key: cord-0012462-lmnccks8 authors: Bulbul, Ozlem; Pakstis, Andrew J.; Soundararajan, Usha; Gurkan, Cemal; Brissenden, Jane E.; Roscoe, Janet M.; Evsanaa, Baigalmaa; Togtokh, Ariunaa; Paschou, Peristera; Grigorenko, Elena L.; Gurwitz, David; Wootton, Sharon; Lagace, Robert; Chang, Joseph; Speed, William C.; Kidd, Kenneth K. title: Ancestry inference of 96 population samples using microhaplotypes date: 2017-12-16 journal: Int J Legal Med DOI: 10.1007/s00414-017-1748-6 sha: ec9182a795d5345ebf6b5c6196d229b0acf4d007 doc_id: 12462 cord_uid: lmnccks8 Microhaplotypes have become a new type of forensic marker with a great ability to identify and deconvolute mixtures because massively parallel sequencing (MPS) allows the alleles (haplotypes) of the multi-SNP loci to be determined directly for an individual. As originally defined, a microhaplotype locus is a short segment of DNA with two or more SNPs defining three or more haplotypes. The length is short enough, less than about 300 bp, that the read length of current MPS technology can produce a phase-known sequence of each chromosome of an individual. As part of the discovery phase of our studies, data on 130 microhaplotype loci with estimates of haplotype frequency data on 83 populations have been published. To provide a better picture of global allele frequency variation, we have now tested 13 more populations for 65 of the microhaplotype loci from among those with higher levels of inter-population gene frequency variation, including 8 loci not previously published. These loci provide clear distinctions among 6 biogeographic regions and provide some information distinguishing up to 10 clusters of populations. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (10.1007/s00414-017-1748-6) contains supplementary material, which is available to authorized users. Microhaplotypes have great ability to identify and deconvolute mixtures because massively parallel sequencing (MPS) allows the alleles (haplotypes) of the multi-SNP loci to be determined directly for an individual [1] . By 2013 [2] , our interest in use of haplotypes focused on very short Bmicrohaplotypes.^We have subsequently published on our developing set of microhaplotypes and the criteria for selecting the most useful microhaplotypes for mixture Electronic supplementary material The online version of this article (https://doi.org/10.1007/s00414-017-1748-6) contains supplementary material, which is available to authorized users. resolution [3] [4] [5] . As originally defined, a microhaplotype locus (short form, microhap) is a short segment of DNA with two or more SNPs defining three or more haplotypes at reasonable frequencies in a large part of the world. The loci are designed to be typed with MPS, which can determine, for sequences of up to about 300 bp, the specific combination of SNP alleles on each of the parental chromosomes of an individual. Thus, MPS provides phase-known data, in contrast to conventional Sanger sequencing, at any locus with two or more heterozygous SNPs. Microhaplotype loci have several desirable characteristics including, by definition, multiple alleles. Although most microhaps have fewer alleles than most short tandem repeat polymorphisms (STRPs), microhaps have the advantages over STRPs of very low mutation rates, absence of stutter, and the ability to multiplex large numbers of loci. Sets of microhaplotype loci can be optimized to be useful for individual identification, determining biological relationships, providing information on particular phenotypes, providing information on biogeographic ancestry, or, as noted above, deconvolution of a mixture. Knowing the haplotype frequency variation around the world is important in determining how useful particular microhaplotypes will be for any one of those five uses in any specific population. Thus, it is important that multiple loci be characterized on as many populations as possible from as many regions of the world as possible. We recently published on 130 microhaplotypes that we have identified and have characterized in 83 populations from around the world [1] . In that paper, we noted the many ways that microhaps can be used but emphasized the value of microhaps for mixture deconvolution. To expand global characterization, we have now collected and analyzed new data on 5667 individuals for 198 SNPs that define 65 microhaplotypes in 13 additional populations, bringing the total from 83 to 96 populations for 65 microhaplotypes. With this broader geographic representation, we now are considering how well microhaps provide information on biogeographic ancestry. Table S1 . The populations in the table are organized by geographic region. The table also includes the three-character abbreviations used in illustrations, and the unique sample identifier (UID) in the ALFRED database [6, 7] for the description of each sample. The new population samples had only small amounts of DNA available and were chosen, in part, to provide somewhat more uniform sampling of populations around the world. All samples were collected with full informed consent per local law allowing studies such as this. To characterize the additional populations and emphasize ancestry inference, we chose loci with higher ranks by informativeness (I n) based on the 83 populations already evaluated for all 130 microhaplotypes and additional loci from among those loci subsequently characterized [1] . Eight loci not previously published are noted in Table 1 . Availability of TaqMan assays already on hand in the laboratory determined which loci were specifically tested first. The current set of 65 loci involves 198 SNPs and represents an empiric balance of available assays and sufficient DNA. Additional loci may be tested on some of these populations in the future, but the available DNA has been exhausted for several of these Bnew^populations. All markers were typed using TaqMan assays obtained from Thermo Fisher. The individuals with large amounts of DNA were typed following manufacturer's protocols with reaction volumes reduced to 3 μl, run in 384-well plates, and read on an AB9700HT using Applied Biosystems' SDS (sequence detection system) software. To maximize the number of SNPs that could be typed on the small amounts of DNA available, a preamplification protocol was employed as described [8] . The haplotypes were estimated using phase version 2.1.1. [9, 10] as described previously [1] . This approach provides good allele frequency estimates for these reference populations. The effective number of alleles, A e , was calculated following Kidd and Speed [5] . Informativeness, I n , was calculated using the formula of Rosenberg et al. [11] . STRUCTURE analyses [12] were done for the full set of 96 populations and 65 loci with 10 independent runs at each K value. PCA was calculated with Addinsoft's XLSTAT 2017. Table 1 lists the 8 previously unpublished loci and their definitions using the nomenclature for microhaplotypes we previously proposed [13] . The definitions of all 65 loci, including those previously published, are in ALFRED . The allele frequencies for all 65 loci, including the 8 new loci, are now in ALFRED for all 96 populations along with the data on the rest of the original 130 microhaps [1] . Data on all these loci can be retrieved using the key word microhap on the ALFRED home page or on the drop down Search menu. Table 2 lists all 65 microhaplotypes along with their A e and I n values, with the ranks from largest to smallest, using all 96 populations to calculate the statistics. Figure 2 is a scatterplot of the 65 loci by these two statistics. Comparison of the scatterplot in Fig. 2 with that in [1] shows that these 65 loci have proportionately fewer loci with I n less than 0.1 and A e less than 2.0. Figure 3 presents scatterplots from the principal components analysis (PCA) of the 96 populations based on their allele frequencies at the 65 loci. The first two PCs account for 39% of the variation (Fig. 3a) ; the major continental regions--Africa, Southwest Asia, Europe, South Central Asia, East Asia, Americas, and Pacific-clearly separate from one another. Figure 3b shows an enlarged view of the tighter cluster of populations with labels for the individual populations following the labels in Supplemental Table S1 . The third PC accounts for an additional 9.28% (Fig. 3c ) and separates the Native American populations more distinctly from the East Asian populations. The fourth PC (not shown) accounts for only an additional 4% of the variation and moves the Pacific Island populations away from East Asia. Figure 4 shows population averages for STRUCTURE analyses at K = 7 and K = 10. At K = 7, except for small amounts of Bnoise,^the majority of Africans are assigned to a single cluster. The majority of East Asians are assigned to a single cluster, and the majority of the Native Americans are assigned to a single cluster. Three of the BAmericas^populations from the 1000 Genomes project [14] are highly admixed in these analyses and are labeled as such. At K = 10, the populations farthest North (Eastern Siberia, Mongolia) in East Asia cluster together apart from other East Asians while the Sub-Saharan African populations subdivide into distinctive patterns for West Africa compared to Central and East African populations. Comparison of the STRUCTURE results at K = 10 with Fig. 3b shows, by the two distinct statistics, that information on the finer relationships is present in the dataset. Forensic questions that can be addressed by microhaps include resolution of mixtures, identifying relatives, inferring ancestral origins, estimating phenotype, and individualization. In this study, we have emphasized ancestral origins, but we note that this set of 65 microhaplotypes spread across 21 human autosomes can be very useful for mixture deconvolution, familial inference, and individualization as well. Microhaplotypes can incorporate SNPs useful for estimating aspects of phenotype, but we have not considered that type of information. Our analyses of these 65 loci have focused on biogeographic ancestry. In future papers, we will present analyses of random match probabilities (RMP) and familial inference for sets of microhaps. We note that we have estimated the RMP for the reference CEU population sample Table 2 for these 65 loci; the estimated RMP is between 10 −55 and 10 −56 . These 65 loci have different characteristics as measured by A e and I n . Those differences are shown in Fig. 2 . We note that the two microhaps with the highest I n values (mh14KK-101 and mh02KK-003) are among the loci with the lowest A e values (ranks 60 and 56, respectively, Table 2 ). Examination of the haplotype frequencies shows that the global patterns are noticeably different and have large regions of the world with one haplotype at greater than 80% frequencies, albeit different haplotypes in different regions (Supplemental Fig. 2) . The other six loci with I n > 0.35 show a range of A e values from nearly three to nearly six. Basically, these loci have multiple alleles everywhere but very different allele frequencies. We also note that some of the loci have low ranks for both measures. The PCA in Fig. 3 shows that this set of microhaps distinguish among populations from some of the different biogeographic regions. Africa and the Americas are very clearly distinct. The Eastern and Northern of the Eurasian populations also fall into a loose cluster clearly distinct from European populations. What is interesting is how relatively close the European populations cluster in this global set of populations. On the other hand, this is not surprising because Europe is a geographically small area. Figure 3b makes The global dispersion is reflected in the STRUCTURE results in Fig. 4 . At K=7, there are quite distinct biogeographic regions with intermediate populations showing partial assignment to flanking clusters. Europe and Southwest Asia are the exception in that a Southwest to Northeast cline of two clusters is seen. This is a pattern that has been seen with many sets of ancestry markers [e.g., 15, 16] . Our previous paper studying 130 loci on 83 populations [1] had 28 loci with A e > 3.0 giving a very high probability of identifying and resolving a mixture of two individuals; the current dataset has 22 loci in this range. By definition, these 22 loci have multiple alleles and relatively low frequencies for each of the alleles. These same attributes make these good for identifying relatives and make the likelihood of two unrelated individuals having the same multi-locus genotype vanishingly small. Three of the new microhaps are in the region of SLC45A2. The coding SNP at SLC45A2 that is associated with skin color, rs16891982, is located on chromosome 5 at nt 33,951,588 (build 38) and shows a different global pattern of variation from even the closest of these three microhaps which is 17 kb away. The three microhaps also differ in their global patterns (Supplemental Fig. 1 ). At this stage, we are not choosing which is better since the different microhaps may differ in appropriateness for different purposes. The global variation is not identical, with I n values from a high of 0.299 (rank 15) for mh05KK-122 to 0.198 (rank 49) for mh05KK-123. In the context of 65 loci with multiple alleles, including all three will have little effect other than strengthening whatever pattern in STRUCTURE analyses is favored by that chromosomal region--Europe and SW Asia are distinct from East Asia. The addition of 13 populations and emphasis on microhaplotype loci with higher I n values on average, compared to the 130 microhaps in [1] , has shown that these 65 loci constitute a significant panel for ancestry inference. These results provide additional material for selecting panels of microhaplotypes optimized for different purposes. That many of the loci also have high A e values argues that most of these loci have value for mixture deconvolution. The overall results support our previous findings [1] that many microhaplotypes have use for both ancestry inference and mixture deconvolution. The markers with A e > 3.0 are particularly good at mixture deconvolution, and the same logic indicates they will be very useful for familial relationships and individualization. As we have been able to identify and characterize more microhaplotypes as part of our discovery phase, it has become possible to begin the laboratory studies to determine which loci will be the most robust with actual MPS typing. Our objective has been to identify and characterize a large number of loci with useful statistical characteristics such that molecular issues that may exclude some loci from MPS multiplexes will leave sufficient loci. These studies provide the necessary estimates of reference population allele frequencies. When actual multiplex kits are available, the identification of microhaplotype genotypes in individuals using MPS promises to be an important adjunct to forensic casework. Evaluating 130 microhaplotypes across a global set of 83 populations Microhaplotype loci are a powerful new type of forensic marker Current sequencing technology makes microhaplotypes a powerful new type of genetic marker for forensics Genetic markers for massively parallel sequencing in forensics Criteria for selecting microhaplotypes: mixture detection and deconvolution ALFRED: an allele frequency resource for research and teaching ALFRED: an allele frequency database for anthropology Mongolians in the genetic landscape of Central Asia: exploring the genetic relations among Mongolians and other world populations A new statistical method for haplotype reconstruction from population data Accounting for decay of linkage disequilibrium in haplotype inference and missing-data imputation Informativeness of genetic markers for inference of ancestry Inference of population structure using multilocus genotype data Proposed nomenclature for microhaplotypes A global reference for human genetic variation Evaluating a subset of ancestry informative SNPs for discriminating among southwest Asian and circum-Mediterranean populations Increasing the reference populations for the 55 AISNP panel: the need and benefits