key: cord-0697248-9mgg9q2m
authors: Zhao, Jiangtao; Feng, Ruo
title: Sensitive and rapid detection of Zika virus by loop-mediated isothermal amplification
date: 2018-11-13
journal: Virus Genes
DOI: 10.1007/s11262-018-1612-x
sha: f20529d499463013219363bae1b9af109ae672a9
doc_id: 697248
cord_uid: 9mgg9q2m

Zika virus (ZIKV) is a mosquito-borne flavivirus, which is a pathogen affecting humans in Africa, Asia, and America. It is necessary to detect ZIKV with a rapid and sensitive molecular method to guide timely treatment. In this study, a loop-mediated isothermal amplification (LAMP) assay was described, which is an attractive option as a fast, sensitive, and specific method for ZIKV detection using the NS5 protein coding region and the envelope protein (EP) coding region as target sequences. Two different techniques, a calcein/Mn(2+) complex chromogenic method and real-time turbidity monitoring, were employed. The specificity and sensitivity of the LAMP assay were determined. The assay’s detection limit was 0.5 × 10(−9) pmol/µl DNA for NS5 protein coding region and 1.12 × 10(−11) pmol/µl DNA for E coding region, respectively, which is a 100-fold increase in sensitivity compared with real-time reverse transcription-polymerase chain reaction (RT-PCR) and conventional PCR. All 12 non-ZIKA respiratory pathogens tested were negative for LAMP detection, indicating the high specificity of the primers for ZIKV. In conclusion, a visual detection LAMP assay was developed, which could be a useful tool for primary quarantine purposes and clinical screening, especially in situations where resources are poor and in point-of-care tests.

Zika virus (ZIKV) is an emerging mosquito-borne arbovirus of the Flaviviridae family [1] . Zika virus has been reported as a pathogen of sporadic human infection for nearly half a century [2] . A widespread epidemic of ZIKV infections was found in Central and South America recently [3] . On February 1, 2016, the disease has been declared as a "Public Health Emergency of International Concern" by the World Health Organization (WHO) [2] . ZIKV is spread via mosquito transmission, sexual transmission, and vertical (mother to child) and blood transfusions [1] . The diagnosis of virus infection is typically performed by virus isolation, serological examinations, or specific antibodies from animals, but these methods are time consuming and not appropriate for clinical settings [4, 5] . In some virus laboratories, molecular-based diagnostic methods are employed using reverse transcription-PCR (RT-PCR), which takes several hours to obtain the results, which requires special equipment and skillful experiences [5, 6] , and is complicated to perform in resource-limited laboratories in developing countries [7, 8] . Therefore, it is important to develop faster, more sensitive, and more accurate methods for timely diagnosis. LAMP is an emergency nucleic acid detection technique which was reported in 2000 and it performs high specificity as the amplification of DNA is conducted by two to three pairs of primer recognizing six independent regions on target gene [9] . LAMP was developed to amplify target DNA without any temperature change, which typically required denaturation, annealing, and extension. As the method could proceed at constant temperature with only a thermostat as the only equipment required, it is an ideal method for use in the field or in time-sensitive situations [9] . This technology has been widely used in clinical diagnosis; qualitative and quantitative Edited by Joachim Jakob Bugert. detection of prevalent bacteria, viruses, and parasites; and fetal gender identification, etc. [7, 10] . Thus, LAMP could be a highly beneficial and convenient application to detect Zika virus due to its high specificity and stability, and it has been reported that LAMP shined a light on Zika virus [11] [12] [13] [14] [15] [16] [17] [18] [19] .

The non-structural protein (NS5) and envelope protein (E) coding regions can be used as potential biomarkers for diagnostic purposes [5, 20] . Our study is the first to use ZIKV NS5 and E genes as the target sequences in a LAMP assay. Here, we describe a visual method based on color change of the calcein/Mn 2+ mixture and LAMP results can be interpreted by naked eyes immediately. The purpose of this study was to develop a rapid and simple test of ZIKV detection based on LAMP technology, which requires only basic equipment and interprets results instantaneously through visual inspection. [5, 20] . NS5 and E fragments were synthesized (Sangon Biotech Co., Ltd., Shanghai, China) and cloned into pBM21 vector to prepare the recombinant plasmids. RNA was extracted from viruses stocks using commercial QIAamp MinElute Virus Spin kit (Qiagen kit) according to the manufacturer's protocol. Reverse transcription was conducted according to standard procedure using M-MLV reverse transcriptase (Fermentas) according to the manufacturer's instruction. The DNA concentration was determined by measuring the optical density at 260 nm (OD260) and then dissolved in 20 µl of DEPC-treated water and stored at −80 °C until use. All infectious materials were handled in biosafety level 3 facilities.

The NS5 and E sequences of Zika virus strain Natal RGN were chosen as targets for the primers. The sequence with accession number KU527068 was retrieved and obtained from NCBI GenBank database, and was further analyzed by Primer Explorer Version 4 (http://prime rexpl orer.jp/elamp 4.0.0/index .html). Outer forward primer (F3), outer reverse primer (B3), forward inner primer (FIP), and reverse inner primer (BIP) were designed. Two additional loop primers (loop F and loop B) were designed to accelerate the amplification reaction. The FIP and BIP primers recognize both sense and antisense strands and were linked by a four-thymidine spacer (TTTT). PCR and RT-PCR were performed with the primers named PCR-F, PCR-R, RT-PCR-P, RT-PCR-F, and RT-PCR-R. All the primers were synthesized commercially (Sangon Biotech Co., Ltd., Shanghai, China) ( Tables 2, 3 ).

The LAMP reactions were carried out in a total volume of 25 µl containing 12.5 µl reaction mixture, 1 µl Bst DNA polymerase, 2 µl template by using the Loopamp DNA Amplification kit (Loopamp DNA Amplification Kit; Eiken Chemical Co., Ltd. Tochigi, Japan) for real-time turbidimeter and add another 1 µl calcein solution (Eiken Chemical Co., Ltd.) for visual detection. An amount of 40 pmol was used for FIP Influenza A H7N9 Our microorganism center 7

Human coronavirus HCoV-OC43 Our microorganism center 8

Human coronavirus HCoV-NL63 Our microorganism center 9

Human coronavirus HCoV-229E Our microorganism center 10 SARS coronavirus Our microorganism center 11

Dengue virus Our microorganism center 12

Sudan EBOV (Subtype Sudan, strain Gulu) Our microorganism center 13 ZIKV strain Natal RGN Our microorganism center and BIP; a concentration of 20 pmol was used for LB and LF; and a concentration of 5 pmol was used for F3 and B3. Finally, the appropriate amount of template genome is added to the reaction tube. The reaction mix was overlaid with the wax to prevent cross-contamination of samples by aerosol and carried out in the reaction tubes (Eiken Chemical Co. Ltd.) for 60 min at 65 °C. During the amplification process, the wax melted into a liquid without interfering with the reaction, and the wax solidified as the temperature in the tube fell to room temperature. Two different detection methods based on sample turbidity and fluorescence were used to detect the LAMP products. Spectrophotometric analysis was performed by recording optical density (650 nm) using a Loopamp realtime turbidimeter (LA-320C; Eiken Chemical Co., Ltd.), and real-time changes in turbidity were monitored every 6 s. For direct visual detection, 1 µl of calcein fluorescence detection reagent was added to 25 µl of LAMP product. As the magnesium ions form a complex with calcein, LAMP amplification produces a green fluorescence emission. For negative reactions, the color is still orange, but for positive reactions, the color changes from orange to green. It can be observed under natural light or with the naked eye under 365 nm UV light [21] .

To describe the sensitivity of LAMP detection, a one-step E rRT-PCR assay capable of detecting ZIKV NS5 and E sequences was used with 25 µl reaction mix under the following conditions: 2 µl of 5 µM of Probe, 1 µl of 5 µM of each primer, 12.5 µl of 2 × Pre Mix Ex Taq, 7.5 µl of DNA/ RNA free water, and 1 µl of the DNA specimens. The negative control consisted of water and twelve genomes of respiratory pathogens. The following thermal profile was initially carried out at 94 °C for 5 min; amplification, 35 cycles of 94 °C for 30 s, 55 °C for 30 s, and 72 °C for 45 s; final extension, 72 °C for 7 min. The data were analyzed using the SDS software from Applied Biosystems [5] . RT-PCR probe (FAM)ct(c/t)agaccagctgaa(a/g)(BHQ1) Zika(NS5)-qRT-PCR-probe RT-PCR forward aa(a/g)tacacatacca(a/g)aacaaagtggt Zika(NS5)-qRT-PCR-probe RT-PCR backward tcc(a/g)ctccc(c/t)ct(c/t)tggtcttg 

Five and three sets of primers were initially tested to detect ZIKV NS5 gene and E gene under the same reaction conditions, respectively. The "Zika 2 (NS5-Nata12)" primer set for NS5 gene and the "Zika-1" primer set for E gene began to amplify the target genes in the shortest time, respectively (Fig. 1a, b) . Thus they were chosen as the optimal primer sets for ZIKV NS5 gene and E gene detection with LAMP (Table 2) .

To optimize the reaction temperatures of the primers in the LAMP reaction, temperatures from 55 to 69 °C at 2 °C intervals were compared for optimal amplification. As shown in Fig. 2a, b , the most suitable reaction temperature range was 61-67 °C. Finally, we chose 65 °C as the optimal reaction temperature. Fig. 1 The most appropriate primers for the loop-mediated isothermal amplification assay. a A total of five sets of primers including Zika(NS5)-2, Zika(NS5)-3, Zika(NS5)-5, Zika1(NS5-Natal1), and Zika2(NS5-Natal2) were designed to detect the recombinant plasmid containing NS5 gene. b A total of three sets of primers includ-ing Zika-1, Zika-10, and Zika-15 were designed to detect the recombinant plasmid containing E gene. Turbidity was monitored and recorded every 6 s for five sets of primers used to amplify the target gene with a Loopamp Real-time Turbidimeter at 650 nm Fig. 2 The most appropriate reaction temperatures for the loop-mediated isothermal amplification assay for NS5 (a) and E (b). Reaction temperatures ranged from 55 to 69 °C with 2 °C intervals. Turbidity was monitored every 6 s with a Loopamp Real-time Turbidimeter at 650 nm

To test the LAMP specificity for NS5 gene and E gene, we tested 12 non-Zika virus in addition to the recombinant plasmids containing NS5 gene or E gene as the positive control. Figure 3 shows that the recombinant plasmids containing NS5 gene or E gene were identified positively by LAMP using turbidity monitoring (Fig. 3a, c) and visual observation (Fig. 3b, d) . Figure 3a , b shows the results of NS5 gene detection and Fig. 3c , d shows the results of E gene detection. All non-Zika virus tested negative, including the blank control, indicating that the LAMP method was specific for ZIKV.

To determine the sensitivity of the LAMP assay for ZIKV, a series of dilutions of the recombinant plasmids containing NS5 gene or E gene were prepared. The times of positivity detection ranged from 18 min for 0.5 × 10 −4 pmol/µl to 40 min for 0.5 × 10 −9 pmol/µl of the recombinant plasmid containing NS5 gene by real-time monitoring (Fig. 4a ) and the times of positivity detection ranged from 16 min for 1.12 × 10 −6 pmol/µl to 30 min for 1.12 × 10 −11 pmol/ µl of the recombinant plasmid containing E gene by realtime monitoring (Fig. 4d) . Thus, the LAMP detection limit for NS5 gene is 0.5 × 10 −9 pmol/µl of the recombinant plasmids containing NS5 gene in a 65 °C reaction lasting for 40 min, and the LAMP detection limit for E gene is 1.12 × 10 −11 pmol/µl of the recombinant plasmids containing E gene in a 65 °C reaction lasting for 30 min. For the visual inspection, all positive reactions changed to green while negative ones remained orange under natural or 365 nm UV light (Fig. 4b, e) . These data indicate that the sensitivity of the two detection methods was the same. For comparison, real-time RT-PCR and PCR were performed. The detection limit of real-time RT-PCR for NS5 gene was 0.5 × 10 −7 pmol/µl and was achieved with a higher C t value (C t = 31.68 ± 0.983) ( Table 4 ). The detection limit of PCR for NS5 gene was also 0.5 × 10 −7 pmol/µl (Fig. 4c) . The detection limit of real-time RT-PCR for E gene was 1.12 × 10 −9 pmol/µl and was achieved with a higher C t value (C t = 32.75 ± 0.085) ( Table 5 ). The detection limit of PCR for E gene was also 1.12 × 10 −9 pmol/µl (Fig. 4f) . Therefore, we conclude that LAMP assay is more sensitive to ZIKV than real-time RT-PCR.

ZIKV infection is characterized by mild disease associated with fever, headache, rash, joint pain, and conjunctivitis, and there are special reports related to Guillain-Barré syndrome (GBS) and microcephaly [22] . Therefore, rapid and sensitive laboratory diagnostic tests are highly desirable. ZIKV's diagnostic tests have traditionally been accomplished through time-consuming methods of cultivation. The present study approved the LAMP assay to directly detect Fig. 4 Comparison of the sensitivities of the LAMP reaction and conventional PCR in detecting the ZIKV NS5 gene (a-c). a Turbidity monitoring, b visual detection, c PCR detection. The recombinant plasmid containing NS5 gene was serially diluted 10-fold from 0.5 × 10 −2 to 0.5 × 10 −9 pmol/µl. 1, negative control (doubledistilled water); 2, 0.5 × 10 −2 pmol/µl; 3, 0.5 × 10 −3 pmol/µl; 4, 0.5 × 10 −4 pmol/µl; 5, 0.5 × 10 −5 pmol/µl; 6, 0.5 × 10 −6 pmol/µl; 7, 0.5 × 10 −7 pmol/µl; 8, 0.5 × 10 −8 pmol/µl; 9, 0.5 × 10 −9 pmol/µl. Com-parison of the sensitivities of the LAMP reaction and conventional PCR in detecting the ZIKV E gene (d-f). d Turbidity monitoring, e visual detection, f PCR detection. The recombinant plasmid containing E gene was serially diluted 10-fold from 1.12 × 10 −4 pmol/µl to 1.12 × 10 −11 pmol/µl. 1, negative control (double-distilled water); 2, 1.12 × 10 −4 pmol/µl; 3, 1.12 × 10 −5 pmol/µl; 4, 1.12 × 10 −6 pmol/µl; 5, 1.12 × 10 −7 pmol/µl; 6, 1.12 × 10 −8 pmol/µl; 7, 1.12 × 10 −9 pmol/µl; 8, 1.12 × 10 −10 pmol/µl; 9, 1.12 × 10 −11 pmol/µl the NS5 and E gene to aid in the diagnosis of ZIKV. And a mass of reports proved LAMP had more sensitivity and specificity for detecting pathogen [23] .

Here, we described a visual LAMP method for detecting NS5 and E gene of ZIKV. Detection of specificity was performed here using 13 viruses including 12 of other species and the recombinant plasmid containing NS5 or E gene by real-time turbidimeter and visual methods, respectively, and with the recombinant plasmid containing NS5 or E gene being positive and all the other 12 species being negative. These results not only stated that the visual LAMP method has the same specificity with using real-time turbidimeter but also had specificity for detecting ZIKV specific genes. Furthermore, we compared the ability of LAMP to detect NS5 and E sensitivity using 10-fold serial dilution of the recombinant plasmid containing NS5 or E gene with that of traditional PCR method and RT-PCR method. The detection limit of LAMP assay was 100-fold lower than the value of PCR and RT-PCR. More than that, LAMP can finish in 40 min with a simple thermostat. Therefore, LAMP posses more rapid and more simple character and these features make LAMP assay more suitable for field and/or time purpose.

There are various advantages of LAMP assay but it has a relatively high rate of false-positive results. For the reason that the amplification efficiency of the LAMP assay is extremely high and 20 µg of specific DNA can be synthesized in a 25-µl reaction mixture within 60 min [24] , it was very necessary to separate the reagent preparation and the performance of the test to avoiding contamination. In our study, a low-melting point wax was added to the reaction tube to prevent the spread of the amplification products. It seems to work well to avoiding contamination.

In conclusion, the visual LAMP assay developed here for detecting ZIKV is more sensitive than PCR and RT-PCR and the results can be observed by naked eyes immediately when amplification is completed. For sensitive and specificity, the results of this visual method were consistent with real-time turbidimeter observations. Consequently, a specific, sensitive, rapid, and cost-effective means for ZIKV detection with LAMP method was established. It is very helpful for primary health care units to use the LAMP assay to detect ZIKV.

Testing for Zika virus (ZIKV) infection in pregnancy: key concepts to deal with an emerging epidemic

Zika virus infection: past and present of another emerging vector-borne disease

The role of secretory autophagy in Zika virus transfer through the placental barrier

Rapid diagnostic method for detection of mumps virus genome by loop-mediated isothermal amplification

Quantitative real-time PCR detection of Zika virus and evaluation with field-caught mosquitoes

Detection of mumps virus genome directly from clinical samples and a simple method for genetic differentiation of the Hoshino vaccine strain from wild strains of mumps virus

Detection of streptococcus pyogenes using rapid visual molecular assay

Detection of Zika virus by SYBR green one-step real-time RT-PCR

Loop-mediated isothermal amplification of DNA

Rapid and specific detection of Asian-and African-lineage Zika viruses

LAMP assays of Zika virus and other infectious agents will inevitably see expanded use due to their simplicity, sensitivity, specificity, and economy

Rapid colorimetric detection of Zika virus from serum and urine specimens by reverse transcription loop-mediated isothermal amplification (RT-LAMP)

Rapid diagnosis of zika virus through saliva and urine by loop-mediated isothermal amplification (LAMP)

Rapid and reliable diagnostic method to detect Zika virus by real-time fluorescence reverse transcription loop-mediated isothermal amplification

Simpler, faster, and sensitive zika virus assay using smartphone detection of loop-mediated isothermal amplification on paper microfluidic chips

Development and evaluation of a rapid molecular diagnostic test for Zika virus infection by reverse transcription loopmediated isothermal amplification

Rapid detection of zika virus in urine samples and infected mosquitos by reverse transcriptionloop-mediated isothermal amplification

LAMP assay for specific detection of Asian and African lineage zika virus: will it meet the expectations

One-step RT-PCR for detection of zika virus

Loop-mediated isothermal amplification (LAMP) of gene sequences and simple visual detection of products

Zika virus: the latest newcomer

The enhanced pneumococcal LAMP assay: a clinical tool for the diagnosis of meningitis due to Streptococcus pneumoniae

Detection of loop-mediated isothermal amplification reaction by turbidity derived from magnesium pyrophosphate formation

Acknowledgements This work received support from National Natural Science Foundation of China Grant (81401995).Author contributions JZ and RF performed the research, analyzed the data, and wrote the paper.

Conflict of interest All authors declare that they have no conflicts of interest.