key: cord-0682008-ofm4zr03
authors: Edis, Zehra; Bloukh, Samir Haj
title: Facile Synthesis of Bio-Antimicrobials with “Smart” Triiodides
date: 2021-06-10
journal: Molecules
DOI: 10.3390/molecules26123553
sha: 48bffffd49dc8077227c2d5c974fd7a308085994
doc_id: 682008
cord_uid: ofm4zr03

Multi-drug resistant pathogens are a rising danger for the future of mankind. Iodine (I(2)) is a centuries-old microbicide, but leads to skin discoloration, irritation, and uncontrolled iodine release. Plants rich in phytochemicals have a long history in basic health care. Aloe Vera Barbadensis Miller (AV) and Salvia officinalis L. (Sage) are effectively utilized against different ailments. Previously, we investigated the antimicrobial activities of smart triiodides and iodinated AV hybrids. In this work, we combined iodine with Sage extracts and pure AV gel with polyvinylpyrrolidone (PVP) as an encapsulating and stabilizing agent. Fourier transform infrared spectroscopy (FT-IR), Ultraviolet-visible spectroscopy (UV-Vis), Surface-Enhanced Raman Spectroscopy (SERS), microstructural analysis by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-Ray-Diffraction (XRD) analysis verified the composition of AV-PVP-Sage-I(2). Antimicrobial properties were investigated by disc diffusion method against 10 reference microbial strains in comparison to gentamicin and nystatin. We impregnated surgical sutures with our biohybrid and tested their inhibitory effects. AV-PVP-Sage-I(2) showed excellent to intermediate antimicrobial activity in discs and sutures. The iodine within the polymeric biomaterial AV-PVP-Sage-I(2) and the synergistic action of the two plant extracts enhanced the microbial inhibition. Our compound has potential for use as an antifungal agent, disinfectant and coating material on sutures to prevent surgical site infections.

Increasing resistance to multi-drug resistant pathogens against common antibiotics and antimicrobial agents endangers the survival of our species [1, 2] . Nosocomial infections, steadily increasing treatment duration and costs slash quality of life throughout the world [1] [2] [3] . This trend quietly impacted COVID-19 related treatment outcomes and death rates behind the scenes [4, 5] . Nosocomial infections of severely ill patients in health care settings exacerbated pain, suffering and death [5, 6] . Combatting COVID-19 requires administering antibiotics to ameliorate the health condition of the patients [5, 6] . Plant-based alternatives targeting bacterial virulence factors and biofilm formation emerge increasingly as sustainable solutions against microbial resistance [7, 8] . Nano-biomaterials revealed promising results as antimicrobial agents either as plant nanoparticles or biosynthesized nanoparticles [8, 9] . Silver nanoparticles are preferred for drug delivery and as antimicrobial agents, but may have possible cytotoxic properties and unknown longterm effects [10] [11] [12] [13] [14] . Plant and herbal extracts are proven to have medicinal uses due to their constituents like polyphenols, flavonoids, and further classes of phytochemicals [15] [16] [17] . Such plant-based antimicrobial agents offer valuable solutions even against the notorious ESKAPE (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas

Iodine, Sage, and AV have been known remedies throughout the history of mankind. The combination of these three components in one formulation may render promising microbicides. Our previous investigations on "smart" triiodides and iodinated biomaterials confirm this hypothesis [31, 56, 72] . Such triiodides with pure halogen bonding are stable and only release molecular iodine when the biopolymer structure is deformed by electrostatic interactions with cell membranes of pathogens [31, 56, 61] . The UV-vis spectroscopic studies confirmed the availability of "smart" triiodides in our title compound. These biohybrids consist of readily available ingredients for most households. Our aim is to offer basic health care solutions for the public, which can be reproduced and utilized by everyone easily. We believe that nature based, simple formulations may be an answer to the increasing threat of antimicrobial resistance and health care emergencies like future pandemics. Sage and AV contain a spectrum of bioactive compounds, which include phenolic acids, polyphenols, anthraquinones and further phytochemicals [18, 19, [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] .

The antimicrobial activities of phenolic acids depend on their lipophilicity, number of hydroxyl-, ester-and methoxy-groups [23] . Hydroxyl-groups directly interact with the polar heads of the phospholipid components of cell membranes by hydrogen bonding and lead to membrane disruption by aggregation, reduced fluidity and increased rigidity [23] . The membrane disruption is accompanied by leakage of cell interiors and leads to cell death [23] . Phenolic acids like caffeic acid are lipohilic and pass through the cell membrane to the cytoplasm and acidify the cytosol [23] . Efflux pumps in bacterial strains can be disabled by phenolic acids [23] . Phenolic acids disrupt quorum-sensing communication and inhibit biofilm formation [15, 23] . Extraction methods are one of the key factors of preserving the needed antimicrobial biocompounds in plants like Sage and AV. Extraction temperature, solvents and methods directly impact the resulting bioactivity of the products and need to be employed accordingly [18] [19] [20] [21] [22] [23] [24] [25] [26] 35, 37, 45] .

Maceration of Sage plants with methanol for 72 h renders ferulic acid, followed by rosmarinic acid and the flavonoid apigenin [18, 25] . Aqueous, alcoholic extracts of Sage contain rosmarinic acid and luteolin-7-glucoside [19, 26] . The extraction methods decoction, infusion, soxleth, or methanol/water extraction result in trans-rosmarinic acid as the most abundant phenolic acid [24] [25] [26] . The main components of the ethanolic extract obtained by Boufadi et al. are the phenolic acids rosmarinic-, salvianolic-, ferulic-, caffeic-, carnosic-, cinnamic-and sagerinic acid in order of decreasing quantity [27] . The flavonoids and phytochemicals catechin, cirsimaritin, quercetin, luteolin, hesperidine, apigenin and thymol were also detected in the ethanolic Sage extract [27] . These results confirm that Sage is rich in important health-promoting phytochemicals. The composition is widely dependent on extraction methods, climate, soil, plant age and irrigation patterns [21] . As a general result, rosmarinic acid is available in all extractions mentioned in the literature. Further components are caffeic-and ferulic acid, as well as further phenolic acids and flavonoids in decreasing amounts. A recent study by Boufadi et al. describes the maceration of 80 g fresh Sage leaves in 100 mL of pure ethanol in a sealed glass bottle for 72 h in darkness [27] . The product was filtered and a rotary evaporator was employed at 40 • C to obtain the pure extract [27] . We extracted 100 mg fresh Sage in 100 mL pure ethanol during a maceration period of 30 days and expect similar composition. A recent review concluded a higher polyphenol content for harvesting Sage plants in summer, while winter harvest leads to higher flavonoid content [18] . Extraction with ethanol as a solvent at lower temperatures seems to be ideal for dried Sage leaves [18] . An increase in extraction temperature leads to evaporation of volatile components and lowers polyphenol content [18] . Longer extraction time resulted in an increase in carnosic components and rosmarinic acid [18] . Keeping these factors in mind, we chose ethanol as solvent and macerated the fresh Sage plants at ambient temperatures sealed in glass bottles for 30 days. Our analytical results confirmed the availability of the needed bioactive compounds and their antimicrobial activity against 10 pathogens.

Electron Microscope (SEM) and Energy-Dispersive X-ray Spectroscopic (EDS) Analysis SEM and EDS analysis were employed to investigate composition and morphology of AV-PVP-Sage-I 2 ( Figure 1 ). most abundant phenolic acid [24] [25] [26] . The main components of the ethanolic extract obtained by Boufadi et al. are the phenolic acids rosmarinic-, salvianolic-, ferulic-, caffeic-, carnosic-, cinnamic-and sagerinic acid in order of decreasing quantity [27] . The flavonoids and phytochemicals catechin, cirsimaritin, quercetin, luteolin, hesperidine, apigenin and thymol were also detected in the ethanolic Sage extract [27] . These results confirm that Sage is rich in important health-promoting phytochemicals. The composition is widely dependent on extraction methods, climate, soil, plant age and irrigation patterns [21] . As a general result, rosmarinic acid is available in all extractions mentioned in the literature. Further components are caffeic-and ferulic acid, as well as further phenolic acids and flavonoids in decreasing amounts. A recent study by Boufadi et al. describes the maceration of 80 g fresh Sage leaves in 100 mL of pure ethanol in a sealed glass bottle for 72 h in darkness [27] . The product was filtered and a rotary evaporator was employed at 40 °C to obtain the pure extract [27] . We extracted 100 mg fresh Sage in 100 mL pure ethanol during a maceration period of 30 days and expect similar composition. A recent review concluded a higher polyphenol content for harvesting Sage plants in summer, while winter harvest leads to higher flavonoid content [18] . Extraction with ethanol as a solvent at lower temperatures seems to be ideal for dried Sage leaves [18] . An increase in extraction temperature leads to evaporation of volatile components and lowers polyphenol content [18] . Longer extraction time resulted in an increase in carnosic components and rosmarinic acid [18] . Keeping these factors in mind, we chose ethanol as solvent and macerated the fresh Sage plants at ambient temperatures sealed in glass bottles for 30 days. Our analytical results confirmed the availability of the needed bioactive compounds and their antimicrobial activity against 10 pathogens.

Electron Microscope (SEM) and Energy-Dispersive X-ray Spectroscopic (EDS) Analysis SEM and EDS analysis were employed to investigate composition and morphology of AV-PVP-Sage-I2 ( Figure 1 ). AV-PVP-Sage-I2 shows a homogenous, amorphous pattern in the SEM analysis (Figure 1a) . Figure 1b reveals mainly carbon, followed by iodine, oxygen, chlorine, potassium and sodium in the sample. The last three atoms were also present in our previous compound AV-PVP-I2 [31] . This indicates similarities in composition and purity of the title compound [31] . The EDS reveals higher intensity peaks in the Sage complex between 0-5 keV, suggesting higher polyphenol content in AV-PVP-Sage-I2 due to additional Sage plant extracts (Figure 1b) . The samples were all coated with gold. AV-PVP-Sage-I 2 shows a homogenous, amorphous pattern in the SEM analysis ( Figure 1a ). Figure 1b reveals mainly carbon, followed by iodine, oxygen, chlorine, potassium and sodium in the sample. The last three atoms were also present in our previous compound AV-PVP-I 2 [31] . This indicates similarities in composition and purity of the title compound [31] . The EDS reveals higher intensity peaks in the Sage complex between 0-5 keV, suggesting higher polyphenol content in AV-PVP-Sage-I 2 due to additional Sage plant extracts (Figure 1b) . The samples were all coated with gold.

The adsorption of the biohybrid AV-PVP-Sage-I 2 on different medical tissues is relevant for its application as antimicrobial agent. We impregnated sutures with our title compound. The material was analyzed by SEM and EDS analysis to rectify the coating process, composition and morphology of the adsorbed AV-PVP-Sage-I 2 ( Figure 2 ).

The adsorption of the biohybrid AV-PVP-Sage-I2 on different medical tissues is relevant for its application as antimicrobial agent. We impregnated sutures with our title compound. The material was analyzed by SEM and EDS analysis to rectify the coating process, composition and morphology of the adsorbed AV-PVP-Sage-I2 ( Figure 2 ). The plain, braided surgical suture is shown in Figure 2a [31] . The suture in Figure 2b is coated by a thick, homogenous layer of AV-PVP-Sage-I2 (11 µg/mL). Figure 2c depicts the resulting EDS of the dip-coated suture. The biohybrid effectively coats the surgical suture and may enable its use in the prevention of surgical site infections.

The UV-vis spectrometric results are in agreement with previous studies (Figure 3 ) [31, 56, 72] . The plain, braided surgical suture is shown in Figure 2a [31] . The suture in Figure 2b is coated by a thick, homogenous layer of AV-PVP-Sage-I 2 (11 µg/mL). Figure 2c depicts the resulting EDS of the dip-coated suture. The biohybrid effectively coats the surgical suture and may enable its use in the prevention of surgical site infections.

The UV-vis spectrometric results are in agreement with previous studies ( Figure 3 ) [31, 56, 72] . composition and morphology of the adsorbed AV-PVP-Sage-I2 ( Figure 2 ). The plain, braided surgical suture is shown in Figure 2a [31] . The suture in Figure 2b is coated by a thick, homogenous layer of AV-PVP-Sage-I2 (11 µg/mL). Figure 2c depicts the resulting EDS of the dip-coated suture. The biohybrid effectively coats the surgical suture and may enable its use in the prevention of surgical site infections.

The UV-vis spectrometric results are in agreement with previous studies (Figure 3 ) [31, 56, 72] . The two biohybrids AV-PVP-Sage and AV-PVP-Sage-I2 absorb in the range between 200 to 450 nm ( Figure 3 ). The iodinated formulation is dominated by absorption peaks of smart triiodides at 291 and 359 nm in compliance with our previous investigations ( Figure  3a ,b) [31, 56, [59] [60] [61] [62] [63] 72] .

The fresh and three-day-old samples of AV-PVP-Sage-I2 absorb at shorter wavelengths ( Figure 3 ). This blue shift happens after iodination and implies removal of the chromophores and the conjugation system. Higher energy is needed to overcome the increased energy gap between the bonding and antibonding orbitals in the molecules absorbing between 215-255 nm. Iodine molecules seem to form halogen and hydrogen bonding with the available molecules in the formulation. Due to these interactions, conjugation systems, double bonds in C=C and carbonyl bonds are affected. These interactions lead to more encapsulation and coiling of the whole biomolecular structure, as well as a size decrease. The hypsochromic effect suggests better incorporation of biomolecules and iodine moieties into the PVP polymer backbone between 215-255 nm. I2-molecules show absorption peaks at 203, 227 and 460 nm [31] . The title formulation AV-PVP-Sage-I2 absorbs at 202, 205, 290 and 359 nm. According to previous reports, these absorption peaks originate from iodide ions (202 nm), molecular iodine (205 nm) and triiodide ions (290 and 359 nm) [31, 47, [52] [53] [54] [55] [56] [57] . We can infer the hydrolysis of iodine resulting in triiodide ions [74] . The triiodide ions form hydrogen bonds with the C=O groups of PVP [31] . This results in the formation of PVP-I3 − complexes within the biohybrid: The two biohybrids AV-PVP-Sage and AV-PVP-Sage-I 2 absorb in the range between 200 to 450 nm ( Figure 3 ). The iodinated formulation is dominated by absorption peaks of smart triiodides at 291 and 359 nm in compliance with our previous investigations (Figure 3a ,b) [31, 56, [59] [60] [61] [62] [63] 72] .

The fresh and three-day-old samples of AV-PVP-Sage-I 2 absorb at shorter wavelengths ( Figure 3 ). This blue shift happens after iodination and implies removal of the chromophores and the conjugation system. Higher energy is needed to overcome the increased energy gap between the bonding and antibonding orbitals in the molecules absorbing between 215-255 nm. Iodine molecules seem to form halogen and hydrogen bonding with the available molecules in the formulation. Due to these interactions, conjugation systems, double bonds in C=C and carbonyl bonds are affected. These interactions lead to more encapsulation and coiling of the whole biomolecular structure, as well as a size decrease. The hypsochromic effect suggests better incorporation of biomolecules and iodine moieties into the PVP polymer backbone between 215-255 nm. I 2 -molecules show absorption peaks at 203, 227 and 460 nm [31] . The title formulation AV-PVP-Sage-I 2 absorbs at 202, 205, 290 and 359 nm. According to previous reports, these absorption peaks originate from iodide ions (202 nm), molecular iodine (205 nm) and triiodide ions (290 and 359 nm) [31, 47, [52] [53] [54] [55] [56] [57] . We can infer the hydrolysis of iodine resulting in triiodide ions [74] . The triiodide ions form hydrogen bonds with the C=O groups of PVP [31] . This results in the formation of PVP-I 3 − complexes within the biohybrid: Table 1 ) [31, 47, [52] [53] [54] [55] [56] [57] . Such absorption maxima are indicating pure halogen bonding within smart triiodide units [31, 56, 61] . Smart triiodides proved to have increased antimicrobial activities [31, 56, 61] . Their exceptional stability enables a controlled release of molecular iodine from the triiodide units [31, 56, 61] . The release starts, when electrostatic interactions between the cell membrane of microorganisms lead to deformations of the complex, polymer compound [31, 56, 61] . The formula PVP-I 2 can be used interchangeably with PVP-I 3 − [31, 47, [64] [65] [66] [67] [68] [69] [70] [71] [72] . The UV-vis spectrum of AV-PVP-Sage-I 2 shows absorption peaks of molecular iodine at around 205 nm [31, 75, 76] . The broad absorption from 204-220 nm is due to iodine moieties within the structure of AV-PVP-Sage-I 2 ( Table 1) . Table 1 . UV-vis absorption signals in the samples AV-PVP-Sage (1), AV-PVP-Sage-I 2 (2), AV-PVP-I 2 (3), AV-PVP-I 2 -NaI (4) and previous reports (nm). Addition of iodine results in a hypsochromic effect due to encapsulation and complexation of the iodine in form of triiodide ions into the PVP polymer backbone. The coiling of PVP decreases the availability of π-electrons, the chromophores cannot absorb and hydrogen bonding is increased [74] .

After 30 min, the AV-PVP-Sage-I 2 sample exhibits decreased absorption intensities compared to the fresh sample in the region between 200-215 nm ( Figure 3a ). This confirms the encapsulation of the iodine moieties into the biocomplex by hydrogen bonding and reduced conjugation systems of the related plant phytochemicals. The incorporation of iodine, iodide ions and triiodide ions into the biopolymer leads to changes in the complex.

The spectroscopic analysis of AV-PVP-Sage-I 2 after 3 days reveals two different trends.

The region after 284 nm shows lower absorption in the three-day-old AV-PVP-Sage-I 2 sample compared to the same fresh sample (Figure 3b , Table 1 ). This result suggests the continued encapsulation of the triiodide moieties by hydrogen bonding through electrostatic attraction to the carbonyl groups of PVP according to Equation according to Equations (2) and (3). The release of iodine and iodide ions leads to formation of new triiodide ions in order to preserve the equilibrium and is witnessed by increased absorption intensities in the range between 200 to 283 nm ( Figure 3b ). The UV-vis spectrum shows also a bathochromic shift combined with the mentioned higher absorption intensities in the range between 200 to 283 nm ( Figure 3a , Table 1 ). Such circumstances suggest changes in the PVP structure from single bonded C-O back to C=O groups. Increasing availability of conjugated systems and chromophores can be expected due to Sage and AV compounds. This implies partial release of aloin, iodine and iodide ions from the PVP backbone ( Figure 3a , Table 1 ).

In conclusion, we can verify the continued incorporation of triiodide moieties into the complex AV-PVP-Sage-I 2 within a time frame of three days under storage in the fridge. This encapsulation of triiodide units into the biopolymer triggers a release of iodine and triiodide ions, as well as other AV-Sage phytochemicals during the process.

The UV-vis spectrum of AV-PVP-Sage shows strong, broad absorbance peaks with at λmax = 283 and 338 nm ( Figure 3 , Table 1 ). These two absorptions are related to Sage and AV phenolic compounds in agreement with previous reports [14, 20, 24, 31] . The spectroscopic analysis of AV, Sage and their encapsulation with PVP is provided in Figure 4 . Table 1 ). Such circumstances suggest changes in the PVP structure from single bonded C-O back to C=O groups. Increasing availability of conjugated systems and chromophores can be expected due to Sage and AV compounds. This implies partial release of aloin, iodine and iodide ions from the PVP backbone ( Figure 3a , Table 1 ).

In conclusion, we can verify the continued incorporation of triiodide moieties into the complex AV-PVP-Sage-I2 within a time frame of three days under storage in the fridge. This encapsulation of triiodide units into the biopolymer triggers a release of iodine and triiodide ions, as well as other AV-Sage phytochemicals during the process.

The UV-vis spectrum of AV-PVP-Sage shows strong, broad absorbance peaks with at λ-max = 283 and 338 nm ( Figure 3 , Table 1 ). These two absorptions are related to Sage and AV phenolic compounds in agreement with previous reports [14, 20, 24, 31] . The spectroscopic analysis of AV, Sage and their encapsulation with PVP is provided in Figure 4 . Aloin, aloe-emodin, aloesin, 10-O-β-d-glucopyranosyl-aloenin, rhein, pyrogallol and hesperidin reveal absorption peaks between 200-360 nm ( Figure 4a ) [31] . Aloin is showing strong absorbance intensities at 206, 268, 296 and 353 nm with accordance with our previous study on AV-PVP-biohybrids ( Figure 4a ) [31] . The bands of aloin are strong and overlap with the other AV components (Figure 4a ) [31] . The broad bands between 270-320 nm and 330-400 nm suggest the availability of more AV biomolecules ( Figure 4a ) [31] . These include aloe-emodin, which can be detected usually at 226, 257 and 285 nm [31] . Aloesin is available and can be confirmed by the absorptions at around 251, 296 and 360 nm (Figure 4a) [31] . Pyrogallol is confirmed by the absorption bands at around 280 and 349 nm ( Figure 4a ) [31] . Rhein absorbs at 329 and 295 nm and is available according to the UV-vis spectrum in Figure 4a [31] . The absorption peaks at 202 and 293 nm confirm the availability of 10-O-β-d-glucopyranosyl-aloenin in the AV sample ( Figure 4a ) [31] . Hesperidin exhibits an absorption signal at 329 nm in previous reports and can be detected here around 340 nm [31, 41] . After adding PVP into the AV sample, the absorption intensities decrease dramatically as seen in Figure 4b . All the AV biomolecules are encapsulated into the PVP backbone. The chromophores cannot absorb and are fixed by hydrogen bonding or new bonds between the PVP carbonyl groups and other entities within the AV biocomponents. The inset in Figure 4b illustrates that the absorption bands of the concerned biomolecules appear at the same wavelengths but extremely lower absorption intensities.

The Sage extract contains compounds, which absorb also in the same range of AV biomolecules [20, 24, 28] . The addition of PVP leads to incorporation of Sage biomolecules into the PVP polymer matrix verified by the hypochromic shift towards lower intensities ( Figure 4d ). The pure Sage sample reveals a high intensity absorption band around 200-230 nm, followed by a broad shoulder around 230-50 nm and another a broad band from 260 to 300 nm ( Figure 4c ). Lower intensity absorption bands appear finally at 310-480 nm and 400-450 nm (Figure 4c ). According to previous studies these bands can be assigned to Sage biomolecules [24, 28] . Aloin, aloe-emodin, aloesin, 10-O-β-d-glucopyranosyl-aloenin, rhein, pyrogallol and hesperidin reveal absorption peaks between 200-360 nm ( Figure 4a ) [31] . Aloin is showing strong absorbance intensities at 206, 268, 296 and 353 nm with accordance with our previous study on AV-PVP-biohybrids ( Figure 4a ) [31] . The bands of aloin are strong and overlap with the other AV components (Figure 4a ) [31] . The broad bands between 270-320 nm and 330-400 nm suggest the availability of more AV biomolecules ( Figure 4a ) [31] . These include aloe-emodin, which can be detected usually at 226, 257 and 285 nm [31] . Aloesin is available and can be confirmed by the absorptions at around 251, 296 and 360 nm ( Figure 4a ) [31] . Pyrogallol is confirmed by the absorption bands at around 280 and 349 nm ( Figure 4a ) [31] . Rhein absorbs at 329 and 295 nm and is available according to the UV-vis spectrum in Figure 4a [31] . The absorption peaks at 202 and 293 nm confirm the availability of 10-O-β-d-glucopyranosyl-aloenin in the AV sample ( Figure 4a ) [31] . Hesperidin exhibits an absorption signal at 329 nm in previous reports and can be detected here around 340 nm [31, 41] . After adding PVP into the AV sample, the absorption intensities decrease dramatically as seen in Figure 4b . All the AV biomolecules are encapsulated into the PVP backbone. The chromophores cannot absorb and are fixed by hydrogen bonding or new bonds between the PVP carbonyl groups and other entities within the AV biocomponents. The inset in Figure 4b illustrates that the absorption bands of the concerned biomolecules appear at the same wavelengths but extremely lower absorption intensities.

The Sage extract contains compounds, which absorb also in the same range of AV biomolecules [20, 24, 28] . The addition of PVP leads to incorporation of Sage biomolecules into the PVP polymer matrix verified by the hypochromic shift towards lower intensities ( Figure 4d) . The pure Sage sample reveals a high intensity absorption band around 200-230 nm, followed by a broad shoulder around 230-50 nm and another a broad band from 260 to 300 nm (Figure 4c ). Lower intensity absorption bands appear finally at 310-480 nm and 400-450 nm (Figure 4c ). According to previous studies these bands can be assigned to Sage biomolecules [24, 28] .

The peak at 283 nm in pure Sage ( Figure 4c ) and in the formulation AV-PVP-Sage ( Figure 3b ) is related to sagerinic acid and salvianolic acid B [24] . In previous reports, these two compounds show absorption signals at 284 and 284/340 nm, respectively. Rosmarinic acid shows absorptions peaks at 280 nm and 330 nm [28] . Another study reports caffeic acid and trans-rosmarinic acid absorptions at 328 nm, while sagecoumarin absorbs at 332 nm [24] . The same absorption peaks appear in our formulations, as well as in the pure Sage sample, thus confirming the presence of trans-rosmarinic and caffeic acid (Figure 3b , Figure 4c ). Boufadi et al. revealed in a recent publication the result of their ethanolic maceration extract [27] . Their extraction method is comparable to our method. We refrained from using heat in order to preserve all phytochemicals. They reported in their UV-vis analysis absorption signals at 270 nm for rosmarinic-, salvianolic-, ferulic-, caffeic-, carnosic-, cinnamic-and sagerinic acid in decreasing order [27] . They analyzed the sample at 320 nm and recorded the flavonoids and phytochemicals catechin, cirsimaritin, kaempferol, quercetin, luteolin, hesperidine, apigenin and thymol, among others [27] . Our compound AV-PVP-Sage reveals a peak at 331 nm, which proves the availability of sagecoumarin, caffeic acid and trans-rosmarinic acid in our extract (Figure 3b ). The same absorption bands appear in Figure 4c ,d.

AV-PVP-Sage exhibits generally lower absorbance intensity in comparison to AV-PVP-Sage-I 2 ( Figure 3 , Table 1 ). Higher absorbance intensity and a red shift are recorded exceptionally between the wavelengths of 215-255 nm ( Figure 3 ). As a result, there is higher availability of biomolecules consisting of chromophores with conjugated π-systems in this region. These are π-electrons from double bonds, aromatic ring systems or oxygen atoms with nonbonding orbitals originating from lone electron pairs. Such molecules in AV-PVP-Sage form less hydrogen bonding and therefore are less encapsulated between the wavelengths of 215-255 nm ( Figure 3 , Table 1 ). The related absorption wavelengths reveal PVP (221 nm), rhein (229), aloin (231 nm), aloesin (251 nm) and aloe-emodin (226 and 257 nm) as the reason for the combined bathochromic and hypsochromic shifts in the spectrum [31] .

The sample was sealed and kept for three days in the fridge in darkness. The threeday-old AV-PVP-Sage reveals absorption intensities around 200-240 nm higher than the fresh sample. Under these conditions, the related molecules increased the conjugation in their aromatic ring systems and changed C-O to C=O bonds. Hydrogen bonding within the older sample was reduced. These results suggest changes in the molecular structure of the associated molecules by breaking intramolecular covalent bonding and dipol-dipol attraction (hydrogen bonding). We explain this by the partial release of rhein, aloin, aloesin and aloe-emodin from the PVP-polymer backbone in the biohybrid AV-PVP-Sage. In the region after 284 nm, the three-day-old sample exhibits lower absorption intensities and therefore better incorporation of the biomolecules into the biopolymeric structure. The concerned phytochemicals are sagerinic acid (284 nm), salvianolic acid (282 and 331 nm), trans rosmarinic acid (328 nm) and sage coumarine (332 nm).

AV and Sage components cannot be observed in the absorption spectra of AV-PVP-Sage-I 2 due to the overlap with the strong bands of the triiodide ions at λ-max = 290 and 359 nm ( Figure 3 , Table 1 ). Addition of iodine leads to a hypochromic effect with lower absorbance for the peaks at 289 and 331 nm. The latter reveals stronger decrease in intensity and proves the encapsulation of the related Sage and AV components into the polymeric backbone. These compounds are caffeic acid, the caffeic acid trimer sagecoumarin, transrosmarinic acid and the AV related flavanone glycoside hesperidin.

AV-PVP-I 2 absorbs with high intensity at 222 nm [31] . Adding the Sage extract resulted in a blue shift indicating a successful incorporation of the Sage extract into the polymer. This has an impact on the polymer backbone mobility by influencing local structures and is confirmed in the further spectroscopic analysis of the Sage samples. The Sage extract has strong interactions with the polymeric structure and reduces free movement of the CH groups. PVP chains are no more able to move freely due to Sage phenolic compounds [74] . Absorption peaks related to AV cannot be assigned clearly due to the strong overlap.

In conclusion, the presence of the AV biomolecules aloin, aloe-emodin, aloesin, 10-O-βd-glucopyranosyl-aloenin, rhein, pyrogallol and hesperidin within both title compounds is confirmed (Figures 3 and 4) [31] . The Sage components trans-rosmarinic-, salvianolic-, ferulic-, caffeic-and sagerinic acid, as well as sagecoumarin and hesperidin are also available in our two formulations (Figures 3 and 4 ).

Raman spectroscopic analysis of AV-PVP-Sage-I 2 is shown in (Figure 5 ). of the CH groups. PVP chains are no more able to move freely due to Sage phenolic compounds [74] . Absorption peaks related to AV cannot be assigned clearly due to the strong overlap.

In conclusion, the presence of the AV biomolecules aloin, aloe-emodin, aloesin, 10-O-β-d-glucopyranosyl-aloenin, rhein, pyrogallol and hesperidin within both title compounds is confirmed (Figures 3 and 4) [31] . The Sage components trans-rosmarinic-, salvianolic-, ferulic-, caffeic-and sagerinic acid, as well as sagecoumarin and hesperidin are also available in our two formulations (Figures 3 and 4 ).

Raman spectroscopic analysis of AV-PVP-Sage-I2 is shown in (Figure 5 ). The Raman spectrum reveals several high intensity peaks in the range between 100 to 400 cm −1 . The highest peak is due to symmetrical vibration ν1s within I3 − units at 110 cm −1 (Figure 4 ). The medium-sized peak of the vibrational stretching mode ν3s at 144 cm −1 is accompanied by the weak and very weak asymmetric stretching modes νas at 222 and 334 cm −1 , respectively ( Figure 5 , Table 2 ). The first can be considered an overtone of the I3 − band [77] . The triiodide moieties clearly dominate the absorption pattern in the spectrum ( Figure 5 , Table 2 ). The Raman spectrum reveals several high intensity peaks in the range between 100 to 400 cm −1 . The highest peak is due to symmetrical vibration ν 1s within I 3 − units at 110 cm −1 (Figure 4 ). The medium-sized peak of the vibrational stretching mode ν 3s at 144 cm −1 is accompanied by the weak and very weak asymmetric stretching modes ν as at 222 and 334 cm −1 , respectively ( Figure 5 , Table 2 ). The first can be considered an overtone of the I 3 − band [77] . The triiodide moieties clearly dominate the absorption pattern in the spectrum ( Figure 5 , Table 2 ). Triiodide bending vibration modes ν 2 in form of very weak shoulders are available at 61 and 70 cm −1 [77] . The latter can be considered a hot band transition related to ν 2 [77] .

Iodine units show a very weak shoulder and a strong peak at 80 and 169 cm −1 , respectively ( Figure 5 , Table 2 ) [77] . The first peak at 80 cm −1 is related to stretching vibrations in I 2 ····I − units [77] . The strong absorption signal at 169 cm −1 originates from I . . . I stretching vibrations, which are connected to a nearby I − ion in form I . . . I····I − [77] . The presence of the Raman active vibrational modes at 61, 85 and 169 cm −1 is due to nonlinearity within the triiodide ion. The triiodide units in AV-PVP-Sage-I 2 are verified here as unsymmetric and slightly non-linear in their free form before complexation (equation 1 and 4) [77] . The very weak absorbance by iodine moieties in the UV-vis spectroscopic analysis confirms the same results ( Figure 5 , Table 2 ). Pentaiodide units are not available in our title compound because they usually appear around 137 to 147 cm −1 and 167 cm −1 [59, 78, 79] . Free iodine absorbs usually at 172 cm −1 , but is not available in free form in our biohybrid AV-PVP-Sage-I 2 ( Figure 5 , Table 2 ) [53, 59, 80, 81] .

The phenolic acids caffeic acid, rosmarinic acid, ferrulic acid and vanillic acid are major components in the ethanolic Sage extracts [18] . AV contains cinnamic acid and acemannan next to other important phytochemicals [31] . The carboxylic acid absorptions of these plant components are necessarily part of the biohybrid AV-PVP-Sage-I 2 [31] . The availability of these compounds are confirmed in the Raman spectrum by their weak asymmetric and very weak symmetric stretching -COOH absorptions at 1577 and 1457 cm −1 , respectively [82] . Hydroxyl-groups show weak, broad bands at 3000 to 3600 cm −1 extracts [82] . In our Raman spectrum, these bands appear at lower wavelengths with very low intensity (2850 to 3000 cm −1 ) (Supplementary File S1-Raman full). The weak band at 2942 cm −1 and the very weak band at 2939 cm −1 can be assigned to OH-and asymmetric CH 2 -stretching modes, respectively. The OH-bands show a red shift to lower wavelengths in AV-PVP-Sage-I 2 compared to pure AV. The OH-stretching modes in our compound contain weaker C-OH bonds than in pure AV due to encapsulation and hydrogen bonding. The acetylation degree of the carboxyl groups in acemannan is usually evident with the absorption 1740 cm −1 [31] . Very weak asymmetric and symmetric C=O stretching bands of the carboxyl groups appear at 1708 and 1457 cm −1 in our title compounds, respectively (Supplementary File S1-Raman full). O-C-O stretching vibrations are available at 1664 cm −1 (Supplementary File S1-Raman full). Acemannan acetyl groups show very weak O-C-O absorptions at 1232 cm −1 (Supplementary File S1-Raman full) [31] . Glucoside units H-C-O-H within acemannan absorb at 1232 cm −1 (Supplementary File S1-Raman full) [31] .

The weak absorption of these groups is overshadowed by the strong absorption of the iodide moieties within AV-PVP-Sage-I 2 and makes further clarifications impossible.

The FTIR analysis of the two samples confirmed the expected composition and mechanisms of complexation during the addition of molecular iodine ( Figure 6 , Supplementary File S2).

The analysis reveals the same pattern like in our previous investigation of the AV-PVP-I 2 biohybrid ( Figure 5 ) [31] . The compounds AV-PVP-Sage and AV-PVP-Sage-I 2 absorb at the same wavelengths (Figure 6a,b) .

The FTIR analysis of the two samples confirmed the expected composition and mechanisms of complexation during the addition of molecular iodine ( Figure 6 , Supplementary File S2).

The analysis reveals the same pattern like in our previous investigation of the AV-PVP-I2 biohybrid ( Figure 5 ) [31] . The compounds AV-PVP-Sage and AV-PVP-Sage-I2 absorb at the same wavelengths (Figure 6a,b) . AV-PVP-Sage-I2 shows slightly higher peak intensities than AV-PVP-Sage in the absorption spectrum (Figure 6a,b ). An increase in absorbance is seen for -COOH (3228.84 cm −1 ), -C=O (3000, 1680, 1649.14 and 1641.42 cm −1 ), -CH/-CH2/-CH3 (2937.59, 2900.94 cm −1 ), and C-O (1049.28 cm −1 ) groups (Figure 6a,b) . This indicates higher availability of chromophores, higher absorption of functional groups and less hydrogen bonding. The encapsulation of the chromophores with above functional groups decreases by reduced hydrogen bonding in the iodinated compound [31] .

During the iodination, the molecular iodine is reduced to iodide by the phytochemicals within AV and Sage [20] . The hydroxyl-functional groups of the latter undergo oxidation to carbonyl-groups. The phenolic acids and phytochemicals, which were encapsulated into the PVP matrix are partly released due to the addition of iodine into the formulation. Iodine is reduced to iodide ions, forms triiodide ions according to Equation (4), which partly replace the encapsulated larger phytochemicals in the PVP matrix in form of smart triiodides. These triiodide ions form hydrogen bonding to the C-O bonds in the PVP. The detached phenolic acids and polyphenols result in elevated numbers of functional groups -COOH, -OH, -C=O and -C-O. These lead to the above-mentioned higher absorption intensities in the iodinated formulation. At the same time, reduction of iodine molecules possibly triggers oxidation of hydroxyl groups to -C=O within phenolic acids and other phytochemicals originating from AV-Sage. This would explain the increase in absorption intensities for carbonyl groups. In the UV-vis spectrum, the triiodide ion absorption overshadows the weaker bands of AV and Sage biomolecules and prevents exact conclusions about their whereabouts. AV-PVP-Sage-I 2 shows slightly higher peak intensities than AV-PVP-Sage in the absorption spectrum (Figure 6a,b ). An increase in absorbance is seen for -COOH (3228.84 cm −1 ), -C=O (3000, 1680, 1649.14 and 1641.42 cm −1 ), -CH/-CH 2 /-CH 3 (2937.59, 2900.94 cm −1 ), and C-O (1049.28 cm −1 ) groups (Figure 6a,b) . This indicates higher availability of chromophores, higher absorption of functional groups and less hydrogen bonding. The encapsulation of the chromophores with above functional groups decreases by reduced hydrogen bonding in the iodinated compound [31] .

During the iodination, the molecular iodine is reduced to iodide by the phytochemicals within AV and Sage [20] . The hydroxyl-functional groups of the latter undergo oxidation to carbonyl-groups. The phenolic acids and phytochemicals, which were encapsulated into the PVP matrix are partly released due to the addition of iodine into the formulation. Iodine is reduced to iodide ions, forms triiodide ions according to Equation (4) , which partly replace the encapsulated larger phytochemicals in the PVP matrix in form of smart triiodides. These triiodide ions form hydrogen bonding to the C-O bonds in the PVP. The detached phenolic acids and polyphenols result in elevated numbers of functional groups -COOH, -OH, -C=O and -C-O. These lead to the above-mentioned higher absorption intensities in the iodinated formulation. At the same time, reduction of iodine molecules possibly triggers oxidation of hydroxyl groups to -C=O within phenolic acids and other phytochemicals originating from AV-Sage. This would explain the increase in absorption intensities for carbonyl groups. In the UV-vis spectrum, the triiodide ion absorption overshadows the weaker bands of AV and Sage biomolecules and prevents exact conclusions about their whereabouts.

The absorption band in the range between 3000 and 3600 cm −1 is higher and broader in our title compounds compared to pure PVP [31, 74, 83] . Both biohybrids contain phytochemicals with -OH and -COOH groups originating from AV and Sage extracts ( Figure 6 ) [31, 84] .

The stretching vibration of -C=O groups in PVPI appears at 1650 cm −1 as a strong sharp peak (Supplementary File S2, Supplementary File Table S1 ). The FTIR spectra of our title compounds also show strong, broad absorptions with high peak intensities between 1800-1400 cm −1 (Figure 6 ). Similar broad bands are available in the FTIR spectrum of AV (Supplementary File S3, Supplementary File Table S1 ). The increased, broadened absorption bands are due to dipol-dipol interactions between PVP carbonyl groups, AV-PVP biomolecules and iodine moieties.

Methylene groups in pure PVP absorb in the region around 2700-2900 cm −1 were higher than in our compounds [31, 74, 83] . CH 2 -CH 2 and C-C bond vibrations with smaller absorption intensities combined with a slight red shift surface after AV-PVP-Sage (887.26 cm −1 , Figure 6a ) was iodinated (885.33 cm −1 in Figure 6b ). The red shift is an indicator for the weakening of the C-C bonds due to increased encapsulation of triiodide ions and the subsequent, partial release of AV-Sage biomolecules. At the same time, the absorption intensities at 1680, 1649.14 and 1641.42 cm −1 increase slightly after iodination of AV-PVP-Sage ( Figure 6 ).

The absorption bands around 2940 and 2140 cm −1 originate from CH 2 -deformation and C=O combination vibration within PVP, respectively ( Figure 6 ). Acemannan and pure PVP have absorption peaks at 2950 and 2922 cm −1 for asymmetric and symmetric stretching vibrations of CH 2 chains, respectively [31, 74] . The two title compounds AV-PVP-Sage and AV-PVP-Sage-I 2 absorb with high intensity at 2945.30/2902.87 cm −1 and 2937.59/2900.94 cm −1 , respectively ( Figure 6, Supplementary File S2) . The peaks of AV-PVP-Sage-I 2 have slightly higher intensity and are absorbing at lower frequency. The iodination resulted in this region with more encapsulation of triiodides into the PVP and the release of the larger acemannan molecules. Other large entities originating from the plant biomolecules are also partly released due to iodination. Similarly, the large carbohydrates monopyranose, pyranose and mannose are replaced by iodine, which is verified by the absorption increase at 1049.28 cm −1 after iodination (Figure 6b ). Absorption intensities increase due to their reduced deformation or participation in the complex reaction with polyiodide ions [20] .

In conclusion, C-C bonds characterized by methylene-, methyl-and -CH 2 stretchings show increased absorption signal intensities. This signifies less encapsulation and less deformation of C-C entities.

The Sage extract also interacts with the polymer strongly by reducing the free movement of the CH groups [74] . The PVP chains are not more able to move freely due to the phytochemicals in Sage and AV (Supplementary File S3) [74] . In our title compounds, very strong stretching modes of -COOH and -COOindicate reduced hydrogen bonding character within our two biohybrids compared to pure PVP. The broad bands around 3230 cm −1 are due to the -COOH groups within the AV and Sage compounds ( Figure 6 , Supplementary File S3,). AV contains acemannan and cinnamic acid [74] . The main components in alcoholic Sage extracts obtained by the maceration method are phenolic acids and flavonoids [18, 19] . Phenolic acids are mainly ferulic acid, rosmarinic acid and caffeic acid [18] . The presence of all these compounds is authenticated in the FTIR absorption spectrum in both title compounds by the bands around 3224, 1649, 1680, 1481, 1460, 1385, 1325, 1275, 1087 and 1053 cm −1 (Figure 6 , Supplementary File S2). Acemannan acetylation degree is confirmed by the bands at 1680 and 1275 cm −1 (Figure 6 , Supplementary File S3) [31] . The presence of acemannan is further validated by the H-C-OH stretching vibration of glycosidic groups and the O-C-O acetyl stretching around 1385 and 1275 cm −1 , respectively ( Figure 6 , Supplementary File S2) [31] . The symmetric (1420 cm −1 ) stretching mode of carboxylates verify hydrogen bonding between carboxylate group and I 3 anions ( Figure 6 , Supplementary File S3). This results in higher coordination between the polymeric material and changes intramolecular ordering patterns of the PVP polymer backbone structure [78] . The medium sized band at 1088 cm −1 is due to the secondary alcoholic groups and the C-O stretching ester groups in the AV and Sage compounds ( Figure 6 , Supplementary File S3). The peak at 887 cm −1 refers to aromatic ring CH-CH stretching vibrations present in AV and Sage extracts and CH 2 -bending deformations in the PVP alkyl chain (Figure 6 , Supplementary File S3).

The bands between 1500 and 1200 cm −1 are very weak compared to pure PVP. The latter has CH deformation vibrations at 1373 cm −1 and CH 2 wagging, as well as C-N stretching vibrations at 1286 cm −1 [74] . These absorptions are also significantly decreased in our two Sage complexes ( Figure 6, Supplementary File S2) . The C-C and CH 2 rocking appear at 1017 cm −1 for pure PVP. In our title compounds, these are represented by absorption peaks around 1017 cm −1 (Figure 6, Supplementary File S2) .

Compared to AV-PVP-I 2 , and pure AV, our title compounds show higher absorption bands around 2900-3700 cm −1 , 1600 and 1000 cm −1 (Figure 6, Supplementary File S3) . Hydrogen bonding and triiodide moieties bridge between the PVP backbone and the polyphenols. This reduces the free movement of the PVP and the acemannan chains. This leads to a partial release of AV and Sage biomolecules verified by increased absorption intensities of free -COOH, -OH and phenolic groups. The increase in hydrogen bonding is also confirmed in the broadening and increase of absorption in the range between 3000-3600 cm −1 (Figure 6, Supplementary File S3) . The biocomplex AV-PVP-Sage-I 2 is a tightly packed, amorphous polymer.

The biohybrid AV-PVP-Sage-I 2 shows two main broad peaks in the XRD spectrum at 2θ = 14 • and 27 • (Figure 7) .

The bands between 1500 and 1200 cm −1 are very weak compared to pure PVP. The latter has CH deformation vibrations at 1373 cm −1 and CH2 wagging, as well as C-N stretching vibrations at 1286 cm −1 [74] . These absorptions are also significantly decreased in our two Sage complexes ( Figure 6, Supplementary File S2) . The C-C and CH2 rocking appear at 1017 cm −1 for pure PVP. In our title compounds, these are represented by absorption peaks around 1017 cm −1 (Figure 6, Supplementary File S2) .

Compared to AV-PVP-I2, and pure AV, our title compounds show higher absorption bands around 2900-3700 cm −1 , 1600 and 1000 cm −1 (Figure 6, Supplementary File S3) . Hydrogen bonding and triiodide moieties bridge between the PVP backbone and the polyphenols. This reduces the free movement of the PVP and the acemannan chains. This leads to a partial release of AV and Sage biomolecules verified by increased absorption intensities of free -COOH, -OH and phenolic groups. The increase in hydrogen bonding is also confirmed in the broadening and increase of absorption in the range between 3000-3600 cm −1 (Figure 6, Supplementary File S3) . The biocomplex AV-PVP-Sage-I2 is a tightly packed, amorphous polymer.

The biohybrid AV-PVP-Sage-I2 shows two main broad peaks in the XRD spectrum at 2θ = 14° and 27° (Figure 7 ). The broad band from 2θ = 20°-35° is due to strong presence of Sage [14] . The peak at 14° is related to AV and is in agreement with our previous studies of AV-PVP biohybrids [31] . The shoulder at 12.5° corroborates PVP (Figure 7) . Two peaks also appear in the XRD analysis of AV-PVP-I2 at 2θ = 10° and 19° [31] . Rahma et al. studied the XRD of pure PVP and reported broad peaks at 2θ = 12° and 20°, indicating amorphous phases (Table 3 ) [74] . AV demonstrates crystalline behavior in previous studies [31, [85] [86] [87] . The XRD analysis of AV-PVP-Sage-I2 suggests semicrystalline morphology with amorphous phases. The broad band from 2θ = 20 • -35 • is due to strong presence of Sage [14] . The peak at 14 • is related to AV and is in agreement with our previous studies of AV-PVP biohybrids [31] . The shoulder at 12.5 • corroborates PVP (Figure 7) . Two peaks also appear in the XRD analysis of AV-PVP-I 2 at 2θ = 10 • and 19 • [31] . Rahma et al. studied the XRD of pure PVP and reported broad peaks at 2θ = 12 • and 20 • , indicating amorphous phases (Table 3 ) [74] . AV demonstrates crystalline behavior in previous studies [31, [85] [86] [87] . The XRD analysis of AV-PVP-Sage-I 2 suggests semicrystalline morphology with amorphous phases. Table 3 . XRD analysis of the samples AV-PVP-Sage-I 2 (1), AV-PVP-I 2 (2) [31] , AV-PVP-I 2 -NaI (3) [31] and in previous reports (2Theta o ). [82] . After complexing AV and iodine with PVP, the peaks appear with lower intensity and a shift to 10 • and 19 • in AV-PVP-I 2 [31] . The decrease in intensity confirms the deposition of iodine moieties on the PVP in form of triiodide anions [31, 78] . When the Sage extract is added, the intensities further decrease, accompanied by a shift to 2Theta 14 o and 28 o (Figure 6 , Table 3 ). The decreased peak intensities, together with the shift to higher 2Theta values and the broadening indicate stronger encapsulation of the AV and Sage phytochemicals by the polymeric PVP backbone in AV-PVP-Sage-I 2 ( Figure 6 , Table 3 ). The broadened peaks at 28 • and 42 • verify encapsulation of iodine moieties by the polymer. The broadening of the peaks are due to overlap with the iodine diffraction peaks [79] . The same peaks were available in the XRD of our previously studied compound AV-PVP-I 2 -NaI at 28 • The XRD analysis confirms the purity of AV-PVP-Sage-I 2 due to missing of other phases (Figure 7 , Table 3 ).

The antimicrobial properties of our two title compounds were determined by disc diffusion assay against 10 microorganisms. The tested Gram-positive strains were S. pneumonia ATCC 49619, S. aureus ATCC 25923, S. pyogenes ATCC 19615, E. faecalis ATCC 29212 and B. subtilis WDCM0003. The utilized Gram-negative bacteria were E. coli WDCM 00013 Vitroids, P. mirabilis ATCC 29906, P. aeruginosa WDCM 00026 Vitroids and K. pneumonia WDCM00097 Vitroids. The fungus C. albicans WDCM 00054 Vitroids was also tested against our biocompounds. Gentamicin was used as positive control antibiotics in comparison to the antimicrobial activity of AV-PVP-Sage and AV-PVP-Sage-I 2 . The negative controls ethanol and water showed no zone of inhibition (ZOI) and were not mentioned in the following Table 4 . Table 4 . Antimicrobial testing of antibiotics (A), AV-PVP-Sage-I 2 by disc dilution studies (1,2,3) and suture (S). ZOI (mm) against microbial strains by diffusion assay. The fungal reference strain C. albicans WDCM 00054 is much stronger inhibited by our biohybrid AV-PVP-Sage-I 2 (ZOI = 52, 11 µg/mL) than the antibiotic nystatin (ZOI = 16) and AV-PVP-I 2 (ZOI = 20, 25 µg/mL) ( Table 4 , Figure 8a ) [31] . Table 4 . Antimicrobial testing of antibiotics (A), AV-PVP-Sage-I2 by disc dilution studies (1, 2, 3) and suture (S). ZOI (mm) against microbial strains by diffusion assay. [21] . They reported a ZOI of 19 mm for the same S. aureus reference strain used in our study [21] . The susceptibility of S. pneumoniae ATCC 49619 and S. pyogenes ATCC 19615 towards AV-PVP-Sage-I2 is the same (ZOI = 14 mm) at the concentration of 11 µg/mL. The results of Brezoiu et al. with the same reference strains of S. pneumoniae and S. pyogenes exhibit inhibitions zones of 14 mm [21] . Our results appear in the same range without embedding into nanoparticles and at a lower concentration due to adding iodine [21] . AV-PVP-I2 inhibited these two Gram-positive microorganisms at a higher concentration of 25 µg/mL with by ZOI = 12 and 10 mm, respectively [31] . The spore forming microorganism B. subtilis WDCM 0003 is intermediately inhibited with ZOI = 13 mm by AV- [21] . They reported a ZOI of 19 mm for the same S. aureus reference strain used in our study [21] . The susceptibility of S. pneumoniae ATCC 49619 and S. pyogenes ATCC 19615 towards AV-PVP-Sage-I 2 is the same (ZOI = 14 mm) at the concentration of 11 µg/mL. The results of Brezoiu et al. with the same reference strains of S. pneumoniae and S. pyogenes exhibit inhibitions zones of 14 mm [21] . Our results appear in the same range without embedding into nanoparticles and at a lower concentration due to adding iodine [21] . AV-PVP-I 2 inhibited these two Gram-positive microorganisms at a higher concentration of 25 µg/mL with by ZOI = 12 and 10 mm, respectively [31] . The spore forming microorganism B. subtilis WDCM 0003 is intermediately inhibited with ZOI = 13 mm by AV-PVP-Sage-I 2 . In comparison, AV-PVP-I 2 achieved 17 mm inhibition zone with a concentration of 25 µg/mL [31] . The Gram-negative bacteria K. pneumoniae WDCM 00097 ( Figure 8c ) and E. coli WDCM 00013 show inhibition zones of 13 and 11 mm, respectively ( Table 4 ). The same two Gram-positive pathogens exhibited ZOI of 14 and 13 mm towards AV-PVP-I 2 at the higher concentration of 25 µg/mL [31] . A recent study mentions supercritical fluid extraction of Sage leaves and determination of antibacterial activities against clinical strains [89] . The Sage extract inhibited B. subtilis, S. aureus, P. aeruginosa and E. coli in descending order [89] . The authors suggest, that the antimicrobial compounds in their extract are mainly carnosic acid, rosmanol, ferruginol, rosmarinic acid and salvianolic acid [89] . Our biomaterial shows also stronger biocidal effects against Gram-positive bacteria compared to Gram-negative bacteria. This is an indicator for the availability of the compounds carnosic acid, rosmanol, ferruginol, rosmarinic acid and salvianolic acid [22] . Another study reveals low inhibition of 4 different C. albicans strains by the dried Sage leaves extracts of methanol/water, aqueous infusion and decoction methods [24] . C. albicans WDCM 00054 shows high susceptibility towards our title compound obtained by ethanolic maceration and addition of iodine.

In conclusion, all the studied microorganisms are susceptible towards our biomaterial AV-PVP-Sage-I 2 except the two motile Gram-negative bacteria P. mirabilis ATCC 29906 and P. aeruginosa WDCM 00026. AV-PVP-Sage-I 2 has higher antimicrobial activity at a lower concentration of 17 µg/mL compared to AV-PVP-I 2 has with 25 µg/mL [31] . The addition of the Sage extract increased the inhibitory effect of the biohybrid at even lower concentrations of iodine. P. aeruginosa has multi-drug resistant efflux pumps for its defence against antibacterial agents and removes toxic substances out of the bacterial cell [23] . It was resistant against both title compounds, which contain phenolic acids. According to the UV-vis analysis, phenolic acids are available in Sage extracts in the form of sagecoumarin, trans-rosmarinic-, caffeic-, sagerinic-and salvianolic acid B [23] [24] [25] . AV contains only contains salicylic acid and cinnamic acid [31] . These phenolic acids in our two biocomplexes could not inhibit P. aeruginosa by disabling its efflux pumps.

AV-PVP-Sage-I 2 is a strong antifungal agent against C. albicans. The Gram-positive bacteria S. aureus is the strongest inhibited strain. The title compound displays intermediate antibacterial activity against the Gram-negative microorganisms K. pneumoniae WDCM 00097 and E. coli WDCM 00013 (Table 4, Figure 8c ).

We impregnated braided surgical sutures with AV-PVP-Sage-I 2 and performed antimicrobial test on the same 10 reference strains (Figure 9 ). PVP-Sage-I2. In comparison, AV-PVP-I2 achieved 17 mm inhibition zone with a concentration of 25 µg/mL [31] . The Gram-negative bacteria K. pneumoniae WDCM 00097 ( Figure  8c ) and E. coli WDCM 00013 show inhibition zones of 13 and 11 mm, respectively ( Table  4 ). The same two Gram-positive pathogens exhibited ZOI of 14 and 13 mm towards AV-PVP-I2 at the higher concentration of 25 µg/mL [31] . A recent study mentions supercritical fluid extraction of Sage leaves and determination of antibacterial activities against clinical strains [89] . The Sage extract inhibited B. subtilis, S. aureus, P. aeruginosa and E. coli in descending order [89] . The authors suggest, that the antimicrobial compounds in their extract are mainly carnosic acid, rosmanol, ferruginol, rosmarinic acid and salvianolic acid [89] . Our biomaterial shows also stronger biocidal effects against Gram-positive bacteria compared to Gram-negative bacteria. This is an indicator for the availability of the compounds carnosic acid, rosmanol, ferruginol, rosmarinic acid and salvianolic acid [22] . Another study reveals low inhibition of 4 different C. albicans strains by the dried Sage leaves extracts of methanol/water, aqueous infusion and decoction methods [24] . C. albicans WDCM 00054 shows high susceptibility towards our title compound obtained by ethanolic maceration and addition of iodine.

In conclusion, all the studied microorganisms are susceptible towards our biomaterial AV-PVP-Sage-I2 except the two motile Gram-negative bacteria P. mirabilis ATCC 29906 and P. aeruginosa WDCM 00026. AV-PVP-Sage-I2 has higher antimicrobial activity at a lower concentration of 17 µg/mL compared to AV-PVP-I2 has with 25 µg/mL [31] . The addition of the Sage extract increased the inhibitory effect of the biohybrid at even lower concentrations of iodine. P. aeruginosa has multi-drug resistant efflux pumps for its defence against antibacterial agents and removes toxic substances out of the bacterial cell [23] . It was resistant against both title compounds, which contain phenolic acids. According to the UV-vis analysis, phenolic acids are available in Sage extracts in the form of sagecoumarin, trans-rosmarinic-, caffeic-, sagerinic-and salvianolic acid B [23] [24] [25] . AV contains only contains salicylic acid and cinnamic acid [31] . These phenolic acids in our two biocomplexes could not inhibit P. aeruginosa by disabling its efflux pumps.

AV-PVP-Sage-I2 is a strong antifungal agent against C. albicans. The Gram-positive bacteria S. aureus is the strongest inhibited strain. The title compound displays intermediate antibacterial activity against the Gram-negative microorganisms K. pneumoniae WDCM 00097 and E. coli WDCM 00013 (Table 4, Figure 8c ).

We impregnated braided surgical sutures with AV-PVP-Sage-I2 and performed antimicrobial test on the same 10 reference strains (Figure 9 ). The antimicrobial studies of dip-coated sutures with the iodinated title compound exhibited the same trends like the disc diffusion studies. The fungus C. albicans showed The antimicrobial studies of dip-coated sutures with the iodinated title compound exhibited the same trends like the disc diffusion studies. The fungus C. albicans showed the strongest susceptibility, followed by the Gram-positive pathogens S. aureus, S. pneumonia, B. subtilis, E. faecalis, and S.pyogenes (Figure 9 , Table 4 ). The two Gram-negative bacteria K. pneumonia and E. coli were inhibited, while P. mirabilis and P. aeruginosa were resistant.

The inhibitory effects of the biohybrid AV-PVP-Sage-I 2 exhibit an interesting pattern. The fungus is most susceptible to the title compound, followed by strong to intermediate inhibitory effects on Gram-positive and Gram-negative pathogens ( Table 4 ). The multi-drug resistant species P. aeruginosa WDCM 00026 and the highly motile swarmer P. mirabilis ATCC 29906 with multiple flaggellae are resistant against AV-PVP-Sage-I 2 . The bacterial morphology is related to the susceptibility against our compound. The highest antimicrobial action is exhibited against round cocci, followed by rod shaped bacilli. Nonmotile species are more vulnerable than motile bacteria. The higher the agglomeration, the higher is the susceptibility against our title compound. The Gram-positive species forming clusters (S. aureus), chains (E. faecalis, S. pyogenes) and pairs (S. pneumoniae) are more inhibited than single, motile Gram-negative microorganisms ( Table 4 ). The most susceptible organism is C. albicans with a less complicated cell membrane, followed by Gram-positive bacteria. Both groups of pathogens have less negatively charged outer cell membranes than the highly negatively charged Gram-negative bacteria [18, 23, 31] . The latter have a complicated outer cell membrane compared to the two former [18, 23, 31] . Gram-positive pathogens have a thick peptidoglycan layer crosslinked by peptides [18, 23, 31] . The negatively charged peptidoglycan layer has inclusions called teichoic acid and lipoteichoic acid [31] . These inclusions and the crosslinking peptides contain partial negatively charged oxygen atoms [31] . These form dipol-dipol and electrostatic interactions with the AV and Sage phytochemicals. Such interactions decoil the encapsulating PVP polymeric backbone resulting in deformation and release of iodine molecules. Iodine molecules subsequently destabilize the outer membranes by iodination of the cell wall components which leads to cell membrane destruction and cell leakage [18, 23, 31] . Iodine molecules diffuse through the membranes into and inhibit all the important processes from within resulting in cell death [31] .

Iodine (≥ 99.0%), polyvinylpyrrolidone (PVP-K- 30 3-0, Metric:2, 19 mm, DC3K19) were purchased from General Medical Disposable (GMD), GMD Group A.S., Istanbul, Turkey. Sterile filter paper discs with a diameter of 6 mm were purchased from Himedia (Jaitala Nagpur, Maharashtra, India). Aloe vera leaves (Aloe barbadensis Miller, AV) were harvested from the botanical garden of Ajman University campus, Ajman, UAE. Ultrapure water was utilized. All reagents were of analytical grade and used as delivered.

We harvested the leaves of an Aloe vera (Aloe barbadensis Miller) plant in the first week of December 2020, between 8:45-9:15 am, from the botanical garden of Ajman University. The 3-year-old plant was growing under the shade of the trees and was immediately carried to the nearby research laboratory of the College of Pharmacy and Health Sciences. The AV leaves were between 36 to 51 cm long. They were washed with distilled water to remove sand, then rinsed once with pure ethanol, several times with ultrapure water, and finally dried carefully. We sliced the AV leaves with a sterile knife and scrapped the gel out into a blender. The mucilaginous, pure gel was stirred for 20 min at maximum speed and then centrifuged at 4000 rpm for 40 min (3K 30; Sigma Laborzentrifugen GmbH, Osterode am Harz, Germany). The light-yellow supernatant was stored in a sealed brown bottle in darkness at 3 • C for further use.

Fresh Sage plants from Lebanon were purchased in December from the local store, washed several times with distilled water and then twice with absolute ethanol. 100 mg of fresh Sage plant was cut in pieces and placed into a sterile glas bottle. 100 mL absolute ethanol was added and the glas bottle was sealed. The maceration process lasted for 30 days at ambient temperatures with 4 times daily shaking the bottle manually. After 30 days, the filtrate was filled into a brown, disinfected glas bottle, sealed and stored in darkness at 3 • C for further use.

The preparation of the stock solution AV-PVP is achieved by dissolving 1 g polyvinylpyrrolidone K-30 (PVP) in 10 mL distilled water under stirring at room temperature (RT). 2 mL pure AV gel is placed in another beaker. Under continuous stirring at RT, we added into this beaker 1 mL of the PVP solution.

AV-PVP-Sage is prepared by mixing 2 mL of Sage ethanolic extract into the previously prepared 3 mL stock solution AV-PVP under stirring at RT.

The final formulation AV-PVP-Sage-I 2 is obtained by first dissolving 0.05 g of iodine in 3 mL ethanol under stirring at RT. 1 mL of the iodine solution is added under continuous stirring into AV-PVP-Sage. In the previous study of AV-PVP biopolymers, we added 3 mL of iodine solution dissolved in methanol [31] .

The title biocomplexes were investigated by SEM/EDS, Surface-Enhanced Raman Spectroscopy (SERS), UV-vis, and FTIR, and x-ray diffraction (XRD). The composition of our two biohybrids were confirmed by the analytical methods.

AV-PVP-Sage-I 2 was analyzed at 15 kV by scanning electron microscopy (SEM), model VEGA3 from Tescan (Brno, Czech Republic). The instrument was equipped with an energy-dispersive X-ray spectroscopy (EDS). One drop of AV-PVP-Sage-I 2 was dispersed in distilled water and placed onto a carbon-coated copper grid. The sample was dried under ambient conditions and coated with a gold film by a Quorum Technology Mini Sputter Coater. The SEM was employed to examine the morphology of the sample. The elemental composition of the biohybrid was analyzed by EDS analysis.

The UV-vis analysis of AV-PVP-Sage and AV-PVP-Sage-I 2 was done by a UV-Vis spectrophotometer model 2600i from Shimadzu (Kyoto, Japan), using the wavelength range from 195 to 800 nm.

Raman analysis of the formulation AV-PVP-Sage-I 2 was performed at room temperature on a RENISHAW (Gloucestershire, UK) combined with an optical microscope. The excitation of the solid-state laser beam with the wavelength of 785 nm, was focused onto the sample through the 50× objective of a confocal microscope (Spot diameter-2micron). The sample solution was filled into a standard cuvette (1 cm × 1 cm) and placed into the pathway of the laser beam. A CCD-based monochromator covering a spectral range of 50-3400 cm −1 Collected the scattered light. Output power was 10%, the spectral resolution −1 cm −1 and the integration time was -300 s.

The FTIR analysis of AV-PVP-Sage and AV-PVP-Sage-I 2 was performed on a ATR IR spectrometer with a Diamond window (Shimadzu, Kyoto, Japan). The samples were freeze-dried and then analyzed between 400 to 4000 cm −1 .

AV-PVP-Sage and AV-PVP-Sage-I 2 were analyzed by XRD (BRUKER, D8 Advance, Karlsruhe, Germany). Cu radiation with a wavelength of 1.54060, coupled Two Theta/Theta with time/step of 0.5 s and a step size of 0.03 were employed.

The antimicrobial testing was performed with reference microbial strains of S. pneumoniae ATCC 49619, S. aureus ATCC 25923, E. faecalis ATCC 29212, S. pyogenes ATCC 19615, Bacillus subtilis WDCM 0003 Vitroids, P. mirabilis ATCC 29906, E. coli WDCM 00013 Vitroids, P. aeruginosa WDCM 00026 Vitroids, K. pneumoniae WDCM 00097 Vitroids, and C. albicans WDCM 00054 Vitroids. The reference strains were kept at −20 • C until inoculation with MHB by adding the fresh microbes. The resulting suspensions were stored at 4 • C until further use.

3.6. Determination of Antimicrobial Properties of AV, AV-PVP-I 2 , AV-PVP-I 2 -NaI, and AV-PVP-NaI

We investigated the antibacterial activities of AV-PVP-Sage-I 2 against nine reference bacterial strains in comparison to the antibiotic gentamicin. These are the Gram-positive S. pneumoniae ATCC 49619, S. aureus ATCC 25923, S. pyogenes ATCC 19615, E. faecalis ATCC 29212, and B. subtilis WDCM 00003. The Gram-negative bacteria included P. mirabilis ATCC 29906, P. aeruginosa WDCM 00026, E. coli WDCM 00013, and K. pneumoniae WDCM 00097. C. albicans WDCM 00054 was utilized to investigate the antifungal activities and compared with the antibiotic nystatin as positive control. The negative controls of the solvents ethanol and water showed no inhibition zones and were not mentioned further. The antimicrobial tests on discs and sutures were repeated three times. We reported the average of the independent experiments in this study.

We utilized the zone of inhibition plate method to investigate the antimicrobial activity of AV-PVP-Sage-I 2 against the selected microorganisms [89] . The bacterial strains were suspended in 10 mL MHB and incubated at 37 • C for 2 to 4 h. The fungal strain C. albicans WDCM 00054 was incubated on Sabouraud Dextrose broth at 30 • C. We evenly seeded disposable, sterilized Petri dishes with MHA with microbial culture of 100 µL with sterile cotton swabs. The microbial culture was previously adjusted to 0.5 McFarland standard. The Petri dishes were dried for 10 min and utilized in the antimicrobial testing.

The antimicrobial testing was performed according to the Clinical and Laboratory Standards Institute (CLSI) recommendations against the antibiotic discs of gentamycin and nystatin [90] . We soaked 2 mL of AV-PVP-Sage-I 2 with concentrations of 11 µg/mL, 5.5 µg/mL, 2.75, and 1.38 µg/mL on sterile filter paper discs for 24 h. After removing the discs from the solution, we dried the discs for 24 h under ambient conditions. C. albicans WDCM 00054 was incubated for 24 h at 30 • C on agar plates. We measured the diameter of the zone of inhibition (ZOI) with a ruler to the nearest millimeter. The microbial inhibition towards AV-PVP-Sage-I 2 is revealed in the diameters of clear inhibition zone around the disc. The reference strains are considered resistant, if there is no inhibition zone.

AV-PVP-Sage-I 2 was dip-coated on uncoated sterile, multifilamented PGA sutures of approximately 2.5 cm. These sutures treated with acetone, dried at room temperature and immersed for 18 h into 50 mL of AV-PVP-Sage-I 2 solution (11 µg/mL) at 25 • C. The blue color of the sutures changed to brown-blue. The impregnated sutures were then dried for 24 h under ambient conditions. The dried sutures were tested in vitro by the zone of inhibition assay against the 10 reference strains (S. pneumoniae ATCC 49619, S. aureus ATCC 25923, E. faecalis ATCC 29212, S. pyogenes ATCC 19615, Bacillus subtilis WDCM 00003, E. coli WDCM 00013, P. aeruginosa WDCM 00026, P. mirabilis ATCC 29906, K. pneumoniae WDCM 00097, and C. albicans WDCM 00054). We compared the uncoated and the impregnated sutures by SEM analysis.

We used SPSS software (version 17.0, SPSS Inc., Chicago, IL, USA) for the statistical analysis. The data is represented as mean. The statistical significance between groups is calculated by one-way ANOVA. Any value of p < 0.05 was considered statistically significant.

Easily accessible, one-pot, bio-synthesized biopolymers with iodine are potential alternatives to overcome increasing antimicrobial resistance. Our biohybrid is a strong antifungal agent against C. albicans even at a very low concentration of 2.75 µg/mL. The formulation exerted antibacterial activities against five Gram-positive and two Gram-negative pathogens. The Gram-negative pathogens E. coli and K. pneumonia were intermediately susceptible to our compound. The majority of the studied microorganisms are susceptible at a very low concentration of iodine. Such low concentrations may reduce the incidence of iodine related disadvantages. The iodine release allows longer lasting effects, in synergism with the available phytochemicals within AV and Sage. The results may enable the use of AV-PVP-Sage-I 2 as a microbicidal disinfectant and coating agent against resistant microorganisms. The inhibitory action of AV-PVP-Sage-I 2 on sutures follows the same trends and potentiates prevention of surgical site infections. Further investigations are planned to assess the suitability of the title formulation AV-PVP-Sage-I 2 for coating wound dressing materials and personal protective equipment. Smart bio-antimicrobials are interesting alternatives as sustainable basic disinfectants and coating materials. Such biomaterials may serve the public during health care system failures.

The following are available online. Figure S1 : Raman analysis full spectrum, Figure S2 : FTIR spectrum of PVPI, Figure S3 : FTIR spectrum of AV, Table S1 . 

Burden of AMR Collaborative Group. Attributable deaths and disability-adjusted lifeyears caused by infections with antibiotic-resistant bacteria in the EU and the European Economic Area in 2015: A population-level modelling analysis

Emerging Strategies to Combat ESKAPE Pathogens in the Era of Antimicrobial Resistance: A

A payer perspective of the hospital inpatient additional care costs of antimicrobial resistance in France: A matched case-control study

A Look Behind the Scenes at COVID-19: National Strategies of Infection Control and Their Impact on Mortality

Hospital-Acquired SARS-Cov-2 Infections in Patients: Inevitable Conditions or Medical Malpractice?

Bacterial and fungal co-infection in individuals with coronavirus: A rapid review to support COVID-19 antimicrobial prescribing

Plant Natural Products Targeting Bacterial Virulence Factors

Surface Immobilization of Nano-Silver on Polymeric Medical Devices to Prevent Bacterial Biofilm Formation

Silver Nanoparticles: Synthesis and Application for Nanomedicine

Nanotechnology as an Alternative to Reduce the Spread of COVID-19

Green Nanotechnology-Driven Drug Delivery Assemblies

Green Synthesis of Potent Antimicrobial Silver Nanoparticles Using Different Plant Extracts and Their Mixtures

Bactericidal and Cytotoxic Properties of Silver Nanoparticles

Plant-Based Synthesis of Silver Nanoparticles Using Aqueous Leaf Extract of Salvia officinalis: Characterization and its Antiplasmodial Activity

Synergistic Mechanisms of Constituents in Herbal Extracts during Intestinal Absorption: Focus on Natural Occurring Nanoparticles

Review on Medicinal Plants as Antimicrobial Therapeutics: Potential Avenues of Biocompatible Drug Discovery. Metabolites

Antibacterial activity of medicinal plants against ESKAPE: An update

Bioactive Profile of Various Salvia officinalis L. Preparations. Plants

Pharmacological properties of Salvia officinalis and its components

Facile biofabrication of silver nanoparticles using Salvia officinalis leaf extract and its catalytic activity towards Congo red dye degradation

Properties of Salvia officinalis L. and Thymus serpyllum L. Extracts Free and Embedded into Mesopores of Silica and Titania Nanomaterials

Extraction of Carnosic Acid and Carnosol from Sage (Salvia officinalis L.) Leaves by Supercritical Fluid Extraction and Their Antioxidant and Antibacterial Activity

Evaluation of bioactive properties and phenolic compounds in different extracts prepared from Salvia officinalis L

Sage Species Case Study on a Spontaneous Mediterranean Plant to Control Phytopathogenic Fungi and Bacteria

Antioxidant and Anti-Inflammatory Activities of Cytocompatible Salvia officinalis Extracts: A Comparison between Traditional and Soxhlet Extraction

Chemical Composition, Antioxidant and Anti-Inflammatory Properties of Salvia Officinalis Extract from Algeria

Recent Advances in the Analysis of Rosmarinic Acid from Herbs in the Lamiaceae Family

Composition and Applications of Aloe vera Leaf Gel

Pharmacological Update Properties of Aloe Vera and its Major Active Constituents

Facile Synthesis of Antimicrobial Aloe Vera-"Smart

Mirbella Cáceres-Farfán, M. In vitro evaluation of anthraquinones from Aloe vera (Aloe barbadensis Miller) roots and several derivatives against strains of influenza virus

Aloe Polysaccharides Inhibit Influenza A Virus Infection-A Promising Natural Anti-flu Drug

Aloe-emodin inhibits Staphylococcus aureus biofilms and extracellular protein production at the initial adhesion stage of biofilm development

Extraction, Purification, Structural Characteristics, Biological Activities and Pharmacological Applications of Acemannan, a Polysaccharide from Aloe vera: A Review

Antibacterial Effect of Aloe Vera Gel against Oral Pathogens: An In-vitro Study

Comparative Analysis of Antimicrobial Activity of Methanolic Extracts of Aloe Vera and Quantification of Aloe-Emodin Collected from Different Climatic Zones of India

Evaluation of anti-infective potencies of formulated aloin A ointment and aloin A isolated from Aloe barbadensis Miller

Aloe vera gel: Effective Therapeutic Agent against Multidrug-Resistant Pseudomonas aeruginosa Isolates Recovered from Burn Wound Infections

Composite wound dressings of pectin and gelatin with aloe vera and curcumin as bioactive agents

Direct Spectrophotometric Determination of Hesperidin in Pharmaceutical Preparations

An analysis of the influence of growth periods on physical appearance, and acemannan and elemental distribution of Aloe vera L. gel

Antiplasmodial potential and quantification of aloin and aloe-emodin in Aloe vera collected from different climatic regions of India

A panoptic study of antioxidant potential of foliar gel at different harvesting regimens of Aloe vera L

Effect of different drying procedures on the bioactive polysaccharide acemannan from Aloe vera (Aloe barbadensis Miller)

Iodine Chemistry and Applications

Investigating the Complexation and Release Behaviors of Iodine in Poly(vinylpyrrolidone)-Iodine Systems through Experimental and Computational Approaches

Treatment data using a topical povidone-iodine antiseptic in patients with superficial skin abscesses

Synthesis, structure, and bonding in polyiodide and metal iodide−iodine systems

Polymeric Iodophors: Preparation, Properties, and Biomedical Applications

Genesis of Complex Polyiodide Networks: Insights on the Blue Box/I − /I 2 Ternary System

Testing the tools for revealing and characterizing the iodine-iodine halogen bond in crystals

Modern level for the prediction of properties of iodine-containing organic compounds: Iodine forming halogen bonds

Anion composed of two asymmetric triiodide moieties: A competition between halogen and hydrogen bond

A cyclic I 10

− anion in the layered crystal structure of theophyllinium pentaiodide, C 7 H 9 I 5 N 4 O 2

Smart" triiodide compounds: Does halogen bonding influence antimicrobial activities? Pathogens

Halogen and hydrogen bonding in the layered crystal structure of 2-iodoaniliniumtriiodide

Alkyl ammonium cation stabilized biocidal polyiodides with adaptable high density and low pressure

Antimicrobial Hexaaquacopper(II) Complexes with Novel Polyiodide Chains

Halogen bonding in Crystal structure of bis(1,4,7,10-tetraoxacyclododecane-κ 4 O,O ,O ,O )cesium triiodide, C 16 H 32 CsI 3 O 8

Preparation and structural and spectroscopic characterization of triiodides [M(12-crown-4) 2 ]I 3 with M = Na and Rb

Structure and Antimicrobial properties of bis(1,4,7,10-tetraoxacyclododecane-κ 4 O,O ,O ,O )cesium pentaiodide, C 16 H 32 CsI 5 O 8

Preparation and structural and spectroscopic characterization of a pentaiodide

Polymer-Iodine Complexes: An Update

Antimicrobial Polymers: The Potential Replacement of Existing Antibiotics?

Povidone iodine in wound healing: A review of current concepts and practices

Iodine complexed poly(vinylpyrrolidone) plasma polymers as broad spectrum antiseptic coating

Anti-microbial and skin wound dressing application of molecular iodine nanoparticles

Polymeric Coatings with Antimicrobial Activity: A Short Review

Polymer sutures for simultaneous wound healing and drug delivery-A review

Antimicrobial characteristics and biocompatibility of the surgical sutures coated with biosynthesized silver nanoparticles

Smart" antimicrobial nanocomplexes with potential to decrease surgical site infections (SSI)

Efficacy of silver coated surgical sutures on bacterial contamination, cellular response and wound healing

Intermolecular Interactions and the Release Pattern of Electrospun Curcumin-Polyvinyl (pyrrolidone) Fiber

Ultraviolet absorption spectra of iodine, iodide ion and triiodide ion

Hexakis(2,3,6-tri-O-methyl)-α-cyclodextrin-I 5 -complex in aqueous I − /I 3 − thermocells and enhancement in the Seebeck coefficient

Iodide and triiodide anion complexes involving anion-π interactions with a tetrazine-based receptor

Iodine binding and release from antimicrobial hemostatic polymer foams

Facile fabrication of cellulose membrane containing polyiodides and its antibacterial properties

Raman spectroscopy study of new thia-and oxazinoquinolinium triodides

Assembling Polyiodides and Iodobismuthates Using a Template Effect of a Cyclic Diammonium Cation and Formation of a Low-Gap Hybrid Iodobismuthate with High Thermal Stability

Preparation of aloe vera mucilage-ethyl vanillin Nano-emulsion and its characterization. Mater

Quantitative Analysis of Copolymers and Blends of Polyvinyl Acetate (PVAc) Using Fourier Transform Infrared Spectroscopy (FTIR) and Elemental Analysis (EA)

Effect of PVA Blending on Structural and Ion Transport Properties of CS:AgNt-Based Polymer Electrolyte Membrane

Situ Generation of Bimetallic Nanoparticles in Cotton Fabric Using Aloe Vera Leaf Extract, as a Reducing Agent

Preparation and characterization of Aloe vera acetate and electrospinning fibers as promising antibacterial properties materials

Research on the preparation and antibacterial properties of 2-Nthiosemicarbazide-6-O-hydroxypropyl chitosan membranes with iodine

Single-disk antibiotic-sensitivity testing of staphylococci: An analysis of technique and results

Performance Standards for Antimicrobial Disk Susceptibility Testing

The authors are grateful to Hamid Abu Sara, his valuable skills and dedication during the antimicrobial studies. We appreciate the professional support of Sohaib Khan during the investigation and his skillful FTIR analysis. We are thankful to Hussain Alawadhi, Mohammad Shameer, Muhammed Irshad from Sharjah University for performing the SEM, XRD, Raman and EDS analysis. We are thankful to Iman Haj Bloukh, Ajman University and Ibrahim Haj Bloukh, Ajman University for their valuable input and support during the investigations. We also like to thank the artist "@art_by_amie_" for providing us with a digital art image as graphical abstract.

The authors declare no conflict of interest.