key: cord-0011089-82z4ouo7
authors: Zhu, Jie; Lu, Xiaoxue; Li, Yijian; Li, Tingdong; Yang, Linsong; Yang, Kun; Ji, Liang; Lu, Mohong; Li, Mingshi
title: A Rotavirus Virus-Like Particle Confined Palladium Nanoreactor and Its Immobilization on Graphene Oxide for Catalysis
date: 2020-05-14
journal: Catal Letters
DOI: 10.1007/s10562-020-03252-6
sha: c8406e0953bcb764d33f348c3102f3440862a10b
doc_id: 11089
cord_uid: 82z4ouo7

ABSTRACT: In this work, a new viral protein cage based nanoreactor was successfully constructed via encapsulating Tween 80 stabilized palladium nanoparticles (NPs) into rotavirus capsid VP2 virus-like particles (i.e. Pd@VP2). The effects of stabilizers including CTAB, SDS, Tween 80 and PVP on controlling the particle size of Pd NPs were investigated. They were further immobilized on graphene oxide (i.e. Pd@VP2/GO) by a simple mixing method. Some characterizations including FT-IR and XPS were conducted to study adsorption mode of Pd@VP2 on GO sheets. Their catalytic performance was estimated in the reduction of 4-nitrophenol (4-NP). Results showed that Tween 80 stabilized Pd NPs with the molar ratio of Pd to Tween 80 at 1:0.1 possessed the smallest size and the best stability as well. They were encapsulated into viral protein cages (mean size 49 ± 0.26 nm) to assemble confined nanoreactors, most of which contained 1–2 Pd NPs (mean size 8.15 ± 0.26 nm). As-prepared Pd@VP2 indicated an enhanced activity (apparent reaction rate constant k(app) = (3.74 ± 0.10) × 10(−3) s(−1)) for the reduction of 4-NP in comparison to non-confined Pd-Tween80 colloid (k(app) = (2.20 ± 0.06) × 10(−3) s(−1)). It was logically due to confinement effects of Pd@VP2 including high dispersion of Pd NPs and high effective concentration of substrates in confined space. Pd@VP2 were further immobilized on GO surface through C-N bond. Pd@VP2/GO exhibited good reusability after recycling for four runs, confirming the strong anchoring effects of GO on Pd@VP2. GRAPHIC ABSTRACT: [Image: see text] ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (10.1007/s10562-020-03252-6) contains supplementary material, which is available to authorized users.

Metal catalysis within a nanoscopic confinement environment (e.g. nanocage and nanotube) has caught enormous attention very recently due to its superiority over non-confined analogues, such as maintaining high dispersion and stability of metal nanoparticles (NPs), imposing steric hindrance on catalyst-bound reactants and enhancing effective concentration of substrates in confined space [1] [2] [3] [4] [5] [6] [7] [8] . These positive confinement effects remarkably improve the catalytic performance in the reaction.

To date, several chemically synthesized nanoscopic confinement systems, such as zeolites [9] [10] [11] , carbon nano materials [12] [13] [14] [15] , polymers [16] [17] [18] , metal organic frameworks (MOFs) [19] [20] [21] and micelles [22] [23] [24] , have been developed as nanoreactors for various catalytic reactions. However, these confinement systems meet some challenges. Metal nanoparticles, for example, are hard to recycle from zeolites and MOFs due to the poor disassembled properties of those supports. Also, the size and morphology of micelles is difficult to effectively control in preparation process. Undoubtedly, these defects restricted their wide applications in sustainable chemistry and green chemistry.

Compared with chemically synthesized confinement systems, biological supramolecular ones, especially protein nanocages, have several significant characterization featuring reproducible, robust and monodisperse hollow scaffolds with highly organized structures [25] . Virus-like particles (VLPs), a class of protein cages, are of self-assembled hollow structures from viral coat proteins (CPs). As a new type of natural confinement structure, VLPs are often employed to encapsulate some external guest molecules (e.g. polymers, nanoparticles and proteins) to construct functionalized nanocages for drug delivery, biosensing and especially catalysis [26] [27] [28] [29] [30] . Liu et al. [30] encapsulated commercial Au NPs into cowpea chlorotic mottle virus (CCMV) protein cages with the sizes of 18 nm. This confined nano catalyst exhibited a high catalytic activity in nitroarenes reduction.

Unfortunately, due to the highly dispersed nature of VLPs, the required separation of product and VLPs as well as VLPs recovery limited their applications. This issue could be addressed by immobilizing VLPs on solid supports such as silica [31] , thereafter serving as heterogeneous catalysts for the reactions. At present, protein immobilization process often involves two steps including surface modifications (e.g. amine functionalization) on solid supports and further covalent combinations of proteins to them via amide, ester or ether linkages [32, 33] . Obviously, this process is fussy and environment-unfriendly due to the use of toxic organic solvents and coupling agents.

Graphene oxide (GO), a promising candidate for VLPs immobilization, takes several advantages over other solid supports such as the well-dispersion nature in water, large surface area, small mass transfer limitations and low manufacturing cost [34, 35] . More importantly, GO is endowed with abundant epoxy groups (C-O-C) [36, 37] that can directly react with amino groups (-NH 2 ) on VLPs under the mild conditions, resulting in the immobilization of VLPs on GO surface via a simple and green process without any coupling agents and organic solvents.

In our previous work [38] , we constructed a genetically engineered strain Escherichia coli. (E. coli) BL21 (DE3) for the expression of rotavirus capsid VP2 proteins in the field of vaccine development. 120 copies of VP2 monomers can high-efficiently assemble to a spherical VLP with the outer size of 54 nm and the inner one of 45 nm. This large protein cage helps the encapsulation of various cargoes at the same time in it. Noted that, VP2 VLP possesses 60 pores with a diameter of about 2-3 nm on its surface, conducive to the diffusion of guest molecules into and out of the cages for catalysis.

Herein, for the first time, we successfully encapsulated Pd nanoparticles in rotavirus VP2 VLPs by self-assembly. This confined nanocatalyst was further immobilized on GO for catalyzing the reduction of 4-nitrophenol (4-NP). Apparently, this study created a simple and environment-friendly route to develop immobilized VLPs confined catalysts for highly efficient aqueous reactions, which further broaden their application in sustainable and green chemistry.

Pd NPs were synthesized via colloidal method. Some ligands including cetyltrimethyl ammonium bromide (CTAB, Sinopharm, China), Sodium dodecyl sulfate (SDS, Sinopharm, China), Tween 80 (Sinopharm, China) and polyvinylpyrrolidone (PVP, average MW = 10,000, Sinopharm, China) are employed to maintain the stability of synthesized Pd NPs. In a typical experiment, Tween 80 (0.1 μmol), for example, was firstly dissolved in water (3 ml) at room temperature. Aqueous solution of Na 2 PdCl 4 (78 μL, containing 2.0 μmol Pd) was then mixed in above freshly prepared Tween 80 solution with stirring for 15 min under the protection of argon. After that, NaBH 4 solution (200 μL, 30 μmol) was further added in it to reduce Pd 2+ for 5 min under stirring. Finally, Pd colloid solution was formed. The preparation procedures of Pd colloids with other ligands including CTAB, SDS and PVP were similar to that of Tween 80. In the procedure, the molar ratio of Pd to ligand was kept fixed at 20:1 (mol:mol). The size distribution of Pd colloidal NPs was measured here to investigate the effects of ligands on maintaining the stability of synthesized Pd NPs. The best ligand among four ones was selected to further optimize Pd colloid preparation via varying the molar ratio of Pd to this ligand.

Recombinant rotavirus capsid VP2 proteins were expressed and purified according to a method described in our previous literature [38] . 

Before Pd@VP2 immobilization, GO was prepared through a modified Hummers' method [36, 39] . The prepared GO was then dispersed in water with a concentration of 0.2 mg/mL. After that, 1 mL of Pd@VP2 aqueous solution (0.25 mg/mL) and 1 mL of GO aqueous solution was mixed together, keeping stirring for 6 h. Finally, immobilized Pd@ VP2 on GO, labelled as Pd@VP2/GO, was obtained through centrifugation. The efficiency of Pd@VP2 immobilization (E) was determined via adsorption change of Pd@VP2 in aqueous solution before and after their immobilization on GO at the wavelength of 280 nm (λ 280 nm ), as shown in Eq. 1.

where A 0 280 and A 280 are the adsorptions of Pd@VP2 in aqueous solution before and after their immobilization on GO at λ 280 nm , respectively.

After that, Pd@VP2/GO was resuspended in 1 ml of deionized water for the following reaction.

Molecular weight of recombinant rotavirus VP2 protein were tested by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Fast protein liquid chromatography (FPLC) was employed for the purification of Pd@ VP2 nanocages and elution was monitored using a UV-vis spectrometer at the wavelength of 280 nm. Appearance of rotavirus VP2 VLPs, Pd@VP2 and Pd@VP2/GO were negative stained with 2.0 wt% uranyl acetate and observed by transmission electron microscopy (TEM) (JEOL-2010) at 200 kV. Size distribution and zeta potential of Pd colloidal NPs dispersed in the suspension was characterized by a Zetasizer Nano ZES instrument (Malvern Instruments) at 25 °C using laser with wavelength of 633 nm. Some characteristic functional groups on GO and Pd@VP2/GO were obtained by Fourier transform infrared (FT-IR) spectra, collecting on a Bruker Tensor 27 spectrometer. X-ray photoelectron spectroscopy (XPS) measurements were performed using a Thermo Scientific K-Alpha + X-ray photoelectron spectrometer using Al Ka radiation as the excitation source.

The catalytic performance over confined nano catalyst Pd@ VP2 was evaluated in the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP), shown in Fig respectively. Noted that, 4-NP solution without NaBH 4 has a maximal adsorption at the wavelength of 320 nm, while it is ionized by the addition of excess amount of NaBH 4 and its maximal absorption wavelength transfers from 320 to 400 nm ( Fig. S1 in supplementary information, SI). 4-NP reduction will not proceed until the addition of the catalyst. The adsorption at the wavelength of 296 nm representing 4-AP was not observed in the blank test even after 17 min (Fig. S1 ), proving this opinion. Hence, the conversion of 4-NP (X) in the reaction was estimated by the decline of adsorption intensity at the wavelength of 400 nm using Eq. 2.

where A 0 NP and A NP are the initial adsorption of 4-NP and the instant one during the reaction at λ 400 nm , respectively.

Since 4-NP hydrogenation is generally considered as a pseudo-first-order reaction [30, 40] , apparent reaction rate constants (k app ) for 4-NP hydrogenation were calculated based on total conversion of 4-HP over Pd catalysts by Eq. 3.

where X and t represents the total conversion of 4-NP and reaction time, respectively.

The normalized reaction rate constant (k nor ) was introduced for a quantitative comparison. It was calculated by Eq. 4.

where n Pd represents molar number of Pd.

Initial reaction rates in Turnover frequency (TOF) over Pd@VP2 was further calculated by Eq. 5 and 6.

where D Pd is Pd dispersion that could be estimated by spherical model of metal particles; and n 0 NP is initial molar number Also, immobilized catalyst Pd@VP2/GO was employed for recycling test through four consecutive reactions. At the end of the reaction, Pd@VP2/GO was filtered and rinsed with water for three times at the room temperature. The recycled catalyst was employed for the next run.

4-NP reduction over Pd catalysts in this work were all carried out with four parallel tests and the results were analyzed in statistics.

Metal nanoparticles without any protection prefer agglomeration to large particles if they diffuse freely in the liquid phase due to their high surface energies as well as van der Waals forces among them. Hence, some stabilizers such as polymers or surfactants are often employed surrounding individual nanoparticles to prevent their agglomeration. Herein, PVP (nonionic polymer) and three types of surfactants including CTAB (cationic one), SDS (anionic one) and Tween 80 (nonionic one), were used to control particle sizes of synthesized Pd NPs. As-prepared Pd colloidal NPs were labelled as Pd-PVP, Pd-CTAB, Pd-SDS and Pd-Tween80, respectively.

Properties of above Pd colloidal NPs were summarized in Table 1 . Obviously, the order of stabilizers for efficiently controlling the particle size of Pd NPs was Tween 80 > SDS > PVP > CTAB. Tween 80, the best stabilizer among four ones, for example, had the size distribution in the range of 10-1000 nm in aqueous medium and its mean size was calculated to be about 37.26 nm (Fig. S2c , SI). In comparison, Pd-CTAB had the size distribution mainly in the range of 60-1000 nm with the mean size at 233.2 nm. Results closely related to the properties of stabilizers. CTAB, a cationic surfactant, is hard to adsorb on electrophilic Pd NPs surfaces. Hence, it is unfavorable to the stability of Pd NPs (Zeta potential only − 0.21 mV). However, SDS, an anionic one, is opposite to CTAB. Electrostatic stabilization occurs in this case by adsorbing SDS molecules on the surface of Pd NPs, resulting in coulombic repulsion between the nanoparticles [41] . Apparently, it helps the stability of Pd NPs (Zeta potential − 13.5 mV). In addition, Tween 80 and PVP, both nonionic stabilizers, achieve steric stabilization by a protective barrier composed of large molecules. They can chemically bond with some part of Pd surface as well as physically occupy the interspace between Pd NPs, preventing direct contact between them [42] . Actually, Tween 80 stabilized Pd NPs possessed the smallest mean size and the best stability (Zeta potential -22.3 mV) as well in this work. Compared to Pd-Tween80, Pd-PVP had the larger mean particle size, very possibly attributing to the polymer with a long chain surrounding individual Pd NPs. Also, negatively charged Pd-Tween80 favors the encapsulation of it into VLP via self-assembly due to its strong interaction with cationic VP2 capsid proteins. In summary, Tween 80 was selected to stabilize Pd NPs in the following studies.

Pd colloid preparation process was further optimized via varying the molar ratio of Pd to Tween 80 and results were shown in Fig. 2 . In general, with the addition amount of Tween 80 increasing, the mean size of Pd colloidal NPs had a tendency of concave curve. For instance, when the molar ratio of Pd to Tween 80 declined from 1:0.015 to 1:0.1, the corresponding mean size of Pd colloidal NPs greatly decreased from 160 to 16 nm. However, if the molar ratio of Pd to Tween 80 continued descending, its mean size rose up. It was reasonably attributed to the formation of micelles with large sizes that were composed of excessive surfactant molecules in liquid phase. Hence, the optimal molar ratio of the Pd to Tween 80 was 1:0.1 in this work. As-prepared Pd-Tween80 with the mean size of 16 nm will be further 

The expressed and purified recombinant rotavirus capsid VP2 proteins were firstly tested by SDS-PAGE, as shown in Fig. 3 . Clearly, VP2 proteins with a high purity (greater than 98%) were achieved through purification process. The molecular weight of VP2 was estimated to be about 102 kD, hinting a monomeric form in reducing SDS-PAGE conditions. VP2 proteins can further assemble into spherical VLPs in Tris-HCl buffer (50 mM, pH8.0) [43] with the average size of 49.5 ± 0.6 nm (Fig. 4) , corresponding to that of the native rotavirus [44] . Figure S3 (SI) indicated a good stability of assembled VP2 VLPs in a wide pH environment (pH 3.0-9.6). Its average sizes in aqueous solution at pH 3.0, for example, was measured by dynamic light scattering to be 55.82 ± 4.52 nm (Fig. S3a ), similar to that at pH 9.6 (53.61 ± 6.973 nm, Fig. S3c ). Results proved the strong self-assembly capability of recombinant VP2 proteins. They favored the encapsulation of metal nanoparticles in them for constructing confined nano catalysts. Fast protein liquid chromatography (FPLC) was employed for the purification of Pd@VP2 nanocages, as shown in Fig.  S4 (SI) . Results showed that Pd@VP2 passed through the column with the elution volume at about 10 mL, followed by VP2 VLPs at about 16 mL. TEM image of purified Pd@ VP2 (Fig. 5a) hinted the successful encapsulation of Pd NPs into recombinant rotavirus VP2 VLPs. Most VLPs contained 1-2 Pd NPs with the mean size of 8.15 ± 0.26 nm. Furthermore, based on adsorption intensity ratio of Pd@VP2 to VP2 VLPs, encapsulation rate was beyond 80%.

As-prepared Pd@VP2 was immobilized on GO sheets by a simple mixing method. Figure 5b showed TEM image of their appearance. Clearly, a great number of Pd@VP2 were observed to adsorb on GO (Fig. 5b) . The appearance and size of Pd@VP2 maintained unchanged before and after immobilization, hinting the stability of Pd@VP2. The efficiency of Pd@VP2 immobilization was determined via adsorption change of Pd@VP2 in aqueous solution before and after immobilization on GO at the wavelength of 280 nm (λ 280 nm ), the maximum absorption wavelength of proteins. Based on UV/Vis spectrum in Fig. S5 (SI), Pd@VP2 immobilization efficiency was calculated to be 85%, indicating the high efficiency of this immobilization method.

Some characterizations including FT-IR and XPS were further conducted to investigate adsorption mode of Pd@ VP2 on GO sheets. At first, FT-IR spectra in Fig. 6 identified some functional groups on GO before and after Pd@ VP2 immobilization on it. Specifically, FT-IR spectrum of GO in Fig. 6 showed some typical groups such as sp 2 carbon ring (C-C, 1610 cm −1 ), hydroxyl group (C-OH, 1045 cm −1 ), epoxy group (C-O-C, 1216 cm −1 ) and carbonyl group (C = O, 1720 cm −1 ), corresponding to those reported in references [36, 37] . While after the immobilization of Pd@VP2 on GO, its FT-IR spectrum exhibited strong characteristic peaks of amide II band (C-NH-, 1524 cm −1 ) and carbonyl group (C = O, 1649 cm −1 ) that were originated from proteins. Noted that, the weak peak of epoxy groups very possibly hinted that they were employed to covalently link to VP2 proteins. Therefore, FT-IR results provided the direct evidence for the successful immobilization of Pd@ VP2 on GO.

Moreover, XPS spectra were analyzed to characterize the surface chemical compositions of Pd@VP2/GO, for However, after Pd@VP2 immobilization on GO, its C1s spectrum (Fig. 7b ) exhibited a new peak at 285.7 eV, representing amine (C-N) group. It was reasonably originated from covalently linkage of VP2 proteins to GO. Noted that, the molar fraction of C-O-C group in C1s distribution was declined from 16.2% to 7.1% after Pd@VP2 immobilization on GO. It proved that C-O-C groups on GO were employed to covalently link to VP2 proteins, in accordance with FT-IR results.

Based on above characterizations, Pd@VP2 were successfully immobilized on GO surface via SN2 reaction. Specifically, the protein cage contains amino groups with lone pair electrons on its surface. As a nucleophilic reagent, protein cage could easily attack electropositive carbon atom of epoxy group on GO surface, leading to the ring opening. Thus, Pd@VP2 were covalently linked to GO surface through C-N bond, as shown in Fig. 8. 

Active sites of Pd@VP2 were firstly analyzed by Pd3d XPS spectrum (Fig. 7c) . Obviously, it showed four typical peaks at 336.2, 338.6, 341.5 and 343.7 eV, representing Pd 0 3d5/2, Pd 2+ 3d5/2, Pd 0 3d3/2 and Pd 2+ 3d3/2, respectively. Pd 0 species accounted for approximately 86.5% of the total. The appearance of partial Pd 2+ species was possibly attributed to the coordination effect of surfactant on Pd. Oxygen atoms in some functional groups such as ethoxy groups of Tween 80 may provide electrons for anchoring Pd ions, leading to insufficient reduction of Pd 2+ on anchoring sites [45] [46] [47] [48] .

Results further hinted that the addition of Tween 80 favors the dispersion of Pd NPs, preventing their aggregation. The reduction of 4-NP to 4-AP is a consecutive reaction (Fig. 1) . As mentioned in the experimental section, 4-NP is firstly ionized by the addition of excess amount of BH 4 − . After the further addition of Pd catalyst, 4-NP reduction begins. It is hydrogenated to intermediate 4-HP and then the final one 4-AP. Noted that, the reduction of 4-NP to 4-HP proceeds so fast that 4-HP is hard to detect in this study, as shown in Fig. S6a . Herein, reduction of 4-NP to 4-AP was employed for evaluating the catalytic activity over asprepared catalysts. (Fig. 9 ). For example, 4-NP conversion was only (66.12 ± 1.86) % with 4-NP concentration at 4 mM. However, it arrived at (98.14 ± 1.72) % when 4-NP concentration declined to 1.6 mM at the same time (Experimental data in Table S1 , SI). Clearly, excessive substrates in the catalytic system led to the complete reaction for a longer time. Nevertheless, when 4-NP concentration decreased to lower than 1.6 mM, 4-NP conversion fell very slowly in this study due to the enough Pd sites for the reaction in this case. Therefore, 4-NP with the concentration at 1.6 mM was chose for the following reactions.

Moreover, the dependence of reduction rate constant with respect to the catalyst concentration was investigated here. The final concentration of Pd in Pd@VP2 was controlled to 2-8 μM and that of 4-NP kept constant at 1.6 mM. The reaction proceeded for 24 min. The result was shown in Fig. 10 . Obviously, k app climbed up with the concentration of the catalyst increasing. It was only (1.04 ± 0.05) × 10 -3 s −1 with final Pd concentration at 2 μM, while k app was up to Based on above results, 4-NP reduction on Pd catalyst proceeds very possibly in terms of Langmuir-Hinshelwood kinetics, in agreement with some reported literatures [49] [50] [51] 56] . In this mechanism, both BH 4 − and ionized 4-NP in the catalytic system are firstly adsorbed on the surface of Pd NPs. BH 4 − , as a strong reducer, is then decomposed on Pd surface to form Pd-hydride. It provides activated hydrogen and electrons to nitro groups of 4-NP adsorbed on Pd surface, resulting in the reduction of nitro groups to amino ones. After that, as-synthesized 4-AP was desorbed from the surface of Pd NPs to the bulk.

Finally, we compared the catalytic performance of Pd@VP2 in 4-NP reduction to those of non-confined Pd-Tween80 and some previously reported Pd-based catalysts ( Table 2) [52] [53] [54] [55] [56] , for investigating its potential prospect in catalysis. Figure 11 hinted an enhanced activity of Pd NPs after the encapsulation of them into VLPs. 4-NP conversion over Pd-Tween80, for instance, was (91.56 ± 2.23) % after 1440 s reaction (Fig. 11a) . In comparison, that over Pd@VP2 reached (98.14 ± 1.62) % at the same time. Its apparent reaction rate constants (k app ) was calculated to be (3.74 ± 0.10) × 10 -3 s −1 , 1.7 times higher than that over Pd-Tween80 (Fig. 11b) . Additionally, the normalized rate constant (k nor ) and turnover frequency (TOF) for Pd@ VP2 in the reaction were further estimated to be about 224 min −1 ·μmol −1 and 33 min −1 , respectively. Clearly, Pd@VP2 exhibited comparatively high activity in contrast to most of Pd-based catalysts listed in Table 2 . It was logically attributed to the confinement effects including the high dispersion of Pd NPs and high effective concentration of substrates in confined space.

After immobilization of Pd@VP2 on GO, its activity was examined by recycling it for four runs. Results exhibited a slight decline on catalytic activity (Fig. 12 ). 4-NP conversion after 1440 s reaction, for instance, decreased from about 86 to 79% in four runs. It was mainly due to the partial mass loss during the recycling process (about 3% for each run). k app of the recycled Pd@VP2/GO in the fourth run was further calculated to be (2.01 ± 0.11) × 10 -3 s −1 (Fig.  S7 ). Considering the immobilization efficiency and the mass loss of the catalyst after recycling, the molar number of Pd NPs in recycled Pd@VP2/GO was only about 70% of that before Pd@VP2 immobilization. Hence, k nor of recycled Pd@VP2/GO was calculated to be (2.87 ± 0.16) s −1 ·μmol −1 , maintaining a high activity. However, it exhibited a slightly declined activity in contrast to Pd@VP2 before immobilization ((3.74 ± 0.10) s −1 ·μmol −1 ). We speculated that it was possibly related to the small part passivation of the catalyst after several runs of catalysis.

Moreover, the stability of Pd@VP2 after recycling was tested, for investigating the reusability of Pd@VP2/GO. TEM image of Pd@VP2 after four runs (Fig. 5c) exhibited the similar appearance to that before reaction (Fig. 5b) . It proved the strong anchoring effects of GO on Pd@VP2, in accordance with XPS analysis. The average size of Pd NPs in Pd@VP2 was measured to be 7.89 ± 0.56 nm (inner Fig. 5c ), keeping unchanged in comparison to that before reaction (7.72 ± 0.14 nm, inner graph of Fig. 5b) . It hinted the high stability of Ru NPs with the protection of protein nanocages. Zeta potential of Pd@VP2/GO after four runs was measured to be -36.1 ± 9.8 mV (Fig. S8b) , slightly less than that before reaction (− 38.7 ± 9.77 mV, Fig. S8a ), possibly owing to the adsorption of a small amount of salt cations on GO surface. Results exhibited the strong electrostatic repulsions among Pd@VP2/GO particles. It favored the dispersion of them in aqueous solution, maintaining the high catalytic activity even after several runs. Additionally, Pd@VP2/GO particles after four runs possessed the mean size of 712.4 nm (Fig. S9b) , similar to that before reaction (693.3 ± 33.54 nm, Fig. S9a ). It proved the stability of asprepared Pd@VP2/GO, indicating its reusable potential in catalysis.

In summary, we synthesized a confined nanoreactor by encapsulating Tween 80 stabilized Pd nanoparticles into rotavirus VP2 VLPs (i.e. Pd@VP2). In comparison to nonconfined Pd-Tween80, Pd@VP2 exhibited an enhanced activity in the reduction of 4-NP to 4-AP thanks to the confinement effects including the high dispersion of Pd NPs and high effective concentration of substrates in confined space. Furthermore, Pd@VP2 was immobilized on GO sheets (i.e. Pd@VP2/GO) via a simple mixing method. It showed a slight decline on catalytic activity across four runs, hinting the stable and reusable capability of Pd@VP2/GO. This work potentially created a facile and environment-friendly route to construct an immobilized catalytic nanoreactor based on viral protein cages with the cheerful prospects in sustainable and green chemistry. 

Hermans I

Method for in-vitro preparation of double-layered virus-like particles of rotavirus

Publisher's Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations