key: cord-0019705-djkxfseq
authors: Arshad, Uzma; Ahmed, Sibtain; Shafiq, Nusrat; Ahmad, Zaheer; Hassan, Aqsa; Akhtar, Naseem; Parveen, Shagufta; Mehmood, Tahir
title: Structure-Based Designing, Solvent Less Synthesis of 1,2,3,4-Tetrahydropyrimidine-5-carboxylate Derivatives: A Combined In Vitro and In Silico Screening Approach
date: 2021-07-22
journal: Molecules
DOI: 10.3390/molecules26154424
sha: 04d2aa8f4023de076b77b2da9f46a5b6ad2b350d
doc_id: 19705
cord_uid: djkxfseq

Objective: In this study, small molecules possessing tetrahydropyrimidine derivatives have been synthesized having halogenated benzyl derivatives and carboxylate linkage. As previously reported, FDA approved halogenated pyrimidine derivatives prompted us to synthesize novel compounds in order to evaluate their biological potential. Methodology: Eight pyrimidine derivatives have been synthesized from ethyl acetoacetate, secondary amine, aromatic benzaldehyde by adding catalytic amount of CuCl(2)·2H(2)O via solvent less Grindstone multicomponent reagent method. Molecular structure reactivity and virtual screening were performed to check their biological efficacy as an anti-oxidant, anti-cancer and anti-diabetic agent. These studies were supported by in vitro analysis and QSAR studies. Results: After combined experimental and virtual screening 5c, 5g and 5e could serve as lead compounds, having low IC(50) and high binding affinity.

Heterocyclic compound chemistry has revolutionized the modern and versatile medicinal chemistry [1] . These heterocyclic compounds have a very expansive effect on human life and influence heterogeneous fields like medicine, polymer science, agronomy and various chemical industries [2] . These heterogeneous compounds, constituted of dihydropyrimidinones (DHPMs), have gained the much attention after the discovery of DNA and RNA bases having purines and pyrimidines as core group [3] . DHPMs mode of action is evident from the formation of H-bonding along with nucleotides like uracil, thymine, cytosine, adenine and guanine in both DNA and RNA [4] . This class of heterocyclic synthetic compounds contains many naturally occurring therapeutic drugs like quinine, emetine, dibucaine, morphine and reserpine, as shown in Figure 1 [5, 6] .

DHPMs become part of many medicinal and therapeutic agents which interact with DNA and RNA of the infected cells and terminate the cell division of infected cells by seizing DNA and RNA biosynthesis of these cells, as these DHPMs are structurally related to nucleotide bases of infected cells [7] . Pyrimidine scaffold is of great interest for researchers and versatile capability of potentials. Several biologically active functional moieties contributed to the potential of pyrimidine derivatives. Based on the biologically active functional groups, currently synthesized Pyrimidine-scaffold are shown in Figure 2 [8, 9] . Due to this captivating biological and pharmaceutical utilizations, chemists are generally DHPMs become part of many medicinal and therapeutic agents which interact with DNA and RNA of the infected cells and terminate the cell division of infected cells by seizing DNA and RNA biosynthesis of these cells, as these DHPMs are structurally related to nucleotide bases of infected cells [7] . Pyrimidine scaffold is of great interest for researchers and versatile capability of potentials. Several biologically active functional moieties contributed to the potential of pyrimidine derivatives. Based on the biologically active functional groups, currently synthesized Pyrimidine-scaffold are shown in Figure 2 [8, 9] . Due to this captivating biological and pharmaceutical utilizations, chemists are generally interested in the structural modification of the basic nucleus of DHPMs. Regarding the above discussion we have synthesized a series of DHPMs having pyrido [2,3-d] pyrimidine structural framework. DHPMs become part of many medicinal and therapeutic agents which interact with DNA and RNA of the infected cells and terminate the cell division of infected cells by seizing DNA and RNA biosynthesis of these cells, as these DHPMs are structurally related to nucleotide bases of infected cells [7] . Pyrimidine scaffold is of great interest for researchers and versatile capability of potentials. Several biologically active functional moieties contributed to the potential of pyrimidine derivatives. Based on the biologically active functional groups, currently synthesized Pyrimidine-scaffold are shown in Figure 2 [8, 9] . Due to this captivating biological and pharmaceutical utilizations, chemists are generally interested in the structural modification of the basic nucleus of DHPMs. Regarding the above discussion we have synthesized a series of DHPMs having pyrido [2,3-d] pyrimidine structural framework. Generally, in the past conventional methods for the synthesis of heterocyclic compounds were applied which was less efficient, time consuming and provided less yield [10] . Following the inception of the green chemistry approach in 1991, it is highly recommendable to synthesize the compounds according to the principles of green chemistry [11] . Therefore, in order to minimize these losses, a fuel efficient, innocuous, having no byprod-uct or side reactions, eco-friendly Grindstone technique has been employed [10] . In medicinal chemistry, fluorination of heterocyclic compounds has much impact on drug stability as in the case of drug absorption, distribution and mechanism. Moreover, owing to the small size, greater electrostatic interactions due to increased binding affinity, less polarizability, and high dipoles C-bond act as good hydrogen bonding recipient and are better involved in resonance [12] . Biological aspects of pyrimidine derivatives containing fluorine as substituent have been advent from its commercially available drugs as these drugs are included in the FDA approved drug list of 2018, shown in Figure 3 [13] . In accordance with the above discussion, mono substituted fluoropyrimidine derivatives have been synthesized.

Generally, in the past conventional methods for the synthesis of heterocyclic compounds were applied which was less efficient, time consuming and provided less yield [10] . Following the inception of the green chemistry approach in 1991, it is highly recommendable to synthesize the compounds according to the principles of green chemistry [11] . Therefore, in order to minimize these losses, a fuel efficient, innocuous, having no byproduct or side reactions, eco-friendly Grindstone technique has been employed [10] . In medicinal chemistry, fluorination of heterocyclic compounds has much impact on drug stability as in the case of drug absorption, distribution and mechanism. Moreover, owing to the small size, greater electrostatic interactions due to increased binding affinity, less polarizability, and high dipoles C-bond act as good hydrogen bonding recipient and are better involved in resonance [12] . Biological aspects of pyrimidine derivatives containing fluorine as substituent have been advent from its commercially available drugs as these drugs are included in the FDA approved drug list of 2018, shown in Figure 3 [13] . In accordance with the above discussion, mono substituted fluoropyrimidine derivatives have been synthesized. 

We have reported the synthesis of tetrahydrpyrimidine derivatives from the reaction mixture of urea/thiourea, substituting benzaldehydes and ethyl acetoacetate utilizing CuCl2·2H2O as catalyst. Under these conditions, excellent yield and rapid products were obtained. Moreover, this synthetic method was advantageous over the conventional methods owing to its less solvent, economic, less time consuming and possessing single step properties [14, 15] .

Targeted synthesized compounds were characterized to confirm their structures through the NMR spectral data (Spectra in Supplementary Materials).

The 1 H-and 13 C-NMR spectral data of all compounds 5a-h displayed characteristic peaks by which we were able to identify the corresponding compounds (Tables 1 and 2 ). 

We have reported the synthesis of tetrahydrpyrimidine derivatives from the reaction mixture of urea/thiourea, substituting benzaldehydes and ethyl acetoacetate utilizing CuCl 2 ·2H 2 O as catalyst. Under these conditions, excellent yield and rapid products were obtained. Moreover, this synthetic method was advantageous over the conventional methods owing to its less solvent, economic, less time consuming and possessing single step properties [14, 15] .

Targeted synthesized compounds were characterized to confirm their structures through the NMR spectral data (Spectra in Supplementary Materials).

The 1 H-and 13 C-NMR spectral data of all compounds 5a-h displayed characteristic peaks by which we were able to identify the corresponding compounds (Tables 1 and 2 ). A series of synthetic compounds 5a-5h were subjected to radical scavenging antioxidant, alpha-amylase inhibitory anti-diabetic and MTT cytotoxicity assay. It is manifested from the activity results that all our target molecules 5a-h were observed to possess good to moderate activity in comparison to standards used. These compounds have IC50 values in the range of 6.261-2358 M for scavenging radicals, 6.539-11.27 µM for the enzymatic inhibition of alpha-amylase and 5.351-18.69 µg/mL for suppressing the cytotoxicity of HepG2 cell line. Figures 4-6 represents the graphical data of IC50 values obtained by GraphPad Prism 8. As it was evident from rational drug design scheme shown in Figures 7-9 that the synthetic compound is comprised of pyrimidine derivative along with oxo and thio groups, ester linkage with methyl moiety, benzyl ring with halogen group consisting of fluoro-and chloro-substitutions at ortho, meta and para position with respect to pyrimidine ring moiety. All these moieties play important role in regulating the biological potential, especially the position of halogenated derivatives greatly affect the biological potential of these compounds 5a-5h. A series of synthetic compounds 5a-5h were subjected to radical scavenging antioxidant, alpha-amylase inhibitory anti-diabetic and MTT cytotoxicity assay. It is manifested from the activity results that all our target molecules 5a-h were observed to possess good to moderate activity in comparison to standards used. These compounds have IC 50 values in the range of 6.261-2358 M for scavenging radicals, 6.539-11.27 µM for the enzymatic inhibition of alpha-amylase and 5.351-18.69 µg/mL for suppressing the cytotoxicity of HepG2 cell line. Figures 4-6 represents the graphical data of IC 50 values obtained by GraphPad Prism 8. As it was evident from rational drug design scheme shown in Figures 7-9 that the synthetic compound is comprised of pyrimidine derivative along with oxo and thio groups, ester linkage with methyl moiety, benzyl ring with halogen group consisting of fluoro-and chloro-substitutions at ortho, meta and para position with respect to pyrimidine ring moiety. All these moieties play important role in regulating the biological potential, especially the position of halogenated derivatives greatly affect the biological potential of these compounds 5a-5h. According to limited structure activity relationship, all the meta substituted chloro and fluoro derivatives on benzyl ring attached to pyrimidine moiety showed good inhibitory concentration values in comparison to other ortho and para substitution. Compound 5c (IC50 = 6.261 µM) having fluoro substitution at para position with respect to pyrimidine moiety having oxo group showed best radical scavenging activity [16] Compound 5g with (IC50 = 6.539 µM) having meta substituted chloro benzyl derivative attached with pyrimidine ring with oxo linkage showed highest inhibitory potential for alpha amylase of all synthesized compounds which is attributed to its electron withdrawing effect [16] . Overall conclusion showed by Figure 8 . Cytotoxicity evaluations lead us to the conclusion that compound 5e with meta substituted fluoro derivatives having thio linkage possessed the highest IC50 compared to control, as shown in Figure 10 . All this structure activity relationship provided us with the conclusion that meta substitution of halogenated derivatives with either oxo or thio linkages provided promising results after in vitro analysis [16] [17] [18] [19] [20] . According to limited structure activity relationship, all the meta substituted chloro and fluoro derivatives on benzyl ring attached to pyrimidine moiety showed good inhibitory concentration values in comparison to other ortho and para substitution. Compound 5c (IC 50 = 6.261 µM) having fluoro substitution at para position with respect to pyrimidine moiety having oxo group showed best radical scavenging activity [16] . Compound 5g with (IC 50 = 6.539 µM) having meta substituted chloro benzyl derivative attached with pyrimidine ring with oxo linkage showed highest inhibitory potential for alpha amylase of all synthesized compounds which is attributed to its electron withdrawing effect [16] . Overall conclusion showed by Figure 8 . Cytotoxicity evaluations lead us to the conclusion that compound 5e with meta substituted fluoro derivatives having thio linkage possessed the highest IC 50 compared to control, as shown in Figure 10 . All this structure activity relationship provided us with the conclusion that meta substitution of halogenated derivatives with either oxo or thio linkages provided promising results after in vitro analysis [16] [17] [18] [19] [20] . Molecular docking studies revealed the best fit modes of compounds 5a-h by docking with tyrosine kinase. Results obtained after docking analysis provide us with promising compound 5c, based on the best binding affinity value in comparison to standard (all data in supplementary materials) [21] . 3D and 2D interface of best fit poses as ligand into receptor site of tyrosine kinase were visualized in Figure 10A -E [22] [23] [24] [25] . 

The most favorable and best fit binding modes of 5a-h with glucokinase showed that their docking score range from −129.805 to −98.995 kcal/mol, while standard drug docking score is −95.8957 kcal/mol. Glucokinase binding pocket showed best affinity with chlorosubstituted compound 5g, which revealed that compound 5g has the capacity for enzymatic activity inhibition [24, 26] (Figure 11A -E). 

Molecular docking studies revealed the best fit modes of compounds 5a-h by docking with tyrosine kinase. Results obtained after docking analysis provide us with promising compound 5c, based on the best binding affinity value in comparison to standard (all data in supplementary materials) [21] . 3D and 2D interface of best fit poses as ligand into receptor site of tyrosine kinase were visualized in Figure 10A -E [22] [23] [24] [25] .

The most favorable and best fit binding modes of 5a-h with glucokinase showed that their docking score range from −129.805 to −98.995 kcal/mol, while standard drug docking score is −95.8957 kcal/mol. Glucokinase binding pocket showed best affinity with chloro-substituted compound 5g, which revealed that compound 5g has the capacity for enzymatic activity inhibition [24, 26] (Figure 11A -E). Molecular docking studies revealed the best fit modes of compounds 5a-h by docking with tyrosine kinase. Results obtained after docking analysis provide us with promising compound 5c, based on the best binding affinity value in comparison to standard (all data in supplementary materials) [21] . 3D and 2D interface of best fit poses as ligand into receptor site of tyrosine kinase were visualized in Figure 10A -E [22] [23] [24] [25] . 

The most favorable and best fit binding modes of 5a-h with glucokinase showed that their docking score range from −129.805 to −98.995 kcal/mol, while standard drug docking score is −95.8957 kcal/mol. Glucokinase binding pocket showed best affinity with chlorosubstituted compound 5g, which revealed that compound 5g has the capacity for enzymatic activity inhibition [24, 26] (Figure 11A -E). Compound 5g, owing to its oxo substitution, has two hydrogen bonding interactions, namely from the side 3-NH and with oxygen of ester linkage with residues such as Asp409 and Ser411. MolDock score and number of hydrogen bonding interactions of 5g is in accordance with lowest IC 50 value of this compound (all data in supplementary materials) [24] .

Compounds 5a-h showed significantly better MolDock scores than standard 5-fluorouracil when docked with human serum albumin (3B9L), indicating a good binding affinity (all data in supplementary materials). Results of docking revealed that compound 5c shows the best MolDock score of −126.322 kcal/mol. Compound 5c forms hydrogen bonds from oxygen of ester linkage with Ser454 and Arg197, respectively. Oxygen of ester linked carbonyl form hydrogen bonds with Lys199 and Arg197 shown in Figure 12A -E [24, 27] . Compound 5g, owing to its oxo substitution, has two hydrogen bonding interactions, namely from the side 3-NH and with oxygen of ester linkage with residues such as Asp409 and Ser411. MolDock score and number of hydrogen bonding interactions of 5g is in accordance with lowest IC50 value of this compound (all data in supplementary materials) [24] .

Compounds 5a-h showed significantly better MolDock scores than standard 5-fluorouracil when docked with human serum albumin (3B9L), indicating a good binding affinity (all data in supplementary materials). Results of docking revealed that compound 5c shows the best MolDock score of −126.322 kcal/mol. Compound 5c forms hydrogen bonds from oxygen of ester linkage with Ser454 and Arg197, respectively. Oxygen of ester linked carbonyl form hydrogen bonds with Lys199 and Arg197 shown in Figure 12A -E [24, 27] . 

The average RMSD descriptor of all the docked compounds were calculated to corroborate their stability in biological system [28] [29] [30] . As the justified threshold for RMSD calculation is 2 Å, its mean average RMSD value of all the complexes less than this threshold provides us with the proof that our docking process is validated, as having RMSD for anti-cancer docking protocol 2.0 Å, for anti-diabetic 1.35 Å and for anti-oxidant 0.71 Å [31] [32] [33] [34] . Redocked ligand and co-crystal structure's native ligand superimposed images are shown in Figure 13A -C [35] [36] [37] . 

The average RMSD descriptor of all the docked compounds were calculated to corroborate their stability in biological system [28] [29] [30] . As the justified threshold for RMSD calculation is 2 Å, its mean average RMSD value of all the complexes less than this threshold provides us with the proof that our docking process is validated, as having RMSD for anticancer docking protocol 2.0 Å, for anti-diabetic 1.35 Å and for anti-oxidant 0.71 Å [31] [32] [33] [34] . Redocked ligand and co-crystal structure's native ligand superimposed images are shown in Figure 13A Contour diagrams of HOMO LUMO are significant for the determination of chemical reaction mechanism. For this purpose, these parameters must be calculated precisely [38] . Contour diagrams of FMOs comprising the HOMO (highest occupied molecular orbitals) and the LUMO (lowest unoccupied molecular orbitals) in studied compounds are calculated and optimized geometry of structures along with numbering system, and the vector of the dipole moment is shown in Figure 14A ,B and Table 3 . Contour diagrams of HOMO LUMO are significant for the determination of chemica reaction mechanism. For this purpose, these parameters must be calculated precisely [38 Contour diagrams of FMOs comprising the HOMO (highest occupied molecular orbitals and the LUMO (lowest unoccupied molecular orbitals) in studied compounds are calcu lated and optimized geometry of structures along with numbering system, and the vecto of the dipole moment is shown in Figure 14A ,B and Table 3 . According to Table 3 , the first computational parameter is EHomo. High value of Homo predicts that the compound has good electron donor ability, and can give electrons to the Table 3 , the first computational parameter is E Homo . High value of Homo predicts that the compound has good electron donor ability, and can give electrons to the appropriate acceptor molecule, resulting in good biological activity associated with increasing value of E Homo [39] . Thus, activity ranking with increasing E Homo value is as follows:

Compound 5d > Compound 5f> Compound 5e > Compound 5h > Compound 5a > Compound 5c > Compound 5b > Compound 5g

The second computational parameter is E Lumo . The low value of a compound predicts that it can easily accept electrons from a molecule, thus resulting in the increase of biological activity with decreasing E Lumo values. Thus, according to Table 3 , the increase in biological activity of compounds is as follows:

The third parameter is the energy gap ∆E between HOMO and LUMO. A smaller energy gap is associated with a more reactive molecule that is kinetically less stable. Thus, biological activity of synthesized compounds increases with decrease in the energy gap. The order of ranking should be [38, 40, 41] :

Compound 5f > Compound 5e > Compound 5h > Compound 5d > Compound 5a > Compound 5c ≈ Compound 5g > Compound 5b

Another property associated with FMOs is chemical softness and hardness. According to HSAB approximation, hard molecules have large energy gaps and soft molecules have smaller energy gaps. As the biological system consists of enzymes and cells which are soft, soft molecules tend to coordinate more easily. Thus, increasing biological activity of compounds according to the global softness criterion is as follows [38] :

Compound 5h > Compound 5b > Compound 5c ≈ Compound 5g > Compound 5a > Compound 5d > Compound 5e > Compound 5f

Electronegativity (X), electrophilicity index (ω), Dipole Moment (µ), Electronic energy (E), Ionization Potential (I), Chemical Potential (CP), Nucleophilicity Index (N) and electronic charges (∆N max ) are reactivity parameters. Table 3 , E shows the calculated values.

A low value of electronegativity (X) or higher value of chemical potential (CP) refers to the electron delocalization. This means that a molecule can easily coordinate with a biological system by forming bonds. According to this criterion, increasing biological ranking should be as follows:

Compound 5a > Compound 5c ≈ Compound 5d > Compound 5b > Compound 5f ≈ Compound 5g > Compound 5e > Compound 5h

The next parameters are electrophilicity (ω) and nucleophilicity (N) indexes. An increase in biological activity is associated with an increasing value of nucleophilicity (N) index and decreasing value of electrophilicity (ω), therefore these molecules showed best binding affinities in case of alpha amylase protein interaction with these molecules for screening anti-diabetic activity virtually. Owing to this property, as 5a has the highest nucleophilicity and lowest electrophilicity, it therefore showed seven hydrogen bonding interactions with highest MolDock compared to other compounds in case of protein ligand interaction with alpha amylase binding site. The order of ranking should be:

Compound 5a > Compound 5b ≈ Compound 5c > Compound 5g > Compound 5d > Compound 5f > Compound 5e > Compound 5h ∆N max is the charge of compounds. If ∆N max increases then biological activities also increase. A high value of dipole moment of compound 5f is an indication of fine charge distribution and bond distance adjusted well. This explains that the molecule showing the process of oxidation reflects the best conductivity [38, [42] [43] [44] ].

Molecular electrostatic potential (MEP) helps us in assisting the inter and intra molecular interactions like hydrogen bonding, nucleophilic and electrophilic interactions with incoming molecules, and helps in recognition of biological interactions like molecular docking, drug protein interactions, etc. The MEP of the compounds 5a-h is shown in Figure 15 based on SCF energy. MEP shows the response and behavior of molecules toward the binding sites in biological system. It acts as a visual scheme for accessing the polarity of molecule. The positive (blue) part of MEP shows sites of attack of nucleophiles while negative (red and yellow) areas show the sites of attack of electrophilic molecules. Thus, all the synthesized molecules have blue, or positive, regions around all hydrogen atoms and specifically more blue color around the hydrogen atoms linked to nitrogen moiety indicating high electron density, and red or yellow regions around the oxygen atoms of carbonyl group present between two nitrogen moiety of pyrimidine ring. The neutral portion is of benzene molecules, having a green color in MEP. Localization of blue regions over hydrogen atoms of benzene rings and localization of yellow or red color over oxygen atom of pyrimidine moiety is responsible for the best radical scavenging activity [39, 41, 45] . 

Molecular electrostatic potential (MEP) helps us in assisting the inter and intra molecular interactions like hydrogen bonding, nucleophilic and electrophilic interactions with incoming molecules, and helps in recognition of biological interactions like molecular docking, drug protein interactions, etc. The MEP of the compounds 5a-h is shown in Figure 15 based on SCF energy. MEP shows the response and behavior of molecules toward the binding sites in biological system. It acts as a visual scheme for accessing the polarity of molecule. The positive (blue) part of MEP shows sites of attack of nucleophiles while negative (red and yellow) areas show the sites of attack of electrophilic molecules. Thus, all the synthesized molecules have blue, or positive, regions around all hydrogen atoms and specifically more blue color around the hydrogen atoms linked to nitrogen moiety indicating high electron density, and red or yellow regions around the oxygen atoms of carbonyl group present between two nitrogen moiety of pyrimidine ring. The neutral portion is of benzene molecules, having a green color in MEP. Localization of blue regions over hydrogen atoms of benzene rings and localization of yellow or red color over oxygen atom of pyrimidine moiety is responsible for the best radical scavenging activity [39, 41, 45] . 

The materials (chemicals and solvents) used for synthesis were 95% pure of the brand Alfa Aesar Gemany and Daejung Korea, purchased from local vendor Musa ji Adam & Sons in Faisalabad, Pakistan. These were used as such, with no need for further purification. Aluminum pre-coated plates (Silica gel 60 F254 Merck KGaA, Darmstadt, Germany) were used for analytical thin layer chromatography with ethyl acetate/n-hexane (7:3) as eluent. The melting point of compounds was measured by Stuart melting point apparatus SP10. 1 H-NMR spectra were recorded on Bruker 300 MHz NMR spectrometer, and 13 C-NMR on Bruker 25 and 175 MHz using DMSO-d6 as solvent and TMS as internal standard.

For the synthesis of required compounds, ecofriendly, one-pot multi-component methodology was used with some modifications (Figure 16 ). In this method, a mixture of multi-component reagents, i.e., ethyl acetoacetate, urea/thiourea and aromatic benzalde- 

The materials (chemicals and solvents) used for synthesis were 95% pure of the brand Alfa Aesar Gemany and Daejung Korea, purchased from local vendor Musa ji Adam & Sons in Faisalabad, Pakistan. These were used as such, with no need for further purification. Aluminum pre-coated plates (Silica gel 60 F254 Merck KGaA, Darmstadt, Germany) were used for analytical thin layer chromatography with ethyl acetate/n-hexane (7:3) as eluent. The melting point of compounds was measured by Stuart melting point apparatus SP10. 1 H-NMR spectra were recorded on Bruker 300 MHz NMR spectrometer, and 13 C-NMR on Bruker 25 and 175 MHz using DMSO-d 6 as solvent and TMS as internal standard.

For the synthesis of required compounds, ecofriendly, one-pot multi-component methodology was used with some modifications (Figure 16 ). In this method, a mixture of multi-component reagents, i.e., ethyl acetoacetate, urea/thiourea and aromatic benzaldehyde, was stirred together in a round bottom flask for about 10 min, adding a catalytic amount of CuCl 2 ·H 2 O so that aromaticity could be achieved. Then the mixture obtained was left overnight for obtaining best results. After this the mixture was washed with cold water to remove excess copper salt, dried and re-crystallized with hot solvents to achieve pure products (5a-h). Progression of reaction was checked by TLC [46, 47] . amount of CuCl2·H2O so that aromaticity could be achieved. Then the mixture obtained was left overnight for obtaining best results. After this the mixture was washed with cold water to remove excess copper salt, dried and re-crystallized with hot solvents to achieve pure products (5a-h). Progression of reaction was checked by TLC [46, 47] . 3.2.1. Synthesis of Ethyl 4-(Fluorophenyl)-6-methyl-2oxo-1,2,3,4-tetrahydropyrimidine-5carboxylate (5a-f)

The appropriate amounts, i.e., 0.2 M (6.2 g) of fluoro-benzaldehyde, urea (3 g), thiourea (3.8 g) and ethyl acetoacetate (6.5 g), were mixed by adding a catalytic amount of CuCl2·2H2O by grinding for 7-0 min. After adding a few drops of HCl, they were again mixed for about 10 min. The mixture was then allowed to stayed overnight. Products obtained were purified by dissolving in methanol, by slightly heating the solution in a water bath. The solution was filtered off and allowed to re-crystallize. The fate of the performed reaction was determined with TLC. 1H, s, NH), 7.81 (1H, s, NH), 7.40 (1H, dd, H-5′), 7.36 (1H, d, H-4′), 7.28 (1-H,  d, H-6′), 6.98 (1H, s, H-2′), 5.17 (1H, s, H-4 3.2.1. Synthesis of Ethyl 4-(Fluorophenyl)-6-methyl-2oxo-1,2,3,4-tetrahydropyrimidine-5carboxylate (5a-f) The appropriate amounts, i.e., 0.2 M (6.2 g) of fluoro-benzaldehyde, urea (3 g), thiourea (3.8 g) and ethyl acetoacetate (6.5 g), were mixed by adding a catalytic amount of CuCl 2 ·2H 2 O by grinding for 7-0 min. After adding a few drops of HCl, they were again mixed for about 10 min. The mixture was then allowed to stayed overnight. Products obtained were purified by dissolving in methanol, by slightly heating the solution in a water bath. The solution was filtered off and allowed to re-crystallize. The fate of the performed reaction was determined with TLC. Synthesis of Ethyl 4-(Chlorophenyl)-6-methyl-2oxo-1,2,3,4-tetrahydropyrimidine-5carboxylate (5g,h)

The appropriate amounts, i.e., 0.1 M (3.5 g) of chloro-benzaldehyde, urea (3 g), thiourea (3.8 g) and ethyl acetoacetate (6.5 g), were mixed by adding a catalytic amount of CuCl 2 ·2H 2 O by grinding for 7-10 min. After adding a few drops of HCl, they were again mixed for about 10 min. The mixture was then allowed to stayed overnight. Products obtained were purified by dissolving in methanol, by slightly heating the solution in a water bath. The solution was filtered off and allowed to re-crystallize. The fate of the performed reaction was determined with TLC. The potential of synthesized compounds to scavenge the free radicals were assessed by using diphenylpicrylhydrazyl (DPPH) as free radical [48] .

In order to perform anti-oxidant activity, stock solutions of compounds 5a-h having concentration 200 mM (0.022 g) were prepared. These stock solutions were then subjected to prepare their dilutions up to 250 µg, 200 µg, 150 µg, 100 µg, 50 µg and 25 µg respectively. DPPH solution of 4% was prepared by mixing 0.004 g of DPPH in 100 ml methanol (commercial grade). Ascorbic acid was used as control and its solution was prepared by mixing 0.0017612 g into 100 ml of water having 100 µg concentration.

In test tubes 1 mL of sample from each diluted solution and 2 mL of DPPH solution was added. In the same way, 1 mL of the ascorbic acid was added along with 2 ml of DPPH as control and allowed to stand overnight. The next day, using Hitachi U-2900 spectrophotometer, readings at 517 nm were taken in triplicate and their inhibitory concentration calculated using formula [49] .

Synthesized compounds 5a-h were subjected to in vitro anti-diabetic activity using starch as substrate and alpha amylase as enzyme. Acarbose was used as standard drug [50] .

In a test tube 0.5 mL of compound of each specific dilution and 0.5 mL of enzyme were added and kept in incubator at room temperature for 10 min, as done by our previous method [51] . Readings were taken in triplicate at 540 nm and percentage for the inhibition activity of target molecule was measured by the formula [52] .

The human HepG2 cells were cultured in Dulbecco's Modified Eagle's Medium (DMEM) supplemented with 10% fatal bovine serum (FBS), 100 unit's/mL penicillin and 100 µg/mL streptomycin, and maintained at 37 • C with 5% CO 2 in humidified atmosphere. Cells were treated with extracts/compound dissolved in DMSO with a final DMSO concentration of 0.05%. DMSO treated cells were used as control in all the experiments [53] .

Cell viability was determined by MTT assay as described by us previously. Briefly, HepG2 cells were treated with different concentrations of compounds for 48 h. Following treatment, the MTT reagent was added (500 µg/mL) and cells were further incubated at 37 • C for 4 h. Subsequently, 150 µL DMSO was added to dissolve formazan crystals and absorbance was measured at 490 nm in a microplate reader (Thermo Scientific, Waltham, MA, USA). The percentage of cell viability was calculated [54] .

All the synthesized compounds were drawn into 2D conformers by using ChemDraw Professional (Version 19.1.0.8, Perkin Elmer, Waltham, MA, USA), then these structures were imported to chem3D Ultra (Version 19.1.0.8, Perkin Elmer, Waltham, MA, USA). All the energy minimizations and other structural conformations, such as bond order, assigning missing bonds, explicit hydrogens and flexible torsional if absent in synthesized compounds, were optimized by using MM2 force field-Steepest Descent Algorithm in chem3D [27, 55] . The crystal structure of target protein was downloaded from Protein Data Bank (PDB) at the Research Collaboratory for Structural Bioinformatics (RCSB, http://www.rcsb.org, accessed on 13-17 January 2021). PDB ID for anti-cancer activity is human serum albumin having ID (3B9L) with resolution of 2.60 Å. For antidiabetic activity, the crystal structure of human glucokinase having PDB ID (1V4S) with a resolution of 2.3 Å was used as target receptor site. In case of anti-oxidant activity, quercetin complex kinase having PDB ID (2HCK) with a resolution of 3.00 Å was used as target crystal structure. All these crystal structures were downloaded as PDB Format (gz) and then, after importing into MVD, their protein preparation was carried out before docking [22, [56] [57] [58] [59] .

Molecular docking studies based on synthesized compounds 5a-c was conducted by using Molegro Virtual Docker (MVD 2013 6.0.1, Molegro ApS, Aarhus, Denmark) and Discovery Studio Visualizer 2020. As studies revealed that MVD showed the best binding affinity in the form of Mol dock score as compared to other docking software like Surflex, Glide, Autodock Vina and FlexX [22, 60] . Pose comprising top docked conformation was examined by using MolDock Score [GRID] algorithm, number of runs taken as 10, maximum iterations were 1500, population size of 50, with energy threshold of 100 having grid resolution 0.30 Å [23] [24] [25] [26] [27] 58, 61, 62] . The MolDock score, length and number of hydrogen bonds involved along with residues involved in hydrogen bonding are listed for all the biological activities.

Density functional language is a universal approach for defining the molecular structures of organic compounds and their activity relationships by making use of quantumchemical descriptors and geometrical parameters [63] . The main objective is the correlation of biological activities of compounds with molecular descriptors given by DFT calculations [64] . All computational calculations of compounds were carried through Gaussian 09W program supported by the Gauss View 6.0.16 interface [65] . The molecules are optimized and its parameters calculated operating hybrid type B3LYP utilizing 321-G basis set with DFT exchange, which provide HOMO-LUMO geometries, net charge, energy gap, dipole moment and other computational descriptors [40] .

Eight new compounds were synthesized in one-pot multi-component strategy by adopting solvent free methodology. All the compounds 5a-h was evaluated for their biological potential against diabetes, radical scavenge and cancer cell lines. After combinatorial in vitro and in silico analysis, compound 5c was pharmacologically active for anti-oxidant activity, 5e and 5c for cytotoxicity and 5g for combating diabetes. These potential leads had the best biological potential, and their biological activity can be enhanced by further futural derivatization, or by making their structural analogs. Hence, overall, the synthesized target molecules were proved to be potential therapeutic agents against different classes of inhibitor, thus opening new research interests regarding pyrimidine derivatives that may lead to evolution in medicinal systems and in the field of synthesis. The conclusion is that the synthetic pathway chosen here can be of primary interest for research communities and pharmacists, and the novel compounds synthesized here can be used in future as effective drugs due to their cell specificity, safety, inexpensiveness, sustainability, enhanced activity, eco-friendly nature and less time consuming and cost-effective synthetic method. 

3-d] pyrimidine as a promising scaffold in medicinal chemistry: Recent advances

A Review on Heterocyclic: Synthesis and Their Application in Medicinal Chemistry of Imidazole Moiety

A review: Biological importance of heterocyclic compounds

An overview of the synthetic routes to the best selling drugs containing 6-membered heterocycles

A mini review of pyrimidine and fused pyrimidine marketed drugs

Synthesis and biological evaluation of novel imidazo[1,2-a]pyridinecarboxamides as potent anti-tuberculosis agents

The flow synthesis of heterocycles for natural product and medicinal chemistry applications

Pyrimidine as constituent of natural biologically active compounds

Design, synthesis, and biological evaluation of piperidinyl-substituted [1,2,4]triazolo[1,5-a]pyrimidine derivatives as potential anti-HIV-1 agents with reduced cytotoxicity

A simplified green chemistry approach to the Biginelli reaction using 'Grindstone Chemistry

Origins, current status, and future challenges of green chemistry

Fluorine in Pharmaceutical and Medicinal Chemistry: From Biophysical Aspects to Clinial Applications

Fluorine-Containing Drugs Approved by the FDA

Solvent-less reactions: Green and sustainable approaches in medicinal chemistry

Novel Methodologies for Chemical Activation in Organic Synthesis under Solvent-Free Reaction Conditions

In-silico design, synthesis, ADMET studies and biological evaluation of novel derivatives of Chlorogenic acid against Urease protein and H. Pylori bacterium

Synthesis of benzotriazoles derivatives and their dual potential as α-amylase and α-glucosidase inhibitors in vitro: Structureactivity relationship, molecular docking, and kinetic studies

Dihydropyridines as potential α-amylase and α-glucosidase inhibitors: Synthesis, in vitro and in silico studies

Molecular design, synthesis, and hypoglycemic and hypolipidemic activities of novel pyrimidine derivatives having thiazolidinedione

Molecular modeling of Acetyl-CoA carboxylase (ACC) from Jatropha curcas and virtual screening for identification of inhibitors

Docking studies of (−)-Epigallocatechin-3-gallate: A Potential Non-Competitive Pancreatic Lipase Inhibitor

Synthesis and Molecular Docking Study of Pyrazine-2-Carboxylic Acid Derivatives

Some new Ag (I), VO (II) and Pd (II) chelates incorporating tridentate imine ligand: Design, synthesis, structure elucidation, density functional theory calculations for DNA interaction, antimicrobial and anticancer activities and molecular docking studies

Biological Activities and Molecular Docking of Brassinosteroids 24-Norcholane Type Analogs

Novel pyrano[3,2-b] xanthen-7 (2H)-ones: Synthesis, antimicrobial, antioxidant and molecular docking studies

Synthesis, cytotoxicity, and molecular docking of substituted 3-(2-methylbenzofuran-3-yl)-5-(phenoxymethyl)-1,2,4-oxadiazoles

Molecular docking and dynamics study of natural compound for potential inhibition of main protease of SARS-CoV-2

Phytochemicals from Selective Plants Have Promising Potential against SARS-CoV-2: Investigation and Corroboration through Molecular Docking, MD Simulations, and Quantum Computations

Docking field-based QSAR and pharmacophore studies on the substituted pyrimidine derivatives targeting HIV-1 reverse transcriptase

A New Multi-Objective Approach for Molecular Docking Based on RMSD and Binding Energy

Identification of some novel pyrazolo[1,5-a] pyrimidine derivatives as InhA inhibitors through pharmacophore-based virtual screening and molecular docking

Interactions Between Remdesivir, Ribavirin, Favipiravir, Galidesivir, Hydroxychloroquine and Chloroquine with Fragment Molecular of the COVID-19 Main Protease with Inhibitor N3 Complex (PDB ID: 6LU7) Using Molecular Docking

Variability in docking success rates due to dataset preparation

In silico activity analysis of saponins and 2,5-piperazinedione from marine organism against murine double minute-2 inhibitor and procaspase-3 activator

Putative inhibitors of SARS-CoV-2 main protease from a library of marine natural products: A virtual screening and molecular modeling study

Computational guided drug repurposing for targeting 2 -O-ribose methyltransferase of SARS-CoV-2

Investigation of anticancer properties of caffeinated complexes via computational chemistry methods

Fukui function analysis of some TTF-donor substituted molecules using DFT (B3LYP) calculations

Alkyl sulfonic acide hydrazides: Synthesis, characterization, computational studies and anticancer, antibacterial, anticarbonic anhydrase II (hCA II) activities

Density Functional Theory Studies On Molecular Structure And Electronic Properties Of sulfanilamide, Sulfathiazole, E7070 And Furosemide Molecules

Pentacycloundecane lactam vs lactone norstatine type protease HIV inhibitors: Binding energy calculations and DFT study

Synthesis, structural studies and biological activities of three new 2-(pentadecylthio)-5-aryl-1, 3, 4-oxadiazoles

Density functional theory investigation of the physical properties of dicyano pyridazine molecules

New pyrazolo-triazolo-pyrimidine derivatives as antibacterial agents: Design and synthesis, molecular docking and DFT studies

Sodium fluoride as an efficient catalyst for the synthesis of 2, 4-disubstituted-1, 3-thiazoles and selenazoles at ambient temperature

Synthesis of 5-(thiazol-5-yl)-4,5-dihydroisoxazoles from 3-chloropentane-2,4-dione

Antioxidant, antiglycation and alpha Amylase inhibitory activities of Cassia absus seeds

The use of the stable free radical diphenylpicrylhydrazyl (DPPH) for estimating antioxidant activity

Potent α-amylase inhibitory activity of Indian Ayurvedic medicinal plants

opper-catalyzed one-pot relay synthesis of anthraquinone based pyrimidine derivative as a probe for antioxidant and antidiabetic activity

A comparative study of alpha amylase inhibitory activities of common anti-diabetic plants at Kharagpur 1 block

In vitro cytotoxicity assays: Comparison of LDH, neutral red, MTT and protein assay in hepatoma cell lines following exposure to cadmium chloride

Cell viability assays

Green synthesis, antitubercular evaluation, and molecular docking studies of ethyl 3,5-dicyano-6-oxo-2,4-diarylpiperidine-3-carboxylate derivatives

Structure based multitargeted molecular docking analysis of selected furanocoumarins against breast cancer

Synthesis and Molecular Docking Study of 6-Chloropyrazine-2-Carboxylic acid Derivatives

Novel Synthesis, spectral, characterization of 4, 5-diphenyl-1-((tetrahydrofuran-2-yl) methyl)-2-(3, 4, 5-trichlorophenyl)-1H-imidazole and its applications of molecular docking, anticancer activity

Design, Synthesis, Biological Evaluation and Molecular Modelling Studies of Conophylline Inspired Novel Indolyl Oxoacetamides as Potent Pancreatic Lipase Inhibitors

A series of natural flavonoids as thrombin inhibitors: Structure-activity relationships

Design of novel JAK3 Inhibitors towards Rheumatoid Arthritis using molecular docking analysis

Synthesis, characterization, molecular docking and biological activities of novel pyrazoline derivatives

Density functional theory of electronic structure

Synthesis, biological evaluation and DFT calculation of novel pyrazole and pyrimidine derivatives

A comparative theoretical study on the biological activity, chemical reactivity, and coordination ability of dichloro-substituted(1,3-thiazol-2-yl) acetamides

Authors are thankful to the Higher Education Commission of Pakistan for providing facilities to conduct this research under the HEC/TDF03-172 research grant. All authors of this article would like to thank the University of California for their financial and academic support to publish this paper in journal.

There is no conflict of interest.Sample Availability: Sample of the compounds are available from authors.