key: cord-0031460-43lczwcu
authors: Nechaeva, Anna; Artyukhov, Alexander; Luss, Anna; Shtilman, Mikhail; Gritskova, Inessa; Shulgin, Anton; Motyakin, Mikhail; Levina, Irina; Krivoborodov, Efrem; Toropygin, Ilya; Chistyakov, Evgeniy; Gurevich, Leonid; Mezhuev, Yaroslav
title: Synthesis of Amphiphilic Copolymers of N-Vinyl-2-pyrrolidone and Allyl Glycidyl Ether for Co-Delivery of Doxorubicin and Paclitaxel
date: 2022-04-23
journal: Polymers (Basel)
DOI: 10.3390/polym14091727
sha: ba1d81e1f4a79731d65ade60c3e94631f9998b7b
doc_id: 31460
cord_uid: 43lczwcu

Co-delivery of chemotherapeutics in cancer treatment has been proven essential for overcoming multidrug resistance and improving the outcome of therapy. We report the synthesis of amphiphilic copolymers of N-vinyl-2-pyrrolidone and allyl glycidyl ether of various compositions and demonstrate that they can form nanoaggregates capable of simultaneous covalent immobilization of doxorubicin by the epoxy groups in the shell and hydrophobic-driven incorporation of paclitaxel into the core of nanoparticles. The structure of the obtained copolymers was characterized by (13)C NMR, IR, and MALDI spectroscopy, as well as adsorption at the water/toluene interface. A linear increase in the number-average molecular weight of amphiphilic copolymers and a decrease in the number-average diameter of macromolecular aggregates with an increase in the ratio N-vinyl-2-pyrrolidone/allyl glycidyl ether were observed. The assembled nanocarriers were characterized by DLS. The reported novel nanocarriers can be of interest for delivery and co-delivery of a wide range of pharmacological preparations and combined therapy for cancer and other deceases.

In 2020, oncological diseases were detected in 19.3 million people and caused the death of almost 10 million people [1] . Although a number of drugs are known to be used used in chemotherapy, their application is complicated by low bioavailability and toxic side effects. The use of polymer carriers for anticancer drugs opens up new possibilities in cancer treatment by optimizing and vectorizing the pharmacological action, decreasing toxicity and increasing bioavailability of drugs [2] [3] [4] [5] . The application of polymer nanoparticles, hydrogels [6] , amphiphilic co-network gels [7] [8] [9] [10] and other macromolecular systems [11, 12] allows for a significant increasing in the bioavailability and a decreasing in the toxic effects of pharmacologically active drugs. One of the approaches to the preparation of drug carriers is related to the use of amphiphilic copolymers capable of self-assembly with formation of nanoparticles [13] . Block copolymers [14] and graft copolymers [15] with hydrophilic fragments based on polyethylene oxide, as well as poly(N-vinylcaprolactam), poly(N-vinyl-2-pyrrolidone) and hydrophobic fragments based on polyglycolide, polylactide and poly(ε-caprolactone) [16] [17] [18] [19] , are used as amphiphilic polymer carriers for the formation of nanoparticles.

Recently, the authors developed an approach to the synthesis of linear amphiphilic polymers based on low-molecular-weight poly(N-vinyl-2-pyrrolidone) with hydrophilic alkyl end groups. The amphiphilic low-molecular-weight poly(N-vinyl-2-pyrrolidone) proved to be effective in terms of loading with hydrophobic substances [20, 21] and does not display any significant toxicity [22, 23] . However, the amphiphilic N-vinyl-2-pyrrolidone homopolymer is relatively ineffective as a carrier for drugs with high solubility in water [24] , which limits the possibilities of its application in combination therapy. Combination chemotherapy is one of the leading approaches in the treatment of a number of cancer types [25] . Therefore, the present article is dedicated to the synthesis and investigation of the properties of a new amphiphilic copolymer of N-vinyl-2-pyrrolidone containing chemically reactive allyl glycidyl ether units. The introduction of the allyl glycidyl ether residues into the copolymer carrier chain enables covalent immobilization of water-soluble drugs containing nucleophilic functional groups. Doxorubicin meets these requirements and was therefore selected as the model nucleophilic water-soluble anticancer drug.

Doxorubicin, a common broad-spectrum drugs, has shown high efficacy in the treatment of breast cancer [26] , lung cancer [27] , gastric cancer [28] , sarcoma [29] , lymphoma [30] , neuroblastoma [31] , glioblastoma [32] and other oncological diseases [33] . Doxorubicin both intercalates into DNA [34] and stimulates the formation of radicals that damage cell membranes [35] , which determines its antitumor activity. Its high cardiotoxicity limits its application in treatment of oncological diseases [36] [37] [38] . Minimization of cardiotoxic effects and the implementation of combination therapy are the main goals in using nanosized carriers for doxorubicin immobilization [39] . As carriers of doxorubicin, nanosystems based on boron nitride [40] , lipids [41] , dextran [42] , PLGA [43] , polydopamine [44] , iron oxide [45] , gold [46] , collagen and poly(3-acrylamidophenylboronic acid) [47] have been reported in the literature. The reported strategies involve the controlled release of doxorubicin, which has a cumulative dose [48] and limits the available treatment options. In this respect, the strategy based on covalent immobilization of doxorubicin through an amino group not involving the pharmacophore anthracycline fragment [33] appears to be the most promising in terms of reducing cardiac toxicity.

The hydrophobic paclitaxel, which was found to be especially effective in combination therapy with doxorubicin [49] [50] [51] , was chosen as the second model anticancer drug. Although the use of pure paclitaxel is hampered by its negligible solubility in water, low bioavailability and development of myelosuppression and peripheral neuropathy [52] , its inclusion in nanocarriers can significantly increase the therapeutic effect [53] . In the present article, the hydrophobic core of the aggregates of an amphiphilic copolymer of N-vinyl-2pyrrolidone and allyl glycidyl ether containing covalent-immobilized doxorubicin were loaded with paclitaxel. The use of amphiphilic copolymers of N-vinyl-2-pyrrolidone and allyl glycidyl ether opens up possibilities for the immobilization of any drug combination in which one drug is sufficiently nucleophilic and the other is hydrophobic.

Monomers of N-vinyl-2-pyrrolidone (VP) and allyl glycidyl ether (AGE) were purchased from Sigma-Aldrich and additionally purified by vacuum distillation. 1,4-dioxane was purchased from KhimMed (Moscow, Russia), dried over sodium and distilled under a vacuum. N-octadecylmercaptan and azobisisobutyronitrile (AIBN) from Sigma-Aldrich (St. Louis, MO, USA) were used without further purification. Doxorubicin hydrochloride (Synbias Pharma, Kyiv, Ukraine) and paclitaxel (LC Laboratories, New Boston, MA, USA) were used for immobilization. Triethylamine (KhimMed, Moscow, Russia) was used as a catalyst for covalent immobilization of doxorubicin by epoxy groups of the amphiphilic copolymer. The amphiphilic copolymer of N-vinyl-2-pyrrolidone and allyl glycidyl ether were isolated by precipitation into diethyl ether (KhimMed, Moscow, Russia). Dialysis was performed using a 500 Da molecular weight cutoff membrane (Labware supplier store 500 MWCO, Darmstadt, Germany).

The structure of the synthesized compounds was characterized by 13 C NMR in DMSO-d6 medium using a Bruker Avance 500 (Bruker, Zurich, Switzerland, New Materials and Technologies Research Center at IBCP RAS), IR spectroscopy in KBr pellets using a Nicolet 380 (Thermo Scientific, Waltham, MA, USA), MALDI tablets (Ultraflex II, Bruker, Karlsruhe, Germany, mass spectrometry studies were performed using the "Human Proteome" resource center equipment, Moscow, Russia) by desorption with Nd:YAG laser (355 nm) and UV-vis spectroscopy (Eppendorf BioSpectrometer, Hamburg, Germany). Particle size distributions were recorded by dynamic laser light scattering NANO-flex II (Colloid Metrix, Meerbusch, Germany).

In an ampoule, 10 g (0.09 mol) of N-vinyl-2-pyrrolidone and a specified amount of allyl glycidyl ether were dissolved in 20 mL of 1,4-dioxane. Then, 0.1 g (6 × 10 −4 mol) of AIBN and 0.286 g (10 −3 mol) of n-octadecylmercaptan were dissolved in the obtained mixture of co-monomers. The ampoule was purged with argon and sealed and then kept for 20 h at 343 K. The product was isolated by precipitation in a tenfold volume excess of diethyl ether. The isolated copolymer of N-vinyl-2-pyrrolidone and allyl glycidyl ether was dried under vacuum at room temperature until constant weight was achieved. The number-average molecular weight was determined by reverse iodometric titration after oxidation of terminal sulfide groups with m-chloroperbenzoic acid, as described previously [54] . Copolymerization was carried out for different amounts of allyl glycidyl ether in the reaction system: 0.01 mol, 0.02 mol, 0.03 mol, and 0.05 mol.

Investigation of the Adsorption of the Amphiphilic Copolymer of N-Vinyl-2-pyrrolidone and Allyl Glycidyl Ether on the Water/Toluene Interface Surface tension isotherms and critical aggregation concentrations (CAC) at 296 K were obtained from adsorption of amphiphilic copolymers of N-vinyl-2-pyrrolidone and allyl glycidyl ether at the water/toluene interface using a KRÜSS DSA30 (KRÜSS, Hamburg, Germany) particle shape analyzer and the pendant drop method. Adsorption was calculated using the Gibbs adsorption equation; the limiting value of Gibbs adsorption corresponding to the complete monolayer (Г max ) was determined from the slope of the linear dependence plotted in the coordinates "C/Г vs. C". Calculation of the effective thickness of the adsorption layer (δ) and the effective area occupied by an individual amphiphilic copolymer macromolecule on the interfacial surface (S) was carried out using Equations (1) and (2), respectively.

where Г max is the maximum value of Gibbs adsorption; N A is the Avogadro number; and M and ρ are the molecular weight and density of the copolymers, respectively. CAC was determined by the intersection method in the coordinates "σ vs. lnC".

Immobilization was carried out in aqueous medium as a result of the reaction of 0.129 g of doxorubicin hydrochloride and 1 g of an amphiphilic copolymer of N-vinyl-2-pyrrolidone and allyl glycidyl ether (VP/AGE = 3). Catalysis was achieved by the addition of 0.022 g of triethylamine. The reaction system was placed in a sealed ampoule, purged with argon and kept for 5 days. The doxorubicin immobilization product was purified by dialysis against water using a 500 MWCO membrane (Labware supplier store, Darmstadt, Germany).

An amount of 0.2 g of a copolymer of N-vinyl-2-pyrrolidone and allyl glycyl ether with a terminal n-octadecylthio group and a molecular weight of 1850 Da was dissolved in 10 mL of distilled water. After 2 min of ultrasonic treatment, 1 mL of a solution of paclitaxel in chloroform at a concentration of 5 × 10 −3 g·mL −1 was added to the solution of the amphiphilic copolymer carrier, and the resulting emulsion was subjected to ultrasonication for 18 min. Then, chloroform was removed by vacuum distillation in a rotary evaporator; excluded paclitaxel was separated by filtration through a 0.45 µm filter.

The synthesis of amphiphilic copolymers of N-vinyl-2-pyrrolidone and allyl glycyl ether was carried out by a radical copolymerization reaction with AIBN as an initiator and in the presence of n-octadecylmercaptan as a chain transfer agent (Scheme 1).

Immobilization was carried out in aqueous medium as a result of the reaction of 0.129 g of doxorubicin hydrochloride and 1 g of an amphiphilic copolymer of N-vinyl-2-pyrrolidone and allyl glycidyl ether (VP/AGE = 3). Catalysis was achieved by the addition of 0.022 g of triethylamine. The reaction system was placed in a sealed ampoule, purged with argon and kept for 5 days. The doxorubicin immobilization product was purified by dialysis against water using a 500 MWCO membrane (Labware supplier store, Darmstadt, Germany).

An amount of 0.2 g of a copolymer of N-vinyl-2-pyrrolidone and allyl glycyl ether with a terminal n-octadecylthio group and a molecular weight of 1850 Da was dissolved in 10 mL of distilled water. After 2 min of ultrasonic treatment, 1 mL of a solution of paclitaxel in chloroform at a concentration of 5 × 10 −3 g·mL −1 was added to the solution of the amphiphilic copolymer carrier, and the resulting emulsion was subjected to ultrasonication for 18 min. Then, chloroform was removed by vacuum distillation in a rotary evaporator; excluded paclitaxel was separated by filtration through a 0.45 µm filter.

The synthesis of amphiphilic copolymers of N-vinyl-2-pyrrolidone and allyl glycyl ether was carried out by a radical copolymerization reaction with AIBN as an initiator and in the presence of n-octadecylmercaptan as a chain transfer agent (Scheme 1). The structure of the synthesized copolymer was characterized by 13 C NMR, IR and MALDI spectroscopy. The assignment of signals in the 13 C NMR spectrum of the synthesized amphiphilic copolymer is shown in Figure 1 (the signal of carbon atom I of the pyrrolidone ring has a chemical shift of 172.81 ppm) and is consistent with the presence of Nvinyl-2-pyrrolidone and allyl glycidyl ether residues in the chain, as well as the terminal n-octadecyl group. The structure of the synthesized copolymer was characterized by 13 C NMR, IR and MALDI spectroscopy. The assignment of signals in the 13 C NMR spectrum of the synthesized amphiphilic copolymer is shown in Figure 1 (the signal of carbon atom I of the pyrrolidone ring has a chemical shift of 172.81 ppm) and is consistent with the presence of N-vinyl-2-pyrrolidone and allyl glycidyl ether residues in the chain, as well as the terminal n-octadecyl group. When assigning the signals, we used the literature data on the analysis of 13 C NMR spectra of polymers and copolymers of N-vinyl-2-pyrrolidone [55, 56] .

In the IR spectra of the synthesized amphiphilic copolymer of N-vinyl-2-pyrrolidone and allyl glycyl ether (Figure 2A ), signals characteristic of poly(N-vinyl-2-pyrrolidone) are clearly manifested, and there are also signals at 1049.5 and 1089.7 cm −1 caused by asym- When assigning the signals, we used the literature data on the analysis of 13 C NMR spectra of polymers and copolymers of N-vinyl-2-pyrrolidone [55, 56] .

In the IR spectra of the synthesized amphiphilic copolymer of N-vinyl-2-pyrrolidone and allyl glycyl ether (Figure 2A ), signals characteristic of poly(N-vinyl-2-pyrrolidone) are clearly manifested, and there are also signals at 1049.5 and 1089.7 cm −1 caused by asymmetric C-O-C stretching vibrations of the ether fragment, as well as bands at 845.4 cm −1 and 881.4 cm −1 corresponding to symmetric skeletal vibrations of the epoxy ring. The presence of these signals is associated with the presence of allyl glycidyl ether residues in the polymer chain [57] . When assigning the signals, we used the literature data on the analysis of 13 C NMR spectra of polymers and copolymers of N-vinyl-2-pyrrolidone [55, 56] .

In the IR spectra of the synthesized amphiphilic copolymer of N-vinyl-2-pyrrolidone and allyl glycyl ether (Figure 2A ), signals characteristic of poly(N-vinyl-2-pyrrolidone) are clearly manifested, and there are also signals at 1049.5 and 1089.7 cm −1 caused by asymmetric C-O-C stretching vibrations of the ether fragment, as well as bands at 845.4 cm −1 and 881.4 cm −1 corresponding to symmetric skeletal vibrations of the epoxy ring. The presence of these signals is associated with the presence of allyl glycidyl ether residues in the polymer chain [57] . MALDI spectra with the detection of positively and negatively charged ions were also consistent with the structure of the resulting amphiphilic copolymer. The MALDI spectra with registration of negatively charged particles predominantly detect the degradation products of the amphiphilic copolymer ( Figure 3 ). MALDI spectra with the detection of positively and negatively charged ions were also consistent with the structure of the resulting amphiphilic copolymer. The MALDI spectra with registration of negatively charged particles predominantly detect the degradation products of the amphiphilic copolymer ( Figure 3 ). The MALDI spectra obtained under the conditions of registration of positively charged ions ( Figure 4 ) are characterized by an m/z difference between the most intense signals close to 111.14, which corresponds to the compound repeating unit of N-vinyl-2-pyrrolidone. The MALDI spectra obtained under the conditions of registration of positively charged ions (Figure 4 ) are characterized by an m/z difference between the most intense signals close to 111.14, which corresponds to the compound repeating unit of N-vinyl-2pyrrolidone. The MALDI spectrum of the amphiphilic copolymer of N-vinyl-2-pyrrolidone and allyl glycyl ether obtained at a ratio of VP/AGE = 3 ( Figure 4 ) is in qualitative agreement with its number-average molecular weight determined by end-group analysis, which is 1850.

The number-average degree of polymerization of amphiphilic copolymers increases almost linearly with an increasing VP/AGE concentration ratio in the reaction system (Figure 5 ). The obtained dependence indicates a lower rate of chain growth with the participation of allyl glycidyl ether compared to the rate of addition of N-vinyl-2-pyrrolidone The MALDI spectrum of the amphiphilic copolymer of N-vinyl-2-pyrrolidone and allyl glycyl ether obtained at a ratio of VP/AGE = 3 ( Figure 4 ) is in qualitative agreement with its number-average molecular weight determined by end-group analysis, which is 1850.

The number-average degree of polymerization of amphiphilic copolymers increases almost linearly with an increasing VP/AGE concentration ratio in the reaction system ( Figure 5 ). The obtained dependence indicates a lower rate of chain growth with the participation of allyl glycidyl ether compared to the rate of addition of N-vinyl-2-pyrrolidone and a significant contribution of chain transfer to allyl glycidyl ether. In this case, relation (3) must be satisfied:

where C(VP) and C(AGE) are the initial concentrations of N-vinyl-2-pyrrolidone and allylglycidyl ether in the reaction mixture, respectively; and k p and k tm are the effective rate constants of chain propagation with addition of N-vinyl-2-pyrrolidone and chain transfer to allyl glycidyl ether, respectively. and a significant contribution of chain transfer to allyl glycidyl ether. In this case, relation (3) must be satisfied:

where C(VP) and C(AGE) are the initial concentrations of N-vinyl-2-pyrrolidone and allylglycidyl ether in the reaction mixture, respectively; and kp and ktm are the effective rate constants of chain propagation with addition of N-vinyl-2-pyrrolidone and chain transfer to allyl glycidyl ether, respectively. 

Taking into account the high activity of allyl monomers in chain transfer and the 

Taking into account the high activity of allyl monomers in chain transfer and the passivity of allyl radicals in reinitiation [58] , the mechanism of molecular weight regulation during the copolymerization of N-vinyl-2-pyrrolidone and allyl glycidyl ether in the presence of n-octadecylmercaptan can be represented by Scheme 2. Although the resulting the allyl radical is not sufficiently active in reinitiation, it can interact with noctadecylmercaptan to form an octadecylthio radical active in reinitiation. The decisive role of chain transfer to allyl glycidyl ether is evidenced by the insignificant value of the free term of linear regression (4), which is consistent with the theoretical Equation (3). 

Taking into account the high activity of allyl monomers in chain transfer and the passivity of allyl radicals in reinitiation [58] , the mechanism of molecular weight regulation during the copolymerization of N-vinyl-2-pyrrolidone and allyl glycidyl ether in the presence of n-octadecylmercaptan can be represented by Scheme 2. Although the resulting the allyl radical is not sufficiently active in reinitiation, it can interact with n-octadecylmercaptan to form an octadecylthio radical active in reinitiation. The decisive role of chain transfer to allyl glycidyl ether is evidenced by the insignificant value of the free term of linear regression (4), which is consistent with the theoretical Equation (3). Amphiphilic copolymers obtained at various VP/AGE ratios in the reaction mixture, when dissolved in water, are capable of forming nanosized aggregates as a result of selfassembly ( Figure 6 ). Amphiphilic copolymers obtained at various VP/AGE ratios in the reaction mixture, when dissolved in water, are capable of forming nanosized aggregates as a result of selfassembly ( Figure 6 ). The number-average diameter of the aggregates increases rapidly with incre proportion of AGE in the co-monomer mixture ( Figure 6B) A decrease in the VP/AGE concentration ratio ( Figure 5 ) leads to a decrease i molecular weight of the hydrophilic block and, probably, its hydrophilicity. Obviou A decrease in the VP/AGE concentration ratio ( Figure 5 ) leads to a decrease in the molecular weight of the hydrophilic block and, probably, its hydrophilicity. Obviously, a decrease in the molecular weight of the hydrophilic fragment leads to a decrease in the efficiency of the mechanism of steric stabilization of aggregates. It can also be assumed that an increase in the proportion of AGE residues in the chain leads to an increase in interchain hydrophobic interactions. Therefore, with an increase in the mole fraction of AGE in the initial reaction mixture, both the number-average particle diameter ( Figure 6C ) and PDI increased ( Figure 6D ). The presence of interchain hydrophobic interactions is supported by the transition to a pronounced bimodal intensity distribution of the aggregate diameters, along with the growth of the allyl glycidyl ether ratio in the copolymer ( Figure 6B ).

Surface tension isotherms at the water/toluene interface for copolymers obtained at different ratios of VP and AGE are shown in Figure 7 . With a change in the concentration of amphiphilic copolymers of N-vinyl-2-pyrrolidone and allyl glycidyl ether in a narrow range, a rapid decrease in surface tension to 15-16 mN·m −1 is observed due to adsorption of the copolymer on the interface (Figure 7) . The critical aggregation concentration (CAC) increases with decreasing hydrophilicity and hydrophilic block length (Table 1) . A decrease in the VP/AGE ratio in the reaction system leads to the suppression of core formation in aggregates due to disruption in the packing regularity of hydrophobic fragments. This can be attributed to hydrophobic interactions of terminal n-octadecyl groups and AGE residues. An increase in the proportion of N-vinyl-2-pyrrolidone in the reaction mixture leads not only to an increase in molecular weight but also an increase in the proportion of extended chain conformations in the formed copolymers, which manifests itself as an increase in S0 ( Table 1) .

The resulting amphiphilic copolymers of N-vinyl-2-pyrrolidone and allyl glycidyl ether are capable of simultaneous immobilization of doxorubicin and paclitaxel. Paclitaxel is incorporated into the core of the aggregates via hydrophobic interactions, whereas the With a change in the concentration of amphiphilic copolymers of N-vinyl-2-pyrrolidone and allyl glycidyl ether in a narrow range, a rapid decrease in surface tension to 15-16 mN·m −1 is observed due to adsorption of the copolymer on the interface (Figure 7) . The critical aggregation concentration (CAC) increases with decreasing hydrophilicity and hydrophilic block length (Table 1) . A decrease in the VP/AGE ratio in the reaction system leads to the suppression of core formation in aggregates due to disruption in the packing regularity of hydrophobic fragments. This can be attributed to hydrophobic interactions of terminal n-octadecyl groups and AGE residues. An increase in the proportion of N-vinyl-2-pyrrolidone in the reaction mixture leads not only to an increase in molecular weight but also an increase in the proportion of extended chain conformations in the formed copolymers, which manifests itself as an increase in S 0 ( Table 1) .

The resulting amphiphilic copolymers of N-vinyl-2-pyrrolidone and allyl glycidyl ether are capable of simultaneous immobilization of doxorubicin and paclitaxel. Paclitaxel is incorporated into the core of the aggregates via hydrophobic interactions, whereas the immobilization of doxorubicin is covalent (Scheme 3). The UV-vis spectrum of an aqueous solution of an amphiphilic copolymer of N-vinyl-2-pyrrolidone and allyl glycidyl ether containing immobilized doxorubicin at a concentration of 1.221 g/L has an optical density of 0.587 at a wavelength of 480 nm ( Figure  8 ). Given the molar absorption coefficient of doxorubicin of 13,500 L × mol −1 × cm −1 [59] at a wavelength of 480 nm and the molar fraction of allyl glycidyl ether units in the amphiphilic copolymer of ca. 11% according to reverse acid-base titration, the reaction yield was 16%. This value is close to the content of epoxy groups in the copolymer of N-vinyl-2-pyrrolidone and allyl glycidyl ether obtained at the same VP/AGE molar ratio but in the absence of n-octadecylmercaptan [60] . The UV-vis spectrum of an aqueous solution of an amphiphilic copolymer of N-vinyl-2pyrrolidone and allyl glycidyl ether containing immobilized doxorubicin at a concentration of 1.221 g/L has an optical density of 0.587 at a wavelength of 480 nm (Figure 8 ). Given the molar absorption coefficient of doxorubicin of 13,500 L·mol −1 ·cm −1 [59] at a wavelength of 480 nm and the molar fraction of allyl glycidyl ether units in the amphiphilic copolymer of ca. 11% according to reverse acid-base titration, the reaction yield was 16%. This value is close to the content of epoxy groups in the copolymer of N-vinyl-2-pyrrolidone and allyl glycidyl ether obtained at the same VP/AGE molar ratio but in the absence of n-octadecylmercaptan [60] . The UV-vis spectrum of an aqueous solution of an amphiphilic copolymer of N-vinyl-2-pyrrolidone and allyl glycidyl ether containing immobilized doxorubicin at a concentration of 1.221 g/L has an optical density of 0.587 at a wavelength of 480 nm ( Figure  8 ). Given the molar absorption coefficient of doxorubicin of 13,500 L × mol −1 × cm −1 [59] at a wavelength of 480 nm and the molar fraction of allyl glycidyl ether units in the amphiphilic copolymer of ca. 11% according to reverse acid-base titration, the reaction yield was 16%. This value is close to the content of epoxy groups in the copolymer of N-vinyl-2-pyrrolidone and allyl glycidyl ether obtained at the same VP/AGE molar ratio but in the absence of n-octadecylmercaptan [60] . The covalent immobilization of doxorubicin on the amphiphilic copolymer of N-vinyl-2-pyrrolidone and allyl glycidyl ether was confirmed by the presence of 1123.39 and 727.31 peaks in the MALDI spectrum, with an m/z difference of 397.06 (Figure 9 ), which corresponds to the cleavage of the anthracycline fragment (Scheme 4). The IR spectroscopy data indicate the appearance of new absorption bands observed in the wavenumber range of 1000-1100 cm −1 ( Figure 2B ). The absorption bands appear to correspond to the stretch vibrations of the C-O-bonds of the glycol fragments forming as a result of the hydrolysis of the epoxy groups that occurs in parallel with the covalent immobilization of doxorubicin. Covalent immobilization of doxorubicin on the amphiphilic copolymer of N-vinyl-2pyrrolidone and allyl glycidyl ether (VP/AGE = 3) leads to a slight decrease in the aggregate number-average diameter from 136 nm to 106 nm ( Figure 10 ). Presumably, a slight decrease in the number-average diameter after immobilization of doxorubicin can be explained by partial dehydration of the particle shell, as lower affinity to water is expected for immobilized doxorubicin compared to N-vinyl-2-pyrrolidone residues. The intensityaverage particle diameters increased from 293 nm to 358 nm, whereas the PDI was increased from 0.265 to 0.330. The subsequent incorporation of paclitaxel into the nanosized aggregates with immobilized doxorubicin leads to an increase in the number average particle diameter up to 410 nm (the intensity-average particle diameter was 518 nm), as well as the formation of a fraction of particles of more than 1 µm in diameter, which corresponds to free paclitaxel not incorporated into the aggregates of the amphiphilic copolymer (the latter can be removed by filtration). Furthermore, there are two fractions of particles with a diameter below 1 µm. The fraction of the 200-400 nm particles corresponds to the initial aggregates of the N-vinyl-2-pyrrolidone and allyl glycidyl ether copolymer chains, whereas the 400-800 nm fraction corresponds to secondary aggregation of the initial nanoparticles. Although the particle size distribution is broad, this did not cause any significant hindrances because the system remained stable, and no precipitation of particles from the dispersion was observed. Given the molar absorption coefficient of paclitaxel of 29,800 L × mol −1 × cm −1 at a wavelength of 227 nm [61] , paclitaxel loading was about 65%, as determined by photometry. Covalent immobilization of doxorubicin on the amphiphilic copolymer of N-vinyl-2pyrrolidone and allyl glycidyl ether (VP/AGE = 3) leads to a slight decrease in the aggregate number-average diameter from 136 nm to 106 nm ( Figure 10 ). Presumably, a slight decrease in the number-average diameter after immobilization of doxorubicin can be explained by partial dehydration of the particle shell, as lower affinity to water is expected for immobilized doxorubicin compared to N-vinyl-2-pyrrolidone residues. The intensityaverage particle diameters increased from 293 nm to 358 nm, whereas the PDI was increased from 0.265 to 0.330. The subsequent incorporation of paclitaxel into the nanosized aggregates with immobilized doxorubicin leads to an increase in the number average particle diameter up to 410 nm (the intensity-average particle diameter was 518 nm), as well as the formation of a fraction of particles of more than 1 µm in diameter, which corresponds to free paclitaxel not incorporated into the aggregates of the amphiphilic copolymer (the latter can be removed by filtration). Furthermore, there are two fractions of particles with a diameter below 1 µm. The fraction of the 200-400 nm particles corresponds to the initial aggregates of the N-vinyl-2-pyrrolidone and allyl glycidyl ether copolymer chains, whereas the 400-800 nm fraction corresponds to secondary aggregation of the initial nanoparticles. Although the particle size distribution is broad, this did not cause any significant hindrances because the system remained stable, and no precipitation of particles from the dispersion was observed. Given the molar absorption coefficient of paclitaxel of 29,800 L × mol −1 × cm −1 at a wavelength of 227 nm [61] , paclitaxel loading was about 65%, as determined by photometry. Covalent immobilization of doxorubicin on the amphiphilic copolymer of N-vinyl-2-pyrrolidone and allyl glycidyl ether (VP/AGE = 3) leads to a slight decrease in the aggregate number-average diameter from 136 nm to 106 nm ( Figure 10 ). Presumably, a slight decrease in the number-average diameter after immobilization of doxorubicin can be explained by partial dehydration of the particle shell, as lower affinity to water is expected for immobilized doxorubicin compared to N-vinyl-2-pyrrolidone residues. The intensity-average particle diameters increased from 293 nm to 358 nm, whereas the PDI was increased from 0.265 to 0.330. The subsequent incorporation of paclitaxel into the nanosized aggregates with immobilized doxorubicin leads to an increase in the number average particle diameter up to 410 nm (the intensity-average particle diameter was 518 nm), as well as the formation of a fraction of particles of more than 1 µm in diameter, which corresponds to free paclitaxel not incorporated into the aggregates of the amphiphilic copolymer (the latter can be removed by filtration). Furthermore, there are two fractions of particles with a diameter below 1 µm. The fraction of the 200-400 nm particles corresponds to the initial aggregates of the N-vinyl-2-pyrrolidone and allyl glycidyl ether copolymer chains, whereas the 400-800 nm fraction corresponds to secondary aggregation of the initial nanoparticles. Although the particle size distribution is broad, this did not cause any significant hindrances because the system remained stable, and no precipitation of particles from the dispersion was observed. Given the molar absorption coefficient of paclitaxel of 29,800 L·mol −1 ·cm −1 at a wavelength of 227 nm [61] , paclitaxel loading was about 65%, as determined by photometry. Numerous studies show that due to the high hydrophobicity and negligible solubility of paclitaxel in water, the process of its release from the hydrophobic cores of nanosized aggregates takes days [62] [63] [64] . We recently showed that the uptake by U87 and CRL 2429 cells of aggregates of a structurally similar amphiphilic N-vinyl-2-pyrrolidone homopolymer loaded with a hydrophobic DiI dye is very efficient and reaches saturation within few hours [20, 21] . Given the high uptake rate of amphiphilic poly(N-vinyl-2-pyrrolidone) aggregates by cells, paclitaxel appears to be involved in metabolic processes prior to its passive release from nanoscale aggregates via diffusion.

In this article, doxorubicin and paclitaxel were used as model drugs to demonstrate the possibility of dual loading into nanoaggregates of an amphiphilic copolymer of Nvinyl-2-pyrrolidone and allyl glycidyl ether. The demonstrated approach is rather general; the synthesized polymeric nanocarrier is expected to be applicable for dual loading and co-delivery of other combinations of pharmacologically active substances, provided one component contains an amino group and the other is sufficiently hydrophobic to be included into the aggregate core.

Novel nanocarriers self-assembled from amphiphilic copolymers of N-vinyl-2-pyrrolidone and allyl glycidyl ether containing a terminal n-octadecylthio group were synthesized and characterized. Synthesis of the amphiphilic copolymers was carried out by a radical copolymerization reaction with AIBN as an initiator and in the presence of n-octadecylmercaptan as a chain transfer agent. It has been shown that the molecular weight of the amphiphilic copolymers is determined by chain transfer to allyl glycidyl ether. Reinitiation occurs only with n-octadecylthio radicals formed as a result of the interaction of n-octadecylmercaptan with passive allyl radicals and primary degradation products of AIBN. With an increase in the proportion of allyl glycidyl ether, the size of aggregates formed by amphiphilic copolymers increases. The obtained nanocarriers are shown to be capable of dual loading of common antitumor drugs doxorubicin and paclitaxel. Covalent immobilization of doxorubicin occurs at the epoxy group of allyl glycidyl ether residues in the amphiphilic copolymer and is accompanied by a slight decrease in aggregate size. On the contrary, the loading of paclitaxel in the hydrophobic core of the aggregates leads to a significant increase in the aggregate size and broadening of the size distribution. The described loading strategy can be straightforwardly extended to dual loading of other amine-containing and hydrophobic drugs. The synthesized amphiphilic copolymer of Nvinyl-2-pyrrolidone and allyl glycidyl ether could be of interest for the co-loading and codelivery of a wide range of pharmacological preparations and can lead to new, more efficient combination therapies with reduced cardiotoxicity. Numerous studies show that due to the high hydrophobicity and negligible solubility of paclitaxel in water, the process of its release from the hydrophobic cores of nanosized aggregates takes days [62] [63] [64] . We recently showed that the uptake by U87 and CRL 2429 cells of aggregates of a structurally similar amphiphilic N-vinyl-2-pyrrolidone homopolymer loaded with a hydrophobic DiI dye is very efficient and reaches saturation within few hours [20, 21] . Given the high uptake rate of amphiphilic poly(N-vinyl-2-pyrrolidone) aggregates by cells, paclitaxel appears to be involved in metabolic processes prior to its passive release from nanoscale aggregates via diffusion.

In this article, doxorubicin and paclitaxel were used as model drugs to demonstrate the possibility of dual loading into nanoaggregates of an amphiphilic copolymer of Nvinyl-2-pyrrolidone and allyl glycidyl ether. The demonstrated approach is rather general; the synthesized polymeric nanocarrier is expected to be applicable for dual loading and co-delivery of other combinations of pharmacologically active substances, provided one component contains an amino group and the other is sufficiently hydrophobic to be included into the aggregate core.

Novel nanocarriers self-assembled from amphiphilic copolymers of N-vinyl-2-pyrrolidone and allyl glycidyl ether containing a terminal n-octadecylthio group were synthesized and characterized. Synthesis of the amphiphilic copolymers was carried out by a radical copolymerization reaction with AIBN as an initiator and in the presence of n-octadecylmercaptan as a chain transfer agent. It has been shown that the molecular weight of the amphiphilic copolymers is determined by chain transfer to allyl glycidyl ether. Reinitiation occurs only with n-octadecylthio radicals formed as a result of the interaction of n-octadecylmercaptan with passive allyl radicals and primary degradation products of AIBN. With an increase in the proportion of allyl glycidyl ether, the size of aggregates formed by amphiphilic copolymers increases. The obtained nanocarriers are shown to be capable of dual loading of common antitumor drugs doxorubicin and paclitaxel. Covalent immobilization of doxorubicin occurs at the epoxy group of allyl glycidyl ether residues in the amphiphilic copolymer and is accompanied by a slight decrease in aggregate size. On the contrary, the loading of paclitaxel in the hydrophobic core of the aggregates leads to a significant increase in the aggregate size and broadening of the size distribution. The described loading strategy can be straightforwardly extended to dual loading of other amine-containing and hydrophobic drugs. The synthesized amphiphilic copolymer of N-vinyl-2-pyrrolidone and allyl glycidyl ether could be of interest for the co-loading and co-delivery of a wide range of pharmacological preparations and can lead to new, more efficient combination therapies with reduced cardiotoxicity.

Global Cancer Statistics 2020: GLOBOCAN Estimates of Incidence and Mortality Worldwide for 36 Cancers in 185 Countries

The nanomedicine revolution: Part 1: Emerging concepts

Benefits of Nanomedicine for Therapeutic Intervention in Malignant Diseases

Nanomedicine: Principles, Properties, and Regulatory Issues

Nanomedicine for drug delivery in South Africa: A protocol for systematic review

Designing hydrogels for controlled drug delivery

Effect of Polyethylene Glycol on Properties and Drug Encapsulation-Release Performance of Biodegradable/Cytocompatible Agarose-Polyethylene Glycol-Polycaprolactone Amphiphilic Co-Network Gels

Degradable/cytocompatible and pH responsive amphiphilic conetwork gels based on agarose-graft copolymers and polycaprolactone

Self-Assembly of Partially Alkylated Dextran-graft-poly[(2-dimethylamino)ethyl methacrylate] Copolymer Facilitating Hydrophobic/Hydrophilic Drug Delivery and Improving Conetwork Hydrogel Properties

Reactive compatibilizer mediated precise synthesis and application of stimuli responsive polysaccharides-polycaprolactone amphiphilic co-network gels

Nanosystems for drug delivery of coenzyme Q10

Recent advances in polymeric drug delivery systems

Recent advances in amphiphilic polymers for simultaneous delivery of hydrophobic and hydrophilic drugs

Synthesis and Multi-Responsive Self-Assembly of Cationic Poly(caprolactone)-Poly(ethylene glycol) Multiblock Copolymers

Micellization of synthetic and polysaccharides-based graft copolymers in aqueous media

Micellization of novel biocompatible thermo-sensitive graft copolymers based on poly(ε-caprolactone), poly(N-vinylcaprolactam) and poly(N-vinylpyrrolidone)

Reversible addition-fragmentation chain transfer synthesis and micellar characteristics of biocompatible amphiphilic poly(vinyl acetate)-graft-poly(N-vinyl-2-pyrrolidone) copolymers

Antitumoral Drug-Loaded Biocompatible Polymeric Nanoparticles Obtained by Non-Aqueous Emulsion Polymerization

The Design of Poly(lactide-co-glycolide) Nanocarriers for Medical Applications

Synthesis, self-assembly and in vitro cellular uptake kinetics of nanosized drug carriers based on aggregates of amphiphilic oligomers of N-vinyl-2-pyrrolidone

Nanosized carriers based on amphiphilic poly-N-vinyl-2-pyrrolidone for intranuclear drug delivery

Pharmaceutical assessment of polyvinylpyrrolidone (PVP): As excipient from conventional to controlled delivery systems with a spotlight on COVID-19 inhibition

In vitro blood compatibility and in vitro cytotoxicity of amphiphilic poly-N-vinylpyrrolidone nanoparticles

Kinetics and Mechanism of Synthesis of Carboxyl-Containing N-Vinyl-2-Pyrrolidone Telehelics for Pharmacological Use

Combination therapy in combating cancer

Use of liposomal doxorubicin for adjuvant chemotherapy of breast cancer in clinical practice

Lung cancer therapy using doxorubicin and curcumin combination: Targeted prodrug based, pH sensitive nanomedicine

Doxorubicin combined with Notch1-targeting siRNA for the treatment of gastric cancer

Long-term cure of soft tissue sarcoma with pegylated-liposomal doxorubicin after doxorubicin and ifosfamide failure

Doxorubicin-based chemotherapy for diffuse large B-cell lymphoma in elderly patients: Comparison of treatment outcomes between young and elderly patients and the significance of doxorubicin dosage

Doxorubicin treatment induces tumor cell death followed by immunomodulation in a murine neuroblastoma model

Investigation of the Therapeutic Effect of Doxorubicin Combined With Focused Shockwave on Glioblastoma

Doxorubicin pathways: Pharmacodynamics and adverse effects

Doxorubicin induces an extensive transcriptional and metabolic rewiring in yeast cells

Influence of doxorubicin on model cell membrane properties: Insights from in vitro and in silico studies

Doxorubicin induces cardiotoxicity through upregulation of death receptors mediated apoptosis in cardiomyocytes

Doxorubicin-induced cardiotoxicity: An update on the molecular mechanism and novel therapeutic strategies for effective management

Doxorubicin-loaded nanoparticles: New advances in breast cancer therapy

pH-responsive charge-reversal polymer-functionalized boron nitride nanospheres for intracellular doxorubicin delivery

Screening of metabolites in the treatment of liver cancer xenografts HepG2/ADR by psoralen-loaded lipid nanoparticles

Doxorubicin loaded polymeric nanoparticulate delivery system to overcome drug resistance in osteosarcoma

Doxorubicin-loaded PLGA nanoparticles-a systematic evaluation of preparation techniques and parameters. Mater

Immobilization and intracellular delivery of an anticancer drug using mussel-inspired polydopamine capsules

Doxorubicin-loaded iron oxide nanoparticles for glioblastoma therapy: A combinational approach for enhanced delivery of nanoparticles

Synthesis and Evaluation of Doxorubicin-Loaded Gold Nanoparticles for Tumor-Targeted Drug Delivery

Preparation of doxorubicin-loaded collagen-PAPBA nanoparticles and their anticancer efficacy in ovarian cancer

Anthracycline-induced cardiotoxicity and the cardiac-sparing effect of liposomal formulation

Transferrin-conjugated magnetic silica PLGA nanoparticles loaded with doxorubicin and paclitaxel for brain glioma treatment

Doxorubicin and paclitaxel-loaded lipid-based nanoparticles overcome multidrug resistance by inhibiting P-glycoprotein and depleting ATP

Co-delivery of doxorubicin and paclitaxel by reduction/pH dual responsive nanocarriers for osteosarcoma therapy

Paclitaxel: A review of adverse toxicities and novel delivery strategies

Magneto-sensitive and enzymatic hydrolysis-resistant systems for the targeted delivery of paclitaxel based on polylactide micelles with an external polyethylene oxide corona

Amphiphilic poly-N-vinyl-2-pyrrolidone: Synthesis, properties, nanoparticles

NMR study of poly(vinylpyrrolidone)/poly(ethylene oxide) blends

High-resolution solid-state 13 C nuclear magnetic resonance study on poly(vinyl alcohol)/poly(vinylpyrrolidone) blends

Spectrometric Identification of Organic Compounds

Reassessment of free-radical polymerization mechanism of allyl acetate based on end-group determination of resulting oligomers by MALDI-TOF-MS spectrometry

Optical properties of doxorubicin hydrochloride load and release on silica nanoparticle platform

Immobilization of dopamine on the copolymer of N-vinyl-2-pyrrolidone and allyl glycidyl ether and synthesis of new hydrogels

The Merck Index-An Encyclopedia of Chemicals, Drugs, and Biologicals

High Solubilization and controlled release of paclitaxel using thermosponge nanoparticles for effective cancer therapy

Release kinetics of paclitaxel and cisplatin from two and three layered gold nanoparticles

Tocopheryl succinate-based lipid nanospheres for paclitaxel delivery: Preparation, characters, and in vitro release kinetics

Institutional Review Board Statement: Not applicable.

Data Availability Statement: Data available upon request to the corresponding author.

The authors declare no conflict of interest.