probiotics Lactobacillus strains with galactooligosaccharides and lactitol by extrusion showed an adverse effect on textural properties and syneresis of yogurt samples during storage though improved viability of 9.95 log CFU/g was achieved compared to the control sample. Microencapsulated Bifidobacteria when incorporated into stirred yogurt, the grainy texture was developed with particle size ranging from 22 to 50 μm which retarded the sensory quality (Adhikari et al., 2003) . With the addition of prebiotic ingredients such as resistant starch and glycerol as encapsulating material, the viability was enhanced but failed to protect the probiotic cells in simulated GI conditions (Sultana et al., 2000) . This stimulates the growth of probiotics with enhancing the functionality of food products due to a synergistic effect of prebiotic and probiotic. A negative correlation was observed between survivability of probiotics and post storage pH due to the presence of fruit pulp in yogurt despite higher survivability after 35 days of storage period (Kailasapathy et al., 2008) . The oxygen-sensitive probiotics were also protected effectively by incorporating microencapsulated powder in yogurt (Talwalkar & Kailasapathy, 2004 ).

The growth of probiotics in ice cream is dependent on pH as neutrality tends to support the growth of microorganisms, whereas fermented ice cream affects the metabolic activity of probiotic bacteria but frozen injury, oxygen toxicity, and higher osmotic pressure mainly cause the loss in viability of strains in frozen dairy desserts (Frakolaki et al., 2021) . Zaeim et al. (2020) prepared ice cream with the incorporation of CC initial cell concentration, NM not mentioned electrosprayed microcapsules containing probiotic bacterium Lactobacillus plantarum with alginate, chitosan, inulin, and resistant starch as prebiotics. It was observed that starchcontaining microcapsules provided better viability (7.82 log CFU/g) as compared to inulin (7.37 log CFU/g) in ice cream after 90 days of storage. The co-encapsulation of probiotics with prebiotics improves their viability in harsh conditions of the food matrix and digestive system by accelerating their growth and proliferation (Zaeim et al., 2020) . Similarly, Afzaal et al. (2020) observed that microencapsulated probiotic Lactobacillus casei in calcium alginate and whey protein concentrate hydrogel exhibited better survival (> 8 log CFU/ mL) compared to non-encapsulated cells (6.41 log CFU/mL) in ice cream samples after 80 days and the microencapsulated cells resulted in grittiness as well as the hydrocolloids affected the texture and appearance of ice cream. The authors also reported that the viscosity of ice cream was greatly affected by the properties of microcapsules such as shape, size, and type of coating materials used for encapsulation. fructooligosaccharides. Higher viability of more than 7 log CFU/g in chocolate after 90 days of storage at 25 °C and gastrointestinal digestion process (8 log CFU/g), as well as cell count of above 10.50 log CFU/g during the colonic fermentation, showed the potential delivery of probiotics through chocolate. Similarly, the addition of microencapsulated bacterium S. thermophiles prepared by emulsification process with encapsulants (pectin, carboxymethylcellulose, cellobiose, and gum Arabic) showed good viability in dark (6.90 log CFU/g) and milk (7.12 log CFU/g) chocolates stored at 4 °C up to 180 days without affecting the sensory attributes and moisture content of chocolates (Ozturk et al., 2021) . In this study, the higher viability of probiotics during storage might be attributed to the higher protein and carbohydrate content of milk chocolate along with the presence of antioxidant compounds in chocolates preventing the loss of bacteria in gastrointestinal conditions. Introduction of microencapsulated powder (prepared by emulsification process) into chocolate exhibited protection to probiotic strains in environmental stress conditions due to the protective action of lipid components present in cocoa butter (Lahtinen et al., 2007) . Muzzafar and Sharma (2018) microencapsulated probiotics Lactobacillus acidophilus, Lactobacillus rhamnosus, and Bifiobacterium bifidum by emulsification followed by freeze drying using xanthan gum, maltodextrin, and sunflower oil as wall materials and incorporated the microencapsulated powder in the cream layer of biscuit. It was observed that the probiotic biscuits retained the viability (above 8 log CFU/g) over 8 weeks (stored at 25 °C) and higher fat, fiber content with higher taste and overall acceptability was found in probiotic biscuits due to the influence of ingredients in wall materials for encapsulation. Similarly, functional biscuits have been developed containing prebiotic inulin and Fig. 4 Application of microencapsulated probiotics in different food products and suitable packaging materials for probioticated foods probiotic Lactobacillus plantarum encapsulated by emulsification process using alginate solution (González-Forte et al., 2014) . The additional coating layer of starch-glycerol extended the higher survivability of probiotic (8.7 log CFU/ mL) as compared to uncoated sample (7.8 log CFU/mL) up to 1 month of storage as well as protected the viability during the passage of the simulated GI tract (5.5 log CFU/mL) as that of the control sample (3.5 log CFU/mL). Another researcher incorporated microencapsulated spray dried L. acidophilus to bread surface through the starch-based edible coating and evaluated the change in physicochemical parameters (Altamirano-Fortoul et al., 2012) . The probiotic count was not affected by the baking process (at 180 °C for 16 min) exhibiting survival of 63.2% due to an adhesive interaction between probiotics and starch macromolecules. The developed bread exhibited similar characteristics to the common bread with reduced failure force and better acceptability. de Oliveira Gomes et al. (2021) prepared Italian salami (a dry fermented meat product) with the incorporation of spray dried probiotic Bifidobacterium animalis encapsulated using alginate, β-cyclodextrin, and xanthan gum. The addition of 0.020% curing salt with encapsulated probiotic resulted in higher viability (> 8 log CFU/g) during storage (at 25 °C up to 45 days) without affecting the lipid oxidation, nutritional profile, fatty acid profile, textural properties of salami, as well as the probiotication improved the organoleptic properties. Camargo et al. (2021) probioticated coppa (an industrialized meat product obtained from the pork carcass) with probiotic Bifidobacterium bifidum encapsulated by emulsification process with curing salt, black pepper, garlic, and nutmeg. There was a declination of viability from 10.60 to 7.3 log CFU/g after 30 days of ripening period along with lower lipid oxidation and greater weight loss were observed in probiotic added coppa as compared to control samples (without the addition of probiotic) over the storage period. Yoha et al. (2021) developed 3D printed synbiotic-composite flour construct comprising of green gram, fried gram, ajwain seeds, and barnyard millet with the incorporation of probiotic Lactiplantibacillus plantarum encapsulated by spray drying, freeze drying, spray freeze drying, and refractance window drying, and subjected the 3D constructs to post-processing methods such as freeze drying, hot air drying, and microwave drying. In this study, the incorporation of spray-freeze dried probiotic powder (flour and probiotic powder in a ratio of 9:1, w/w) followed by freeze dried 3D printed construct showed the highest viability 6.43 log CFU/mL with 79% survivability under in vitro digestion process as well as retained the probiotic viability with 96-98% of survival rate after 35 days of storage period (stored at 4 °C) but the microwave drying (360 W for 5 min) post-processed flour construct showed the complete loss of cell viability due to the rapid rise in product temperature. Rajam et al. (2015) microencapsulated Lactobacillus plantarum with carrier matrices such as denatured whey protein isolate and fructooligosaccharide. The freeze dried powder was incorporated into noodle formation and the functional properties were evaluated. Declination of survivability from 93.63 to 62.42% was observed in the hot dried noodle. Cooking time was reduced by the incorporation of probiotic microcapsules which might be due to a decrease in the gluten level that allows the rapid gelatinization and increased solid loss occurred due to disturbance in the gluten network that resulted in a discontinuous protein matrix. The probiotic noodle was a little brown color due to the addition of microcapsules, but the overall acceptability was higher.

The selection of packaging material is an important factor for the shelf life extension of probiotic fortified functional food products (Fig. 4) . Some anaerobes, in particular Bifidobacteria, are more susceptible to oxygen; therefore, plastic material with higher oxygen permeability should be avoided while handling the probiotic products. Application of oxygen scavenging agent in packaging material with good oxygen barrier properties provided favorable conditions for preserving probiotics in yogurt (Miller et al., 2003) . Glass containers with greater thickness resulted in higher survivability of Bifidobacteria and L. acidophilus in yogurt sample as compared to plastic containers (Shah, 2000) . The higher cost due to the glass containers could be overcome by the insertion of oxygen scavengers, active packaging, and vacuum packaging with higher barrier properties to air and moisture (Tripathi & Giri, 2014) . Edible coating or film with the application of prebiotics such as oligosaccharide and inulin have been shown to improve the viability of probiotics in food materials (Asaithambi et al., 2021) . Singu et al. (2020) observed higher viability of probiotics Saccharomyces boulardii in synbiotic corn flakes kept in nitrogen gas packaging system (7.81 log CFU/g) as compared to vacuum (7.62 log CFU/g), and atmospheric air (7.46 log CFU/g) packaging on the 90th day of storage. In this study, vacuum packaging caused the breaking of corn flakes thus rupture of the embedded cell membrane of probiotics during the process of creating the vacuum whereas, nitrogen as inert gas prevented the oxidation of stored product thus retaining the survival of probiotics in the stored corn flakes. The storage conditions such as crystallinity of the packaging material, temperature, and relative humidity may influence the permeability of packaging material thus may alter the survival rate of the encapsulated probiotic strains (da Cruz et al., 2007; Miller et al., 2002) .

Generally, oral administration of probiotics causes severe loss of viability during the transit of the GI tract. From this point of view, incorporation of microencapsulated probiotic bacteria in the formulation of food products is an alternative and cheapest way to provide functional benefits to human beings as well as animals despite taking antibiotic treatment. Microencapsulation is an effective approach to maintain the viability of probiotics during manufacturing, storage, and gastrointestinal condition. Different technologies such as spray drying, freeze drying, extrusion have been commonly used but other drying methods such as vacuum, fluidized bed, microwave drying can also be employed effectively to encapsulate the probiotics with suitable coating materials at an industrial scale. The incorporation of microencapsulated probiotics into food formulations is a safe pathway to reach them in the targeted delivery system. This process is also associated with several technological, microbiological, and economic challenges.

Many efforts of researchers have succeeded to overcome the hurdles to some extent but future research work is needed to explore heat-resistant strains and coating materials for encapsulation by employing different cost-effective technologies. This solution will lead to a novel approach for the preparation of food products with functional features but the additional manufacturing cost should be within an acceptable limit to remain competitive in the globalized market of functional foods. The microcapsules containing probiotics should not alter the sensorial properties of formulated products as well as the polymers used for encapsulating should be food grade and certified with GRAS status preferably of plant origins. Emulsion and extrusion technologies are easier to scale up, and these methods avoid high temperatures during the encapsulation process thus providing higher survivability of probiotics with a smaller size of beads. The emulsification process limits the application in food industries as residual oil on the capsule surface hampers the survivability of probiotics and is also detrimental to the sensory properties of food products. Spray chilling has been considered as the least expensive microencapsulation technology for probiotics and fluidized bed drying produces microcapsules of the desired flowability with lower manufacturing cost as compared to spray and freeze drying. Optimization of process conditions is required for different probiotic strains to popularize these technologies on an industrial scale.

Different probiotic fortified dairy and nondairy-based products and beverages, meat-based products, and readyto-eat cereal products are available in the global market.

A consistent effort and research should be put in for the commercial production of probiotic enriched bakery and extruded products for all age groups. Proper labeling and health claims should be informed which includes types of the genus, species, and strain; a minimum viable number of probiotics at the end of shelf-life; serving size to provide an adequate amount of probiotic to satisfy the health claim; description of physiological effect certified by the law with scientific evidence and storage conditions for storing the product. From the overview, it is concluded that microencapsulation technology has future benefits despite the extra cost by incorporating the microencapsulated probiotics for the formulation of higher value-added products.

The effect of low molecular weight surfactants and proteins on surface stickiness of sucrose during powder formation through spray drying

Survival and metabolic activity of microencapsulated Bifidobacterium longum in stirred yogurt

Viability of microencapsulated bifidobacteria in set yogurt during refrigerated storage

Survival and stability of free and encapsulated probiotic bacteria under simulated gastrointestinal conditions and in ice cream

Microencapsulation of Lactobacillus rhamnosus ATCC 7469 by spray drying using maltodextrin, whey protein concentrate and trehalose. Food Science and Technology International

Optimization of dehydration of lactobacillus salivarius using radiant energy vacuum

Synbiotic yogurt-ice cream produced via incorporation of microencapsulated lactobacillus acidophilus (la-5) and fructooligosaccharide

Optimization of baker's yeast drying in industrial continuous fluidized bed dryer

Stability of probiotic Lactobacillus plantarum in dry microcapsules under accelerated storage conditions

Development of microparticulate systems for intestinal delivery of Lactobacillus acidophilus and Bifidobacterium lactis

Microstructural studies of probiotic bacteria-loaded alginate microcapsules using standard electron microscopy techniques and anhydrous fixation

Viability of some probiotic coatings in bread and its effect on the crust mechanical properties

Temperature-controlled microwave-vacuum drying of lactic acid bacteria: Impact of drying conditions on process and product characteristics

Microwavefreeze drying of lactic acid bacteria: Influence of process parameters on drying behavior and viability

Structural basis of the impact of microwave drying on survival and shelf life of Lactobacillus paracasei

Microencapsulation-the future of probiotic cultures

Survival of microencapsulated Bifidobacterium longum in Cheddar cheese during production and storage

Cellular injuries and storage stability of spray-dried Lactobacillus rhamnosus GG

Microencapsulation of Lactobacillus acidophilus ATCC 43121 with prebiotic substrates using a hybridisation system

Encapsulation in alginate-coated gelatin microspheres improves survival of the probiotic Bifidobacterium adolescentis 15703T during exposure to simulated gastro-intestinal conditions

Microencapsulation of probiotic Saccharomyces cerevisiae var. boulardii with different wall materials by spray drying

Single and double layered microencapsulation of probiotics by spray drying and spray chilling

Current status of non-thermal processing of probiotic foods: A review

Applications of ultrasound in food and bioprocessing

Synthesis and characterization of carboxymethyl cellulose from sugarcane bagasse

Protection of L. rhamnosus by spray-drying using two prebiotics colloids to enhance the viability

Bioactive properties of novel probiotic Lactococcus lactis fermented camel sausages: Cytotoxicity, angiotensin converting enzyme inhibition, antioxidant capacity, and antidiabetic activity

Effect of heat, pH and coating process with stearic acid using a fluidized bed granulator on viability of probiotic Lactobacillus reuteri C 10

Microencapsulation of Lactobacillus rhamnosus using sesame protein isolate: effect of encapsulation method and transglutaminase

Spray chilling microencapsulation of Lactobacillus acidophilus and Bifidobacterium animalis subsp. lactis and its use in the preparation of savory probiotic cereal bars

Microencapsulation of Lactobacillus rhamnosus HN001 by spray drying and its evaluation under gastrointestinal and storage conditions

Using probiotics to flatten the curve of coronavirus disease COVID-2019 pandemic

Drying kinetics and survival of bacteria suspensions of L. paracasei F19 in lowtemperature vacuum drying

Combined influence of fermentation and drying conditions on survival and metabolic activity of starter and probiotic cultures after low-temperature vacuum drying

Mechanism of viability loss during fluidized bed drying of baker's yeast

Optimization of spray-drying process conditions for the production of maximally viable microencapsulated L. acidophilus NCIMB 701748

Thermal stabilization of probiotics by adsorption onto porous starches. Carbohydrate Polymers

Flow cytometric viability assessment of lactic acid bacteria starter cultures produced by fluidized bed drying

Microwave and convective drying of potato slices

Survival kinetics of lactic acid starter cultures during and after freeze drying

Drying techniques of probiotic bacteria as an important step towards the development of novel pharmabiotics

Enhancing the viability of Lactobacillus rhamnosus GG after spray drying and during storage

Encapsulation of Lactobacillus rhamnosus GG in microparticles: Influence of casein to whey protein ratio on bacterial survival during digestion

Encapsulation of probiotic living cells: From laboratory scale to industrial applications

Lactobacillus acidophilus La-05 encapsulated by spray drying: Effect of mucilage and protein from flaxseed (Linum usitatissimum L.). LWT-Food Science and Technology

Rheological monitoring of polyacrylamide gelation: Importance of cross-link density and temperature

The physicochemical and sensory characteristics of coppa with Bifidobacterium animalis ssp. Lactis (BB12) probiotic

Effect of skimmed milk powder concentrations on the biological characteristics of microencapsulated Saccharomyces cerevisiae by vacuum-spray-freeze-drying

Effects of various sugars added to growth and drying media upon thermotolerance and survival throughout storage of freeze-dried Lactobacillus delbrueckii ssp. bulgaricus

One-pot ultrasonic synthesis of multifunctional microbubbles and microcapsules using synthetic thiolated macromolecules

Solid lipid microparticles containing water-soluble compounds of different molecular mass: Production, characterisation and release profiles

Effects of starch filler on the physical properties of lyophilized calcium-alginate beads and the viability of encapsulated cells

Blend microspheres of poly (3-hydroxybutyrate) and cellulose acetate phthalate for colon delivery of 5-fluorouracil

Microencapsulation of a probiotic and prebiotic in alginate-chitosan capsules improves survival in simulated gastro-intestinal conditions

Drying of probiotics: Optimization of formulation and process to enhance storage survival

Optimization of incorporated prebiotics as coating materials for probiotic microencapsulation

Effect of xanthan-chitosan-xanthan double layer encapsulation on survival of Bifidobacterium BB01 in simulated gastrointestinal conditions, bile salt solution and yogurt

Applications of probiotic encapsulation in dairy products. Encapsulation and Controlled Release Technologies in Food Systems

Controlled release of Lactobacillus rhamnosus biofilm probiotics from alginatelocust bean gum microcapsules

Aluminum carboxymethyl cellulose-rice bran microcapsules: Enhancing survival of Lactobacillus reuteri KUB-AC5. Carbohydrate Polymers

Three protective agents for pectinrice bran capsules for encapsulating Lactobacillus plantarum

Postbiotic activities of lactobacilli-derived factors

Electrospraying microencapsulation of Lactobacillus plantarum enhances cell viability under refrigeration storage and simulated gastric and intestinal fluids

Stabilization and preservation of Lactobacillus acidophilus in saccharide matrices

Microencapsulation of a synbiotic into PLGA/alginate multiparticulate gels

Protein sprayfreeze drying. Effect of atomization conditions on particle size and stability

Trehalose as a "chemical chaperone

Packaging system and probiotic dairy foods

Investigation of pectin/starch hydrogel as a carrier for oral delivery of probiotic bacteria

Development of novel carboxymethyl cellulose/k-carrageenan blends as an enteric delivery vehicle for probiotic bacteria

Unravelling the functional and technological potential of soy milk based microencapsulated Lactobacillus crispatus and Lactobacillus gasseri

Co-encapsulation of lactic acid bacteria and prebiotic with alginate-fenugreek gum-locust bean gum matrix: Viability of encapsulated bacteria under simulated gastrointestinal condition and during storage time

Effect of resistant starch (Hi-maize) on the survival of Lactobacillus acidophilus microencapsulated with sodium alginate

Bifidobacterium Bb-12 microencapsulated by spray drying with whey: Survival under simulated gastrointestinal conditions, tolerance to NaCl, and viability during storage

Protection of Bifidobacterium lactis and Lactobacillus acidophilus by microencapsulation using spraychilling

Application of microencapsulated probiotic Bifidobacterium animalis ssp. lactis BB-12 in Italian salami

Microencapsulated starter culture during yoghurt manufacturing, effect on technological features

A new modeling approach for the prediction of yeast drying rates in fluidized beds

Bacteria microencapsulation in PLGA microdevices by supercritical emulsion extraction

Encapsulation of Lactobacillus kefiri in alginate microbeads using a double novel aerosol technique

Stability of microencapsulated Lactobacillus acidophilus and Lactococcus lactis ssp. cremoris during storage at room temperature at low aw

Survival of microencapsulated probiotic bacteria after processing and during storage: A review

Development and physico-chemical characterization of microencapsulated bifidobacteria in passion fruit juice: A functional non-dairy product for probiotic delivery

Free and immobilized Lactobacillus casei ATCC 393 on whey protein as starter cultures for probiotic Feta-type cheese production

Survival of free and microencapsulated probiotic bacteria in orange and apple juices

Effect of various encapsulating materials on the stability of probiotic bacteria

Development and characterisation of whey protein micro-beads as potential matrices for probiotic protection

Improved probiotic survival to in vitro gastrointestinal stress in a mousse containing Lactobacillus acidophilus La-5 microencapsulated with inulin by spray drying

Microwave freeze drying of sea cucumber (Stichopus japonicus)

Influence of cooling rate on Saccharomyces cerevisiae destruction during freezing: Unexpected viability at ultra-rapid cooling rates

Energy consumption, density, and rehydration rate of vacuum microwave-and hot-air convectiondehydrated tomatoes

A review of drying methods for improving the quality of probiotic powders and characterization

Nanoencapsulation techniques for food bioactive components: A review

Report on drafting guidelines for the evaluation of probiotics in food

Microencapsulation of L. acidophilus (La-05) and B. lactis (Bb-12) and evaluation of their survival at the pH values of the stomach and in bile

Storage stability of vacuum-dried probiotic bacterium Lactobacillus paracasei F19. Food and Bioproducts Processing

A review of the microencapsulation techniques for the incorporation of probiotic bacteria in functional foods

Oxidative stress and its effects during dehydration

Microencapsulation of bifidobacteria by spray drying in the presence of prebiotics

Effect of microencapsulation on survival of Bifidobacterium BB-12 exposed to simulated gastrointestinal conditions and heat treatments

Characterization of fibrous residues from agrowastes and the production of nanofibers

Effect of chitosan-alginate encapsulation with inulin on survival of Lactobacillus rhamnosus GG during apple juice storage and under simulated gastrointestinal conditions

Colon targeting of 5-fluorouracil using polyethylene glycol cross-linked chitosan microspheres enteric coated with cellulose acetate phthalate

Preparation and properties of microencapsulated genetically engineered bacteria cells for oral therapy of uremia

Anhydrobiosis in bacteria: From physiology to applications

A spray-dried culture for probiotic Cheddar cheese manufacture

In vitro effects of pH, bile salts and enzymes on the release and viability of encapsulated Lactobacillus plantarum strains in a gastrointestinal tract model

Viability of Lactobacillus acidophilus La5 in pectin-whey protein microparticles during exposure to simulated gastrointestinal conditions

Legume proteins are smart carriers to encapsulate hydrophilic and hydrophobic bioactive compounds and probiotic bacteria: A review

Action of trehalose on the preservation of Lactobacillus delbrueckii ssp. bulgaricus by heat and osmotic dehydration

Optimization of electrospraying conditions for the microencapsulation of probiotics and evaluation of their resistance during storage and in-vitro digestion

Application of coating on dog biscuits for extended survival of probiotic bacteria

Viability of microencapsulated Bifidobacterium animalis ssp. lactis BB12 in kefir during refrigerated storage

Functional foods and nondairy probiotic food development: Trends, concepts, and products

Development of probiotic beads similar to fish eggs

Effect of experimental parameters on temperature distribution during continuous and pulsed microwave heating

Whey protein concentrate hydrogels as bioactive carriers

Analysis of heat and mass transfer during microwave drying of food products

Direct cell injury associated with eutectic crystallization during freezing

Thermotolerance, survival, and stability of lactic acid bacteria after spray drying as affected by the increase of growth temperature

Influence of caseinbased microencapsulation on freeze-drying and storage of probiotic cells

Manipulation of lyophilization-induced phase separation: Implications for pharmaceutical proteins

Protein formulation and lyophilization cycle design: Prevention of damage due to freeze-concentration induced phase separation

What's driving growth in functional food and beverages? A convergence of nutrition, convenience and taste

Preparation of probiotic powder by the spray freeze-drying method

Introduction to prebiotics and probiotics

Effect of microencapsulation and resistant starch on the probiotic survival and sensory properties of synbiotic ice cream

Bifidogenic characteristic and protective effect of saba starch on survival of Lactobacillus plantarum CIF17AN2 during vacuum-drying and storage. Carbohydrate Polymers

Water sorption properties, molecular mobility and probiotic survival in freeze dried protein-carbohydrate matrices

Impact of encapsulating probiotics with cocoa powder on the viability of probiotics during chocolate processing, storage, and in vitro gastrointestinal digestion

Prebiotics: Why definitions matter

Drug dissolution from indomethacin-starch hybrid powders prepared by the dry impact blending method

Encapsulation of lactic acid bacteria with alginate/starch capsules

Impact of different cryoprotectants on the survival of freeze-dried Lactobacillus rhamnosus and Lactobacillus casei/paracasei during long-term storage

Bio-encapsulation of microbial cells for targeted agricultural delivery

Pectin and charge modified pectin hydrogel beads as a colon-targeted drug delivery carrier

Survival of free and microencapsulated Lactobacillus acidophilus and Bifidobacterium lactis and their effect on texture of feta cheese

Survival of Lactobacillus acidophilus and Bifidobacterium animalis ssp. lactis in stirred fruit yogurts

Effect of cryopreservation and microencapsulation of lactic acid bacterium Enterococcus faecium MC13 for long-term storage

Properties of the drying of agricultural products in microwave vacuum: A review article

The effect of using microencapsulated pro and prebiotics on the aromatic compounds and sensorial properties of synbiotic goat cheese

The behaviour of whey protein isolate in protecting Lactobacillus plantarum

Effect of whey protein-and xanthan-based coating on the viability of microencapsulated Lactobacillus acidophilus and physiochemical, textural, and sensorial properties of yogurt

Surface composition of industrial spray-dried milk powders. 2. Effects of spray drying conditions on the surface composition

Survival of lactic acid bacteria during microwave vacuum-drying of plain yoghurt. LWT-Food Science and Technology

fermentation of tomato juice by cell immobilized Lactobacillus acidophilus

Probiotics-based foods and beverages as future foods and their overall safety and regulatory claims

Effects of vitrified and nonvitrified sugars on phosphatidylcholine fluid-to-gel phase transitions

Evaluation of encapsulation techniques of probiotics for yoghurt

Effect of live and inactivated Lactobacillus rhamnosus GG on experimentally induced rhinovirus colds: Randomised, double blind

Microencapsulation of Lactobacillus acidophilus in zeinalginate core-shell microcapsules via electrospraying

Effect of starch-and lipid-based encapsulation on the culturability of two Bifidobacterium longum strains

Ultrasonic encapsulation-A review

Preparation of water-in-oil-in-water emulsions by low frequency ultrasound using skim milk and sunflower oil

The formation of double emulsions in skim milk using minimal food-grade emulsifiers-A comparison between ultrasonic and high pressure homogenisation efficiencies

Effect of a microencapsulated synbiotic product on microbiology, microstructure, textural and rheological properties of stirred yogurt

Development of a microencapsulated synbiotic product and its application in yoghurt

Microencapsulation of Lactobacillus casei BNCC 134415 under lyophilization enhances cell viability during cold storage and pasteurization

Preserving viability of Lactobacillus rhamnosus GG in vitro and in vivo by a new encapsulation system

Viability of microencapsulated bifidobacteria in simulated gastric juice and bile solution

Microencapsulation of Lactobacillus casei LK-1 by spray drying related to its stability and in vitro digestion

Encapsulation by electrospray coating atomization of probiotic strains

The challenges in commercialisation of probiotic API manufacturing

Microencapsulation of Lactobacillus acidophilus La-05 and incorporation in vegan milks: Physicochemical characteristics and survival during storage, exposure to stress conditions, and simulated gastrointestinal digestion

Spreadable goat Ricotta cheese added with Lactobacillus acidophilus La-05: Can microencapsulation improve the probiotic survival and the quality parameters? Food Chemistry

Electrospinning as a useful technique for the encapsulation of living bifidobacteria in food hydrocolloids

Microencapsulation of Bifidobacterium animalis subsp. lactis INL1 using whey proteins and dextrans conjugates as wall materials

Microencapsulation of Lactobacillus acidophilus La-5 by spray-drying using sweet whey and skim milk as encapsulating materials

Flavour encapsulation and controlled release-a review

Reducing the risk of infection in the elderly by dietary intake of yoghurt fermented with Lactobacillus delbrueckii ssp. bulgaricus OLL1073R-1

Effect of the thermal level on the viability of microencapsulated living cells dehydrated by near fluidizing microwave drying

Microencapsulation of bacteria: A review of different technologies and their impact on the probiotic effects

Anhydrobiotics: The challenges of drying probiotic cultures

New drying process for lactic bacteria based on their dehydration behavior in liquid medium

The control of dissolved oxygen content in probiotic yoghurts by alternative packaging materials

The influence of packaging materials on the dissolved oxygen content of probiotic yoghurt

Influence of different classes of crosslinkers on alginate polyelectrolyte nanoparticle formation, thermodynamics and characteristics

Effect of calcium alginate and resistant starch microencapsulation on the survival rate of Lactobacillus acidophilus La5 and sensory properties in Iranian white brined cheese

Novel approaches for co-encapsulation of probiotic bacteria with bioactive compounds, their health benefits and functional food product development: A review

Effect of drying methods (electrospraying, freeze drying and spray drying) on survival and viability of microencapsulated Lactobacillus rhamnosus ATCC 7469

Microencapsulation of Lactobacillus acidophilus LA-5 and Bifidobacterium animalis BB-12 in pectin and sodium alginate: A comparative study on viability, stability, and structure

The influence of multi stage alginate coating on survivability of potential probiotic bacteria in simulated gastric and intestinal juice

Probiotics and food probiotic products; based on dairy probiotic products

Survival of encapsulated probiotic bacteria in Iranian yogurt drink (Doogh) after the product exposure to simulated gastrointestinal conditions

Principles and methods of microencapsulation of probiotic microorganisms

Biodegradation of gasoline by gellan gum-encapsulated bacterial cells

Evaluation of physiochemical, textural, microbiological and sensory characteristics in set yogurt reinforced by microencapsulated B ifidobacterium bifidum F-35

Integration of polysaccharide-thermoprotectant formulations for microencapsulation of Lactobacillus plantarum, appraisal of survivability and physico-biochemical properties during storage of spray dried powders

Resistant starch-based edible coating composites for spray-dried microencapsulation of Lactobacillus acidophilus, comparative assessment of thermal protection, in vitro digestion and physicochemical characteristics

Microencapsulation of insulin and its release using w/o/w double emulsion method

Microbiological and sensory quality of dry fermented sausages containing alginatemicroencapsulated Lactobacillus reuteri

Stability of Lactobacillus reuteri in different types of microcapsules

Microencapsulation of probiotics for incorporation in cream biscuits

Improving ambient temperature stability of probiotics with stress adaptation and fluidized bed drying

Alginate-Persian Gum-Prebiotics microencapsulation impacts on the survival rate of Lactococcus lactis ABRIINW-N19 in orange juice

Fermentative ability of alginate-prebiotic encapsulated Lactobacillus acidophilus and survival under simulated gastrointestinal conditions

A further amendment to the classical core structure of gum arabic (Acacia senegal)

Influence of encapsulation and coating materials on the survival of Lactobacillus plantarum and Bifidobacterium longum in fruit juices

Health properties of resistant starch

Inulin, himaize, and trehalose as thermal protectants for increasing viability of Lactobacillus acidophilus encapsulated by spray drying

Co-encapsulation of Lactobacillus acidophilus with inulin or polydextrose in solid lipid microparticles provides protection and improves stability

Survival of microencapsulated Lactobacillus casei (prepared by vibration technology) in fruit juice during cold storage

Stability of microencapsulated B. lactis (BI 01) and L. acidophilus (LAC 4) by complex coacervation followed by spray drying

Stability of free and encapsulated Lactobacillus acidophilus ATCC 4356 in yogurt and in an artificial human gastric digestion system

Improving the viability of Bifidobacterium bifidum BB-12 and Lactobacillus acidophilus LA-5 in white-brined cheese by microencapsulation

Effect of microencapsulation on viability of Lactobacillus acidophilus LA-5 and Bifidobacterium bifidum BB-12 during Kasar cheese ripening

Effect of different microencapsulating materials on the viability of S. thermophilus CCM4757 incorporated into dark and milk chocolates

Co-microencapsulation of γ-aminobutyric acid (GABA) and probiotic bacteria in thermostable and biocompatible exopolysaccharides matrix

Multilayer co-encapsulation of probiotics and γ-amino butyric acid (GABA) using ultrasound for functional food applications

Effect of additives on the morphology of spray-dried powder

Critical water activity and amorphous state for optimal preservation of lyophilised lactic acid bacteria

Microencapsulation of Bifidobacterium animalis subsp. lactis and Lactobacillus acidophilus in cocoa butter using spray chilling technology

Interactions between formulation and spray drying conditions related to survival of Lactobacillus plantarum WCFS1

Development of a probiotic delivery system based on gelation of water-in-oil emulsions

Encapsulation of bifidobacteria in whey protein-based microcapsules and survival in simulated gastrointestinal conditions and in yoghurt

Bacteria and chocolate: A successful combination for probiotic delivery

Fundamental aspects of controlled release in foods

Survival and behavior of encapsulated probiotics (Lactobacillus plantarum) in calcium-alginate-soy protein isolate-based hydrogel beads in different processing conditions (pH and Temperature) and in pasteurized mango juice

Optimization of electrospray-assisted microencapsulation of probiotics (Leuconostoc lactis) in soy protein isolate-oil particles using Box-Behnken experimental design

Mucoadhesive beads of gellan gum/pectin intended to controlled delivery of drugs

Use of prebiotic sources to increase probiotic viability in pectin microparticles obtained by emulsification/internal gelation followed by freezedrying

Rheological and structural characteristics of whey protein-pectin complex coacervates

Effect of whey protein-alginate wall systems on survival of microencapsulated Lactobacillus plantarum in simulated gastrointestinal conditions

Microencapsulation of Lactobacillus plantarum MTCC 5422 in fructooligosaccharide and whey protein wall systems and its impact on noodle quality

Cheese whey and ricotta whey for the growth and encapsulation of endogenous lactic acid bacteria

Survival of microencapsulated Bifidobacterium pseudolongum in simulated gastric and intestinal juices

Recent developments in prebiotics to selectively impact beneficial microbes and promote intestinal health

Microencapsulation of microbial cells

Microencapsulating Polymers for Probiotics Delivery Systems: Preparation, Characterization, and Applications. Food Hydrocolloids

Survival in food systems of Lactobacillus rhamnosus R011 microentrapped in whey protein gel particles

New scientific paradigms for probiotics and prebiotics

Encapsulation of probiotics and nutraceuticals: Applications in functional food industry

Viability of Lactobacillus acidophilus NRRL B-4495 encapsulated with high maize starch, maltodextrin, and gum arabic

Effect of microencapsulation of Lactobacillus acidophilus LA-5 on physicochemical, sensory and microbiological characteristics of stirred probiotic yoghurt

Freeze dried probiotic carrot juice powder for better storage stability of probiotic

Storage stability of Lactobacillus paracasei as free cells or encapsulated in alginate-based microcapsules in low pH fruit juices

Influence of L-cysteine, oxygen and relative humidity upon survival throughout storage of probiotic bacteria in whey protein-based microcapsules

Ultrasound extraction of phenolics and anthocyanins from jabuticaba peel

Pre-selection of protective colloids for enhanced viability of Bifidobacterium bifidum following spray-drying and storage, and evaluation of aguamiel as thermoprotective prebiotic

Viability of Lactobacillus plantarum entrapped in double emulsion during Oaxaca cheese manufacture, melting and simulated intestinal conditions

Importance of glass transition and water activity to spray drying and stability of dairy powders

Microencapsulation of Lactobacillus helveticus and Lactobacillus delbrueckii using alginate and gellan gum. Carbohydrate Polymers

Textural properties of alginate-pectin beads and survivability of entrapped Lb. casei in simulated gastrointestinal conditions and in yoghurt

Reversed chitosan-alginate polyelectrolyte complex for stability improvement of alpha-amylase: Optimization and physicochemical characterization

Effect of carbohydrates on the survival of Lactobacillus helveticus during vacuum drying

Alternative drying processes for the industrial preservation of lactic acid starter cultures

Ecological and functional implications of the acidadaptation ability of Bifidobacterium: A way of selecting improved probiotic strains

Approaches for enhancing the viability of probiotics: A review

Fluidized bed microencapsulation of Lactobacillus reuteri with sweet whey and shellac for improved acid resistance and in-vitro gastro-intestinal survival

Survival of Lactobacillus helveticus entrapped in Ca-alginate in relation to water content, storage and rehydration

Microencapsulation of Lactobacillus paracasei by spray freeze drying

Probiotic bacteria: Selective enumeration and survival in dairy foods

Ultrasonic preparation of stable flax seed oil emulsions in dairy systems-physicochemical characterization

Use of whey protein isolate and gum Arabic for the coencapsulation of probiotic Lactobacillus plantarum and phytosterols by complex coacervation: Enhanced viability of probiotic in Iranian white cheese

Specific energy consumption in microwave drying of garlic cloves

Encapsulation of probiotic Lactobacillus bulgaricus in alginate-milk microspheres and evaluation of the survival in simulated gastrointestinal conditions

Encapsulation of Lactobacillus bulgaricus in carrageenan-locust bean gum coated milk microspheres with double layer structure

Viability of L. acidophilus microcapsules and their application to buffalo milk yoghurt

Spray drying of skim milk mixed with milk permeate: Effect on drying behavior, physicochemical properties, and storage stability of powder

Spray chill encapsulation of flavors within anhydrous erythritol crystals. LWT-Food Science and Technology

Immune response and intestinal permeability in children with acute gastroenteritis treated with Lactobacillus rhamnosus GG: A randomized, double-blind, placebo-controlled trial

Development of carboxymethyl cellulosechitosan hybrid micro-and macroparticles for encapsulation of probiotic bacteria

On the encapsulation and viability of probiotic bacteria in edible carboxymethyl cellulose-gelatin water-in-water emulsions

Survivability assessment of Saccharomyces boulardii in a symbiotic system using nutraceuticals and modified atmosphere packaging

Survivability of probiotics encapsulated in alginate gel microbeads using a novel impinging aerosols method

Evaluation of Lactobacillus rhamnosus GG and Lactobacillus acidophilus NCFM encapsulated using a novel impinging aerosol method in fruit food products

Formulation optimization and evaluation of probiotic Lactobacillus sporogenes-loaded sodium alginate with carboxymethyl cellulose mucoadhesive beads using design expert software

Development of microencapsulation delivery system for long-term preservation of probiotics as biotherapeutics agent

A novel human-like collagen hydrogel scaffold with porous structure and sponge-like properties

Impact of milk protein type on the viability and storage stability of microencapsulated Lactobacillus acidophilus NCIMB 701748 using spray drying

Production and characterization of microparticles containing pectin and whey proteins

Influence of lyophilization, fluidized bed drying, addition of protectants, and storage on the viability of lactic acid bacteria

Fluidized-bed drying as a feasible method for dehydration of Enterococcus faecium M74

Encapsulation of probiotic Bifidobacterium longum BIOMA 5920 with alginate-human-like collagen and evaluation of survival in simulated gastrointestinal conditions

Encapsulation of probiotic bacteria with alginate-starch and evaluation of survival in simulated gastrointestinal conditions and in yoghurt

Microencapsulation and antimicrobial activity of carvacrol in a pectin-alginate matrix

Evaluation of chitosan/alginate beads using experimental design: Formulation and in vitro characterization

The role of oxygen in the viability of probiotic bacteria with reference to L. acidophilus and Bifidobacterium spp

Evaluation of Chios mastic gum as antimicrobial agent and matrix forming material targeting probiotic cell encapsulation for functional fermented milk production

Enhanced viability of probiotic Saccharomyces boulardii encapsulated by layer-by-layer approach in pH responsive chitosan-dextran sulfate polyelectrolytes

Encapsulation and subsequent freezedrying of Lactobacillus reuteri CRL 1324 for its potential inclusion in vaginal probiotic formulations

Water sorption and glass transition temperature of spray dried açai (Euterpe oleracea Mart.) juice

Probiotic functional foods: Survival of probiotics during processing and storage

Fermentation of banana media by using κ-carrageenan immobilized Lactobacillus acidophilus

studies on the fermentation of tomato juice by using κ-carrageenan immobilized lactobacillus acidophilus

Critical water activity for the preservation of Lactobacillus bulgaricus by vacuum drying

Technology of mammalian cell encapsulation

Probiotics, prebiotics, synbiotics, postbiotics, and obesity: current evidence, controversies, and perspectives

Combined microwave-hot air drying of peeled longan

Functional Enhancement of bioactives from black beans and Lactic Acid Bacteria into an innovative food ingredient by comicroencapsulation

Co-microencapsulation of Lactobacillus plantarum and DHA fatty acid in alginate-pectin-gelatin biocomposites

Invited review: Spray-dried dairy and dairy-like emulsions-compositional considerations

Microwave-Assisted Drying of Foods-Equipment

Survival and shelf life of Lactobacillus lactis 1464 in shrimp feed pellet after fluidized bed drying. Agriculture and Natural Resources

Improving acid resistance and characteristics of microencapsulated Lactobacillus brevis RK03 using top fluid bed drying technology

Production and characterization of liquid-core capsules made from cross-linked acrylamide copolymers for biotechnological applications

Resistant starch content, molecular structure and physicochemical properties of starches in Virginia-grown corn, potato and mungbean

Enhanced viability of probiotics (Pediococcus pentosaceus Li05) by encapsulation in microgels doped with inorganic nanoparticles

An alternative way to encapsulate probiotics within electrospun alginate nanofibers as monitored under simulated gastrointestinal conditions and in kefir

Microencapsulated Lactobacillus rhamnosus GG in whey protein and resistant starch matrices: Probiotic survival in fruit juice

3D printing of encapsulated probiotics: Effect of different post-processing methods on the stability of Lactiplantibacillus plantarum (NCIM 2083) under static in vitro digestion conditions and during storage

Microencapsulation of Lactobacillus acidophilus NCIMB 701748 in matrices containing soluble fibre by spray drying: Technological characterization, storage stability and survival after in vitro digestion

Electrospray assisted fabrication of hydrogel microcapsules by single-and double-stage procedures for encapsulation of probiotics

Microencapsulation of probiotics in multi-polysaccharide microcapsules by electro-hydrodynamic atomization and incorporation into ice-cream formulation

Influence of trehalose and moisture content on survival of Lactobacillus salivarius subjected to freeze-drying and storage

Effects of media, heat adaptation, and outlet temperature on the survival of Lactobacillus salivarius NRRL B-30514 after spray drying and subsequent storage

Calcium alginate-resistant starch mixed gel improved the survival of Bifidobacterium animalis subsp. lactis Bb12 and Lactobacillus rhamnosus LBRE-LSAS in yogurt and simulated gastrointestinal conditions

Overview of microencapsulates for use in food products or processes and methods to make them