key: cord-0001880-pdxm0iiw
authors: Xiong, Siping; Tang, Qi; Liang, Xudong; Zhou, Tingting; Yang, Jin; Liu, Peng; Chen, Ya; Wang, Changjun; Feng, Zhenqing; Zhu, Jin
title: A Novel Chimeric Anti-PA Neutralizing Antibody for Postexposure Prophylaxis and Treatment of Anthrax
date: 2015-07-02
journal: Sci Rep
DOI: 10.1038/srep11776
sha: c59c9a2c6315ed5aa7c437d1943fd94518119fd8
doc_id: 1880
cord_uid: pdxm0iiw

Anthrax is a highly lethal infectious disease caused by the bacterium Bacillus anthracis, and the associated shock is closely related to the lethal toxin (LeTx) produced by the bacterium. The central role played by the 63 kDa protective antigen (PA63) region of LeTx in the pathophysiology of anthrax makes it an excellent therapeutic target. In the present study, a human/murine chimeric IgG mAb, hmPA6, was developed by inserting murine antibody variable regions into human constant regions using antibody engineering technology. hmPA6 expressed in 293F cells could neutralize LeTx both in vitro and in vivo. At a dose of 0.3 mg/kg, it could protect all tested rats from a lethal dose of LeTx. Even administration of 0.6 mg/kg hmPA6 48 h before LeTx challenge protected all tested rats. The results indicate that hmPA6 is a potential candidate for clinical application in anthrax treatment.

The bacterium Bacillus anthracis, which primarily affects livestock but can also infect humans, is the causative agent of anthrax, a zoonotic disease and bioterrorism threat 1, 2 . B. anthracis spores can be used as bioterror agents in biological warfare. This threat has spurred significant efforts toward the development of countermeasures for anthrax, including anthrax vaccines and therapeutics 3 . However, vaccines are effective only for prevention 4 . Currently, therapeutic antibodies that target the anthrax toxin are under development and are designed to protect against the disease.

B. anthracis secretes a tripartite toxin comprising a protective antigen (PA), lethal factor (LF), and edema factor (EF) 5 . This is an A-B (or "binary") bacterial toxin. PA is the "B" subunit, which is responsible for cell surface binding, while LF and EF are A subunits responsible for the enzymatic activity of the toxin 6, 7 . PA combined with LF or EF constitutes the lethal toxin (LeTx) or edema toxin (EdTx), respectively 8 . The first step in cellular intoxication involves binding of an 83 kD form of PA (PA83) to specific cell surface receptors (ANTXR1 9 and ANTXR2 10 ). Following receptor binding, PA83 is cleaved after the Arg-Lys-Lys-Arg sequence at amino acid position 167 by a furin-family protease. This results in a 63 kDa form (PA63) that spontaneously oligomerizes to either a heptamer or an octamer [11] [12] [13] . Dissociation of the 20 kDa form (PA20) from PA83 allows PA63 to bind to either or both EF and LF. Then, oligomeric PA63-receptor complexes translocate LF or EF into the cytosol, where they promote intoxication 14 .

Previous studies have shown that PA63 inserts stably and irreversibly into lipid bilayers to form ion-permeable channels 15, 16 . Other research has shown that the protease cleavage site deletion or mutation in PA83 prevents EF and LF binding 17, 18 , and that for cells treated with lysosomotropic agents, the ability of PA to mediate the actions of EF or LF is blocked 19 . Nasal immunization of mice with a mixture of PA63, LF, and a poly-γ -d-glutamic acid conjugate have been shown to exhibit strong antibody responses against all three antigens 20 . Thus, PA63 seems to be an ideal target fragment for antibody generation and selection.

Since passive immunization with protective antibodies can provide immediate and extensive protection independent of the host response, it is an attractive option to enhance the current postexposure treatment of anthrax. Especially with regard to biodefense, it is considered the primary available therapeutic measure 21 . During the past 10 years, extensive research has focused on development of therapeutic antibodies to target the main virulence factors of anthrax, namely, PA, LF, EF, and capsule [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] . Among these, PA plays a central role in the pathophysiology of anthrax and is an excellent therapeutic target. Further, PA63 is the most important part of PA.

In the present study, we developed murine IgG neutralizing antibodies that directly target PA63. Then, we selected an ideal antibody from among these and genetically recombined it to form human/murine chimeric IgG (coded "hmPA6"). hmPA6 could specifically bind to PA63 and protect J774A.1 cells against LeTx challenge in vitro. Further, it protected Fischer 344 rats (F344) from LeTx after challenge.

ELISA was performed to test the binding sensitivity of hmPA6 to PA63. hmPA6 recognized rPA63 in a dose-dependent manner, and the graph of hmPA6 concentration and absorbance at 450 nm was a hyperbolic curve (Fig. 1 ).

Western blot analysis showed that hmPA6 could specifically recognize rPA63 (Fig. 2) .

No reaction was seen with the negative control.

Immunoprecipitation. Immunoprecipitation was performed using PA83, which could be split to active PA63 using trypsin. A protein of about 63 kDa was detected on SDS-PAGE, and its sequence matched that of the B. anthracis protective antigen in the Swiss-Prot database (Fig. 3A,C,D) . A 63 kDa membrane protein was also detected using a commercial anti-PA antibody (Fig. 3B) , and this protein did not reaction with any other antibodies.

Kinetics of binding. The equilibrium dissociation constant (Kd) for hmPA6 was determined by BiaCoreX100 analysis. The rate constants kon and koff were evaluated directly from the BiaCoreX100 sensogram. The Kd was also determined using the BiaCoreX100. One striking feature of hmPA6 is its very slow off rate, which may explain its high affinity of 1.438 × 10 −10 M (Fig. 4) . In vitro LeTx neutralization assay. The ability of hmPA6 to protect against LeTx was assessed in J774A.1 cells. hmPA6, PA83, and different concentrations of LF were simultaneously added to cells. Cell viability test results indicated that hmPA6 could completely neutralize LeTx. At 10 μ g/mL LF and 0.1 μ g/mL PA83, > 80% of the hmPA6-treated cells remained viable, while only 26% of the control IgG antibody-treated cells remained viable. At 0.01 μ g/mL LF and 0.1 μ g/mL PA83, 100% of the hmPA6-treated cells were viable, while only 50% (Fig. 5 ) of the control cells were.

Protection of F344 rats. F344 rats were injected hmPA6 antibody via the tail vein either before or after LeTx injection. The survival time of group III was significantly (P < 0.001) longer than that in groups I and II. Until the last observation, all group IV rats were alive (Fig. 6A ). Rats injected hmPA6 5 min before LeTx showed similar results. A dose of 45 μ g antibody protected the rates from death ( Fig. 6B) , although some symptoms, such as accelerated breathing and lethargy, were observed in one rat. hmPA6 injection before or after LeTx administration protected all rats from developing anthrax (Fig. 6C) .

The prophylactic function of hmPA6 was tested by injection of the antibody at different times before LeTx injection. In the groups that received prophylaxis 5 min to 48 h before LeTx injection, 6 rats remained alive (Fig. 6D ). When hmPA6 was injected before PA, it protected rats from anthrax death regardless of LF injection time (Fig. 6E ).

Tissue pathology and immunohistochemical analysis. The lung of the rats were pathologically and immunohistochemically examined. H&E staining showed that the local tissue of rats injected only LeTx showed greater alveolar exudation (Fig. 7c ) than untreated control rats (Fig. 7a) . However, the group that received LeTx + 45 μ g hmPA6 (Fig. 7b) showed no significant differences from untreated control rats.

Since anthrax receptors were expressed in some cells including alveolar epithelial cells, cell binding to PA could be positive. When rats were injected with LeTx, the cells could dectect PA. Further, the positive staining was mainly localized to the membrane. A strong positive reaction was found in the group injected only LeTx (Fig. 7f) , while a weak positive reaction was found in the group injected LeTx + 45 μ g hmPA6 (Fig. 7e) . The untreated control group showed a negative reaction (Fig. 7d ).

This study revealed two major findings: First, the human/murine chimeric antibody hmPA6 can neutralize LeTx in vivo and can be used for prohylaxis before LeTx is released in the blood. Second, since immunization with PA63 produces neutralizing antibody, it can be used to immunize animals. In the present study, we developed four murine mAbs that could well neutralize LeTx in vitro, and one clone was selected to form a human/mouse chimeric antibody known as hmPA6. This antibody showed excellent neutralization both in vitro and in vivo. The current status of therapeutic mAbs was directed against the major virulence factors: PA, LF, EF and capsule. Although LF could induce cell death, its effective result in vivo was unsatisfactory. PA was the critical factor which recognized cell membrane receptors. Then PA was cleaved to active PA63 by Furin which induced LF or EF into cells. Our strategy was to get antibody against active PA63. To immunize the mice, we used PA63, which is formed by the dissociation of PA20 from PA83, instead of PA83, because although PA63 is a part of PA83, these factors may have different structures and expose LF-or EF-binding sites. These differences may in turn lead to the production of completely different antibodies against anthrax in vivo. In the present study, we showed that PA63 could induce neutralizing antibodies, as proven through in vitro and vivo experiments. On the other hand, it was difficult to obtain active PA63 based on present methods. We screened out positive clones by active PA63 in a different way. Based on traditional ELISA, we coated plates with alive J774A.1 cells overninght at cell culture condition. Then PA83 was added into wells incubated about 2 h. The negative control was cells without PA83 adding. The rest of ELISA procedures was as normal. In this screening system, the active PA63 was more closed to in vivo state and could oligomerize to heptamer. In all, more diversity antibodies was generated in the immunization stage and more effective antibodies was obtained in the screening system.

Anthrax, whether resulting from natural or bioterrorist-associated exposure, is a constant threat to human health 23 , and the low incidence of anthrax suggests that large-scale vaccination may not be the most efficient means of controlling this disease. Passive immunization with protective antibodies is therefore considered the primary available biodefense measure 21 , especially in bioterrorist-associated exposure. In the present study, hmPA6 was found to provide good protection in rats challenged with anthrax virulence factors. In the in vitro experiment, hmPA6 maintained 100% cell viability with 0.01 μ g/mL LF and 0.1 μ g/mL PA83, while non-correlated IgG maintained only 50% cell viability. Further, with 10 μ g/mL LF and 0.1 μ g/mL PA83, hmPA6 maintained > 80% cell viability, while the control antibody maintained only 26%. Moreover, in previous study, they often used F344 rats challenged with LeTx (Table 1) before tested with B. anthracis spores. Therefore F344 rats was injected with LeTx vial tail vain. The hmPA6 with a Kd of 0.14 nM protected all rats from death at a concentration of 0.3 mg/kg (45 μ g per rat). However, in a previous study, 1.5 mg/kg raxibacumab (of human origin) with a Kd of 2.78 nM was administered 24 h before anthrax lethal toxin administration in F344 rats 24 . We also tested an hmPA6 concentration of 0.6 mg/kg (90 μ g per rat) administered 48 h before LeTx injection; this dose also protected all rats. Our findings indicate that hmPA6 may be used as a prophylactic. Other humanized or chimeric mAbs have been examined in other animal model, but the affinity found in the present study is the same as or better than those found previously 32, 33 . Murine mAbs against PA have been developed, but our chimeric mAb maintains a balance between the high-affinity murine component and the low-immunogenicity human component. Other mAbs of human origin are available but are difficult to produce and are expensive 32 . The chimeric mAb hmPA6 is produced in 293F cells, and the method of production is very convenient.

In the in vivo test in the present study, irrespective of whether LF was injected before or after hmPA6, the antibody protected the rats from death provided that it was administered before or simultaneously with PA. This finding indicated that hmPA6 could not prevent LF from binding PA63. Further, no morphological changes were observed in the rats of only injection LeTx, probably because the time between injection and sacrifice was very short (only about 90 mins), and no histological changes occurred in this period. The IHC analysis showed a strong positive result in the group injected only LeTx. However, the group that received LeTx + 45 μ g hmPA6 showed a weakly positive reaction. These findings indicate that hmPA6 prevents PA from binding to cell receptors. However, further experiments are required to validate this hypothesis.

Future studies should focus on detailed characterization of this mAb (specificity, toxicity studies, autoantigen testing, etc.). Second, epitope mapping and structure function analysis of hmPA6 should be performed. In the in vivo experiment in the present study, we demonstrated that hmPA6 could not interfere with LF binding to PA. Further experimentation is needed to determine the exact mechanism by which hmPA6 neutralizes LeTx. Lastly, more animal tests are required, for example, in which animals are challenged with anthrax spores.

In summary, we reported a human/murine chimeric IgG, namely, hmPA6, which can specifically identify PA with high affinity, neutralize LeTx, and protect macrophages and F344 rats from anthrax-related death. We also showed that PA63 is a good immunogen. From our findings, we believe that once hmPA6 is further characterized, it can be used alone or in combination with other neutralizing mAbs for treatment of anthrax. 

BL21 by using the pColdII vector and purified by affinity chromatography. Six BALB/c mice aged 7 weeks were intraperitoneally (ip) immunized with rPA63 and adjuvant as described previously 34 . After immunization, the mouse spleen showing the best titer was removed, and splenocytes were extracted and fused with SP2/0 myeloma cells using hybridoma technology 35 . Positive clones were screened by ELISA using active PA63-coated 96-well plates, and subcloning was conducted based on standard protocols. Clonal expansion was conducted with Hybridoma-SFM (Gibco,USA). The cell supernatant was then removed and purified by affinity chromatography with protein G (GE, USA) according to the manufacturer's purification system. Figure 6 . In vivo LeTx neutralization assay in F344 rats. A. Mean survival time. LeTx and the antibody were simultaneously injected via the tail vein. Group I, 0 μ g hmPA6 + 30 μ g LeTx; group II, 15 μ g hmPA6 + 30 μ g LeTx; group III, 30 μ g hmPA6 + 30 μ g LeTx; group IV, 45 μ g hmPA6 + 30 μ g LeTx. ***P < 0.001. B. Different concentrations of the antibody were injected, and LeTx was injected 5 min later via the tail vein. C. For each rat, 45 μ g antibody was injected before (− 5 min), after (5 min), or simultaneously (0 min) with LeTx. D. For each rat, 90 μ g antibody was injected at different times before LeTx injection. E. Group I, PA (30 μ g) was injected 5 min after LF (30 μ g) + hmPA6 (45 μ g); group II, PA (30 μ g) was injected 5 min before LF (30 μ g) + hmPA6 (45 μ g). All experiments involving animals were performed in accordance with the protocols approved by the Animal Care and Use Committee of the National Institute of Allergy and Infectious Diseases, National Institutes of Health, USA.

Total RNA was extracted from the PA6 hybridoma cells using the TRIzol reagent (Invitrogen), and cDNA was synthesized using reverse transcriptase SuperScript II according to the manufacturer's instructions. Eukaryotic vectors were constructed by separately cloning PA6 heavy and light variable regions into pTH and pTL, which respectively include constant regions of IgG1 heavy and light chains. Murine variable regions of the heavy (V H ) and light chains (V L ) were first amplified by PCR using PA6 cDNA as the template. To obtain V H and V L nucleotide sequences, these chains were cloned into the pMD-18T vector. PCR primers were designed using the In-FusionR HD Cloning Kit (Clontech), and V H and V L were amplified from right-sequenced pMD-18T vectors by using these primers. Finally, V H and V L were separately cloned into linearized pTH and pTL vectors, respectively, by infusion PCR using the In-FusionR HD Cloning Kit. The recombinant ELISA. Ninety-six-well enzyme immunoassay plates were coated overnight at 4 °C with 50 μ L of rPA63 antigen (2 μ g/mL) diluted in 50 mM sodium carbonate buffer (pH 9.6). The plates were blocked and serial two-fold dilutions of hmPA6 were added to the wells (3 wells for each concentration) as the primary antibody. The plates were incubated at 37 °C for 1 h and then washed 3 times with 300 μ L of PBS containing 0.05% Tween 20 (PBST). Subsequently, goat anti-human IgG-HRP conjugate (Sigma) was added as the secondary antibody and incubated at 37 °C for 30 min. After color development, the absorbance values of the wells were detected at 450 nm. Non-correlated IgG1 was used as the control. The absorbance values at 450 nm of hmPA6 were plotted using GraphPad Prism software version 5.0 (GraphPad Software, Inc., La Jolla, CA, USA).

The cell lysates of rPA63 recombinant bacteria and E. coli BL21 were separately run on a 10% SDS-PAGE gel and then transferred onto a nitrocellulose membrane (Bio-Rad).

The membrane was blocked with PBS containing 5% dry milk at 4 °C overnight and then incubated for 1 h at RT with 1:2000 diluted hmPA6 from 1 mg/mL stock. After it was washed 3 times with PBST, the membrane was incubated with a 1:4000 diluted secondary HRP-conjugated goat anti-human antibody (Sigma) for an additional 30 min at RT. Following the same washing procedure, the signal was detected using ECL Western Blot Substrate (Pierce) according to the manufacturer's instructions.

(pH 8.0) and 150 mM NaCl] with 0.5 μ g/mL trypsin (Sigma) for 30 min at 22 °C, followed by addition of 10 μ g/mL soybean trypsin inhibitor (Sigma) 14 . Then, the mixture was incubated with 5 μ g of hmPA6 at 4 °C and rotated for 3 h. Next, 50 μ l protein-A Sepharose (Invitrogen, USA) was added and incubated at 4 °C. The immune complexes that formed were washed 3 times with PBST. Subsequently, 50 μ L elution buffer was added to separate these antibody-antigen complexes from protein-A Sepharose. As a negative control, another anti-TLR4 chimeric antibody (generated by our lab) was created using the same protocol. The protein complexes were isolated by running two 10% SDS-PAGE gels; one was transferred onto a nitrocellulose membrane, and the other was stained with Coomassie blue. The nitrocellulose membrane was blocked at 4 °C overnight, incubated with 1:5000 diluted rabbit polyclonal anti-PA antibody (Pierce, USA) for 1 h at RT, washed with PBST 3 times, and reacted with 1:4000 diluted goat anti-rabbit IgG-HRP conjugate (Sigma) for an additional 30 min at RT. The membrane was washed 3 times with PBST, and the hybridization signal was detected using ECL Western Blot substrate. The target bands on SDS-PAGE gel were subjected to mass spectra identification with an ABI 4700 proteomics analyzer and MALDI-TOF/TOF mass spectrometer (Applied Biosystems, Framingham, MA). The mass spectra were then searched within the Swiss-Prot database using the MASCOT search engine (http://www.matrix science.com; Matrix Science, UK).

Affinity and kinetic assay of antibody. The Biacore X100 System (GE, USA) was used to analyze the affinity and kinetics of the hmPA6 antibody. PA83 was diluted to 25 μ g/mL with acetate buffer (10 mM NaAc, pH 4.5) and immobilized on the surface of a CM5 sensor chip (GE, USA) to capture purified mAb, which was diluted in running buffer (10 mM HEPES, 150 mM NaCl, 5 mM EDTA-Na 2 , 0.05% P20; pH 7.4) to achieve different concentrations ranging from 5 to 80 nmol/L. The association time was set up at 180 s and the dissociation time, at 600 s, followed by regeneration with 50 mM glycine-HCl (pH 2.2). Sensograms were evaluated using the Biacore X100 evaluation software.

In vitro LeTx neutralization assay. The in vitro LeTx neutralization assay was performed as described previously 29 injected via the tail vein with a mixture of PA + LF (LeTx) and different amounts of hmPA6 antibody prepared in sterile PBS. Each rat was administered 300 μ L of the mixture. Further, the rats were also treated with different concentrations of the antibody 5 min before exposure to LeTx. For this experiment, they were injected intravenously with PBS or 15, 30, or 45 μ g of the antibody before receiving an intravenous injection of LeTx (30 μ g PA + 30 μ g LF). Additionally, double the complete protection dose of antibody (90 μ g) was injected to test its prophylactic ability. The rats were inoculated with 90 μ g antibody followed by LeTx administration after different times, from 5 min to 48 h. Two additional experiments were conducted with F344 rats. One group received PA (30 μ g) injection 5 min after LF + hmPA6 (30 μ g + 45 μ g, respectively), while the other received 30 μ g PA 5 min before LF + hmPA6 (at the same doses). After injection of LeTx, signs of malaise and death were checked for every 30 min for the first 8 h and then at 16 h and 24 h, followed by twice-daily checks for 1 week.

Tissue pathology and immunohistochemical examination. The lungs of the F344 rats were embedded in paraffin wax at the Department of Pathology, Nanjing Medical University (Jiangsu, China), using routine methods. Sections (5 μ m) were deparaffinized with xylene and then dehydrated in decreasing concentrations of alcohol. Some sections were treated with H&E staining and examined by light microscopy to determine the pathological features of the lung tissues.

For the remaining sections, endogenous peroxidase activity was blocked by incubation with 3% hydrogen peroxidase in Tris-buffered saline. Some of these tissue sections were then incubated with rabbit polyclonal anti-PA primary antibody (Pierce, USA), followed by the EnVision HRP complex (DAKO, Carpinteria, CA). They were then counterstained with hematoxylin QS (Vector Laboratories, Burlingame, CA). The results were analyzed according to the IHC score (IHS) as described previously 36 . Briefly, the IHS was determined by evaluation of both staining density and intensity. Multiplication of the intensity and percentage scores yielded the final IHS. Samples with IHS ≤ 3 were considered weakly positive, while those with IHS ≥ 6 were considered strongly positive. The IHC results were evaluated by two independent investigators blinded to the rat groups. In cases of conflict, a pathologist reviewed the cases, and a consensus was reached.

Survival data were analyzed using the GraphPad Prism version 4 statistical analysis software (San Diego, CA). A t-test was used to compare the mean survival time between groups. A two-tailed log rank test was used to determine the statistical significance of differences between groups. A P value of < 0.05 was considered statistically significant.

A human/murine chimeric fab antibody neutralizes anthrax lethal toxin in vitro

Mouse monoclonal antibodies to anthrax edema factor protect against infection

Analysis of defined combinations of monoclonal antibodies in anthrax toxin neutralization assays and their synergistic action

An efficient method to make human monoclonal antibodies from memory B cells: potent neutralization of SARS coronavirus

Anthrax-toxin-mediated delivery of a 19 kDa antigen of Mycobacterium tuberculosis into the cytosol of mammalian cells

Binary bacterial toxins: biochemistry, biology, and applications of common Clostridium and Bacillus proteins

Antibodies against anthrax: mechanisms of action and clinical applications

Consequences and utility of the zinc-dependent metalloprotease activity of anthrax lethal toxin

Identification of the cellular receptor for anthrax toxin

Human capillary morphogenesis protein 2 functions as an anthrax toxin receptor

A receptor-based switch that regulates anthrax toxin pore formation

Structure and function of anthrax toxin

Anthrax toxin

Anthrax protective antigen: prepore-to-pore conversion

Anthrax toxin protective antigen: low-pH-induced hydrophobicity and channel formation in liposomes

pH-dependent permeabilization of the plasma membrane of mammalian cells by anthrax protective antigen

Anthrax toxin protective antigen is activated by a cell surface protease with the sequence specificity and catalytic properties of furin

A deleted variant of Bacillus anthracis protective antigen is non-toxic and blocks anthrax toxin action in vivo

Cleavage of structural proteins during the assembly of the head of bacteriophage T4

Nasal immunization with the mixture of PA63, LF, and a PGA conjugate induced strong antibody responses against all three antigens

Passive antibody administration (immediate immunity) as a specific defense against biological weapons

Human monoclonal antibodies against anthrax lethal factor and protective antigen act independently to protect against Bacillus anthracis infection and enhance endogenous immunity to anthrax

Efficient neutralization of anthrax toxin by chimpanzee monoclonal antibodies against protective antigen

Raxibacumab for the treatment of inhalational anthrax

Human monoclonal antibody AVP-21D9 to protective antigen reduces dissemination of the Bacillus anthracis Ames strain from the lungs in a rabbit model

Prophylaxis and therapy of inhalational anthrax by a novel monoclonal antibody to protective antigen that mimics vaccine-induced immunity

A high-affinity monoclonal antibody to anthrax protective antigen passively protects rabbits before and after aerosolized Bacillus anthracis spore challenge

In vitro and in vivo characterization of anthrax anti-protective antigen and anti-lethal factor monoclonal antibodies after passive transfer in a mouse lethal toxin challenge model to define correlates of immunity

Neutralizing monoclonal antibody against anthrax lethal factor inhibits intoxication in a mouse model

An anthrax lethal factor-neutralizing monoclonal antibody protects rats before and after challenge with anthrax toxin

Protective and immunochemical activities of monoclonal antibodies reactive with the Bacillus anthracis polypeptide capsule

Monoclonal antibody therapies against anthrax

Protection against anthrax toxin by recombinant antibody fragments correlates with antigen affinity

A high-affinity human/mouse cross-reactive monoclonal antibody, specific for VEGFR-2 linear and conformational epitopes

Derivation of specific antibody-producing tissue culture and tumor lines by cell fusion

A Novel LMP1 Antibody Synergizes with Mitomycin C to Inhibit Nasopharyngeal Carcinoma Growth in Vivo Through Inducing Apoptosis and Downregulating Vascular Endothelial Growth Factor

Production and characterization of monoclonal antibodies against the lethal factor component of Bacillus anthracis lethal toxin

Novel chimpanzee/human monoclonal antibodies that neutralize anthrax lethal factor, and evidence for possible synergy with anti-protective antigen antibody

This work is supported by the National Natural Science Foundation (No. 31170884).and Science Fund of Jiangsu Province, China (No. BK2012527 and No. CWS11J257)

S.X., J.Z., Z.F. and Q.T. wrote the main manuscript text and S.X. and X.L. prepared figures 1-3 and Q.T. and S.X. prepared figures 4-7. All authors reviewed the manuscript.

Competing financial interests: Dr. Zhu, Dr. Feng, Qi Tang and Siping Xiong have a common patent 103789270A issued in China. All other authors report no conflicts.