key: cord-0685717-i3fp37ag
authors: Wilson, Amanda M.; King, Marco‐Felipe; López‐García, Martín; Clifton, Ian J.; Proctor, Jessica; Reynolds, Kelly A.; Noakes, Catherine J.
title: Effects of patient room layout on viral accruement on healthcare professionals' hands
date: 2021-04-29
journal: Indoor Air
DOI: 10.1111/ina.12834
sha: 3d53bff8d395ea0a436712ad9bd76a6d1da7fd67
doc_id: 685717
cord_uid: i3fp37ag

Healthcare professionals (HCPs) are exposed to highly infectious viruses, such as norovirus, through multiple exposure routes. Understanding exposure mechanisms will inform exposure mitigation interventions. The study objective was to evaluate the influences of hospital patient room layout on differences in HCPs' predicted hand contamination from deposited norovirus particles. Computational fluid dynamic (CFD) simulations of a hospital patient room were investigated to find differences in spatial deposition patterns of bioaerosols for right‐facing and left‐facing bed layouts under different ventilation conditions. A microbial transfer model underpinned by observed mock care for three care types (intravenous therapy (IV) care, observational care, and doctors' rounds) was applied to estimate HCP hand contamination. Viral accruement was contrasted between room orientation, care type, and by assumptions about whether bioaerosol deposition was the same or variable by room orientation. Differences in sequences of surface contacts were observed for care type and room orientation. Simulated viral accruement differences between room types were influenced by mostly by differences in bioaerosol deposition and by behavior sequences when deposition patterns for the room orientations were similar. Differences between care types were likely driven by differences in hand‐to‐patient contact frequency, with doctors' rounds resulting in the greatest predicted viral accruement on hands.

Healthcare professionals (HCPs) face a number of unique occupational hazards including exposures to infectious agents that may be present in the work environment due to infected patients, visitors, coworkers, or contamination in the environment. In the United States, more than 18 million workers are in the healthcare industry, and as this number continues to increase, HCPs have some of the highest rates of occupationally related illness. 1 Worldwide, the prioritization of the health of HCPs has been emphasized due to increased healthcare demands in response to the COVID-19 pandemic. 2,3 By July 16, 2020, the U.S. Centers for Disease Control and Prevention (CDC) reported HCPs accounting for approximately 4% (100 570 out of 2.5 million) of U.S. COVID-19 cases. 4 However, the proportion of cases attributable to HCPs could be higher due to only having HCP status data for 22% of total reported cases. 4 In a study of 120 075 UK essential and non-essential workers, HCPs had a 7.43 (95% CI: 5.52, 10 .00) times greater risk of severe COVID-29 relative to non-essential workers. 5 This risk ratio was greater than that of "social and educational workers" and of "other essential workers" relative to non-essential workers. 5 Even outside of pandemic conditions, HCPs may be regularly exposed to other highly infectious agents, such as norovirus, a nonenveloped, single-stranded RNA enteric virus 6,7 that is generally spread via a fecal-oral pathway and can be transmitted via personto-person, fomite, and airborne routes where aerosols are inhaled into the mouth. [8] [9] [10] Healthcare workers have been shown to be at high risk for norovirus infection during outbreaks in occupational settings. 11 Norovirus infection of HCPs can lead to not only health risks and loss of time at work but also risks to patients, especially considering the potential for asymptomatic infection and high viral shedding. 11 Analysis of the burden of norovirus in UK hospitals over a 3-year period suggests an annual median of 290 000 bed-days was attributable to norovirus, displacing 57 800 other patients and costing £107.6 million. 12 The same study analyzed reported data on the impacts on HCPs, estimating that a median of 4200 members of staff was absent annual during norovirus outbreaks.

While norovirus has been shown to be transmitted via a fomite route, exposure routes in the environment are often interconnected, where norovirus on fomites may originate from bioaerosol deposition. Bioaerosols may originate from vomit or fecal shedding events.

In this way, exposures via air, surfaces, and direct person-to-person contact (such as contacts between HCPs and patients) are a part of a larger system contributing to exposure.

The potential for fomite contamination spread via hand-tosurface contacts, especially for HCPs, has been a long-recognized mechanism of nosocomial disease transmission. 13, 14 The frequency and sequence of contacts with different surface types, 15, 16 for different care types during simulated vs. actual procedures, 16, 17 and the effect of these differences on microbial exposures have been explored. 18 However, it is unknown how spatial differences between patient rooms may affect deposition patterns, hand-to-surface behaviors of healthcare professionals, and subsequent exposures.

Understanding the influence of spatial differences on behavior and contamination spread via the air-surface interface is important for advancing efforts for developing environment-specific infection control protocols.

The objective of this study was to evaluate the influence of differences in HCP behavior and differences in airflow and subsequent bioaerosol deposition on surfaces for two single-patient room layouts on norovirus accruement on HCP hands. A secondary objective was to demonstrate how a calibrated microbial transfer model can be utilized in exposure modeling. To meet these objectives, an integrated exposure model composed of a finite volume Navier-Stokes computational fluid dynamics (CFD) model using Lagrangian particle tracking, 19 a human behavior model informed by real-world data, 17 and a viral transfer model calibrated for representation of transfer of enteric viruses 20 was developed.

Hand-to-surface and hand hygiene events (glove donning/doffing and hand sanitizer use) were recorded for healthcare professionals in single-patient rooms conducting mock IV-care, observational care, or doctors' rounds. A hand-to-surface contact event was defined as a single hand making physical contact with the object. Details regarding behavioral observations have been described by King et al. 16 Discrete Markov chains informed by observed behaviors were used to simulate sequences of hand-to-surface contacts, glove donning/ doffing, or hand hygiene, as has been done in other healthcare worker behavior modeling. 21 Six transitional probability matrices were created for right-and left-facing rooms for observational care, IV-drip care, and doctors' rounds using the function "markovchainFit" from the R statistical software package, markovchain. For each probability matrix, behavior states included entrance into patient room, exit from patient room, use of alcohol gel, hand-to-equipment contact, hand-to-farpatient surface contact, hand-to-near-patient surface contact, importance of proper donning/doffing technique and the 5 moments for hand hygiene (which include after a patient contact) for lowering occupational microbial exposures.

hand-to-patient contact, doffing of gloves, donning of gloves, and hand-to-hygiene surface contact. Categories of surfaces matching these surface type designations for categorizing observed behaviors have been described previously by King et al. 17 Transitional probability matrices were altered so that exit from patient room was an absorbing state and the probability of an "entrance into patient room" event after the initial entrance was zero.

When generating behavior sequences, each sequence began with entrance into the patient room. New events would be generated until exit from the patient room occurred. To evaluate the effect of iteration choice on mean accruement on hands over the number of contacts, mean concentrations on the right hand were compared for 1000; 5000; and 10 000 iterations per room type (left-and rightfacing) and care type (IV-care, observational care, doctors' rounds)

combination. There were no notable differences in mean concentration on the hand over the number of contacts between results for the 5000 and 10 000 iteration runs (Figures S1-S3). Therefore, 5000 iterations were used.

In Scenario 1, the same concentrations of norovirus on surfaces were used regardless of patient bed orientation. Heterogeneity in concentrations between surfaces was informed by CFD simulations for the right-facing room orientation, and these results were then used for both the right-and left-facing rooms. Therefore, any differences between exposures by room orientation or procedure type could then be determined to be behavior driven. In Scenario 2, CFD was used to predict the likely effect of patient bed orientation and room layout on heterogeneous deposition of bioaerosols on surfaces of different surface types (near-patient vs. far-patient surfaces, for example).

During the contact, k, with a surface, a change in norovirus concentration on either a gloved or ungloved hand was estimated as a func- While asymmetrical transfer efficiencies have been reported for certain organisms, and it has been noted that assuming transfer efficiency is the same in both directions can result in substantial modeling errors, [23] [24] [25] MS2 and PhiX174, enteric viruses, have been shown to transfer similarly from hand-to-surface and surface-to-hand. 20, 24 Changes in concentration on surfaces were not tracked, as it was assumed that different portions of the same surface may be contacted and that deposited virus on that surface was spread homogeneously across the entire surface area. Inactivation of virus was not incorporated, as non-enveloped viruses can persist in the environment for longer periods relative to the duration of episodes of care. For example, Fedorenko et al. (2020) demonstrated that MS2 and PhiX174, non-enveloped enteric viruses, in evaporated saliva microdroplets on a glass surface only reduced by approximately 1 log 10 over a 14-hour period for a range of relative humidities. 26 By comparison, observed mock care episodes used to inform simulated behaviors in this study ranged from 0.6 to 11.7 minutes. 17

Values for transfer efficiency ( ) were informed by a probability distribution calibrated to the model through previous work relevant for hand-to-surface contacts and enteric viral exchange between two contaminated surfaces. 20 It is acknowledged that these transfer efficiencies are not specific to the wide variety of surfaces anticipated in this exposure scenario. However, to our knowledge, other transfer efficiencies available in the literature 27, 28 are limited in that they do not account for both surfaces being contaminated. While the first contact in the simulation assumes an uncontaminated hand contacts a surface, following contacts involve exchange of norovirus between surfaces and hands. Since this distribution was calibrated for handto-surface contacts, specifically, a different value was used for handto-patient contacts.

King et al. found that Escherichia coli transfer efficiencies for ungloved contacts (49%, 95% CI = 32-72%) were higher than for gloved contacts (30%, 95% CI = 17-49%). 29 This has been demonstrated for other organisms as well. 23 Transfer efficiency for a gloved contact was therefore assumed to be 0.61 times smaller than the randomly sampled transfer efficiency from the posterior distribution of transfer efficiencies from Wilson et al. 20 While microbial transfer between hand-to-hand contacts has been demonstrated, transfer efficiency values were not available for application in the microbial transfer model. Therefore, we assumed that transfer efficiency between the gloved or ungloved hand of a healthcare worker and the skin or clothing of a patient could span a wide range of transfer efficiencies. We assumed a uniform distribu- 

Different distributions to describe the fraction of the hand used per hand-to-surface contact (S H ) were used depending upon the contact type. For entrance and exit from the patient room, it was assumed

that an open hand grip would be used. Therefore, a uniform distribution was randomly sampled with a minimum of 0.10 and a maximum of 0.21, the minimum and maximum S H of left and right hands measured by AuYeung et al. 30 For patient contacts, it was assumed that a partial front palm without fingers up to a full front palm with fingers may be used. 30 Therefore, a uniform distribution with a minimum of 0.03 and a maximum of 0.25 was randomly sampled, where these minimum and maximum values were informed by AuYeung et al. 30 The fractions of the hand used for partial front palm without finger contact configurations are similar to those for front partial fingers, 30 so this range includes values that could represent this configuration as well.

For all other contacts, it was assumed that various grip and hand press contact types could be used, aside from hand immersion contacts described by AuYeung et al. 30 Therefore, a uniform distribution with a minimum of 0.008 (the minimum of front partial fingers/5 fingers to represent a single fingertip contact) and a maximum of 0.25 (the maximum of full front palm with fingers) was used. 30

It was assumed at the start of the simulation that HCPs were not wearing gloves. If a glove event occurred, this was not donning or doffing specific, but, rather, the current state was changed from either gloved to ungloved or from ungloved to gloved. This prevented instances such as a glove donning event following a later glove donning event without an intermediary doffing event or sequential glove doffing events without an intermediary donning event. For hand hygiene events, it was ensured that this was under ungloved conditions. If a hand hygiene event was selected when gloves were on the hands, a new event was randomly sampled until a non-hand-hygiene event was selected. were on for this hand hygiene moment, a new event was randomly sampled to replace the hand sanitizer event under the assumption that hand sanitizer would not be applied with gloves on.

Infection risks were estimated to evaluate how differences in viral concentration on hands would relate to risk differences between care types and room orientations. Due to lack of sequence data to include hand-to-face contacts within the simulation, a single handto-face contact was assumed at the end of the simulation to estimate an infection risk based on the concentration on the hands at the end of the episode of care. Single hand-to-face contacts have been used in other exposure modeling studies to compare risks between different scenarios. 32 However, it is acknowledged that these risks do not reflect those of reality, as they do not account for the timing and frequency of expected hand-to-face contacts and are only using these risks for comparison purposes.

To estimate an infection risk, a viral dose was first estimated by multiplying a transfer efficiency, hand surface area, and fraction of the total hand surface area to be used by the concentration on the right or left hand, where either hand had a 50/50 chance of being chosen based on reported lack of differences in contact sequences for right and left hands in a micro-activity study. 33 If no gloves were on, a transfer efficiency was randomly sampled from a normal distribution informed by Rusin et al. 28 and left-and right-truncated at 0 and 1, respectively. If gloves were worn, these transfer efficiencies were reduced, consistent with how transfer efficiencies for handto-fomite contacts were handled, described above. Total hand surface area for a single hand was randomly sampled from a uniform distribution (min = 445 cm 2 , max = 535 cm 2 ) informed by Beamer et al. 34 and the U.S. EPA's Exposure Factors Handbook (2011). 35 It was assumed a single fingertip or a fraction of the palm would be used for the contact, and this fraction of total hand surface area that this represents was randomly sampled from a uniform distribution (min = 0.006, max = 0.012). The minimum and maximum fractions of the hand that all fingertips represent reported by AuYeung et al. 30 for adult hands were divided by 5 to inform the distribution.

To relate these doses to infection risk, an approximate beta-Poisson curve was used, where α = 0.104 and β = 32.3 (Equation 2) 36 :

Although this curve is being used to estimate risks for comparison purposes, it is acknowledged that multiple dose-response curves for norovirus exist and should be considered when predicting risks for risk assessments. 36 

The CFD methodology by King et al. 19 was closely followed. Surface areas of surfaces are listed in Table S1 . Sizes of particles were not tracked upon deposition, meaning that the fraction of deposited particles does not account for differences in particle size or virus concentrations across ranges of particle sizes. However, the distribution of particle sizes in this study was low, with most of the distribution of sizes being below 5 μm, meaning we would not expect as much error due to assuming homogeneous deposition of particle sizes across surfaces as if we considered a range of larger aerosol sizes in which larger aerosols may settle considerably faster than fine aerosols <5 μm.

For the right-facing room orientation, estimated particle deposition on the desk was used to inform the concentration anticipated For both room orientations, particles deposited on the patient were used to inform concentrations on the patient. The "in" and "out" event, entrance, and exit from the patient room, respectively, involved contact with the door handle. In this case, it was assumed that concentrations on the door handle were zero since the focus of this study was on fomite-mediated exposures as a result of particle deposition alone.

Spearman correlation coefficients were calculated to quantify monotonic relationships between model inputs and the mean and maximum concentrations on hands. Since some parameters, such as transfer efficiency, surface concentration, and the fraction of the hand used for a contact, varied by contact, the mean value of these parameters per iteration was used. Spearman correlation coefficients were also calculated to investigate relationships between input parameters, since some inputs were related, where a greater amount of patient contacts could relate to a greater mean transfer efficiency since larger transfer efficiencies were used for hand-topatient contacts than for hand-to-surface contacts, for example.

Since some relationships between model inputs and mean or maximum viral concentration on hands may not be monotonic, scatter plots were also visually inspected.

In addition to the baseline model with a ventilation rate of 6 ACH and the windows acting a velocity inlet and the door acting as a pressure outlet, particle deposition patterns for a number of other scenarios were explored: the door acting as a velocity inlet and windows acting as a pressure outlet, the small windows acting as velocity inlets and the large window acting as a pressure outlet, and exploring 2.5 ACH and 10 ACH in addition to 6 ACH. This reflects guidance for UK hospitals which recommends 6 ACH for bedrooms and 10 ACH for treatment rooms and isolation rooms, 39 and also recognizes that many hospitals, especially those that are older or naturally ventilated, have air change rates below the current standards. Mean viral concentrations on hands for left-and right-facing rooms were then compared for these 9 scenarios (3 ACHs × 3 velocity inlet, pressure outlet scenarios).

The predicted deposition of particles on surfaces between the left-and right-facing rooms in the primary model (6 ACH, windows as velocity inlets, door as pressure outlet) were notably different ( Figure 1) . The left-facing room resulted in 51.18% of emitted particles depositing on the patient, while the right-facing room only resulted in 16.82% (Figure 1 ). High passage of particles through the door surfaces was expected, such as for the right-facing room (79.32% of particles passing through the door) as this was the airflow outlet and windows were velocity inlets. While not within the scope of this exposure assessment, this would suggest that these particles would be those that would be extracted by ventilation in the corridor or potentially to another patient room. Viewing the particle tracks, it can be seen that in the right-facing room, the incoming

air from the open windows may be directing air from the injection point near the patient mouth out the door, whereas in the left-facing room, particles appear to remain in the room longer, leaving more opportunities for deposition on the patient, floor, and surrounding surfaces (Figures 1 and 2) . 

The transitional probability matrices for doctors' rounds, regardless of room orientation, demonstrated a high probability of repetitive contacts with the patient (Figure 3) , where the left-and right-facing orientation probabilities of the next event being a hand-to-patient contact given a current hand-to-patient contact were 0.68 and 0.81, respectively. This is also reflected in the proportions of events that make up all events in simulations for each room orientation and care type, where patient contacts made up 32% and 42% for contacts in doctors' rounds in left-and right-facing rooms, respectively ( Figure 4 ). right-facing observational care, where this contact type accounted for 57% and 44% of events in left-and right-facing rooms, respectively ( Figure 4 ). This is consistent with many high probability transitions from a given surface or event to a hand-to-equipment contact for observational care, especially for left-facing rooms (Figure 3 ).

When differences in viral deposition on surfaces and differences in behaviors due to room orientation were accounted for, notable differences in viral accruement on hands between the two room F I G U R E 2 Right-and left-facing room (A) geometry (1=windows, 2=desk, 3=chair, 4=bed, 5=side table, 6=patient, 7=door) and particle tracking illustrations colored by residence time for the (B) right-facing room and (C) left-facing room for the baseline scenario at 6 ACH and windows as velocity inlets and the door as a pressure outlet. It should be noted that these are infection risks for only one hand-to-face contact directly after an episode of care. In some simulated cases, a hand-to-face contact was made with a freshly When deposition differences were removed so that only behavioral differences between room orientations were accounted for, differences in accruement on hands between left-and right-facing room layouts were diminished but with slightly more accruement on the hands for the right-facing orientation than for the left-facing orientation ( Figure 5 ). In both right-and left-facing rooms regardless of deposition differences, the least amount of viral accruement occurred for IV-care episodes, while doctors' rounds resulted in the most accruement ( Figure 5 ). This is consistent with doctors' rounds resulting in the greatest mean infection risks, described above.

In addition to increased risks for HCPs, greater viral accruement on hands could lead to higher risks to patients as well, as doctors'

rounds have larger proportions of patient contacts compared with other care types ( Figure 4 ). The number of iterations used to inform the mean concentration on hands per contact number can be seen in Figure S4 .

Because the microbial transfer model in this study assumes transfer of virus in both directions, loss of virus from the hands occurs depending upon a concentration gradient between the hand (gloved or ungloved) and the surface in contact (Equation 1). The use of hand sanitizer is one mechanism by which accruement on hands can be lost ( Figure 6 ). This is especially advantageous following contacts that resulted in fast viral accruement, such as contacts with a patient, demonstrated in a plot of viral accruement for one model iteration in Figure 6 .

While the use of gloves can be an effective means for lowering potential exposures, glove events did not account for most of the losses from hands that occurred over the contacts ( Figure 7A ), in part potentially due to the low frequency of glove events (Figure 4 ).

More frequent events, such as contacts with equipment surfaces, especially during observational care, contributed to more instances of viral loss from the hands than most of the glove or even alcohol hand sanitizer events ( Figure 7A ) , room orientation (left-facing, right-facing) and assumptions regarding differences in viral concentrations on surfaces and behaviors based on room orientation. plots demonstrate the effects of differences in surface concentrations influenced by deposition differences between the left-and right-facing rooms along with differences in transitional probability matrices for simulating sequences of behaviors for the two room orientations. "Behavioral Differences Only" plots demonstrate the effects of deposition patterns for the right-facing room used for both right-and left-facing rooms so that differences in accruement are only representative of differences in transitional probability matrices for the care types by room orientation. Concentrations here represent average concentrations estimated to be on hands at any given simulated moment, explaining why some concentrations (viral particles/cm 2 ) multiplied by the cm 2 of a hand would be less than 1, indicating a less than 100% chance of a viral particle being present on the hand.

Example of large increases in accruement due to hand-to-patient contacts and decreases due to use of alcohol-based hand sanitizer.

the importance of considering hand hygiene in the form of hygiene consistency over the duration of an entire care episode as opposed to evaluating hand hygiene merely based on frequency. 

Mean concentration on both hands (viral particles/cm 2 ) vs. the percent of total events that are hand sanitizer events for scenarios*. *Spearman correlation coefficients and p values calculated for simulations in which at least 1 hand hygiene event and at least 1 handto-patient contact occurred are reported per care type and room orientation combination. Concentrations here represent average concentrations estimated to be on hands at any given simulated moment, explaining why some concentrations (viral particles/cm 2 ) multiplied by the cm 2 of a hand would be less than 1, indicating a less than 100% chance of a viral particle being present on the hand.

with surface concentrations being the strongest (Figures S5-S10) .

When observing distributions of log 10 mean concentrations on hands, notable differences in magnitude and shape of distributions can be seen for simulations in which at least 1 patient contact was made versus none ( Figure S11 ). Scatter plots can be seen in supplementary materials, Figures S12-S22.

Notable differences were seen in particle deposition patterns ( Figures S23-S25 ) and subsequent accruement on hands between left-and right-facing rooms between the ACH and the inlet/outlet scenarios (Figures S26-S28) . Regardless of ACH, the left-facing orientation resulted in more particle deposition on the patient than for the right-facing orientation when the windows were the velocity inlets and the door was a pressure outlet and when the windows were velocity inlets and pressure outlets ( Figures S23-S25 ). However, when the windows were the pressure outlets and the door was a velocity inlet, the fractions of particles deposited on the patient were more similar for left-and right-facing rooms ( Figures S23-S25 ). When deposition on the patient was more similar, such as for 6 ACH and the window as the pressure outlet and door as the velocity inlet ( Figure S26C ), greater viral accruement was observed for doctors' rounds for the right-facing rooms as opposed to left-facing. This was also observed when the effect of differences in bioaerosol deposition was removed, such as in the primary model (6 ACH, door as pressure outlet, windows as velocity inlets), where doctors' rounds for the right-facing room resulted in slightly more viral accruement than for the left-facing rooms when the same bioaerosol deposition pattern was used ( Figure 5 ).

In some cases, the ACH did appear to affect which room orientation resulted in greater viral accruement on hands for doctors' rounds for the same inlet and outlet conditions. For example, assuming 2.5 or 6 ACH and the windows acting as pressure outlets and velocity inlets resulted in greater viral accruement on hands for left-facing rooms ( Figures S26B and S28B ) while for 10 ACH the viral accruement was slightly larger for right-facing rooms ( Figure S27B ).

Despite differences between left-and right-facing orientations and effects of ACH, doctors' rounds remained the care type that resulted in the greatest viral accruement regardless of ACH or inlet/ outlet conditions. The effect of having the mouth as another inlet in addition to having an injection point near the patient mouth was also explored for one of the ventilation scenarios, and it did impact the fraction of particles exiting the door and depositing on the wall but did not greatly influence the fraction of deposition on the patient surface (data not shown). Since the fraction of deposition on patients appears to be driving differences in between room orientations, it is anticipated that treating the mouth as an additional inlet would not have greatly influenced the exposure estimation results.

However, variability in emission characteristics should be further explored in future work.

This study illustrates that the location of the patient and furniture, alone, could have effects on both the patterns of bioaerosol deposition on surfaces and also on healthcare workers' micro-activity This rationale is also supported by a strong monotonic relationship between number of patient contacts and mean viral concentration on hands (ρ = 0.88 for doctors' rounds in left-facing rooms; Figure S9 ).

These hand-to-patient contacts were not only frequent ( Figure 4) but also repetitive for doctors' rounds ( Figure 2 ). This is an important distinction, because repetitive contacts created opportunities for fast viral accruement relative to hand-to-patient contacts spread out over the course of an episode of care. This phenomenon can be seen in simulations in which greatest viral losses due to alcohol hand sanitizer use or glove donning/doffing occurred ( Figures 7B and 8) ,

despite the fact that other events, such as contacts with equipment, more frequently contributed to viral losses from hands ( Figure 7A ).

Overall, an increased rate of hand sanitizer events was related to a decrease in mean viral concentrations on hands for all care types and room orientations ( Figure 9 ). However, there were instances where hand sanitizer was applied after contacts with surfaces that did not result in large viral accruement, where the sanitizer did less to lower exposure. This can be seen in Figure 6 where an early alcohol hand sanitizer behavior occurred before several hand-to-patient contacts that resulted in large increases in viral concentration on hands, later decreased by another hand sanitizer event ( Figure 6 ). was available in human behavior data, including which parts of objects are more commonly touched than others. This approach would also offer opportunities to incorporate grip-specific hand configurations to more accurately capture the surface area of the hand that was used. 30 Additionally, transfer efficiencies used here originated from a fingertip-to-surface contact scenario. 20 While the fingertip or "fingerpad" is often used in transfer efficiency studies, 24, 27, 29 transfer efficiency variability by area of the hand used would provide more contact-specific data to further inform the integration of microbial transfer and human behavior models. In chemical transfer efficiency contexts, hand presses and fingertip presses have been used. 43, 44 Characterizing what part of the hand is used for self-inoculation moments would also be important, as loading on the palm but hand-to-face contact with the fingertip may not result in exposure. Assuming viral loading on the hands is homogeneous across the hands may over-or under-estimate doses and subsequent infection risks.

This study demonstrates with exposure modeling that doctors' rounds may pose greater exposure and infection risks to healthcare professionals than IV-care and observational care, due to faster viral accruement on hands due to a greater frequency of hand-to-patient contacts. Differences between room orientations in fomite-mediated exposures via deposited bioaerosols may be a function of changes in human behavior (different sequences of hand-to-surface contacts) and differences in bioaerosol deposition. This indicates that bioaerosols and ventilation design could have implications for not only inhalation exposures but also fomite-mediated exposures, especially considering the effects of room layout on room-and care type-specific hand-to-surface contact behaviors. Further expansion of integrated exposure models incorporating behaviors related to dose, such as self-inoculation, will allow for risk-informed engineering controls and room design to limit the frequency of hand-to-surface contacts with surfaces experiencing greater bioaerosol deposition. This work also allows for evaluation of other interventions lower in the hierarchy of controls, including use of PPE and hand sanitizer. As demonstrated in the simulations in this work, the timing of glove donning/doffing and hand sanitizer use can have important implications for their ability to protect healthcare workers, especially considering hand-to-patient contacts. These models can inform administrative controls, such as training that quantitatively illustrates concepts such as the importance of proper donning/doffing technique and the 5 moments for hand hygiene (which include after a patient contact) 39 for lowering occupational microbial exposures.

The study was approved by the NHS Health Research Authority 

None to report. 

The National Institute for Occupational Safety and Health (NIOSH)

COVID-19: protecting healthcare workers is a priority

COVID-19: The daunting experience of healthcare workers in Sardinia

Update: characteristics of health care personnel with COVID-19 -United States

Occupation and risk of severe COVID-19: prospective cohort study of 120 075 UK Biobank participants

Global burden of norovirus and prospects for vaccine development

Airborne or fomite transmission for norovirus? A case study revisited

Vomiting as a symptom and transmission risk in norovirus illness: evidence from human challenge studies

Norovirus shedding among food and healthcare workers exposed to the virus in outbreak settings

Estimating the hospital burden of norovirus-associated gastroenteritis in England and its opportunity costs for nonadmitted patients

Hand hygiene for the prevention of nosocomial infections

Hand hygiene: from research to action

Where do hands go? An audit of sequential hand-touch events on a hospital ward

Relationship between healthcare worker surface contacts, care type and hand hygiene: an observational study in a single-bed hospital ward

Why is mock care not a good proxy for predicting hand contamination during patient care?

Modelling the risk of SARS-CoV-2 infection through PPE doffing in a hospital environment

Bioaerosol deposition in single and two-bed hospital rooms: a numerical and experimental study

Evaluating a transfer gradient assumption in a fomite-mediated microbial transmission model using an experimental and Bayesian approach

Modeling environmental contamination in hospital single-and four-bed rooms

A model of exposure to rotavirus from nondietary ingestion iterated by simulated intermittent contacts

Fomite-fingerpad transfer efficiency (pick-up and deposit) of Acinetobacter baumannii -with and without a latex glove

Virus transfer between fingerpads and fomites

Asymmetric transfer efficiencies between fomites and fingers: Impact on model parameterization

Virus survival in evaporated saliva microdroplets deposited on inanimate surfaces

Transfer efficiency of bacteria and viruses from porous and nonporous fomites to fingers under different relative humidity

Comparative surface-to-hand and fingertip-to-mouth transfer efficiency of gram-positive bacteria, gram-negative bacteria, and phage

Bacterial transfer to fingertips during sequential surface contacts with and without gloves

The fraction of total hand surface area involved in young children's outdoor hand-to-object contacts

Comparison of estimated norovirus infection risk reductions for a single fomite contact scenario with residual and nonresidual hand sanitizers

Application of quantitative microbial risk assessment for selection of microbial reduction targets for hard surface disinfectants

Quantified outdoor micro-activity data for children aged 7-12-years old

Modeling of human viruses on hands and risk of infection in an office workplace using micro-activity data

Exposure factors handbook 2011 edition (EPA/600th/R-09/052F)

Comparison of risk predicted by multiple norovirus dose-response models and implications for quantitative microbial risk assessment

Airflow dynamics of human jets: sneezing and breathing -potential sources of infectious aerosols

Sources of airborne norovirus in hospital outbreaks

Department of Health. Health technical memorandum 03-01: specialised ventilation for healthcare premises. Part A: design and validation

Mechanisms for floor surfaces or environmental ground contamination to cause human infection: a systematic review

Are hospital floors an underappreciated reservoir for transmission of health care-associated pathogens?

Assessment of overheating risk in gynaecology scanning rooms during near-heatwave conditions: a case study of the Royal Berkshire Hospital in the UK

Estimation of hand-to-mouth transfer efficiency of lead

Characterizing residue transfer efficiencies using a fluorescent imaging technique

Effects of patient room layout on viral accruement on healthcare professionals' hands