key: cord-0689463-v4dc4yys authors: Umeda, Akira; Ishizaka, Masahiro; Ikeda, Akane; Miyagawa, Kazuya; Mochida, Atsumi; Takeda, Hiroshi; Takeda, Kotaro; Fukushi, Isato; Okada, Yasumasa; Gozal, David title: Recent Insights into the Measurement of Carbon Dioxide Concentrations for Clinical Practice in Respiratory Medicine date: 2021-08-21 journal: Sensors (Basel) DOI: 10.3390/s21165636 sha: 68caa9e2aca13a72c59642912d1fd363880b14f4 doc_id: 689463 cord_uid: v4dc4yys In the field of respiratory clinical practice, the importance of measuring carbon dioxide (CO(2)) concentrations cannot be overemphasized. Within the body, assessment of the arterial partial pressure of CO(2) (PaCO(2)) has been the gold standard for many decades. Non-invasive assessments are usually predicated on the measurement of CO(2) concentrations in the air, usually using an infrared analyzer, and these data are clearly important regarding climate changes as well as regulations of air quality in buildings to ascertain adequate ventilation. Measurements of CO(2) production with oxygen consumption yield important indices such as the respiratory quotient and estimates of energy expenditure, which may be used for further investigation in the various fields of metabolism, obesity, sleep disorders, and lifestyle-related issues. Measures of PaCO(2) are nowadays performed using the Severinghaus electrode in arterial blood or in arterialized capillary blood, while the same electrode system has been modified to enable relatively accurate non-invasive monitoring of the transcutaneous partial pressure of CO(2) (PtcCO(2)). PtcCO(2) monitoring during sleep can be helpful for evaluating sleep apnea syndrome, particularly in children. End-tidal PCO(2) is inferior to PtcCO(2) as far as accuracy, but it provides breath-by-breath estimates of respiratory gas exchange, while PtcCO(2) reflects temporal trends in alveolar ventilation. The frequency of monitoring end-tidal PCO(2) has markedly increased in light of its multiple applications (e.g., verify endotracheal intubation, anesthesia or mechanical ventilation, exercise testing, respiratory patterning during sleep, etc.). Atmospheric carbon dioxide (CO 2 ) concentration is increasing worldwide by the increasing consumption of carbon-based combustibles along with progressive deforestation [1, 2] . Increases in atmospheric CO 2 concentrations are thought to cause elevation of atmospheric temperature as a result of the greenhouse effect. High concentrations of atmospheric CO 2 can facilitate the onset of human health problems, such as increased fatigue, headache, and tinnitus. Inhalation of 0.1% CO 2 for a short time has been reported to cause marked changes in respiratory, circulatory, and cerebral electrical activity [3, 4] . More recently, continuous measurements of atmospheric CO 2 concentrations have been viewed as being helpful for the evaluation of ventilation conditions in rooms or buildings, and it has been utilized as guidance to avoid the transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) [5] . SARS-CoV-2 can cause the coronavirus disease 2019 (COVID- 19) , which has emerged as a serious problem in respiratory clinical practice [6] [7] [8] . On the other hand, arterial blood gas analysis (ABGA) is very commonly implemented in routine clinical practice of respiratory medicine [9] [10] [11] . Arterial partial pressure of CO 2 (PaCO 2 ) is commonly evaluated in any type of respiratory disease. PaCO 2 is useful for the diagnosis of hypo-or hyperventilation and to evaluate potential respiratory drive depression and CO 2 narcosis in patients with chronic obstructive pulmonary disease (COPD) or other conditions. The evaluation of acid-base imbalance in the context of respiratory acidosis can be performed using pH and PaCO 2 data. Non-invasive alternative methods such as end-tidal CO 2 partial pressure of exhaled gas (PetCO 2 ) and transcutaneous partial pressure of CO 2 (PtcCO 2 ) have been developed, and their accuracy and usefulness have been evaluated by Bland-Altman analysis [12] . Another use of CO 2 concentration measurements in exhaled air involves assessment of CO 2 production [9] . The respiratory quotient (RQ) can be calculated using the data of CO 2 production ( . VCO 2 ) and oxygen (O 2 ) consumption ( . VO 2 ). Then, the difference of partial pressure of oxygen (PO 2 ) between mean alveolar gas and arterial blood can be calculated [10] . This approach has been used for the evaluation of gas exchange impairment in various lung diseases [9, 10, 13] . Energy expenditure can be also evaluated, and this is particularly of interest in obese patients with obstructive sleep apnea syndrome (OSAS) using CO 2 production data and oxygen consumption data [14] . Thus, depending on the objectives driving the measurement of CO 2 concentrations, the most suitable method should be adopted. In order to better understand the considerations involved in such choices, we will discuss the principles, sensitivity, and limitations of the various methods available for measuring CO 2 concentrations. The World Data Centre for Greenhouse Gases reported that atmospheric CO 2 concentrations are increasing worldwide, and they are currently around 410 ppm ( Figure 1 ) [2] . The method to measure this concentration is by non-dispersive infrared technology ( Figure 2 ) [15] [16] [17] [18] . This increase in CO 2 level has been mainly attributed to increasing the consumption of carbon-based energy sources (e.g., coal, oil) with significant concomitant deforestation due to unregulated expansion of industrial agriculture initiatives [1, 2] . When atmospheric CO 2 concentration rises, human PaCO 2 will rise, but its toxicity has been reported to be little, if any, at 5% (50,000 ppm) or lower [19] . Atmospheric CO 2 concentrations of more than 50,000 ppm may cause hypercapnia, respiratory acidosis, and increased respiratory rate. Severe acidosis will ultimately result in depression of the respiration and the circulation. Atmospheric CO 2 concentrations of more than 10% (100,000 ppm) may cause convulsions, coma, and death [19] . Duarte et al. showed the standard CO 2 levels in air in indoors environments (i.e., >15,000 ppm: accident by CO 2 intoxication; 10,000 ppm: submarines; 5000 ppm: crowded indoors; 600 ppm: well-ventilated indoors) [20] . According to the documents of the World Health Organization, the amplitude (depth) of respiratory movements was reduced by the inhalation of 0.1% (1000 ppm) CO 2 , while peripheral blood flow was increased, and the amplitude of brain electrical waves was increased [3, 4] . In these documents from the 1960s, it was suggested that the indoors concentrations of CO 2 should not exceed 1000 ppm. A man engaged in light work exhales about 22.6 L of CO 2 per hour [4] , and since the recent normal concentration of CO 2 in the atmosphere is 0.04% (0.4 L/m 3 ), the volume of required fresh air per person to ensure CO 2 concentrations not exceeding 0.1% (1.0 L/m 3 ) would be 22.6/(1.0 − 0.4) = 38 m 3 per hour. Thus, strict monitoring of air circulation and CO 2 concentrations are essential in indoor locations where the density of humans is high (e.g., cinemas, theaters, office buildings, hospitals, etc.). When atmospheric CO2 concentration rises, human PaCO2 will rise, but its toxicity has been reported to be little, if any, at 5% (50,000 ppm) or lower [19] . Atmospheric CO2 Measuring system of CO2 by using the non-dispersive infrared analyzer. The light chopper delivers the data of infrared intensity as a continuous alternating current signal to the detector through the optic filter (adapted from [18] with permission). When atmospheric CO2 concentration rises, human PaCO2 will rise, but its toxicity has been reported to be little, if any, at 5% (50,000 ppm) or lower [19] . Atmospheric CO2 concentrations of more than 50,000 ppm may cause hypercapnia, respiratory acidosis, and increased respiratory rate. Severe acidosis will ultimately result in depression of the respiration and the circulation. Atmospheric CO2 concentrations of more than 10% (100,000 Measuring system of CO 2 by using the non-dispersive infrared analyzer. The light chopper delivers the data of infrared intensity as a continuous alternating current signal to the detector through the optic filter (Adapted with permission from Ref. [18] . Copyright 2021 HORIBA). Measuring atmospheric CO 2 concentrations has been helpful for evaluation of the ventilation conditions in rooms of buildings aiming to decrease the transmission risk of SARS-CoV-2, which can cause COVID-19 ( Figure 3 ) [5, 21, 22] . Smaller droplets (<10 µm) with SARS-CoV-2 content expired from COVID-19 patients can travel tens of meters in the air while indoors and cause airborne transmission [23, 24] . The Japanese government recommended the use of atmospheric CO 2 sensors in rooms such as restaurants in order to prevent COVID-19 especially in cold weather [25] . Guidelines for indoor CO 2 concentrations to reduce indoors COVID-19 infection risk should be more helpful if they account for environment and activity types [5] . Marr et al. suggested that indoor CO 2 concentrations should not exceed 700 ppm in classrooms and 550 ppm in hallways in order to limit the COVID-19 transmission in schools [26] . Teachers in many countries may be required to keep the indoor CO 2 concentrations low and decrease the students' risk of inhaling SARS-CoV-2 floating in the air in classrooms. By measuring indoor CO 2 concentrations, teachers can evaluate how widely the windows should be opened (e.g., fully or partially open) in classrooms considering the meteorological conditions (especially wind) and estimate the overall rate of ventilation in the classroom [26] . concentrations of CO2 should not exceed 1000 ppm. A man engaged in light work exhales about 22.6 L of CO2 per hour [4] , and since the recent normal concentration of CO2 in the atmosphere is 0.04% (0.4 L/m 3 ), the volume of required fresh air per person to ensure CO2 concentrations not exceeding 0.1% (1.0 L/m 3 ) would be 22.6/(1.0 − 0.4) = 38 m 3 per hour. Thus, strict monitoring of air circulation and CO2 concentrations are essential in indoor locations where the density of humans is high (e.g., cinemas, theaters, office buildings, hospitals, etc.). Measuring atmospheric CO2 concentrations has been helpful for evaluation of the ventilation conditions in rooms of buildings aiming to decrease the transmission risk of SARS-CoV-2, which can cause COVID-19 ( Figure 3 ) [5, 21, 22] . Smaller droplets (<10 μm) with SARS-CoV-2 content expired from COVID-19 patients can travel tens of meters in the air while indoors and cause airborne transmission [23, 24] . The Japanese government recommended the use of atmospheric CO2 sensors in rooms such as restaurants in order to prevent COVID-19 especially in cold weather [25] . Guidelines for indoor CO2 concentrations to reduce indoors COVID-19 infection risk should be more helpful if they account for environment and activity types [5] . Marr et al. suggested that indoor CO2 concentrations should not exceed 700 ppm in classrooms and 550 ppm in hallways in order to limit the COVID-19 transmission in schools [26] . Teachers in many countries may be required to keep the indoor CO2 concentrations low and decrease the students' risk of inhaling SARS-CoV-2 floating in the air in classrooms. By measuring indoor CO2 concentrations, teachers can evaluate how widely the windows should be opened (e.g., fully or partially open) in classrooms considering the meteorological conditions (especially wind) and estimate the overall rate of ventilation in the classroom [26] . In addition, there was a fatal accident involving CO 2 fire extinguishing equipment in Japan in April 2021 [27] . Four people died and two people were injured due to the high concentrations of CO 2 because the equipment in the basement parking garage was mistakenly activated. The mandate of monitoring atmospheric CO 2 concentration is increasing and is likely to become mandatory in buildings and similar public structures. Currently, the measurement of CO 2 concentrations using infrared is the fastest method to obtain data from atmospheric samples at low cost; as such, this method is suitable in most of the situations. Apart from atmospheric CO 2 concentration measures, it is frequently necessary to measure the partial pressure of CO 2 (PCO 2 ) in blood in respiratory clinical practice. The analysis of blood gas values has been performed by means of electrochemical devices [28] . The traditionally used electrode for measuring PCO 2 is termed the Severinghaus PCO 2 electrode, per the last name of the inventor of this electrode, Dr. John Severinghaus ( Figure 4 ) [28, 29] . This PCO 2 electrode contains the CO 2 -permeable membrane and the principle of pH meter with a pH-sensitive glass membrane. PaCO 2 is usually measured for the evaluation of any type of lung disease [9, 10] . PaCO 2 is useful for the diagnosis of hyperventilation, hypoventilation, CO 2 retention, and CO 2 narcosis in patients with COPD and many other pulmonary conditions [10, 30, 31] . Apart from atmospheric CO2 concentration measures, it is frequently necessary to measure the partial pressure of CO2 (PCO2) in blood in respiratory clinical practice. The analysis of blood gas values has been performed by means of electrochemical devices [28] . The traditionally used electrode for measuring PCO2 is termed the Severinghaus PCO2 electrode, per the last name of the inventor of this electrode, Dr. John Severinghaus (Figures 4) [28, 29] . This PCO2 electrode contains the CO2-permeable membrane and the principle of pH meter with a pH-sensitive glass membrane. PaCO2 is usually measured for the evaluation of any type of lung disease [9, 10] . PaCO2 is useful for the diagnosis of hyperventilation, hypoventilation, CO2 retention, and CO2 narcosis in patients with COPD and many other pulmonary conditions [10, 30, 31] . The evaluation of acid-base imbalance (i.e., respiratory acidosis, respiratory alkalosis, metabolic acidosis, and metabolic alkalosis), with the consideration of compensation, can be performed using simultaneous arterial pH and PaCO2 measurements [32, 33] . The majority of CO2 is transported in the body as bicarbonate ion (HCO3 − ) [34] . HCO3 − plays a The evaluation of acid-base imbalance (i.e., respiratory acidosis, respiratory alkalosis, metabolic acidosis, and metabolic alkalosis), with the consideration of compensation, can be performed using simultaneous arterial pH and PaCO 2 measurements [32, 33] . The majority of CO 2 is transported in the body as bicarbonate ion (HCO 3 − ) [34] . HCO 3 − plays a central role in maintaining the pH level in blood [32] [33] [34] [35] . These data are useful for the calculation of anion gap (AG) [32, 34, 36] . Using the plasma sodium concentration ([Na + ]) and plasma chloride concentration ([Cl − ]), AG is calculated by the following equation. The normal range for AG is 6-12 mmol/L [32] . AG is utilized for the differential diagnosis of metabolic acidosis. High-AG metabolic acidosis due to increased fixed acid includes ketoacidosis, lactic acidosis, renal failure, toxin by salicylates, etc. [32, 34, 36] . Normal-AG metabolic acidosis includes renal tubular acidosis, HCO 3 − loss from the gastrointestinal tract, etc. [32, 34, 36] . The usual clinical practice for ABGA in conscious patients involves a single arterial puncture; however, the procedure may cause pain and cause hyperventilation [11] . PaCO 2 via the arterial puncture performed after a resting period of 20-30 min has been understood as the gold standard, because arterial blood samples must be drawn when the patient is in a steady state [11, 37] . Therefore, newly developed surrogates should be compared with this gold standard PaCO 2 data. PaCO 2 is also useful for the evaluation of the ventilatory support being provided to patients with respiratory insufficiency [38] . However, an arterial puncture is necessary for measuring PaCO 2 , and it is sometimes difficult and painful, e.g., for pediatric patients. Therefore, less invasive or non-invasive surrogate measurements have been sought, and they include venous or capillary partial pressure of CO 2 , PetCO 2 , and PtcCO 2 . The pulse oximeter allows the measurement of the levels of systemic O 2 by determining the degree of percutaneous O 2 saturation (SpO 2 ) [39, 40] . Therefore, peripheral VBGA with simultaneous evaluation of SpO 2 offers an alternative to arterial blood gas analysis [41] [42] [43] . This approach has become standard practice, particularly among pediatric patients and in the emergency department, owing to its advantages (i.e., easiness and less invasive nature) over arterial blood gas analysis [44] [45] [46] . Capillary blood gas analysis can also be performed. This is particularly useful in children and involves warming the extremity to arterialize the subcutaneous vascular bed and extracting a minute amount of blood using a lancet. The gas content of this sample should be similar to the values obtained for actual arterial blood samples [47] [48] [49] . It has been demonstrated that intentional hyperventilation increases venous-arterial PCO 2 differences and pH differences [50] . Moreover, in patients with respiratory alkalosis who did not receive treatment, the condition may be underestimated by the "SpO 2 plus VBGA" method [50] . Furthermore, hyperventilation increases differences in the concentration of venous-arterial bicarbonate [51] . Therefore, these changes may be attributed to a reduction in peripheral blood perfusion induced by hyperventilation-associated systemic vasoconstriction [50, 51] . Traditionally, the concentration of CO 2 in an exhaled gas is calculated by determining the levels of chemically absorbed CO 2 and other gases [52] [53] [54] . The absorbed CO 2 is subsequently compared with the total volume of the gas, thereby revealing the levels of CO 2 present. The concentration of CO 2 in an exhaled gas can also be measured by gas chromatography and/or mass spectrometry, but these systems are voluminous, sturdy, and expensive [55] [56] [57] . The technological advancement of exhaled CO 2 monitoring has enabled the reduction of system size and the adequate monitoring of ventilation using the infrared analyzer. PetCO 2 is the highest and closest estimate of PaCO 2 in the time course of continuous sampling of expiratory PCO 2 data [54, 58] . Typically, PaCO 2 and PetCO 2 differ by 2-5 mmHg. However, the presence of lung disease, such as acute respiratory distress syndrome, COPD, and asthma, ventilation/perfusion ( Q regions) in the lungs can cause the PaCO 2 -PetCO 2 difference to increase, in which case the non-invasive measurements may be potentially misleading. Patients with gas exchange impairments may be unable to efficiently exhale CO 2 . Therefore, PetCO 2 is not a good surrogate of PaCO 2 for patients with pulmonary diseases. Furthermore, PetCO 2 cannot replace PaCO 2 [58, 59] . Nevertheless, PetCO 2 has been reported to be a useful indicator of pulmonary perfusion and cardiac output during cardiopulmonary resuscitation [54, [58] [59] [60] , and its use was recommended by numerous guidelines (American Heart association [61] , European Resuscitation Council [62] , and American College of Emergency Physicians [63] ). Particularly, the use of waveform capnography was recommended during cardiopulmonary resuscitation [59, 61, 62] . The return of spontaneous circulation is indicated by a sudden continuous rise in PetCO 2 (≥40 mmHg) [61] . Patients with an average PetCO 2 of 15 mmHg are more likely to be successfully resuscitated than those with a value of 7 mmHg [64] . In patients with a low or decreasing PetCO 2 , reassessment of cardiopulmonary resuscitation is recommended [61] . In adults and children, capnometry or capnography can be utilized to continuously monitor alterations in exhaled CO 2 from the onset of intubation to extubation [54, 58, 65, 66] . Both PetCO 2 and (PaCO 2 -PetCO 2 ) are useful for monitoring . V/ . Q mismatch especially (physiologic deadspace)/(tidal volume) evaluation, and useful to assess pulmonary embolism [58, 59] . PetCO 2 monitoring is a faster indicator than pulse oximetry or ECG tracing in order to find patient mishaps such as a ventilator becoming disconnected or other catastrophic events [58] . Monitoring with capnography is recommended not only in intubated patients but also in non-intubated patients undergoing non-invasive positive pressure ventilation (NPPV) [67] . Figure 5 shows the new CO 2 sensor, TG-980P (Nihon Kohden, Tokyo, Japan) and a mask, cap-ONE (Nihon Kohden, Tokyo, Japan) in the NPPV system with the recently rolled out ventilator, NKV-330 (Nihon Kohden, Tokyo, Japan). In cap-ONE, the inner cup is included, and exhaled air will efficiently reach TG-980P. Monitoring with capnography is possible at a remote place. The electromechanical response of the new devices for NPPV (NKV-330 with cap-ONE and TG-980P), as shown by breathing on the sensor measuring atmospheric PCO 2 , elicited an increase in PCO 2 within 3 s even at remote places such as a nurse station in a hospital ward. There are two methods to sample and detect CO2 in clinical situations: mainstream and sidestream [57, 68] . Mainstream CO2 is measured using a sensor inserted in an airway There are two methods to sample and detect CO 2 in clinical situations: mainstream and sidestream [57, 68] . Mainstream CO 2 is measured using a sensor inserted in an airway adapter, and the sample is directly taken from the airway, providing accurate data. Sidestream CO 2 is measured by pulling the patient's exhalation air through a small tube into a CO 2 detector that is placed at the end of the small tube. Although mainstream CO 2 measurement requires a relatively large amount (150 mL/min) of sample gas, only a small amount (50 mL/min) of gas is sufficient for sidestream [68] . Currently, TG-980P is the smallest and the lightest mainstream PetCO 2 sensor, where special anti-fog film is used on the window of specimens, and therefore, the heater to avoid fog is unnecessary ( Figure 6 ). Evaluation of dissolved gases diffusing into the surface of the skin can be used to determine the partial pressure of gases in blood [69] [70] [71] [72] [73] . Heating of the skin locally, occasionally accompanied by measurement of transcutaneous PO2, is necessary for determining the PtcCO2. This dilation of vessels increases the flow of arterial blood to the skin capillary bed below the detector, thereby accelerating the diffusion of gas [69, 70, 74, 75] (Figure 7) . According to Severinghaus et al., the PtcCO2 electrode contains a relatively large solid silver reference electrode inside the glass pH sensor, which enhances the transfer of heat from the heater to the skin via the glass pH electrode [69, 70] . The presence of an ultrathin film of buffer electrolyte between the silver and glass appeared to be important. This internal electrolyte contains reference solution (e.g., phosphate buffer) (light green, Figures 4 and 7) . The external electrolyte contains bicarbonate solution (light blue, Figures 4 and 7 ). The precise blueprints of recent PtcCO2 sensors are different according to manufacturing companies. This approach is commonly used to evaluate the pulmonary gas exchange function in pediatric patients as well as in adults with acute/chronic respiratory failure [76] [77] [78] . Moreover, this methodology can be employed to monitor patients receiving mechanical ventilation and managing limb ischemia [79] [80] [81] . Evaluation of dissolved gases diffusing into the surface of the skin can be used to determine the partial pressure of gases in blood [69] [70] [71] [72] [73] . Heating of the skin locally, occasionally accompanied by measurement of transcutaneous PO 2 , is necessary for determining the PtcCO 2 . This dilation of vessels increases the flow of arterial blood to the skin capillary bed below the detector, thereby accelerating the diffusion of gas [69, 70, 74, 75] (Figure 7 ). According to Severinghaus et al., the PtcCO 2 electrode contains a relatively large solid silver reference electrode inside the glass pH sensor, which enhances the transfer of heat from the heater to the skin via the glass pH electrode [69, 70] . The presence of an ultra-thin film of buffer electrolyte between the silver and glass appeared to be important. This internal electrolyte contains reference solution (e.g., phosphate buffer) (light green, Figures 4 and 7) . The external electrolyte contains bicarbonate solution (light blue, Figures 4 and 7) . The precise blueprints of recent PtcCO 2 sensors are different according to manufacturing companies. This approach is commonly used to evaluate the pulmonary gas exchange function in pediatric patients as well as in adults with acute/chronic respiratory failure [76] [77] [78] . Moreover, this methodology can be employed to monitor patients receiving mechanical ventilation and managing limb ischemia [79] [80] [81] . ). An ultra-thin film of buffer electrolyte (light green) is placed between the silver and glass. This internal electrolyte stabilizes the pH inside the glass electrode. The external electrolyte (light blue) contains sodium bicarbonate. According to the manufacturing companies, the precise blueprints of recent products differ. The accuracy of an alternative new method has been evaluated by Bland-Altman analysis for use in respiratory clinical practice (Table 1) [12, 45, 50, [82] [83] [84] [85] [86] [87] [88] [89] . [83] [84] [85] [86] [87] [88] [89] PaCO2, arterial partial pressure of CO2; PetCO2, end-tidal CO2 partial pressure of exhaled gas; PtcCO2, transcutaneous partial pressure of CO2; PvCO2, venous partial pressure of CO2; SD, standard deviation. The width of ± 1.96 SD means the 95% limits of agreement. [73] . Copyright 1983 Japanese Society for Medical and Biological Engineering). An ultra-thin film of buffer electrolyte (light green) is placed between the silver and glass. This internal electrolyte stabilizes the pH inside the glass electrode. The external electrolyte (light blue) contains sodium bicarbonate. According to the manufacturing companies, the precise blueprints of recent products differ. The accuracy of an alternative new method has been evaluated by Bland-Altman analysis for use in respiratory clinical practice (Table 1) [12, 45, 50, [82] [83] [84] [85] [86] [87] [88] [89] . [83] [84] [85] [86] [87] [88] [89] PaCO 2 , arterial partial pressure of CO 2 ; PetCO 2 , end-tidal CO 2 partial pressure of exhaled gas; PtcCO 2 , transcutaneous partial pressure of CO 2 ; PvCO 2 , venous partial pressure of CO 2 ; SD, standard deviation. The width of ± 1.96 SD means the 95% limits of agreement. Currently, the most accurate non-invasive alternative surrogate of PaCO 2 is PtcCO 2 ( Table 1) . We performed various subgroup analyses on the PtcCO 2 bias (PtcCO 2 -PaCO 2 ) in order to use PtcCO 2 efficiently in the future [89] . Subgroup analyses (sex, age, PaCO 2 level, and PaO 2 level) were performed using the data at 30 min after the placement of detectors (n = 272). The results of the analysis did not show significant differences in the PtcCO 2 bias (males/females: 168/104 [89] ). Comparison of the PtcCO 2 bias between four age groups: 20-39 years (n = 11); 40-59 years (n = 12); 60-79 years (n = 138); and ≥80 years (n = 111) (Figure 8a ). The PtcCO 2 bias was significantly lower in young adults (20-39 years) versus those aged 40-59 years and ≥80 years (p < 0.05, respectively). PtcCO 2 and PtcO 2 are frequently utilized in newborns. The increases in PtcCO 2 bias induced by aging may be due to the thickness of the skin with increasingly reduced permeability to gas exchange. Comparison of the PtcCO 2 bias between the severe hypocapnia group (PaCO 2 < 31 mmHg; n = 7), mild hypocapnia group (31 mmHg ≤ PaCO 2 < 35 mmHg; n = 24), and normal range group (35 mmHg ≤ PaCO 2 ≤ 45 mmHg; n = 202) is shown in Figure 8b . The PtcCO 2 bias was significantly higher in the severe hypocapnia group versus the normal range group (p < 0.01), and this was an intensity-dependent effect. Comparison of bias between the normal range group (35 mmHg ≤ PaCO 2 ≤ 45 mmHg; n = 202), mild hypercapnia group (45 mmHg < PaCO 2 ≤ 50 mmHg; n = 26), and severe hypercapnia group (50 mmHg < PaCO 2 ; n = 13) is shown in Figure 8c . The PtcCO 2 bias was significantly lower in the mild hypercapnia group versus the normal PaCO 2 group (p < 0.01). The hypocapnic systemic vasoconstriction is thought to be the mechanism of increases in the PtcCO 2 bias [50] . CO 2 concentration in blood is very important for peripheral blood perfusion. On the other hand, severe hypercapnic subjects (>50 mmHg) frequently have comorbid conditions such as circulatory failure, heart failure, edema, infection, etc. Comparison of the PtcCO 2 bias between the hypoxemia group (PaO 2 < 80 mmHg; n = 158), normal range group (80 mmHg ≤ PaO 2 ≤ 100 mmHg; n = 102), and hyperoxemia group (100 mmHg < PaO 2 , n = 12) is shown in Figure 8d . The PtcCO 2 bias was significantly lower in the hypoxemia group versus the normal PaO 2 group (p < 0.05), and this was thought to be a PaO 2 level-dependent effect. Previous studies have investigated hypoxemic systemic vasodilation [90] . The concentration of O 2 in blood appears to be associated with peripheral perfusion and PtcCO 2 bias. Comparison of bias between the severe, mild hypocapnia group, and normal range group. The bias was significantly higher in the severe hypocapnia group than the normal range group, and this was an intensity-dependent effect. (c) Comparison of bias between the normal range group and mild, severe hypercapnia group. The bias was significantly lower in the mild hypercapnia group versus the normal range group. (d) Comparison of bias between the hypoxemia group, normal range group, and hyperoxemia group. The bias was significantly lower in the hypoxemia group versus the normal range group, and this was a PaO2 level-dependent effect. Bars: SEM, *: p < 0.05, **: p < 0.01 [89] . PaCO2, arterial partial pressure of CO2; PaO2, arterial partial pressure of O2; PCO2, partial pressure of CO2; PtcCO2, transcutaneous partial pressure of CO2; SEM, standard error of the mean. There were not significant differences in the PtcCO2 bias among various respiratory diseases in the data of [89] (Figure 9 ). The breakdown of respiratory diseases was as follows: asthma-COPD overlap (n = 39), COPD due to emphysema (n = 25), interstitial lung disease (n = 41), pneumonia (n = 74), asthma (n = 27), lung cancer (n = 10), acute bronchitis (n = 15), bronchiectasis (n = 7), sleep apnea syndrome (n = 6), pleural diseases (n = 5), and others (n = 15). Comparison of bias between the severe, mild hypocapnia group, and normal range group. The bias was significantly higher in the severe hypocapnia group than the normal range group, and this was an intensity-dependent effect. (c) Comparison of bias between the normal range group and mild, severe hypercapnia group. The bias was significantly lower in the mild hypercapnia group versus the normal range group. (d) Comparison of bias between the hypoxemia group, normal range group, and hyperoxemia group. The bias was significantly lower in the hypoxemia group versus the normal range group, and this was a PaO 2 level-dependent effect. Bars: SEM, *: p < 0.05, **: p < 0.01 [89] . PaCO 2 , arterial partial pressure of CO 2 ; PaO 2 , arterial partial pressure of O 2 ; PCO 2 , partial pressure of CO 2 ; PtcCO 2 , transcutaneous partial pressure of CO 2 ; SEM, standard error of the mean. There were not significant differences in the PtcCO 2 bias among various respiratory diseases in the data of [89] (Figure 9 ). The breakdown of respiratory diseases was as follows: asthma-COPD overlap (n = 39), COPD due to emphysema (n = 25), interstitial lung disease (n = 41), pneumonia (n = 74), asthma (n = 27), lung cancer (n = 10), acute bronchitis (n = 15), bronchiectasis (n = 7), sleep apnea syndrome (n = 6), pleural diseases (n = 5), and others (n = 15). The use of this non-invasive PtcCO2 monitor leads to an accurate assessment of CO2 retention. All hypercapnia patients with PaCO2 > 50 mmHg (n = 13→20) showed PtcCO2 ≥ 50 mmHg until 12 min [89] (additional data). Utilization of thinner films for CO2-permeable and/or pH-sensitive membranes (Figure 7 ) may accelerate the speed to equilibration in order to reach the accurate data. The American Association for Respiratory Care has recommended an acceptable clinical range of agreement between PtcCO2 and PaCO2 (±1.96 standard deviation: ±7.5 mmHg or narrower) [80] . This range of agreement, determined through TCM4 with a tcSensor 84 (Radiometer Medical AsP, Copenhagen, Denmark), was reduced over time: ±13.6 mmHg at 4 min, ±7.5mmHg at 12-13 min, and ±6.3 mmHg at 30 min [89] . Although PtcCO2 is currently the best non-invasive surrogate of PaCO2, there were still some cases with large bias over 10 mmHg. PaCO2 cannot be replaced with PtcCO2 completely even after considering the average bias of 4-5 mmHg (Table 1 ) [89] . Other limitations include the occurrence of technical drift; therefore, the baseline calibration is necessary [91, 92] . In addition, rapid results are not available, and the results are not independent of dermal perfusion, edema, or increased skin thickness [91, 93] . Figure 9 . Subgroup analyses on PCO 2 bias (PtcCO 2 -PaCO 2 ) of patients with various respirtory diseases (n = 272). Bars: SEM. There were no significant differences in PCO 2 bias (ANOVA with Tukey's post hoc test). ACO, asthma-chronic obstructive pulmonary disease overlap; ANOVA, analysis of variance; COPD, chronic obstructive pulmonary disease; E, emphysema; ILD, interstitial lung disease; N.S., not significant; PaCO 2 , arterial partial pressure of CO 2 ; PCO 2 , partial pressure of CO 2 ; PtcCO 2 , transcutaneous partial pressure of CO 2 ; SAS, sleep apnea syndrome ( [89] , additional data). The use of this non-invasive PtcCO 2 monitor leads to an accurate assessment of CO 2 retention. All hypercapnia patients with PaCO 2 > 50 mmHg (n = 13→20) showed PtcCO 2 ≥ 50 mmHg until 12 min [89] (additional data). Utilization of thinner films for CO 2 -permeable and/or pH-sensitive membranes (Figure 7 ) may accelerate the speed to equilibration in order to reach the accurate data. The American Association for Respiratory Care has recommended an acceptable clinical range of agreement between PtcCO 2 and PaCO 2 (±1.96 standard deviation: ±7.5 mmHg or narrower) [80] . This range of agreement, determined through TCM4 with a tcSensor 84 (Radiometer Medical AsP, Copenhagen, Denmark), was reduced over time: ±13.6 mmHg at 4 min, ±7.5mmHg at 12-13 min, and ±6.3 mmHg at 30 min [89] . Although PtcCO 2 is currently the best non-invasive surrogate of PaCO 2 , there were still some cases with large bias over 10 mmHg. PaCO 2 cannot be replaced with PtcCO 2 completely even after considering the average bias of 4-5 mmHg (Table 1 ) [89] . Other limitations include the occurrence of technical drift; therefore, the baseline calibration is necessary [91, 92] . In addition, rapid results are not available, and the results are not independent of dermal perfusion, edema, or increased skin thickness [91, 93] . PtcCO 2 monitoring during sleep study has been reported to be useful for evaluating the necessity of ventilatory support especially in patients with neuromuscular disorders [94, 95] . PtcCO 2 monitoring with polysomnography may become the standard method of sleep study in the future [94] . PtcCO 2 monitoring during rehabilitation may be the promising method, too [96] [97] [98] . However, the actual PaCO 2 will not be disregarded, because the PCO 2 bias is sometimes large, and PtcCO 2 cannot replace PaCO 2 completely [89] . Therefore, future use of PtcCO 2 monitoring will be limited and may be just focusing on relative evolution. Measuring CO 2 in exhaled gas is also used for assessment of the metabolic condition of subjects. Energy expenditure (EE) is determined using the Weir equation (e.g., MK-5000, Muromachi Kikai, Tokyo, Japan) ( Figure 10 ) [99] [100] [101] . RQ is calculated using the pulmonary exchange ratio ( Measuring CO2 in exhaled gas is also used for assessment of the metabolic condition of subjects. Energy expenditure (EE) is determined using the Weir equation (e.g., MK-5000, Muromachi Kikai, Tokyo, Japan) ( Figure 10 ) [99] [100] [101] . RQ is calculated using the pulmonary exchange ratio (V The measurement of V ・ CO2 and V ・ O2 is based on the principles of infrared analysis [15, 16] and magneto-electrical analysis [102] , respectively. The administration of nasal continuous positive airway pressure (CPAP) in patients with sleep apnea has been linked to body weight gain [103, 104] . Therefore, long-term exposure to intermittent hypoxia may result in greater reductions in O2 consumption and EE. Human and animal studies have examined the metabolic rates. However, the EE or metabolic rates were not found to be decreased in animal models of intermittent hypoxia or in OSAS patients compared to after the treatment with nasal CPAP [14, 100] . Conversely, Tachikawa et al. reported significant decreases in basal metabolic rate in OSAS patients by nasal CPAP [14] . Non-agitated sleep without airway obstruction enabled by treatment with CPAP may contribute to this phenomenon. Measure of EE and the calculation of RQ by the pulmonary exchange ratio will undoubtedly contribute to obesity research and other research focused on lifestyle-related diseases in the future [100, [105] [106] [107] . VO 2 is based on the principles of infrared analysis [15, 16] and magneto-electrical analysis [102] , respectively. The administration of nasal continuous positive airway pressure (CPAP) in patients with sleep apnea has been linked to body weight gain [103, 104] . Therefore, long-term exposure to intermittent hypoxia may result in greater reductions in O 2 consumption and EE. Human and animal studies have examined the metabolic rates. However, the EE or metabolic rates were not found to be decreased in animal models of intermittent hypoxia or in OSAS patients compared to after the treatment with nasal CPAP [14, 100] . Conversely, Tachikawa et al. reported significant decreases in basal metabolic rate in OSAS patients by nasal CPAP [14] . Non-agitated sleep without airway obstruction enabled by treatment with CPAP may contribute to this phenomenon. Measure of EE and the calculation of RQ by the pulmonary exchange ratio will undoubtedly contribute to obesity research and other research focused on lifestyle-related diseases in the future [100, [105] [106] [107] . When carbohydrates, fat, and protein are oxydized, RQ are calculated to 1.0, 0.7, and 0.8, respectively [108] . Recently, Lin et al. monitored both CO 2 and O 2 concentrations in human breath samples using a home-made gas chromatography/milli-whistle analyzer and reported that the changes in CO 2 concentrations (and the index of CO 2 /O 2 ratio) were related to the changes in blood sugar concentrations [109] . They sugested that their compact gas chromatography system may be used for a non-invasive and time-dependent (continuous and rapid) blood sugar monitoring in the future. In addition, historically, gas chromatography and mass spectrometry had been often used as the gas analyzer in respiratory research, and the peak expired PCO 2 had been measured by this technology [55] [56] [57] . The advantage of these methods over the infrared CO 2 analysis is that concentrations of multiple gases can be simultaneously measured. Nevertheless, the use of mass spectrometry for respiratory research has decreased since 2000, which is likely because of cost and tehcnical fragility of the mass spectrometers, which require more extensive technical support [57] . Furthermore, the method of photoinduced electron transfer is rapidly developping in various research fields, and CO 2 has been reported to be detected using amine-containing fluorophores [110, 111] . The evaluation of local CO 2 concentrations in various small organs of animals might be possible by this technology. In summary, measures of CO 2 concentrations in the air are done using the infrared analyzer. Data are important for both the climate problem and the regulatory monitoring of buildings to avoid poor aeration and more recently COVID-19 transmission. Measure of arterial CO 2 concentration is performed by measuring PaCO 2 using the Severinghaus electrode. The most accurate non-invasive alternative method of PaCO 2 is PtcCO 2 . Measure of CO 2 production with O 2 consumption may be used for further investigation in the various fields of metabolism, obesity with obstructive sleep apnea syndrome, and lifestylerelated diseases. The authors declare no conflict of interest. The following abbreviations are used in this manuscript: Arterial partial pressure of carbon dioxide PaO 2 Arterial partial pressure of oxygen PCO 2 Partial pressure of carbon dioxide PetCO 2 End-tidal carbon dioxide partial pressure of exhaled gas PO 2 Partial pressure of oxygen PtcCO 2 Transcutaneous partial pressure of carbon dioxide RQ Respiratory quotient SARS-CoV-2 Severe acute respiratory syndrome coronavirus 2 SAS Sleep apnea syndrome SD Standard deviation SEM Standard error of the mean SpO 2 Percutaneous oxygen saturation VBGA Venous blood gas analysis VCO 2 Carbon dioxide production VO 2 Oxygen consumption V/Q Ventilation/perfusion Climate change and infectious disease The World Data Centre for Greenhouse Gases. World Meteorological Organization. WMO WDCGG Data Summary. WDCGG No. 44 On the determination of maximum permissible carbon dioxide concentrations in the air of apartment buildings and public buildings The Physiological Basis of Health Standards for Dwellings; Public Health Papers No. 33; World Health Organization Exhaled CO 2 as COVID-19 infection risk proxy for different indoor environments and activities For the China Novel Coronavirus investigating and research team. A novel coronavirus from patients with Pneumonia in China Pathophysiology, transmission, diagnosis and treatment of coronavirus disease 2019 (COVID-19): A Review Respiratory monitoring in critical care Acute respiratory failure Arterial blood gases Statistical methods for assessing agreement between two methods of clinical measurement Ventilation/Blood Flow and Gas Exchange Changes in energy metabolism after continuous positive airway pressure for obstructive sleep apnea Calibration of Infra-Red CO 2 Gas Analyzers The calibration of infra-red gas analysers for use in the estimation of carbon dioxide A rapid infra-red gas analyzer Non Dispersive Infrared Carbon dioxide poisoning: A literature review of an often forgotten cause of intoxication in the emergency department Hypothesis: Potentially systemic impacts of elevated CO 2 on the human proteome and health. Front. Public Health. 2020, 8, 543322 Shut that window! Open that window! Coronavirus in winter presents new challenge CO 2 concentration monitoring inside educational buildings as a strategic tool to reduce the risk of SARS-CoV-2 airborne transmission Airborne transmission of SARS-CoV-2: The world should face the reality Airborne route and bad use of ventilation systems as non-negligible factors in SARS-CoV-2 transmission Government of Japan. Suggestion to the Japanese Governmental Officers to Facilitate the Important Writings to Various Guidelines in Order to Prevent COVID-19 FAQs on Protecting Yourself from COVID-19 Aerosol Transmission. Version: 1 Four die in fire suppression system accident in Tokyo parking garage Blood gas electrodes and quality assurance History of blood gas analysis. III. Carbon dioxide tension Disorders of venntilation Chronic obstructive pulmonary disease Acidosis and alkalosis Regulation of ventilation in metabolic acidosis and alkalosis Blood gas classification Regulation of acids, bases, and electrolytes American Association for Respiratory Care. AARC clinical practice guideline. Sampling for arterial blood gas analysis Mechanical ventilation History of blood gas analysis. VII. Pulse oximetry The accuracy of pulse oximetry in the emergency department Use of venous blood for pH and carbon-dioxide studies: Especially in respiratory failure and during anaesthesia Venous blood as an alternative to arterial blood for the measurement of carbon dioxide tensions Comparison of arterial and venous blood gas values in the initial emergency department evaluation of patients with diabetic ketoacidosis Comparison of blood gas and acid-base measurements in arterial and venous blood samples in patients with uremic acidosis and diabetic ketoacidosis in the emergency room Venous pCO 2 and pH can be used to screen for significant hypercarbia in emergency patients with acute respiratory disease Can peripheral venous blood gases replace arterial blood gases in emergency department patients? Can Comparison of simultaneously obtained arterial and capillary blood gases in pediatric intensive care unit patients Clinical decision making based on venous versus capillary blood gas values in the wellperfused child Arterial versus capillary blood gases: A meta-analysis Hyperventilation and finger exercise increase venousarterial P CO2 and pH differences Effects of hyperventilation on venous-arterial bicarbonate concentration difference: A possible pitfall in venous blood gas analysis Analyzer for accurate estimation of respiratory gases in one-half cubic centimeter samples Analysis of oxygen, carbon dioxide and nitrous oxide mixtures with the Scholander apparatus Monitoring Exhaled Carbon Dioxide Determination of respiratory gases (CO 2 , O 2 , Ar and N 2 ) with gas solid chromatography. Scand Relationship between arterial and peak expired carbon dioxide pressure during anesthesia and factors influencing the difference Mass spectrometer for respiratory research Noninvasive blood gas monitoring AARC clinical practice guideline: Capnography/Capnometry during mechanical ventilation End-tidal carbon dioxide concentration during cardiopulmonary resuscitation Adult basic and advanced life support writing group American Heart Association guidelines for cardiopulmonary resuscitation and emergency cardiovascular care European Resuscitation Council Guidelines 2021: Adult advanced life support Policy Statement: Verification of Endotracheal Tube Placement End-Tidal carbon dioxide monitoring during cardiopulmonary resuscitation. A prognostic indicator for survival Respiratory therapies in the critical care setting. Should every mechanically ventilated patient be monitored with capnography from intubation to extubation? Respir. Care Developed By: Committee on Standards and Practice Parameters Current applications of capnography in non-intubated patients Comparing the novel microstream and the traditional mainstream method of end-tidal CO 2 monitoring with respect to PaCO 2 as gold standard in intubated critically ill children Transcutaneous PCO 2 electrode design with internal silver heat path tcPCO 2 electrode design, calibration and temperature gradient problems Transcutaneous PO2 monitoring in routine management of infants and children with cardiorespiratory problems Transcutaneous P CO2 measurement with a miniaturised electrode Transcutaneous electrodes for blood gas determination Clinical uses of transcutaneous oxygen monitoring Transcutaneous and capillary pCO2 and pO2 measurements in healthy adults A survey of transcutaneous blood gas monitoring among European neonatal intensive care units Concordance between transcutaneous and arterial measurements of carbon dioxide in an ED Comparison of transcutaneous and capillary measurement of PCO2 in hypercapnic subjects Effects of the electrode temperature of a new monitor, TCM 4 , on the measurement of transcutaneous oxygen and carbon dioxide tension AARC clinical practice guideline: Transcutaneous monitoring of carbon dioxide and oxygen: 2012 Transcutaneous oxygen tension: A useful predictor of ulcer healing in critical limb ischaemia Comparison of Accuracy: Bland-Altman analysis of alternative examinations in the field of respiratory medicine Agreement of carbon dioxide levels measured by arterial, transcutaneous and end tidal methods in preterm infants