key: cord-0016908-1zb8cwqq
authors: Yang, Ying-Ying; Zhou, Wen-Tao; Song, Wei-Long; Zhu, Qing-Quan; Xiong, Hao-Jiang; Zhang, Yu; Cheng, Sheng; Luo, Pai-Feng; Lu, Ying-Wei
title: Terminal Groups-Dependent Near-Field Enhancement Effect of Ti(3)C(2)T(x) Nanosheets
date: 2021-04-12
journal: Nanoscale Res Lett
DOI: 10.1186/s11671-021-03510-5
sha: 97e6dc101d11e5c0475f02a94f32959430f0683d
doc_id: 16908
cord_uid: 1zb8cwqq

Both multilayered (ML) and few-layered (FL) Ti(3)C(2)T(x) nanosheets have been prepared through a typical etching and delaminating procedure. Various characterizations confirm that the dominant terminal groups on ML-Ti(3)C(2)T(x) and FL-Ti(3)C(2)T(x) are different, which have been assigned to O-related and hydroxyl groups, respectively. Such deviation of the dominant terminals results in the different physical and chemical performance and eventually makes the nanosheets have different potential applications. In particular, before coupling to Ag nanoparticles, ML-Ti(3)C(2)T(x) can present stronger near-field enhancement effect; however, Ag/FL-Ti(3)C(2)T(x) hybrid structure can confine stronger near-field due to the electron injection, which can be offered by the terminated hydroxyl groups. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1186/s11671-021-03510-5.

Ti 3 C 2 T x , a typical two-dimensional layered transition metal carbide with a graphene-like structure, has attracted great attention due to its wide potential applications in fields of catalysis, energy, and medicine thanks to its unique properties, especially large specific surface area and so on [1] [2] [3] [4] [5] [6] . It has been demonstrated that the physical and chemical performance of Ti 3 C 2 T x could be determined by its terminal groups, referred as T x in the formula (usually are -F, -O and/or -OH), which can be adjusted by choosing different preparation procedures [7, 8] . For example, some experimental results indicate that the hydrophilic hydrophobic equilibrium of Ti 3 C 2 T x can be modulated by interacting some agent groups with -O terminal groups on Ti 3 C 2 T x [9] , and the Pb adsorption capacity can be improved by connecting with hydroxyl groups on Ti 3 C 2 T x [10] . In the meantime, some theoretical works have determined that the attached methoxy groups could improve the stability of Ti 2 C and Ti 3 C 2 [11] , and O-related terminal groups could enhance the lithium ion storage capacity of various nanosheets [12] . Apart from the multifarious applications by taking advantage of the unique layered structure with certain terminal groups, it is found that Ti 3 C 2 T x can present plasmonic performance as well, and the resonance wavelength can be tuned by the terminals and/or thickness [13] , indicating that Ti 3 C 2 T x could confine electromagnetic field under excitation and eventually can be employed as broadband perfect absorbers [14, 15] , Terahertz shielding devices [16] , and photonic and/or molecular detectors or sensors [17] [18] [19] . However, most of previous works either concerned the etching condition dependent terminal groups [20] or focused on the overall plasmonic performance [21] . Therefore, it is interesting to systematically study the relationship between the terminal groups of Ti 3 C 2 T x with different layers and their near-field enhancement effect, since such effect has been widely employed in many optical related fields, such as surface-enhanced Raman scattering detection, due to the strong confined electromagnetic field [22] [23] [24] .

In this work, in order to simplify the terminal options and avoid using hazardous HF, the mixed etching agent of LiF and HCl has been used to minimize the fluorine Open Access *Correspondence: luyw@hfut.edu.cn 1 School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, People's Republic of China Full list of author information is available at the end of the article terminals (-F) in the etching process [25] . Furthermore, the procedure of sonication in water has been carried out to delaminate the multilayered Ti 3 C 2 T x (ML-Ti 3 C 2 T x ) into few-layered Ti 3 C 2 T x (FL-Ti 3 C 2 T x ) without introducing any other reagents. As a result, the obtained Ti 3 C 2 T x with different layers in this work will be mainly terminated by either O-or OH-related groups, which make ML-Ti 3 C 2 T x or FL-Ti 3 C 2 T x nanosheets reveal different physical and chemical properties and eventually present different near-filed enhancement performance. In addition, the hybrid structures composed of Ti 3 C 2 T x and Ag nanoparticles have been prepared and the corresponding coupling effects have been explored as well. Such exploration regarding terminal dependent plasmonic performance of these Ti 3 C 2 T x with different layers and configurations could help people to select suitable Ti 3 C 2 T x -based materials in some specific optical fields.

ML-Ti 3 C 2 T x was prepared by following a modified previously reported method [26] . The typical etching process started with the preparation of LiF solution by dissolving 1 g of LiF in 20 mL of dilute HCl solution (6 M) with stirring. Subsequently, 1 g of Ti 3 AlC 2 powder was slowly added into the above solution, and the etching process was kept at 70 °C for 45 h under stirring. The wet sediment was then washed several times with deionized water until the pH of the suspension liquid was bigger than 6. Afterward, the suspension was collected and named as ML-Ti 3 C 2 T x . To obtain FL-Ti 3 C 2 T x , ML-Ti 3 C 2 T x was further delaminated by sonication for 2 h in Ar atmosphere and followed by centrifugation at 3500 rpm for 1 h.

The synthesis of the hybrid materials was started with the preparation of the mixed solution of AgNO 3 (12.5 mL, 2 mmol/L) and NaC 6 H 5 O 7 (12.5 mL, 4 mmol/L) at room temperature. After rapidly adding PVP solution (25 mL, 0.1 g/mL), Ti 3 C 2 T x solution (5 mL, 0.05 mg/mL) was then slowly added into the mixed solution with stirring for 10 min at room temperature. Subsequently, the above-mixed solution was heated up to 70 °C to react for 45 h. After centrifuging, the products were kept in water and named as Ag/ML-Ti 3 C 2 T x and Ag/FL-Ti 3 C 2 T x , respectively, according to the type of Ti 3 C 2 T x used in the procedure.

A field emission scanning electron microscope (Carl ZEISS Sigma) and two transmission electron microscopes (JEM-2100F and JEM-1400Flash) have been employed to determine the morphologies of the samples. The X-ray diffraction (XRD) patterns in the range of 2θ = 5°-80° with a step of 0.02° were recorded on a powder diffractometer (X'Pert PRO MPD). Zeta potentials and surface states of ML-Ti 3 C 2 T x and FL-Ti 3 C 2 T x were measured by a Malvern Zetasizer (Nano-ZS90) and an X-ray photoelectron spectroscopy (XPS, ESCALAB 250Xi), respectively. The absorption and Raman performance of samples were recorded by a UV-Vis spectrophotometer (CARY 5000) and a Raman spectroscopy (LabRAM HR Evolution), respectively. The excitation wavelength of Raman detection was 532 nm, and the laser powers for usual Raman measurements and surface enhanced Raman scattering (SERS) characterizations were 12.5 mW and 0.05 mW, respectively.

Both morphologies of ML-Ti 3 C 2 T x and FL-Ti 3 C 2 T x are shown in Fig. 1a , b and c, d, respectively. It can be seen that FL-Ti 3 C 2 T x looks more transparent, indicating that its layer number is much less than ML-Ti 3 C 2 T x . Figure 1e shows the XRD patterns of all samples. Ti 3 AlC 2 and ML-Ti 3 C 2 T x show their typical phase features, which agree well with some previous reports [26] [27] [28] . It can be readily observed that the intense (002) peak of ML-Ti 3 C 2 T x shifts to the lower angle comparing with that of Ti 3 AlC 2 , implying the removal of Al atoms from the MAX phase and the expanding along the c axis. Compared with the diffraction peaks of ML-Ti 3 C 2 T x , both broadened (002) peak and disappeared (004) and (008) peaks of FL-Ti 3 C 2 T x determined the successful preparation of the few-layered sample [29] . Moreover, the (002) peak of FL-Ti 3 C 2 T x locates at a little higher angle than that of ML-Ti 3 C 2 T x , indicating that ML-Ti 3 C 2 T x and FL-Ti 3 C 2 T x should be terminated with different groups, which can be attributed to -O and -OH, respectively, since the as-prepared Ti 3 C 2 T x (ML-Ti 3 C 2 T x ) will not be mainly terminated with -F without HF as etching agent and the corresponding c parameters attracted from the XRD patterns agree well with what previous works reported [25, 30] . Figure 2a shows Raman spectra of ML-Ti 3 C 2 T x and FL-Ti 3 C 2 T x . As it can be seen that the Raman signals in the range of 200-800 cm −1 for both samples are quite similar. Among them, the peak at 717 cm −1 is due to the A 1g symmetrical out-of-plane vibration of Ti and C atoms, while the peaks at 244, 366 and 570 cm −1 are arising from the in-plane (shear) modes of Ti, C and surface terminal groups, respectively [31, 32] . As for the Raman signals ranging from 800 to 1800 cm −1 , comparing with ML-Ti 3 C 2 T x , FL-Ti 3 C 2 T x not only shows stronger Raman signal at 1580 cm −1 (G band), but also presents two emerging Raman bands at 1000-1200 cm −1 and 1300 cm −1 (D band). Herein, the appearance of D band indicates that some Ti atoms have been peeled away and more C atoms are exposed to the surroundings [33] . Therefore, the integrated Raman intensity of FL-Ti 3 C 2 T x in this range is slightly larger than that of ML-Ti 3 C 2 T x , implying that FL-Ti 3 C 2 T x adsorbs more terminal groups. Zeta potentials of ML-Ti 3 C 2 T x and FL-Ti 3 C 2 T x are −4.38 and −26.9 mV, respectively, as shown in Additional file 1: Fig. S1 , which further confirm that FL-Ti 3 C 2 T x are terminated by more groups with negative charges.

The UV-Vis spectra shown in Fig. 2b reveal that both FL-Ti 3 C 2 T x and ML-Ti 3 C 2 T x present two dominant absorption bands. In the UV region (225-325 nm), FL-Ti 3 C 2 T x displays relatively stronger absorption band which corresponds to the band gap transition [34] , implying that there are more -OH groups have been terminated on FL-Ti 3 C 2 T x [35] . On the other hand, the comparison between the long wavelength absorption bands (600-1000 nm) of both samples shows that the relative intensity of FL-Ti 3 C 2 T x in this range is obviously lower than that of ML-Ti 3 C 2 T x , indicating that ML-Ti 3 C 2 T x are mainly terminated by -O [35] . FL-Ti 3 C 2 T x can be well dispersed in the aqueous solution since the terminated -OH groups shows hydrophilicity and electrostatic repulsion between sheets [31, 36] . As for ML-Ti 3 C 2 T x with more -O terminals, it can only form a suspension in the beginning and will deposit subsequently as shown in Additional file 1: Fig. S2a .

In order to shed more light on the surface groups terminated on ML-Ti 3 C 2 T x and FL-Ti 3 C 2 T x , XPS spectra of both samples were collected and are shown in Fig. 3 . All corresponding detailed information regarding the surface states are summarized in Additional file 1: Table S1 . The fraction of Ti-C in FL-Ti 3 C 2 T x (9.80%) is lower than Fig. 2 a Raman spectra and b Normalized absorption spectra of FL-Ti 3 C 2 T x and ML-Ti 3 C 2 T x . The inset in b presents the absorption bands of FL-Ti 3 C 2 T x and ML-Ti 3 C 2 T x in the UV region that in ML-Ti 3 C 2 T x (17.31%), while the ratio of C-C in FL-Ti 3 C 2 T x (44.62%) is higher. Such surface states changing evidences the loss of Ti atoms and the more exposed C atoms on the surface of FL-Ti 3 C 2 T x , which agrees with the emerging D band in its Raman spectrum shown in Fig. 2a . The increased C-Ti-T x ratio in FL-Ti 3 C 2 T x (21.27%) indicates that there should be more active terminal groups adsorbed on its surface than ML-Ti 3 C 2 T x , which agrees with the Zeta potential results shown in Additional file 1: Fig. S1 . Apart from the quantity of the terminal groups, the analysis of XPS results also reveals that FL-Ti 3 C 2 T x and ML-Ti 3 C 2 T x have been terminated by different dominant functional groups, which also has been suggested by the (002) diffraction peaks shown in Fig. 1e . Regarding O 1 s spectra of these two samples, it can be clearly seen that more O-related states have been found on the surface of ML-Ti 3 C 2 T x , and some of them are adsorbed oxygen molecules, which can dissociate to form Ti 3 C 2 O x and therefore will repel O 2 in air to prevent further oxidation of ML-Ti 3 C 2 T x [37] . As a result, ML-Ti 3 C 2 T x seems present a better oxidation resistance with a lower TiO 2 ratio (13.98%) than FL-Ti 3 C 2 T x (19.60%).

Based on the observations and analyses of Figs. 1, 2 and 3, it can be concluded that although both ML-Ti 3 C 2 T x and FL-Ti 3 C 2 T x are terminated by some functional groups with negative charge, the amount and dominant type of the groups are quite different. On one hand, the quantity of terminal groups on FL-Ti 3 C 2 T x is larger than that of ML-Ti 3 C 2 T x . On the other hand, the dominant terminal structure on ML-Ti 3 C 2 T x is Ti 3 C 2 O 2 , which makes ML-Ti 3 C 2 T x to be more stable in the air [38] , while for FL-Ti 3 C 2 T x , it is mainly terminated by Ti 3 C 2 (OH) 2 , which helps FL-Ti 3 C 2 T x to be well-dispersed in aqueous solutions [36] .

Ti 3 C 2 T x with functional terminal groups could reveal good adsorption performance and therefore could act as a surface-enhanced Raman scattering (SERS) substrate to improve the Raman activity of positively charged probe molecules [3, 39, 40] . Comparing with ML-Ti 3 C 2 T x , FL-Ti 3 C 2 T x should present better adsorption ability since it has been determined that it is terminated with more negative charges. Such better adsorption performance has been demonstrated by the optical photographs of the mixed solution with R6G and FL-Ti 3 C 2 T x as shown in Additional file 1: Fig. S2b. However, Fig. 4a reveals that the ML-Ti 3 C 2 T x substrate obviously performs better SERS activity than FL-Ti 3 C 2 T x one. Considering ML-Ti 3 C 2 T x with -O terminal presents stronger absorption band centered at around 800 nm, which can be assigned to the surface plasmon resonant absorption [3, 15, 39, 41] , it therefore can be concluded that ML-Ti 3 C 2 T x with stronger SERS activity should result from the stronger near-field effect induced by the relatively stronger surface plasmon resonance as shown in Fig. 2b .

In order to further explore the relationship between the terminal groups and the near-filed effect of Ti 3 C 2 T x nanosheets, the hybrid structures composed of Ti 3 C 2 T x nanosheets, including few layered and multilayered, and Ag nanoparticles (NPs) have been synthesized, which are accordingly labeled as Ag/FL-Ti 3 C 2 T x and Ag/ML-Ti 3 C 2 T x , respectively. The morphologies of both hybrid samples are shown in Additional file 1: Fig. S3 . The insets indicate the corresponding size distributions of Ag NPs loading on ML-Ti 3 C 2 T x (5-40 nm) is larger than that on FL-Ti 3 C 2 T x (2-20 nm). Intuitively, it might be concluded that Ag/ML-Ti 3 C 2 T x could perform better SERS activity than Ag/FL-Ti 3 C 2 T x since both larger Ag NPs and relative stronger surface plasmon resonance of ML-Ti 3 C 2 T x are beneficial to confine stronger near-field. However, the SERS spectra shown in Fig. 4b reveal a   Fig. 4 a SERS spectra of R6G (10 -3 M) with ML-Ti 3 C 2 T x and FL-Ti 3 C 2 T x . b SERS spectra of R6G (10 -6 M) with Ag/ML-Ti 3 C 2 T x and Ag/FL-Ti 3 C 2 T x . c Schematic diagram of electron transfer from FL-Ti 3 C 2 T x to Ag NP due to their work function difference. W m and W s represent the work functions of Ag NP and FL-Ti 3 C 2 T x , respectively counterintuitive result. It is clear that the enhancement effect offered by Ag/FL-Ti 3 C 2 T x is nearly 3 times of that by Ag/ML-Ti 3 C 2 T x , implying that the coupling between Ag NPs and FL-Ti 3 C 2 T x should play an important role during the detection process. As confirmed above that FL-Ti 3 C 2 T x has been mainly terminated by -OH groups with lots of surface electrons, which will result in the formation of Ti 3 C 2 (OH) 2 structure with a work function of 1.6-2.8 eV [42, 43] . As shown in Fig. 4c , the abundant surface electrons will therefore transfer from FL-Ti 3 C 2 T x to Ag NPs with a work function of 4.7 eV [44] . With the extra injection of hot electrons from FL-Ti 3 C 2 T x , Ag NPs with smaller size could present stronger resonance under the excitation and eventually perform better SERS activity due to the coupling induced stronger electromagnetic effect. It is worth noting that the work function of Ti 3 C 2 O 2 structure formed on the surface of ML-Ti 3 C 2 T x is around 6.0 eV [43] , which will result in electron transfer from Ag NPs surface to ML-Ti 3 C 2 T x nanosheets and therefore will weaken the near-field enhanced effect supported by the Ag NPs. On the other hand, not like FL-Ti 3 C 2 T x with -OH terminals, ML-Ti 3 C 2 T x with -O terminals cannot offer sufficient electrons under excitation [42] . It is therefore reasonable that the SERS activity of Ag/ML-Ti 3 C 2 T x is worse than that of Ag/ FL-Ti 3 C 2 T x .

In summary, ML-Ti 3 C 2 T x and FL-Ti 3 C 2 T x terminated with different dominant functional groups have been successfully prepared. It has been demonstrated that ML-Ti 3 C 2 T x is more stable in the air due to the surface structure of Ti 3 C 2 O 2 and show stronger SERS activity than FL-Ti 3 C 2 T x because it can reveal stronger near-field effect. However, FL-Ti 3 C 2 T x terminated by Ti 3 C 2 (OH) 2 can be well dispersed in aqueous solution and will show better SERS performance after coupling to the Ag NPs due to the sufficient electron injection. Such research regarding the terminal groups-dependent near-field enhancement performance will help people to expand the potential applications of Ti 3 C 2 T x in the optical related fields.

Abbreviations ML-Ti 3 C 2 T x : Multilayered Ti 3 C 2 T x ; FL-Ti 3 C 2 T x : Few layered Ti 3 C 2 T x ; SERS: Surface enhanced Raman scattering; NPs: Nanoparticles.

Recent progress in layered transition metal carbides and/or nitrides (MXenes) and their composites: synthesis and applications

Two-dimensional transition metal MXene-based photocatalysts for solar fuel generation

Recent advances in layered Ti 3 C 2 T x MXene for electrochemical energy storage

MXene-based composites: synthesis and applications in rechargeable batteries and supercapacitors

Two-dimensional MXenes: from morphological to optical, electric, and magnetic properties and applications

Two-dimensional transition metal carbides and nitrides (MXenes) for biomedical applications

Fluorine-free synthesis of high purity Ti 3 C 2 T x (T= -OH, -O) via alkali treatment

Element replacement approach by reaction with Lewis acidic molten salts to synthesize nanolaminated MAX phases and MXenes

3D assembly of Ti 3 C 2 -MXene directed by water/oil interfaces

Unique lead adsorption behavior of activated hydroxyl group in two-dimensional titanium carbide

Structural and electronic properties and stability of MXenes Ti 2 C and Ti 3 C 2 functionalized by methoxy groups

Role of surface structure on Li-ion energy storage capacity of two dimensional transition-metal carbides

Enhanced and tunable surface plasmons in two-dimensional Ti 3 C 2 stacks: electronic structure versus boundary effects

Broadband ultrafast photonics of twodimensional transition metal carbides (MXenes)

Highly broadband absorber using plasmonic titanium carbide (MXene)

Enhanced Terahertz shielding of MXenes with nano-metamaterials

MXenes for plasmonic photodetection

Theoretical and experimental studies of Ti 3 C 2 MXene for surface-enhanced Raman spectroscopy-based sensing

Controllable MXene nano-sheet/Au nanostructure architectures for the ultra-sensitive molecule Raman detection

One MAX phase, different MXenes: a guideline to understand the crucial role of etching conditions on Ti 3 C 2 T x surface chemistry

Electromagnetic theories of surface-enhanced Raman spectroscopy

Electronic and optical properties of 2D transition metal carbides and nitrides (MXenes)

Plasmonic Ti 3 C 2 T x MXene enables highly efficient photothermal conversion for healable and transparent wearable device

Charge-transfer resonance and electromagnetic enhancement synergistically enabling MXenes with excellent SERS sensitivity for SARS-CoV-2 S protein detection

NMR reveals the surface functionalisation of Ti 3 C 2 MXene

Conductive two-dimensional titanium carbide 'clay' with high volumetric capacitance

A novel simple method to stably synthesize Ti 3 AlC 2 powder with high purity

Intercalation and delamination of layered carbides and carbonitrides

Organic-base-driven intercalation and delamination for the production of functionalized titanium carbide nanosheets with superior photothermal therapeutic performance

Two-dimensional nanocrystals produced by exfoliation of Ti 3 AlC 2

Flexible MXene/graphene films for ultrafast supercapacitors with outstanding volumetric capacitance

Vibrational properties of Ti 3 C 2 and Ti 3 C 2 T 2 (T = O, F, OH) monosheets by first-principles calculations: a comparative study

Electromagnetic wave absorption properties in the centimetre-band of Ti 3 C 2 T x MXenes with diverse etching time

One-step solution processing of Ag

Optical properties of functionalized Ti 3 C 2 T 2 (T = F, O, OH) MXene: first-principles calculations

Cation intercalation and high volumetric capacitance of two-dimensional titanium carbide

Oxygen adsorption and dissociation during the oxidation of monolayer Ti 2 C

Stabilization and strengthening effects of functional groups in two-dimensional titanium carbide

Two-dimensional titanium carbide (MXene) as surface-enhanced Raman scattering substrate

Heavy-metal adsorption behavior of two-dimensional alkalization intercalated MXene by firstprinciples calculations

Two-dimensional ultrathin MXene ceramic nanosheets for photothermal conversion

Nearly free electron states in MXenes

Environment-sensitive photoresponse of spontaneously partially oxidized Ti 3 C 2 MXene thin films

Enhanced plasmon radiative intensity from Ag nanoparticles coupled to a graphene sheet

This work was financially supported by the National Natural Science Foundation of China (61675061 and 11774077), the Fundamental Research Funds for the Central Universities (PA2019GDQT0013), and the Provincial Innovation and Entrepreneurship Training Program for College Students (S201910359033).

The online version contains supplementary material available at https:// doi. org/ 10. 1186/ s11671-021-03510-5.Additional file 1. Figure S1 . Zeta potentials of ML-Ti 3 C 2 T x and FL-Ti 3 C 2 T x . Figure S2 . (a) Optical photographs of ML-Ti 3 C 2 T x and FL-Ti 3 C 2 T x . (b) Optical photographs of ML-Ti 3 C 2 T x and FL-Ti 3 C 2 T x soaking in R6G solutions. Figure   S3 . TEM images of (a) Ag/ML-Ti 3 C 2 T x and (b) Ag/FL-Ti 3 C 2 T x . The insets are the size distributions of Ag NPs in the corresponding samples. Table S1 . Surface states and corresponding relative contents extracted from the XPS Ti 2p, C 1s and O 1s spectra of ML-Ti 3 C 2 T x and FL-Ti 3 C 2 T x . 

The raw dataset obtained analyzed during the experimental work is avaiable from the corresponding author on reasonable request.

Ethics approval and consent to participate None.

None.

The authors declare that they have no competing interests.