key: cord-0720703-o46cwmqa
authors: Ikram, Rabia; Mohamed Jan, Badrul; Abdul Qadir, Muhammad; Sidek, Akhmal; Stylianakis, Minas M.; Kenanakis, George
title: Recent Advances in Chitin and Chitosan/Graphene-Based Bio-Nanocomposites for Energetic Applications
date: 2021-09-25
journal: Polymers (Basel)
DOI: 10.3390/polym13193266
sha: af886820d279a314b6f62180b60d969929867ba4
doc_id: 720703
cord_uid: o46cwmqa

Herein, we report recent developments in order to explore chitin and chitosan derivatives for energy-related applications. This review summarizes an introduction to common polysaccharides such as cellulose, chitin or chitosan, and their connection with carbon nanomaterials (CNMs), such as bio-nanocomposites. Furthermore, we present their structural analysis followed by the fabrication of graphene-based nanocomposites. In addition, we demonstrate the role of these chitin- and chitosan-derived nanocomposites for energetic applications, including biosensors, batteries, fuel cells, supercapacitors and solar cell systems. Finally, current limitations and future application perspectives are entailed as well. This study establishes the impact of chitin- and chitosan-generated nanomaterials for potential, unexplored industrial applications.

In recent decades, nanotechnology advancements have led towards the progressive recycling of natural polymers into a variety of structurally enhanced nanomaterials [1, 2] . This has been proven by the synthesis of polymer-based carbon nanomaterials (CNMs) [3] . The implication of CNMs has been established through various fields, such as biological activities [4] , drug delivery [5] , tissue engineering [6] , environmental [7] or energetic applications [8] . Their unique properties have allowed them to be used in several electronic devices [9] . It has been observed that dipole-dipole interactions between molecules and powerful van der Waals forces have produced aggregation among CNMs [10] . Fortunately, the consequences of this limitation, such as the modification of electrical, chemical and mechanical properties, have been modified through functionalization [11] . Graphene is an excellent example of a CNM due to its remarkable attributes, including a large surface area, low weight and excellent thermal as well as mechanical properties [12, 13] .

Polysaccharides are natural polymeric biomaterials that have been widely used in biotechnological fields due to their availability, biocompatibility and biodegradability [14, 15] . Common examples of polysaccharides are starch, cellulose, chitin and chitosan [16] . They can also be modified either chemically or enzymatically for any specific end use. Recently, chitin and chitosan have been used in various applications, including food and nutrition, pharmaceuticals, and biotechnology [17, 18] . Owing to its biocompatibility, chitosan has also been deemed a suitable material for wastewater treatment, as well as for medicinal and electrochemical applications [19, 20] . As nanotechnology advances, the fabrication of chitosan nanocomposites with organic and inorganic nanofillers has significantly improved the material's mechanical, chemical and barrier properties [21] . These remarkable results are squandered as there are no works in the literature that study systematic nanostructures, novel bio-nanocomposite possibilities and their associated fabrication processes, which are needed. As a result, this study aims to bridge that gap by presenting future trends as well as challenges associated with chitin and chitosan as a matrix for bio-nanocomposites.

Over the past few years, chitin-and chitosan-derived nanocomposites have shown a tendency towards a wide range of applications. Recently, chitin-and chitosan-based nanomaterials and their remarkable role as dye adsorbents [22] , drug delivery vehicles to combat COVID-19 [23] , food packaging [24] , membranes [25] , wound dressings [26] and for biomedical and environmental applications [27, 28] have been presented.

To the best of our knowledge, there have been very limited studies which have summarized, in particular, chitin-and chitosan-based nanocomposites for energy-related applications. This work is briefly organized into the background of graphene and graphene oxide (GO) properties as well as the structural properties of chitin/chitosan. In addition, common methods for the fabrication of chitin-and chitosan-derived graphene bionanocomposites have been discussed. Finally, it reveals vital information of chitin/chitosan bio-nanocomposites for applications in electronic devices and energy systems. To make it more instructive, this study also presents future recommendations and challenges of current times.

Research related to compatible two-dimensional (2D) CNMs, such as graphite and diamonds, has expanded [29] . Graphene, which is derived from graphite, has been used in a variety of applications. Single-layer graphene was explored theoretically by P. R. Wallace in 1947. It was first unambiguously produced and identified in 2004 [30, 31] . Many efforts have been made to mass-produce graphene in selected industries, particularly materials science and chemistry [32] . According to recent price checks, allocated budgets for graphene fabrication and the production of its derivatives reached $67 million in 2015, and are estimated to increase to $680 million by 2020 [33] . Graphene is composed of a single layer of hexagonal graphite with sp 2 -hybridized carbons and sigma connections [34] . Furthermore, delocalized π-type bonds are formed from the remaining p or σ orbitals. It has a two-dimensional structure composed of a layer of carbon atoms that are covalently connected in the form of hexagonal lattices [35] . This is the fundamental structure of many carbon allotropes [36] .

Graphene possesses unique properties, such as a 1.42 Å carbon-carbon connection interval, a 3.3 Å thickness, a large surface area, high movement ability and significant optical, mechanical, electrical and thermal properties [37, 38] . Meanwhile, GO was produced by the oxidation of graphite, which is composed of graphene and other functional groups, such as -C=O, -OH, -COOH and -COC- [39] . The existence of oxygenated functional groups on the surface of GO has caused it to have higher capacitance than graphene despite having a smaller surface area [40] . Both GO and reduced graphene oxide (rGO) have great potential to be used in energy-related applications due to their high capacitance, impressive efficiency and enhanced properties as compared to graphene [41, 42] . A wide range of synthetic methods have been utilized to convert graphene from waste materials, which are presented in Figure 1 .

Chitosan, the world's second most abundant biopolymer [43] , is composed of Nacetyl glucosamine and glucosamine residues [44] . It is a valuable polymer as it can be easily obtained from marine wastes, including crustaceans and microorganisms such as fungi [45] . Chitosan can be produced in a variety of molecular weights (MWs) and degrees of de-acetylation (DA). Following the DA process, chitosan has been extracted from the solution in the form of powder, fiber and sponges [46] . The solubility of chitosan has a large influence on the ionic concentration, MW, pH, acid nature, DA and distribution of acetyl groups, as well as the main chain. Chitosan is usually dissolved in weak acids, most 

Chitosan, the world's second most abundant biopolymer [43] , is composed of N-acetyl glucosamine and glucosamine residues [44] . It is a valuable polymer as it can be easily obtained from marine wastes, including crustaceans and microorganisms such as fungi [45] . Chitosan can be produced in a variety of molecular weights (MWs) and degrees of de-acetylation (DA). Following the DA process, chitosan has been extracted from the solution in the form of powder, fiber and sponges [46] . The solubility of chitosan has a large influence on the ionic concentration, MW, pH, acid nature, DA and distribution of acetyl groups, as well as the main chain. Chitosan is usually dissolved in weak acids, most notably 1% of 0.1 M acetic acid [47] . Furthermore, chitosan can be dissolved in water in the presence of glycerol 2-phosphate at a neutral pH [48] . This type of chitosan is appropriate for plant-based applications [49] . A stable solution can be obtained at room temperature. On the other hand, it endorses reversible gel formation above 40 °C. In comparison to chitin, chitosan possesses better complex-forming ability, which has been attributed primarily to the existing free -NH2 groups distributed along its main chain ( Figure 2 ) [50] . Chitosan, a partially deacetylated chitin product, is a copolymer composed of β-(1→4)-2acetamido-D-glucose and β-(1→4)-2-amino-D-glucose units [51] . In chitosan structure, the R1, R2 and R3 radicals correspond to hydrogen available in plain chitin and chitosan molecules. These surface groups result in the formation of hydroxyl (OH) and amino (NH2) groups. They are accountable for the organic modifications of chitosan, which have the potential to produce polymeric derivatives of these compounds [52] . 

Chitosan, the world's second most abundant biopolymer [43] , is composed of N-acetyl glucosamine and glucosamine residues [44] . It is a valuable polymer as it can be easily obtained from marine wastes, including crustaceans and microorganisms such as fungi [45] . Chitosan can be produced in a variety of molecular weights (MWs) and degrees of de-acetylation (DA). Following the DA process, chitosan has been extracted from the solution in the form of powder, fiber and sponges [46] . The solubility of chitosan has a large influence on the ionic concentration, MW, pH, acid nature, DA and distribution of acetyl groups, as well as the main chain. Chitosan is usually dissolved in weak acids, most notably 1% of 0.1 M acetic acid [47] . Furthermore, chitosan can be dissolved in water in the presence of glycerol 2-phosphate at a neutral pH [48] . This type of chitosan is appropriate for plant-based applications [49] . A stable solution can be obtained at room temperature. On the other hand, it endorses reversible gel formation above 40 °C. In comparison to chitin, chitosan possesses better complex-forming ability, which has been attributed primarily to the existing free -NH2 groups distributed along its main chain ( Figure 2 ) [50] . Chitosan, a partially deacetylated chitin product, is a copolymer composed of β-(1→4)-2acetamido-D-glucose and β-(1→4)-2-amino-D-glucose units [51] . In chitosan structure, the R1, R2 and R3 radicals correspond to hydrogen available in plain chitin and chitosan molecules. These surface groups result in the formation of hydroxyl (OH) and amino (NH2) groups. They are accountable for the organic modifications of chitosan, which have the potential to produce polymeric derivatives of these compounds [52] . Crustacean shell wastes are a source of biomass raw material for chitin and chitosan production. They contain chitin, lipids, inorganic salts and proteins, as displayed in Figure 3 [54] . Numerous characterization techniques, such as SEM, FTIR, DSC, TGA, 1H liquid-state NMR, XRD and elemental analysis have been used to investigate morphological, structural, degree of DA, crystallinity and other physicochemical or thermal properties [50, 55] . Crustacean shell wastes are a source of biomass raw material for chitin and chitosan production. They contain chitin, lipids, inorganic salts and proteins, as displayed in Figure  3 [54] . Numerous characterization techniques, such as SEM, FTIR, DSC, TGA, 1H liquidstate NMR, XRD and elemental analysis have been used to investigate morphological, structural, degree of DA, crystallinity and other physicochemical or thermal properties [50, 55] . 

The distribution of materials in polymeric matrices has a significant influence on the mechanical, thermal and electrical properties of nanocomposites, as well as their water vapor permeability [56] . Poor distribution of biopolymer-graphene/GO produces unstable nanocomposites, and jeopardizes their properties. The aggregation of graphene/GO nanoparticles and restacking into biopolymeric materials has been a concerning issue [57] . For example, water-soluble polymers such as poly(vinyl alcohol) and poly(ethylene oxide) have been used in the fabrication of GO nanocomposites [58] . Earlier studies have revealed that graphene/GO fillers were incorporated into polymer matrices through common methods, such as solution intercalation, electrospinning and in situ intercalative polymerization, as shown in Figure 4 [59, 60] . 

The distribution of materials in polymeric matrices has a significant influence on the mechanical, thermal and electrical properties of nanocomposites, as well as their water vapor permeability [56] . Poor distribution of biopolymer-graphene/GO produces unstable nanocomposites, and jeopardizes their properties. The aggregation of graphene/GO nanoparticles and restacking into biopolymeric materials has been a concerning issue [57] . For example, water-soluble polymers such as poly(vinyl alcohol) and poly(ethylene oxide) have been used in the fabrication of GO nanocomposites [58] . Earlier studies have revealed that graphene/GO fillers were incorporated into polymer matrices through common methods, such as solution intercalation, electrospinning and in situ intercalative polymerization, as shown in Figure 4 [59, 60] . Most researchers have used a solution intercalation method, in which the chemical structure of a polymer matrix changed as the amount of graphene/GO increased [62] . This was attributed to the occurrence of mild chemical reactions, primarily physical interac- Most researchers have used a solution intercalation method, in which the chemical structure of a polymer matrix changed as the amount of graphene/GO increased [62] . This was attributed to the occurrence of mild chemical reactions, primarily physical interactions between biopolymers and graphene/GO [60] . Characteristically, this method involves shear mixing of colloidal graphene/GO suspensions with polymers, followed by solvent evaporation. As a result, the adsorbed polymer reassembled, forming a sandwich between the polymer and graphene/GO [63] . Furthermore, polymer-graphene/GO matrices were used in solution-based methods with non-water-soluble polymers via the chemical modification of GO [64] . Poly(methyl methacrylate) and polyurethanes are two examples of non-soluble polymers that have been used in this method [65] . Another interesting method of preparing graphene/GO bio-nanocomposites is in situ polymerization, which uses solvents to lower the dispersions' viscosity [66] . For example, GO has prepared nanocomposites with enhanced properties by intercalative polymerization of poly(methylmethacrylate) [67] and epoxy resins [68] . Furthermore, polyethylene [69] and polypropylene matrix GO nanocomposites [70] have been successfully prepared via in situ polymerization.

Poly(methylmethacrylate) chains were grafted onto GO to make the filler compatible with the polymeric matrix [71] . The melt-blending method has been used to disperse thermally reduced GO into polymers as well as into a renewable polylactide [72] . Satisfactory distribution rates are attainable through this process. However, it increases polymer melt viscosity, which complicates the process. The preparation of polymer composites, such as graphite, into polypropylene has been done by solid-state shear dispersion using a modified twin-screw extruder [73] . Table 1 entails the synthesis of graphene nanocomposites, comprising polymeric and other matrices, for an enormous number of applications. Table 1 . Summary of the graphene nanocomposites with inorganic and polymeric materials.

Ref.

Three-dimensional graphene-based polymer nanocomposite Three methods were used;

• • Used for rapid and sensitive electrochemical method to determine trace 4-NP in water [98] Chitin and Chitosan Graphene Bio-Nanocomposites GO is an oxidized and hydrophilic form of graphene which greatly enhances functionalities of polymeric matrices [99] . Both graphene and GO are commonly utilized as a nanofiller in polymeric nanocomposites. Chemical modification of graphene has resulted in high-performance nanocomposites with enriched characteristics [100] . Several techniques have been employed to evenly disseminate graphene or GO into chitosan matrices by developing physical/chemical linkages [101] .

Chitosan is a green, sustainable and low-cost material. Chitosan-derived nanocomposites have captivated the interest of many researchers due to their exceptional chemical and physical properties [102] . Advances in nanotechnology has led to nanoparticles being deposited on the surface of chitosan. Apart from being used as a pure matrix biomaterial, other nanoparticles have been embedded in bulk materials. Due to chitosan's hydroxyl (OH) and amine (NH 2 ) surface groups, it encourages several inter-and intramolecular hydrogen bond formations [103] . It allows the usage of inorganic and organic fillers, which improves functionalization [104] .

Some researchers have doped graphene/GO bio-nanocomposites with starch, chitosan, cellulose and poly(hydroxyalkanoates) [105] . New techniques, such as emulsion droplet coalescence, sieving and spray drying have been applied for the fabrication of chitosan-based products, which are primarily used in medical and pharmaceutical applications [106, 107] . The development of new nanocomposite materials continues to be hampered for agricultural applications; however, it is feasible if the source material is equally inexpensive and compatible. Nonetheless, due to chitosan's properties, it has been used in the fabrication of suitable nanocomposites [108] .

Ionic gelation and spray drying are regarded as the best protocols for large-scale CNM production [109] . The ionic gelation method involves the interaction of positively charged chitosan amino groups with negatively charged tripolyphosphate (TTP). TTP is an anionic crosslinker that forms nanoparticles by interacting with chitosan molecules. It is non-toxic and devoid of any innate biological activity. As a result, it is widely used in the production of CNMs [110] . The resulting nanocomposites have been used for foliar applications.

According to a study on the chitosan-rGO nanocomposite, rGO was incorporated into the chitosan crystalline network to improve the adsorption and dye attraction properties of fabricated nanocomposites [111] . At 6 wt.% of rGO nanocomposite, tensile strength, Young's modulus, elongation at break and conductivity values were increased. However, aggregation occurred at 7 wt.% of rGO, and nanocomposite film conductivity was decreased [112] .

Another study on the chitosan-GO nanocomposite reported the existence of a strong interaction between GO and chitosan [113] . An FTIR analysis revealed two peaks, one of which was the amine stretch of chitosan, and the other belonged to the OH group of GO. The fabricated nanocomposites showed properties that were identical to chitosan and GO. Peaks associated with the C=C bonds of GO moved to lower wavenumbers. It occurred due to hydrogen bonding between GO and the chitosan network [114] . In the XRD study, GO was completely exfoliated when the diffraction angles of the chitosan-GO composite were similar to those of the chitosan film. Furthermore, the presence of GO in the composite resulted in lower crystallinity due to a longer combination period [115] . Figure 5 represents the fabrication of the chitosan/GO nanocomposite through ultrasonication for 30 and Cobos et al. prepared free-standing chitosan-GO nanocomposite films [117] . During the process, GO was dispersed homogenously in chitosan due to the amide linkage formation between carboxylic acid groups of GO and amine groups of chitosan. As compared to pure chitosan, the glass transition temperature of the chitosan-graphene nanocomposite was increased from 118 °C to 158 °C [118] . Furthermore, the tensile strength and Young's modulus of synthesized nanocomposite was increased by 2.5 and 4.6 times, respectively [119] . In a very recent study, Zhang et al. have synthesized functionalized GO (fGO), by combining chitosan and ionic liquid, for use as an electrochemical sensor, which is displayed in Figure 6 . This novel electrochemical senor has been successfully utilized for amaranth detection in commercial beverages, with excellent results [120] . Cobos et al. prepared free-standing chitosan-GO nanocomposite films [117] . During the process, GO was dispersed homogenously in chitosan due to the amide linkage formation between carboxylic acid groups of GO and amine groups of chitosan. As compared to pure chitosan, the glass transition temperature of the chitosan-graphene nanocomposite was increased from 118 • C to 158 • C [118] . Furthermore, the tensile strength and Young's modulus of synthesized nanocomposite was increased by 2.5 and 4.6 times, respectively [119] . In a very recent study, Zhang et al. have synthesized functionalized GO (fGO), by combining chitosan and ionic liquid, for use as an electrochemical sensor, which is displayed in Figure 6 . This novel electrochemical senor has been successfully utilized for amaranth detection in commercial beverages, with excellent results [120] . 

The enhanced properties of polymeric materials with metal oxide nanoparticles into composite electrodes have been optimized through the long, linear backbones of chitin and chitosan for electronic devices [121] . This type of synthesis has been conducted to create a hierarchical assembly which connects nanoscopic metal oxide particles to the 

The enhanced properties of polymeric materials with metal oxide nanoparticles into composite electrodes have been optimized through the long, linear backbones of chitin and chitosan for electronic devices [121] . This type of synthesis has been conducted to create a hierarchical assembly which connects nanoscopic metal oxide particles to the macro-scale structure of chitosan through electrochemical deposition [122] . Further studies are focused on the MW of chitin and chitosan, which has effected the capacitive behavior and cyclic stability on electrodeposited thin films [19, 123] .

Chitin and chitosan have emerged as significant polymers for the production of soft materials. This is due to the combination of physicochemical characteristics of biopolymers that enables the hierarchical assembly of nano-sized components at different length scales [124] . The characteristics of chitin and chitosan are influenced by the amount of glucosamine repeating units, crystallinity and degree of DA [125] .

The development of high-performance composite materials has been expedited by incorporating inorganic "nano-fillers" into polymers. Conventionally, the uses of polymerinorganic nanocomposites include mechanical, optical, catalytic, magnetic, thermal, electrical and electrochemical applications [126, 127] . It is highly desired to attain cost-effective and high-tech functionalized electronic devices for commercial uses. Hence, metal-filled polymer composites are seen as a viable option to meet the requirements of future dielectric technologies [128] .

Nanoparticles are engineered to sustain high electron mobility in order to achieve fast field responses with extraordinary dielectric constants and minimal losses in highfrequency applications [129] . The engineered bio-nanocomposite dielectrics have higher dielectric constants at elevated frequencies and can process polymers at low temperatures as compared to other conventional materials (Figure 7 ) [130] . Chitosan is preferred in current research prospects due to its ease of accessibility, low cost, environmental friendliness and outstanding mechanical characteristics [131] . In recent years, CNMs such as carbon nanotubes (CNTs) and graphite have been tremendously used among several electronic devices [133] . Metal oxides, such as ZnO, SiO, NiO and TiO2, are typically doped as inorganic nano-fillers for electrical and electrochemical purposes [134] . The dielectric characteristics of NiO have been utilized in the form of nano-fillers for a handful of studies. NiO is a Mott-Hubbard insulator with an extremely low conductivity at ambient temperatures, and has a cubic lattice parameter of 0.4177 nm [135] . However, when the size is lowered to nanoscale, the conductivity of NiO increases significantly due to hole hopping associated with Ni 2+ vacancies. By incorporating these fillers into non-conducting polymers, they have transformed into conductive polymers while preserving their polymeric properties [136] . In recent years, CNMs such as carbon nanotubes (CNTs) and graphite have been tremendously used among several electronic devices [133] . Metal oxides, such as ZnO, SiO, NiO and TiO 2, are typically doped as inorganic nano-fillers for electrical and electrochemical purposes [134] . The dielectric characteristics of NiO have been utilized in the form of nano-fillers for a handful of studies. NiO is a Mott-Hubbard insulator with an extremely low conductivity at ambient temperatures, and has a cubic lattice parameter of 0.4177 nm [135] . However, when the size is lowered to nanoscale, the conductivity of NiO increases significantly due to hole hopping associated with Ni 2+ vacancies. By incorporating these fillers into non-conducting polymers, they have transformed into conductive polymers while preserving their polymeric properties [136] .

Nasrollahzadeh et al. studied in great depth the possibilities of chitin and chitosan as length-scale interconnects. Among the linear carbon backbone of biopolymers, chitosan has provided a location for nanocomponents/fillers linkage within the range of 100-101 nm [137] . The biopolymer exhibits self-organizing properties contributed from the chitosan's stimuli-responsive film and gel-forming characteristics at microscale levels. Therefore, assembly at greater length scales, i.e., 103 nm, is enabled [138] . Furthermore, localized electrical stimulation promotes the formation of chitin-and chitosan-based films and gels. As a result, both the length scale and nanoscale components of chitosan were linked to electrical equipment. Finally, the metal binding capabilities of chitosan enabled linkages through chelation processes [139] . Kamran et al. have discovered acetic-mediated chitosanbased porous CNMs, which resulted in the capture of CO 2 . They also demonstrated an enhanced surface area (4168 m 2 g −1 ) and highly effective CO 2 adsorption performance of fabricated nanomaterials [140] . Currently, there are minimal studies in the literature on the electrochemical behavior and energy production of such novel bio-nanocomposites.

Recently, there has been remarkable use of cost-effective and economic biosensors in energy-related applications [141] . High-quality immobilization of biological recognition components is required to generate dependable biosensors. Chitosan and its bionanocomposites have been introduced as effective immobilization matrix materials. Thus, development of novel devices for early-stage illness diagnosis and biomarker detection were possible through these chitosan-bio-nanocomposites-based biosensors (Figure 8 ) [142] . Fartas et al. have employed graphene/gold nanoparticle/chitosan (GAuCS) nanocomposite films for glucose biosensing. The sensor was designed to immobilize glucose oxidase in thin films of GAuCS nanocomposites at gold electrodes [144] . Likewise, Casteleijn et al. used a simple spin-coating method to modify chitin-based biosensors on Au nanoparticles and polystyrene (PS). Due to chitin's solubility, this method opened a new domain of future possibilities [145] . The substantial binding of chitin has encouraged strong functionalization for the fabrication of biosensors. Hence, scientists have developed a novel Co 2+ -metal-ion-based plasmon resonance surface sensor through chitin composites for enhanced sensitivity detection [146] .

Besides, Ali et al. created a low-temperature H2S gas sensor using a conductive chitosan-CuO hybrid nanocomposite at different concentrations ranging from 1-9% volume/volume (v/v). The chitosan bio-nanocomposite resulted in a sufficiently flexible and transparent semiconductor. The detecting mechanism of the sensor occurs from proton transfer between the gas molecules and amino groups in the chitosan molecule. The presence of glycerol, i.e., OH groups, enhanced the formation of H-bonding [147] . Borgohain Fartas et al. have employed graphene/gold nanoparticle/chitosan (GAuCS) nanocomposite films for glucose biosensing. The sensor was designed to immobilize glucose oxidase in thin films of GAuCS nanocomposites at gold electrodes [144] . Likewise, Casteleijn et al. used a simple spin-coating method to modify chitin-based biosensors on Au nanoparticles and polystyrene (PS). Due to chitin's solubility, this method opened a new domain of future possibilities [145] . The substantial binding of chitin has encouraged strong functionalization for the fabrication of biosensors. Hence, scientists have developed a novel Co 2+ -metal-ion-based plasmon resonance surface sensor through chitin composites for enhanced sensitivity detection [146] .

Besides, Ali et al. created a low-temperature H 2 S gas sensor using a conductive chitosan-CuO hybrid nanocomposite at different concentrations ranging from 1-9% vol-ume/volume (v/v). The chitosan bio-nanocomposite resulted in a sufficiently flexible and transparent semiconductor. The detecting mechanism of the sensor occurs from proton transfer between the gas molecules and amino groups in the chitosan molecule. The presence of glycerol, i.e., OH groups, enhanced the formation of H-bonding [147] .

Borgohain et al. have created a pollution sensor that helped to detect Zn 2+ and Cu 2+ ions at different concentrations in water. The co-precipitation method was utilized to make chitosan-ZnS quantum dot (QD) sensors. The formation of chitosan-ZnS QD tiny clusters was dependent on the concentration of metal ions in water, with a directly proportional relationship. As a result of the aggregated clusters, the absorption maxima occurred at longer wavelengths, and resulted in reduced energy [148] .

LIBs have become important energy storage systems, especially in the usage of portable electronic devices. Their excellent properties, such as high energy density and low self-discharge rates, are repeatedly noticed [149] . As a result, comprehensive studies on novel electrode materials which are compatible with LIB electrolytes are highly crucial in the advancement of technologies [150] .

Using a simple chitosan-assisted hydrothermal and subsequent calcination methods, Ma et al. have developed ultrathin MoS 2 /graphene hetero-structures with high specific surface areas and efficient electrochemical characteristics [151] . Similarly, Chen et al. have introduced a N-doped carbon composite as a cathode material and CNT/chitosan as an amplified separator for innovative lithium-sulfur batteries (LSBs). This simple and effective method is expected to represent a watershed moment for the large-scale manufacturing of hetero-structures with a wide range of applications in batteries [152] . Moreover, Kim et al. have utilized a rGO/chitosan-based binder which has allowed significant improvement in the cycle stability and capacity of LSBs [153] .

Other noteworthy and novel fabricated materials with high electrochemical properties among very recent works include a chitosan-solution-based Si@SiO 2 @N-Carbon anode for LIBs [154] , flexible chitosan-based carbon membranes as anodes for potassium-and sodiumion batteries (KIBs/SIBs) [155] , a chitosan-based N-doped carbon/Li 2 ZnTi 3 O 8 /TiO 2 composite as an anode for LIBs [156] , a chitosan-based C@V 2 O 5 cathode for Zn-ion batteries (ZIBs) [157] , a chitosan-based N-doped rGO/C@Si composite for LIBs as shown in Figure 9 [158] and novel S/Se/C supported by a chitosan-based interconnect with CNTs for novel lithium-chalcogenide batteries (NCBs) [159] .

Fuel cells modified with membranes via proton exchange have been displayed as a promising alternative in eco-friendly energy-related fields. The development of a highly conductive proton membrane is the most important aspect that determines the performance and efficiency of fuel cells [160] . To degrade chitin anaerobically, Li et al. created a microbial fuel cell using Aeromonas hydrophila. It was observed that the constructed fuel cell resulted in a seven times faster rate of chitin breakdown as compared to a conventional fermentation system [161] . Yang et al. introduced a low-cost Fe-N-C catalyst, resulting from an Fe(III)-chitosan hydrogel, to improve power generation in microbial fuel cells [162] . Thus, increased power generation was ensured. This approach allowed for the effective breakdown of resistant biomass in order to recover energy [163] . Researchers have reported a chitosan/rGO/polyaniline bio-nanocomposite to be a paradigm bio-anode for glucose-derived fuel cells. It exhibited excellent electrochemical properties with considerable stability [164] . Gorgieva et al. examined an effective chitosan-based N-doped rGO composite membrane for alkaline fuel cells. In this work, chitosan-and graphene-based homogenous materials were engineered using a variety of self-induced methods [165] .

Furthermore, a cost-effective method was applied to assemble chitosan/montmorillonite nanocomposite using a ceramic support as an effective membrane for microbial fuel cells [166] . In another study, chitosan was cross-linked to poly(aminoanthraquinone) nanocomposite which was a nitrogen-precursor-based Fe-N-C oxygen reduction catalyst for microbial fuel cells. The high-performance bio-anode in the fuel cell exhibited outstanding shape and retention characteristics due to its synergistic effects between porous structures [167] . This highly porous design along with anode materials have resulted in a 78-fold increase in maximum power density. Other noteworthy and novel fabricated materials with high electrochemical properties among very recent works include a chitosan-solution-based Si@SiO2@N-Carbon anode for LIBs [154] , flexible chitosan-based carbon membranes as anodes for potassiumand sodium-ion batteries (KIBs/SIBs) [155] , a chitosan-based N-doped carbon/Li2ZnTi3O8/TiO2 composite as an anode for LIBs [156] , a chitosan-based C@V2O5 cathode for Zn-ion batteries (ZIBs) [157] , a chitosan-based N-doped rGO/C@Si composite for LIBs as shown in Figure 9 [158] and novel S/Se/C supported by a chitosan-based interconnect with CNTs for novel lithium-chalcogenide batteries (NCBs) [159] . 

Fuel cells modified with membranes via proton exchange have been displayed as a promising alternative in eco-friendly energy-related fields. The development of a highly conductive proton membrane is the most important aspect that determines the performance and efficiency of fuel cells [160] . To degrade chitin anaerobically, Li et al. created a microbial fuel cell using Aeromonas hydrophila. It was observed that the constructed fuel cell resulted in a seven times faster rate of chitin breakdown as compared to a conventional fermentation system [161] . Yang et al. introduced a low-cost Fe-N-C catalyst, resulting from an Fe(III)-chitosan hydrogel, to improve power generation in microbial fuel cells [162] . Thus, increased power generation was ensured. This approach allowed for the effective breakdown of resistant biomass in order to recover energy [163] . Researchers have reported a chitosan/rGO/polyaniline bio-nanocomposite to be a paradigm bio-anode for glucose-derived fuel cells. It exhibited excellent electrochemical properties with considerable stability [164] . Gorgieva et al. examined an effective chitosan-based N-doped rGO composite membrane for alkaline fuel cells. In this work, chitosan-and graphene- Vijayalekshmi et al. created a cross-linked, flexible, oxidative and thermally stable chitosan-based green polymer electrolyte using methane, sulfonic acid and sodiumdodecylbenzene-sulfonic-acid-doped chitosan. At 100 • C, the polymer electrolyte had a conductivity of 4.67 × 10 −4 S/cm and thermal stability at a maximum value of 260 • C [167] . In short, this low-cost and eco-friendly technique ensures superior methanol barrier performance by reducing methanol absorption at higher methanol concentrations for fuel cells, as displayed in Figure 10 Vijayalekshmi et al. created a cross-linked, flexible, oxidative and thermally stable chitosan-based green polymer electrolyte using methane, sulfonic acid and sodium-dodecylbenzene-sulfonic-acid-doped chitosan. At 100 °C, the polymer electrolyte had a conductivity of 4.67 × 10 −4 S/cm and thermal stability at a maximum value of 260 °C [167] . In short, this low-cost and eco-friendly technique ensures superior methanol barrier performance by reducing methanol absorption at higher methanol concentrations for fuel cells, as displayed in Figure 10 [168] . Tohidian et al. applied a simple sol-gel technique to prepare chitosan-surface-modified CNT bio-nanocomposites. Additional benefits of chitosan-coated CNTs include a reduced danger of electronic short-circuiting and improved interaction between CNTs and chitosan, resulting in uniform dispersion [170] . Compared to pure chitosan membranes, bio-nanocomposites showed better thermal stability, proton conductivity and mechanical characteristics. Due to the electrostatic and hydrogen bonding between molecules, bionanocomposites achieved a power density of 98.5 mW cm −2 at 70 °C [171] . Conversely, the reduced conductivity of protons was caused by the amino functional group, which led to less water uptake.

Supercapacitors are a superior type of energy storage device. They exude higher capacitance, power density, durability cycle and stability. Many studies have been devoted Tohidian et al. applied a simple sol-gel technique to prepare chitosan-surface-modified CNT bio-nanocomposites. Additional benefits of chitosan-coated CNTs include a reduced danger of electronic short-circuiting and improved interaction between CNTs and chitosan, resulting in uniform dispersion [170] . Compared to pure chitosan membranes, bio-nanocomposites showed better thermal stability, proton conductivity and mechanical characteristics. Due to the electrostatic and hydrogen bonding between molecules, bionanocomposites achieved a power density of 98.5 mW cm −2 at 70 • C [171] . Conversely, the reduced conductivity of protons was caused by the amino functional group, which led to less water uptake.

Supercapacitors are a superior type of energy storage device. They exude higher capacitance, power density, durability cycle and stability. Many studies have been devoted to presenting novel nanomaterials as electrode materials from sustainable resources, due to their impressive electrochemical performance [122, 172] . Recent research has been dedicated to produce chitosan-based bio-nanocomposites with remarkable properties, such as high power, an outstanding life cycle and an eco-friendly nature as compared to expensive nanoparticles [173, 174] .

A three-step technique which included the aerogel synthesis, aerogel carbonization and nitrogen self-doping processes was used to create chitosan-based supercapacitors for elevated enactment. This bio-nanocomposite showed a specific capacitance of 331 F g −1 in 6 mol L −1 using a KOH electrolyte at 1 A g −1 , with excellent stability of 90% after 10,000 cycles [175] . Major and noteworthy performance values were reached by preparing chitosan-based supercapacitors, which showed specific energy and power density at maximum recorded values of 10.46 Wh kg −1 and 500.08 W kg −1 , respectively [176] . Similarly, Lin et al. have created a chitosan-based hydrogel using an ultrafast hydrogelation technique in which carboxylation of chitosan was carried out at 6, 8 and 10 values, thus producing a supramolecular electrolyte hydrogel with excellent specific capacitance of chitosan, chitosan-6, chitosan-8 and chitosan-10 supercapacitors at 35 F·g −1 , 72.5 F·g −1 , 49.2 F·g −1 and 40.5 F·g −1 , respectively [177] . It was a facile and simple technology which has shown great potential for developing future bio-based supercapacitors.

Following cellulose, chitosan is the most abundant biomass-containing amino-polysac charide on earth. The ability of chitosan to produce a transparent film while maintaining its properties has influenced scientists' interest in designing solar cells [178] . The amine groups on the main chain of chitosan make it a viable option for cathode interlayers, while additional functionalization is added due to the hydroxyl and amino groups throughout the main chain [179] .

Praveen et al. produced organic solar cells with a power conversion efficiency of 5.83% by utilizing layer-by-layer and self-assembled chitosan with a uniform and controllable nanoscale thickness [180] . The engineered solar cells exhibited higher efficiency due to their organized structural form, which produced both interfacial and molecule dipoles. The dipoles reduced the work function of electrodes, which has led to their promising and highly compatible utilization [181] . The self-assembled chitosan has improved performance up from 100 to 200% as compared to spin-coated chitosan interlayers and fuel cells. It was observed without any cathode interlayer, in terms of power conversion and efficacy, respectively ( Figure 11 ) [182] .

mum recorded values of 10.46 Wh kg and 500.08 W kg , respectively [176] . Similarly, Lin et al. have created a chitosan-based hydrogel using an ultrafast hydrogelation technique in which carboxylation of chitosan was carried out at 6, 8 and 10 values, thus producing a supramolecular electrolyte hydrogel with excellent specific capacitance of chitosan, chitosan-6, chitosan-8 and chitosan-10 supercapacitors at 35 F•g −1 , 72.5 F•g −1 , 49.2 F•g −1 and 40.5 F•g −1 , respectively [177] . It was a facile and simple technology which has shown great potential for developing future bio-based supercapacitors.

Following cellulose, chitosan is the most abundant biomass-containing amino-polysaccharide on earth. The ability of chitosan to produce a transparent film while maintaining its properties has influenced scientists' interest in designing solar cells [178] . The amine groups on the main chain of chitosan make it a viable option for cathode interlayers, while additional functionalization is added due to the hydroxyl and amino groups throughout the main chain [179] .

Praveen et al. produced organic solar cells with a power conversion efficiency of 5.83% by utilizing layer-by-layer and self-assembled chitosan with a uniform and controllable nanoscale thickness [180] . The engineered solar cells exhibited higher efficiency due to their organized structural form, which produced both interfacial and molecule dipoles. The dipoles reduced the work function of electrodes, which has led to their promising and highly compatible utilization [181] . The self-assembled chitosan has improved performance up from 100 to 200% as compared to spin-coated chitosan interlayers and fuel cells. It was observed without any cathode interlayer, in terms of power conversion and efficacy, respectively ( Figure 11 ) [182] . Moreover, Zulkifli et al. used a chitosan-based polymer electrolyte to create a highperformance plasmonic dye-sensitized solar cell [184] . Polyethene oxide (PEO) was placed between the TiO 2 /dye photoelectrode and the Pt counter electrode in a chitosan-based solar cell. A simple solution-casting approach was used to add the ion donor NH4I salt. The mixing of chitosan with PEO was performed, which enhanced the flexibility of the electrolyte, the mobility of ions and the conductivity [185] . Thus, the 16.5 wt.% of chitosan and 38.5 wt.% of PEO:NH4I exhibited a significant increase in conductivity, respectively. The dye-sensitized solar cells (DSSC) recorded a 19-fold improvement of overall efficiency from 0.06% to 1.13% by incorporating TiO 2 particles into the cell system [186] . Table 2 summarizes chitosan/chitin-based nanomaterials, their mode of fabrication and utilization in energy-related applications. 

The applications and merits of novel and promising biopolymers, i.e., chitin-and chitosan-based bio-nanocomposites are apparent to mitigate future global issues. Despite having outstanding biological and physiochemical characteristics, the molecule's flaws offer major hurdles and limits to its applicability in a variety of key industries. Therefore, several outlined disadvantages and problems must be addressed to ensure the modification of chitosan-based bio-nanocomposites. There are major thoughtful drawbacks which must be highlighted (Figure 12) , and are outlined below:

The current limitations in the medicinal fields are caused by low solubility and pH, which have led to instable physiological changes among nanocomposites.

The hygiene and safety of synthesized bio-nanocomposites remain uncertain as the European Food Safety Authority (EFSA) denies them, despite possessing an approval for food contact from the Food Development Authority (FDA). • Low colloidal stability makes chitin-and chitosan-based bio-nanocomposites unsuitable for large-scale drug delivery. • Elevated elasticity of chitosan-based bio-nanocomposites restricts their use and applications.

Despite showing satisfactory effectiveness in several medicinal applications, there are numerous issues such as drug release, loading efficacy and capacity, rate of degradation, and functionalization. • Finally, industrial processing centers continue to face financial challenges in establishing a solid commercial viability of sustainable biopolymers in the real world.

The importance of chitosan-based nanocomposites is skyrocketing owing to their plentiful advantages. However, it does have some difficulties that must be overcome. The following section narrates some elements and suggestions for future study and research:

• Nanotechnology has great potential in agro-economics to improve agricultural areas.

In this regard, nano-chitin or nano-chitosan might be powerful tools for delivering environmentally benign nano-chemicals or nano-agro-fertilizers.

Their components can be used to grow crops, manage pests, increase fish output, produce meat, preserve seeds, improve the immune system of crops and develop crops with high drought and salinity resistance, among other elements.

There are very few in vivo studies demonstrating the formulation and conjugation of chitosan-based nano-carriers with antibodies as well as the assessment of long-term toxicity of the nano-carriers. Thus, future research can be conducted on studies of antibodies coupled with chitosan-based nano-carriers.

As metal oxides have shown unique semiconducting, optical and photocatalytic characteristics, chitosan/metal oxide bio-nanocomposites could bring a remarkable change for wound healing and other future regeneration studies. • Chitin and chitosan can be an attractive future research choice as heterogeneous bio-nanocatalysts and kinetic studies. • Due to their physiological pH, chitosan-based bio-nanocomposites have limited solubility. In this situation, researchers should concentrate on developing novel chitosanbased bio-nanocomposite materials with improved solubility and aggregation.

Conventional acid and alkali treatments should be replaced with novel biological methods for chitosan extraction. In competitive industrial situations, eco-friendly and cost-effective extraction methods must also be established. • Crabs, shrimps, insects and fungi are acquiring enormous demand in many industrial areas due to their remarkable characteristics. As these natural resources become more popular, there is a growing worry that they will become extinct. The researchers' mission should be focused on identifying alternate sources of energy in order to restore ecological equilibrium.

Researchers should concentrate on introducing nanomaterials with high degrees of elasticity for novel electronic devices.

Polymers 2021, 13, x FOR PEER REVIEW 19 of 28

• Finally, industrial processing centers continue to face financial challenges in establishing a solid commercial viability of sustainable biopolymers in the real world. 

The importance of chitosan-based nanocomposites is skyrocketing owing to their plentiful advantages. However, it does have some difficulties that must be overcome. The following section narrates some elements and suggestions for future study and research:

• Nanotechnology has great potential in agro-economics to improve agricultural areas.

In this regard, nano-chitin or nano-chitosan might be powerful tools for delivering environmentally benign nano-chemicals or nano-agro-fertilizers.

Their components can be used to grow crops, manage pests, increase fish output, produce meat, preserve seeds, improve the immune system of crops and develop crops with high drought and salinity resistance, among other elements.

There are very few in vivo studies demonstrating the formulation and conjugation of chitosan-based nano-carriers with antibodies as well as the assessment of long-term toxicity of the nano-carriers. Thus, future research can be conducted on studies of antibodies coupled with chitosan-based nano-carriers.

As metal oxides have shown unique semiconducting, optical and photocatalytic characteristics, chitosan/metal oxide bio-nanocomposites could bring a remarkable change for wound healing and other future regeneration studies.

Chitin and chitosan can be an attractive future research choice as heterogeneous bionanocatalysts and kinetic studies. • Due to their physiological pH, chitosan-based bio-nanocomposites have limited solubility. In this situation, researchers should concentrate on developing novel chi- 

To summarize, the hazardous impact of toxic and non-biodegradable materials has caused adverse effects on human health and the environment. Consequently, it has indeed seized the attention of researchers to introduce a variety of bio-nanocomposites. Currently, chitin-and chitosan-derived bio-nanocomposites are the emerging alternates with outstanding functional properties and compatibility. Herein, we have summarized their structural analysis and fabrication into a large number of graphene-based bio-nanocomposites. It was observed that several types of fabrication methods have been utilized which impart different properties for their particular applications. In particular, progressive trends of energetic applications have been elaborated with their impressive attributes towards electronic devices. Finally, we conclude that chitosan-derived graphene bio-nanocomposites have a strong potential for unexplored applications, such as wastewater treatment and environmental pollution, as well as within the oil and gas industry, such as for drilling fluids, mechanical operations, kinetic and computational chemistry. 

The authors declare that there are no conflicts of interest regarding the publication of this manuscript.

Molecularly imprinted polymers: Antibody mimics for bioimaging and therapy

Bioresorbable Polymers: Advanced Materials and 4D Printing for Tissue Engineering

A review of shape memory polymers and composites: Mechanisms, materials, and applications

Biological activities and pharmaceutical applications of polysaccharide from natural resources: A review

Responsive polymers in controlled drug delivery

Conductive polymers: Towards a smart biomaterial for tissue engineering

Sustainable polymers from renewable resources

Cellulose-based nanomaterials for energy applications

Water-evaporation-induced electricity with nanostructured carbon materials

Nitrogen-doped carbon materials

Hydrogen storage in carbon materials-A review

Mechanical properties of graphene and graphene-based nanocomposites

Raman spectroscopy of graphene-based materials and its applications in related devices

Main properties and current applications of some polysaccharides as biomaterials

Polysaccharides/Halloysite nanotubes for smart bionanocomposite materials

Chitin-and Chitosan-Based Derivatives in Plant Protection against Biotic and Abiotic Stresses and in Recovery of Contaminated Soil and Water. Polysaccharides 2020, 1, 21-30

Chitin and chitosan: Properties and applications

Effect of bio-chemical chitosan and gallic acid into rheology and physicochemical properties of ternary edible films

Chitin and chitosan in selected biomedical applications

Physicochemical and antioxidant properties of chitosan films incorporated with cinnamon oil

Production and characterization of a nanocomposite of highly crystalline nanowhiskers from biologically extracted chitin in enzymatic poly (ε-caprolactone)

Applications of chitin and chitosan based biomaterials for the adsorptive removal of textile dyes from water-A comprehensive review

Chitin and chitosan as tools to combat COVID-19: A triple approach

Antimicrobial Biodegradable Food Packaging Based on Chitosan and Metal/Metal-Oxide Bio-Nanocomposites: A Review

Chitosan-Based Membranes Preparation and Applications: Challenges and Opportunities

Gelatin-Based Hybrid Scaffolds: Promising Wound Dressings

Recent advances of emerging green chitosan-based biomaterials with potential biomedical applications: A review

Applications of chitosan in environmental remediation: A review

Carbon nanomaterials for electronics, optoelectronics, photovoltaics, and sensing

An overview of industrial scalable production of graphene oxide and analytical approaches for synthesis and characterization

Electric field effect in atomically thin carbon films

Advances in synthesis of graphene derivatives using industrial wastes precursors; prospects and challenges

Bio-nanocomposites of graphene with biopolymers; fabrication, properties, and applications

Graphene research and their outputs: Status and prospect

Application of graphene in energy storage device-A review

Phononics of graphene and related materials

The chemistry and promising applications of graphene and porous graphene materials

Reduced graphene oxide today

Oxidative Desulfurization of Petroleum Distillate Fractions Using Manganese Dioxide Supported on Magnetic Reduced Graphene Oxide as Catalyst

Recent Advances of Graphene-Derived Nanocomposites in Water-Based Drilling Fluids

3D Graphene materials: From understanding to design and synthesis control

Heteroatom doped graphene engineering for energy storage and conversion

Chitosan derivatives and their application in biomedicine

Chitosan chemistry and pharmaceutical perspectives

Pharmaceutical applications of chitosan

Antimicrobial chitosan and chitosan derivatives: A review of the structure-Activity relationship

Chitosan: An update on potential biomedical and pharmaceutical applications

Application of chitosan and chitosan derivatives as biomaterials

Removal of heavy metal ions using chitosan and modified chitosan: A review

Chitosan-based smart hybrid materials: A physico-chemical perspective

Recent advances in using of chitosan-based adsorbents for removal of pharmaceutical contaminants: A review

Antimicrobial effect of a novel chitosan derivative and its synergistic effect with antibiotics

Modification of Chitosan for the Generation of Functional Derivatives

Chitosan and Derivatives: Bioactivities and Application in Foods

Hydrothermal carbonization for the preparation of hydrochars from glucose, cellulose, chitin, chitosan and wood chips via low-temperature and their characterization

Graphene-polymer nanocomposites for structural and functional applications

Recent progress in graphene/polymer nanocomposites

Gas barrier performance of graphene/polymer nanocomposites

Three-dimensional graphene-based polymer nanocomposites: Preparation, properties and applications

Extrusion of polymer nanocomposites with graphene and graphene derivative nanofillers: An overview of recent developments

Polymer-graphene nanocomposites: Preparation, characterization, properties, and applications

Mechanisms of mechanical reinforcement by graphene and carbon nanotubes in polymer nanocomposites

Thermoelectric effect induced electricity in stretchable graphene-polymer nanocomposites for ultrasensitive self-powered strain sensor system

A frequency-dependent theory of electrical conductivity and dielectric permittivity for graphene-polymer nanocomposites

Multifunctional graphene-based nano-additives toward high-performance polymer nanocomposites with enhanced mechanical, thermal, flame retardancy and smoke suppressive properties

Graphene and graphene derivatives toughening polymers: Toward high toughness and strength

A review on graphene polymer nanocomposites in harsh operating conditions

Recent advances in the synthesis and applications of graphene-polymer nanocomposites

Fabrication of graphene/natural rubber nanocomposites with high dynamic properties through convenient mechanical mixing

Polymer nanocomposites-A comparison between carbon nanotubes, graphene, and clay as nanofillers

Rational design of two-dimensional nanofillers for polymer nanocomposites toward multifunctional applications

Recent advances in synthesis and application of polymer nanocomposites for water and wastewater treatment

Effect of BNNR on mechanical properties of polyethylene nanocomposites. Mater

3D printing of graphene-based polymeric nanocomposites for biomedical applications

Polyaniline/graphene oxide nanocomposite as a sorbent for extraction and determination of nicotine using headspace solid-phase microextraction and gas chromatography-flame ionization detector

Electrochemically prepared three-dimensional reduced graphene oxide-polyaniline nanocomposite as a solid-phase microextraction coating for ethion determination

Polypyrrole-reduced graphene oxide nanocomposite hydrogels: A promising electrode material for the simultaneous detection of multiple heavy metal ions

Melt Rheology and Mechanical Characteristics of Poly (Lactic Acid)/Alkylated Graphene Oxide Nanocomposites

Ionic conductive polyurethane-graphene nanocomposite for performance enhancement of optical fiber Bragg grating temperature sensor

In-situ hybridization of polyaniline nanofibers on functionalized reduced graphene oxide films for high-performance supercapacitor

Simultaneously depositing polyaniline onto bacterial cellulose nanofibers and graphene nanosheets toward electrically conductive nanocomposites

Cost-effective three dimensional Ag/polymer dyes/graphene-carbon spheres hybrids for high performance nonenzymatic sensor and its application in living cell H2O2 detection

To increase electrochemical performance of electrode material by attaching activated carbon particles on reduced graphene oxide sheets for supercapacitor

Plain to point network reduced graphene oxide-activated carbon composites decorated with platinum nanoparticles for urine glucose detection

Gold nanoparticledecorated reduced-graphene oxide targeting anti hepatitis B virus core antigen

One-step hydrothermal synthesis and photocatalytic activity of SnO 2 /rGO nanocomposites: Effects of pH values

Graphene-based nano composites and their applications. A review

Biodiesel production from waste cooking oil catalyzed by in-situ decorated TiO 2 on reduced graphene oxide nanocomposite

Graphene-Based Hybrid Functional Materials

Two-dimensional MnO 2 /reduced graphene oxide nanosheet as a high-capacity and high-rate cathode for lithium-ion batteries

Fabrication and characterization of transparent conducting reduced graphene oxide/Ag nanowires/ZnO: Ga composite thin films on flexible substrates

Reduced Graphene oxide supported copper oxide nanocomposites from a renewable copper mineral precursor: A green approach for decarboxylative C (sp3)-H activation of proline amino acid to afford value-added synthons

3D NiO hollow sphere/reduced graphene oxide composite for high-performance glucose biosensor

Flower-like Fe 2 O 3 /reduced graphene oxide composite for electrochemical energy storage

Boosting the Electrocatalytic Hydrogen Evolution and Sodium-Storage Properties of Co9S8 Nanoparticles via the Encapsulation with Nitrogen-Doped Few-Layer Graphene Networks

A highly stretchable and conductive 3D porous graphene metal nanocomposite based electrochemical-physiological hybrid biosensor

N-doped graphene-based copper nanocomposite with ultralow electrical resistivity and high thermal conductivity

Sensitive determination of trace 4-nitrophenol in water based on thio-β-cyclodextrin functionalized graphene/copper nanospheres

Fabrication, mechanical properties, and biocompatibility of graphenereinforced chitosan composites

Processable conducting graphene/chitosan hydrogels for tissue engineering

Dopamine molecularly imprinted electrochemical sensor based on graphene-Chitosan composite

Study on the effect of silanization and improvement in the tensile behavior of graphene-chitosan-composite

Fabrication of novel magnetic chitosan grafted with graphene oxide to enhance adsorption properties for methyl blue

Superior strength and toughness of graphene/chitosan fibers reinforced by interfacial complexation

Bacteriostatic, and Biological Properties of Starch/Chitosan Polymer Composites Modified by Graphene Oxide, Designed as New Bionanomaterials. Polymers

Graphene oxide cross-linked chitosan nanocomposite membrane

Cryomilling application of graphene to improve material properties of graphene/chitosan nanocomposites

Well-dispersed chitosan/graphene oxide nanocomposites

Supramolecular gels from lipopeptide gelators: Template improvement and strategies for the in-situ preparation of inorganic nanomaterials and for the dispersion of carbon nanomaterials

Designing chitosan-tripolyphosphate microparticles with desired size for specific pharmaceutical or forensic applications

Recent advances in nanocomposite materials of graphene derivatives with polysaccharides

Graphene sulphonic acid/chitosan nano biocomposites with tunable mechanical and conductivity properties

Supramolecular hydrogel of chitosan in the presence of graphene oxide nanosheets as 2D cross-linkers

Ofloxacin exclusion using novel HRP immobilized chitosan cross-link with graphene-oxide nanocomposite

Novel green nano composites films fabricated by indigenously synthesized graphene oxide and chitosan

Effect of sonication time and heat treatment on the structural and physical properties of chitosan/graphene oxide nanocomposite films

Study on the effect of graphene and glycerol plasticizer on the properties of chitosan-graphene nanocomposites via in situ green chemical reduction of graphene oxide

Carbon dioxide adsorption and cycloaddition reaction of epoxides using chitosan-graphene oxide nanocomposite as a catalyst

Graphene oxide as a functional excipient in buccal films for delivery of clotrimazole: Effect of molecular interactions on drug release and antifungal activity in vitro

An electrochemical method for determination of amaranth in drinks using functionalized graphene oxide/chitosan/ionic liquid nanocomposite supported nanoporous gold

Chitosan for Sensors and Electrochemical Applications

Chitin and Chitosan Based Biopolymer Derived Electrode Materials for Supercapacitor Applications: A Critical Review

Nanocrystalline chitin thin films

Biomimetic photonic materials derived from chitin and chitosan

The effects of chitin/chitosan nanowhiskers on the thermal, mechanical and dye adsorption properties of electrospun PVA nanofibrous membranes

Advanced functional polymer nanocomposites and their use in water ultra-purification. Trends Environ

Introduction to Composite Materials: Nanocomposites and Their Potential Applications

Application of nanocellulose composites in the environmental engineering as a catalyst, flocculants, and energy storages: A review

Micro-and nanocellulose in polymer composite materials: A review

Application of bio-nanocomposite films and edible coatings for extending the shelf life of fresh fruits and vegetables

Multifunctional Bio-Nanocomposite Coatings for Perishable Fruits

An electrochemical sensor based on polyvinyl alcohol/chitosan-thermally reduced graphene composite modified glassy carbon electrode for sensitive voltammetric detection of lead

Advanced carbon nanomaterials for state-of-the-art flexible supercapacitors. Energy Storage Mater

Using 3-Isocyanatopropyltrimethoxysilane to decorate graphene oxide with nano-titanium dioxide for enhancing the anti-corrosion properties of epoxy coating

2D-SnSe 2 nanoflakes on paper with 1D-NiO gate insulator based MISFET as multifunctional NIR photo switch and flexible temperature sensor

Improved polaronic transport under a strong Mott-Hubbard interaction in Cu-substituted NiO

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano) materials for sustainable water treatment: A review

Antioxidant capacities of the selenium nanoparticles stabilized by chitosan

Green methodology for the preparation of chitosan/graphene nanomaterial through electrochemical exfoliation and its applicability in Sunset Yellow detection

Tuning ratios of KOH and NaOH on acetic acid-mediated chitosan-based porous carbons for improving their textural features and CO 2 uptakes

The development of non-enzymatic glucose biosensors based on electrochemically prepared polypyrrole-chitosan-titanium dioxide nanocomposite films

A study of diffraction-based chitosan leaky waveguide (LW) biosensors

An ion-imprinted sensor based on chitosan-graphene oxide composite polymer modified glassy carbon electrode for environmental sensing application

Biosensor based on tyrosinase immobilized on graphenedecorated gold nanoparticle/chitosan for phenolic detection in aqueous

Spin coated chitin films for biosensors and its analysis are dependent on chitin-surface interactions

Optical and structural characterization of immobilized 4-(2-pyridylazo) resorcinol in chitosan-graphene oxide composite thin film and its potential for Co 2+ sensing using surface plasmon resonance technique

Low power consumption and fast response H 2 S gas sensor based on a chitosan-CuO hybrid nanocomposite thin film

Heavy-metal ion sensor using chitosan capped ZnS quantum dots

Chitin and chitosan-Structurally related precursors of dissimilar hard carbons for Na-ion battery

Chitosan, a new and environmental benign electrode binder for use with graphite anode in lithium-ion batteries

Chitosan-assisted fabrication of ultrathin MoS2/graphene heterostructures for Li-ion battery with excellent electrochemical performance

High-conductivity 1T-MoS 2 catalysts anchored on a carbon fiber cloth for high-performance lithium-sulfur batteries

Multifunctional chitosan-RGO network binder for enhancing the cycle stability of Li-S batteries

Alkaline chitosan solution as etching phase to design Si@ SiO2@ N-Carbon anode for Lithium-ion battery

Porous flexible nitrogen-rich carbon membranes derived from chitosan as free-standing anodes for potassium-ion and sodium-ion batteries. Carbon

Chitosan-derived nitrogendoped carbon on Li2ZnTi3O8/TiO2 composite as an anode material for lithium-ion batteries

Chitosan-Assisted Fabrication of a Network C@ V2O5 Cathode for High-Performance Zn-Ion Batteries

N-doped rGO/C@ Si composites using sustainable chitosan as the carbon source for lithium-ion batteries

Novel Lithium-Chalcogenide Batteries Combining S, Se and C Characteristics Supported by Chitosan-Derived Carbon Intertwined with CNTs

Eco-friendly polyelectrolyte nanocomposite membranes based on chitosan and sulfonated chitin nanowhiskers for fuel cell applications. Iran

Chitin degradation and electricity generation by Aeromonas hydrophila in microbial fuel cells

Low-cost Fe-N-C catalyst derived from Fe (III)-chitosan hydrogel to enhance power production in microbial fuel cells

Development of Proton Exchange Membranes Based on Chitosan Blended with Poly (2-Acrylamido-2-Methylpropane Sulfonic Acid) for Fuel Cells applications

Applications of chitosan (CHI)-reduced graphene oxide (rGO)-polyaniline (PAni) conducting composite electrode for energy generation in glucose biofuel cell

Efficient Chitosan/Nitrogen-Doped Reduced Graphene Oxide Composite Membranes for Direct Alkaline Ethanol Fuel Cells

Start-up investigation of the self-assembled chitosan/montmorillonite nanocomposite over the ceramic support as a low-cost membrane for microbial fuel cell application

Chitosan cross-linked poly (aminoanthraquinone)/Prussian blue ternary nitrogen precursorderived Fe-N-C oxygen reduction catalysts for microbial fuel cells and zinc-air batteries

Eco-friendly methanesulfonic acid and sodium salt of dodecylbenzene sulfonic acid doped cross-linked chitosan based green polymer electrolyte membranes for fuel cell applications

Novel Chitosan-Mg (OH) 2 -Based Nanocomposite Membranes for Direct Alkaline Ethanol Fuel Cells

Polyelectrolyte nanocomposite membranes based on chitosan and surface modified multi-walled carbon nanotubes for use in fuel cell applications

Fabrication of composite polymer electrolyte membrane using acidic metal-organic frameworks-functionalized halloysite nanotubes modified chitosan

Chitosan-Based Materials for Supercapacitor Application-A Review

Ultrahigh-surface-area nitrogen-doped hierarchically porous carbon materials derived from chitosan and betaine hydrochloride sustainable precursors for high-performance supercapacitors

Synthesis, structural and electrochemical characterization of Zn doped iron oxide/grapheneoxide/chitosan nanocomposite for supercapacitor application

Chitosan-derived hybrid porous carbon with the novel tangerine pith-like surface as supercapacitor electrode

Facile synthesis of chitosan derived heteroatoms-doped hierarchical porous carbon for supercapacitors

Chitosan with various degrees of carboxylation as hydrogel electrolyte for pseudo solid-state supercapacitors

Electrostatically self-assembled chitosan derivatives working as efficient cathode interlayers for organic solar cells

Chitosan-derived hydrothermally carbonized materials and its applications: A review of recent literature

Boosting of power conversion efficiency of 2D ZnO nanostructures-based DSSC by the Lorentz force with chitosan polymer electrolyte

Chitosan as a paradigm for biopolymer electrolytes in solid-state dye-sensitised solar cells

Chitin and Chitosan Composites for Wearable Electronics and Energy Storage Devices

Development of a novel nanocomposite using polypyrrole grafted chitosan-decorated CDs with improved photocatalytic activity under solar light illumination

Characteristics of Dye-Sensitized Solar Cell Assembled from Modified Chitosan-Based Gel Polymer Electrolytes Incorporated with Potassium Iodide

Tripropyl Chitosan Iodide-Based Gel Polymer Electrolyte as Quasi Solid-State Dye Sensitized Solar Cells

Electrochemical performance of polymer blend electrolytes based on chitosan: Dextran: Impedance, dielectric properties, and energy storage study

A Highly Sensitive and Flexible Metal-Organic Framework Polymer-Based H 2 S Gas Sensor

Bio-based Fe 3 O 4 /chitosan nanocomposite sensor for response surface methodology and sensitive determination of gallic acid

Effect of fumed silica/chitosan/poly (vinylpyrrolidone) composite coating on the electrochemical corrosion resistance of Ti-6Al-4V alloy in artificial saliva solution

A novel Fe-Chitosan-coated carbon electrode sensor for in situ As (III) detection in mining wastewater and soil leachate

Chitosan polymer complex derived nanocomposite (AgNPs/NSC) for electrochemical non-enzymatic glucose sensor

Conductive and superhydrophobic F-rGO@ CNTs/chitosan aerogel for piezoresistive pressure sensor

Chemiresistive humidity sensor based on chitosan/zinc oxide/single-walled carbon nanotube composite film

Facile synthesis of copper ferrite nanoparticles with chitosan composite for high-performance electrochemical sensor

LSPR based optical fiber sensor with chitosan capped gold nanoparticles on BSA for trace detection of Hg (II) in water, soil and food samples

A QCM humidity sensor constructed by graphene quantum dots and chitosan composites

Carbon-based fibers for advanced electrochemical energy storage devices

Preparation and characterization of polyaniline nanocomposites with graphene oxide-zinc oxide hybrids in different morphologies

Fabrication of cellulose acetate-chitosan based flexible 3D scaffold-like porous membrane for supercapacitor applications with PVA gel electrolyte

Hierarchically Porous Carbons Derived from Metal-Organic Framework/Chitosan Composites for High-Performance Supercapacitors

Poly (ionic liquid)/carboxymethyl chitosan complex-derived nitrogen and sulfur codoped porous carbon for high-performance supercapacitors

An ultrasensitive label-free electrochemical immunosensor based on 3D porous chitosan-graphene-ionic liquid-ferrocene nanocomposite cryogel decorated with gold nanoparticles for prostate-specific antigen

Polyaniline grafted chitosan/GO-CNT/Fe 3 O 4 nanocomposite as a superior electrode material for supercapacitor application

Electrochemical and hydrogen evolution behaviour of a novel nano-cobalt/nanochitosan composite coating on a surgical 316L stainless steel alloy as an implant

Prawn shell derived chitin nanofiber membranes as advanced sustainable separators for Li/Na-ion batteries

Hierarchical chitin fibers with aligned nanofibrillar architectures: A nonwoven-mat separator for lithium metal batteries

Highly selective custom-made chitosan based membranes with reduced fuel permeability for direct methanol fuel cells

Constructing anhydrous proton exchange membranes through alternate depositing graphene oxide and chitosan on sulfonated poly (vinylidenefluoride) or sulfonated poly (vinylidene fluoride-co-hexafluoropropylene) membranes

Post synthesis foaming of graphene-oxide/chitosan aerogel for efficient microwave absorbers via regulation of multiple reflections

Conducting chitosan/hydroxylethyl cellulose/polyaniline bionanocomposites hydrogel based on graphene oxide doped with Ag-NPs

Impedance, FTIR and Transport Properties of Plasticized Proton Conducting Biopolymer Electrolyte Based on Chitosan for Electrochemical Device Application