key: cord-0023362-p3zkdr4s authors: khan, Dolat; Kumam, Poom; Watthayu, Wiboonsak title: A novel comparative case study of entropy generation for natural convection flow of proportional-Caputo hybrid and Atangana baleanu fractional derivative date: 2021-11-23 journal: Sci Rep DOI: 10.1038/s41598-021-01946-4 sha: 7262975fbbb123ac0f5122ed52563ae3911d780e doc_id: 23362 cord_uid: p3zkdr4s This article focused on the comparative study of entropy generation for natural convection flow of the newly proportional Caputo hybrid and Atangana baleanu fractional derivative. The governing equation is formed as the set of partial differential equations with the physical boundary conditions. The report of entropy generation is investigated for the first time for proportional–Caputo hybrid model and comparison are sorts out with generalized Atangana baleanu fractional derivative. The Bejan number is also compared for the mention fractional derivatives. Graphs show the impact of various factors on the minimization and maximizing of entropy production. The newly proportional Caputo hybrid operator has a good memory effect rather than Atangana baleanu fractional operator. www.nature.com/scientificreports/ and MHD for the Casson fluid model by applying the same idea of Caputo-Fabrizio derivatives. After this Sheikh et al. 30 and 31 add a comparative study of Caputo-Fabrizio and Atangana-Baleanu fractional derivative for Casson fluid model and application of nanofluids in the solar collector, respectively. After this Saqib et al. 32 report the entropy generation of fractionalized nanofluids. And find out the exact solution along with the porous medium. Any irreversible mass and heat transfer process, including body motion, fluid flow, heat exchange, anelastic deformation of solids, substances mixing or expanding, and any irreversible thermodynamic cycle, with thermal machines such as heat engines, power plants, heat pumps, and refrigerators produce entropy generation. The second law of thermodynamics is thought to be more appropriate for technical applications than the first. Because certain agents, such as internal pressure, vibration, rotating, and kinetic energy of molecules, allow heat energy to be lost that cannot be converted into work. Such damages in physical life cannot be recouped without any effort. These are classified as irreversibilities, and they must be decided within each framework. The dimensionless Bejan number and the entropy production rate can be used to improve the efficiency of a system. Bejann 33, 34 was the first to investigate device irreversibility impacts. He discovered that these effects are caused by three major factors: thermal, fluid inertia, and magnetic effects. By reducing irreversibilities, the best thermodynamical device designs may be accomplished. As a result, entropy optimization is thought to be the best method for assessing the system's results. We have compiled a list of useful articles on entropy production that have been scrutinized by several scholars and analysts [35] [36] [37] [38] [39] . More recently Mliki and Abbassi 40 report MHD natural convection heat transfer entropy generation in a hot incinerator for hybrid nano liquid. They find the numerical results by applying the lattice Boltzmann method. Analytically and numerically, Azhar et al. 41 examine the influence of the timefractional Caputo-Fabrizio derivative on the creation of entropy in a rotating channel with the temperature of the channel walls increasing exponentially and unstable hydromagnetic fractional Couette flow. In recent decay, Anderson and Ulness 42 present a newly proportional hybrid derivative operator as follows. This operator appears generally in control theory, and it has to do with the broad and growing theory of conformable derivatives. Recently Baleanu et al. 43 worked and present a new kind of fractional operator with power law kernel. Which is combination of proportional fractional operator and Caputo fractional operator in a single operator, known as constant proportional Caputo type fractional derivative. After this innovation many researchers are consider this new operator in their work. Asjad 44 apply successfully this novel fractional operator in fluid dynamic problem. After that Aleem et al. 45 extend this work in fluid dynamic and report heat transfer analysis of MHD Casson fluid through a porous medium with this operator. Where the Laplace transform method is used in both papers to obtain the exact solution. Further, Ahmad et al. 46 applied this operator for heat and mass transfer analysis of the slippage flow of viscous fluid with single-wall carbon nanotube. In 2021 this operator gets more attention, and many researchers are used for different studies, some of them are [47] [48] [49] [50] . Based on this motivation and Best of the author's knowledge and in comparison, to most earlier works, this paper has the following comparative advantages: 1. In this article, we are attempting to use the concept of constant proportional Caputo type fractional derivative, to investigate a novel, general and comparative report of entropy generation for natural convection. 2. This is the first attempt to investigate the entropy generation of natural convection flow for such a hybrid fractional model and compared with Atangana baleanu fractional derivative. 3. This investigation as an application of hybrid fractional derivative in fluid mechanics. 4. The mention fractional derivatives make generalized Bejan number and entropy generation for better curve fitting to experimental data. Let consider the natural convection unsteady flow of Newtonian fluid in y 1 > 0 region, where the plane surface is situated at y 1 = 0 with a static end at x = 0 . Initially, the fluid and surface are not moving with a constant temperature ∞ . After a period of time t 1 = 0 + , the fluid temperature level is increased to w . The equations defining the flow are approximated via the Boussinesq approximation as 45 . where u y 1 , t 1 ,ρ, µ, g, and β � are fluid velocity in x direction, density of the fluid, dynamic viscosity, gravitational acceleration and the volumetric coefficient of thermal expansion. Furthermore, the energy equation 45 is Initial and boundary conditions are as follows: u y 1 , 0 = 0, y 1 , 0 = ∞ for all y 1 ≥ 0, www.nature.com/scientificreports/ The following dimensionless variables are introduced: Using Eq. (7) into Eqs. (2) and (6), we get ( * is dropped for simplicity) where Solution via constant proportional Caputo fractional derivative. The proportional Caputo hybrid is define as 43 ; where K 1 and K 0 are functions of the variable t and the parameter α ∈ [0, 1] which satisfy the following conditions for all t ∈ R. To develop a constant proportional Caputo fractional model, the time derivative in unsteady terms of Eqs. (8) and (9). where CPC D α t () is constant proportional Caputo fractional derivative. Taking Laplace transform of Eqs. (9)- (11) and (16)-(17). We get Subject to the transform boundary conditions. u y 1 , 0 = 0, θ y 1 , 0 = 0 for all y 1 ≥ 0, Atangana-Baleanu fractional operator " AB D α t g(t) " is based on Mettang-Leffler function without Singular and local kernel which is defined as 51 . where N(α) is normalization function such that To develop AB fractional model, the time derivative in unsteady terms of Eqs. (8) and (9) becomes. Taking Laplace transform of Eqs. (30) (31) , and solved we get, www.nature.com/scientificreports/ The inverse Laplace of Eqs. (32) and (33) is find out numerically and plotted graphically. Wastage or loss of useful power in thermodynamical systems, as well as how to limit damage, becomes an important and difficult task for scientists and engineers. For that way entropy generation is playing an important role, for our problem, it is given by: where Br and is the dimensionless Brinkman number and temperature difference, denoted by, The expression in Eq. (34) can be written as the amount of entropy generation caused by heat transfer ( N H ) and local entropy generation due to fluid friction irreversibility N F . Additionally, the Bejan number B e is known as, Bejan number has a significant reputation to give an idea that is affected because of fluid fraction and magnetic field control over the heat transfer. " This work focused on the application of new developed fractional derivative that is proportional Caputo hybrid derivative for entropy generation natural in convection flow through a vertical plate. Furthermore, the results are compared with Atangana baleanu fractional derivative graphically. The existing model is converted to a proportional Caputo hybrid derivative model and solve via Laplace transform technique. Mathcad-15 software was used to generate some numerical simultaneous findings. We receive different findings for the profile of fluid temperature profile, Bejan number, velocities, and entropy generation based on these graphs, which are briefly addressed in the next paragraph. Figure 1 is reporting the graphical analysis of proportional Caputo hybrid derivative parameter α on velocity, temperature, entropy generation and Bejan number for less time t 1 = 0.5 . It is shown from the graphs that the increase of fractional parameter α lead to decrease the temperature, velocity of the fluid and entropy generation but increase the Bejan number near to the plate and revised after some distance. Because the thickness of heat and momentum boundary layers is inversely proportional to α , this is the case due to which the decrease is occurs in these three profiles while due to this fact the Bejan number is increase. For the sake of justification, the o obtained results is identical to Ali et al. 52 for fractional parameter. The Prandtl Number Pr is a dimensionless number that approximates the momentum-to-thermal diffusivity ratio. In heat transport and free and forced convection computations, the Prandtl Number is frequently utilized. The consequence of Pr is graphically highlighted in Fig. 2 . It is clear from figure that the greater value of Pr decrease the entropy generation, temperature and velocity profile while increase the Bejan number near to the plate and far away the behaviour is revised. Physically is used in calculations of heat transfer between a moving fluid and a solid body which is equal to Pr = µC p K . Which is clearly that Pr ∝ 1 K , a greater Pr decrease in the thermal conductivity of the fluid as a result temperature profile decreases due to which a decrease is occurring in velocity and entropy generation while the Bejan number increase. In fluid dynamics and heat transfer, the Grashof number is a numerical representation of the ratio of buoyancy to a viscous force exerted on a fluid. It usually occurs in the study of natural convection situations. The consequence of Gr is presented in Fig. 3 . Entropy generation and velocity profiles are increasing while the decrease occurs in Bejan number with increasing of Gr . Physically, the fluid motion is supported by more bouncy for greater Gr . Due to which the above phenomena occur. Furthermore, a rise in the values of Gr implies enhancement in the temperature of the plate, which leads to reduce the internal friction and intensify the gravity effects. The great quantity of heat through viscous dissipation and vice versa is generated by the Brickman number, which leads to raising the entropy generation due to the greater value of Br . And decrease the Bejan number, this phenomenon is highlighted in Fig. 4 . The consequence of entropy generation and Bejan number against is reported in Fig. 5 . Physically, is directly proportional to temperature difference, the greater value of leads to increase the temperature difference as a result the entropy generation is decrease while due to this reason the Bejan number is increase. Figure 6 is plotted for the comparing of fractional models with classical model. The figure is plotted both newly proportional Caputo hybrid and Atangana baleanu fractional parameter α = 0.3 and t 1 = 0.5 . While for both fractional models, when α → 1 it reduces to the classical model. It is clear for all . A novel report is reported of newly proportional Caputo hybrid fractional model of entropy generation for natural convection flow through vertical plate. The problem is formulated by partial differential equations with suitable boundary condition and then transform to Caputo hybrid fractional model. The generalized model is solved by applying the Laplace integral transform. The solution is compared with Atangana baleanu fractional model graphically, all graphical results are plotted via Mathcad-15 software and discussed in detail. This study's noteworthy findings are as follows: • For t 1 = 0.5 , entropy generation, temperature and velocity of the fluid is reduced with the increase of α . While Bejan number shoes the opposite behaviour. Lastly, I endorse some suggestion to the readers as bellow. • The following idea can be extended in different geometry of calendrical coordinate. • One of the possibility is to consider the same idea for different types of fluid with different boundary conditions. • The idea is extended to incorporating the concentration equation with chemical reaction for many nanofluid and hybrid nanofluid. www.nature.com/scientificreports/ Data of this study will be made available from the corresponding author on reasonable request. www.nature.com/scientificreports/ An introduction to fractional calculus Fractional calculus: a mathematical tool from the past for present engineers New trends in nanotechnology and fractional calculus applications (p. C397) Fractional calculus models of complex dynamics in biological tissues Fractional Calculus and Waves in Linear Viscoelasticity: An Introduction to Mathematical Models A new collection of real world applications of fractional calculus in science and engineering Fractional calculus Applications of Fractional Calculus in Physics Mathematical Economics: Application of Fractional Calculus Fractional calculus models of magnetic resonance phenomena: relaxation and diffusion Fractional Calculus and Its Applications The Fractional Calculus Theory and Applications of Differentiation and Integration to Arbitrary Order Remarks on fractional derivatives An analytic approach to a class of fractional differential-difference equations of rational type via symbolic computation On the notion of fractional derivative and applications to the hysteresis phenomena The Weyl fractional calculus Properties of the Katugampola fractional derivative with potential application in quantum mechanics On the ψ-Hilfer fractional derivative Applications of new time and spatial fractional derivatives with exponential kernels Integral balance methods for Stokes' first equation described by the left generalized fractional derivative Second-grade fluid model with Caputo-Liouville generalized fractional derivative A fractional differential equation model for the COVID-19 transmission by using the Caputo-Fabrizio derivative A fractional Bank competition model in Caputo-Fabrizio derivative through Newton polynomial approach An application of the Atangana-Baleanu fractional derivative in mathematical biology: a three-species predator-prey model Modeling and analysis of the fractional HBV model with Atangana-Baleanu derivative Application of Caputo-Fabrizio derivatives to MHD free convection flow of generalized Walters'-B fluid model Analysis of the heat and mass transfer in the MHD flow of a generalized Casson fluid in a porous space via non-integer order derivatives without a singular kernel A comparative study of Atangana-Baleanu and Caputo-Fabrizio fractional derivatives to the convective flow of a generalized Casson fluid On the applications of nanofluids to enhance the performance of solar collectors: a comparative analysis of Atangana-Baleanu and Caputo-Fabrizio fractional models Entropy generation in different types of fractionalized nanofluids. Arab A study of entropy generation in fundamental convective heat transfer Method of entropy generation minimization, or modeling and optimization based on combined heat transfer and thermodynamics Irreversibility analysis in unsteady flow over a vertical plate with arbitrary wall shear stress and ramped wall temperature Entropy generation in MHD conjugate flow with wall shear stress over an infinite plate: exact analysis Entropy generation and MHD natural convection of a nanofluid in an inclined square porous cavity: effects of a heat sink and source size and location. Chin Simulation of natural convection and entropy generation of MHD non-Newtonian nanofluid in a cavity using Buongiorno's mathematical model Entropy generation in MHD Maxwell nanofluid flow with variable thermal conductivity, thermal radiation, slip conditions, and heat source Entropy generation of MHD natural convection heat transfer in a heated incinerator using hybridnanoliquid Entropy generation due to fractional Couette flow in a rotating channel with exponential heating of walls Newly defined conformable derivatives On a fractional operator combining proportional and classical differintegrals Novel fractional differential operator and its application in fluid dynamics Heat transfer analysis of magnetohydrodynamic Casson fluid through a porous medium with constant proportional Caputo derivative Application of novel fractional derivative to heat and mass transfer analysis for the slippage flow of viscous fluid with single-wall carbon nanotube subject to Newtonian heating Ulam stability and existence results for fractional differential equations with hybrid proportional-Caputo derivatives A hybrid fractional COVID-19 model with general population mask use: numerical treatments Analysis and applications of the proportional Caputo derivative Influence of hybrid nanofluids and heat generation on coupled heat and mass transfer flow of a viscous fluid with novel fractional derivative New fractional derivatives with nonlocal and non-singular kernel: theory and application to heat transfer model Power law memory of natural convection flow of hybrid nanofluids with constant proportional Caputo fractional derivative due to pressure gradient The authors acknowledge the financial support provided by the Center of Excellence in Theoretical and Computational Science (TaCS-CoE), KMUTT. Moreover, this research project is supported by Thailand Science Research and Innovation (TSRI) Basic Research Fund: Fiscal year 2022. D.K. formulated the problem. D.K. solved the problem. P.K. performed the investigations. W.W. wrote the paper. The authors declare no competing interests. Correspondence and requests for materials should be addressed to P.K. Publisher's note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http:// creat iveco mmons. org/ licen ses/ by/4. 0/.