key: cord-0027669-yp9wxj3x
authors: Sulaiman, Sulaiman; Ahmad, Shabir; Naz, Syeda Sohaila; Qaisar, Sara; Muhammad, Sayyar; Alotaibi, Amal; Ullah, Riaz
title: Synthesis of Copper Oxide-Based Nanoformulations of Etoricoxib and Montelukast and Their Evaluation through Analgesic, Anti-Inflammatory, Anti-Pyretic, and Acute Toxicity Activities
date: 2022-02-21
journal: Molecules
DOI: 10.3390/molecules27041433
sha: 21cbf084f9754a20e900430ec9ce8673bff8bcf4
doc_id: 27669
cord_uid: yp9wxj3x

Copper oxide nanoparticles (CuO NPs) were synthesized through the coprecipitation method and used as nanocarriers for etoricoxib (selective COX-2 inhibitor drug) and montelukast (leukotriene product inhibitor drug) in combination therapy. The CuO NPs, free drugs, and nanoformulations were investigated through UV/Vis spectroscopy, FTIR spectroscopy, XRD, SEM, and DLS. SEM imaging showed agglomerated nanorods of CuO NPs of about 87 nm size. The CE1, CE2, and CE6 nanoformulations were investigated through DLS, and their particle sizes were 271, 258, and 254 nm, respectively. The nanoformulations were evaluated through in vitro anti-inflammatory activity, in vivo anti-inflammatory activity, in vivo analgesic activity, in vivo anti-pyretic activity, and in vivo acute toxicity activity. In vivo activities were performed on albino mice. BSA denaturation was highly inhibited by CE1, CE2, and CE6 as compared to other nanoformulations in the in vitro anti-inflammatory activity. The in vivo bioactivities showed that low doses (5 mg/kg) of nanoformulations were more potent than high doses (10 and 20 mg/kg) of free drugs in the inhibition of pain, fever, and inflammation. Lastly, CE2 was more potent than that of other nanoformulations.

Nanotechnology is a field of research in which substances with one dimension less than 100 nm are studied [1] . The origin of nanotechnology can be traced back to the famous lecture of Nobel laureate Richard P. Feynman (1959) in which he stated that "There's Plenty of Room at the Bottom" [2, 3] . Nanotechnology has brought revolutionary changes in the field of science, technology, agriculture, energy, health, and other industrializations. These changes are related to the vast behaviors of nanoparticles [4] . Copper oxide nanoparticles (CuO NPs) have a large surface area and unique morphological structures which impart them with characteristic physical and chemical properties. They are widely applicable in nanomedicines [5] , PN junction diodes [6] , humidity sensing [7] , lithium-ion batteries [8] , organic synthesis [9] , antimicrobial activity, and biomedicine. CuO NPs show anti-bacterial and other anti-microbial activities [10] . adsorption of drugs. The peak of that drug was more prominent in nanoformula where its ratio was higher. The peaks of MT were prominent in CE5, CE6, and CE7; those of ET were prominent in CE1, CE2, and CE3. 

The synthesis of CuO NPs was also confirmed from FTIR analysis ( Figure 2 ) synthesis of CuO NPs was confirmed by the appearance of the characteristic peaks of NPs in specific regions. The vibrational mode of CuO NPs was revealed in the ran 500-700 cm −1 by the three absorption peaks. The stretching of Cu-O was indicated b peak at 525 cm −1 . The synthesis of CuO NPs was confirmed from the peaks at 525 cm − 602 cm −1 [42, 43] . Characteristic peaks of ET were observed at 772, 830, 1010, 1140 cm -1 responding to sulphone groups (−S=O)) [44] , 1598.9 cm -1 (C=N stretching vibration), 781.1, and 638.0 cm -1 (C-Cl stretching vibration) [45] [46] [47] . The characteristic peaks o were observed at 3396 (COOH stretching), 2980 (aromatic C-H stretching), 2925 (alip C-H stretching), 1610 (CC stretching), 1595 (CN stretching), 1497 (aliphatic C-H bend 1132 (C-O stretching), 1068 (aromatic C-Cl stretching), 837 (aromatic C-H bending) 697 (C-S stretching) [48] . Although a few of the ET and MT peaks disappeared in nan mulations, most of them appeared which shows their adsorption onto CuO NPs. 

The synthesis of CuO NPs was also confirmed from FTIR analysis ( Figure 2 ). The synthesis of CuO NPs was confirmed by the appearance of the characteristic peaks of CuO NPs in specific regions. The vibrational mode of CuO NPs was revealed in the range of 500-700 cm −1 by the three absorption peaks. The stretching of Cu-O was indicated by the peak at 525 cm −1 . The synthesis of CuO NPs was confirmed from the peaks at 525 cm −1 and 602 cm −1 [42, 43] . Characteristic peaks of ET were observed at 772, 830, 1010, 1140 cm −1 (corresponding to sulphone groups (−S=O)) [44] , 1598.9 cm −1 (C=N stretching vibration), 839.0, 781.1, and 638.0 cm −1 (C-Cl stretching vibration) [45] [46] [47] . The characteristic peaks of MT were observed at 3396 (COOH stretching), 2980 (aromatic C-H stretching), 2925 (aliphatic C-H stretching), 1610 (CC stretching), 1595 (CN stretching), 1497 (aliphatic C-H bending), 1132 (C-O stretching), 1068 (aromatic C-Cl stretching), 837 (aromatic C-H bending), and 697 (C-S stretching) [48] . Although a few of the ET and MT peaks disappeared in nanoformulations, most of them appeared which shows their adsorption onto CuO NPs.

The synthesis of CuO NPs was confirmed from UV/vis spectroscopy and FTIR spectroscopy, but it was further matched with JCPDS cards for XRD analysis. X-ray diffractometry (XRD) (Figure 3) [49] . The highly crystalline nature of the synthesized CuO NPs was confirmed from the sharp and well-defined reflections of the CuO NPs (JCPDS card no. 01-080-0076) [50] . CuO NPs have a monoclinic structure with a crystallite size of 13.7 nm. Characteristic peaks of ET were observed at 2θ = 11.9, 13.3, 16.5, 16.6, 18.2, 20.2, 22.8, 24.2, 26.5, 28.7, 29.4, 30.3, 32.5, 32.9, 34.8, 36.1, 39.1, 40.1, 41.2, 42, 42.9, 45.7, 47.6, 49.3 , and 53.2 [51] . These peaks were masked or disappeared in the nanoformulations. The disappearance of peaks in the nanoformulations shows that ET was attached or converted to an amorphous form. MT has no characteristic peak in the XRD spectrum due to its amorphous nature. The crystallite structure of CuO NPs, ET, and nanoformulations was calculated through the Scherrer formula (Table 1) . 

The synthesis of CuO NPs was confirmed from UV/vis spectroscopy and FTIR spectroscopy, but it was further matched with JCPDS cards for XRD analysis. X-ray diffractometry (XRD) (Figure 3) [49] . The highly crystalline nature of the synthesized CuO NPs was confirmed from the sharp and well-defined reflections of the CuO NPs (JCPDS card no. 01-080-0076) [50] . CuO NPs have a monoclinic structure with a crystallite size of 13.7 nm. Characteristic peaks of ET were observed at 2θ = 11.9, 13.3, 16 [51] . These peaks were masked or disappeared in the nanoformulations. The disappearance of peaks in the nanoformulations shows that ET was attached or converted to an amorphous form. MT has no characteristic peak in the XRD spectrum due to its amorphous nature. The crystallite structure of CuO NPs, ET, and nanoformulations was calculated through the Scherrer formula (Table 1) . 

The synthesized CuO NPs were investigated through SEM which showed agglomerated nanorods of CuO NPs of about 87 nm size ( Figure 4 ).

The sizes of CE1, CE2, and CE6 were investigated through dynamic light scattering (DLS). The particle sizes of CE1, CE2, and CE6 were 271, 258, and 254 nm, respectively ( Figure 5 ). 

The quantity or concentration of ET and MT in each nanoformulation was calculated by UV/Vis spectroscopy at a specific wavelength. The wavelength for quantification of ET was 235 nm while that of MT was 345 nm. However, the best wavelength for both drugs was 282 nm ( Figure 6 ). The absorbance of samples followed Beer-Lambert's law.

The quantities of ET and MT in 5 mg of each nanoformulations are given in Table 2 . The drug loading efficiency was about 70-75%, calculated through UV analysis by using the following Equation (1) (encapsulation efficiency (EE)):

Calibration Curve

The quantity of ET and MT in different nanoformulations with a mass of 5 mg was analyzed which shows a linear plot on the calibration curve. The results are given in Table 2 .

The sizes of CE1, CE2, and CE6 were investigated through dynamic light scattering (DLS). The particle sizes of CE1, CE2, and CE6 were 271, 258, and 254 nm, respectively ( Figure 5 ). 

The quantity or concentration of ET and MT in each nanoformulation was calculated by UV/Vis spectroscopy at a specific wavelength. The wavelength for quantification of ET was 235 nm while that of MT was 345 nm. However, the best wavelength for both drugs was 282 nm ( Figure 6 ). The absorbance of samples followed Beer-Lambert's law.

The quantities of ET and MT in 5 mg of each nanoformulations are given in Table 2 . The drug loading efficiency was about 70-75%, calculated through UV analysis by using the following Equation (1) (encapsulation efficiency (EE)):

Calibration Curve

The quantity of ET and MT in different nanoformulations with a mass of 5 mg was analyzed which shows a linear plot on the calibration curve. The results are given in Table  2 .

There was no interference from CuO nanoparticles in the nanoformulation of ET and MT.

The performance of the system was precise and suitable during the entire analysis of the nanoformulations of ET and MT. Validation of the analysis method for the quantification protocol is reported in the literature both for HPLC and UV/Vis spectroscopy [52] . The method of inhibition of BSA denaturation was used for in vitro anti-inflammatory activity. It is obvious that the denaturing of proteins leads to inflammation in the body. In this method, solutions of samples were added to a solution of BSA and were then incubated at 37 and 55 °C. The % inhibition of BSA denaturation was investigated through In vivo anti-inflammatory activity Inhibitory effect (%) 1h Inhibitory effect (%) 2h Inhibitory effect (%) 3h 

There was no interference from CuO nanoparticles in the nanoformulation of ET and MT.

The performance of the system was precise and suitable during the entire analysis of the nanoformulations of ET and MT. Validation of the analysis method for the quantification protocol is reported in the literature both for HPLC and UV/Vis spectroscopy [52] .

The method of inhibition of BSA denaturation was used for in vitro anti-inflammatory activity. It is obvious that the denaturing of proteins leads to inflammation in the body. In this method, solutions of samples were added to a solution of BSA and were then incubated at 37 and 55 • C. The % inhibition of BSA denaturation was investigated through UV/Vis spectroscopy at a fixed wavelength of 660 nm. The % inhibitory effect was calculated using the following Equation (2):

BSA denaturation was not inhibited in the negative control; therefore, inhibition of nanoformulations and standards was compared with it. Albeit the inhibitory effect of all nanoformulations was high; however, that of CE1, CE2, and CE6 was very high. Therefore, these nanoformulations were selected for further evaluation through in vivo studies. The results of % inhibition of BSA denaturation through nanoformulations are given in Table 3 [53] . 

In vivo anti-inflammatory activity was carried out through the carrageenan-induced hind paw edema method on albino mice at the Department of pharmacy, Quaid e Azam University, Islamabad. Mice of both sexes were used. Mice were treated with nanoformulations at a dose of 5 mg/kg body weight while doses of drugs were 10 mg/kg body weight through i.p. injection. They were treated with 0.1 mL of carrageenan 1% solution through the left hind paw and the paw volume was measured using a Plethysmometer. The % inhibition of inflammation was estimated from the decrease in the volume of the hind paw of mice. The % inhibition of inflammation was calculated using the following Equation (3) [54, 55] :

The inhibition of inflammation was low in the first hour but increased in the second and third hour. The % inhibitory effect of CE2 was high against inflammation, which is shown in Table 4 and Figure 6 . 

In vivo analgesic activity was performed in albino mice through the hot plate method. Mice were treated with doses of nanoformulations intraperitonially. They were placed on a hot plate at 55 • C for a 30 s cut-off time. The body movements of mice were keenly observed. The % inhibition of pain was measured from the time they tolerate on the hot plate. If pain is more inhibited, the mice will spend more time on the hot plate and vice versa. The % pain inhibition of CE2 was very high as compared to other nanoformulations which is shown in Table 5 and Figure 7 . 

In vivo anti-pyretic activity was carried out in albino mice through the yeast-induced pyrexia method. To induce pyrexia, 10 mL/kg of 20% yeast solution was intraperitoneally injected into mice. The body temperature of mice was measured before the treatment of yeast solution through a lubricated thermometer. Mice whose body temperature increased by 0.6 • C were selected for this activity. These mice were treated with nanoformulations intraperitoneally to inhibit pyrexia. The temperature of mice was measured for 4 h after each hour, which was controlled in the first hour by CE1, CE2, and CE3 as shown in Table 6 . The body temperature of mice is graphically represented in Figure 8 before and after treatment of the samples. The blue color indicates mice with normal body temperature (98.6 • F) while the orange color indicates mice with a high body temperature due to the treatment of yeast. The other four colors indicate the body temperature of mice following the treatment of samples.

vice versa. The % pain inhibition of CE2 was very high as compared to other nanoform lations which is shown in Table 5 and Figure 7 . 

In vivo anti-pyretic activity was carried out in albino mice through the yeast-indu pyrexia method. To induce pyrexia, 10 mL/kg of 20% yeast solution was intraperitone injected into mice. The body temperature of mice was measured before the treatmen yeast solution through a lubricated thermometer. Mice whose body temperature creased by 0.6 °C were selected for this activity. These mice were treated with nanoform lations intraperitoneally to inhibit pyrexia. The temperature of mice was measured f h after each hour, which was controlled in the first hour by CE1, CE2, and CE3 as sho in Table 6 . The body temperature of mice is graphically represented in Figure 8 

In vivo acute toxicity activity was carried out in albino mice through the median lethal dose (LD50) method. Different doses of nanoformulations were given to mice and observed for 24 h. The mice were normal when treated with doses of 5, 10, 25, 50, and 100 mg/kg body weight; however, died when the dose was increased to 200 mg/kg body weight. It was confirmed that the nanoformulations are acutely toxic at or above 200 mg/kg body weight. 

In vivo acute toxicity activity was carried out in albino mice through the median lethal dose (LD50) method. Different doses of nanoformulations were given to mice and observed for 24 h. The mice were normal when treated with doses of 5, 10, 25, 50, and 100 mg/kg body weight; however, died when the dose was increased to 200 mg/kg body weight. It was confirmed that the nanoformulations are acutely toxic at or above 200 mg/kg body weight.

Copper nitrate trihydrate (Cu(NO 3 ) 2 .3H 2 O), sodium hydroxide (NaOH), ethanol, ET, poly ethylene glycol (PEG, 6000), and polyvinyl acetate (PVA) were obtained from Merck (Darmstadt, Germany). UV/Vis spectra were recorded through Perkin Elmer (Waltham, MA, USA), UV/Vis spectrometer, Lambda 25. The FT-IR spectrum was performed on a JASCO FT/IR-6600 spectrometer. X-ray diffractometry (XRD) was conducted by using a D8 advance Bruker X-ray diffractometer equipped with a Cu anode (Bruker, Bremen, Germany).

CuO NPs were prepared through the coprecipitation method. Cu(NO 3 ) 2 .3H 2 O was used as a precursor salt. Cu(NO 3 ) 2 .3H 2 O salt was reduced to NaOH to prepare CuO NPs. A 100 mM solution of Cu(NO 3 ) 2 .3H 2 O was prepared in 100 mL deionized water. PEG-6000 was used as a surfactant in this synthetic work. A 100 mM solution of NaOH was very slowly added to the solution of Cu(NO 3 ) 2 .3H 2 O with constant stirring, which led to an increase in the pH of the solution. The addition of NaOH was stopped when the pH become basic. The appearance of blackish particles represented the synthesis of CuO NPs. The pH of the solution was maintained at pH 7 by washing with deionized water. The solution was filtered through Whatman filter paper and the residue was dried, ground, and then calcinated at 500 • C for 4 h [57] .

CuO NPs were used as nanocarriers for the ET and MT. Separate solutions of CuO NPs, ET, and MT were prepared in ethanol. The CuO NPs solution was sonicated for 1h to completely dissolve it. Different ratios of ET and MT solutions were added to the CuO NPs solution ( Table 7) . The solution was kept for 2 h post stirring. Then, the solution was sonicated for 2 h and then centrifuged at 6000 rpm for 1 h. The synthesized nanoformulations were dried at room temperature. Drug loading efficiency was 70-75%. PVA was used as an encapsulation agent for ET-and MT-conjugated CuO nanomaterials. Moreover, 2.5% PVA was added to the synthesized nanoformulation. 

The objective of the spectroscopic quantification of ET and MT was to determine their quantity in the nanoformulations. The quantification of ET and MT was carried out both simultaneously as well as separately for each drug. Although this may be carried out through HPLC or UV/Vis spectroscopy, here the analysis was performed through UV/Vis spectroscopy in the range of 200-800 nm. Therefore, different solutions of ET and MT were prepared in ethanol. Different ratios of ET and MT were added in different solutions. Separate and combined solutions were prepared for the drugs. The quantity of drugs was analyzed through UV/Vis spectroscopy for each solution [58] . The wavelength for quantification of ET was 235 nm while that of MT was 345 nm. However, the best wavelength for both drugs was 282 nm.

Five milligrams of ET was added to 20 mL of ethanol and sonicated for 30 min for complete dissolution. Five milligrams of MT was also added to 20 mL of ethanol in another beaker and completely dissolved. Then, different ratios of ET and MT (1:3, 1.5:2.5, 2:2, 2.5:1.5, and 3:1) were added to different beakers containing ethanol as the solvent and were completely dissolved through sonication. These solutions were diluted and analyzed through UV/Vis spectroscopy.

Solutions of CuO NPs were also prepared in ethanol. Then, solutions of ET and MT of the above ratios were added to a solution of CuO NPs in separate beakers. Next, the solution was sonicated and centrifuged at 6000 rpm. The supernatant was separated for each solution and was analyzed through UV/Vis spectroscopy. The difference in the quantity of ET as well as of MT, before and after addition to CuO nanoparticles, was calculated from analyzing the UV/Vis spectra [59] .

The FTIR analysis was carried out using the JASCO FT/IR-6600 spectrometer at a range of 400-4000 cm −1 . The samples were taken in solid powder form. For each sample, the values of % transmittance were obtained in the form of an FTIR spectrum. FTIR measures the vibrations of atoms, molecules, and functional groups which correspond to the matching frequency of the infrared beam. Therefore, the FTIR spectrum consists of the functional group region and fingerprint region [60] . The XRD spectra were performed through a D8 advance Bruker X-ray diffractometer (Bruker, Bremen, Germany) for the investigation of crystallite size, miller indices, and phase determination. The spectra were calculated in the range of 10-90 2θ. Samples were taken in solid powder form for XRD analysis. The spectra were matched with JCPDS cards for verification. In this analysis, the principle of Bragg's law (2dsinθ = nλ) was followed [61] . The crystal structure was calculated through Scherrer's formula (Ls = 0.92λ/βs cosθB). Zetasizer or dynamic light scattering (DLS) is the technique used for the determination of the size of particles in the suspension. DLS was performed in the Pharmacy Department, QAU, Islamabad. DLS can measure particle sizes ranging from 1 nm to 10 µm. The DLS analysis is based on the Brownian motion of particles. The Stokes-Einstein equation was used to calculate the particle size (D = kT/6rhR) [62] . Scanning electron microscopy (SEM) was used to investigate the size, shape, texture, and morphology of nanoparticles. SEM analysis was carried out at PINSTIC Islamabad. The samples were taken in solid powder form and investigated by SEM. The basic principle of SEM for the investigation and analysis of substances includes scanning under a beam of electrons. In SEM analysis, the range of voltage is about 30 keV.

The primary cause of inflammation is the denaturing of proteins in the body. Therefore, for measurement of the potency of drugs and nanoformulations in vitro, anti-inflammatory activity was performed through the inhibition of the bovine serum albumin (BSA) denaturing method. In this method, 5 mg/mL solution of each sample was prepared in DMSO and that of BSA (1% solution) was prepared in deionized water. Moreover, a 2 mg/mL solution of Diclofenac sodium was used as a standard. Then, 0.9 mL of BSA solution was added to a 0.1 mL solution of each sample and the standard. The solutions were incubated at 37 • C for 20 min and then at 55 • C for a further 20 min. These samples were evaluated through UV/Vis spectroscopy at 660 nm [63] .

Albino mice were obtained from the National Institute of Health, Islamabad, and an ethics approval letter was obtained from the ethics committee of Islamia College, Peshawar, Pakistan, for the proper handling and care of albino mice.

In vivo anti-inflammatory activity was performed on albino mice through the carrageenaninduced hind paw oedema method. The hind paw volume was measured before and after the treatment of carrageenan using a Plethysmometer (UGO BASILE 7140). Doses of samples were prepared in normal saline water and were administered through intraperitoneal (i.p.) injection as 5 mg/kg body weight. To induce swelling, 0.1 mL of 1% carrageenan solution was injected into the left hind paw of each mouse. The paw volume was measured after one hour of drug treatment. The drug was not given to the negative control group [64, 65] .

In vivo analgesic activity was carried out in albino mice using the hot-plate method of Eddy and Leimbach (1953) [66] . Mice of both sexes were used in this activity. The average weight of mice was 26-28 g. Doses of nanoformulations were given through i.p. injection as 5 mg/kg body weight. Then, mice were placed on a hot plate for a 35 s cut-off temperature. The temperature of the hot plate was adjusted to 55 • C [67].

The yeast-induced pyrexia method was used for evaluating in vivo anti-pyretic activity in albino mice. To induce pyrexia, 20% of aqueous brewer's yeast solution was subcutaneously injected into mice at a dose of 10 mL/kg body weight [68] . The body temperature of each mouse was measured through a rectal thermometer before the treatment of the yeast solution. After 18 h, the body temperature of mice was again measured. Mice whose body temperature increased by 0.6 • C were selected. Doses of nanoformulations and standards were given to each mouse through i.p. injection. The body temperature of mice was measured for 4 h [56] .

Present status and future prospects of jute in nanotechnology: A review

There's plenty of room at the bottom. In Feynman and Computation

There's Plenty of Room at the Top

An introduction to nanotechnology

A comprehensive review of green synthesis of copper oxide nanoparticles and their diverse biomedical applications

Opto-Electronic Characterization of Photocatalysts Based on p, n-Junction Ternary and Quaternary Mixed Oxides Semiconductors

Cost effective photocatalytic and humidity sensing performance of green tea mediated copper oxide nanoparticles

Hollow carbon spheres loaded with uniform dispersion of copper oxide nanoparticles for anode in lithium-ion batteries

Green biosynthesis of copper oxide nanoparticles using waste colocasia esculenta leaves extract and their application as recyclable catalyst towards the synthesis of

Advanced engineered nanomaterials for the treatment of wastewater

Novel applications of NSAIDs: Insight and future perspectives in cardiovascular, neurodegenerative, diabetes and cancer disease therapy

The burden of gastrointestinal and liver diseases

Nonsteroidal anti-inflammatory drug prescribing: Past, present, and future

Adverse effects of non-steroidal anti-inflammatory drugs (NSAIDs, aspirin and coxibs) on upper gastrointestinal tract

Natural product inhibitors of cyclooxygenase (COX) enzyme: A review on current status and future perspectives

Cardiovascular and gastrointestinal safety of NSAIDs: A systematic review of meta-analyses of randomized clinical trials

The risk of major NSAID toxicity with celecoxib, ibuprofen, or naproxen: A secondary analysis of the PRECISION trial

Engineering of Naproxen Loaded Polymer Hybrid Enteric Microspheres for Modified Release Tablets: Development, Characterization, in silico Modelling and in vivo Evaluation

Nonsteroidal anti-inflammatory drugs dampen the cytokine and antibody response to SARS-CoV-2 infection

Synthesis, characterization, COX1/2 inhibition and molecular modeling studies on novel 2-thio-diarylimidazoles

Optimization of pyrazole-based compounds with 1, 2, 4-triazole-3-thiol moiety as selective COX-2 inhibitors cardioprotective drug candidates: Design, synthesis, cyclooxygenase inhibition, anti-inflammatory, ulcerogenicity, cardiovascular evaluation, and molecular modeling studies

Perioperative use of nonsteroidal anti-inflammatory drugs and the risk of anastomotic failure in emergency general surgery

Type 2 diabetes mellitus and osteoarthritis

Soft materials as biological and artificial membranes

Effects of polyethylene glycol on the surface of nanoparticles for targeted drug delivery

Gut organoid as a new platform to study alginate and chitosan mediated PLGA nanoparticles for drug delivery

A Review on Various Analytical Methodologies for Etoricoxib

Evaluation of antioxidant and anticancer activity of copper oxide nanoparticles synthesized using medicinally important plant extracts

Antibacterial and photocatalytic activity of copper oxide nanoparticles synthesized using Solanum lycopersicum leaf extract

Synthesis and characterization of paclitaxel nanoparticles for drug delivery. Mater

Progress in nanomedicine-based drug delivery in designing of chitosan nanoparticles for cancer therapy

Development of Thiabendazole-Loaded Mesoporous Silica Nanoparticles for Cancer Therapy

Gastrointestinal and cardiovascular adverse events associated with NSAIDs

LLDPE composites with nanosized copper and copper oxides for water disinfection

Enhanced Antifouling Property of Polydimethylsiloxane-CuO nanocomposite in Marine Environment

Chick-Watson kinetics of virus inactivation with granular activated carbon modified with silver nanoparticles and/or copper oxide

Synthesis and antibacterial activity of graphene oxide decorated by silver and copper oxide nanoparticles

CuO nanoparticles: Synthesis, characterization, optical properties and interaction with amino acids

Preparation and characterization of copper oxide nanoparticles decorated carbon nanoparticles using laser ablation in liquid

A simple Ultraviolet spectrophotometric method for the determination of etoricoxib in dosage formulations

Identification, synthesis, isolation and spectral characterization of potential impurities of montelukast sodium

Infrared Spectra of Inorganic and Coordination Compounds

Green synthesis of copper oxide nanoparticles using gum karaya as a biotemplate and their antibacterial application

Preparation and evaluation of transdermal drug delivery system of etoricoxib using modified chitosan

Formulation and evaluation of solid lipid nanoparticle (SLN) based topical gel of etoricoxib

Preparation and characterization of etoricoxib-β-cyclodextrin complexes prepared by the kneading method

Solubility and dissolution enhancement of etoricoxib by solid dispersion technique using sugar carriers. ISRN Pharm

Preparation and evaluation of montelukast sodium loaded solid lipid nanoparticles

Green synthesis of CuO nanoparticles using Gloriosa superba L. extract and their antibacterial activity

Green synthesis of CuO nanoparticles using Cassia auriculata leaf extract and in vitro evaluation of their biocompatibility with rheumatoid arthritis macrophages (RAW 264.7)

Formulation development of mouth dissolving film of etoricoxib for pain management

Development and Validation of a RP-HPLC for the Simultaneous estimation of Atenolol and Hydrochlorothiazide in Pharmaceutical Dosage Forms

The in vitro anti-denaturation effects induced by natural products and non-steroidal compounds in heat treated (immunogenic) bovine serum albumin is proposed as a screening assay for the detection of anti-inflammatory compounds, without the use of animals, in the early stages of the drug discovery process

Evaluation of analgesic, anti-inflammatory, and antipyretic activity of leukotriene receptor antagonistmontelukast: An experimental study

Anti-inflammatory, antipyretic, analgesic, and antioxidant activities of Haloxylon salicornicum aqueous fraction

Pharmacological evidence favouring the use of Nauclea latifolia in malaria ethnopharmacy: Effects against nociception, inflammation, and pyrexia in rats and mice

Preparation and characterization of copper oxide nanoparticles synthesized via chemical precipitation method. Open Access Libr

Spectrophotometric quantification of Etoricoxib in bulk drug and tablets using hydrotropic agent

Determination of etoricoxib in human plasma using automated on-line solid-phase extraction coupled with LC-APCI/MS/MS. Química Nova

Quantum fourier-transform infrared spectroscopy in the fingerprint region

Effect of the lattice mismatch on threading dislocations in heteroepitaxial GaN layers revealed by X-ray diffraction

Exploring the validity of the Stokes-Einstein relation in supercooled water using nanomolecular probes

Invitro anti-inflammatory activity of methanol extract of Enicostemma axillare

Anti-inflammatory activity of Ruta graveolens Linn on carrageenan induced paw edema in wistar male rats

TRPA1 contributes to the acute inflammatory response and mediates carrageenan-induced paw edema in the mouse

Quantification of the analgesic activity of narcotic antagonists by a modified hot-plate procedure

Analgesic activity of Calotropis gigantea flower

Antipyretic properties of the aqueous and ethanol extracts of the leaves of Ocimum suave and Ocimum lamiifolium in mice

Antispasmodic activity of the fruits of Helicteres isora Linn

Acknowledgments: Authors wish to thank Princess Nourah bint Abdulrahman University Researchers Supporting Project number (PNURSP2022R33), Princess Nourah bint Abdulrahman University, Riyadh, Saudi Arabia, for financial support.

The authors declare that there is no conflict of interest.Sample Availability: Samples of the compounds are available with First author.

In vivo acute toxicity activity was carried out in albino mice through the median lethal dose (LD50) method [69] . Different doses of nanoformulations were given to mice and were observed for 24 h. The doses were 5, 10, 20, 50, 100, and 200 mg/kg body weight. The purpose of this activity was to measure the maximum amount of nanoformulations that were safe for organisms.

The studied bioactivities data are expressed as the standard error mean (SEM). The mean ± standard deviation (SD) was calculated for the data by the Equation (4):

CuO NPs were used as nanocarriers of ET (selective COX-2 inhibitor drug) and MT (leukotriene product inhibitor drug) in different ratios. CuO NPs were synthesized through the coprecipitation method and investigated using different tools. The synthesized nanoformulations were evaluated through in vitro and in vivo bioactivities which confirmed that these nanoformulations were more potent than those of parent drugs. The in vitro antiinflammatory activity indicated that CE1, CE2, and CE6 are of high potency; therefore, these three nanoformulations were further evaluated through in vivo bioactivities. The in vivo bioactivities showed that low doses (5 mg/kg) of nanoformulations were more potent than that of high doses (10 and 20 mg/kg) of free drugs.